91 Commits (ba09e7a23f425c70fa372fa20a206bb6abb7cfde)

Author	SHA1	Message	Date
Richard Mudgett	b7ec070cd7	res_pjsip: Add ignore_uri_user_options option. ... This implements the chan_sip legacy_useroption_parsing option but with a better name. * Made the caller-id number and redirecting number strings obtained from incoming SIP URI user fields always truncated at the first semicolon. People don't care about anything after the semicolon showing up on their displays even though the RFC allows the semicolon. ASTERISK-26316 #close Reported by: Kevin Harwell Change-Id: Ib42b0e940dd34d84c7b14bc2e90d1ba392624f62	9 years ago
Alexei Gradinari	56b4112659	res_pjsip_pubsub: fixed a bug when pjsip_tx_data_dec_ref is called twice. ... This patch removed call of pjsip_tx_data_dec_ref in send_notify if send_request failed. The pjsip_dlg_send_request deletes the message on error by itself. It seems this patch fixes next issues: ASTERISK-26199 ASTERISK-26166 ASTERISK-26174 Change-Id: I8b05917c93d993f95d604c042ace5f1a5500f59a	9 years ago
Matt Jordan	c49833653b	res/res_pjsip_pubsub: Add additional debug statements ... When something very sad and wrong occurs, it's challenging sometimes to figure out why. This patch adds some additional debug statements on off-nominal paths to try and make debugging easier. Change-Id: I7bffb73cc733b6f80193a23340881db4a102b640	9 years ago
George Joseph	b57cd01404	res_pjsip_pubsub: Address SEGV when attempting to terminate a subscription ... Occasionally under load we'll attempt to send a final NOTIFY on a subscription that's already been terminated and a SEGV will occur down in pjproject's evsub_destroy function. This is a result of a race condition between all the paths that can generate a notify and/or destroy the underlying pjproject evsub object: * The client can send a SUBSCRIBE with Expires: 0. * The client can send a SUBSCRIBE/refresh. * The subscription timer can expire. * An extension state can change. * An MWI event can be generated. * The pjproject transaction timer (timer_b) can expire. Normally when our pubsub_on_evsub_state is called with a terminate, we push a task to the serializer and return at which point the dialog is unlocked. This is usually not a problem because the task runs immediately and locks the dialog again. When the system is heavily loaded though, there may be a delay between the unlock and relock during which another event may occur such as the subscription timer or timer_b expiring, an extension state change, etc. These may also cause a terminate to be processed and if so, we could cause pjproject to try to destroy the evsub structure twice. There's no way for us to tell that the evsub was already destroyed and the evsub's group lock can't tolerate this and SEGVs. The remedy is twofold. * A patch has been submitted to Teluu and added to the bundled pjproject which adds add/decrement operations on evsub's group lock. * In res_pjsip_pubsub: * configure.ac and pjproject-bundled's configure.m4 were updated to check for the new evsub group lock APIs. * We now add a reference to the evsub group lock when we create the subscription and remove the reference when we clean up the subscription. This prevents evsub from being destroyed before we're done with it. * A state has been added to the subscription tree structure so termination progress can be tracked through the asyncronous tasks. * The pubsub_on_evsub_state callback has been split so it's not doing double duty. It now only handles the final cleanup of the subscription tree. pubsub_on_rx_refresh now handles both client refreshes and client terminates. It was always being called for both anyway. * The serialized_on_server_timeout task was removed since serialized_pubsub_on_rx_refresh was almost identical. * Missing state checks and ao2_cleanups were added. * Some debug levels were adjusted to make seeing only off-nominal things at level 1 and nominal or progress things at level 2+. ASTERISK-26099 #close Reported-by: Ross Beer. Change-Id: I779d11802cf672a51392e62a74a1216596075ba1	9 years ago
Richard Mudgett	5b7b16a87f	res_pjsip_pubsub.c: Recreate subscriptions using distributor serializer. ... * Resolves potential reentrancy problems if system restarted in the middle of subscription message transactions. * Fixes memory leak recreating persistent subscriptions when the subscription resource tree could not be created. ASTERISK-26088 Reported by: Richard Mudgett Change-Id: I71e34d7ae8ed35a694f1030e820e2548c48697be	9 years ago
Richard Mudgett	c2ae49249c	res_pjsip_pubsub.c: Use distributor serializer for incoming subscriptions. ... We must continue using the serializer that the original SUBSCRIBE came in on for the dialog. There may be retransmissions already enqueued in the original serializer that can result in reentrancy and message sequencing problems. The "sip_transaction Unable to register SUBSCRIBE transaction (key exists)" message is a notable symptom of this issue. Outgoing subscriptions still create the pjsip/pubsub/<endpoint> serializers for their dialogs. ASTERISK-26088 Reported by: Richard Mudgett Change-Id: I18b00bb74a56747b2c8c29543a82440b110bf0b0	9 years ago
Joshua Colp	d03e170ae7	res_pjsip_pubsub: Use common datastores container API. ... This migrates res_pjsip_pubsub over to using the newly introduce common datastores management API instead of using its own implementations for both subscriptions and publications. As well the extension state data now provides a generic datastores container instead of a subscription. This allows the dialog-info+xml body generator to work for both subscriptions and publications. ASTERISK-25999 #close Change-Id: I773f9e4f35092da0f653566736a8647e8cfebef1	9 years ago
Joshua Colp	bc19d9a2b0	Merge "res_pjsip_exten_state: Check if body generator is available."	9 years ago
Joshua Colp	d57847a7c7	Merge "res_pjsip_pubsub.c: Fix body generator registration race."	9 years ago
Richard Mudgett	0b5292525c	res_pjsip_exten_state: Check if body generator is available. ... When starting the extension state publishers, check if the requested message body generator is available. If not available give error message and skip starting that publisher. * res_pjsip_pubsub.c: Create new API if type/subtype generator registered. * res_pjsip_exten_state.c: Use new body generator API for validation. ASTERISK-25922 Change-Id: I4ad69200666e3cc909d4619e3c81042d7f9db25c	9 years ago
Richard Mudgett	3af83ea2fb	res_pjsip_pubsub.c: Add useful information to some messages. ... Change-Id: Ia0b2e15773894c599e5c5748bbc70e99f434192a	9 years ago
Richard Mudgett	8e1b663b87	res_pjsip_pubsub.c: Fix body generator registration race. ... Change-Id: Id8752073ef06472a2fd96080f4009fac42843e67	9 years ago
George Joseph	e2524fcee3	res_pjsip_mwi: Add voicemail extension and mwi_subscribe_replaces_unsolicited ... res_pjsip_mwi was missing the chan_sip "vmexten" functionality which adds the Message-Account header to the MWI NOTIFY. Also, specifying mailboxes on endpoints for unsolicited mwi and on aors for subscriptions required that the admin know in advance which the client wanted. If you specified mailboxes on the endpoint, subscriptions were rejected even if you also specified mailboxes on the aor. Voicemail extension: * Added a global default_voicemail_extension which defaults to "". * Added voicemail_extension to both endpoint and aor. * Added ast_sip_subscription_get_dialog for support. * Added ast_sip_subscription_get_sip_uri for support. When an unsolicited NOTIFY is constructed, the From header is parsed, the voicemail extension from the endpoint is substituted for the user, and the result placed in the Message-Account field in the body. When a subscribed NOTIFY is constructed, the subscription dialog local uri is parsed, the voicemail_extension from the aor (looked up from the subscription resource name) is substituted for the user, and the result placed in the Message-Account field in the body. If no voicemail extension was defined, the Message-Account field is not added to the NOTIFY body. mwi_subscribe_replaces_unsolicited: * Added mwi_subscribe_replaces_unsolicited to endpoint. The previous behavior was to reject a subscribe if a previous internal subscription for unsolicited MWI was found for the mailbox. That remains the default. However, if there are mailboxes also set on the aor and the client subscribes and mwi_subscribe_replaces_unsolicited is set, the existing internal subscription is removed and replaced with the external subscription. This allows an admin to configure mailboxes on both the endpoint and aor and allows the client to select which to use. ASTERISK-25865 #close Reported-by: Ross Beer Change-Id: Ic15a9415091760539c7134a5ba3dc4a6a1217cea	9 years ago
George Joseph	d2eb65f71e	res_pjsip: Strip spaces from items parsed from comma-separated lists ... Configurations like "aors = a, b, c" were either ignoring everything after "a" or trying to look up " b". Same for mailboxes, ciphers, contacts and a few others. To fix, all the strsep(&copy, ",") calls have been wrapped in ast_strip. To facilitate this, ast_strip, ast_skip_blanks and ast_skip_nonblanks were updated to handle null pointers. In some cases, an ast_strlen_zero() test was added to skip consecutive commas. There was also an attempt to ast_free an ast_strdupa'd string in ast_sip_for_each_aor which was causing a SEGV. I removed it. Although this issue was reported for realtime, the issue was in the res_pjsip modules so all config mechanisms were affected. ASTERISK-25829 #close Reported-by: Mateusz Kowalski Change-Id: I0b22a2cf22a7c1c50d4ecacbfa540155bec0e7a2	9 years ago
George Joseph	ba8adb4ce3	res_pjsip/config_transport: Allow reloading transports. ... The 'reload' mechanism actually involves closing the underlying socket and calling the appropriate udp, tcp or tls start functions again. Only outbound_registration, pubsub and session needed work to reset the transport before sending requests to insure that the pjsip transport didn't get pulled out from under them. In my testing, no calls were dropped when a transport was changed for any of the 3 transport types even if ip addresses or ports were changed. To be on the safe side however, a new transport option was added (allow_reload) which defaults to 'no'. Unless it's explicitly set to 'yes' for a transport, changes to that transport will be ignored on a reload of res_pjsip. This should preserve the current behavior. Change-Id: I5e759850e25958117d4c02f62ceb7244d7ec9edf	9 years ago
Joshua Colp	5c400a0fed	res_pjsip_pubsub: Move where the subscription is stored to after initialized. ... A problem arose when testing the AMI subscription listing actions where it was possible for a subscription that had not been fully initialized to be listed. This was problematic as the underlying listing code would crash. This change makes it so the subscription tree is fully set up before it is added to the list of subscriptions. This ensures that when the listing actions get the subscription it is valid. ASTERISK-25738 #close Change-Id: Iace2b13641c31bbcc0d43a39f99aba1f340c0f48	9 years ago
Mark Michelson	b073244c51	res_pjsip_pubsub: Prevent crash from AMI command on freed subscription. ... A test recently uncovered that running an ill-timed AMI command to show inbound subscriptions could cause a crash since Asterisk will try to operate on a freed subscription. The fix for this is to remove the subscription tree from the list of subscriptions at the time that we are sending our final NOTIFY request out. This way, as the subscription is in the process of dying, it is inaccessible from AMI. Change-Id: Ic0239003d8d73e04c47c12dd2a7e23867e5b5b23	9 years ago
Richard Mudgett	0bca2a5c26	res_pjsip: Create human friendly serializer names. ... PJSIP name formats: pjsip/aor/<aor>-<seq> -- registrar thread pool serializer pjsip/default-<seq> -- default thread pool serializer pjsip/messaging -- messaging thread pool serializer pjsip/outreg/<registration>-<seq> -- outbound registration thread pool serializer pjsip/pubsub/<endpoint>-<seq> -- pubsub thread pool serializer pjsip/refer/<endpoint>-<seq> -- REFER thread pool serializer pjsip/session/<endpoint>-<seq> -- session thread pool serializer pjsip/websocket-<seq> -- websocket thread pool serializer Change-Id: Iff9df8da3ddae1132cb2ef65f64df0c465c5e084	10 years ago
Joshua Colp	b522a5e30f	res_pjsip_pubsub: Fix assertion when UAS dialog creation fails. ... When compiled with assertions enabled one will occur when destroying the subscription tree when UAS dialog creation fails. This is because the code assumes that a dialog will always exist on a subscription tree when in reality during this specific scenario it won't. This change makes it so a dialog is not removed from the subscription tree if it is not present. ASTERISK-25505 #close Change-Id: Id5c182b055aacc5e66c80546c64804ce19218dee	10 years ago
Mark Michelson	7f9823ff57	res_pjsip_pubsub: Prevent sending NOTIFY on destroyed dialog. ... A certain situation can result in our attempting to send a NOTIFY on a destroyed dialog. Say we attempt to send a NOTIFY to a subscriber, but that subscriber has dropped off the network. We end up retransmitting that NOTIFY until the appropriate SIP timer says to destroy the NOTIFY transaction. When the pjsip evsub code is told that the transaction has been terminated, it responds in kind by alerting us that the subscription has been terminated, destroying the subscription, and then removing its reference to the dialog, thus destroying the dialog. The problem is that when we get told that the subscription is being terminated, we detect that we have not sent a terminating NOTIFY request, so we queue up such a NOTIFY to be sent out. By the time that queued NOTIFY gets sent, the dialog has been destroyed, so attempting to send that NOTIFY can result in a crash. The fix being introduced here is actually a reintroduction of something the pubsub code used to employ. We hold a reference to the dialog and wait to decrement our reference to the dialog until our subscription tree object is destroyed. This way, we can send messages on the dialog even if the PJSIP evsub code wants to terminate earlier than we would like. In doing this, some NULL checks for subscription tree dialogs have been removed since NULL dialogs are no longer actually possible. Change-Id: I013f43cddd9408bb2a31b77f5db87a7972bfe1e5	10 years ago
Mark Michelson	e9e4bc9ece	res_pjsip_pubsub: Ensure dialog lock balance. ... When sending a NOTIFY, we lock the dialog and then unlock the dialog when finished. A recent change made it so that the subscription tree's dialog pointer will be set NULL when sending the final NOTIFY request out. This means that when we attempt to unlock the dialog, we pass a NULL pointer to pjsip_dlg_dec_lock(). The result is that the dialog remains locked after we think we have unlocked it. When a response to the NOTIFY arrives, the monitor thread attempts to lock the dialog, but it cannot because we never released the dialog lock. This results in Asterisk being unable to process incoming SIP traffic any longer. The fix in this patch is to use a local pointer to save off the pointer value of the subscription tree's dialog when locking and unlocking the dialog. This way, if the subscription tree's dialog pointer is NULLed out, the local pointer will still have point to the proper place and the dialog lock will be unlocked as we expect. Change-Id: I7ddb3eaed7276cceb9a65daca701c3d5e728e63a	10 years ago
Mark Michelson	b96267f7a3	res_pjsip_pubsub: Prevent crashes on final NOTIFY. ... The SIP dialog is removed from the subscription tree when the final NOTIFY is sent. However, after the final NOTIFY is sent, the persistence update function still attempts to access the cseq from the dialog, resulting in a crash. This fix removes the subscription persistence at the same time that the dialog is removed from the subscription tree. This way, there is no attempt to update persistence when the subscription is being destroyed. Change-Id: Ibb46977a6cef9c51dc95f40f43446e3d11eed5bb	10 years ago
Mark Michelson	386cd7b2b0	res_pjsip_pubsub: Remove serializer when sending final NOTIFY. ... There have been crashes seen where a taskprocessor's listener is NULL unexpectedly. Looking at backtraces, the problem was specifically seen in PJSIP serializers. Subscriptions make the mistake of removing a serializer from a dialog during subscription tree destruction. Since subscription trees are reference-counted, guaranteeing the circumstances behind the destruction are not possible. This makes it so that the dialog serializer can be removed while not holding the dialog lock. This makes it possible for the distributor to get a pointer to the dialog serializer and have that serializer get freed out from under it. The fix for this is to remove the serializer from a subscription dialog when sending the final NOTIFY. This guarantees that the serializer is removed with the dialog lock held. By doing this, we guarantee that if the distributor gains access to the dialog's serializer, it will not be possible for the serializer to get freed by another thread. Change-Id: I21f5dac33529f65cec45679bdace60670800ff66	10 years ago
Mark Michelson	0b63d011c9	res_pjsip_pubsub: Fix crash on destruction of empty subscription tree. ... If an old persistent subscription is recreated but then immediately destroyed because it is out of date, the subscription tree will have no leaf subscriptions on it. This was resulting in a crash when attempting to destroy the subscription tree. A simple NULL check fixes this problem. Change-Id: I85570b9e2bcc7260a3fe0ad85904b2a9bf36d2ac	10 years ago
Mark Michelson	ac0194dad6	res_pjsip_pubsub: Solidify lifetime and ownership of objects. ... There have been crashes and general instability seen in the pubsub code, so this patch introduces three changes to increase the stability. First, the ownership model for subscriptions has been modified. Due to RLS, subscriptions are stored in memory as a tree structure. Prior to my patch, the PJSIP subscription was the owner of the subscription tree. When the PJSIP subscription told us that it was terminating, we started destroying the subscription tree along with all of the individual leaf subscriptions that belong to the tree. The problem with this model is that the two actors in play here, the PJSIP subscription and the individual leaf subscriptions, need to have joint ownership of the subscription tree. So now, the PJSIP subscription and the individual leaf subscriptions each have a reference to the subscription tree. This way, we will not actually free memory until no players are left that care. The PJSIP subscription is a bigger stakeholder, in that if the PJSIP subscription's reference to the subscription tree is removed, the subscription tree instructs the leaf subscriptions to shut down and drop their references to the subscription tree when possible. The individual leaf subscriptions, upon being told to shut down, can drop their stasis subscriptions or whatever they use to learn of new state, and then drop their reference to the subscription tree once they are ready to die. Second, the lifetime of a PJSIP subscription's reference to our subscription tree has been altered. As I learned from doing a deep dive, the PJSIP evsub code can tell Asterisk multiple times that the subscription has been terminated, and not all of these times are especially helpful. I have altered the message flow that we use for SIP subscriptions such that we will always drop the PJSIP subscription's reference to the subscription tree when we send the NOTIFY that terminates a SIP subscription. This also means that we will now queue NOTIFY requests to be sent after responding to incoming SUBSCRIBEs so that we can have predictable state changes from the PJSIP evsub code. Third, the synchronization of operations has been improved. PJSIP can call into our code from a serializer thread (e.g. upon receiving an incoming request) or from the monitor thread (e.g. when a subscription times out). Because of this, there is the possibility of competing threads stepping on each other. PJSIP attempts to do some synchronization on its own by always keeping the dialog lock held when it calls into us. However, since we end up pushing tasks into the serializer, the result was that serialized operations were not grabbing the dialog lock and could, as a result, step on something that was being attempted by a different thread. Now we ensure that serialized operations grab the dialog lock, then check for extenuating circumstances, then proceed with their operation if they can. Change-Id: Iff2990c40178dad9cc5f6a5c7f76932ec644b2e5	10 years ago
Mark Michelson	e47396721f	res_pjsip_pubsub: Eliminate race during initial NOTIFY. ... There is a slim chance of a race condition occurring where two threads can both attempt to manipulate the same area. Thread A can be handling an incoming initial SUBSCRIBE request. Thread A lets the specific subscription handler know that the subscription has been established. At this point, Thread B may detect a state change on the subscribed resource and queue up a notification task on Thread C, the subscription serializer thread. Now Thread A attempts to generate the initial NOTIFY request to send to the subscriber at the same time that Thread C attempts to generate a state change NOTIFY request to send to the subscriber. The result is that Threads A and C can step on the same memory area, resulting in a crash. The crash has been observed as happening when attempting to allocate more space to hold the body for the NOTIFY. The solution presented here is to queue the subscription establishment and initial NOTIFY generation onto the subscription serializer thread (Thread C in the above scenario). This way, there is no way that a state change notification can occur before the initial NOTIFY is sent, and if there is a quick succession of NOTIFYs, we can guarantee that the two NOTIFY requests will be sent in succession. Change-Id: I5a89a77b5f2717928c54d6efb9955e5f6f5cf815	10 years ago
Richard Mudgett	69824fdfbf	res_pjsip_pubsub.c: Mark ast_sip_create_subscription() as not used. ... Change-Id: I2b8db18eac36c01a5c7eb9467699124e203fd093	10 years ago
Richard Mudgett	2526659432	res_pjsip_pubsub.c: Add some notification comments. ... Change-Id: Ie62ff1f4b7adc1a12fa0303f53926af249b25e20	10 years ago
Richard Mudgett	9b290dfe2f	res_pjsip_pubsub.c: Set dlg_status code instead of sending SIP response. ... We should not try to send a SIP response message because we may be restoring a persistent subscription where we are not responding to a SIP request. Change-Id: Id89167ef90320c5563f37e632db0dda6cb9e7dec	10 years ago
Richard Mudgett	73eb132012	res_pjsip_pubsub.c: Fix off-nominal memory leak. ... Fix off-nominal visited vector leak in build_resource_tree(). Change-Id: If0399c7941c9c0b1038bcfb7b9a371760977831c	10 years ago
Richard Mudgett	2b30fc2b2d	res_pjsip_pubsub.c: Fix one byte buffer overrun error. ... ast_sip_pubsub_register_body_generator() did not account for the null terminator set by sprintf() in the allocated output buffer. Change-Id: I388688a132e479bca6ad1c19275eae0070969ae2	10 years ago
Richard Mudgett	08a182c8e6	res_pjsip_pubsub.c: Use ast_alloca() instead of alloca(). ... Change-Id: Ia396096b4fedc2874649ca11137612c3f55e83e3	10 years ago
Richard Mudgett	61f30db877	res_pjsip_pubsub.c: Add missing error return in load_module(). ... Change-Id: I15debd0f717f16ee2f78e7f56151c3b3b97b72fc	10 years ago
Mark Michelson	beb568e51c	res_pjsip_pubsub: re-re-fix persistent subscription storage. ... A recent change to res_pjsip_pubsub switched to using pjsip_msg_print as a means of writing an appropriate packet to persistent storage. While this partially solved the issue, it had its own problems. pjsip_msg_print will always add a Content-Length header to the message it prints. Frequent restarts of Asterisk can result in persistent subscriptions being written with five or more Content-Length headers. In addition, sometimes some apparent corruption of individual headers could be seen. This aims to fix the problem by not running a parsed message through an interpreter but rather by taking the raw message and saving it. The logic for what to save is going to be different depending on whether a SUBSCRIBE was received from the wire or if it was pulled from persistence. When receiving a packet from the wire, when using a streaming transport, the rdata->pkt_info.packet may contain multiple SIP messages or fragments. However, the rdata->msg_info.msg_buf will always contain the current SIP message to be processed. When pulling from persistence, though, the rdata->msg_info.msg_buf will be NULL since no transport actually handled the packet. However, since we know that we will always ever pull one SIP message from persistence, we are free to save directly from rdata->pkt_info.packet instead. ASTERISK-25365 #close Reported by Mark Michelson Change-Id: I33153b10d0b4dc8e3801aaaee2f48173b867855b	10 years ago
Joshua Colp	a408369bac	res_pjsip_pubsub: On recreated notify fail deleted sub_tree is referenced ... When recreating a subscription it is possible for a freed sub_tree to be referenced when the initial NOTIFY fails to be created. Change-Id: I681c215309aad01b21d611c2de47b3b0a6022788	10 years ago
Mark Michelson	382334cc06	res_pjsip_pubsub: More accurately persist packet. ... The pjsip_rx_data structure has a pkt_info.packet field on it that is the packet that was read from the transport. For datagram transports, the packet read from the transport will correspond to the SIP message that arrived. For streamed transports, however, it is possible to read multiple SIP messages in one packet. In a recent case, Asterisk crashed on a system where TCP was being used. This is because at some point, a read from the TCP socket resulted in a 200 OK response as well as an incoming SUBSCRIBE request being stored in rdata->pkt_info.packet. When the SUBSCRIBE was processed, the combination 200 OK and SUBSCRIBE was saved in persistent storage. Later, a restart of Asterisk resulted in the crash because the persistent subscription recreation code ended up building the 200 OK response instead of a SUBSCRIBE request, and we attempted to access request-specific data. The fix here is to use the pjsip_msg_print() function in order to persist SUBSCRIBE requests. This way, rather than using the raw socket data, we use the parsed SIP message that PJSIP has given us. If we receive multiple SIP messages from a single read, we will be sure only to save off the relevant SIP message. There also is a safeguard put in place to make sure that if we do end up reconstructing a SIP response, it will not cause a crash. ASTERISK-25306 #close Reported by Mark Michelson Change-Id: I4bf16f7b76a2541d10b55de82bcd14c6e542afb2	10 years ago
Richard Mudgett	7cd99be534	PJSIP XML, XPIDF: Fix buffer size overwrite memory corruption error. ... When res_pjsip body generator modules were generating XML or XPIDF response bodies, there was a chance that the generated body would be the exact size of the supplied buffer. Adding the nul string terminator would then write beyond the end of the buffer and potentially corrupt memory. * Fix MALLOC_DEBUG high fence violations caused by adding a nul string terminator on the end of a buffer for XML or XPIDF response bodies. * Made calls to pj_xml_print() safer if the XML prolog is requested. Due to a bug in pjproject, the return value could be -1 _or_ AST_PJSIP_XML_PROLOG_LEN if the supplied buffer is not large enough. * Updated the doxygen comment of AST_PJSIP_XML_PROLOG_LEN to describe the return value of pj_xml_print() when the supplied buffer is not large enough. ASTERISK-25168 Reported by: Carl Fortin Change-Id: Id70e1d373a6a2b2bd9e678b5cbc5e55b308981de	10 years ago
Matt Jordan	f66c41e668	res/res_pjsip_pubsub: Note that 'dialog' is also a valid event type for RLS ... In addition to specifying lists of 'presence' and 'message-summary', users can also create lists of type 'dialog'. These should be treated in the same fashion as 'presence'. Change-Id: I583bb69cd9f88b0b29bf09ddaddeac4e84189f6e	10 years ago
Rodrigo Ramírez Norambuena	eec010829a	AST_MODULE_INFO: Format corrections to the usages of AST_MODULE_INFO macro. ... Change-Id: Icf88f9f861c6b2a16e5f626ff25795218a6f2723	10 years ago
Joshua Colp	e33682cae2	res_pjsip_exten_state: Fix race condition between sending NOTIFY and termination ... The res_pjsip_exten_state module currently has a race condition between processing the extension state callback from the PBX core and processing the subscription shutdown callback from res_pjsip_pubsub. There is currently no synchronization between the two. This can present a problem as while the SIP subscription will remain valid the tree it points to may not. This is in particular a problem as a task to send a NOTIFY may get queued which will try to use the tree that may no longer be valid. This change does the following to fix this problem: 1. All access to the subscription tree is done within the task that sends the NOTIFY to ensure that no other thread is modifying or destroying the tree. This task executes on the serializer for the subscriptions. 2. A reference to the subscription serializer is kept to ensure it remains valid for the lifetime of the extension state subscription. 3. The NOTIFY task has been changed so it will no longer attempt to send a NOTIFY if the subscription has already been terminated. ASTERISK-25057 #close Reported by: Matt Jordan Change-Id: I0b3cd2fac5be8d9b3dc5e693aaa79846eeaf5643	10 years ago
Joshua Colp	bfdc766bf6	Merge "res_pjsip_pubsub: Set the endpoint on SUBSCRIBE dialogs."	10 years ago
Mark Michelson	6331be0638	res_pjsip_pubsub: Set the endpoint on SUBSCRIBE dialogs. ... When SUBSCRIBE dialogs were established, we never associated the endpoint that created the subscription with the dialog we end up creating. In most cases, this ended up not causing any problems. The actual bug that was observed was that when a device that was behind NAT established a subscription with Asterisk, Asterisk would end up sending in-dialog NOTIFY requests to the device's private IP addres instead of the public address of the NAT router. When Asterisk receives the initial SUBSCRIBE from the device, res_pjsip_nat rewrites the contact to the public address on which the SUBSCRIBE was received. This allows for the dialog to have its target address set to the proper public address. Asterisk then would send a 200 OK response to the SUBSCRIBE, then a NOTIFY with the initial subscription state. The device would then send a 200 OK response to Asterisk's NOTIFY. Here's where things went wrong. When the 200 OK arrived, res_pjsip_nat did not rewrite the address in the Contact header. Then, when the PJSIP dialog layer processed the 200 OK, PJSIP would perform a comparison between the IP address in the Contact header and its saved target address for the dialog. Since they differed, PJSIP would update the target dialog address to be the address in the Contact header. From this point, if Asterisk needed to send a NOTIFY to the device, the result was that the NOTIFY would be sent to the private address that the device placed in the Contact header. The reason why res_pjsip_nat did not rewrite the address when it received the 200 OK response was that it could not associate the incoming response with a configured endpoint. This is because on a response, the only way to associate the response to an endpoint is by finding the dialog that the response is associated with and then finding the endpoint that is associated with that dialog. We do not perform endpoint lookups on responses. res_pjsip_pubsub skipped the step of associating the endpoint with the dialog we created, so res_pjsip_nat could not find the associated endpoint and therefore couldn't rewrite the contact. This commit message is like 50x longer than the actual fix. ASTERISK 24981 #close Reported by Mark Michelson Change-Id: I2b963c58c063bae293e038406f7d044a8a5377cd	10 years ago
Scott Griepentrog	664d3263e4	res_pjsip_pubsub: On notify fail deleted sub_tree is then referenced ... This change makes the send_notify of the sub_tree not happen when the sub_tree has been deleted due to the notify call failing, which avoids a crash. ASTERISK-24970 #close Change-Id: I1f20ffc08b192f59c457293b218025a693992cbf	10 years ago
Corey Farrell	d7fc85e69d	res_pjsip: Enable unload of all modules at shutdown. ... * Move most of res_pjsip:module_unload to unload_pjsip to resolve crashes caused by running PJSIP functions from non-PJSIP threads. * Remove call to pjsip_endpt_destroy(ast_pjsip_endpoint), it was causing crashes in some cases. In theory pj_shutdown() should take care of this. * Mark res_pjsip_keepalive and res_pjsip_session as allowed to unload at shutdown. * Resolve leaked config global in res_pjsip_notify. * Unregister pubsub pjsip service module. * Implement cleanup for res_pjsip_session. ASTERISK-24731 #close Reported by: Corey Farrell Review: https://reviewboard.asterisk.org/r/4498/ ........ Merged revisions 433469 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433470 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Richard Mudgett	e2d3215b83	HTTP: Stop accepting requests on final system shutdown. ... There are three CLI commands to stop and restart Asterisk each. 1) core stop/restart now - Hangup all calls and stop or restart Asterisk. New channels are prevented while the shutdown request is pending. 2) core stop/restart gracefully - Stop or restart Asterisk when there are no calls remaining in the system. New channels are prevented while the shutdown request is pending. 3) core stop/restart when convenient - Stop or restart Asterisk when there are no calls in the system. New calls are not prevented while the shutdown request is pending. ARI has made stopping/restarting Asterisk more problematic. While a shutdown request is pending it is desirable to continue to process ARI HTTP requests for current calls. To handle the current calls while a shutdown request is pending, a new committed to shutdown phase is needed so ARI applications can deal with the calls until the system is fully committed to shutdown. * Added a new shutdown committed phase so ARI applications can deal with calls until the final committed to shutdown phase is reached. * Made refuse new HTTP requests when the system has reached the final system shutdown phase. Starting anything while the system is actively releasing resources and unloading modules is not a good thing. * Split the bridging framework shutdown to not cleanup the global bridging containers when shutting down in a hurry. This is similar to how other modules prevent crashes on rapid system shutdown. * Moved ast_begin_shutdown(), ast_cancel_shutdown(), and ast_shutting_down(). You should not have to include channel.h just to access these system functions. ASTERISK-24752 #close Reported by: Matthew Jordan Review: https://reviewboard.asterisk.org/r/4399/ ........ Merged revisions 431692 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431694 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Kevin Harwell	ca02121ef7	Investigate and fix memory leaks in Asterisk ... Fixed memory leaks that were found in Asterisk. ASTERISK-24693 #close Reported by: Kevin Harwell Review: https://reviewboard.asterisk.org/r/4347/ ........ Merged revisions 430999 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431010 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	c7ea108e02	Revert -r430452 It needs to be redone for the next major AMI version change instead. ... ASTERISK-24049 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430509 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	ef34a05f21	AMI: Remove no longer used parameter from astman_send_listack(). ... Follow-up issue to -r430435 from reviewboard review. ASTERISK-24049 Review: https://reviewboard.asterisk.org/r/4315/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430452 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	52a7cdb101	AMI: Make AMI actions that generate event lists consistent. ... * Made the following AMI actions use list API calls for consistency: Agents BridgeInfo BridgeList BridgeTechnologyList ConfbridgeLIst ConfbridgeLIstRooms CoreShowChannels DAHDIShowChannels DBGet DeviceStateList ExtensionStateList FAXSessions Hangup IAXpeerlist IAXpeers IAXregistry MeetmeList MeetmeListRooms MWIGet ParkedCalls Parkinglots PJSIPShowEndpoint PJSIPShowEndpoints PJSIPShowRegistrationsInbound PJSIPShowRegistrationsOutbound PJSIPShowResourceLists PJSIPShowSubscriptionsInbound PJSIPShowSubscriptionsOutbound PresenceStateList PRIShowSpans QueueStatus QueueSummary ShowDialPlan SIPpeers SIPpeerstatus SIPshowregistry SKINNYdevices SKINNYlines Status VoicemailUsersList * Incremented the AMI version to 2.7.0. * Changed astman_send_listack() to not use the listflag parameter and always set the value to "Start" so the start capitalization is consistent. i.e., The FAXSessions used "Start" while the rest of the system used "start". The corresponding complete event always used "Complete". * Fixed ami_show_resource_lists() "PJSIPShowResourceLists" to output the AMI ActionID for all of its list events. * Fixed off-nominal AMI protocol error in manager_bridge_info(), manager_parking_status_single_lot(), and manager_parking_status_all_lots(). Use of astman_send_error() after responding to the original AMI action request violates the action response pattern by sending two responses. * Fixed minor protocol error in action_getconfig() when no requested categories are found. Each line needs to be formatted as "Header: text". * Fixed off-nominal memory leak in manager_build_parked_call_string(). * Eliminated unnecessary use of RAII_VAR() in ami_subscription_detail(). ASTERISK-24049 #close Reported by: Jonathan Rose Review: https://reviewboard.asterisk.org/r/4315/ ........ Merged revisions 430434 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430435 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
George Joseph	8786fe13a4	res_pjsip_pubsub: Fix persistent subscriptions not surviving graceful shutdown ... If you do a 'core (shutdown|restart) graceful' persistent subscriptions won't survive. If you do a 'core (shutdown|restart) now' or asterisk terminates for some reason, they do. Here's why... When asterisk shuts down gracefully, it sends a 'NOTIFY/terminated' to subscribers for each subscription. This not only tells the subscribers that the dialog/state machine is done, it also frees the last reference to the subscription tree which causes the persistent subscription to get deleted from astdb. When asterisk restarts, nothing's left. Just preventing the delete from astdb doesn't work because we already told the subscriber to terminate the dialog so we can't restart it even if it was still in astdb. Everything works OK if asterisk terminates unexpectedly because we never send the 'terminated' message so on restart, the subscription is still in astdb and the subscriber is none the wiser. This patch suppresses the sending of 'NOTIFY/terminated' on shutdown for persistent connections. Tested-by: George Joseph Review: https://reviewboard.asterisk.org/r/4318/ ........ Merged revisions 430397 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430398 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago