https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r282895 | dvossel | 2010-08-19 16:07:20 -0500 (Thu, 19 Aug 2010) | 25 lines
Merged revisions 282894 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r282894 | dvossel | 2010-08-19 16:05:54 -0500 (Thu, 19 Aug 2010) | 18 lines
Merged revisions 282893 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r282893 | dvossel | 2010-08-19 16:03:24 -0500 (Thu, 19 Aug 2010) | 11 lines
tos_sip option was not being set correctly
When tos_sip is used, the tos of the sip socket is only set
correctly if the socket binding changes on a reload. If the binding
stays the same but the TOS changes, the new tos value would not take
into effect. This patch fixes that.
(closes issue #17712)
Reported by: nickb
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282896 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Consolidates all offhook (new call with dialtone) to setsubstate_offhook. This should be roughly equivalent to existing code, although a couple of calls now run through the full offhook sequence rather than an abbreviated one.
(closes issue #17812)
Reported by: wedhorn
Patches:
cleanup.stateoffhook.diff uploaded by wedhorn (license 30)
Tested by: salecha, wedhorn
Review: NA
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r282671 | rmudgett | 2010-08-18 10:27:51 -0500 (Wed, 18 Aug 2010) | 1 line
Use the correct operator when calculating the PRI span devstate.
........
r282672 | rmudgett | 2010-08-18 10:28:27 -0500 (Wed, 18 Aug 2010) | 1 line
Use the correct type for aoce_delayhangup bit field.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282673 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r282639 | mnicholson | 2010-08-18 08:10:39 -0500 (Wed, 18 Aug 2010) | 13 lines
Properly handle 200 and unknown responses conatined in NOTIFY requests received in response to REFER requests.
This patch fixes the way asterisk handles NOTIFY requests received in response to REFER requests. These changes to NOTIFY handler were first introduced in r217482. This new change properly handles the 200 response by queueing an AST_TRANSFER_SUCCESS control frame and also prevents that control frame from being queued when provisional and unknown responses are received.
(issue #17486)
Reported by: davidw
Tested by: mnicholson
(issue #12713)
Reported by: davidw
Review: https://reviewboard.asterisk.org/r/860/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r282334 | rmudgett | 2010-08-13 18:53:36 -0500 (Fri, 13 Aug 2010) | 6 lines
PRI CCSS may use a stale dial string for the recall dial string.
If an outgoing call negotiates a different B channel than initially
requested, the saved original dial string was not transferred to the new B
channel. CCSS uses that dial string to generate the recall dial string.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282335 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r282236 | dvossel | 2010-08-13 13:58:10 -0500 (Fri, 13 Aug 2010) | 23 lines
Merged revisions 282235 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r282235 | dvossel | 2010-08-13 13:54:53 -0500 (Fri, 13 Aug 2010) | 16 lines
only do magic pickup when notifycid is enabled
A new way of doing BLF pickup was introduced into 1.6.2. This feature
adds a call-id value into the XML of a SIP_NOTIFY message sent to alert
a subscriber that a device is ringing. This option should only be enabled
when the new 'notifycid' option is set... but this was not the case. Instead
the call-id value was included for every RINGING Notify message, which
caused a regression for people who used other methods for call pickup.
(closes issue #17633)
Reported by: urosh
Patches:
chan_sip.txt uploaded by urosh (license )
blf_cid_issue.diff uploaded by dvossel (license 671)
Tested by: dvossel, urosh, okrief, alecdavis
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282237 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r281432 | dvossel | 2010-08-09 15:47:53 -0500 (Mon, 09 Aug 2010) | 20 lines
Merged revisions 281430 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r281430 | dvossel | 2010-08-09 15:46:50 -0500 (Mon, 09 Aug 2010) | 13 lines
fixes SIP peers memory leak
We zeroed out the peer's addr before it was removed from the
peers_by_ip container. This made it impossible to be removed
from the container as the addr is the key used by the container
to find the peer.
(closes issue #17774)
Reported by: kkm
Patches:
017774-sip-peer-leak-1.6.2.10.diff uploaded by kkm (license 888)
017774-sip-peer-leak-1.8.diff uploaded by kkm (license 888)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@281433 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r281429 | jpeeler | 2010-08-09 15:43:54 -0500 (Mon, 09 Aug 2010) | 27 lines
Merged revisions 281391 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r281391 | jpeeler | 2010-08-09 15:07:29 -0500 (Mon, 09 Aug 2010) | 20 lines
Merged revisions 281390 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r281390 | jpeeler | 2010-08-09 15:04:30 -0500 (Mon, 09 Aug 2010) | 13 lines
Prevent loss of Caller ID information set on local channel after masquerade.
Caller ID set on the channel before a masquerade occurs when using a local
channel would cause the information to be lost. The problem was that the
information was set on a channel destined to be hung up. The somewhat confusing
fix is to detect if any Caller ID has been set on the channel and if so
preswap the Caller ID data so that basically the masquerade puts the data back.
(closes issue #17138)
Reported by: kobaz
Review: https://reviewboard.asterisk.org/r/847/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@281431 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Cleaned up handling of onhook indications and added indications if more than one sub on device. Also fixes issue in 12324 so that the phone can call itself without locking up.
(closes issue #17692)
Reported by: jmhunter
Patches:
chan_skinny-transfer-v4.txt uploaded by DEA (license 3)
skinnytransfver.v8.diff uploaded by wedhorn (license 30)
Tested by: jmhunter, salecha, wedhorn
Review: NA
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@281257 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move call answering stuff into new setsubstate_connected. Also add sub->substate var and set it to SUBSTATE_CONNECTED in setsubstate_connected.
(closes issue #17772)
Reported by: wedhorn
Patches:
cleanup.stateconnected2.diff uploaded by wedhorn (license 30)
Tested by: wedhorn, salecha
Review: NA
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@281227 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Moved inline packet sending to transmit_ subs. Removed handle_keep_alive and handle_register_message to inline in handle_message. Also moved transmit_response(d) to transmit_response_bysessions(s) and created a wrapper transmit_response(d) that calls transmit_response_bysession(d->session).
(closes issue #16980)
Reported by: wedhorn
Patches:
skinny-clean06b.diff uploaded by wedhorn (license 30)
Tested by: wedhorn, DEA
Review: NA
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@280589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r280307 | mnicholson | 2010-07-29 08:56:35 -0500 (Thu, 29 Jul 2010) | 11 lines
Merged revisions 280306 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r280306 | mnicholson | 2010-07-29 08:45:11 -0500 (Thu, 29 Jul 2010) | 2 lines
Implement support for ast_channel_queryoption on local channels. Currently only AST_OPTION_T38_STATE is supported.
ABE-2229
Review: https://reviewboard.asterisk.org/r/813/
........
Additionally, pass AST_CONTROL_T38_PARAMETERS control frames through generic bridges. This change appears to have been unintentionally left out of rev 203699.
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@280308 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r279916 | russell | 2010-07-27 14:50:56 -0500 (Tue, 27 Jul 2010) | 12 lines
Fix inband DTMF detection on outgoing ISDN calls.
This is a regression from the sig_pri split from chan_dahdi. When a call is
first initiated, the inband DTMF detector is not enabled if it's an outgoing
ISDN call. However, it needs to be turned on once the media path starts up.
This handling was put back in the open_media() callback of chan_dahdi. In
sig_pri, open_media() calls were added to a few places where it was needed,
including handling of PRI_EVENT_RINGING, PRI_EVENT_PROGRESS, and
PRI_EVENT_PROCEEDING.
Thanks to rmudgett for helping me with the patch!
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@279917 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r279887 | mmichelson | 2010-07-27 13:54:07 -0500 (Tue, 27 Jul 2010) | 16 lines
Fix parsing error in sip_sipredirect().
The code was written in a way that did a bad job of
parsing the port out of a URI. Specifically, it would
do badly when dealing with an IPv6 address. In this
particular scenario, there was no value from parsing
the port out, so I just removed that logic. And while
I was messing around in the function, I changed some
variable names to be more descriptive.
(closes issue #17661)
Reported by: oej
Patches:
17661.diff uploaded by mmichelson (license 60)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@279888 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r279785 | mmichelson | 2010-07-27 10:15:22 -0500 (Tue, 27 Jul 2010) | 20 lines
Merged revisions 279784 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r279784 | mmichelson | 2010-07-27 10:13:24 -0500 (Tue, 27 Jul 2010) | 14 lines
Fix bad behavior of dynamic_exclude_static option in sip.conf.
We were attempting to create a contactdeny rule based on the peer's
IP address before the peer's IP address had been set. By moving the
processing further down in the function, we can ensure stuff works
as we expect for it to.
(closes issue #17717)
Reported by: mmichelson
Patches:
17717.patch uploaded by mmichelson (license 60)
Tested by: DennisD
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@279786 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r279568 | dvossel | 2010-07-26 14:59:03 -0500 (Mon, 26 Jul 2010) | 21 lines
transaction matching using top most Via header
This patch modifies the way chan_sip.c does transaction to dialog
matching. Asterisk now stores information in the top most Via header
of the initial incoming request and compares that against other Requests
that have the same call-id. This results in Asterisk being able to
detect a forked call in which it has received multiple legs of the
fork. I completely stripped out the previous matching code and made
the comparisons a little more explicit and easier to understand. My
comments in the code should offer all the details involving this patch.
This patch also fixes a bug with the usage of the OBJ-MULTIPLE flag to
find multiple dialogs with the same call-id. Since the callback
function was returning (CMP_MATCH | CMP_STOP) only the first item
found was being returned. I fixed this by making a new callback
function for finding multiple dialogs that only returns (CMP_MATCH)
on a match allowing for multiple items to be returned.
Review: https://reviewboard.asterisk.org/r/776/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@279569 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r279504 | mmichelson | 2010-07-26 11:04:09 -0500 (Mon, 26 Jul 2010) | 14 lines
Allow for systems without locale support to be usable.
A recent change to SIP URI comparison code added a locale-specific
string comparison to the mix, and certain systems do not support
such functions. This fix allows for those systems to still use
Asterisk 1.8
(closes issue #17697)
Reported by: pprindeville
Patches:
asterisk-trunk-bugid17697.patch uploaded by pprindeville (license 347)
Tested by: mmichelson
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@279533 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The "dahdi show channels" extension column previously only showed the
called number of an incoming call. It now shows the called number for an
outgoing call as well.
(closes issue #17653)
Reported by: amazinzay
Patches:
issue17653_trunk.txt uploaded by rmudgett (license 664)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@279156 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This initially was created to work around the issue of
using a string comparison instead of a binary comparison
for IP addresses. It evolved a bit when test cases were
created and it was discovered that comparison of URI
parameters was not working exactly as it should.
sip_uri_cmp() and its helpers have been moved to reqresp_parser.c
and a new test has been added.
(closes issue #17662)
Reported by: oej
Review: https://reviewboard.asterisk.org/r/792
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278980 65c4cc65-6c06-0410-ace0-fbb531ad65f3
FXS lines normally connect to a telephone. However, when FXS lines are routed
to an external PBX or Key System to act as "external" or "CO" lines, it is
extremely difficult, if not impossible for the external PBX to know when
the call has been disconnected without receiving a polarity reversal on the line.
Now using answeronpolarityswitch and hanguponpolarityswitch keywords that
previously were used only for FXO ports, now applies like functionality for
an FXS port, but from the connected equipment's point of view.
(closes issue #17318)
Reported by: armeniki
Patches:
fxs_linepolarity.diff5.txt uploaded by alecdavis (license 585)
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/797/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The "dahdi show channels" CLI command still reports the DNID of the
previous call even if the call is already hang up. The "dahdi show
channels" command of older releases clear the DNID once the channel is
hang up.
Regression from the sig_analog/sig_pri extraction from chan_dahdi.
(closes issue #17623)
Reported by: klaus3000
Patches:
issue17623.patch uploaded by rmudgett (license 664)
Tested by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278777 65c4cc65-6c06-0410-ace0-fbb531ad65f3
[RFC3265]3.1.6.1....
The notifier MAY also check that the duration in the "Expires" header
is not too small. If and only if the expiration interval is greater
than zero AND smaller than one hour AND less than a notifier-
configured minimum, the notifier MAY return a "423 Interval too
small" error which contains a "Min-Expires" header field. The "Min-
Expires" header field is described in SIP [1].
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278536 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes some cases of no outgoing calls on FXO before an incoming call.
Remove an unnecessary testing of an "off-hook" bit from DAHDI for FXO
(KS/GS) channels.In some cases the bit would not be initialized properly
before the first inbound call and thus prevent an outgoing call.
If those tests are actually required by anybody, they should define
DAHDI_CHECK_HOOKSTATE in channels/sig_analog.c .
(closes issue #14577)
Reported by: jkroon
Patches:
asterisk_chan_dahdi_hookstate_fix_trunk_new.diff uploaded by frawd (license 610)
Tested by: frawd
Review: https://reviewboard.asterisk.org/r/699/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278501 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If Asterisk sends a 4xx error and the other side sends a CANCEl
before receiving the 4xx and responding with the ACK, Asterisk
will process the CANCEL and send a 487 Request Terminated as
a new final response to the INVITE. Since we are issuing a new
final response to the INVITE, the old one must be pretend_acked
else it will keep retransmitting.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278234 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are two changes here:
1. Since the externip setting can now have a port attached
to it, calling it "externip" is misleading. The option is now
documented and parsed as "externaddr." This also extends to the
"matchexterniplocally" setting. It is now documented and parsed
as "matchexternaddrlocally." The old names for the options may
still be used, but they are no longer used in the sip.conf.sample
file.
2. If no port is set for the externaddr, and UDP is the transport
to be used, then we will set the port of the externaddr to that of
the udpbindaddr. This was how things worked prior to the IPv6 merge,
so this is a regression fix.
(closes issue #17665)
Reported by: mmichelson
Patches:
17665.diff#2 uploaded by pprindeville (license 347)
Tested by: pprindeville
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277873 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The issue here is that passing an array to a function prohibits the ARRAY_LEN
macro from returning the real size. To avoid this the size is now defined and
use of ARRAY_LEN is avoided.
(closes issue #15718)
Reported by: alecdavis
Patches:
bug15718.patch uploaded by jpeeler (license 325)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277837 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ACLs can now be configured to match IPv6 networks. This is only
relevant for ACLs in chan_sip for now since other channel drivers
do not support IPv6 addressing. However, once those channel drivers
are outfitted to support IPv6 addressing, the ACLs will already be
ready for IPv6 support.
https://reviewboard.asterisk.org/r/791
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277814 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277497 | mnicholson | 2010-07-16 16:18:38 -0500 (Fri, 16 Jul 2010) | 4 lines
Default to no udptl error correction so that error correction will be disabled in the event that the remote end indicates that they do not support the error correction mode we requested.
FAX-128
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277530 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277419 | rmudgett | 2010-07-16 15:18:54 -0500 (Fri, 16 Jul 2010) | 15 lines
priexclusive in chan_dahdi.conf ignored when reloading dahdi module
During a reload, the priexclusive and outsignalling parameters are not
read in from the config file as intended. Unfortunately, they get set to
defaults as a result. This patch makes sure that they do not get set to
defaults during a reload.
(closes issue #17441)
Reported by: mtryfoss
Patches:
issue17441_v1.4.patch uploaded by rmudgett (license 664)
issue17441_v1.6.2.patch uploaded by rmudgett (license 664)
issue17441_trunk.patch uploaded by rmudgett (license 664)
Tested by: rmudgett
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277467 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Found a unused bag of curly brackets under my table. I always wondered where
they had gone. They where indeed needed in chan_sip.c
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276989 65c4cc65-6c06-0410-ace0-fbb531ad65f3
sip.conf configuration for the channel and for devices.
The Max-Forwards header is used to prevent loops in a SIP network. Each intermediary,
like SIP proxys and SBCs, decrement this counter and detects when it reaches zero,
at which point the SIP request is nicely killed in a SIP-friendly way.
Review: https://reviewboard.asterisk.org/r/778/
Thanks to dvossel for the review and good advice.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Related to changes from 276571, I was accidentally testing with a port set in
my configuration causing me to miss this. Also moved the TCP handling as well
to occur before build_peer is called.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276788 65c4cc65-6c06-0410-ace0-fbb531ad65f3
MWI updates were not being sent if no messages were found in the event cache.
This was corrected since a phone may need to clear its MWI status configured
previously from another mailbox.
Upon module or sip reload, MWI updates could not be sent due to the sipsock
socket not being set early enough in reload_config. The code handling the
descriptor assignment and such has simply been moved before the call to
build_peer.
Issuing a sip reload cleared the IP address of the peer, but skipped checking
the database for registration information. The database is now checked both
for sip reload and actually reloading the module.
If a transmission occurs before the do_monitor thread has started, do not
attempt to send a signal to it.
(closes issue #17398)
Reported by: ip-rob
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276571 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_sockaddr_stringiy_fmt (which is call by all ast_sockaddr_stringify* functions)
uses thread-local storage for storing the string that it creates. In cases where
ast_sockaddr_stringify_fmt was being called twice within the same statement, the
result of one call would be overwritten by the result of the other call. This
usually was happening in printf-like statements and was resulting in the same
stringified addressed being printed twice instead of two separate addresses.
I have fixed this by using ast_strdupa on the result of stringify functions if
they are used twice within the same statement. As far as I could tell, there were
no instances where a pointer to the result of such a call were saved anywhere, so
this is the only situation I could see where this error could occur.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276570 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Unlike most responses, the 200 Ok to a pending INVITE Request is
acknowledged by an ACK Request. If the ACK Request for this Response is not received
the previous behavior was to immediately destroy the dialog and hangup
the channel. Now in an effort to be more RFC compliant, instead of immediately
destroying the dialog during this special case, termination is done with a BYE Request
as the dialog is technically confirmed when the 200 Ok is sent even if the ACK is
never received. The behavior of immediately hanging up the channel remains.
This only affects how dialog termination proceeds for this one special case.
RFC 3261 section 13.3.1.4
"If the server retransmits the 2xx response for 64*T1 seconds without receiving
an ACK, the dialog is confirmed, but the session SHOULD be terminated. This is
accomplished with a BYE, as described in Section 15."
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276439 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The purpose of this patch is to eliminate struct ast_callerid since it has
turned into a miscellaneous collection of various party information.
Eliminate struct ast_callerid and replace it with the following struct
organization:
struct ast_party_name {
char *str;
int char_set;
int presentation;
unsigned char valid;
};
struct ast_party_number {
char *str;
int plan;
int presentation;
unsigned char valid;
};
struct ast_party_subaddress {
char *str;
int type;
unsigned char odd_even_indicator;
unsigned char valid;
};
struct ast_party_id {
struct ast_party_name name;
struct ast_party_number number;
struct ast_party_subaddress subaddress;
char *tag;
};
struct ast_party_dialed {
struct {
char *str;
int plan;
} number;
struct ast_party_subaddress subaddress;
int transit_network_select;
};
struct ast_party_caller {
struct ast_party_id id;
char *ani;
int ani2;
};
The new organization adds some new information as well.
* The party name and number now have their own presentation value that can
be manipulated independently. ISDN supplies the presentation value for
the name and number at different times with the possibility that they
could be different.
* The party name and number now have a valid flag. Before this change the
name or number string could be empty if the presentation were restricted.
Most channel drivers assume that the name or number is then simply not
available instead of indicating that the name or number was restricted.
* The party name now has a character set value. SIP and Q.SIG have the
ability to indicate what character set a name string is using so it could
be presented properly.
* The dialed party now has a numbering plan value that could be useful to
have available.
The various channel drivers will need to be updated to support the new
core features as needed. They have simply been converted to supply
current functionality at this time.
The following items of note were either corrected or enhanced:
* The CONNECTEDLINE() and REDIRECTING() dialplan functions were
consolidated into func_callerid.c to share party id handling code.
* CALLERPRES() is now deprecated because the name and number have their
own presentation values.
* Fixed app_alarmreceiver.c write_metadata(). The workstring[] could
contain garbage. It also can only contain the caller id number so using
ast_callerid_parse() on it is silly. There was also a typo in the
CALLERNAME if test.
* Fixed app_rpt.c using ast_callerid_parse() on the channel's caller id
number string. ast_callerid_parse() alters the given buffer which in this
case is the channel's caller id number string. Then using
ast_shrink_phone_number() could alter it even more.
* Fixed caller ID name and number memory leak in chan_usbradio.c.
* Fixed uninitialized char arrays cid_num[] and cid_name[] in
sig_analog.c.
* Protected access to a caller channel with lock in chan_sip.c.
* Clarified intent of code in app_meetme.c sla_ring_station() and
dial_trunk(). Also made save all caller ID data instead of just the name
and number strings.
* Simplified cdr.c set_one_cid(). It hand coded the ast_callerid_merge()
function.
* Corrected some weirdness with app_privacy.c's use of caller
presentation.
Review: https://reviewboard.asterisk.org/r/702/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Retransmission of packets should not be based on how many packets were
sent, but instead on a timeout period. Depending on whether or not the
packet is for a INVITE or NON-INVITE transaction, the number of packets
sent during the retransmission timeout period will be different, so
timing out based on the number of packets sent is not accurate.
This patch fixes this by removing the retransmit limit and only stopping
retransmission after a timeout period is reached. By default this
timeout period is 64*(Timer T1) for both INVITE and non-INVITE
transactions. For more information on sip timer values refer to
RFC3261 Appendix A.
Review: https://reviewboard.asterisk.org/r/749/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276219 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some code improperly assumes that the sessions are still there, so revert the
change until I can find all of them and fix them.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276206 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since we are only keeping the dialog around for retransmissions at this point
and there is no possibility that we are still handling RTP, go ahead and
destroy the RTP sessions. Keeping them alive for 32 past when they are used
is unnecessary and can lead to problems with having too many open file
descriptors, etc.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@275998 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It was essentially an off-by-one error. The easiest way
to fix this was to use the handy-dandy AST_NONSTANDARD_RAW_ARGS
macro to parse the pieces of the registration string out. Tested
and it works wonderfully.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@275385 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a Via header contained an IPv6 address, we would not properly parse
the port. We would instead get the information after the first colon in
the address.
(closes issue #17614)
Reported by: oej
Patches:
diff uploaded by sperreault (license 252)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@275308 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This should fix all the CDR tests that were not passing. When they would
originate a call, all fields in the INVITE that contained the source port would
have the port set to 0. Most troubling of these was the Contact header. Tests
are passing locally now and should also pass on the bamboo build agents.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@275294 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Part of the change with the IPv6 changes is to treat a host:port as
a single 'domain' entity. This test was not updated to have the correct
expectation after calling parse_uri().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274984 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a generic API for accommodating IPv6 and IPv4 addresses
within Asterisk. While many files have been updated to make use of the
API, chan_sip and the RTP code are the files which actually support
IPv6 addresses at the time of this commit. The way has been paved for
easier upgrading for other files in the near future, though.
Big thanks go to Simon Perrault, Marc Blanchet, and Jean-Philippe Dionne
for their hard work on this.
(closes issue #17565)
Reported by: russell
Patches:
asteriskv6-test-report.pdf uploaded by russell (license 2)
Review: https://reviewboard.asterisk.org/r/743
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r274280 | twilson | 2010-07-06 17:08:20 -0500 (Tue, 06 Jul 2010) | 9 lines
Add option to not do a call forward on 482 Loop Detected
Asterisk has always set up a forwarded call when receiving a 482 Loop Detected.
This prevents handling the call failure by just continuing on in the dialplan.
Since this would be a change in behavior, the new option to disable this
behavior is forwardloopdetected which defaults to 'yes'.
Review: https://reviewboard.asterisk.org/r/764/
........
(no option for trunk, just changing the behavior)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274284 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A failure when calling the get_destination can mean multiple things. If
the extension is not found, a 404 error is appropriate, but if the URI
scheme is incorrect, a 404 is not approperiate. This patch adds the
get_destination_result enum to differentiate between these and other failure
types. The only logical difference in this patch is that we now send a "416
Unsupported URI scheme" response instead of a "404" when the scheme is not
recognized. This indicates to the initiator of the INVITE to retry the request
with a correct URI.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@273427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r273060 | tilghman | 2010-06-29 18:15:28 -0500 (Tue, 29 Jun 2010) | 10 lines
Allow the "useragent" value to be restored into memory from the realtime backend.
This value is purely informational. It does not alter configuration at all.
(closes issue #16029)
Reported by: Guggemand
Patches:
realtime-useragent.patch uploaded by Guggemand (license 897)
Tested by: Guggemand
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@273078 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC 2361 section 24.4.1 send a 400 Bad Request if the request
can not be understood due to malformed syntax. Currently we
simply ignore a packet with a missing callid, to, from, or
via header. Instead of ignoring we now send the 400 Bad request.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272981 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC 3261 section 8.2.2.3 states that if any unsupported options
are found in the Require header field, a "420 (Bad Extension)"
response should be sent with an Unsupported header field containing
only the unsupported options.
This is not currently being done correctly. Right now, if Asterisk
detects any unsupported sip options in a Require header the entire
list of options are returned in the Unsupported header even if some
of those options are in fact supported. This patch fixes that by
building an unsupported options character buffer when parsing the
options that can be sent with the 420 response. A unit test verifying
this functionality has been created. Some code refactoring was required.
Review: https://reviewboard.asterisk.org/r/680/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272880 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I am doing work in this function. I noticed a large number of
coding guidline fixes that needed to be made. Rather than have
those changes distract from my functional changes I decided
to separate these into a separate patch.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272652 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC3261 states that Timer A should start at 500ms (T1) by default.
In chan_sip this value initially started at 1000ms and I changed
it to 500ms recently. After doing that I noticed in my packet
captures that it still occasionally retransmitted starting at
1000ms instead of 500ms like I told it to. This occurs because
the scheduler runs in the do_monitor thread. If a new retransmission
is added while the do_monitor thread is sleeping then it may not
detect that retransmission for nearly 1000ms. To fix this I just
poke the do_monitor thread to wake up when a new packet is sent
reliably requiring retransmits. The thread then detects the new
scheduler entry and adjusts its sleep time to account for it.
Review: https://reviewboard.asterisk.org/r/747
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The external test suite stops Asterisk using the "core stop gracefully" command.
The logs from the tests show that there are a number of problems with Asterisk
trying to cleanly shut down. This patch addresses the following type of error
that comes from chan_iax2:
[Jun 22 16:58:11] ERROR[29884]: lock.c:129 __ast_pthread_mutex_destroy:
chan_iax2.c line 11371 (iax2_process_thread_cleanup):
Error destroying mutex &thread->lock: Device or resource busy
For an example in the context of a build, see:
http://bamboo.asterisk.org/browse/AST-TRUNK-739/log
The primary purpose of this patch is to change the thread pool shutdown
procedure to be more explicit to ensure that the thread exits from a point
where it is not holding a lock. While testing that, I encountered various
crashes due to the order of operations in unload_module() being problematic.
I reordered some things there, as well.
Review: https://reviewboard.asterisk.org/r/736/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272370 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Testing proved that if Asterisk sent a connected line reinvite, and
the endpoint to which the reinvite were being sent sent a reinvite, Asterisk
would not properly respond with a 491 response.
The reason is that on connected line reinvites, we set the dialog's invitestate
to INV_CALLING to prevent Asterisk from sending a rapid flurry of connected line
reinvites. For other reinvites we do not do this. Because of the current invitestate,
when Asterisk received the reinvite, we interpreted this as a spiraled INVITE, and thus
did not behave properly.
The fix for this is to not enter the loop detection or spiral logic in handle_request_invite
if the channel state is currently up. This way, no mid-call reinvites will be misinterpreted,
no matter what the nature of the reinvite may have been.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272090 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This small changes prevents destroy_all_channels() from accessing a lock on an
unused dahdi_pri struct, resolving a ton of ERRORs that get spewed out when
shutting Asterisk down gracefully.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272052 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC 3261 section 9 states that a CANCEL has no effect on a
request to a UAS that has already given a final response. This
patch checks to make sure there is a pending invite before
allowing a CANCEL request to be processed, otherwise it responds
to the CANCEL with a "481 Call/Transaction Does Not Exist".
Review: https://reviewboard.asterisk.org/r/697/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271977 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r271689 | mnicholson | 2010-06-22 07:52:27 -0500 (Tue, 22 Jun 2010) | 8 lines
Modify chan_sip's packet generation api to automatically calculate the Content-Length. This is done by storing packet content in a buffer until it is actually time to send the packet, at which time the size of the packet is calculated. This change was made to ensure that the Content-Length is always correct.
(closes issue #17326)
Reported by: kenner
Tested by: mnicholson, kenner
Review: https://reviewboard.asterisk.org/r/693/
........
This change also adds an ast_str_copy_string() function (similar to ast_copy_string), that copies one ast_str into another, properly handling embedded nulls.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271690 65c4cc65-6c06-0410-ace0-fbb531ad65f3
According to RFC 3261 section 17.2.2, which describes non-INVITE server
transaction, when a dialog enters the Completed state it must destroy
the dialog after Timer J (T1*64) fires. For a BYE transaction Asterisk
terminates the dialog immediately during sip_hangup() when it should be
waiting T1*64 ms. This results in some odd behavior. For instance if
Asterisk receives a BYE and transmits a 200ok in response, if the endpoint
never receives the 200ok it will retransmit the BYE to which Asterisk
responds with a "481 Call leg/transaction does not exist" because the
dialog is already gone.
To resolve this I made a function called sip_scheddestroy_final(). This
differs slightly from sip_schedestroy() in that it enables a flag that
will prevent the destruction from ever being rescheduled or canceled
afterwards. It also prevents the pvt's needdestroy flag from being set
which triggers the destruction of the dialog within the do_monitor thread().
By using this function we are guaranteed destruction will not occur
until the scheduled time. This allows Asterisk to respond to any possible
retransmits for a dialog after we process the initial BYE request for T1*64 ms.
Other changes: I removed two instances where sip_cancel_destroy is used
right before calling sip_scheddestroy. sip_scheddestroy always calls
sip_cancel_destroy before scheduling the new destruction so it is completely
unnecessary.
Review: https://reviewboard.asterisk.org/r/694/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271262 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r270866 | dvossel | 2010-06-16 12:35:29 -0500 (Wed, 16 Jun 2010) | 22 lines
fixes chan_iax2 race condition
There is code in chan_iax2.c that attempts to guarantee that only a single
active thread will handle a call number at a time. This code works once
the thread is added to an active_list of threads, but we are not currently
guaranteed that a newly activated thread will enter the active_list immediately
because it is left up to the thread to add itself after frames have been
queued to it. This means that if two frames come in for the same call number
at the same time, it is possible for them to grab two separate threads because
the first thread did not add itself to the active_list fast enough. This
causes some pretty complex problems.
This patch resolves this race condition by immediately adding an activated
thread to the active_list within the network thread and only depending on
the thread to remove itself once it is done processing the frames queued to
it. By doing this we are guaranteed that if another frame for the same call
number comes in at the same time, that this thread will immediately be found
in the active_list of threads.
Review: https://reviewboard.asterisk.org/r/720/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@270867 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Clearing the callwaitcas flag in analog_call was causing the incoming D digit
to be ignored which triggers sending the caller ID.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@270836 65c4cc65-6c06-0410-ace0-fbb531ad65f3
chan_sip's "contactdeny" feature screens the "to be registered contact".
In case of nat=yes it should not use the address information from the
Contact header (which is not used at all for routing), but the source
IP address of the request.
Thus, if nat=yes and a client sends a request from a denied IP address
(e.g. by spoofing the src-IP address) it can bypass the screening.
This commit makes contactdeny apply to the src ip when nat=yes instead.
(closes issue #17276)
Reported by: klaus3000
Patches:
patch-asterisk-trunk-contactdeny.txt uploaded by klaus3000 (license 65)
Tested by: klaus3000
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@270658 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The "channel" option would chop the channel name at the last '-', which made
it useless for something like a channel transfer from the dialplan. The
"fullchannel" option will return the channel name as-is.
ABE-2218
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@270260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
David Vossel
Matthew Nicholson
Damien Wedhorn
Richard Mudgett
Tilghman Lesher
Tzafrir Cohen
Russell Bryant
Jeff Peeler
Paul Belanger
Sean Bright
Olle Johansson
Mark Michelson
Alec L Davis
Terry Wilson
Eliel C. Sardanons
Tim Ringenbach
Jason Parker