According to the man page for stdarg(3),
"Each invocation of va_copy() must be matched by a
corresponding invocation of va_end() in the same
function."
There were several cases in __ast_str_helper where
va_copy was not matched with a corresponding call
to va_end.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247076 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When using ast_seekstream with the read/write streams of a monitor,
the number of samples we are seeking must be of the same rate as the
stream or the jump calculation will be incorrect. This patch adds logic
to correctly convert the number of samples to jump to the sample rate
the read/write stream is using.
For example, if the call is G722 (16khz) and the read/write stream is
recording a 8khz wav, seeking 320 samples of 16khz audio is not the
same as seeking 320 samples of 8khz audio when performing the ast_seekstream
on the stream.
ABE-2044
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246899 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change builds upon the recent change to menuselect to add 'touch_on_change'
as an attribute of both categories and members. This should allow only the most
invasive defines to cause a complete rebuild, while defines which only affect a
subset of modules will only cause a rebuild of that smaller set.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246789 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r246545 | dvossel | 2010-02-12 17:30:17 -0600 (Fri, 12 Feb 2010) | 16 lines
lock channel during datastore removal
On channel destruction the channel's datastores are removed and
destroyed. Since there are public API calls to find and remove
datastores on a channel, a lock should be held whenever datastores are
removed and destroyed. This resolves a crash caused by a race
condition in app_chanspy.c.
(closes issue #16678)
Reported by: tim_ringenbach
Patches:
datastore_destroy_race.diff uploaded by tim ringenbach (license 540)
Tested by: dvossel
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This module includes a single test so far that creates events using two
different methods and does some verification on the result to make sure
the correct data can be retrieved from the event that was created.
One bug was found in the event API while developing this test, which makes
me happy. :-)
Review: https://reviewboard.asterisk.org/r/495/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
They were previously passed correctly, but they simply weren't used. This
caused issues with various platforms whose builds needed to pass special
linker flags via the configure script.
(closes issue #16596)
Reported by: pprindeville
Patches:
asterisk-1.6-astldflags.patch uploaded by pprindeville (license 347)
Tested by: tilghman
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245578 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ao2_iterator_destroy was not being used on the
iterator during the test. This resulted in the
container never actually being destroyed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@244887 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When using the 'test show registered' cli command the 'Test Results'
category was truncating the last few characters making it look like
'Test Resul'. I also expanded other parts of the format to better
represent how long function names and categories will likely be.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@244688 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The options are: parkedcallparking, parkedcallhangup, parkedcallrecording, and
parkedcalltransfers. Previously these options were only available for the
default parking lot.
(closes issue #16641)
Reported by: bluecrow76
Patches:
asterisk-1.6.2.1-features.c.diff uploaded by bluecrow76 (license 270)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@244598 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When potentially sending manager events, return immediately if there are no
sessions or hooks. Also, avoid locking the hooks list if it is empty.
(issue #16455)
Reported by: atis
Patches:
manager_hooks_trunk.patch uploaded by atis (license 242)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243986 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ast_frdup the frame data union does not get set to point to malloced memory
if the datalen is zero, so make sure to handle the same case in ast_frisolate
appropriately.
(closes issue #16058)
Reported by: atis
Patches:
bug16058-fix.patch uploaded by jpeeler (license 325)
Tested by: atis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243244 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to improve readability, the output from 'test show
registered' has been modified to truncate fields to fit within
the format output if they are over a certain length.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243242 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch removes code that was duplicated from pbx.c to manager.c
in order to prevent API change in released versions of Asterisk.
There are propably also other places that would benefit from reading the
return code and react if a function returns error codes on writing a value into it.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@242919 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When this code was developed, we came up with our own XML format for the test
output. I have since started looking at integration with other tools, namely
continuous integration frameworks, and this format seems to be supported
across a number of applications. With these changes in place, I was able
to get Atlassian Bamboo to interpret the test results.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241855 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Allows CDR variables added in cdr.c:set_one_cid to become visable during the call,
by executing ast_cdr_update() early in __ast_pbx run.
Reverts sig_pri changes in trunk that are specific to isdn technology only.
(closes issue #16638)
Reported by: alecdavis
Patches:
cdr_update.diff3.txt uploaded by alecdavis (license 585)
Tested by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241416 65c4cc65-6c06-0410-ace0-fbb531ad65f3
passdata was only being set in pbx_substitue_variables when arguments were
passed.
(closes issue #16406)
(closes issue #16586)
Reported by: DLNoah
Patches:
bug16586v2.patch uploaded by jpeeler (license 325)
Tested by: DLNoah
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241366 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the limit was set past MAX_INT upon answering, the call was immediately
hung up due to overflow from the return of ast_tvdiff_ms (in ast_check_hangup).
The time calculation functions ast_tvdiff_sec and ast_tvdiff_ms have been
changed to return an int64_t to prevent overflow. Also the reporter suggested
adding a message indicating the reason for the call hanging up. Given that the
new limit is so much higher, the message (which would only really be useful in
the overflow scenario) has been made a debug message only.
(closes issue #16006)
Reported by: viraptor
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241143 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r241015 | seanbright | 2010-01-18 14:54:19 -0500 (Mon, 18 Jan 2010) | 12 lines
Plug a memory leak when reading configs with their comments.
While reading through configuration files with the intent of returning their
full contents (comments specifically) we allocated some memory and then forgot
to free it. This doesn't fix 16554 but clears up a leak I had in the lab.
(issue #16554)
Reported by: mav3rick
Patches:
issue16554_20100118.patch uploaded by seanbright (license 71)
Tested by: seanbright
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241016 65c4cc65-6c06-0410-ace0-fbb531ad65f3
We're revisiting the previous patch, albeit with a method that overcomes the
prior criticism that it was not POSIX-compliant.
(closes issue #16602)
Reported by: frawd
Patches:
20100114__issue16602.diff.txt uploaded by tilghman (license 14)
Tested by: frawd
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@240499 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk would crash on startup if MALLOC_DEBUG were set in menuselect. This is because
the manager action UpdateConfig had to resize its string field allocation to set the
description. When the resize occurred, ast_copy_string would crash because we were
attempting to copy a string from a NULL pointer. Setting the strings initially makes
the code much less crashy.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@240420 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The problem was the OUTGOING flag was not getting set properly on the channel,
resulting in pickup failing as ast_read thought the call was inbound. Refer to
170393 for a more verbose description as this is the same exact change.
(closes issue #16539)
Reported by: syspert
Patches:
bug16539.patch uploaded by jpeeler (license 325)
Tested by: syspert
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@240179 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Specifically, by setting TESTTIME() to a particular date and time, you
can test whether a dialplan correctly branches as was intended. This was
developed after recent questions on the -users list on how to test their
holiday dialplan logic.
(closes issue #16464)
Reported by: tilghman
Patches:
20100112__issue16464.diff.txt uploaded by tilghman (license 14)
Review: https://reviewboard.asterisk.org/r/458/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239957 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r239838 | jpeeler | 2010-01-13 13:43:33 -0600 (Wed, 13 Jan 2010) | 11 lines
Fix regression for timed out parked call returning to caller
This issue seems to have been exposed by the fix in 160390 whereby using a
masquerade prevented a crash. The new channel used in the masquerade was
not copying the macro information from the old channel.
(closes issue #15459)
Reported by: djrodman
Patches:
patch_15459.txt uploaded by mnick (license )
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239839 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also, made a Makefile change to ensure that the expression parser C source files get
regenerated correctly, when we need that to happen.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239797 65c4cc65-6c06-0410-ace0-fbb531ad65f3
asterisk.conf's 'transmit_silence' option existed before
this patch, but was limited to only generating silence
while recording and sending DTMF. Now enabling the
transmit_silence option generates silence during wait
times as well.
To achieve this, ast_safe_sleep has been modified to
generate silence anytime no other generators are present
and transmit_silence is enabled. Wait apps not using
ast_safe_sleep now generate silence when transmit_silence
is enabled as well.
(closes issue #16524)
Reported by: kobaz
(closes issue #16523)
Reported by: kobaz
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/456/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239712 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The second is the default state for matching CID in the dialplan (no matching)
while the first matches one particular CallerID. This is a regression.
(fixes AST-314, SWP-611)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239571 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There is an issue which only affects trunk and the new ao2_callback OBJ_MULTIPLE
implementation. When both OBJ_MULTIPLE and OBJ_NODATA are passed, only the first
object is visited, regardless of what is returned by the specified callback. This
causes a problem when we are clearing a container, i.e.:
ao2_callback(container, OBJ_UNLINK | OBJ_NODATA | OBJ_MULTIPLE, NULL, NULL);
Only unlinks the first object. This patch resolves this.
(closes issue #16564)
Reported by: pj
Patches:
issue16564_20100111.diff uploaded by seanbright (license 71)
Tested by: pj, seanbright
Review: https://reviewboard.asterisk.org/r/457/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239113 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes a crash on Solaris.
(closes issue #16572)
Reported by: crjw
Patches:
frame_changes.patch uploaded by crjw (license 963)
Plus several others found and fixed by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239074 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During the process of removing an audiohook from one channel
and attaching it to another the audiohook's status is updated
to DONE and then back to whatever it was previously. Typically
updating the status after setting it to DONE is not a good idea
because DONE can trigger unrecoverable audiohook destruction
events... because of this a conditional check was added to
audiohook_update_status to explicitly prevent the audiohook
from ever changing after being set to DONE. It was this check
that prevented audiohook inherit from work properly though.
Now ast_audiohook_move_by_source is treated as a special exception,
as the audiohook must be returned to its previous status after
attaching it to the new channel. This is only a safe operation
because the audiohook's lock is held the entire time, otherwise
this could cause trouble.
(closes issue #16522)
Reported by: corruptor
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@238635 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The channel name comparison was not comparing the whole string and therefore
if one channel name was a substring of the other, the bridge would fail.
(closes issue #16528)
Reported by: telecos82
Patches:
res_features_r236843.diff uploaded by telecos82 (license 687)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@238134 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During a module reload if multiple extension configs are present,
such as both extensions.conf and extensions.ael, watchers for one
config's hints will be lost during the merging of the other config.
This happens because hint watchers are only preserved for the
current config being merged. The old context list is destroyed
after the merging takes place, meaning any watchers that were not
perserved will be removed.
Now all hints are preserved during merging regardless of what config
file is being merged. These hints are only restored if they
are present within the new context list.
(closes issue #16093)
Reported by: jlaroff
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@237839 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r237405 | tilghman | 2010-01-04 12:19:00 -0600 (Mon, 04 Jan 2010) | 16 lines
Add a flag to disable the Background behavior, for AGI users.
This is in a section of code that relates to two other issues, namely
issue #14011 and issue #14940), one of which was the behavior of
Background when called with a context argument that matched the current
context. This fix broke FreePBX, however, in a post-Dial situation.
Needless to say, this is an extremely difficult collision of several
different issues. While the use of an exception flag is ugly, fixing all
of the issues linked is rather difficult (although if someone would like
to propose a better solution, we're happy to entertain that suggestion).
(closes issue #16434)
Reported by: rickead2000
Patches:
20091217__issue16434.diff.txt uploaded by tilghman (license 14)
20091222__issue16434__1.6.1.diff.txt uploaded by tilghman (license 14)
Tested by: rickead2000
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@237406 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also add an XXX comment that I'm baffled nobody has ever complained about. We
say "first message", and then we go into language-specific stuff where we
proceed to say..."first message".
(closes issue #15053)
Reported by: dinhtrung
Patches:
vietnamese.ods uploaded by dinhtrung (license 776)
app_voicemail.c.diff uploaded by dinhtrung (license 776)
(closes issue #15626)
Reported by: dinhtrung
Patches:
say.c.diff uploaded by dinhtrung (license 776)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@237050 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Modified handle_verbose to be LOW_MEMORY aware, removed old RTP related code
in chan_sip.
(closes issue #16381)
Reported by: michael_iedema
Patches:
ast_complete_source_filename.patch uploaded by michael iedema (license 942)
modified by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@236893 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Unit Test Framework is a new API that manages registration and
execution of unit tests in Asterisk with the purpose of verifying the
operation of C functions. The Framework consists of a single test
manager accompanied by a list of registered test functions defined
within the code. A test is defined, registered, and unregistered
from the framework using a set of macros which allow the test code
to only be compiled within asterisk when the TEST_FRAMEWORK flag is
enabled in menuselect. This allows the test code to exist in the
same file as the C functions it intends to verify. Registered tests
may be viewed and executed via a set of new CLI commands. CLI commands
are also present for generating and exporting test results into xml
and txt formats.
For more information and use cases please refer to the documentation
provided at the beginning of the test.h file.
Review: https://reviewboard.asterisk.org/r/447/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@236027 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r235635 | jpeeler | 2009-12-18 16:29:51 -0600 (Fri, 18 Dec 2009) | 48 lines
Correct CDR dispositions for BUSY/FAILED
This patch is simple in that it reorders the disposition defines so that the fix
for issue 12946 works properly (the default CDR disposition was changed to
AST_CDR_NOANSWER). Also, the AST_CDR_FLAG_ORIGINATED flag was set in ast_call to
ensure all CDR records are written.
The side effects of CDR changes are scary, so I'm documenting the test cases
performed to attempt to catch any regressions. The following tests were all
performed using 1.4 rev 195881 vs head (235571) + patch:
A calls B
C calls B (busy)
Hangup C
Hangup A
(Both SIP and features)
A calls B
A blind transfers to C
Hangup C
(Both SIP and features)
A calls B
A attended transfers to C
Hangup C
A calls B
A attended transfers to C (SIP)
C blind transfers to A (features)
Hangup A
All of the test scenario CDRs matched.
The following tests were performed just with the patch to ensure proper operation
(with unanswered=yes):
exten =>s,1,Answer
exten =>s,n,ResetCDR(w)
exten =>s,n,ResetCDR(w)
exten =>s,1,ResetCDR(w)
exten =>s,n,ResetCDR(w)
(closes issue #16180)
Reported by: aatef
Patches:
bug16180.patch uploaded by jpeeler (license 325)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@235660 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r235421 | tilghman | 2009-12-17 11:17:51 -0600 (Thu, 17 Dec 2009) | 8 lines
Use context from which Macro is executed, not macro context, if applicable.
Also, ensure that the extension COULD match, not just that it won't match more.
(closes issue #16113)
Reported by: OrNix
Patches:
20091216__issue16113.diff.txt uploaded by tilghman (license 14)
Tested by: OrNix
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@235422 65c4cc65-6c06-0410-ace0-fbb531ad65f3
New parameters ExtraContext, ExtraExtension, and ExtraPriority have been added
to redirect the second channel to a different location. Previously, it was only
possible to redirect both channels to the same place.
(closes issue #15853)
Reported by: haakon
Patches:
trunk-manager.c.patch uploaded by haakon (license 880)
Tested by: jpeeler
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@235265 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As described in the CHANGES file:
* MeetMe has a new option 'G' to play an announcement before joining a
conference.
* Page has a new option 'A(x)' which will playback an announcement
simultaneously to all paged phones (and optionally excluding the caller's one
using the new option 'n') before the call is bridged.
To add the new option to meetme, the conference flag options had to be extended
to 64 bits.
(closes issue #14365)
Reported by: dferrer
Patches:
page_announce.patch uploaded by dferrer (license 525)
modified by me
Review: https://reviewboard.asterisk.org/r/188/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@234173 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r233092 | russell | 2009-12-04 11:12:47 -0600 (Fri, 04 Dec 2009) | 7 lines
Only do frame payload check for HOLD frames.
This code was added for helping to debug the source of invalid HOLD frames.
However, a side effect of this is that it will incorrectly report errors for
frames that have an integer payload. Make the check for this block specific
to the HOLD frame case.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@233100 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r233014 | mnick | 2009-12-04 09:17:03 -0600 (Fri, 04 Dec 2009) | 11 lines
Warning message gets displayed only once
Added additional field 'int display_inband_dtmf_warning', which when set to '1' displays the warning ('Inband DTMF is not supported on codec %s. Use RFC2833'), and when set to '0' doesn't display the warning. Otherwise you would get hundreds of warnings every second.
(closes issue #15769)
Reported by: falves11
Patches:
patch_15769_14.txt uploaded by mnick (license 874)
Tested by: mnick, falves11
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@233046 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This option can be used to enable #exec support in the asterisk.conf configuration file.
(closes issue #16260)
Reported by: atis
Patches:
exec_includes.patch uploaded by atis (license 242)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@232510 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r231911 | jpeeler | 2009-12-01 15:29:31 -0600 (Tue, 01 Dec 2009) | 12 lines
Fix crash with invalid frame data
The crash was happening as a result of a frame containing an invalid data
pointer, but was set with data length of zero. The few times the issue was
reproduced it _seemed_ that the frame was queued properly, that is the data
pointer was set to NULL. I never could reproduce the crash so as a last resort
the crash has been fixed, but a check in __ast_read has been added to give as
much information about the source of problematic frames in the future.
(closes issue #16058)
Reported by: atis
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231927 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the process of swapping ULAW to a place in the extended codec space, we
found several unhandled cases, where a 32-bit integer was still being used to
handle a codec field. Most of these have been fixed with this commit, although
there is at least one case (codec_dahdi) which depends upon outside headers to
be altered before a conversion can be made.
(Fixes AST-278, SWP-459)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231850 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) Allow users of UDPTL stack to associate a character-string tag with a UDPTL
session, so that log/error/debug messages generated by the UDPTL stack can
be 'connected' to the endpoint that caused them to be generated.
2) Improve comments (and process) of calculating the far end's maximum IFP size
when redundancy mode is in use for error correction.
3) When an IFP larger than the calculated 'far max IFP' size is presented for
writing, truncate it rather than putting in the buffer and allowing the buffer
to overflow; this will cause the ends to retrain to a lower bit rate that
produces IFPs of an appropriate size if possible, and if not possible, the
FAX transfer will fail completely. In these cases, it is due to the one endpoint
supplying a T38FaxMaxDatagram value that is improperly calculated and is
too low to be of use; we have configuration options available to override
this behavior.
4) Eliminate use of T38FaxMaxDatagram value in udptl.conf; it is no longer
needed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_spawn_extension behaves differently from 1.4 in that hangups and extensions
that do not exist do not return an error, whereas in 1.6 it does. This is now
taken into account so that the AST_FLAG_BRIDGE_HANGUP_RUN flag gets set
properly.
(closes issue #16106)
Reported by: ajohnson
Tested by: ajohnson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231095 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r230627 | mnicholson | 2009-11-20 14:53:06 -0600 (Fri, 20 Nov 2009) | 8 lines
Copy the peer CDR's userfield to the bridge CDR if it exists. This is necessary for the recordagentcalls option in chan_agent to store the recorded file name in the bridge CDR.
(closes issue #14590)
Reported by: msetim
Patches:
queue_agent_userfield.patch uploaded by Laureano (license 265)
Tested by: Laureano, mnicholson
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@230628 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r229360 | tilghman | 2009-11-10 16:09:16 -0600 (Tue, 10 Nov 2009) | 12 lines
If two pattern classes start with the same digit and have the same number of characters, they will compare equal.
The example given in the issue report is that of [234] and [246], which have
these characteristics, yet they are clearly not equivalent. The code still
uses these two characteristics, yet when the two scores compare equal, an
additional check will be done to compare all characters within the class to
verify equality.
(closes issue #15421)
Reported by: jsmith
Patches:
20091109__issue15421__2.diff.txt uploaded by tilghman (license 14)
Tested by: jsmith, thedavidfactor
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@229361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* chan_console accessed pvts after deallocation.
* cdr_mysql stored a pointer that was freed by realloc()
* The module loader did not check usecount on shutdown, which led to chan_iax2
reading a timer that was already unloaded.
* The event subsystem sometimes creates an event with no IEs. Due to a corner
condition, the code would read beyond the memory boundary.
* res_pktccops did not correctly check whether its monitor thread was started.
(closes issue #16062)
Reported by: alexanderheinz
Patches:
20091109__issue16062.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@228798 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch, originally submitted by jozza, enables custom modules to send actions to AMI
and receive messages from AMI via a hook interface. Included is a simple test module to
illustrate the interface.
(closes issue #14635)
Reported by: jozza
Review: https://reviewboard.asterisk.org/r/412/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@227448 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a side project I've been poking at this week. The intent is to discuss
Asterisk architecture in a top down fashion to help new developers understand how
Asterisk is put together. There is a ton of stuff to write about, so this will
just continue to evolve over time.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@226606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r226138 | tilghman | 2009-10-27 15:16:49 -0500 (Tue, 27 Oct 2009) | 7 lines
Manager output is not always NULL-terminated, so force a NULL at the end of the filestream.
(closes issue #15495)
Reported by: pdf
Patches:
20090916__issue15495.diff.txt uploaded by tilghman (license 14)
Tested by: pdf
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@226159 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The code committed in revision 225405 was broken; instead of removing the unreference code,
the logic used to decide when to do it should have been reversed. This patch corrects the
situation, and makes reference counting work properly again.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225955 65c4cc65-6c06-0410-ace0-fbb531ad65f3
What this patch fixes
1.Moves sip TCP/TLS connection setup into the TCP helper thread:
Connection setup takes awhile and before this it was being
done while holding the monitor lock.
2.Moves TCP/TLS writing to the TCP helper thread: Through the
use of a packet queue and an alert pipe, the TCP helper thread
can now be woken up to write data as well as read data.
3.Locking error: sip_xmit returned an XMIT_ERROR without giving
up the tcptls_session lock. This lock has been completely removed
from sip_xmit and placed in the new sip_tcptls_write() function.
4.Memory leak: When creating a tcptls_client the tls_cfg was alloced
but never freed unless the tcptls_session failed to start. Now the
session_args for a sip client are an ao2 object which frees the
tls_cfg on destruction.
5.Pointer to stack variable: During sip_prepare_socket the creation
of a client's ast_tcptls_session_args was done on the stack and
stored as a pointer in the newly created tcptls_session. Depending
on the events that followed, there was a slight possibility that
pointer could have been accessed after the stack returned. Given
the new changes, it is always accessed after the stack returns
which is why I found it.
Notable code changes
1.I broke tcptls.c's ast_tcptls_client_start() function into two
functions. One for creating and allocating the new tcptls_session,
and a separate one for starting and handling the new connection.
This allowed me to create the tcptls_session, launch the helper
thread, and then establish the connection within the helper thread.
2.Writes to a tcptls_session are now done within the helper thread.
This is done by using an alert pipe to wake up the thread if new
data needs to be sent. The thread's sip_threadinfo object contains
the alert pipe as well as the packet queue.
3.Since the threadinfo object contains the alert pipe, it must now be
accessed outside of the helper thread for every write (queuing of a
packet). For easy lookup, I moved the threadinfo objects from a
linked list to an ao2_container.
(closes issue #13136)
Reported by: pabelanger
Tested by: dvossel, whys
(closes issue #15894)
Reported by: dvossel
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/380/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225445 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When an object is being unlinked from its container *and* being returned to
the caller, we do not want to decrement the reference count after unlinking
it from the container, as the reference that the container held is what we
are returning to the caller... and if it was the only remaining reference to
the object, that could result in the object being destroyed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225405 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Telecom Specs in NZ suggests that SUB ADDRESS is always on, so doing
"desk to desk" between offices each with an asterisk box over the ISDN
should then be possible, without a whole load of DDI numbers required.
(closes issue #15604)
Reported by: alecdavis
Patches:
asterisk_subaddr_trunk.diff11.txt uploaded by alecdavis (license 585)
Some minor modificatons were made.
Tested by: alecdavis, rmudgett
Review: https://reviewboard.asterisk.org/r/405/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225357 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch finishes the implementation of OBJ_MULTIPLE in astobj2 (the
case where multiple results need to be returned; OBJ_NODATA mode
already was supported). In addition, it converts ast_channel_iterators
(only the targeted versions, not the ones that iterate over all
channels) to use this method.
During this work, I removed the 'ao2_flags' arguments to the
ast_channel_iterator constructor functions; there were no uses of that
argument yet, there is only one possible flag to pass, and it made the
iterators less 'opaque'. If at some point in the future someone really
needs an ast_channel_iterator that does not lock the container, we can
provide constructor(s) for that purpose.
Review: https://reviewboard.asterisk.org/r/379/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225244 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r224855 | tilghman | 2009-10-20 17:07:11 -0500 (Tue, 20 Oct 2009) | 5 lines
Pay attention to the return value of the manipulate function.
While this looks like an optimization, it prevents a crash from occurring
when used with certain audiohook callbacks (diagnosed with SVN trunk,
backported to 1.4 to keep the source consistent across versions).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@224856 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Two examples of its use are included, and the usage could be expanded in some
cases into certain configuration options where time periods are specified.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@224225 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r223485 | russell | 2009-10-11 12:22:52 -0500 (Sun, 11 Oct 2009) | 6 lines
Don't use data outside of its scope.
The purpose of this code was to have a hangup frame put on the list of deferred
frames. However, the code that read the hangup frame was outside of the scope
of where the hangup frame was declared.
........
r223486 | russell | 2009-10-11 12:25:06 -0500 (Sun, 11 Oct 2009) | 2 lines
Remove some unnecessary code.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@223487 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r222878 | russell | 2009-10-08 14:45:47 -0500 (Thu, 08 Oct 2009) | 44 lines
Make filestream frame handling safer by isolating frames before returning them.
This patch is related to a number of issues on the bug tracker that show
crashes related to freeing frames that came from a filestream. A number of
fixes have been made over time while trying to figure out these problems, but
there re still people seeing the crash. (Note that some of these bug reports
include information about other problems. I am specifically addressing
the filestream frame crash here.)
I'm still not clear on what the exact problem is. However, what is _very_
clear is that we have seen quite a few problems over time related to unexpected
behavior when we try to use embedded frames as an optimization. In some cases,
this optimization doesn't really provide much due to improvements made in other
areas.
In this case, the patch modifies filestream handling such that the embedded frame
will not be returned. ast_frisolate() is used to ensure that we end up with a
completely mallocd frame. In reality, though, we will not actually have to malloc
every time. For filestreams, the frame will almost always be allocated and freed
in the same thread. That means that the thread local frame cache will be used.
So, going this route doesn't hurt.
With this patch in place, some people have reported success in not seeing the
crash anymore.
(SWP-150)
(AST-208)
(ABE-1834)
(issue #15609)
Reported by: aragon
Patches:
filestream_frisolate-1.4.diff2.txt uploaded by russell (license 2)
Tested by: aragon, russell
(closes issue #15817)
Reported by: zerohalo
Tested by: zerohalo
(closes issue #15845)
Reported by: marhbere
Review: https://reviewboard.asterisk.org/r/386/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222880 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channels are stored in an ao2_container. When accessing an item within
an ao2_container the proper locking order is to first lock the container,
and then the items within it.
In ast_do_masquerade both the clone and original channel must be locked
for the entire duration of the function. The problem with this is that
it attemptes to unlink and link these channels back into the ao2_container
when one of the channel's name changes. This is invalid locking order as
the process of unlinking and linking will lock the ao2_container while
the channels are locked!!! Now, both the channels in do_masquerade are
unlinked from the ao2_container and then locked for the entire function.
At the end of the function both channels are unlocked and linked back
into the container with their new names as hash values.
This new method of requiring all channels and tech pvts to be unlocked
before ast_do_masquerade() or ast_change_name() required several
changes throughout the code base.
(closes issue #15911)
Reported by: russell
Patches:
masq_deadlock_trunk.diff uploaded by dvossel (license 671)
Tested by: dvossel, atis
(closes issue #15618)
Reported by: lmsteffan
Patches:
deadlock_local_attended_transfers_trunk.diff uploaded by dvossel (license 671)
Tested by: lmsteffan, dvossel
Review: https://reviewboard.asterisk.org/r/387/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222761 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r222152 | kpfleming | 2009-10-05 20:16:36 -0500 (Mon, 05 Oct 2009) | 20 lines
Fix ao2_iterator API to hold references to containers being iterated.
See Mantis issue for details of what prompted this change.
Additional notes:
This patch changes the ao2_iterator API in two ways: F_AO2I_DONTLOCK
has become an enum instead of a macro, with a name that fits our
naming policy; also, it is now necessary to call
ao2_iterator_destroy() on any iterator that has been
created. Currently this only releases the reference to the container
being iterated, but in the future this could also release other
resources used by the iterator, if the iterator implementation changes
to use additional resources.
(closes issue #15987)
Reported by: kpfleming
Review: https://reviewboard.asterisk.org/r/383/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222176 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Many T.38 endpoints incorrectly send the maximum IFP frame size they can accept
as the T38FaxMaxDatagram value in their SDP, when in fact this value is
supposed to be the maximum UDPTL payload size (datagram size) they can accept.
If the value they supply is small enough (a commonly supplied value is '72'),
T.38 UDPTL transmissions will likely fail completely because the UDPTL packets
will not have enough room for a primary IFP frame and the redundancy used for
error correction. If this occurs, the Asterisk UDPTL stack will emit log messages
warning that data loss may occur, and that the value may need to be overridden.
This patch extends the 't38pt_udptl' configuration option in sip.conf to allow
the administrator to override the value supplied by the remote endpoint and
supply a value that allows T.38 FAX transmissions to be successful with that
endpoint. In addition, in any SIP call where the override takes effect, a debug
message will be printed to that effect. This patch also removes the
T38FaxMaxDatagram configuration option from udptl.conf.sample, since it has not
actually had any effect for a number of releases.
In addition, this patch cleans up the T.38 documentation in sip.conf.sample
(which incorrectly documented that T.38 support was passthrough only).
(issue #15586)
Reported by: globalnetinc
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222110 65c4cc65-6c06-0410-ace0-fbb531ad65f3
chan_sip has had the ability to control T.38 FAX error correction mode on a per-peer
(or global) basis for a couple of releases now, which is where it should have been
all along. This patch removes the ability to configure it in udptl.conf, but issues
a warning if the user tries to do, telling them to look at sip.conf.sample for how
to configure it now. For any SIP peers that are T.38 enabled in sip.conf, there is
already a default for FEC error correction even if the user does not specify any mode,
so this change will not turn off error correction by default, it will have the same
default value that has been in the udptl.conf sample file.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@221592 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r221086 | twilson | 2009-09-30 09:49:11 -0500 (Wed, 30 Sep 2009) | 25 lines
Change the SSRC by default when our media stream changes
Be default, change SSRC when doing an audio stream changes Asterisk doesn't
honor marker bit when reinvited to already-bridged RTP streams,resulting in
far-end stack discarding packets with "old" timestamps that areactually part of
a new stream. This patch sends AST_CONTROL_SRCUPDATE whenever there is a
reinvite, unless the 'constantssrc' is set to true in sip.conf.
The original issue reported to Digium support detailed the following situation:
ITSP <-> Asterisk 1.4.26.2 <-> SIP-based Application Server Call comes in
fromITSP, Asterisk dials the app server which sends a re-invite back
toAsterisk--not to negotiate to send media directly to the ITSP, but to
indicatethat it's changing the stream it's sending to Asterisk. The app
servergenerates a new SSRC, sequence numbers, timestamps, and sets the marker
bit on the new stream. Asterisk passes through the teimstamp of the new stream,
butdoes not reset the SSRC, sequence numbers, or set the marker bit.
When the timestamp on the new stream is older than the timestamp on the
originalstream, the ITSP (which doesn't know there has been any change) discards
the newframes because it thinks they are too old. This patch addresses this by
changing the SSRC on a stream update unless constantssrc=true is set in
sip.conf.
Review: https://reviewboard.asterisk.org/r/374/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@221266 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_cel_report_event would geet a reference to the
bridged channel. However, certain return paths, such
as if CEL was not enabled, would result in a reference
leak. All return paths now properly unref the channel.
(closes issue #15991)
Reported by: mmichelson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@220995 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Including version.h here causes this file to get recompiled after
every commit or update, which is not needed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@220496 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_channel_get_full() tries to use OBJ_POINTER to optimize name-based
channel lookups, but this will not work properly when the channel's full
name was not supplied; for name-prefix searches, there is no value in
doing a hash-based lookup, and in fact doing so could result in many
channels being skipped.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@220494 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Most of the functionality here is gained simply by setting the feature flag
on the bridge config. However, the dial limit functionality has been moved from
app_dial to the features code and has been made public so both app_dial and
the bridge app can use it.
(closes issue #13165)
Reported by: tim_ringenbach
Patches:
app_bridge_options_r138998.diff uploaded by tim ringenbach (license 540),
modified by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@220344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r219136 | mnicholson | 2009-09-17 09:58:39 -0500 (Thu, 17 Sep 2009) | 10 lines
Prevent a potential race condition and crash when hanging up a channel by removing the channel from the channel list before begining channel tear down.
This fix may potentially cause problems with CDR backends that access the channel a CDR is associated with via the channel list. This fix makes the channel unavabile at the time when the CDR backend is invoked. This has been documented in include/asterisk/cdr.h.
(closes issue #15316)
Reported by: vmarrone
Tested by: mnicholson
Review: https://reviewboard.asterisk.org/r/362/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@219139 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r218867 | dbrooks | 2009-09-16 13:00:45 -0500 (Wed, 16 Sep 2009) | 13 lines
Fixes CID pattern matching behavior to mirror that of extension pattern matching.
Pattern matching for extensions uses a type of scoring system, giving values for
specificity to each character in the pattern. Unfortunately, this is done character
by character, in order. This does lead to some less specific patterns being first
in line for matching, but it will usually get the job done.
This patch merely brings CID matching to the same level as extension matching.
This patch does not attempt to tackle the problem shared by extension matching.
(closes issue #14708)
Reported by: klaus3000
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@218868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In passing, correct the formatting of the Timestamp attribute so that there is a
space after the colon and before the value.
(closes issue #15861)
Reported by: Ivan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@217408 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r216430 | oej | 2009-09-04 15:45:48 +0200 (Fre, 04 Sep 2009) | 27 lines
Make apps send PROGRESS control frame for early media and fix too early media issue in SIP
The issue at hand is that some legacy (dying) PBX systems send empty media frames on PRI
links *before* any call progress. The SIP channel receives these frames and by default
signals 183 Session progress and starts sending media. This will cause phones to
play silence and ignore the later 180 ringing message. A bad user experience.
The fix is twofold:
- We discovered that asterisk apps that support early media ("noanswer") did not send
any PROGRESS frame to indicate early media. Fixed.
- We introduce a setting in chan_sip so that users can disable any relay of media frames
before the outbound channel actually indicates any sort of call progress.
In 1.4, 1.6.0 and 1.6.1, this will be disabled for backward compatibility. In later versions
of Asterisk, this will be enabled. We don't assume that it will change your Asterisk
phone experience - only for the better.
We encourage third-party application developers to make sure that if they have applications
that wants to send early media, add a PROGRESS control frame transmission to make sure that
all channel drivers actually will start sending early media. This has not been the default
in Asterisk previous to this patch, so if you got inspiration from our code, you need to
update accordingly. Sorry for the trouble and thanks for your support.
This code has been running for a few months in a large scale installation (over 250
servers with PRI and/or BRI links to old PBX systems).
That's no proof that this is an excellent patch, but, well, it's tested :-)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@216438 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a document describing the language prompt submission process,
licensing terms and other issues related to that process. In addition, it
modifies the sound file searching process to support language codes with
any number of suffices (not limited to just "xx" or "xx_YY"), so that prompts
can be named with gender, customer/company, etc. suffices as well.
(closes issue #15771)
Reported by: jtodd
Patches:
language-criteria.txt uploaded by jtodd
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@216006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Init the parkings list member of struct parkinglot.
Thanks Sean for the explanation why this should be here.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@215622 65c4cc65-6c06-0410-ace0-fbb531ad65f3
One note on defining _POSIX_C_SOURCE: while this feature test macro
works to require certain behaviors on Linux, it works differently on *BSD
platforms to REMOVE certain API calls that are not in the POSIX specification,
such as vasprintf(3). Thus, defining it while depending upon vasprintf (and
other extensions to the POSIX standard) to be defined is a recipe to ensure
that Asterisk is only buildable on Linux.
Hence, this define which was meant to INCREASE portability, effectively
ensures the opposite.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@214863 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r214701 | tilghman | 2009-08-28 15:13:32 -0500 (Fri, 28 Aug 2009) | 8 lines
Modify comment to be a bit more accurate.
We have kept this comment around long enough, that it's pretty clear that we're
keeping the code, because changing the code would require a pretty fundamental
architectural shift. We've also taken criticism in some quarters, because it
was believed that it was referring to the code being nasty. No, the code isn't
nasty, just the operation itself is rather odd. Fixed for eternity (probably
not).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@214702 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #15786)
Reported by: a_villacis
Patches:
asterisk-1.6.2.0-beta4-manager-fix-crash-on-include-nonexistent-file.patch uploaded by a villacis (license 660)
(Plus a few of my own, to catch the remaining places within manager.c where it could have been a problem)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@214514 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added DYNAMIC_FEATURENAME which holds the last triggered dynamic feature.
Added DYNAMIC_PEERNAME which holds the unique channel name on the other side
and is set when a dynamic feature is triggered.
(closes issue #14663)
Reported by: tamiel
Patches:
20090313_features.diff uploaded by tamiel (license 712)
Tested by: tamiel
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@214309 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r214194 | dvossel | 2009-08-26 11:36:42 -0500 (Wed, 26 Aug 2009) | 19 lines
ast_write() ignores ast_audiohook_write() results
In ast_write(), if a channel has a list of audiohooks, those
lists are written to and the resulting frame is what ast_write()
should continue with. The problem was the returned audiohook frame
was not being handled at all, and the original frame passed
into it did not contain the mixed audio, so essentially audio
was being lost. One result of this was chan_spy's whisper
mode no longer worked. To complicate the issue, frames
passed into ast_write may either be a single frame, or a list
of frames. So, as the list of frames is processed in the
audiohook_write, the returned frames had to be added to a new
list.
(closes issue #15660)
Reported by: corruptor
Tested by: dvossel
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@214195 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r212763 | seanbright | 2009-08-18 12:36:00 -0400 (Tue, 18 Aug 2009) | 11 lines
Delay the creation of temporary files until we have a valid manager command to handle.
Without this patch, asterisk creates a temporary file before determining if the
specified command is valid. If invalid, we weren't properly cleaning up the file.
(closes issue #15730)
Reported by: zmehmood
Patches:
M15730.diff uploaded by junky (license 177)
Tested by: zmehmood
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@212764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The logic here was reversed as ast_safe_system returns -1 on error and not on
success. Fix suggested by reporter.
(closes issue #15667)
Reported by: loic
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@212574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Based on a post on the gcc-help mailing list and some subsequent reading,
we can increase our portability to various platforms by directly defining
the POSIX and X/OPEN API feature sets we wish to have available. This patch
does that, and also includes a double-check to ensure that the system
we are compiling on can actually provide the requested feature sets.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@212463 65c4cc65-6c06-0410-ace0-fbb531ad65f3
documentation of a function/application.
This will make reading the docs on the CLI way more easy.
(closes issue #15694)
Reported by: mvanbaak
Patches:
2009081100-extralinesoptionlist.diff.txt uploaded by mvanbaak (license 7)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@212339 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Even though the get_channel_by_name() API advertised that you could search by
name or uniqueid (just as the old API did), searching by uniqueid was not
actually implemented. This patch fixes that problem.
The ast_channel_get_full() function now makes a second search attempt by
uniqueid if the parameter was a name. The channel comparison function also
now knows how to compare by unqieueid.
Finally, a bug was fixed in passing where OBJ_POINTER was being passed in some
scenarios where it should not have been.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@211390 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some T.38 endpoints treat T38FaxMaxDatagram as the maximum IFP size that should
be sent to them, rather than the maximum packet payload size. If such an
endpoint also requests UDPRedundancy as the error correction mode, we'll end
up calculating a tiny maximum IFP size, so small as to be unusable. This patch
sets a lower bound on what we'll consider the remote's maximum IFP size to be,
assuming that endpoints that do this really can accept larger packets than
they've offered to accept.
(closes issue #15649)
Reported by: dazza76
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@210992 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r210913 | tilghman | 2009-08-06 16:45:01 -0500 (Thu, 06 Aug 2009) | 7 lines
Because channel information can be accessed outside of the channel thread, we must lock the channel prior to modifying it.
(closes issue #15397)
Reported by: caspy
Patches:
20090714__issue15397.diff.txt uploaded by tilghman (license 14)
Tested by: caspy
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@210914 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The find_channel_by_group callback was only looking at the channel that was
attempting to make the pickup instead of the other channels in the container.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@210302 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r209759 | kpfleming | 2009-07-31 19:52:00 -0500 (Fri, 31 Jul 2009) | 7 lines
Minor changes inspired by testing with latest GCC.
The latest GCC (what will become 4.5.x) has a few new warnings, that in these
cases found some either downright buggy code, or at least seriously poorly
designed code that could be improved.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@209760 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r209131 | mmichelson | 2009-07-27 12:44:06 -0500 (Mon, 27 Jul 2009) | 18 lines
Allow for UDPTL to use only even-numbered ports if desired.
There are some VoIP providers out there that will not accept SDP
offers with odd numbered UDPTL ports. While it is my personal opinion
that these VoIP providers are misinterpreting RFC 2327, it really is
not a big deal to play along with their silly little games. Of course,
since restricting UDPTL ports to only even numbers reduces the range
of available ports by half, so the option to use only even port numbers
is off by default. A user can enable the behavior by setting
use_even_ports=yes in udptl.conf.
(closes issue #15182)
Reported by: CGMChris
Patches:
15182.patch uploaded by mmichelson (license 60)
Tested by: CGMChris
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@209132 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Requiring 'module reload' to reload everything, including
core etc makes russell very unhappy.
The default configuration already loads the 'friendly' aliases template.
Added 'reload=module reload' to that template.
Also removed the comment in main/cli.c that reload should come back.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@208813 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r208746 | jpeeler | 2009-07-25 01:19:50 -0500 (Sat, 25 Jul 2009) | 7 lines
Fix compiling under dev-mode with gcc 4.4.0.
Mostly trivial changes, but I did not know of any other way to fix the
"dereferencing type-punned pointer will break strict-aliasing rules" error
without creating a tmp variable in chan_skinny.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@208749 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I keep getting annoyed at having to type "module reload" to reload everything,
so I'm adding a note that we need to add "reload" back. "module reload" doesn't
really make sense as the command to reload everything, including the core.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@208706 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The udptl-updates branch that was merged yesterday failed to properly send back
T.38 SDP responses with the correct error correction mode, if the incoming SDP
from the other end caused us to change error correction modes. This patch
corrects that situation.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@208548 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Over the past couple of months, a number of issues with Asterisk
negotiating (and successfully completing) T.38 sessions with various
endpoints have been found. This patch attempts to address many of
them, primarily focused around ensuring that the endpoints'
MaxDatagram size is honored, and in addition by ensuring that T.38
session parameter negotiation is performed correctly according to the
ITU T.38 Recommendation.
The major changes here are:
1) T.38 applications in Asterisk (app_fax) only generate/receive IFP
packets, they do not ever work with UDPTL packets. As a result of
this, they cannot be allowed to generate packets that would overflow
the other endpoints' MaxDatagram size after the UDPTL stack adds any
error correction information. With this patch, the application is told
the maximum *IFP* size it can generate, based on a calculation using
the far end MaxDatagram size and the active error correction mode on
the T.38 session. The same is true for sending *our* MaxDatagram size
to the remote endpoint; it is computed from the value that the
application says it can accept (for a single IFP packet) combined with
the active error correction mode.
2) All treatment of T.38 session parameters as 'capabilities' in
chan_sip has been removed; these parameters are not at all like
audio/video stream capabilities. There are strict rules to follow for
computing an answer to a T.38 offer, and chan_sip now follows those
rules, using the desired parameters from the application (or channel)
that wants to accept the T.38 negotiation.
3) chan_sip now stores and forwards ast_control_t38_parameters
structures for tracking 'our' and 'their' T.38 session parameters;
this greatly simplifies negotiation, especially for pass-through
calls.
4) Since T.38 negotiation without specifying parameters or receiving
the final negotiated parameters is not very worthwhile, the
AST_CONTROL_T38 control frame has been removed. A note has been added
to UPGRADE.txt about this removal, since any out-of-tree applications
that use it will no longer function properly until they are upgraded
to use AST_CONTROL_T38_PARAMETERS.
Review: https://reviewboard.asterisk.org/r/310/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@208464 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r207647 | kpfleming | 2009-07-21 08:04:44 -0500 (Tue, 21 Jul 2009) | 12 lines
Ensure that user-provided CFLAGS and LDFLAGS are honored.
This commit changes the build system so that user-provided flags (in ASTCFLAGS
and ASTLDFLAGS) are supplied to the compiler/linker *after* all flags provided
by the build system itself, so that the user can effectively override the
build system's flags if desired. In addition, ASTCFLAGS and ASTLDFLAGS can now
be provided *either* in the environment before running 'make', or as variable
assignments on the 'make' command line. As a result, the use of COPTS and LDOPTS
is no longer necessary, so they are no longer documented, but are still supported
so as not to break existing build systems that supply them when building Asterisk.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@207680 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r207360 | russell | 2009-07-20 11:26:24 -0500 (Mon, 20 Jul 2009) | 9 lines
Only do the chan->fdno check in ast_read() in a developer build.
I changed this check to only happen in a dev-mode build. I also added a
comment explaining what is going on. I also made it so that detection of
this situation does not affect ast_read() operation.
(closes issue #14723)
Reported by: seadweller
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@207361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r206867 | dvossel | 2009-07-16 16:24:16 -0500 (Thu, 16 Jul 2009) | 8 lines
avoid segfault caused by user error
If the CALLERPRES() dialplan function is set to nothing,
a segfault occurs. This is user error to begin with, but
I'd rather see a cli warning message than have Asterisk
crash on me.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@206868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit introduces the security events API. This API is to be used by
Asterisk components to report events that have security implications.
A simple example is when a connection is made but fails authentication. These
events can be used by external tools manipulate firewall rules or something
similar after detecting unusual activity based on security events.
Inside of Asterisk, the events go through the ast_event API. This means that
they have a binary encoding, and it is easy to write code to subscribe to these
events and do something with them.
One module is provided that is a subscriber to these events - res_security_log.
This module turns security events into a parseable text format and sends them
to the "security" logger level. Using logger.conf, these log entries may be
sent to a file, or to syslog.
One service, AMI, has been fully updated for reporting security events.
AMI was chosen as it was a fairly straight forward service to convert.
The next target will be chan_sip. That will be more complicated and will
be done as its own project as the next phase of security events work.
For more information on the security events framework, see the documentation
generated from doc/tex/. "make asterisk.pdf"
Review: https://reviewboard.asterisk.org/r/273/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@206021 65c4cc65-6c06-0410-ace0-fbb531ad65f3
pthread implementations. Casting it to an unsigned int fixes compiler warnings.
Tested on OpenBSD and Linux both 32 and 64 bit
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@205532 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Park() was not respecting the arguments passed to it. Any extension/context/priority
given to it was being ignored. This patch remedies this.
(closes issue #15380)
Reported by: DLNoah
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@205254 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While doing some reading about OpenSSL, I noticed a couple of things that
needed to be improved with our usage of OpenSSL.
1) We had initialization of the library done in multiple modules. This has now
been moved to a core function that gets executed during Asterisk startup.
We already link OpenSSL into the core for TCP/TLS functionality, so this
was the most logical place to do it.
2) OpenSSL is not thread-safe by default. However, making it thread safe is
very easy. We just have to provide a couple of callbacks. One callback
returns a thread ID. The other handles locking. For more information,
start with the "Is OpenSSL thread-safe?" question on the FAQ page of
openssl.org.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@205120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change allows applications that request T.38 negotiation on a channel that
does not support it to get the proper indication that it is not supported, rather
than thinking that negotiation was started when it was not.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204948 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r204681 | dvossel | 2009-07-02 10:05:57 -0500 (Thu, 02 Jul 2009) | 14 lines
Improved mapping of extension states from combined device states.
This fixes a few issues with incorrect extension states and adds
a cli command, core show device2extenstate, to display all possible
state mappings.
(closes issue #15413)
Reported by: legart
Patches:
exten_helper.diff uploaded by dvossel (license 671)
Tested by: dvossel, legart, amilcar
Review: https://reviewboard.asterisk.org/r/301/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204710 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r204556 | tilghman | 2009-06-30 15:23:51 -0500 (Tue, 30 Jun 2009) | 6 lines
More incorrect language codes, plus ensuring that regionalizations use the specified language, and not English for grammar.
(closes issue #15022)
Reported by: greenfieldtech
Patches:
20090519__issue15022.diff.txt uploaded by tilghman (license 14)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204563 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Someone asked yesterday, "is there a good reason why we can't just put these
modules in Asterisk?". After a brief discussion, as long as the modules are
clearly set aside in their own directory and not enabled by default, it is
perfectly fine.
For more information about why a module goes in addons, see README-addons.txt.
chan_ooh323 does not currently compile as it is behind some trunk API updates.
However, it will not build by default, so it should be okay for now.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r203785 | russell | 2009-06-26 16:16:39 -0500 (Fri, 26 Jun 2009) | 15 lines
Don't fast forward past the end of a message.
This is nice change for users of the voicemail application. If someone gets a
little carried away with fast forwarding through a message, they can easily
get to the end and accidentally exit the voicemail application by hitting the
fast forward key during the following prompt.
This adds some safety by not allowing a fast forward past the end of a message.
(closes issue #14554)
Reported by: lacoursj
Patches:
21761.patch uploaded by lacoursj (license 707)
Tested by: lacoursj
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CEL is the new system for logging channel events. This was inspired after
facing many problems trying to represent what is possible to happen to a call
in Asterisk using CDR records. For more information on CEL, see the built in
HTML or PDF documentation generated from the files in doc/tex/.
Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard
work developing this code. Also, thanks to Matt Nicholson (mnicholson) and
Sean Bright (seanbright) for their assistance in the final push to get this
code ready for Asterisk trunk.
Review: https://reviewboard.asterisk.org/r/239/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also change the default casing of the string contants to lowercase. This really
just saves us from have to lowercase them later when displaying them.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203605 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r203375 | russell | 2009-06-25 16:02:18 -0500 (Thu, 25 Jun 2009) | 9 lines
Fix a case where CDR answer time could be before the start time involving parking.
(closes issue #13794)
Reported by: davidw
Patches:
13794.patch uploaded by murf (license 17)
13794.patch.160 uploaded by murf (license 17)
Tested by: murf, dbrooks
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203376 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Modules placed in the priority heap for loading were not properly removed from the linked list. This resulted in some modules attempting to load twice.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@202410 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Mark Michelson
David Vossel
Tilghman Lesher
Russell Bryant
Jason Parker
Sean Bright
Jeff Peeler
Olle Johansson
Alec L Davis
Matthew Nicholson
Kevin P. Fleming
Matthias Nick
Joshua Colp
David Brooks
Leif Madsen
Richard Mudgett
Terry Wilson
Michiel van Baak
Ryan Brindley