https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277625 | tringenbach | 2010-07-16 17:43:39 -0500 (Fri, 16 Jul 2010) | 9 lines
Save and restore AST_FLAG_BRIDGE_HANGUP_DONT on attended transfer.
ast_bridge_call() clears AST_FLAG_BRIDGE_HANGUP_DONT. But during an attended
transfer, ast_bridge_call() is called for a second bridge on the same channel,
and it clears that flag, which still needs to get set for when the original
ast_bridge_call() gets control back and checks it.
Review: https://reviewboard.asterisk.org/r/741
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277657 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277247 | mnicholson | 2010-07-16 12:29:57 -0500 (Fri, 16 Jul 2010) | 4 lines
For pass through DTMF tones, measure the actual duration between the begin and end packets on the wire. If it is detected to be less than AST_MIN_DTMF_DURATION, trigger dtmf emulation.
AST-362
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277250 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_sockaddr_stringiy_fmt (which is call by all ast_sockaddr_stringify* functions)
uses thread-local storage for storing the string that it creates. In cases where
ast_sockaddr_stringify_fmt was being called twice within the same statement, the
result of one call would be overwritten by the result of the other call. This
usually was happening in printf-like statements and was resulting in the same
stringified addressed being printed twice instead of two separate addresses.
I have fixed this by using ast_strdupa on the result of stringify functions if
they are used twice within the same statement. As far as I could tell, there were
no instances where a pointer to the result of such a call were saved anywhere, so
this is the only situation I could see where this error could occur.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276570 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The purpose of this patch is to eliminate struct ast_callerid since it has
turned into a miscellaneous collection of various party information.
Eliminate struct ast_callerid and replace it with the following struct
organization:
struct ast_party_name {
char *str;
int char_set;
int presentation;
unsigned char valid;
};
struct ast_party_number {
char *str;
int plan;
int presentation;
unsigned char valid;
};
struct ast_party_subaddress {
char *str;
int type;
unsigned char odd_even_indicator;
unsigned char valid;
};
struct ast_party_id {
struct ast_party_name name;
struct ast_party_number number;
struct ast_party_subaddress subaddress;
char *tag;
};
struct ast_party_dialed {
struct {
char *str;
int plan;
} number;
struct ast_party_subaddress subaddress;
int transit_network_select;
};
struct ast_party_caller {
struct ast_party_id id;
char *ani;
int ani2;
};
The new organization adds some new information as well.
* The party name and number now have their own presentation value that can
be manipulated independently. ISDN supplies the presentation value for
the name and number at different times with the possibility that they
could be different.
* The party name and number now have a valid flag. Before this change the
name or number string could be empty if the presentation were restricted.
Most channel drivers assume that the name or number is then simply not
available instead of indicating that the name or number was restricted.
* The party name now has a character set value. SIP and Q.SIG have the
ability to indicate what character set a name string is using so it could
be presented properly.
* The dialed party now has a numbering plan value that could be useful to
have available.
The various channel drivers will need to be updated to support the new
core features as needed. They have simply been converted to supply
current functionality at this time.
The following items of note were either corrected or enhanced:
* The CONNECTEDLINE() and REDIRECTING() dialplan functions were
consolidated into func_callerid.c to share party id handling code.
* CALLERPRES() is now deprecated because the name and number have their
own presentation values.
* Fixed app_alarmreceiver.c write_metadata(). The workstring[] could
contain garbage. It also can only contain the caller id number so using
ast_callerid_parse() on it is silly. There was also a typo in the
CALLERNAME if test.
* Fixed app_rpt.c using ast_callerid_parse() on the channel's caller id
number string. ast_callerid_parse() alters the given buffer which in this
case is the channel's caller id number string. Then using
ast_shrink_phone_number() could alter it even more.
* Fixed caller ID name and number memory leak in chan_usbradio.c.
* Fixed uninitialized char arrays cid_num[] and cid_name[] in
sig_analog.c.
* Protected access to a caller channel with lock in chan_sip.c.
* Clarified intent of code in app_meetme.c sla_ring_station() and
dial_trunk(). Also made save all caller ID data instead of just the name
and number strings.
* Simplified cdr.c set_one_cid(). It hand coded the ast_callerid_merge()
function.
* Corrected some weirdness with app_privacy.c's use of caller
presentation.
Review: https://reviewboard.asterisk.org/r/702/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r275994 | russell | 2010-07-13 11:51:18 -0500 (Tue, 13 Jul 2010) | 14 lines
Access peer->cdr directly instead of through a saved off reference.
At this point in the code, it is possible that peer_cdr may be invalid.
Specifically, in the blind transfer code, CDRs are swapped between channels.
So, peer_cdr is no longer == peer->cdr.
The scenario that exposed a crash in this code was a blind transfer that hit
the system call limit, causing the transferee channel to get destroyed after
the transfer attempt failed. Even if it succeeds and this code doesn't crash,
this code was still trying to reset a CDR on a channel that was now owned by
a different thread, which is a BadThing(tm).
(ABE-2417)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@275995 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r275665 | jpeeler | 2010-07-12 11:58:39 -0500 (Mon, 12 Jul 2010) | 11 lines
Change ast_write to not stop generator when called from ast_prod.
For SIP channels configured with the progressinband option on, the ringback was
being immediately stopped. This problem was due to ast_prod being moved for a
deadlock fix in 259858. Prodding the channel after setting up the generator
triggered the check in ast_write to stop the generator. The fix here should
write the frame the same as was done before the call to ast_prod was moved.
(closes issue #17372)
Reported by: tech_admin
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@275682 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The bridge handling code did not properly consider feature groups when setting
parameters that would affect whether or not a native bridge would be attempted.
If DYNAMIC_FEATURES only include a feature group, a native bridge would occur
that may prevent features from working.
Fix a bug in verbose output that would show the key mapping as empty if it was
using the default mapping and not a custom mapping in the feature group.
Add feature groups to the output of "features show".
Adjust the feature execution logic to match that of the logic when executing
a feature that was not configured through a feature group.
Update features.conf.sample to show that an '=' is still required if using
the default key mapping from [applicationmap].
Finally, clean up a little bit of formatting to better coform to coding
guidelines while in the area.
(closes issue #17589)
Reported by: lmadsen
Patches:
issue_17589.rev4.txt uploaded by russell (license 2)
Tested by: russell, lmadsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@275424 65c4cc65-6c06-0410-ace0-fbb531ad65f3
warning (at least with gcc 4.4.4):
netsock2.c:492: warning: dereferencing pointer ‘({anonymous})’ does break strict-aliasing rules
So we're back to using memcpy()...
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274909 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a generic API for accommodating IPv6 and IPv4 addresses
within Asterisk. While many files have been updated to make use of the
API, chan_sip and the RTP code are the files which actually support
IPv6 addresses at the time of this commit. The way has been paved for
easier upgrading for other files in the near future, though.
Big thanks go to Simon Perrault, Marc Blanchet, and Jean-Philippe Dionne
for their hard work on this.
(closes issue #17565)
Reported by: russell
Patches:
asteriskv6-test-report.pdf uploaded by russell (license 2)
Review: https://reviewboard.asterisk.org/r/743
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r273565 | russell | 2010-07-01 17:09:19 -0500 (Thu, 01 Jul 2010) | 7 lines
Don't return a partially initialized datastore.
If memory allocation fails in ast_strdup(), don't return a partially
initialized datastore. Bad things may happen.
(related to ABE-2415)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@273566 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Otherwise, it goes to all manager sessions and may exclude the current session,
if the Events mask excludes it.
(closes issue #17504)
Reported by: rrb3942
Patches:
showdialplan_patch.diff uploaded by rrb3942 (license 1003)
Tested by: rrb3942
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@273054 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes a ref count leak in event filters and checks for
a filter container allocation failure during session creation.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271905 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch as documented in the sample config allows one to optionally apply
white, black, or both types of filtering to manager events. The new
'eventfilter' option is set per user.
(closes issue #14861)
Reported by: fnordian
Patches:
eventfilter3.patch uploaded by fnordian (license 110),
modified by me
Review: https://reviewboard.asterisk.org/r/673/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If both the transferer and transferee of a attended transfer hangup before
the new channel picks up, the new channel should be hung up as well as it
has no endpoint to talk to. This mirrors the expected behavior used in 1.4.
(closes issue #17444)
Reported by: corruptor
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271831 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If there is a problem with a firmware file, Polycom phones will close the
connection. We were continuing to send the file anyway. There should be no
reason to continue sending a file if there is an error writing it.
(closes issue #16682)
Reported by: lmadsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@270692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r269821 | mmichelson | 2010-06-10 14:30:12 -0500 (Thu, 10 Jun 2010) | 19 lines
Fix potential crash when writing raw SLIN audio on a PLC-enabled channel.
The issue here was that the frame created when adjusting for PLC had no offset
to its audio data. If this frame were translated to another format prior to
being sent out an RTP socket, all went well because the translation code would
put an appropriate offset into the frame. However, if the SLIN audio were not
translated before being sent out the RTP socket, bad things would happen.
Specifically, the ast_rtp_raw_write makes the assumption that the frame has
at least enough of an offset that it can accommodate an RTP header. This was
not the case. As such, data was being written prior to the allocation, likely
corrupting the data the memory allocator had written. Thus when the time came
to free the data, all hell broke loose. ....Well, Asterisk crashed at least.
The fix was just what one would expect. Offset the data in the frame by a reasonable
amount. The method I used is a bit odd since the data in the frame is 16 bit integers
and not bytes. I left a big ol' comment about it. This can be improved on if someone
is interested. I was more interested in getting the crash resolved.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@269822 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Valgrind pointed out that attempting to get an IE value from an event that has
no IEs produces an invalid memory read past the end of the event. Thanks to
mmichelson for pointing the problem out to me and then testing the fix.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@269417 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r269334 | pabelanger | 2010-06-09 13:24:53 -0400 (Wed, 09 Jun 2010) | 12 lines
Fix Debian init script to not use -c.
When using the init script as-is currently, it could cause issues on Debian
such as high CPU usage. This fix has worked for several people so I'm
implementing the change. We now handle color displays properly.
(closes issue #16784)
Reported by: pabelanger
Patches:
20100530__issue16784__2.diff.txt uploaded by tilghman (license 14)
Tested by: pabelanger, tilghman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@269346 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After 5 years in mantis and over a year on reviewboard, SRTP support is finally
being comitted. This includes generic CHANNEL dialplan functions that work for
getting the status of whether a call has secure media or signaling as defined
by the underlying channel technology and for setting whether or not a new
channel being bridged to a calling channel should have secure signaling or
media. See doc/tex/secure-calls.tex for examples.
Original patch by mikma, updated for trunk and revised by me.
(closes issue #5413)
Reported by: mikma
Tested by: twilson, notthematrix, hemanshurpatel
Review: https://reviewboard.asterisk.org/r/191/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268894 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Suppress the warning about unexpected control subclass frames for
AST_CONTROL_CONNECTED_LINE, AST_CONTROL_REDIRECTING, and AST_CONTROL_AOC
in file.c:waitstream_core().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268578 65c4cc65-6c06-0410-ace0-fbb531ad65f3
What I did not originally see in my previous commit was that even though the
next digit could be detected before the previous was considered ended, the
detection of the next digit effectively ends the detection of the previous.
Therefore, the length moves in lockstep with the digit, and no separate counter
is needed for the length alone.
(closes issue #17371)
Reported by: alecdavis
(closes issue #17474)
Reported by: kenner
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268456 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ASTCFLAGS was specified with the make command, Makefile.rules was using
the specified value from the command line and not the one here, making it so this
flag would go missing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267303 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk Generic AOC Representation
- Generic AOC encode/decode routines.
(Generic AOC must be encoded to be passed on the wire in the AST_CONTROL_AOC frame)
- AST_CONTROL_AOC frame type to represent generic encoded AOC data
- Manager events for AOC-S, AOC-D, and AOC-E messages
Asterisk App Support
- app_dial AOC-S pass-through support on call setup
- app_queue AOC-S pass-through support on call setup
AOC Unit Tests
- AOC Unit Tests for encode/decode routines
- AOC Unit Test for manager event representation.
SIP AOC Support
- Pass-through of generic AOC-D and AOC-E messages to snom phones via the
snom AOC specification.
- Creation of chan_sip page3 flags for the addition of the new
'snom_aoc_enabled' sip.conf option.
IAX AOC Support
- Natively supports AOC pass-through through the use of the new
AST_CONTROL_AOC frame type
DAHDI AOC Support
- ETSI PRI full AOC Pass-through support
- 'aoc_enable' chan_dahdi.conf option for independently enabling
pass-through of AOC-S, AOC-D, AOC-E.
- 'aoce_delayhangup' option for retrieving AOC-E on disconnect.
- DAHDI A() dial string option for requesting AOC services.
example usage:
;requests AOC-S, AOC-D, and AOC-E on call setup
exten=>1111,1,Dial(DAHDI/g1/1112/A(s,d,e))
Review: https://reviewboard.asterisk.org/r/552/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267096 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Actions (or failures to act) by external clients should not cause memory leaks
in Asterisk, especially when those continued leaks could cause Asterisk to
misbehave later.
(closes issue #17234)
Reported by: mav3rick
Patches:
20100510__issue17234.diff.txt uploaded by tilghman (license 14)
20100517__issue17234__trunk.diff.txt uploaded by tilghman (license 14)
Tested by: mav3rick, davidw
(closes issue #17365)
Reported by: davidw
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266682 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r266585 | tilghman | 2010-06-01 10:17:46 -0500 (Tue, 01 Jun 2010) | 11 lines
Prevent CLI prompt from distorting output of lines shorter than the prompt.
Uses the VT100 method of clearing the line from the cursor position to the
end of the line: Esc-0K
(closes issue #17160)
Reported by: coolmig
Patches:
20100531__issue17160.diff.txt uploaded by tilghman (license 14)
Tested by: coolmig
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266592 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r266142 | tilghman | 2010-05-26 16:11:44 -0500 (Wed, 26 May 2010) | 14 lines
Use sigaction for signals which should persist past the initial trigger, not signal.
If you call signal() in a Solaris signal handler, instead of just resetting
the signal handler, it causes the signal to refire, because the signal is not
marked as handled prior to the signal handler being called. This effectively
causes Solaris to immediately exceed the threadstack in recursive signal
handlers and crash.
(closes issue #17000)
Reported by: rmcgilvr
Patches:
20100526__issue17000.diff.txt uploaded by tilghman (license 14)
Tested by: rmcgilvr
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266146 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch breaks up every part of the sip registry string during
config parsing and removes all parsing from transmit_register().
Thanks to Nick_Lewis for contributing this patch!
(closes issue #14331)
Reported by: Nick_Lewis
Patches:
chan_sip.c-domparse.patch uploaded by Nick Lewis (license 657)
chan_sip.c.patch uploaded by Nick Lewis (license 657)
chan_sip.c.domainparse3.patch uploaded by Nick Lewis (license 657)
chan_sip.c-domparse4.patch uploaded by Nick Lewis (license 657)
chan_sip.c-domparse5.patch uploaded by Nick Lewis (license 657)
nicklewispatch.diff uploaded by dvossel (license 671)
Tested by: Nick_Lewis, dvossel
Review: https://reviewboard.asterisk.org/r/628/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266090 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The handling of the control subclass AST_CONTROL_READ_ACTION frame leaked
connected line string memory in __ast_read().
Also in __ast_read() the frame type switch should not have had a case for
AST_CONTROL_READ_ACTION. AST_CONTROL_READ_ACTION is not a frame type.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265608 65c4cc65-6c06-0410-ace0-fbb531ad65f3
__ast_channel_alloc_ap() has several points in the initialization of a new
channel structure where it could fail. Since the channel structure is now
an ao2 object, the destructor callback needs to be able to handle clean up
when the structure setup is incomplete.
Problems corrected:
1) Failing to setup the alertpipe would not unreference the structure but
free it directly. Doing this to an ao2_object is very bad.
2) File descriptors need to be initialized to -1 before a construction
failure could occur so the destructor will not close unopened descriptors.
3) The destructor needs to check that the string field has been
initialized before using any string field values. Crashes expected.
4) The destructor should not notify devstate if the device name is empty.
It is a waste of cycles and a couple ERROR log messages are generated.
Review: https://reviewboard.asterisk.org/r/675/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r264996 | mmichelson | 2010-05-21 11:28:34 -0500 (Fri, 21 May 2010) | 32 lines
Allow ast_safe_sleep to defer specific frames until after the sleep has concluded.
From reviewboard
Background:
A Digium customer discovered a somewhat odd bug. The setup is that parties A
and B are bridged, and party A places party B on hold. While party B is
listening to hold music, he mashes a bunch of DTMF. Party A takes party
B off hold while this is happening, but party B continues to hear hold
music. I could reproduce this about 1 in 5 times.
The issue:
When DTMF features are enabled and a user presses keys, the channel that
the DTMF is streamed to is placed in an ast_safe_sleep for 100 ms, the
duration of the emulated tone. If an AST_CONTROL_UNHOLD frame is read
from the channel during the sleep, the frame is dropped. Thus the
unhold indication is never made to the channel that was originally placed
on hold.
The fix:
Originally, I discussed with Kevin possible ways of fixing the specific
problem reported. However, we determined that the same type of problem
could happen in other situations where ast_safe_sleep() is used. Using
autoservice as a model, I modified ast_safe_sleep_conditional() to
defer specific frame types so they can be re-queued once the sleep has
finished. I made a common function for determining if a frame should
be deferred so that there are not two identical switch blocks to
maintain.
Review: https://reviewboard.asterisk.org/r/674/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r264820 | rmudgett | 2010-05-20 18:23:21 -0500 (Thu, 20 May 2010) | 6 lines
ast_callerid_parse() had a path that left name uninitialized.
Several callers of ast_callerid_parse() do not initialize the name
parameter before calling thus there is the potential to use an
uninitialized pointer.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264828 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Tim Ringenbach
Tilghman Lesher
Matthew Nicholson
Sean Bright
Olle Johansson
Jeff Peeler
Mark Michelson
Kevin P. Fleming
Richard Mudgett
Russell Bryant
Eliel C. Sardanons
Paul Belanger
Tzafrir Cohen
David Vossel
Terry Wilson
Leif Madsen