This change permits each verbose destination (consoles, logger) to have its
own concept of what the verbosity level is. The big feature here is that
the logger will now be able to capture a particular verbosity level without
condemning each console to need to suffer that level of verbosity.
Additionally, a stray 'core set verbose' will no longer change what will go
to the log.
Review: https://reviewboard.asterisk.org/r/1599/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a variable AGIEXITONHANGUP for res_agi. If this variable is
set to "yes" on a channel, AGI() will exit immediately once a channel hangup
has been detected. This was the behavior of AGI() in Asterisk 1.4 and earlier
and is still desired by some people.
Review: https://reviewboard.asterisk.org/r/1734/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355102 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the auto_force_rport and auto_comedia NAT options. It
also converts the nat= setting to a list of comma-separated combinable
options: no, force_rport, comedia, auto_force_rport, and auto_comedia.
nat=yes remains as an undocumented option equal to
"force_rport,comedia". The first instance of 'yes' or 'no' in the list
stops parsing and overrides any previously set options. If an auto_*
option is specified with its non-auto_ counterpart, the auto setting
takes precedence.
This patch builds upon the patch posted to ASTERISK-17860 by JIRA user
pedro-garcia.
(closes issue ASTERISK-17860)
Review: https://reviewboard.asterisk.org/r/1698/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354597 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is based on the one by David Vossel, developer extrodinaire, at
https://reviewboard.asterisk.org/r/344/. If multiple peers are defined with the
same host/port, but differing callbackextensions, it chooses the peer with the
matching callbackextension. Since callbackextension creates an outbound
registration with the callbackextension as the Contact address, matching an
incoming request by that (in addition to the host/port) makes a lot of sense.
This patch also adds support for callbackextension to realtime by querying all
peers with callbackextensions on reload and adding registrations for them.
(closes issue ASTERISK-13456)
Review: https://reviewboard.asterisk.org/r/344/
Review: https://reviewboard.asterisk.org/r/1717/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354458 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch removes res_ais and introduces a new module, res_corosync.
The OpenAIS project is deprecated and is now just a wrapper around
Corosync. This module provides the same functionality using the same
core infrastructure, but without the use of the deprecated components.
Technically res_ais could have been used with an AIS implementation other
than OpenAIS, but that is the only one I know of that was ever used.
Review: https://reviewboard.asterisk.org/r/1700/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354046 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk is used with various third-party libraries (CURL, PostgresSQL,
many others) that have the ability themselves to use OpenSSL, it is possible
for conflicts to arise in how the OpenSSL libraries are initialized and
shutdown. This patch addresses these conflicts by 'wrapping' the important
functions from the OpenSSL libraries in a new shared library that is part
of Asterisk itself, and is loaded in such a way as to ensure that *all*
calls to these functions will be dispatched through the Asterisk wrapper
functions, not the native functions.
This new library is optional, but enabled by default. See the CHANGES file
for documentation on how to disable it.
Along the way, this patch also makes a few other minor changes:
* Changes MODULES_DIR to ASTMODDIR throughout the build system, in order to
more closely match what is used during run-time configuration.
* Corrects some errors in the configure script where AC_CHECK_TOOLS was used
instead of AC_PATH_PROG.
* Adds a new variable for linker flags in the build system (DYLINK), used for
producing true shared libraries (as opposed to the dynamically loadable
modules that the build system produces for 'regular' Asterisk modules).
* Moves the Makefile bits that handle installation and uninstallation of the
main Asterisk binary into main/Makefile from the top-level Makefile.
* Moves a couple of useful preprocessor macros from optional_api.h to
asterisk.h.
Review: https://reviewboard.asterisk.org/r/1006/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix authenticate MESSAGE losing custom headers added by the MESSAGE_DATA
function in the authorization attempt.
* Pass up better From header contents for SIP to use. Now is in the
"display-name" <URI> format expected by MessageSend. (Note that this is a
behavior change that could concievably affect some people.)
* Block user from adding standard headers that are added automatically.
(To, From,...)
* Allow the user to override the Content-Type header contents sent by
MessageSend.
* Decrement Max-Forwards header if the user transferred it from an
incoming message.
* Expand SIP short header names so the dialplan and other code only has to
deal with the full names.
* Documents what SIP expects in the MessageSend(from) parameter.
(closes issue ASTERISK-18992)
Reported by: Yuri
(closes issue ASTERISK-18917)
Reported by: Shaun Clark
Review: https://reviewboard.asterisk.org/r/1683/
........
Merged revisions 352520 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352538 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a feature patch which allows an 'announcement' option to be specified in
musiconhold.conf which should be set to the name of a sound. If a valid sound is
specified for this option, then it will be played on that music on hold class whenever
a channel bound to that class is put on hold as well as when Asterisk is able to detect
that a song has ended before starting the next song (excludes external players).
(closes ASTERISK-18977)
Reported by: Timo Teräs
Patches:
asterisk-moh-announcement.diff uploaded by Timo Teräs (license 5409)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352134 65c4cc65-6c06-0410-ace0-fbb531ad65f3
MixMonitor receives a new option i(channel_variable) which stores the unique id at said
variable. StopMixMonitor now accepts ID as an optional argument, which if included will
make StopMixMonitor specifically target the mixmonitor on that particular channel. CLI
commands and AMI actions have been ammended to work with the IDs as well. In addition,
monitors across a channel can now be listed be listed via CLI command "mixmonitor list
<channel>" which will display all of the mixmonitors active on that channel along with
the files they each have open. Created by Sergio González Martín.
(closes issue ASTERISK-19096)
Reported by: Sergio González Martín
Review: https://reviewboard.asterisk.org/r/1643/
Review: https://reviewboard.asterisk.org/r/1682/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352093 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Adds per-parking lot options comebackcontext and comebackdialtime
* Makes comebacktoorigin settable per parking lot
* Sets a PARKER channel variable when comebacktoorigin is disabled
(closes issue ASTERISK-16643)
Reported by: Mitch Sharp (bluecrow76)
Patches:
asterisk-1.6.2.17.2-park-features-comebackcontext-consolidated-v3.diff by Mitch Sharp (bluecrow76) license 5231
with updates by me.
Review: https://reviewboard.asterisk.org/r/1674
Review: https://reviewboard.asterisk.org/r/963
Reviewed by Richard Mudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@351913 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to better handle RTP sources with strictrtp enabled (which is now default in 10)
using the learning mode to figure out new sources when they change is handled by checking
for a number of consecutive (by sequence number) packets received to an rtp struct
based on a new configurable value called 'probation'. Also, during learning mode instead
of liberally accepting all packets received, we now reject packets until a clear source
has been determined.
Review: https://reviewboard.asterisk.org/r/1663/
........
Merged revisions 351287 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 351289 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@351290 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows the imapserver, imapport, and imapflags settings to be
overridden for any voicemail user. It also documents the settings in
the sample voicemail.conf file, and updates the voicemail schema to
allow storage of those columns.
(closes issue ASTERISK-16489)
Reporter: Hubert Mickael
Tested by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1614/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch moves destruction of sip peers to immediately after the general section of
sip.conf is read so that autocreatepeer setting can be read before deletion of peers.
If autocreatepeer=persist at reload, then peers created by the autocreatepeer setting
will be skipped when purging the current SIP peer list.
(closes ASTERISK-16508)
Reported by: Kirill Katsnelson
Patches:
017797-kkm-persist-autopeers-1.8.patch uploaded by Kirill Katsnelson (license 5845)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349097 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to check the availability of the caller's name, app_voicemail will check for an
audio file in <astspooldir>/recordings/callerids/
This change sets a precedent for where to put recordings of names. Currently the idea is
that recordings here could also be used for applications like confbridge and meetme to
find recorded names in this folder from callerid (when another recording isn't available)
(closes issue ASTERISK-18565)
Reporter: Russell Brown
Patches:
r uploaded by Russel Brown (license 6182)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@348416 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During testing, it was discovered that there were a number of side effects
introduced by r346391 and subsequent check-ins related to it (r346429,
r346617, and r346655). This included the /main/stdtime/ test 'hanging',
as well as the remote console option failing to receive the appropriate output
after a period of time.
I only backed out the changes to main/ and utils/, as this was adequate
to reverse the behavior experienced.
(issue ASTERISK-18974)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a caller sends DTMF while the SayUnixTime application is saying the time, The call
would jump to the next extension much like it does during Background(). This patch adds
option 'j' to SayUnixTime which when used employs the old behavior. Also, this patch
allows arguments to sayunixtime to not be used as empty strings in the case of something
like 'sayunixtime(,,,j)' or 'sayunixtime(,,pattern).
(closes issue ASTERISK-16675)
Reported by: jlpedrosa
Patches:
patch_SayUnixTime_noJump.patch uploaded by jlpedrosa (license 5959)
Review: https://reviewboard.asterisk.org/r/956/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347866 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds two new menu features to app_confbridge, admin_toggle_menu_
participants and participant_count. The admin action will globally mute /
unmute all non-admin participants on a converence, while the participant
count simply exposes the existing participant count function to the
conference bridge menu.
This also adds configuration options to change the sound played when the
conference is globally muted / unmuted, as well as the necessary config
hooks to place these functions in the DTMF menus.
(closes issue ASTERISK-18204)
Reported by: Kevin Reeves
Tested by: Matt Jordan
Patches:
app_confbridge.c.patch.txt, conf_config_parser.c.patch.txt,
confbridge.h.patch.txt uploaded by Kevin Reeves (license 6281)
Review: https://reviewboard.asterisk.org/r/1518/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@345560 65c4cc65-6c06-0410-ace0-fbb531ad65f3
You can now use the built in variables , , and
within a dynamic weight. For example, this could be useful when you want
to pass requested lookup number to the SHELL() function which could be
used to execute a script to dynamically set the weight of the result.
(Closes issue ASTERISK-13657)
Reported by: Joel Vandal
Tested by: Leif Madsen, Russell Bryant
Patches:
asterisk-1.6-dundi-varhead.patch uploaded by Joel Vandal (License #5374)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@343693 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r341580 | irroot | 2011-10-20 19:13:23 +0200 (Thu, 20 Oct 2011) | 15 lines
Add option to check state when state is unknown
r341486 reverts r325483 this is a rework of the patch.
optimize to minimize load.
add option check_state_unknown to control whether a member with unknown
device state is checked there is a small % chance that calls will be sent
to the member when they on a call.
app_queue will see a device with unknown state as available and does not
try verify the state without this option enabled.
Review: https://reviewboard.asterisk.org/r/1535/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@341583 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added func FAXOPT(faxdetect)=yes,cng,t38[,timeout]/no
to enable dialplan faxdetect allowing more flexibility.
as soon as a fax tone is detected the framehook is removed.
there is a penalty involved in running this framehook on
non G711 channels as they will be transcoded.
CNG tone is suppresed using the SQUELCH flag to allow
WaitForNoise to be run on the channel to detect Voice.
(Closes issue ASTERISK-18569)
Reported by: Myself
Reviewed by: Matthew Nicholson, Kevin Fleming
Review: https://reviewboard.asterisk.org/r/1116/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339465 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r337595 | jrose | 2011-09-22 10:35:50 -0500 (Thu, 22 Sep 2011) | 12 lines
Generate Security events in chan_sip using new Security Events Framework
Security Events Framework was added in 1.8 and support was added for AMI to generate
events at that time. This patch adds support for chan_sip to generate security events.
(closes issue ASTERISK-18264)
Reported by: Michael L. Young
Patches:
security_events_chan_sip_v4.patch (license #5026) by Michael L. Young
Review: https://reviewboard.asterisk.org/r/1362/
........
r337597 | jrose | 2011-09-22 10:47:05 -0500 (Thu, 22 Sep 2011) | 10 lines
Forgot to svn add new files to r337595
Part of Generating security events for chan_sip
(issue ASTERISK-18264)
Reported by: Michael L. Young
Patches:
security_events_chan_sip_v4.patch (License #5026) by Michael L. Young
Reviewboard: https://reviewboard.asterisk.org/r/1362/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337600 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r337219 | oej | 2011-09-21 11:32:50 +0200 (Ons, 21 Sep 2011) | 13 lines
Make ast_pbx_run() not default to s@default if extension is not found
Review: https://reviewboard.asterisk.org/r/1446/
This is a bug - or architecture mistake - that has been in Asterisk for a
very long time. It was exposed by the AMI originate action and possibly
some other applications. Most channel drivers checks if an extension
exists BEFORE starting a pbx on an inbound call, so most calls will
not depend on this issue.
Thanks everyone involved in the review and on IRC and the mailing list
for a quick review and all the feedback.
(closes issue ASTERISK-18578)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337220 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r337178 | oej | 2011-09-21 10:51:41 +0200 (Ons, 21 Sep 2011) | 14 lines
Change strictrtp option to default to yes in the RTP module
Suggested by Kapejod on Facebook
Review: https://reviewboard.asterisk.org/r/1448/
(closes issue ASTERISK-18587)
Thanks for quick feedback to kpfleming and Tilghman
--Denna och nedanstående rader kommer inte med i loggmeddelandet--
M CHANGES
M configs/rtp.conf.sample
M res/res_rtp_asterisk.c
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337179 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r336936 | irroot | 2011-09-20 18:51:59 +0200 (Tue, 20 Sep 2011) | 14 lines
Allow Setting Auth Tag Bit length Based on invite or config option
Update the SIP SRTP API to allow use of 32 or 80 bit taglen.
Curently only 80 bit is supported.
The outgoing invite will use the taglen of the incoming invite preventing
one-way audio.
(Closes issue ASTERISK-17895)
Review: https://reviewboard.asterisk.org/r/1173/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@336937 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r336042 | oej | 2011-09-15 14:46:38 +0200 (Tor, 15 Sep 2011) | 12 lines
Meetme: Introducing a new option "k" to kill a conference if there's only a single member left.
When using Meetme as a modular call bridge from third party applications, it's handy to make
it behave like a normal call bridge. When the second to last person exists, the last person
will be kicked out of the conference when this option is enabled.
(closes issue ASTERISK-18234)
Review: https://reviewboard.asterisk.org/r/1376/
Patch by oej, sponsored by ClearIT, Solna, Sweden
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@336043 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This permits the list of codecs to be specified in one configuration line,
instead of two or more, generally with the aim of either allowing all codecs
with the exception of a few or disallowing most but permitting a few.
Review: https://reviewboard.asterisk.org/r/1411/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@334574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a CDR option to cdr.conf that will allow CDR files to log calls ending
with congestion in a way that is unique from other unanswered calls.
(closes issue ASTERISK-14842)
Reported by: Alec Davis
Patches:
cdr_congestion.diff.txt (License #5546) patch uploaded by Alec Davis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332760 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r332101 | rmudgett | 2011-08-16 12:17:28 -0500 (Tue, 16 Aug 2011) | 140 lines
Merged revisions 332100 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332100 | rmudgett | 2011-08-16 11:31:36 -0500 (Tue, 16 Aug 2011) | 133 lines
Fix multiple parking issues.
JIRA ASTERISK-17183
Multi-parkinglot directs calls to wrong parkinglot.
JIRA ASTERISK-17870
Cannot retrieve parked calls.
JIRA ASTERISK-17430
ParkedCall() with no extension should pickup first available call and does not.
JIRA AST-576
Issues with parking lots
* Removed searching for parking lots by extension. Parking lots can only
be found by the parking lot name since parking lot access extensions and
spaces are not guaranteed to be unique.
* Added parking_lot_name option to the Park and ParkedCall applications.
Updated documentation for Park and ParkedCall applications.
* Add parkext_exclusive configuration option to make parking entry
extensions specify which parking lot they access.
(closes issue ASTERISK-17183)
Reported by: David Cabrejos
Tested by: rmudgett, David Cabrejos
(closes issue ASTERISK-17870)
Reported by: Remi Quezada
(closes issue ASTERISK-17430)
Reported by: Philippe Lindheimer
JIRA ASTERISK-17452
Parking_offset not used
JIRA AST-624
'next' setting for findslot does nothing
* Reimplemented since findslot feature option broken by -r114655.
(closes issue ASTERISK-17452)
Reported by: David Woolley
Tested by: rmudgett
JIRA ASTERISK-15792
Dialplan continues execution after transfer to park.
This happens for DTMF attended transfer, DTMF blind transfer, and DTMF
one-touch-parking if the party initiating these features also initiated
the call.
* Fixed the return code from the affected builtin features when parking a
call.
(closes issue ASTERISK-15792)
Reported by: Mat Murdock
Tested by: rmudgett, twilson
JIRA AST-607
The courtesytone is not playing to the expected call when picking up a
parked call.
This is mostly a documentation problem. However, the option is not reset
to the default when features.conf is reloaded.
* Updated features.conf.sample documentation for courtesytone and
parkedplay options.
* Reset the parkedplay option to default when features.conf is reloaded.
JIRA AST-615
AMI Park action followed by features reload results in orphaned channels
in parking lot.
* Reloading features.conf will not touch parking lots that have calls
still parked in them. Reload again at a later time.
Misc additional fixes:
* Added unit test for parking lot dialplan usage checking.
* Made update connected line when a parked call is retrieved from a
parking lot.
* Made retrieved parked call stop ringing or MOH depending upon how the
call was waiting in the parking lot.
* Made CLI "features show" indicate if the parking lot is enabled for use.
* Added PARKINGDYNEXTEN channel variable to allow dynamic parking lots to
specify the parking lot access extension.
* Made AMI ParkedCalls action ParkedCall events have a Parkinglot header.
* Made AMI ParkedCalls action ParkedCallsComplete event have a Total
header.
* Fixed potential deadlock from AMI Park action holding channel locks
while calling masq_park_call().
* Fixed several places where ast_strdupa() were used inside of loops.
(Mostly fixed by refactoring the loop body into its own function.)
* Fixed copy_parkinglot() copying too much from the source parking lot.
Extracted the parking lot configuration settings into struct
parkinglot_cfg.
* Refactored courtesytone playing code to put the channel not playing the
tone in autoservice.
* Fix when pbx-parkingfailed is played that the other channel is put in
autoservice if it exists.
* Fixed parkinglot reference leak in parked_call_exec() error paths.
* Fixed parkinglot_unref() use of parkinglot after it was unreffed.
* Made destroy the struct ast_parkinglot parkings lock when done.
* Refactored the features.conf parking lot configuration code to eliminate
redundancy.
* Fixed feature reload to better protect parking lots.
* Fixed parking lot container reference leak in handle_parkedcalls().
* Fixed the total count in handle_parkedcalls().
Review: https://reviewboard.asterisk.org/r/1358/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332117 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r332022 | mnicholson | 2011-08-16 09:40:37 -0500 (Tue, 16 Aug 2011) | 16 lines
In 10 and trunk this option is disabled by default.
Merged revisions 332021 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332021 | mnicholson | 2011-08-16 09:20:43 -0500 (Tue, 16 Aug 2011) | 7 lines
Added the 'storesipcause' option to sip.conf to allow the user to disable the
setting of HASH(SIP_CAUSE,<chan name>) on the channel.
Having chan_sip set HASH(SIP_CAUSE,<chan name>) on the channel carries a
significant performance penalty because of the usage of the MASTER_CHANNEL()
dialplan function.
AST-580
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332023 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to address a compatability issue with certain features on certain devices
which rely on display name content to change behavior, initreqprep in chan_sip.c
has been changed to no longer substitute cid_number into the display name when
cid_name isn't present. Instead, it will send no display name in that case.
(closes issue ASTERISK-16198)
Reported by: Walter Doekes
Review: https://reviewboard.asterisk.org/r/1341/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331371 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r331097 | twilson | 2011-08-08 17:59:01 -0500 (Mon, 08 Aug 2011) | 5 lines
Bump the AMI protocol version to 1.2
As a result of converting Unlink events that were missed in the AMI
1.1 update to Bridge events, the AMI protocol version is being incremented.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331098 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r331041 | twilson | 2011-08-08 16:12:51 -0500 (Mon, 08 Aug 2011) | 6 lines
Replace AMI Unlink events with Bridge events
A previous update converted some of the Link and Unlink events to
Bridge events, but a couple of Unlink events were missed. This patch
rectifies the situation.
(closes issues ASTERISK-17455)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were some bugs in the very ancient version of Berkeley DB that Asterisk
used. Instead of spending the time tracking down the bugs in the Berkeley code
we move to the much better documented SQLite 3.
Conversion of the old astdb happens at runtime by running the included
astdb2sqlite3 utility. The ast_db API with SQLite 3 backend should behave
identically to the old Berkeley backend, but in the future we could offer a
much more robust interface.
We do not include the SQLite 3 library in the source tree, but instead rely
upon the distribution-provided libraries. SQLite is so ubiquitous that this
should not place undue burden on administrators.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a new action, FilterAdd to the manager interface that allows control over event filters for the current session
(closes issue ASTERISK-16795)
Reported by: kobaz
Tested by: kobaz,loloski
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326267 65c4cc65-6c06-0410-ace0-fbb531ad65f3
terminal). Can be enabled on a channel by setting FAXOPT(gateway)=yes in the
dialplan.
Big thanks to irroot for porting this code to use the framehooks api.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@325816 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk now has protocol independent support for processing text messages
outside of a call. Messages are routed through the Asterisk dialplan.
SIP MESSAGE and XMPP are currently supported. There are options in sip.conf
and jabber.conf that enable these features.
There is a new application, MessageSend(). There are two new functions,
MESSAGE() and MESSAGE_DATA(). Documentation will be available on
the project wiki, wiki.asterisk.org.
Thanks to Terry Wilson for the assistance with development and to David Vossel
for helping with some additional testing.
Review: https://reviewboard.asterisk.org/r/1042/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321330 | rmudgett | 2011-05-27 16:31:25 -0500 (Fri, 27 May 2011) | 8 lines
The app_privacy args have undocumented "options" position, interferes with "context" position.
* Add documention for unused "options" position to match existing code.
The trunk(v1.10) version will remove the unused options position.
(closes issue #19273)
Reported by: mdavenport
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321331 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r320823 | rmudgett | 2011-05-25 12:06:38 -0500 (Wed, 25 May 2011) | 18 lines
The AMI Newstate event contains different information between v1.4 and v1.8.
The addition of connected line support in v1.8 changes the behavior of the
channel caller ID somewhat. The channel caller ID value no longer time
shares with the connected line ID on outgoing call legs. The timing of
some AMI events/responses output the connected line ID as caller ID.
These party ID's are now separate.
* The ConnectedLineNum and ConnectedLineName headers were added to many
AMI events/responses if the CallerIDNum/CallerIDName headers were also
present.
(closes issue #18252)
Reported by: gje
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1227/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@320825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r320650 | rmudgett | 2011-05-23 12:53:44 -0500 (Mon, 23 May 2011) | 16 lines
Add ConnectedLineNum/Name headers to output of AMI action Status.
* Add ConnectedLineNum and ConnectedLineName headers to the output of the
AMI action Status. This makes it easier to find out who the channel is
connected to without having to lookup BridgedChannel or when they are
connected to an application (e.g.: VoiceMail) which has no bridged
channel.
* Bridged channels with no CallerID had "" instead of "<unknown>" output,
that might be a bug as "<unknown>" was what older versions used.
(closes issue #18158)
Reported by: gareth
Patches:
svn-292308.diff uploaded by gareth (license 208)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@320651 65c4cc65-6c06-0410-ace0-fbb531ad65f3
state of the channel reverts to unknown this should be rejected.
this is important for negotiating T.38 gateway see #13405
This patch adds a option T38_REJECTED that behaves as T38_DISABLED except it reports state rejected.
Trivial Change to res_fax to honnor UNAVAILABLE and REJECTED states.
(closes issue #18889)
Reported by: irroot
Tested by: irroot, darkbasic, mnicholson
Review: https://reviewboard.asterisk.org/r/1115
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319087 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This code will actually detect any dialplan jump from any application that
calls ast_explicit_goto(). This change is only being done in trunk as it may
change the way some dialplans execute.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317721 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original implementation of this did the merging of all contexts with the
same name in the realtime layer, but that implementation severely breaks
drivers which use the same context name (e.g. iax.conf, type={peer,user}).
Therefore, the implementation needs to do the merging for particular entries
only, based upon what contexts would allow that in the channel driver itself.
This implementation is for chan_sip only, but others could be added in the
future.
(closes issue #17957)
Reported by: marcelloceschia
Patches:
chan-sip_parsing-general_branch162.patch uploaded by marcelloceschia (license 1079)
Tested by: tilghman
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316428 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the user invokes 'dialplan add extension' into a non-existing context, the context will be created
and a message informing the user of the context being created will be issued in cli.
(closes issue #17431)
Reported by: leearcher
Patches:
context_auto_create.diff uploaded by kobaz (license 834)
Tested by: leearcher, kobaz, jrose
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312678 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In chan_dahdi.conf, the user can now use length 4 patterns in addition to the usual length 2 patterns. The s
ntax remains the same and the method used to track the pattern history will only change when using the length
4 patterns.
(closes issue SWP-3250)
Code:
jrose
rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adding the setvar option with variable substitution on the value allows things
like setting the outbound caller id name to the summary of a calendar event,
etc. Values could be chained together as they are appended in order to do some
scripting if necessary.
Review: https://reviewboard.asterisk.org/r/1134/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@309640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
-Functional changes
1. Dynamic global format list build by codecs defined in codecs.conf
2. SILK 8khz, 12khz, 16khz, and 24khz with custom attributes defined in codecs.conf
3. Negotiation of SILK attributes in chan_sip.
4. SPEEX 32khz with translation
5. SLINEAR 8khz, 12khz, 24khz, 32khz, 44.1khz, 48khz, 96khz, 192khz with translation
using codec_resample.c
6. Various changes to RTP code required to properly handle the dynamic format list
and formats with attributes.
7. ConfBridge now dynamically jumps to the best possible sample rate. This allows
for conferences to take advantage of HD audio (Which sounds awesome)
8. Audiohooks are no longer limited to 8khz audio, and most effects have been
updated to take advantage of this such as Volume, DENOISE, PITCH_SHIFT.
9. codec_resample now uses its own code rather than depending on libresample.
-Organizational changes
Global format list is moved from frame.c to format.c
Various format specific functions moved from frame.c to format.c
Review: https://reviewboard.asterisk.org/r/1104/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308582 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From the submitter:
I've added a new manager action to list only the active conferences on an
Asterisk system. It shows the same data displayed when you run a 'meetme list'
on the Asterisk CLI.
(closes issue #17905)
Reported by: rcasas
Patches:
app_meetme.c.patch uploaded by rcasas (license 641)
Review: https://reviewboard.asterisk.org/r/874/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307359 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Pass a MCID request to the bridged channel so the bridged channel can send
it to the network.
The ability to send the MCID request on an ISDN span is enabled with the
new chan_dahdi.conf mcid_send option.
JIRA SWP-2845
JIRA ABE-2736
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306755 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The display ie handling can be controlled independently in the send and
receive directions with the following options:
* Block display text data.
* Use display text in SETUP/CONNECT messages for name.
* Use display text for COLP name updates (FACILITY/NOTIFY as appropriate).
* Pass arbitrary display text during a call. Sent in INFORMATION
messages. Received from any message that the display text was not used as
a name.
If the display options are not set then the options default to legacy
behavior.
The arbitrary display text is exchanged between bridged channels using the
AST_FRAME_TEXT frame type.
To send display text from the dialplan use the SendText() application when
the arbitrary display text option is enabled.
JIRA SWP-2688
JIRA ABE-2693
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306396 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Discussion on #asterisk on 2011-01-19:
(02:07:03 PM) boch: i wonder how to cycle all entries in a tree
(02:07:11 PM) leifmadsen: use While()
(02:07:17 PM) leifmadsen: you need to know the tree structure already though
(02:07:36 PM) boch: what you mean?
(02:09:02 PM) leifmadsen: you need to know the structure prior to looping, because you can't just return the structure from the dialplan
(02:09:43 PM) leifmadsen: the only way I can think of doing that is via something like writing the output of: asterisk -rx "database show" to a file, then looping through that to know the structure of the database and check everything
(02:09:59 PM) leifmadsen: but at that point you're better off just using either a relational database or an external script
(02:10:13 PM) boch: for example i need to know all entries in the tree
(02:10:15 PM) boch: got it
(02:10:20 PM) leifmadsen: exactly
(02:10:22 PM) leifmadsen: that's the problem
(02:10:22 PM) boch: thank you
(02:13:09 PM) mateu: yeah, i'm surprised there isn't something from the dialplan like 'database show family' so one can get all keys in a family to loop over.
(02:15:35 PM) leifmadsen: database shows everything
(02:16:22 PM) mateu: i mean something from the dial plan that mimics 'database show <family>'
(02:16:41 PM) leifmadsen: guess no one has found that important enough to program :)
(02:16:52 PM) leifmadsen: at that point you should probably just use a relational database...
(02:17:10 PM) mateu: i dunno
(02:17:16 PM) mateu: seems pretty basic to me.
(02:17:16 PM) leifmadsen: me either
(02:17:19 PM) leifmadsen: sure does
(02:17:24 PM) leifmadsen: no one has programmed it though
(02:17:28 PM) ***leifmadsen shrugs
(02:17:43 PM) mateu: ok, well at least we know how it currently stands. thanks leifmadsen
(02:28:52 PM) Corydon76-home: leifmadsen: something like HASHKEYS() ?
(02:30:11 PM) leifmadsen: Corydon76-home: ummm, I was thinking more like DUNDI_QUERY() and DUNDI_RESULT()
(02:30:31 PM) leifmadsen: although HASHKEYS() might work
(02:30:58 PM) leifmadsen: actually ya, looking at it, similar to HASHKEYS()
(02:31:01 PM) leifmadsen: DBKEYS() I guess?
(02:31:45 PM) Corydon76-home: So with no argument, retrieves families, with an argument, retrieves keys of that family?
(02:34:02 PM) leifmadsen: ya
(02:34:16 PM) leifmadsen: how would you iterate through layers of them?
(02:34:30 PM) leifmadsen: i.e. family/key/key/key ?
(02:34:43 PM) Corydon76-home: Essentially, yes
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303198 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added the moh_signaling option to specify what to do when the channel's
bridged peer puts the ISDN channel on and off of hold.
Implemented as a FSM to control libpri ISDN signaling when the bridged
peer places the channel on and off of hold with the AST_CONTROL_HOLD and
AST_CONTROL_UNHOLD control frames.
JIRA SWP-2687
JIRA ABE-2691
Review: https://reviewboard.asterisk.org/r/1063/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@300212 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added option v(mailbox@[context]) which tells MeetMe where to look for a users greet file. If one does not exist it clears the v option and defers to the functionality of i/I as/if set by the MeetMe() command.
Review: https://reviewboard.asterisk.org/r/1009/
(closes issue #18297)
Reported by: parisioa
Patches:
meetme_final_patch_v.diff uploaded by parisioa (license 1153)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296249 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r287647 | dvossel | 2010-09-20 17:09:16 -0500 (Mon, 20 Sep 2010) | 21 lines
Addition of the FrameHook API (AKA AwesomeHooks)
So far all our tools for viewing and manipulating media streams
within Asterisk have been entirely focused on audio. That made
sense then, but is not scalable now. The FrameHook API lets us
tap into and manipulate _ANY_ type of media or signaling passed
on a channel present today or in the future. This tool is a step
in the direction of expanding Asterisk's boundaries and will help
generate some rather interesting applications in the future.
In addition to the FrameHook API, a simple dialplan function
exercising the api has been included as well. This function
is called FRAME_TRACE(). FRAME_TRACE() allows for the internal
ast_frames read and written to a channel to be output. Filters
can be placed on this function to debug only certain types of frames.
This function could be thought of as an internal way of doing
ast_frame packet captures.
Review: https://reviewboard.asterisk.org/r/925/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@287648 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r286931 | jpeeler | 2010-09-15 14:22:15 -0500 (Wed, 15 Sep 2010) | 16 lines
Add parking extension for non-default parking lots.
This is a new feature that allows for parking to custom parking lots to be
accessed directly, rather than with channel variables or by changing the
default parking lot. The extension is set with the parkext option just as the
default parking lot is done. Also, the manager action has been updated to
optionally allow a specified parking lot.
(closes issue #14882)
Reported by: vmikhnevych
Patches:
patch_14882.txt uploaded by mnick (license 874)
modified by me
Review: https://reviewboard.asterisk.org/r/884/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@286939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r284950 | dvossel | 2010-09-03 12:29:02 -0500 (Fri, 03 Sep 2010) | 14 lines
authenticate OPTIONS requests just like we would an INVITE
OPTIONS requests should be treated the same as an INVITE
This includes authentication. This patch adds the ability for
incoming out of dialog OPTION requests to be authenticated
before providing a response indicating whether an extension
is available or not. The authentication routine works the
exact same way as it does for incoming INVITEs. This means
that if a peer has 'insecure=invite' in their peer definition,
the same will be true for the processing of the OPTIONS request.
Review: https://reviewboard.asterisk.org/r/881/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@284951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r282047 | dvossel | 2010-08-12 15:15:41 -0500 (Thu, 12 Aug 2010) | 35 lines
improved translation paths for wideband codecs
The problem I'm addressing is that Asterisk's current
method of building the least cost translation paths
between codecs does not take into account sample rate.
For instance, it was possible for siren14 (a 32khz codec),
to contain the a translation path to siren7 (a 16khz
audio codec) that goes through slin at 8khz. In this
case Asterisk takes a 32khz codec, down samples it to
8khz and then up samples it to 16khz which is terrible
regardless if it is computationally less expensive. This
patch now builds translation paths that give priority to
maintaining the best possible sample rate before taking
into consideration computational cost. This patch also
adds cli commands to expose what translation paths are
actually being used.
Changes:
1. Translation paths will never contain a step that changes
the sample rate unless absolutely necessary.
2. When choosing the best codec to make two channels compatible.
Shared codecs with the highest sample rate are given priority.
3. A new cli command to show all translation paths available
for a specific codec 'core show translation paths [codec name]'
has been added.
4. 'core show translation' which displays the translation
matrix now includes the new higher bit audio codecs in the table.
5. 'core show channel [channel name]' now displays the
translation paths if translation is used.
(closes issue #16841)
Reported by: dvossel
Review: https://reviewboard.asterisk.org/r/842/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282048 65c4cc65-6c06-0410-ace0-fbb531ad65f3
sip.conf configuration for the channel and for devices.
The Max-Forwards header is used to prevent loops in a SIP network. Each intermediary,
like SIP proxys and SBCs, decrement this counter and detects when it reaches zero,
at which point the SIP request is nicely killed in a SIP-friendly way.
Review: https://reviewboard.asterisk.org/r/778/
Thanks to dvossel for the review and good advice.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a generic API for accommodating IPv6 and IPv4 addresses
within Asterisk. While many files have been updated to make use of the
API, chan_sip and the RTP code are the files which actually support
IPv6 addresses at the time of this commit. The way has been paved for
easier upgrading for other files in the near future, though.
Big thanks go to Simon Perrault, Marc Blanchet, and Jean-Philippe Dionne
for their hard work on this.
(closes issue #17565)
Reported by: russell
Patches:
asteriskv6-test-report.pdf uploaded by russell (license 2)
Review: https://reviewboard.asterisk.org/r/743
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch as documented in the sample config allows one to optionally apply
white, black, or both types of filtering to manager events. The new
'eventfilter' option is set per user.
(closes issue #14861)
Reported by: fnordian
Patches:
eventfilter3.patch uploaded by fnordian (license 110),
modified by me
Review: https://reviewboard.asterisk.org/r/673/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* chan_dahdi supports dialing configuring and dialing by device file name.
DAHDI/span-name!local!1 will use /dev/dahdi/span-name/local/1 . Likewise
it may appear in chan_dahdi.conf as 'channel => span-name!local!1'.
* A new options for chan_dahdi.conf: 'ignore_failed_channels'. Boolean.
False by default. If set, chan_dahdi will ignore failed 'channel' entries.
Handy for the above name-based syntax as it does not depend on
initialization order.
* have my_pri_make_cc_dialstring() only manupulate dial-strings of group
(gGrR) dialing, which make it lsightly more complicated.
https://reviewboard.asterisk.org/r/535/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@269238 65c4cc65-6c06-0410-ace0-fbb531ad65f3
People expressed an interest in having access to the exact length of calls to a finer degree than seconds. See the CHANGES and UPGRADE.txt for usage also updated the sample configs to note the change.
Patch by snuffy.
(closes issue #16559)
Reported by: cianmaher
Tested by: cianmaher, snuffy
Review: https://reviewboard.asterisk.org/r/461/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@269153 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After 5 years in mantis and over a year on reviewboard, SRTP support is finally
being comitted. This includes generic CHANNEL dialplan functions that work for
getting the status of whether a call has secure media or signaling as defined
by the underlying channel technology and for setting whether or not a new
channel being bridged to a calling channel should have secure signaling or
media. See doc/tex/secure-calls.tex for examples.
Original patch by mikma, updated for trunk and revised by me.
(closes issue #5413)
Reported by: mikma
Tested by: twilson, notthematrix, hemanshurpatel
Review: https://reviewboard.asterisk.org/r/191/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268894 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Updated the UPGRADE.txt and CHANGES file stating that CDR records will not be explicity
written unless cdr.conf exists and is configured.
(closes issue #17373)
Reported by: wdoekes
Tested by: pabelanger
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267624 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Tilghman Lesher
Russell Bryant
Terry Wilson
Kinsey Moore
Kevin P. Fleming
Richard Mudgett
Jonathan Rose
Mark Michelson
Matthew Jordan
Walter Doekes
Paul Belanger
Leif Madsen
Gregory Nietsky
Jason Parker
Olle Johansson
Alec L Davis
Matthew Nicholson
David Vossel
Mark Murawki
Jeff Peeler
Andrew Parisio
David Ruggles
Tzafrir Cohen
Bradley Latus