58 Commits (b42934d019ed33a122f9d52309c26a5b2b51a2bc)

Author	SHA1	Message	Date
Alexander Traud	72e1234168	stasis: Fix for Doxygen. ... ASTERISK-29750 Change-Id: Iea50173e785b2e9d49bc24c0af7111cfd96d44a9	4 years ago
Kevin Harwell	cce2b0da95	stasis/app: don't lock an app before a call to send ... Calling 'app_send' eventually calls the app's message handler. It's possible for a handler to obtain a lock on another object, and then need/want to lock the app object. If the caller of 'app_send' locks the app object prior to calling then there's a potential for a deadlock, if another thread calls 'app_send' without locking. This patch makes it so 'app_send' is not called with the app object locked in the section of code doing such. ASTERISK-28423 #close Change-Id: I6767c6d0933c7db1b984018966eefca4c0638a27	5 years ago
Friendly Automation	8ad4760d83	Merge "res/res_ari: Added timestamp as a requirement for all ARI events"	6 years ago
sungtae kim	e2eb19b363	res/res_ari: Added timestamp as a requirement for all ARI events ... Changed to requirement to having timestamp for all of ARI events. The below ARI events were changed to having timestamp. PlaybackStarted, PlaybackContinuing, PlaybackFinished, RecordingStarted, RecordingFinished, RecordingFailed, ApplicationReplaced, ApplicationMoveFailed ASTERISK-28326 Change-Id: I382c2fef58f5fe107e1074869a6d05310accb41f	6 years ago
Joshua Colp	0231dd6ae7	stasis: Improve topic/subscription names and statistics. ... Topic names now follow: <subsystem>:<functionality>[/<object>] This ensures that they are all unique, and also provides better insight in to what each topic is for. Subscriber ids now also use the main topic name they are subscribed to and an incrementing integer as their identifier to make it easier to understand what the subscription is primarily responsible for. Both the CLI commands for listing topic and subscription statistics now sort to make it a bit easier to see what is going on. Subscriptions will now show all topics that they are receiving messages from, not just the main topic they were subscribed to. ASTERISK-28335 Change-Id: I484e971a38c3640f2bd156282e532eed84bf220d	6 years ago
Kevin Harwell	8681fc9db7	ARI event type filtering ... Event type filtering is now enabled, and configurable per application. An app is now able to specify which events are sent to the application by configuring an allowed and/or disallowed list(s). This can be done by issuing the following: PUT /applications/{applicationName}/eventFilter And then enumerating the allowed/disallowed event types as a body parameter. ASTERISK-28106 Change-Id: I9671ba1fcdb3b6c830b553d4c5365aed5d588d5b	6 years ago
Ben Ford	3f9c5fba95	res_stasis: Auto-create context and extens on Stasis app launch. ... At AstriCon, there was a strong desire for the ability to completely bypass dialplan when using ARI. This is possible through the automatic creation of a context and a couple of extensions whenever an application is started. For example, if you have an application named 'ari-example', a context named 'stasis-ari-example' will be automatically created whenever this application is started as long as one does not already exist. Two extensions (a match-all extension for Stasis and a 'h' extension) are created within this context. Any endpoint that registers to Asterisk within this context will send all calls to the corresponding Stasis application. When the application is destroyed, the context is removed. ASTERISK-28104 #close Change-Id: Ie35bd93075e05b05e3ae129a83c9426931b7ebac	6 years ago
Joshua C. Colp	1323730f6c	stasis / manager / ari: Better filter messages. ... Previously both AMI and ARI used a default route on their stasis message router to handle some of the messages for publishing out their respective connection. This caused messages to be given to their subscription that could not be formatted into AMI or JSON. This change adds an API call to the stasis message router which allows a default route to be set as well as formatters that the default route is expecting. This allows both AMI and ARI to specify that their default route only wants messages of their given formatter. By doing so stasis can more intelligently filter at publishing time so that they do not receive messages which will not be turned into AMI or JSON. ASTERISK-28244 Change-Id: I65272819a53ce99f869181d1d370da559a7d1703	6 years ago
George Joseph	3667c5e1d2	bridges: Remove reliance on stasis caching ... * The bridging core no longer uses the stasis cache for bridge snapshots. The latest bridge snapshot is now stored on the ast_bridge structure itself. * The following APIs are no longer available since the stasis cache is no longer used: ast_bridge_topic_cached() ast_bridge_topic_all_cached() * A topic pool is now used for individual bridge topics. * The ast_bridge_cache() function was removed since there's no longer a separate container of snapshots. * A new function "ast_bridges()" was created to retrieve the container of all bridges. Users formerly calling ast_bridge_cache() can use the new function to iterate over bridges and retrieve the latest snapshot directly from the bridge. * The ast_bridge_snapshot_get_latest() function was renamed to ast_bridge_get_snapshot_by_uniqueid(). * A new function "ast_bridge_get_snapshot()" was created to retrieve the bridge snapshot directly from the bridge structure. * The ast_bridge_topic_all() function now returns a normal topic not a cached one so you can't use stasis cache functions on it either. * The ast_bridge_snapshot_type() stasis message now has the ast_bridge_snapshot_update structure as it's data. It contains the last snapshot and the new one. * cdr, cel, manager and ari have been updated to use the new arrangement. Change-Id: I7049b80efa88676ce5c4666f818fa18ad1985369	7 years ago
Joshua Colp	50ac85cb40	stasis: Segment channel snapshot to reduce creation cost. ... When a channel snapshot was created it used to be done from scratch, copying all data (many strings). This incurs a cost when doing so. This change segments the channel snapshot into different components which can be reused if unchanged from the previous snapshot creation, reducing the cost. In normal cases this results in some pointers being copied with reference count being bumped, some integers being set, and a string or two copied. The other benefit is that it is now possible to determine if a channel snapshot update is redundant and thus stop it before a message is published to stasis. The specific segments in the channel snapshot were split up based on whether they are changed together, how often they are changed, and their general grouping. In practice only 1 (or 0) of the segments actually get changed in normal operation. Invalidation is done by setting a flag on the channel when the segment source is changed, forcing creation of a new segment when the channel snapshot is created. ASTERISK-28119 Change-Id: I5d7ef3df963a88ac47bc187d73c5225c315f8423	7 years ago
Joshua Colp	d0ccbb3377	stasis: Use an implementation specific channel snapshot cache. ... Channels no longer use the Stasis cache for channel snapshots. Instead they are stored in a hash table in stasis_channels which reduces the number of Stasis messages created and allows better storage. As a result the following APIs are no longer available since the stasis cache is no longer used: ast_channel_topic_cached() ast_channel_topic_all_cached() The ast_channel_cache_all() and ast_channel_cache_by_name() functions now return an ao2_container of ast_channel_snapshots rather than a container of stasis_messages therefore you can't (and don't need to) call stasis_cache functions on it. The ast_channel_topic_all() function now returns a normal topic not a cached one so you can't use stasis cache functions on it either. The ast_channel_snapshot_type() stasis message now has the ast_channel_snapshot_update structure as it's data. It contains the last snapshot and the new one. ast_channel_snapshot_get_latest() still returns the latest snapshot. The latest snapshot is now stored on the channel itself to eliminate cache hits when Stasis messages that have the snapshot as a payload are created. ASTERISK-28102 Change-Id: I9334febff60a82d7c39703e49059fa3a68825786	7 years ago
Corey Farrell	527cf5a570	Remove redundant module checks and references. ... This removes references that are no longer needed due to automatic references created by module dependencies. In addition this removes most calls to ast_module_check as they were checking modules which are listed as dependencies. Change-Id: I332a6e8383d4c72c8e89d988a184ab8320c4872e	7 years ago
Joshua Colp	f2c583624b	Merge "res_stasis: Reduce RAII_VAR usage."	7 years ago
Corey Farrell	55a540272f	res_stasis: Reduce RAII_VAR usage. ... In addition to being a micro-optimization (RAII_VAR has overhead), this change improves output of REF_DEBUG. Unfortunately when RAII_VAR calls ao2_cleanup it does so from a generated _dtor_varname function. For example this caused _dtor_app to release a reference instead of __stasis_app_unregister. Change-Id: I4ce67120583a446babf9adeec678b71d37fcd9e5	7 years ago
Corey Farrell	6870ba5f26	res_stasis: Fix app_is_subscribed_bridge_id. ... Instead of searching for bridge_id provided in an argument this function always searched for BRIDGE_ALL first. Rewrite this function to work like the similar functions for channel and endpoint functions. Change-Id: Ib5caca69e11727c5c8a7284a1d00621f40f1e60a	7 years ago
Sean Bright	fd0ca1c3f9	Remove as much trailing whitespace as possible. ... Change-Id: I873c1c6d00f447269bd841494459efccdd2c19c0	7 years ago
Joshua Colp	d91d0e992d	Merge "res_stasis: Fix multiple leaks."	8 years ago
Corey Farrell	801094da7b	res_stasis: Fix multiple leaks. ... * res/stasis/app.c JSON passed to app_send needs to be released. * res/stasis_message.c: objects leak if vector append fails. Change-Id: I8dd5385b9f50a5cadf2b1d16efecffd6ddb4db4a	8 years ago
Richard Mudgett	9771f089f5	stasis/app.c: Optimize stasis_app_get_debug_by_name() ... * Eliminate RAII_VAR() * Short circuit application name lookup if global debug enabled. Change-Id: I5f78b7bd6ca7fd2c3b07cbbe036c6a93b4681123	8 years ago
George Joseph	6691606723	ari: Implement 'debug all' and request/response logging ... The 'ari set debug' command has been enhanced to accept 'all' as an application name. This allows dumping of all apps even if an app hasn't registered yet. To accomplish this, a new global_debug global variable was added to res/stasis/app.c and new APIs were added to set and query the value. 'ari set debug' now displays requests and responses as well as events. This required refactoring the existing debug code. * The implementation for 'ari set debug' was moved from stasis/cli.{c,h} to ari/cli.{c,h}, and stasis/cli.{c,h} were deleted. * In order to print the body of incoming requests even if a request failed, the consumption of the body was moved from the ari stubs to ast_ari_callback in res_ari.c and the moustache templates were then regenerated. The body is now passed to ast_ari_invoke and then on to the handlers. This results in code savings since that template was inserted multiple times into all the stubs. An additional change was made to the ao2_str_container implementation to add partial key searching and a sort function. The existing cli code assumed it was already there when it wasn't so the tab completion was never working. Change-Id: Ief936f747ce47f1fb14035fbe61152cf766406bf (cherry picked from commit 1d890874f3)	8 years ago
Matt Jordan	a72ef38113	res/ari/resource_bridges: Add the ability to manipulate the video source ... In multi-party bridges, Asterisk currently supports two video modes: * Follow the talker, in which the speaker with the most energy is shown to all participants but the speaker, and the speaker sees the previous video source * Explicitly set video sources, in which all participants see a locked video source Prior to this patch, ARI had no ability to manipulate the video source. This isn't important for two-party bridges, in which Asterisk merely relays the video between the participants. However, in a multi-party bridge, it can be advantageous to allow an external application to manipulate the video source. This patch provides two new routes to accomplish this: (1) setVideoSource: POST /bridges/{bridgeId}/videoSource/{channelId} Sets a video source to an explicit channel (2) clearVideoSource: DELETE /bridges/{bridgeId}/videoSource Removes any explicit video source, and sets the video mode to talk detection ASTERISK-26595 #close Change-Id: I98e455d5bffc08ea5e8d6b84ccaf063c714e6621	9 years ago
Matt Jordan	c30d677333	res/stasis: Add CLI commands for displaying/debugging ARI apps ... This patch adds three new CLI commands: - ari show apps: list the registered ARI applications - ari show app: show detailed information about an ARI application - ari set debug: dump events being sent to an ARI application Note that while these CLI commands live in the res_stasis module, we use the 'ari' family for these commands. This was done as most users of Asterisk aren't aware of the semantic differences between ARI and res_stasis, and some 'ari' CLI commands already exist. ASTERISK-26488 #close Change-Id: I51ad6ff0cabee0d69db06858c13f18b1c513c9f5	9 years ago
Corey Farrell	a6e5bae3ef	Remove ASTERISK_REGISTER_FILE. ... ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes all traces of it. Previously exported symbols removed: * __ast_register_file * __ast_unregister_file * ast_complete_source_filename This also removes the mtx_prof static variable that was declared when MTX_PROFILE was enabled. This variable was only used in lock.c so it is now initialized in that file only. ASTERISK-26480 #close Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966	9 years ago
Matt Jordan	dd5129d84a	res/ari: Add the Asterisk EID field to outgoing events ... This patch adds the Asterisk EID field to all outgoing ARI events. Because this field should be added to all events as they are transmitted, it is appended to the JSON message just prior to it being handed off to the application message handler. This makes it somewhat resilient to both new events being added to ARI, as well as other potential event transport mechanisms. ASTERISK-26470 #close Change-Id: Ieff0ecc24464e83f3f44e9c3e7bd9a5d70b87a1d	9 years ago
Richard Mudgett	9c49b96374	Audit ast_json_pack() calls for needed UTF-8 checks. ... Added needed UTF-8 checks before constructing json objects in various files for strings obtained outside the system. In this case string values from a channel driver's peer and not from the user setting channel variables. * aoc.c: Fixed type mismatch in s_to_json() for time and granularity json object construction. ASTERISK-26466 Reported by: Richard Mudgett Change-Id: Iac2d867fa598daba5c5dbc619b5464625a7f2096	9 years ago
Joshua Colp	d17d9a9288	json: Audit ast_json_* usage for thread safety. ... The JSON library Asterisk uses, jansson, is not thread safe for us in a few ways. To help with this wrappers for JSON object reference count increasing and decreasing were added which use a global lock to ensure they don't clobber over each other. This does not extend to reference count manipulation within the jansson library itself. This means you can't safely use the object borrowing specifier (O) in ast_json_pack and you can't share JSON instances between objects. This change removes uses of the O specifier and replaces them with the o specifier and an explicit ast_json_ref. Some cases of instance sharing have also been removed. ASTERISK-25601 #close Change-Id: I06550d8b0cc1bfeb56cab580a4e608ae4f1ec7d1	10 years ago
Matt Jordan	b99a705262	ARI: Add the ability to subscribe to all events ... This patch adds the ability to subscribe to all events. There are two possible ways to accomplish this: (1) On initial WebSocket connection. This patch adds a new query parameter, 'subscribeAll'. If present and True, Asterisk will subscribe the applications to all ARI events. (2) Via the applications resource. When subscribing in this manner, an ARI client should merely specify a blank resource name, i.e., 'channels:' instead of 'channels:12354'. This will subscribe the application to all resources of the 'channels' type. ASTERISK-24870 #close Change-Id: I4a943b4db24442cf28bc64b24bfd541249790ad6	10 years ago
Matt Jordan	9cffcca5f9	res/ari: Register Stasis application on WebSocket attempt ... Prior to this patch, when a WebSocket connection is made, ARI would not be informed of the connection until after the WebSocket layer had accepted the connection. This created a brief race condition where the ARI client would be notified that it was connected, a channel would be sent into the Stasis dialplan application, but ARI would not yet have registered the Stasis application presented in the HTTP request that established the WebSocket. This patch resolves this issue by doing the following: * When a WebSocket attempt is made, a callback is made into the ARI application layer, which verifies and registers the apps presented in the HTTP request. Because we do not yet have a WebSocket, we cannot have an event session for the corresponding applications. Some defensive checks were thus added to make the application objects tolerant to a NULL event session. * When a WebSocket connection is made, the registered application is updated with the newly created event session that wraps the WebSocket connection. ASTERISK-24988 #close Reported by: Joshua Colp Change-Id: Ia5dc60dc2b6bee76cd5aff0f69dd53b36e83f636	10 years ago
Matt Jordan	4a58261694	git migration: Refactor the ASTERISK_FILE_VERSION macro ... Git does not support the ability to replace a token with a version string during check-in. While it does have support for replacing a token on clone, this is somewhat sub-optimal: the token is replaced with the object hash, which is not particularly easy for human consumption. What's more, in practice, the source file version was often not terribly useful. Generally, when triaging bugs, the overall version of Asterisk is far more useful than an individual SVN version of a file. As a result, this patch removes Asterisk's support for showing source file versions. Specifically, it does the following: * Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and remove passing the version in with the macro. Other facilities than 'core show file version' make use of the file names, such as setting a debug level only on a specific file. As such, the act of registering source files with the Asterisk core still has use. The macro rename now reflects the new macro purpose. * main/asterisk: - Refactor the file_version structure to reflect that it no longer tracks a version field. - Remove the "core show file version" CLI command. Without the file version, it is no longer useful. - Remove the ast_file_version_find function. The file version is no longer tracked. - Rename ast_register_file_version/ast_unregister_file_version to ast_register_file/ast_unregister_file, respectively. * main/manager: Remove value from the Version key of the ModuleCheck Action. The actual key itself has not been removed, as doing so would absolutely constitute a backwards incompatible change. However, since the file version is no longer tracked, there is no need to attempt to include it in the Version key. * UPGRADE: Add notes for: - Modification to the ModuleCheck AMI Action - Removal of the "core show file version" CLI command Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e	10 years ago
Scott Griepentrog	49f405fe4c	stasis transfer: fix a race condition on stasis bridge push ... After a bridge transfer completes where a local replacement channel is used, a stasis transfer message with the details of the transfer is sent. This is processed by stasis which then sets the stasis app name and replaced channel snapshot on the replacement channel. However, since a separate thread was already started to run stasis on the new replacement channel, a race was on to see if the message processing would be completed before the app name was needed, otherwise the channel would be hung up. This change moves the calls used to set the stasis app name and the replace snapshot to the bridge_stasis_push function callback from the bridge transfer logic, allowing the steps to be completed earlier and more deterministically, and the race elimianted. NOTE: the swap channel parameter to bridge_stasis_push (and thus all bridge push callbacks) must always be present when performing a swap with another channel. ASTERISK-24649 #close Reported by: John Bigelow Review: https://reviewboard.asterisk.org/r/4341/ ........ Merged revisions 430939 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430940 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Mark Michelson	fe7671fee6	Add new AMI and ARI events for connected line changes on a channel. ... The AMI event is called NewConnectedLine and the ARI event is called ChannelConnectedLine. ASTERISK-24554 #close Reported by Matt Jordan Review: https://reviewboard.asterisk.org/r/4231 ........ Merged revisions 429064 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429084 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	4bb556a847	Stasis: Fix StasisStart/End order and missing events ... This corrects several bugs that currently exist in the stasis application code. * After a masquerade, the resulting channels have channel topics that do not match their uniqueids ** Masquerades now swap channel topics appropriately * StasisStart and StasisEnd messages are leaked to observer applications due to being published on channel topics ** StasisStart and StasisEnd publishing is now properly restricted to controlling apps via app topics * Race conditions exist where StasisStart and StasisEnd messages due to a masquerade may be received out of order due to being published on different topics ** These messages are now published directly on the app topic so this is now a non-issue * StasisEnds are sometimes missing when sent due to masquerades and bridge swaps into and out of Stasis() ** This was due to StasisEnd processing adjusting message-sent flags after Stasis() had already exited and Stasis() had been re-entered ** This was corrected by adjusting these flags prior to sending the message while the initial Stasis() application was still shutting down Review: https://reviewboard.asterisk.org/r/4213/ ASTERISK-24537 #close Reported by: Matt DiMeo ........ Merged revisions 429061 from http://svn.asterisk.org/svn/asterisk/branches/12 ........ Merged revisions 429062 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429063 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	2d9471ab1f	Fix race condition that could result in ARI transfer messages not being sent. ... From reviewboard: "During blind transfer testing, it was noticed that tests were failing occasionally because the ARI blind transfer event was not being sent. After investigating, I detected a race condition in the blind transfer code. When blind transferring a single channel, the actual transfer operation (i.e. removing the transferee from the bridge and directing them to the proper dialplan location) is queued onto the transferee bridge channel. After queuing the transfer operation, the blind transfer Stasis message is published. At the time of publication, snapshots of the channels and bridge involved are created. The ARI subscriber to the blind transfer Stasis message then attempts to determine if the bridge or any of the involved channels are subscribed to by ARI applications. If so, then the blind transfer message is sent to the applications. The way that the ARI blind transfer message handler works is to first see if the transferer channel is subscribed to. If not, then iterate over all the channel IDs in the bridge snapshot and determine if any of those are subscribed to. In the test we were running, the lone transferee channel was subscribed to, so an ARI event should have been sent to our application. Occasionally, though, the bridge snapshot did not have any channels IDs on it at all. Why? The problem is that since the blind transfer operation is handled by a separate thread, it is possible that the transfer will have completed and the channels removed from the bridge before we publish the blind transfer Stasis message. Since the blind transfer has completed, the bridge on which the transfer occurred no longer has any channels on it, so the resulting bridge snapshot has no channels on it. Through investigation of the code, I found that attended transfers can have this issue too for the case where a transferee is transferred to an application." The fix employed here is to decouple the creation of snapshots for the transfer messages from the publication of the transfer messages. This way, snapshots can be created to reflect what they are at the time of the transfer operation. Review: https://reviewboard.asterisk.org/r/4135 ........ Merged revisions 427848 from http://svn.asterisk.org/svn/asterisk/branches/12 ........ Merged revisions 427870 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427873 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	74e706878b	Stasis: Fix StasisEnd message ordering ... This change corrects message ordering in cases where a channel-related message can be received after a Stasis/ARI application has received the StasisEnd message. The StasisEnd message was being passed to applications directly without waiting for the channel topic to empty. As a result of this fix, other bugs were also identified and fixed: * StasisStart messages were also being sent directly to apps and are now routed through the stasis message bus properly * Masquerade monitor datastores were being removed at the incorrect time in some cases and were causing StasisEnd messages to not be sent * General refactoring where necessary for the above * Unsubscription on StasisEnd timing changes to prevent additional messages from following the StasisEnd when they shouldn't A channel sanitization function pointer was added to reduce processing and AO2 lookups. Review: https://reviewboard.asterisk.org/r/4163/ ASTERISK-24501 #close Reported by: Matt Jordan ........ Merged revisions 427788 from http://svn.asterisk.org/svn/asterisk/branches/12 ........ Merged revisions 427789 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427790 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	36f4bff943	Stasis: Add information to blind transfer event ... When a blind transfer occurs that is forced to create a local channel pair to satisfy the transfer request, information about the local channel pair is not published. This adds a field to describe that channel to the blind transfer message struct so that this information is conveyed properly to consumers of the blind transfer message. This also fixes a bug in which Stasis() was unable to properly identify the channel that was replacing an existing Stasis-controlled channel due to a blind transfer. Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/3921/ ........ Merged revisions 421537 from http://svn.asterisk.org/svn/asterisk/branches/12 ........ Merged revisions 421538 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421539 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	ba5d5da60b	Improve call forwarding reporting, especially with regards to ARI. ... This patch addresses a few issues: 1) The order of Dial events have been changed when performing a call forward. The order has now been altered to 1) Dial begins dialing channel A. 2) When A forwards the call to B, we issue the dial end event to channel A, indicating the dial is being canceled due to a forward to B. 3) When the call to channel B occurs, we then issue a new dial begin to channel B. 2) Call forwards are now reported on the calling channel, not the peer channel. 3) AMI DialEnd events have been altered to display the extension the call is being forwarded to when relevant. 4) You can now get the values of channel variables for channels that are not currently in the Stasis application. This brings the retrieval of channel variables more in line with the rest of channel read operations since they may be performed on channels not in Stasis. ASTERISK-24134 #close Reported by Matt Jordan ASTERISK-24138 #close Reported by Matt Jordan Patches: forward-shenanigans.diff uploaded by Matt Jordan (License #6283) Review: https://reviewboard.asterisk.org/r/3899 ........ Merged revisions 420794 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421310 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	0ac7f96057	Stasis: Convey transfer information to applications ... This fixes a class of issues where Stasis applications were not made aware that their channels were being manipulated or replaced by external entitiessuch as transfers, AMI commands, or dialplan applications such as Bridge(). Inconsistent information such as StasisEnd events with unknown channels as a result of masquerades has also been corrected. To accomplish these fixes, several new fields were added to blind and attended transfer messages as well as StasisStart and BridgeAttendedTransfer Stasis events. ASTERISK-23941 #close Review: https://reviewboard.asterisk.org/r/3865/ Review: https://reviewboard.asterisk.org/r/3857/ Review: https://reviewboard.asterisk.org/r/3852/ Review: https://reviewboard.asterisk.org/r/3816/ Review: https://reviewboard.asterisk.org/r/3731/ Review: https://reviewboard.asterisk.org/r/3729/ Review: https://reviewboard.asterisk.org/r/3728/ ........ Merged revisions 420325 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420338 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	47bf7efc4d	Multiple revisions 420089-420090,420097 ... ........ r420089 | mjordan | 2014-08-05 15:10:52 -0500 (Tue, 05 Aug 2014) | 72 lines ARI: Add channel technology agnostic out of call text messaging This patch adds the ability to send and receive text messages from various technology stacks in Asterisk through ARI. This includes chan_sip (sip), res_pjsip_messaging (pjsip), and res_xmpp (xmpp). Messages are sent using the endpoints resource, and can be sent directly through that resource, or to a particular endpoint. For example, the following would send the message "Hello there" to PJSIP endpoint alice with a display URI of sip:asterisk@mycooldomain.org: ari/endpoints/sendMessage?to=pjsip:alice&from=sip:asterisk@mycooldomain.org&body=Hello+There This is equivalent to the following as well: ari/endpoints/PJSIP/alice/sendMessage?from=sip:asterisk@mycooldomain.org&body=Hello+There Both forms are available for message technologies that allow for arbitrary destinations, such as chan_sip. Inbound messages can now be received over ARI as well. An ARI application that subscribes to endpoints will receive messages from those endpoints: { "type": "TextMessageReceived", "timestamp": "2014-07-12T22:53:13.494-0500", "endpoint": { "technology": "PJSIP", "resource": "alice", "state": "online", "channel_ids": [] }, "message": { "from": "\"alice\" <sip:alice@127.0.0.1>", "to": "pjsip:asterisk@127.0.0.1", "body": "Watson, come here.", "variables": [] }, "application": "testsuite" } The above was made possible due to some rather major changes in the message core. This includes (but is not limited to): - Users of the message API can now register message handlers. A handler has two callbacks: one to determine if the handler has a destination for the message, and another to handle it. - All dialplan functionality of handling a message was moved into a message handler provided by the message API. - Messages can now have the technology/endpoint associated with them. Various other properties are also now more easily accessible. - A number of ao2 containers that weren't really needed were replaced with vectors. Iteration over ao2_containers is expensive and pointless when the lifetime of things is well defined and the number of things is very small. res_stasis now has a new file that makes up its structure, messaging. The messaging functionality implements a message handler, and passes received messages that match an interested endpoint over to the app for processing. Note that inadvertently while testing this, I reproduced ASTERISK-23969. res_pjsip_messaging was incorrectly parsing out the 'to' field, such that arbitrary SIP URIs mangled the endpoint lookup. This patch includes the fix for that as well. Review: https://reviewboard.asterisk.org/r/3726 ASTERISK-23692 #close Reported by: Matt Jordan ASTERISK-23969 #close Reported by: Andrew Nagy ........ r420090 | mjordan | 2014-08-05 15:16:37 -0500 (Tue, 05 Aug 2014) | 2 lines Remove automerge properties :-( ........ r420097 | mjordan | 2014-08-05 16:36:25 -0500 (Tue, 05 Aug 2014) | 2 lines test_message: Fix strict-aliasing compilation issue ........ Merged revisions 420089-420090,420097 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420098 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	d4b436d0ea	ARI/res_stasis: Subscribe to both Local channel halves when originating to app ... This patch fixes two bugs: 1. When originating a channel into a Stasis application, we already create a subscription for the channel that is going into our Stasis app. Unfortunately, when you create a Local channel and pass it off to a Stasis app, you really aren't creating just one channel: you're creating two. This patch snags the second half of the Local channel pair (assuming it is a Local channel pair, but luckily core_local is kind about such assumptions) and subscribes to it as well. 2. Subscriptions are a bit sticky right now. If a subscription is made, the 'interest' count gets bumped on the Stasis subscription - but unless something explicitly unsubscribes the channel, said subscription sticks around. This is not much of a problem is a user is creating the subscription - if they made it, they must want it. However, when we are creating implicit subscriptions, we need to make sure something clears them out. This patch takes a pessimistic approach: it watches the cache updates coming from Stasis and, if we notice that the cache just cleared out an object, we delete our subscription object. This keeps our ao2 container of Stasis forwards in an application from growing out of hand; it also is a bit more forgiving for end users who may not realize they were supposed to unsubscribe from that channel that just hung up. Review: https://reviewboard.asterisk.org/r/3710/ #ASTERISK-23939 #close ........ Merged revisions 418089 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418090 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Scott Griepentrog	cf21644d6a	ARI: Add ability to raise arbitrary User Events ... User events can now be generated from ARI. Events can be signalled with arbitrary json variables, and include one or more of channel, bridge, or endpoint snapshots. An application must be specified which will receive the event message (other applications can subscribe to it). The message will also be delivered via AMI provided a channel is attached. Dialplan generated user event messages are still transmitted via the channel, and will only be received by a stasis application they are attached to or if the channel is subscribed to. This change also introduces the multi object blob mechanism used to send multiple snapshot types in a single message. The dialplan app UserEvent was also changed to use multi object blob, and a new stasis message type created to handle them. ASTERISK-22697 #close Review: https://reviewboard.asterisk.org/r/3494/ ........ Merged revisions 414405 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414406 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	9b71a87108	res_stasis: Fix crash when handling a failed blind transfer message. ... This changes fixes a crash that occurs when stasis determines if it should send a message out to an application or not. The code incorrectly assumed that a bridge snapshot would always be present when in reality for failure cases it may not be. ASTERISK-23573 #close ........ Merged revisions 412882 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412883 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	45ade68cb4	Remove unused RAII_VAR() declarations. ... * Remove unused RAII_VAR() declarations. The compiler cannot catch these because the cleanup function "references" the unused variable. Some actually allocated and released resources that were never used. * Fixed some whitespace issues in stasis_bridges.c. ........ Merged revisions 412399 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412400 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	2c5484c869	stasis/app.c: Add some extra debugging for subscription counts ... Events are sent to a connected ARI application based on the things that ARI application cares about. These subscriptions can be set up implicitly - such as when that ARI application creates a new object - or explicitly, via the application resource's subscription operations. Debugging *why* something was being sent to an application - or why something was not being sent to an application - was a bit tricky, as there was no debug information for the subscriptions. This patch adds some debug level 3 statements that show the subscription counts for applications. (Level 3 was chosen as it matches the verbose level 3 statements elsewhere) ........ Merged revisions 410650 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410651 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	e5899852cc	res_stasis: Enable transfers and provide events when they occur. ... This change enables transfers within ARI created bridges and adds events for when they occur. Unlike other events these will be received if *any* subscribed object is involved in the transfer. (closes issue ASTERISK-22984) Reported by: David M. Lee Review: https://reviewboard.asterisk.org/r/3120/ ........ Merged revisions 407153 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407154 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	3a5cc054ed	res_stasis: Expose event for call forwarding and follow forwarded channel. ... This change adds an event for when an originated call is redirected to another target. This event contains the original channel and the newly created channel. If a stasis subscription exists on the original originated channel for a stasis application then a new subscription will also be created on the stasis application to the redirected channel. This allows the application to follow the call path completely. (closes issue ASTERISK-22719) Reported by: Joshua Colp Review: https://reviewboard.asterisk.org/r/3054/ ........ Merged revisions 403808 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403810 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	ed48377994	ARI: Implement device state API ... Created a data model and implemented functionality for an ARI device state resource. The following operations have been added that allow a user to manipulate an ARI controlled device: Create/Change the state of an ARI controlled device PUT /deviceStates/{deviceName}&{deviceState} Retrieve all ARI controlled devices GET /deviceStates Retrieve the current state of a device GET /deviceStates/{deviceName} Destroy a device-state controlled by ARI DELETE /deviceStates/{deviceName} The ARI controlled device must begin with 'Stasis:'. An example controlled device name would be Stasis:Example. A 'DeviceStateChanged' event has also been added so that an application can subscribe and receive device change events. Any device state, ARI controlled or not, can be subscribed to. While adding the event, the underlying subscription control mechanism was refactored so that all current and future resource subscriptions would be the same. Each event resource must now register itself in order to be able to properly handle [un]subscribes. (issue ASTERISK-22838) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/3025/ ........ Merged revisions 403134 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403135 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	d9015a5356	ARI: Don't leak implementation details ... This change prevents channels used as implementation details from leaking out to ARI. It does this by preventing creation of JSON blobs of channel snapshots created from those channels and sanitizing JSON blobs of bridge snapshots as they are created. This introduces a framework for excluding information from output targeted at Stasis applications on a consumer-by-consumer basis using channel sanitization callbacks which could be extended to bridges or endpoints if necessary. This prevents unhelpful error messages from being generated by ast_json_pack. This also corrects a bug where BridgeCreated events would not be created. (closes issue ASTERISK-22744) Review: https://reviewboard.asterisk.org/r/2987/ Reported by: David M. Lee ........ Merged revisions 403069 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403070 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	069da1e75a	stasis: add functions embarrassingly missing from r400522 ... I neglected to implement two of the endpoint subscription functions when I did the work. Normally, you'll only hit that when you unsubscribe from a specific endpoint. ........ Merged revisions 402276 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402277 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	7eea4ab872	You'd think that new files would be free of whitespace issues. But you would be wrong. ... ........ Merged revisions 402003 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402004 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	8d7873b836	ARI: Add subscription support ... This patch adds an /applications API to ARI, allowing explicit management of Stasis applications. * GET /applications - list current applications * GET /applications/{applicationName} - get details of a specific application * POST /applications/{applicationName}/subscription - explicitly subscribe to a channel, bridge or endpoint * DELETE /applications/{applicationName}/subscription - explicitly unsubscribe from a channel, bridge or endpoint Subscriptions work by a reference counting mechanism: if you subscript to an event source X number of times, you must unsubscribe X number of times to stop receiveing events for that event source. Review: https://reviewboard.asterisk.org/r/2862 (issue ASTERISK-22451) Reported by: Matt Jordan ........ Merged revisions 400522 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400523 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago