132 Commits (b2987774588098248830917819586039fcb96882)

Author	SHA1	Message	Date
George Joseph	8222e8ee2f	bundled-jansson: On OpenSuse Leap libjansson.a was placed in lib64 ... On OpenSuse Leap, libjansson.a is installed in third-party/jansson/dest/lib64 instead of lib (which is where the top-level makeopts looks). This causes a link failure. * Updated jansson/Makefile to add an explicit --libdir to force the installation to third-party/jansson/dest/lib. ASTERISK-28271 Reported by: David Wilcox Change-Id: Ibf8af75e5da13562105fcc39ed898c6ef0b5a5f3	7 years ago
Jean Aunis	e456600575	build : Fix cross-compilation errors ... Bundled pjproject and jansson must be configured with the host and build parameters provided to the configure script. ASTERISK-28250 Change-Id: If0a76e52a87d4ab82b7d4c72d27d8759ca931880	7 years ago
George Joseph	8414ca191e	pjproject_bundled: Add patch for double free issue in timer heap ... Fixed #2172: Avoid double reference counter decrements in timer in the scenario of race condition between pj_timer_heap_cancel() and pj_timer_heap_poll(). Change-Id: If000e9438c83ac5084b678eb811e902c035bd2d8	7 years ago
George Joseph	6109126e2d	Merge "pjproject_bundled: check whether UPDATE is supported on outgoing calls" into 13	7 years ago
Pirmin Walthert	385d7523c7	pjproject_bundled: check whether UPDATE is supported on outgoing calls ... In ASTERISK-27095 an issue had been fixed because of which chan_pjsip was not trying to send UPDATE messages when connected_line_method was set to invite. However this only solved the issue for incoming INVITES. For outgoing INVITES (important when transferring calls) the options variable needs to be updated at a different place. ASTERISK-28182 #close Reported-by: nappsoft Change-Id: I76cc06da4ca76ddd6dce814a8b97cc66b98aaf29	7 years ago
Corey Farrell	7c346aa4f4	jansson: Upgrade to 2.12. ... This brings in jansson-2.12, removes all patches that were merged upstream. README is created in third-party/jansson/patches to explain how to add patches but also because the patches folder must exist for the build process to succeed. Change-Id: If0f2d541c50997690660c21fb7b03d625a5cdadd	7 years ago
Corey Farrell	433f1acbec	pjproject-bundled: Use AST_DEVMODE for conditional compilation. ... We previously allowed resample and g711 codecs to be built when TEST_FRAMEWORK was enabled. This could cause errors if the testsuite was run without this option enabled. Switch the build system to allow those codecs to be built when --enable-dev-mode is used. This removes a chance for strange testsuite errors from use of an inadequate pjsua binary. Change-Id: Iee8a3613cdb711fa7e7d217c5a775a575907ae22	7 years ago
Corey Farrell	d4d3818ecb	jansson-bundled: Patch for off-nominal crash. ... pack_string crashed on non-NULL strings returned when s->has_error was true if the string was the result of 's' format without '#', '%' or '+'. Change-Id: Ic125df691d81ba2cbc413e37bdae657b304d20d0	7 years ago
Richard Mudgett	75565adb55	bundled pjproject: Remove timer cleanup usage patch. ... This patch is not in the upstream pjproject and does unsafe things with the timer->_timer_id and timer->_grp_lock values in pj_timer_entry_reset() outside of the timer heap lock. pj_timer_entry_reset() is also called for timers that are not about to be rescheduled in a few places. Change-Id: I4fe0b4bc648f7be5903cf4531b94fc87275713c1	7 years ago
Corey Farrell	b994c03650	jansson-bundled: Add patches to improve json_pack error reporting. ... Change-Id: I045e420d5e73e60639079246e810da6ae21ae22b	7 years ago
George Joseph	4ddca53164	Merge "jansson: Backport fixes to bundled, use json_vsprintf if available." into 13	7 years ago
Corey Farrell	9c35f80adf	jansson: Backport fixes to bundled, use json_vsprintf if available. ... Use json_vsprintf from versions which contain fix for va_copy leak. Apply fixes from jansson master: * va_copy leak fix. * Avoid potential invalid memory read in json_pack. * Rename variable that shadowed another. Change-Id: I7522e462d2a52f53010ffa1e7d705c666ec35539	7 years ago
Kevin Harwell	286cf80bec	rtp_engine: rtcp_report_to_json can overflow the ssrc integer value ... When writing an RTCP report to json the code attempts to pack the "ssrc" and "source_ssrc" unsigned integer values as a signed int value type. This of course means if the ssrc's unsigned value is greater than that which can fit into a signed integer value it gets converted to a negative number. Subsequently, the negative value goes out in the json report. This patch now packs the value as a json_int_t, which is the widest integer type available on a given system. This should make it so the value no longer overflows. Note, this was caught by two failing tests hep/rtcp-receiver/ and hep/rtcp-sender. Change-Id: I2af275286ee5e795b79f0c3d450d9e4b28e958b0	7 years ago
Richard Mudgett	418eb22ba6	pjproject: Update initial 2.8 patches to apply cleanly. ... ASTERISK-28059 Change-Id: I027472f2753391646dde594a709a75f14422db93	7 years ago
Joshua Colp	cd2deadb69	pjproject: Upgrade to 2.8. ... This change brings in PJSIP 2.8, removes all the patches that were merged upstream, and makes a minor change to support a breaking change that was done. ASTERISK-28059 Change-Id: I5097772b11b0f95c3c1f52df6400158666f0a189	7 years ago
Corey Farrell	436daa50ff	Build System: Resolve conflict between DESTDIR and bundled jansson. ... If Asterisk is built using a DESTDIR this will cause the bundled jansson to be installed to an unexpected location and we will fail to find it. Change-Id: Id033e2813261e0d45232383d44c6391122169548	7 years ago
Joshua Colp	4fa27efc03	Merge "pjproject_bundled: Fix for Solaris builds. Do not undef s_addr." into 13	7 years ago
Alexander Traud	819842f7fb	pjproject_bundled: Fix for Solaris builds. Do not undef s_addr. ... The authors of PJProject undef s_addr because of some issue in Microsoft Windows. However in Oracle Solaris, s_addr is not a structure member, but defined to map to the real structure member. Updates the patch from ASTERISK_20366 ASTERISK-27997 Change-Id: I8223026d4d54e2a46521085fcc94bfa6ebe35b11	7 years ago
Alexander Traud	0d880fac93	pjproject_bundled: Find shared libraries in root --with-ssl=PATH. ... The script configure from Teluu expects shared libraries (.so) in a subfolder called 'lib', when --with-xyz=PATH is specified. However for OpenSSL, the default location is the root of the source folder = PATH. Furthermore, Asterisk supports both, 'lib' and root. For consistency and because Asterisk is using (only) OpenSSL in PJProject, it is enhanced to support both locations, just like Asterisk. ASTERISK-27995 Change-Id: I8eb916a88b6b8c22e29bb40bee8faaca6c73406f	7 years ago
Torrey Searle	ff94fcb6f1	thirdparty/pjproject: fix deadlock in response retransmissions ... The tdata containing the response can be shared by both the dialog object and the tsx object. In order to prevent the race condition between the tsx retransmission and the dialog sending a response, clone the tdata before modifying it for the dialog send response. ASTERISK-27966 #close Change-Id: Ic381004a3a212fe1d8eca0e707fe09dba4a6ab4e	7 years ago
Corey Farrell	3ed6abcc1f	Build System: Silence build of bundled jansson. ... Change-Id: I7392c79c0173057f5378010bf1fe65e300e8fc56	7 years ago
Corey Farrell	ab103d66db	Build System: Fix bundled jansson install. ... Update the bundled jansson Makefile to do nothing during Asterisk install, use a target that is not phony to initiate the jansson make and install. Change-Id: I7643cc3d39af9feba8fc0da676b646efc5f8b3bb	7 years ago
Corey Farrell	f36b4091f5	Enable bundling of jansson. ... Change-Id: Ib3111b151d37cbda40768cf2a8a9c6cf6c5c7cbd	7 years ago
Alexander Traud	6cf1aefff8	pjproject_bundled: Repair ./configure --with-ssl=PATH. ... Previously, Asterisk did not tell its bundled PJProject about this configure parameter. Therefore, PJProject used the platform provided OpenSSL always. ASTERISK-27880 Change-Id: Iea545aec854dd0e2c061c69bb118a76ce56c5dc6	7 years ago
Joshua Colp	00f9872dbd	Merge "res_pjsip: Remove spurious error logging when printing silent headers" into 13	7 years ago
Nick French	47572a5831	res_pjsip: Remove spurious error logging when printing silent headers ... Asterisk patched the pjproject source to avoid crashing when pjproject sip_msg headers are encountered with NULL vptr's, but the patch also output error messages for some valid headers which simply did not need to be added to the message itself, such as hidden route headers. pjproject has since applied a similar patch to their baseline to avoid crashes, but their version also avoids the spurious error logging. Lets use their patch instead. ASTERISK-27961 #close Change-Id: I2ddbd82c8da10e0dcc9807a48089d1f3c2d6e389	7 years ago
Richard Mudgett	c8ea924b50	Build: Fix modules getting their optimization setting overridden. ... Asterisk modules that use PJPROJECT services have their compiler optimization and possibly their symbolic debug options overridden by the PJPROJECT configure script selected settings. * We need to filter-out any -O and -g options in PJ_CFLAGS before echoing out the result so the PJPROJECT_INCLUDE variable does not override the Asterisk module settings when using bundled PJPROJECT. NOTE: This patch only has an effect when using bundled PJPROJECT. ASTERISK-27563 Change-Id: If124169735ecf572ad1535cd43bff94cb44d5b30	7 years ago
Alexander Traud	d739aa71f8	Bundled PJPROJECT: Disable internal connection oriented keep-alive. ... Turn off the periodic sending of CRLNCRLN. Default is on (90 seconds), which conflicts with the global section's keep_alive_interval option in pjsip.conf. patches: pjsip_keep_not_alive.patch submitted by Alexander Traud (License 6520) ASTERISK-27347 Change-Id: I6a197f56e1830d3b7e5ec70f17025840a290b057	7 years ago
George Joseph	06966e91fe	res_pjsip_session: Add ability to accept multiple sdp answers ... pjproject by default currently will follow media forked during an INVITE on outbound calls if the To tag is different on a subsequent response as that on an earlier response. We handle this correctly. There have been reported cases where the To tag is the same but we still need to follow the media. The pjproject patch in this commit adds the capability to sip_inv and also adds the capability to control it at runtime. The original "different tag" behavior was always controllable at runtime but we never did anything with it and left it to default to TRUE. So, along with the pjproject patch, this commit adds options to both the system and endpoint objects to control the two behaviors, and a small logic change to session_inv_on_media_update in res_pjsip_session to control the behavior at the endpoint level. The default behavior for "different tags" remains the same at TRUE and the default for "same tag" is FALSE. Change-Id: I64d071942b79adb2f0a4e13137389b19404fe3d6 ASTERISK-27936 Reported-by: Ross Beer	7 years ago
George Joseph	158c0efd4f	pjroject_bundled: Add already-destroyed check to tsx_timer_callback ... There have been cases that when the transaction timer callback is called the tsx is already destroyed. This causes a crash. We now check the tsx state and return if the tsx is already destroyed. Change-Id: If93acd5e48d9ca5bb553f2405d5afc836842fe1c	8 years ago
George Joseph	69c61237cd	pjproject_bundled: timer: Clean up usage of timer heap ... Added a new pj_timer_entry_reset function that resets a timer_entry for re-use. Changed direct settings of timer_entry fields to use pj_timer_entry_init and pj_timer_entry_reset. Fixed issues where timers were being rescheduled incorrectly. Change-Id: I5b624bfbc5c1429117484b9b24567293002148e6	8 years ago
George Joseph	c63a2e28f1	pjproject_bundled: Add patch for pj_atomic crashes ... There have been some crashes in the past where something attempts to use a pj_atomic after it's already been destroyed. This patch tries to prevent it by making sure that pj_atomic_destroy sets its mutex to NULL when it's done. The pj_mutex functions already check for a NULL mutex and just return PJ_EINVAL. Teluu also added some checks to the win32 implementation as well. Change-Id: Id25f70b79fdedf44ead6e6e1763a4417d3b3f825	8 years ago
Alexander Traud	06ba605988	BuildSystem: When no download utility is available, display the explanation. ... ./configure --with-pjproject-bundled did not display an explanation, when no download utility like wget, curl, or fetch was installed beforehand, although an explanation existed in code. This happened because the code expected the variable DOWNLOAD_TO_STDOUT to be empty. However, the script ./configure set that variable always. Change-Id: I64c99b76a03525c69471e5055bf124b36a51bbd4	8 years ago
Richard Mudgett	9ae427c7fd	res_pjproject.c: Upgrade bundled PJPROJECT to 2.7.2 ... Update patches included in bundled PJPROJECT for the new version. ASTERISK-27730 Change-Id: Id3c8c8ad82126846bcd9768bc3d0a18d89be8944	8 years ago
Kevin Harwell	55dc071950	Merge "AST-2018-003: Crash with an invalid SDP fmtp attribute" into 13	8 years ago
Kevin Harwell	05af43b240	AST-2018-003: Crash with an invalid SDP fmtp attribute ... pjproject's fmtp retrieval function failed to catch invalid fmtp attributes. Because of this Asterisk would crash if given an SDP with an invalid fmtp attribute. When retrieving the format this patch now makes sure the fmtp attribute is available. If not available it now returns an error status. ASTERISK-27583 #close Change-Id: I5cebe000ce2d846cae3af33b6d72c416e51caf2f	8 years ago
Kevin Harwell	c5dc2fb4ab	AST-2018-002: Crash with an invalid SDP media format description ... pjproject's media format parsing algorithm failed to catch invalid values. Because of this Asterisk would crash if given an SDP with a invalid media format description. When parsing the media format description this patch now properly parses the value and returns an error status if it can't successfully parse/convert the value. ASTERISK-27582 #close Change-Id: I883b3a4ef85b6972397f7b56bf46c5779c55fdd6	8 years ago
Alexander Traud	0ab97e9774	pjproject_bundled: Disable G.729 from Belledonne Communications. ... When <http://github.com/BelledonneCommunications/bcg729> is installed, PJProject tries to link that. Support for this bcg729 was added with PJProject 2.7. The issue happens, because Teluu enabled that new feature on default. ASTERISK-27584 Reported by: Stuart Henderson Change-Id: I88b6b18ad777bcfe2d8201187b4b90eec0a172a6	8 years ago
George Joseph	fbd0667c84	pjproject_bundled: Prevent crash on bad outgoing header ... We still need to figure out how a bad header is getting into the outgoing message but this patch to pjproject prevents attempting to print that header and causing a crash. For several users, this crash happens when sending 183 progress messages. ASTERISK-26832 Reported by: Ross Beer, Jan Rozhon Change-Id: Ie5c5a921c890c843587763e7f33f987dfe66bd16	8 years ago
Alexander Traud	659c44f5fb	BuildSystem: Really do not pass unknown-warning options to the compiler. ... When an older GCC version is called with a too new warning option, GCC exited with an error and Asterisk was not built. Therefore, the configure script tests the installed compiler whether it supports that warning option. If not, Asterisk does not pass it to the installed compiler. However, some compilers (like clang) do not exit (error) but give just a warning in such a case. Because the compiler did not exit, Asterisk passed the unknown-warning option. ASTERISK-27560 Change-Id: Ia9d148e689c173df4e91699113605dab2de36038	8 years ago
Sean Bright	ce3d56920b	Remove as much trailing whitespace as possible. ... Change-Id: I873c1c6d00f447269bd841494459efccdd2c19c0	8 years ago
Joshua Colp	7a68faeb1d	pjsip: Ignore state changes from old transactions. ... When we fail over to a new target we create a new transaction and it becomes the current INVITE transaction. This does not prevent the previous transaction from raising state changes and causing the session to be prematurely disconnected if a transport error occurs immediately. This change backports a fix from PJSIP that eliminates the incorrect state change and reduces when they would be raised in the first place. ASTERISK-27408 Change-Id: Id22d087591782eee31311753d11e7eca4b95ef34	8 years ago
Joshua Colp	41c14fd807	pjproject: Clean up disabling of WebRTC support. ... The definition in config_site.h and the argument to the configure script are not necessary to disable WebRTC support. The correct argument, --disable-libwebrtc, is already passed. ASTERISK-26980 Change-Id: I27da2c894f87914956a72710222e17462d8a44bc	8 years ago
Kevin Harwell	5abab0a34c	pjsip: 183 without To tag does not negotiate media ... If a 183 with sdp response is receive without a To tag the sdp is not negotiated. According to RFC 3261 section 12.1.2 while a To tag is required, the client needs to still be able to handle the missing tag case for backwards compatibility. This patch, accepted by and applied to pjproject, makes it so if an incoming 180/183 with SDP comes in without a To tag it gets appropriately handled. ASTERISK-27442 #close Change-Id: Ic9d6b01e05e8f4874eebbd7adfe05d932025d203	8 years ago
Joshua Colp	3d429a5072	Merge "BuildSystem: pjsip_evsub_set_uas_timeout was not used." into 13	8 years ago
Alexander Traud	50cb5199c1	BuildSystem: pjsip_evsub_set_uas_timeout was not used. ... ASTERISK-27435 Change-Id: Id318a7ae6d7d69b53f911d30bf3eece64852f15c	8 years ago
Corey Farrell	69113388e9	Build: Fix OSX build issues. ... OSX does not support 'readlink -f' or 'sed -r'. Replace readlink with the GNU make macro 'realpath'. Replace sed with grep in one place, cut in the other. ASTERISK-27332 Change-Id: I5d34ecca905384decb22ead45c913ae5e8aff748	8 years ago
Joshua Colp	e25ec49b62	Merge "bundled_pjproject: Update to 2.7.1" into 13	8 years ago
Jenkins2	57fe717471	Merge "bundled_pjproject: sip_parser: Fix return code in pjsip_find_msg" into 13	8 years ago
George Joseph	b5f2779a23	bundled_pjproject: sip_parser: Fix return code in pjsip_find_msg ... The default return code for pjsip_find_msg was PJ_SUCCESS so if a Content-Length header wasn't found at all, pjsip_find_msg was returning PJ_SUCCESS instead of PJSIP_EMISSINGHDR. Also added the volatile keyword to a few variables that are used both inside and outside the PJ_TRY/PJ_CATCH block. Partial fix for ASTERISK_27408 Change-Id: If82ba9de921e3d57df9c68cf96ee45ccc1491f7a	8 years ago