5301 Commits (b25c90e1f460ef36ab747504c3553a7829530d21)

Author	SHA1	Message	Date
George Joseph	b25c90e1f4	res_pjsip: Add new endpoint option "suppress_moh_on_sendonly" ... Normally, when one party in a call sends Asterisk an SDP with a "sendonly" or "inactive" attribute it means "hold" and causes Asterisk to start playing MOH back to the other party. This can be problematic if it happens at certain times, such as in a 183 Progress message, because the MOH will replace any early media you may be playing to the calling party. If you set this option to "yes" on an endpoint and the endpoint receives an SDP with "sendonly" or "inactive", Asterisk will NOT play MOH back to the other party. Resolves: #979 UserNote: The new "suppress_moh_on_sendonly" endpoint option can be used to prevent playing MOH back to a caller if the remote end sends "sendonly" or "inactive" (hold) to Asterisk in an SDP. (cherry picked from commit 1eb7d5258b)	5 months ago
George Joseph	8ed6423660	res_pjsip: Move tenantid to end of ast_sip_endpoint ... The tenantid field was originally added to the ast_sip_endpoint structure at the end of the AST_DECLARE_STRING_FIELDS block. This caused everything after it in the structure to move down in memory and break ABI compatibility. It's now at the end of the structure as an AST_STRING_FIELD_EXTENDED. Given the number of string fields in the structure now, the initial string field allocation was also increased from 64 to 128 bytes. Resolves: #982 (cherry picked from commit 5a335b880d)	5 months ago
George Joseph	86a78eab9c	res_pjsip_messaging.c: Mask control characters in received From display name ... Incoming SIP MESSAGEs will now have their From header's display name sanitized by replacing any characters < 32 (space) with a space. Resolves: #GHSA-2grh-7mhv-fcfw	5 months ago
Mike Bradeen	03b72fae96	res_pjsip_notify: add dialplan application ... Add dialplan application PJSIPNOTIFY to send either pre-configured NOTIFY messages from pjsip_notify.conf or with headers defined in dialplan. Also adds the ability to send pre-configured NOTIFY commands to a channel via the CLI. Resolves: #799 UserNote: A new dialplan application PJSIPNotify is now available which can send SIP NOTIFY requests from the dialplan. The pjsip send notify CLI command has also been enhanced to allow sending NOTIFY messages to a specific channel. Syntax: pjsip send notify <option> channel <channel> (cherry picked from commit 8e97266810)	1 year ago
Ben Ford	240597fb26	channel: Add multi-tenant identifier. ... This patch introduces a new identifier for channels: tenantid. It's a stringfield on the channel that can be used for general purposes. It will be inherited by other channels the same way that linkedid is. You can set tenantid in a few ways. The first is to set it in the dialplan with the Set and CHANNEL functions: exten => example,1,Set(CHANNEL(tenantid)=My tenant ID) It can also be accessed via CHANNEL: exten => example,2,NoOp(CHANNEL(tenantid)) Another method is to use the new tenantid option for pjsip endpoints in pjsip.conf: [my_endpoint] type=endpoint tenantid=My tenant ID This is considered the best approach since you will be able to see the tenant ID as early as the Newchannel event. It can also be set using set_var in pjsip.conf on the endpoint like setting other channel variable: set_var=CHANNEL(tenantid)=My tenant ID Note that set_var will not show tenant ID on the Newchannel event, however. Tenant ID has also been added to CDR. It's read-only and can be accessed via CDR(tenantid). You can also get the tenant ID of the last channel communicated with via CDR(peertenantid). Tenant ID will also show up in CEL records if it has been set, and the version number has been bumped accordingly. Fixes: #740 UserNote: tenantid has been added to channels. It can be read in dialplan via CHANNEL(tenantid), and it can be set using Set(CHANNEL(tenantid)=My tenant ID). In pjsip.conf, it is recommended to use the new tenantid option for pjsip endpoints (e.g., tenantid=My tenant ID) so that it will show up in Newchannel events. You can set it like any other channel variable using set_var in pjsip.conf as well, but note that this will NOT show up in Newchannel events. Tenant ID is also available in CDR and can be accessed with CDR(tenantid). The peer tenant ID can also be accessed with CDR(peertenantid). CEL includes tenant ID as well if it has been set. UpgradeNote: A new versioned struct (ast_channel_initializers) has been added that gets passed to __ast_channel_alloc_ap. The new function ast_channel_alloc_with_initializers should be used when creating channels that require the use of this struct. Currently the only value in the struct is for tenantid, but now more fields can be added to the struct as necessary rather than the __ast_channel_alloc_ap function. A new option (tenantid) has been added to endpoints in pjsip.conf as well. CEL has had its version bumped to include tenant ID. (cherry picked from commit 9ee00e0d60)	1 year ago
George Joseph	5283b32993	res_resolver_unbound: Test for NULL ub_result in unbound_resolver_callback ... The ub_result pointer passed to unbound_resolver_callback by libunbound can be NULL if the query was for something malformed like `.1` or `[.1]`. If it is, we now set a 'ns_r_formerr' result and return instead of crashing with a SEGV. This causes pjproject to simply cancel the transaction with a "No answer record in the DNS response" error. The existing "off nominal" unit test was also updated to check this condition. Although not necessary for this fix, we also made ast_dns_resolver_completed() tolerant of a NULL result. Resolves: GHSA-v428-g3cw-7hv9	1 year ago
Mike Bradeen	6b8d8a9823	res_stasis: fix intermittent delays on adding channel to bridge ... Previously, on command execution, the control thread was awoken by sending a SIGURG. It was found that this still resulted in some instances where the thread was not immediately awoken. This change instead sends a null frame to awaken the control thread, which awakens the thread more consistently. Resolves: #801 (cherry picked from commit f974ea2810)	1 year ago
George Joseph	a89e9ca13e	res_pjsip_config_wizard.c: Refactor load process ... The way we have been initializing the config wizard prevented it from registering its objects if res_pjsip happened to load before it. * We now use the object_type_registered sorcery observer to kick things off instead of the wizard_mapped observer. * The load_module function now checks if res_pjsip has been loaded already and if it was it fires the proper observers so the objects load correctly. Resolves: #816 UserNote: The res_pjsip_config_wizard.so module can now be reloaded. (cherry picked from commit 9e56766cde)	1 year ago
Sean Bright	72db4a9530	res_http_websocket.c: Set hostname on client for certificate validation. ... Additionally add a `assert()` to in the TLS client setup code to ensure that hostname is set when it is supposed to be. Fixes #433 (cherry picked from commit 178b2df38a)	1 year ago
George Joseph	4dcdded687	Fix incorrect application and function documentation references ... There were a few references in the embedded documentation XML where the case didn't match or where the referenced app or function simply didn't exist any more. These were causing 404 responses in docs.asterisk.org. (cherry picked from commit 0e0a56a0ca)	1 year ago
Sean Bright	c8d4ad1286	openssl: Supress deprecation warnings from OpenSSL 3.0 ... There is work going on to update our OpenSSL usage to avoid the deprecated functions but in the meantime make it possible to compile in devmode. Change-Id: Ib082eb8b3751f0185d8aa8fe127da664c93f0726	2 years ago
George Joseph	e5f3c646e5	chan_pjsip: Add PJSIPHangup dialplan app and manager action ... See UserNote below. Exposed the existing Hangup AMI action in manager.c so we can use all of it's channel search and AMI protocol handling without duplicating that code in dialplan_functions.c. Added a lookup function to res_pjsip.c that takes in the string represenation of the pjsip_status_code enum and returns the actual status code. I.E. ast_sip_str2rc("DECLINE") returns 603. This allows the caller to specify PJSIPHangup(decline) in the dialplan, just like Hangup(call_rejected). Also extracted the XML documentation to its own file since it was almost as large as the code itself. UserNote: A new dialplan app PJSIPHangup and AMI action allows you to hang up an unanswered incoming PJSIP call with a specific SIP response code in the 400 -> 699 range. (cherry picked from commit 8e012faf9e)	2 years ago
Mike Bradeen	3bacb722a8	res_speech: allow speech to translate input channel ... * Allow res_speech to translate the input channel if the format is translatable to a format suppored by the speech provider. Resolves: #129 UserNote: res_speech now supports translation of an input channel to a format supported by the speech provider, provided a translation path is available between the source format and provider capabilites. (cherry picked from commit db5767f19d)	2 years ago
Mike Bradeen	24c2aa50c9	res_stasis: signal when new command is queued ... res_statsis's app loop sleeps for up to .2s waiting on input to a channel before re-checking the command queue. This can cause delays between channel setup and bridge. This change is to send a SIGURG on the sleeping thread when a new command is enqueued. This exits the sleeping thread out of the ast_waitfor() call triggering the new command being processed on the channel immediately. Resolves: #362 UserNote: Call setup times should be significantly improved when using ARI. (cherry picked from commit 5342562892)	2 years ago
Mike Bradeen	d6592f038d	res_pjsip: update qualify_timeout documentation with DNS note ... The documentation on qualify_timeout does not explicitly state that the timeout includes any time required to perform any needed DNS queries on the endpoint. If the OPTIONS response is delayed due to the DNS query, it can still render an endpoint as Unreachable if the net time is enough for qualify_timeout to expire. Resolves: #352 (cherry picked from commit 7369de127a)	2 years ago
Sean Bright	f144a772fa	res_geolocation: Ensure required 'location_info' is present. ... Fixes #189 (cherry picked from commit 836f0bed18)	2 years ago
George Joseph	390a994e6c	res_rtp_asterisk: Fix regression issues with DTLS client check ... * Since ICE candidates are used for the check and pjproject is required to use ICE, res_rtp_asterisk was failing to compile when pjproject wasn't available. The check is now wrapped with an #ifdef HAVE_PJPROJECT. * The rtp->ice_active_remote_candidates container was being used to check the address on incoming packets but that container doesn't contain peer reflexive candidates discovered during negotiation. This was causing the check to fail where it shouldn't. We now check against pjproject's real_ice->rcand array which will contain those candidates. * Also fixed a bug in ast_sockaddr_from_pj_sockaddr() where we weren't zeroing out sin->sin_zero before returning. This was causing ast_sockaddr_cmp() to always return false when one of the inputs was converted from a pj_sockaddr, even if both inputs had the same address and port. Resolves: #500 Resolves: #503 Resolves: #505	2 years ago
Gitea	22ae979dfc	res_pjsip_header_funcs: Duplicate new header value, don't copy. ... When updating an existing header the 'update' code incorrectly just copied the new value into the existing buffer. If the new value exceeded the available buffer size memory outside of the buffer would be written into, potentially causing a crash. This change makes it so that the 'update' now duplicates the new header value instead of copying it into the existing buffer.	2 years ago
George Joseph	096819ec8a	res_rtp_asterisk.c: Check DTLS packets against ICE candidate list ... When ICE is in use, we can prevent a possible DOS attack by allowing DTLS protocol messages (client hello, etc) only from sources that are in the active remote candidates list. Resolves: GHSA-hxj9-xwr8-w8pq	2 years ago
Mike Bradeen	c4c0007b70	res_pjsip: disable raw bad packet logging ... Add patch to split the log level for invalid packets received on the signaling port. The warning regarding the packet will move to level 2 so that it can still be displayed, while the raw packet will be at level 4.	2 years ago
Mike Bradeen	9a4a097b37	res_musiconhold: avoid moh state access on unlocked chan ... Move channel unlock to after moh state access to avoid potential unlocked access to state. Resolves: #133	2 years ago
Ben Ford	aba7168abe	res_pjsip_session: Added new function calls to avoid ABI issues. ... Added two new functions (ast_sip_session_get_dialog and ast_sip_session_get_pjsip_inv_state) that retrieve the dialog and the pjsip_inv_state respectively from the pjsip_inv_session on the ast_sip_session struct. This is due to pjproject adding a new field to the pjsip_inv_session struct that caused crashes when trying to access fields that were no longer where they were expected to be if a module was compiled against a different version of pjproject. Resolves: #145	2 years ago
George Joseph	dda609c9df	res_pjsip_transport_websocket: Add remote port to transport ... When Asterisk receives a new websocket conenction, it creates a new pjsip transport for it and copies connection data into it. The transport manager then uses the remote IP address and port on the transport to create a monitor for each connection. However, the remote port wasn't being copied, only the IP address which meant that the transport manager was creating only 1 monitoring entry for all websocket connections from the same IP address. Therefore, if one of those connections failed, it deleted the transport taking all the the connections from that same IP address with it. * We now copy the remote port into the created transport and the transport manager behaves correctly. ASTERISK-30369 Change-Id: Ib506d40897ea6286455ac0be4dfbb0ed43b727e1	3 years ago
Joshua C. Colp	c20750bbaf	res_pjsip_transport_websocket: Also set the remote name. ... As part of PJSIP 2.11 a behavior change was done to require a matching remote hostname on an established transport for secure transports. Since the Websocket transport is considered a secure transport this caused the existing connection to not be found and used. We now set the remote hostname and the transport can be found. ASTERISK-30065 Change-Id: Ia1cdef33e1411f927985b4b852c95e163c080e94	3 years ago
Alexandre Fournier	646a9a7ec6	res_geoloc: fix NULL pointer dereference bug ... The `ast_geoloc_datastore_add_eprofile` function does not return 0 on success, it returns the size of the underlying datastore. This means that the datastore will be freed and its pointer set to NULL when no error occured at all. ASTERISK-30346 Change-Id: Iea9b209bd1244cc57b903b9496cb680c356e4bb9	3 years ago
George Joseph	dd76b53ca6	pjsip_transport_events: Fix possible use after free on transport ... It was possible for a module that registered for transport monitor events to pass in a pjsip_transport that had already been freed. This caused pjsip_transport_events to crash when looking up the monitor for the transport. The fix is a two pronged approach. 1. We now increment the reference count on pjsip_transports when we create monitors for them, then decrement the count when the transport is going to be destroyed. 2. There are now APIs to register and unregister monitor callbacks by "transport key" which is a string concatenation of the remote ip address and port. This way the module needing to monitor the transport doesn't have to hold on to the transport object itself to unregister. It just has to save the transport_key. * Added the pjsip_transport reference increment and decrement. * Changed the internal transport monitor container key from the transport->obj_name (which may not be unique anyway) to the transport_key. * Added a helper macro AST_SIP_MAKE_REMOTE_IPADDR_PORT_STR() that fills a buffer with the transport_key using a passed-in pjsip_transport. * Added the following functions: ast_sip_transport_monitor_register_key ast_sip_transport_monitor_register_replace_key ast_sip_transport_monitor_unregister_key and marked their non-key counterparts as deprecated. * Updated res_pjsip_pubsub and res_pjsip_outbound_register to use the new "key" monitor functions. NOTE: res_pjsip_registrar also uses the transport monitor functionality but doesn't have a persistent object other than contact to store a transport key. At this time, it continues to use the non-key monitor functions. ASTERISK-30244 Change-Id: I1a20baf2a8643c272dcf819871d6c395f148f00b	3 years ago
Joshua C. Colp	e50b2bfad9	res_agi: Respect "transmit_silence" option for "RECORD FILE". ... The "RECORD FILE" command in res_agi has its own implementation for actually doing the recording. This has resulted in it not actually obeying the option "transmit_silence" when recording. This change causes it to now send silence if the option is enabled. ASTERISK-30314 Change-Id: Ib3a85601ff35d1b904f836691bad8a4b7e957174	3 years ago
Mike Bradeen	1a72025c35	res_pjsip: prevent crash on websocket disconnect ... When a websocket (or potentially any stateful connection) is quickly created then destroyed, it is possible that the qualify thread will destroy the transaction before the initialzing thread is finished with it. Depending on the timing, this can cause an assertion within pjsip. To prevent this, ast_send_stateful_response will now create the group lock and add a reference to it before creating the transaction. While this should resolve the crash, there is still the potential that the contact will not be cleaned up properly, see:ASTERISK~29286. As a result, the contact has to 'time out' before it will be removed. ASTERISK-28689 Change-Id: Id050fded2247a04d8f0fc5b8a2cf3e5482cb8cee	3 years ago
Mike Bradeen	f107e4fd87	audiohook: add directional awareness ... Add enum to allow setting optional direction. If set to only one direction, only feed matching-direction frames to the associated slin factory. This prevents mangling the transcoder on non-mixed frames when the READ and WRITE frames would have otherwise required it. Also removes the need to mute or discard the un-wanted frames as they are no longer added in the first place. res_stasis_snoop is changed to use this addition to set direction on audiohook based on spy direction. If no direction is set, the ast_audiohook_init will init this enum to BOTH which maintains existing functionality. ASTERISK-30252 Change-Id: If8716bad334562a5d812be4eeb2a92e4f3be28eb	3 years ago
George Joseph	6e842ae100	res_geolocation: Update wiki documentation ... Also added a note to the geolocation.conf.sample file and added a README to the res/res_geolocation/wiki directory. Change-Id: I89c3c5db8c0701b33127993622d5e4f904bddfbc	3 years ago
Naveen Albert	29495aafce	res_pjsip_geolocation: Change some notices to debugs. ... If geolocation is not in use for an endpoint, the NOTICE log level is currently spammed with messages about this, even though nothing is wrong and these messages provide no real value. These log messages are therefore changed to debugs. ASTERISK-30241 #close Change-Id: I656b355d812f67cc0f0fdf09b00b0e1458598bb4	3 years ago
George Joseph	002272ad8b	res_geolocation: Fix issues exposed by compiling with -O2 ... Fixed "may be used uninitialized" errors in geoloc_config.c. ASTERISK-30234 Change-Id: I1ea336bf7abbc16fa59b75720f0db8f1d960b3d4	3 years ago
Mike Bradeen	fc2f8368e5	res_pjsip: Add user=phone on From and PAID for usereqphone=yes ... Adding user=phone to local-side uri's when user_eq_phone=yes is set for an endpoint. Previously this would only add the header to the To and R-URI. ASTERISK-30178 Change-Id: Id3bfb5d225d762e7d2668c023fe09e4541ae8600	3 years ago
George Joseph	3196ba7fcb	res_geolocation: Fix segfault when there's an empty element ... Fixed a segfault caused by var_list_from_loc_info() encountering an empty location info element. Fixed an issue in ast_strsep() where a value with only whitespace wasn't being preserved. Fixed an issue in ast_variable_list_from_quoted_string() where an empty value was considered a failure. ASTERISK-30215 Reported by: Dan Cropp Change-Id: Ieca64e061a6d9298f0196c694b60d986ef82613a	3 years ago
George Joseph	aeb465fdf1	res_geolocation: Add two new options to GEOLOC_PROFILE ... Added an 'a' option to the GEOLOC_PROFILE function to allow variable lists like location_info_refinement to be appended to instead of replacing the entire list. Added an 'r' option to the GEOLOC_PROFILE function to resolve all variables before a read operation and after a Set operation. Added a few missing parameters to the ones allowed for writing with GEOLOC_PROFILE. Fixed a bug where calling GEOLOC_PROFILE to read a parameter might actually update the profile object. Cleaned up XML documentation a bit. ASTERISK-30190 Change-Id: I75f541db43345509a2e86225bfa4cf8e242e5b6c	3 years ago
George Joseph	22fc2b58d2	res_geolocation: Allow location parameters on the profile object ... You can now specify the location object's format, location_info, method, location_source and confidence parameters directly on a profile object for simple scenarios where the location information isn't common with any other profiles. This is mutually exclusive with setting location_reference on the profile. Updated appdocsxml.dtd to allow xi:include in a configObject element. This makes it easier to link to complete configOptions in another object. This is used to add the above fields to the profile object without having to maintain the option descriptions in two places. ASTERISK-30185 Change-Id: Ifd5f05be0a76f0a6ad49fa28d17c394027677569	3 years ago
George Joseph	d6f6a30a49	res_geolocation: Add profile parameter suppress_empty_ca_elements ... Added profile parameter "suppress_empty_ca_elements" that will cause Civic Address elements that are empty to be suppressed from the outgoing PIDF-LO document. Fixed a possible SEGV if a sub-parameter value didn't have a value. ASTERISK-30177 Change-Id: I924ccc5aa2f45110a3155b22e53dfaf3ef2092dd	3 years ago
George Joseph	e9ae638978	res_geolocation: Add built-in profiles ... The trigger to perform outgoing geolocation processing is the presence of a geoloc_outgoing_call_profile on an endpoint. This is intentional so as to not leak location information to destinations that shouldn't receive it. In a totally dynamic configuration scenario however, there may not be any profiles defined in geolocation.conf. This makes it impossible to do outgoing processing without defining a "dummy" profile in the config file. This commit adds 4 built-in profiles: "<prefer_config>" "<discard_config>" "<prefer_incoming>" "<discard_incoming>" The profiles are empty except for having their precedence set and can be set on an endpoint to allow processing without entries in geolocation.conf. "<discard_config>" is actually the best one to use in this situation. ASTERISK-30182 Change-Id: I1819ccfa404ce59802a3a07ad1cabed60fb9480a	3 years ago
George Joseph	1bb1d3b5ef	res_geolocation: Address user issues, remove complexity, plug leaks ... * Added processing for the 'confidence' element. * Added documentation to some APIs. * removed a lot of complex code related to the very-off-nominal case of needing to process multiple location info sources. * Create a new 'ast_geoloc_eprofile_to_pidf' API that just takes one eprofile instead of a datastore of multiples. * Plugged a huge leak in XML processing that arose from insufficient documentation by the libxml/libxslt authors. * Refactored stylesheets to be more efficient. * Renamed 'profile_action' to 'profile_precedence' to better reflect it's purpose. * Added the config option for 'allow_routing_use' which sets the value of the 'Geolocation-Routing' header. * Removed the GeolocProfileCreate and GeolocProfileDelete dialplan apps. * Changed the GEOLOC_PROFILE dialplan function as follows: * Removed the 'profile' argument. * Automatically create a profile if it doesn't exist. * Delete a profile if 'inheritable' is set to no. * Fixed various bugs and leaks * Updated Asterisk WiKi documentation. ASTERISK-30167 Change-Id: If38c23f26228e96165be161c2f5e849cb8e16fa0	3 years ago
George Joseph	f08a172893	Geolocation: Wiki Documentation ... Change-Id: I68ba22db0a69d9e2eabcc2141b48a2395f7f1a23	3 years ago
George Joseph	5e3a2dd5b0	pjsip_config.xml: Fix omissions caused by wrong cherry-pick order ... When cherry-picking geolocation prerequisites to the certified/18.9 branch, the commit that moved res_pjsip documentation to separate XML files was cherry-picked after other that assumed it was already there. This caused a few configuration options to be dropped from the XML and prevented res_stir_shaken and some pjsip transports to fail to load. Those entries are now in their correct spots in pjsip_config.xml. A housekeeping change was also made to both pjsip_config.xml and pjsip_manager.xml to add stylesheet and namespace info. Change-Id: I0ea2eb191e006673f4fa3caafb2edbc92b3e1214	3 years ago
George Joseph	336209b319	geoloc_eprofile.c: Fix setting of loc_src in set_loc_src() ... line 196: loc_src = '\0'; should have been line 196: *loc_src = '\0'; The issue was caught by the gcc optimizer complaining that loc_src had a zero length because the pointer itself was being set to NULL instead of the _contents_ of the pointer being set to the NULL terminator. ASTERISK-30138 Reported-by: Sean Bright Change-Id: Id247be113cc8510f043ca053d5b4f5f3d32acd29	3 years ago
George Joseph	b17e95a792	Geolocation: chan_pjsip Capability Preview ... This commit adds res_pjsip_geolocation which gives chan_pjsip the ability to use the core geolocation capabilities. This commit message is intentionally short because this isn't a simple capability. See the documentation at https://wiki.asterisk.org/wiki/display/AST/Geolocation for more information. THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON USER FEEDBACK! ASTERISK-30128 Change-Id: Ie2e2bcd87243c2cfabc43eb823d4427c7086f4d9	3 years ago
George Joseph	547e3590ef	Geolocation: Core Capability Preview ... This commit adds res_geolocation which creates the core capabilities to manipulate Geolocation information on SIP INVITEs. An upcoming commit will add res_pjsip_geolocation which will allow the capabilities to be used with the pjsip channel driver. This commit message is intentionally short because this isn't a simple capability. See the documentation at https://wiki.asterisk.org/wiki/display/AST/Geolocation for more information. THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON USER FEEDBACK! ASTERISK-30127 Change-Id: Ibfde963121b1ecf57fd98ee7060c4f0808416303	3 years ago
George Joseph	4afe2355be	res_pjsip: Add utils for checking media types ... Added two new functions to assist checking media types... * ast_sip_are_media_types_equal compares two pjsip_media_types. * ast_sip_is_media_type_in tests if one media type is in a list of others. Added static definitions for commonly used media types to res_pjsip.h. Changed several modules to use the new functions and static definitions. ASTERISK_29813 (not ready to close) Change-Id: Ief77675235bd3bf00a6b095d4673fd878d0801b9	3 years ago
George Joseph	39b9607d4d	Makefile: Allow XML documentation to exist outside source files ... Moved the xmldoc build logic from the top-level Makefile into its own script "make_xml_documentation" in the build_tools directory. Created a new utility script "get_sourceable_makeopts", also in the build_tools directory, that dumps the top-level "makeopts" file in a format that can be "sourced" from shell sscripts. This allows scripts to easily get the values of common make build variables such as the location of the GREP, SED, AWK, etc. utilities as well as the AST* and library *_LIB and *_INCLUDE variables. Besides moving logic out of the Makefile, some optimizations were done like removing "third-party" from the list of subdirectories to be searched for documentation and changing some assignments from "=" to ":=" so they're only evaluated once. The speed increase is noticeable. The makeopts.in file was updated to include the paths to REALPATH and DIRNAME. The ./conifgure script was setting them but makeopts.in wasn't including them. So... With this change, you can now place documentation in any"c" source file AND you can now place it in a separate XML file altogether. The following are examples of valid locations: res/res_pjsip.c Using the existing /*** DOCUMENTATION ***/ fragment. res/res_pjsip/pjsip_configuration.c Using the existing /*** DOCUMENTATION ***/ fragment. res/res_pjsip/pjsip_doc.xml A fully-formed XML file. The "configInfo", "manager", "managerEvent", etc. elements that would be in the "c" file DOCUMENTATION fragment should be wrapped in proper XML. Example for "somemodule.xml": <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE docs SYSTEM "appdocsxml.dtd"> <docs> <configInfo> ... </configInfo> </docs> It's the "appdocsxml.dtd" that tells make_xml_documentation that this is a documentation XML file and not some other XML file. It also allows many XML-capable editors to do formatting and validation. Other than the ".xml" suffix, the name of the file is not significant. As a start... This change also moves the documentation that was in res_pjsip.c to 2 new XML files in res/res_pjsip: pjsip_config.xml and pjsip_manager.xml. This cut the number of lines in res_pjsip.c in half. :) Change-Id: I486c16c0b5a44d7a8870008e10c941fb19b71ade	3 years ago
Naveen Albert	bdcaf87bf2	documentation: Adds missing default attributes. ... The configObject tag contains a default attribute which allows the default value to be specified, if applicable. This allows for the default value to show up specially on the wiki in a way that is clear to users. There are a couple places in the tree where default values are included in the description as opposed to as attributes, which means these can't be parsed specially for the wiki. These are changed to use the attribute instead of being included in the text description. ASTERISK-29898 #close Change-Id: I9d7ea08f50075f41459ea7b76654906b674ec755	3 years ago
Sean Bright	65a63e534a	res_pjsip.c: Correct minor typos in 'realm' documentation. ... Change-Id: I886936b808def5540d40071321e72f6bfa19063a	3 years ago
Kevin Harwell	2074cf07f6	res_pjsip: allow TLS verification of wildcard cert-bearing servers ... Rightly the use of wildcards in certificates is disallowed in accordance with RFC5922. However, RFC2818 does make some allowances with regards to their use when using subject alt names with DNS name types. As such this patch creates a new setting for TLS transports called 'allow_wildcard_certs', which when it and 'verify_server' are both enabled allows DNS name types, as well as the common name that start with '*.' to match as a wildcard. For instance: *.example.com will match for: foo.example.com Partial matching is not allowed, e.g. f*.example.com, foo.*.com, etc... And the starting wildcard only matches for a single level. For instance: *.example.com will NOT match for: foo.bar.example.com The new setting is disabled by default. ASTERISK-30072 #close Change-Id: If0be3fdab2e09c2a66bb54824fca406ebaac3da4	3 years ago
George Joseph	c0612ccc28	GCC12: Fixes for 16+ ... Most issues were in stringfields and had to do with comparing a pointer to an constant/interned string with NULL. Since the string was a constant, a pointer to it could never be NULL so the comparison was always "true". gcc now complains about that. There were also a few issues where determining if there was enough space for a memcpy or s(n)printf which were fixed by defining some of the involved variables as "volatile". There were also a few other miscellaneous fixes. ASTERISK-30044 Change-Id: Ia081ca1bcfb329df6487c4660aaf1944309eb570	4 years ago