This change adds support for dual stack automatically. No
configuration is required and the IP address and version
in the SIP messages and SDP will be automatically changed
based on the transport over which the message is being
sent. RTP usage has also been changed to listen on both
IPv4 and IPv6 simultaneously to allow media to flow, and
to allow ICE support on both simultaneously. This also
allows failover between IPv6 and IPv4 to work as expected.
ASTERISK-26309 #close
Change-Id: I235a421d8f9a326606d861b449fa6fe3a030572d
cdr, config and voicemail are all separate alembic trees. Because
alembic's default is to use a table named 'alembic_version' to store
the current tree revision, the 3 trees can't exist in the same schema
without stepping on each other.
Now each tree uses 'alembic_version_<tree_name>' as the version table.
Each tree's env.py script now first checks for 'alembic_version'. If
it finds it AND its revision is in the tree's history, the script
renames it to 'alembic_version_<tree_name>'. Regardless, the script
then continues with the migration using 'alembic_version_<tree_name>'
and creates that table if it's not found. The result is that if an
existing 'alembic_version' table was found but it didn't belong to this
tree, it's left alone and 'alembic_version_<tree_name>' is used or
created.
WARNING: If multiple trees are using the same schema, they MUST NOT
CRU or D any objects with names that might exist in the other trees.
An example would be 'yesno_values' type. If two trees perform
operations on it, one tree could pull it out from under the other.
Thankfully we currently don't share any names among cdr, config and
voicemail.
NOTE: Since the env.py scripts in each tree were identical, a common
env.py has been placed in the ast-db-manage directory and a symlink
to it has been placed in each tree directory.
ASTERISK-24311 #close
Reported-by: Dafi Ni
Change-Id: I4d593f000350deb5d21a14fa1e9bc3896844d898
Map the sip.conf general section legacy_useroption_parsing to the
new pjsip.conf global ignore_uri_user_options.
ASTERISK-26316
Reported by: Kevin Harwell
Change-Id: I78108a31995db19d41f4e1a07b3324692c5363fc
This implements the chan_sip legacy_useroption_parsing option but with a
better name.
* Made the caller-id number and redirecting number strings obtained from
incoming SIP URI user fields always truncated at the first semicolon.
People don't care about anything after the semicolon showing up on their
displays even though the RFC allows the semicolon.
ASTERISK-26316 #close
Reported by: Kevin Harwell
Change-Id: Ib42b0e940dd34d84c7b14bc2e90d1ba392624f62
If you use the safe_asterisk script, it uses hardcoded defaults before
running configurable values from /etc/asterisk/startup.d. The hardcoded
default has TTY=9. Some containerized environments don't have such a
TTY, and safe_asterisk would stop.
The custom configuration from /etc/asterisk/startup.d/* isn't read until
after it stopped, so changing TTY in a custom config did not help.
This changeset changes safe_asterisk to continue if the TTY setting was
untouched and /dev/tty9 and /dev/vc/9 aren't found.
Change-Id: I2c7cdba549b77f418a0af4cb1227e8e6fe4148fc
This patch add config to pjsip by endpoint.
;preferred_codec_only=yes
; Respond to a SIP invite with the single most preferred codec
; rather than advertising all joint codec capabilities. This
; limits the other side's codec choice to exactly what we prefer.
ASTERISK-26317 #close
Reported by: AaronAn
Tested by: AaronAn
Change-Id: Iad04dc55055403bbf5ec050997aee2dadc4f0762
When using the migration script sip_to_pjsip.py, and your sip.conf is
configured with bindaddr=::, two transports are written to pjsip.conf, one for
0.0.0.0 (IPv4) and one for [::] (IPv6). That way, PJProject listens on the IPv4
and IPv6 wildcards; a IPv4/IPv6 Dual Stack configuration on a single interface
like in chan_sip.
Furthermore, the script internal functions "build_host" and "split_hostport"
did not parse Literal IPv6 addresses as expected (like [::1]:5060). This change
makes sure, even such addresses are parsed correctly.
ASTERISK-26309
Change-Id: Ia4799a0f80fc30c0550fc373efc207c3330aeb48
When using the migration script sip_to_pjsip.py, cert_file was not migrated to
pjsip.conf. A previous change regarding this contained a copy/paste error.
ASTERISK-22374
Change-Id: I0fa72e9412117d53b4284fc6b83fa5b2b95ba03b
A recent update had a copy/paste error where the unused variable 'val' was
being passed to the set_value function instead of the 'method' value itself.
This patch passes in the right variable.
ASTERISK-22374
Change-Id: I895b7b3779ce4442bc58b8ec40d59dd29bb43f06
When using the migration script sip_to_pjsip.py and tlsclientmethod is not set
in sip.conf, the default value of chan_sip (sslv23) is copied to pjsip.conf, to
overwrite the default of the PJProject (tlsv1). This makes sure, res_pjsip is
offering/using not just TLSv1.0 but TLSv1.2 as well.
ASTERISK-22374
Change-Id: Ie530a3dae9926ae14f3920a21be1e2edb15bda4f
When using the migration script sip_to_pjsip.py, no section of type=system or
type=general were created. Therefore the keys compactheaders, timerb, timert1,
and useragent were not migrated to pjsip.conf.
ASTERISK-22374
Change-Id: I318a453843227ea36bf130d392d4abd7bd26b5a1
When using the migration script sip_to_pjsip.py, session-timers=accept and
session-timers=refuse were mapped to wrong values.
ASTERISK-22374
Change-Id: Ie4e90d5f6a29aff07837b7fe5bc8aea5fb6fc092
When using the migration script sip_to_pjsip.py, now the (mandatory) username is
written to pjsip.conf, even if there was no (optional) authname in the register
string in sip.conf.
ASTERISK-22374
Change-Id: Ie53e1997104cd2674821688b8a8247249f5e156f
When using the migration script sip_to_pjsip.py and the register string
started with a transport in sip.conf - like tls://... - register was not parsed
correctly and therefore not migrated correctly to pjsip.conf.
ASTERISK-22374
Change-Id: I44c12104eea2bd8558ada6d25d77edfecd92edd2
When using the migration script sip_to_pjsip.py, those keys got missing. These
keys might appear several times and the function "merge_value" tried to collect
those. However, because these keys have different names in sip.conf and
pjsip.conf, "merge_value" was not able to find the new key name in sip.conf.
This change lets "merge_value" search with the old key name in sip.conf and
write with the new key name in pjsip.conf.
ASTERISK-22374
Change-Id: Ie53c5278ae6f1cb8fa7e96c5289877d46981d9d2
When using the migration script sip_to_pjsip.py, the externhost or externip of
sip.conf were erroneously written to Endpoints instead to Transports.
ASTERISK-22374
Change-Id: I2c5873386cfc388899fa9cf2368639dd12f1b8e4
When using the migration script sip_to_pjsip.py, defaultexpiry, maxexpiry, and
minexpiry were not migrated to pjsip.conf.
ASTERISK-22374
Change-Id: I007fbf543dcadc96fc3ed71c54da502bcb209b7b
When using the migration script sip_to_pjsip.py, encryption=yes got missing and
media_encryption=sdes was not written to pjsip.conf, because of a typo.
ASTERISK-22374
Change-Id: I0fc3e55dc512a57603ae0fef41baacccf2a35c05
When using the migration script sip_to_pjsip.py, both tos_sip and cos_sip got
missed, because of a typo. Therefore, cos and tos were not written to
pjsip.conf. Furthermore, that revealed a misuse of an internal function, caused
by a copy-and-paste error.
ASTERISK-22374
Change-Id: Id245ebadf70ab9776eb280c026288540af3af5c2
When using the migration script sip_to_pjsip.py, cert_file and ca_list_path were
not migrated to pjsip.conf.
ASTERISK-22374
Change-Id: I4612877d190b7f86a48698cefbf5c4db6c265825
contact_user, when specified on an endpoint, will override the user
portion of the Contact header on outgoing requests.
Change-Id: Icd4ebfda2f2e44d3ac749d0b4066630e988407d4
A new identify_by option was added recently, auth_username. However, this
setting was not added as an allowable choice in the database enumeration
value.
This patch updates the current enumeration, adding in the new setting.
ASTERISK-26268 #close
Change-Id: Ib4788e8485e4cd40172ec0abbf5810a147ab8bf8
The extensions table defined two columns (id and priority) as primary key
autoincrement columns. However only one is allowed when defining the primary
key.
This patch removes the autoincrement attribute from the priority column since
it does not need to be as such and really should not have been on there in the
first place.
This patch also removes 'context', 'exten', and 'priority' from the primary key
index and creates a new combined unique contraint index on them.
ASTERISK-26183 #close
Change-Id: Ib9c712c612a4d7ec1edb0dcb77f1bae0905a470b
The PJSIP taskprocessors could be overflowed on startup
if there are many (thousands) realtime endpoints
configured with unsolicited mwi.
The PJSIP stack could be totally unresponsive for a few minutes
after boot completed.
This patch creates a separate PJSIP serializers pool for mwi
and makes unsolicited mwi use serializers from this pool.
This patch also adds 2 new global options to tune taskprocessor
alert levels: 'mwi_tps_queue_high' and 'mwi_tps_queue_low'.
This patch also adds new global option 'mwi_disable_initial_unsolicited'
to disable sending unsolicited mwi to all endpoints on startup.
If disabled then unsolicited mwi will start processing
on next endpoint's contact update.
ASTERISK-26230 #close
Change-Id: I4c8ecb82c249eb887930980a800c9f87f28f861a
The regular expression would match causing the code that handled
the line if it was merely a comment to never get executed.
Change-Id: I3e4022481037ebcba9905587fe8c764b4ce21819
When configuring SIP URIs in the pjsip.conf file it is
necessary to escape the semicolon so the parser does not
treat it as a comment. This change allows this to work in
the astconfigparser implementation.
A secondary bug where some data was lost if a configuration
option included a "=" in its value was also fixed.
A bug where sections would be considered equal despite
being different has also been fixed.
Change-Id: If229f656ef22050b50e7b34e90c4bffe796431f8
sqlalchemy was complaining:
sqlalchemy.exc.IdentifierError: Identifier
'ps_contacts_qualifyfreq_exptime' exceeds maximum length of 30
characters
This fixes the problem by changing the index name to be
"ps_contacts_qualifyfreq_exp" instead.
ASTERISK-26227 #close
Reported by Mark Michelson
Change-Id: I0ed784f87504be2a59ee8d3242ef6f625d5ed1a9
The new endpoint option allows the PJSIP channel driver's fax_detect
endpoint option to timeout on a call after the specified number of
seconds into a call. The new feature is disabled if the timeout is set
to zero. The option is disabled by default.
ASTERISK-26214
Reported by: Richard Mudgett
Change-Id: Id5a87375fb2c4f9dc1d4b44c78ec8735ba65453d
Since 5th November 2014, the master branch of libSRTP changed the prefix of
several member names and is not compatible with the source code in Asterisk
anymore. Therefore instead, this change checks out the latest version of the
libSRTP 1.5.x branch. Furthermore now, libSRTP is compiled with OpenSSL as
backend. This makes AES-GCM and AES-IN possible.
ASTERISK-22131 #close
Change-Id: I2e396cdc01da0ff610686e398ed210ca7408f7d6
If specified, incoming SUBSCRIBE requests will be searched for the matching
extension in the indicated context. If no "subscribe_context" is specified,
then the "context" setting is used.
ASTERISK-25471 #close
Change-Id: I3fb7a15f5bc154079bd348c08b7ad1cdd2d5e514
The patch removes updating all Endpoints' status on startup.
Instead, only non-qualified aors with static contact
and non-qualified non-expired contacts are retrieved from the realtime to
update the endpoint status to ONLINE.
The endpoint name was added to the contact object to simply find the endpoint
that created this contact.
The status of endpoints with qualified aors will be updated by 'qualify'
functions.
ASTERISK-26061 #close
Change-Id: Id324c1776fa55d3741e0c5457ecac0304cb1a0df
A non-existent constraint was being referenced in the upgrade script.
This patch corrects the problem by removing the reference.
In addition, the head of the alembic branch referred to a non-existent
revision. This has been fixed by referring to the proper revision.
This patch fixes another realtime problem as well. Our Alembic scripts
store booleans as yes or no values. However, Sorcery tries to insert
"true" or "false" instead. This patch introduces a new boolean type that
translates to "yes" or "no" instead.
ASTERISK-26128 #close
Change-Id: I51574736a881189de695a824883a18d66a52dcef
The 81b01a191a46_pjsip_add_contact_reg_server.py script was attempting
to use UniqueConstraint and failing. It was not imported and after
importing it also continued to fail.
I've changed the script to use the explicit name of the constraint
instead.
Change-Id: I2438b0be90b7ce583b47dd27983c0c1a02cea5b9
As res_pjsip_nat rewrites contact's address, only the last Via header
can contain the source address of registered endpoint.
Also Call-Id header may contain the source address of registered
endpoint.
Added "via_addr", "via_port", "call_id" to contact.
Added new fields ViaAddress, CallID to AMI event ContactStatus.
ASTERISK-26011
Change-Id: I36bcc0bf422b3e0623680152d80486aeafe4c576
With the old SIP module we can use IP access controls per peer.
PJSIP module missing this feature.
This patch added next configuration Endpoint options:
"acl" - list of IP ACL section names in acl.conf
"deny" - List of IP addresses to deny access from
"permit" - List of IP addresses to permit access from
"contact_acl" - List of Contact ACL section names in acl.conf
"contact_deny" - List of Contact header addresses to deny
"contact_permit" - List of Contact header addresses to permit
This patch also better logging failed request:
add custom message instead of "No matching endpoint found"
add SIP method to logging
ASTERISK-25900
Change-Id: I456dea3909d929d413864fb347d28578415ebf02
This patch modified pjsip_options to retrieve only
permament contacts for aor if the qualify_frequency is > 0
and persisted contacts if the qualify_frequency is > 0.
This patch also fixed a bug in res_sorcery_astdb.
res_sorcery_astdb doesn't save object data retrived from astdb.
ASTERISK-25826
Change-Id: I1831fa46c4578eae5a3e574ee3362fddf08a1f05
For all OSes:
* Disabled third-party codecs in pjproject and added
'--disable-speex-codec --disable-speex-aec --disable-gsm-codec' to the
configure options since we don't use the pjsip codec capability.
FreeBSD:
* Added FreeBSD support to install_prereq.
* Changed pjproject/configure.m4 to use $GNU_MAKE instead of hardcoding "make".
* Added __progname and environ to asterisk.exports.in.
* Reverted the use of ldconfig to create shared library symlinks to ln.
* Only enable epoll in pjproject if `uname -s` is Linux.
* Added a patch to pjproject to take the name of the 'make' command from
an environment variable if supplied. This is needed for the python bindings.
(merged by Teluu into pjproject trunk 5/3/2016)
FreeBSD support isn't complete. Still some general issues regarding
make/gmake having nothing to do with pjproject. With some handholding it DOES
build successfully.
CentOS:
Added 'patch' and 'bzip2' to install_prereq PACKAGES_RH.
CentOS 6/7 32/64 build and run the pjsip testsuite successfully.
Ubuntu:
No changes required.
Ubuntu 15/16 32/64 build and run the pjsip testsuite successfully.
Debian:
No changes required.
Debian 6/7/8 32/64 build and run the pjsip testsuite successfully.
There will utimately be a follow-up patch to create an install_prereq for
the testsuite as I've discovered a few missing requirements.
ASTERISK-25968 #close
Change-Id: I5756a07facfc63798115a5e73a8709382fe9259c
If the Asterisk system name is set in asterisk.conf, it will be stored
into the "reg_server" field in the ps_contacts table to facilitate
multi-server setups.
ASTERISK-25931
Change-Id: Ia8f6bd2267809c78753b52bcf21835b9b59f4cb8
A feature of chan_sip that service providers relied upon was the ability to
identify by the Authorization username. This is most often used when customers
have a PBX that needs to register rather than identify by IP address. From my
own experiance, this is pretty common with small businesses who otherwise
don't need a static IP.
In this scenario, a register from the customer's PBX may succeed because From
will usually contain the PBXs account id but an INVITE will contain the caller
id. With nothing recognizable in From, the service provider's Asterisk can
never match to an endpoint and the INVITE just stays unauthorized.
The fixes:
A new value "auth_username" has been added to endpoint/identify_by that
will use the username and digest fields in the Authorization header
instead of username and domain in the the From header to match an endpoint,
or the To header to match an aor. This code as added to
res_pjsip_endpoint_identifier_user rather than creating a new module.
Although identify_by was always a comma-separated list, there was only
1 choice so order wasn't preserved. So to keep the order, a vector was added
to the end of ast_sip_endpoint. This is only used by res_pjsip_registrar
to find the aor. The res_pjsip_endpoint_identifier_* modules are called in
globals/endpoint_identifier_order.
Along the way, the logic in res_pjsip_registrar was corrected to match
most-specific to least-specific as res_pjsip_endpoint_identifier_user does.
The order is:
username@domain
username@domain_alias
username
Auth by username does present 1 problem however, the first INVITE won't have
an Authorization header so the distributor, not finding a match on anything,
sends a securty_alert. It still sends a 401 with a challenge so the next
INVITE will have the Authorization header and presumably succeed. As a result
though, that first security alert is actually a false alarm.
To address this, a new feature has been added to pjsip_distributor that keeps
track of unidentified requests and only sends the security alert if a
configurable number of unidentified requests come from the same IP in a
configurable amout of time. Those configuration options have been added to
the global config object. This feature is only used when auth_username
is enabled.
Finally, default_realm was added to the globals object to replace the hard
coded "asterisk" used when an endpoint is not yet identified.
The testsuite tests all pass but new tests are forthcoming for this new
feature.
ASTERISK-25835 #close
Reported-by: Ross Beer
Change-Id: I30ba62d208e6f63439600916fcd1c08a365ed69d
This patch added new global pjsip option 'disable_multi_domain'.
Disabling Multi Domain can improve Realtime performance by reducing
number of database requests.
ASTERISK-25930 #close
Change-Id: I2e7160f3aae68475d52742107949a799aa2c7dc7
Because SQLite doesn't support full ALTER capabilities, alembic scripts
require batch operations. However, that capability wasn't available until
0.7.0 which some distributions haven't reached yet. Therefore, the batch
operations introduced in commit 86d6e44cc (review 2319) have been reverted
and SQLite is unsupported again, for now anyway.
Tested the full upgrade and downgrade on MySQL/Mariadb and Postgresql.
ASTERISK-25890 #close
Reported-by: Harley Peters
Change-Id: I82eba5456736320256f6775f5b0b40133f4d1c80
check_installed_debs wasn't handling virtual packages like libsrtp-dev and
libresample-dev and on multiarch systems it was accidentally filtering out all
packages if any :i386 packages were found instead of just filtering out the
:i386 packages themselves.
Change-Id: Ifd68da0d1ee30cc84df14de3f9b9079d7c3cecda
res_pjsip_mwi was missing the chan_sip "vmexten" functionality which adds
the Message-Account header to the MWI NOTIFY. Also, specifying mailboxes
on endpoints for unsolicited mwi and on aors for subscriptions required
that the admin know in advance which the client wanted. If you specified
mailboxes on the endpoint, subscriptions were rejected even if you also
specified mailboxes on the aor.
Voicemail extension:
* Added a global default_voicemail_extension which defaults to "".
* Added voicemail_extension to both endpoint and aor.
* Added ast_sip_subscription_get_dialog for support.
* Added ast_sip_subscription_get_sip_uri for support.
When an unsolicited NOTIFY is constructed, the From header is parsed, the
voicemail extension from the endpoint is substituted for the user, and the
result placed in the Message-Account field in the body.
When a subscribed NOTIFY is constructed, the subscription dialog local uri
is parsed, the voicemail_extension from the aor (looked up from the
subscription resource name) is substituted for the user, and the result
placed in the Message-Account field in the body.
If no voicemail extension was defined, the Message-Account field is not added
to the NOTIFY body.
mwi_subscribe_replaces_unsolicited:
* Added mwi_subscribe_replaces_unsolicited to endpoint.
The previous behavior was to reject a subscribe if a previous internal
subscription for unsolicited MWI was found for the mailbox. That remains the
default. However, if there are mailboxes also set on the aor and the client
subscribes and mwi_subscribe_replaces_unsolicited is set, the existing internal
subscription is removed and replaced with the external subscription. This
allows an admin to configure mailboxes on both the endpoint and aor and allows
the client to select which to use.
ASTERISK-25865 #close
Reported-by: Ross Beer
Change-Id: Ic15a9415091760539c7134a5ba3dc4a6a1217cea
There were a number of places in the res_pjsip stack that were getting
all endpoints or all aors, and then filtering them locally.
A good example is pjsip_options which, on startup, retrieves all
endpoints, then the aors for those endpoints, then tests the aors to see
if the qualify_frequency is > 0. One issue was that it never did
anything with the endpoints other than retrieve the aors so we probably
could have skipped a step and just retrieved all aors. But nevermind.
This worked reasonably well with local config files but with a realtime
backend and thousands of objects, this was a nightmare. The issue
really boiled down to the fact that while realtime supports predicates
that are passed to the database engine, the non-realtime sorcery
backends didn't.
They do now.
The realtime engines have a scheme for doing simple comparisons. They
take in an ast_variable (or list) for matching, and the name of each
variable can contain an operator. For instance, a name of
"qualify_frequency >" and a value of "0" would create a SQL predicate
that looks like "where qualify_frequency > '0'". If there's no operator
after the name, the engines add an '=' so a simple name of
"qualify_frequency" and a value of "10" would return exact matches.
The non-realtime backends decide whether to include an object in a
result set by calling ast_sorcery_changeset_create on every object in
the internal container. However, ast_sorcery_changeset_create only does
exact string matches though so a name of "qualify_frequency >" and a
value of "0" returns nothing because the literal "qualify_frequency >"
doesn't match any name in the objset set.
So, the real task was to create a generic string matcher that can take a
left value, operator and a right value and perform the match. To that
end, strings.c has a new ast_strings_match(left, operator, right)
function. Left and right are the strings to operate on and the operator
can be a string containing any of the following: = (or NULL or ""), !=,
>, >=, <, <=, like or regex. If the operator is like or regex, the
right string should be a %-pattern or a regex expression. If both left
and right can be converted to float, then a numeric comparison is
performed, otherwise a string comparison is performed.
To use this new function on ast_variables, 2 new functions were added to
config.c. One that compares 2 ast_variables, and one that compares 2
ast_variable lists. The former is useful when you want to compare 2
ast_variables that happen to be in a list but don't want to traverse the
list. The latter will traverse the right list and return true if all
the variables in it match the left list.
Now, the backends' fields_cmp functions call ast_variable_lists_match
instead of ast_sorcery_changeset_create and they can now process the
same syntax as the realtime engines. The realtime backend just passes
the variable list unaltered to the engine. The only gotcha is that
there's no common realtime engine support for regex so that's been noted
in the api docs for ast_sorcery_retrieve_by_fields.
Only one more change to sorcery was done... A new config flag
"allow_unqualified_fetch" was added to reg_sorcery_realtime.
"no": ignore fetches if no predicate fields were supplied.
"error": same as no but emit an error. (good for testing)
"yes": allow (the default);
"warn": allow but emit a warning. (good for testing)
Now on to res_pjsip...
pjsip_options was modified to retrieve aors with qualify_frequency > 0
rather than all endpoints then all aors. Not only was this a big
improvement in realtime retrieval but even for config files there's an
improvement because we're not going through endpoints anymore.
res_pjsip_mwi was modified to retieve only endpoints with something in
the mailboxes field instead of all endpoints then testing mailboxes.
res_pjsip_registrar_expire was completely refactored. It was retrieving
all contacts then setting up scheduler entries to check for expiration.
Now, it's a single thread (like keepalive) that periodically retrieves
only contacts whose expiration time is < now and deletes them. A new
contact_expiration_check_interval was added to global with a default of
30 seconds.
Ross Beer reports that with this patch, his Asterisk startup time dropped
from around an hour to under 30 seconds.
There are still objects that can't be filtered at the database like
identifies, transports, and registrations. These are not going to be
anywhere near as numerous as endpoints, aors, auths, contacts however.
Back to allow_unqualified_fetch. If this is set to yes and you have a
very large number of objects in the database, the pjsip CLI commands
will attempt to retrive ALL of them if not qualified with a LIKE.
Worse, if you type "pjsip show endpoint <tab>" guess what's going to
happen? :) Having a cache helps but all the objects will have to be
retrieved at least once to fill the cache. Setting
allow_unqualified_fetch=no prevents the mass retrieve and should be used
on endpoints, auths, aors, and contacts. It should NOT be used for
identifies, registrations and transports since these MUST be
retrieved in bulk.
Example sorcery.conf:
[res_pjsip]
endpoint=config,pjsip.conf,criteria=type=endpoint
endpoint=realtime,ps_endpoints,allow_unqualified_fetch=error
ASTERISK-25826 #close
Reported-by: Ross Beer
Tested-by: Ross Beer
Change-Id: Id2691e447db90892890036e663aaf907b2dc1c67
This work-in-progress is the first step to being able to reliably
build Asterisk containers from the Asterisk source. I'm submitting
this based on feedback gained at AstriDevCon 2015.
Information about how to use this is provided in contrib/docker/README.md
and will result in a local Asterisk container being built right from
your source. I believe this can eventually be automated via
hub.docker.com.
Change-Id: Ifa070706d40e56755797097b6ed72c1e243bd0d1
RedHat/CentOS needs python-devel
Debian/Ubuntu needs automake, libsrtp-dev and python-dev
Ubuntu also needed libncurses5-dev for cmenuselect so while not
needed for pjproject, I adedd it anyway.
Change-Id: Idf5fa16e2d87c687439621507e122cb9461d7089
Downgrade had a few issues. First there was an errant 'update' statement in
add_auto_dtmf_mode that looks like it was a copy/paste error. Second, we
weren't cleaning up the ENUMs so subsequent upgrades on postgres failed
because the types already existed.
For sqlite... sqlite doesn't support ALTER or DROP COLUMN directly.
Fortunately alembic batch_operations takes care of this for us if we
use it so the alter and drops were converted to use batch operations.
Here's an example downgrade:
with op.batch_alter_table('ps_endpoints') as batch_op:
batch_op.drop_column('tos_audio')
batch_op.drop_column('tos_video')
batch_op.add_column(sa.Column('tos_audio', yesno_values))
batch_op.add_column(sa.Column('tos_video', yesno_values))
batch_op.drop_column('cos_audio')
batch_op.drop_column('cos_video')
batch_op.add_column(sa.Column('cos_audio', yesno_values))
batch_op.add_column(sa.Column('cos_video', yesno_values))
with op.batch_alter_table('ps_transports') as batch_op:
batch_op.drop_column('tos')
batch_op.add_column(sa.Column('tos', yesno_values))
# Can't cast integers to YESNO_VALUES, so dropping and adding is required
batch_op.drop_column('cos')
batch_op.add_column(sa.Column('cos', yesno_values))
Upgrades from base to head and downgrades from head to base were tested
repeatedly for postgresql, mysql/mariadb, and sqlite3.
Change-Id: I862b0739eb3fd45ec3412dcc13c2340e1b7baef8
The 'reload' mechanism actually involves closing the underlying
socket and calling the appropriate udp, tcp or tls start functions
again. Only outbound_registration, pubsub and session needed work
to reset the transport before sending requests to insure that the
pjsip transport didn't get pulled out from under them.
In my testing, no calls were dropped when a transport was changed
for any of the 3 transport types even if ip addresses or ports were
changed. To be on the safe side however, a new transport option was
added (allow_reload) which defaults to 'no'. Unless it's explicitly
set to 'yes' for a transport, changes to that transport will be ignored
on a reload of res_pjsip. This should preserve the current behavior.
Change-Id: I5e759850e25958117d4c02f62ceb7244d7ec9edf
A recent commit set qualify_timeout to Decimal which isn't supported.
This path corrects it to Float.
Change-Id: I038f5274ba8cb60f8518a5845ce448d49306aadf
Corrects the qualify_timeout column type from Integer to Decimal
ASTERISK-25686 #close
Reported-by: Marcelo Terres
Change-Id: I757d0e3c011ee9be6cd5abd48bc92441a405d3c8
Added new global option (regcontext) to pjsip. When set, Asterisk will
dynamically create and destroy a NoOp priority 1 extension
for a given endpoint who registers or unregisters with us.
ASTERISK-25670 #close
Reported-by: Daniel Journo
Change-Id: Ib1530c5b45340625805c057f8ff1fb240a43ea62
PJPROJECT has a function available to dump the compile time
options used when building the library.
* Add CLI "pjsip show buildopts" command.
* Update contrib/scripts/autosupport to get pjproject information.
Change-Id: Id93a6a916d765b2a2e5a1aeb54caaf83206be748
On a system with multiple ip addresses in the same subnet, if a
transport is bound to a specific ip address and endpoint/media_address
is set, the SIP/SDP will have the correct address in all fields but
the rtp stream MAY still originate from one of the other ip addresses,
most probably the "primary" ip address. This happens because
res_pjsip_sdp_rtp/create_rtp always calls ast_instance_new with
the "all" ip address (0.0.0.0 or ::).
The new option causes res_pjsip_sdp_rtp/create_rtp to call
ast_rtp_instance_new with the endpoint's media_address (if specified)
instead of the "all" address. This causes the packets to originate from
the specified address.
ASTERISK-25632
ASTERISK-25637
Reported-by: Olivier Krief
Reported-by: Dan Journo
Change-Id: I3dfaa079e54ba7fb7c4fd1f5f7bd9509bbf8bd88
The keep_alive_interval option was added about a year ago, but no
alembic revision was created to add the appropriate column to the
database.
This commit fixes the problem and adds the column. This was discovered
by running the testsuite with automatic conversion to realtime enabled.
Change-Id: If3ef92a7c4f4844d08f8aae170d2178aec5c4c1a
The spandspflow2pcap.py creates pcap files from fax.log files, generated
through 'fax set debug on' when receiving a fax. An example fax.log is
included as spandspflow2pcap.log.
The sipp-sendfax.xml SIPp scenario can be used to replay that fax with a
recent version of SIPp.
ASTERISK-25660 #close
Change-Id: I4de8f28b084055b482ab8a5b28d28b605b0ed526
When running the PJSIP AMI "show_endpoint" test with automatic
conversion to realtime, the test would fail. This was because the AOR
"contact" column was sized at 40, and the configured contact was larger
than that.
This commit increases the size of the contact column to 255 characters.
Change-Id: Ia65bc7fd37699b7c0eaef9629a1a31eab9a24ba1
This increases the maximum length of account code's to match
extensions. This ensures it is always possible to set an
accountcode to ${EXTEN} without truncation.
ASTERISK-23904
Reported by: Ben Merrills
Change-Id: If122602304ce03362722eb213a3111b32da5eeb9
When to install packages the indexed local is more old of the
version of software on the repository they have been upgraded by security
update then get the package will give 404 not found.
The patch prevent by update local index to repository for aptitude before
install.
ASTERISK-25495 #close
Reporte by: Rodrigo Ramírez Norambuena
Change-Id: I645959e553aac542805ced394cac2dca964051fa
During outbound registration it is possible to receive a fatal (any permanent/
non-temporary 4xx, 5xx, 6xx) response from the registrar that is simply due
to a problem with the registrar itself. Upon receiving the failure response
Asterisk terminates outbound registration for the given endpoint.
This patch adds an option, 'fatal_retry_interval', that when set continues
outbound registration at the given interval up to 'max_retries' upon receiving
a fatal response.
ASTERISK-25485 #close
Change-Id: Ibc2c7b47164ac89cc803433c0bbe7063bfa143a2
This patch adds some minor tweaks for autosupport to update it for Asterisk 13.
This includes:
* Finally removing most references to Zaptel
* Adding support for some additional 'core' commands, and fixing nomenclature
that generally hasn't been used for some time
* Adding some PJSIP/SIP commands to gather endpoints/peers and active channels
Change-Id: Ic997b418cbd9313588b6608e50f47b0ce6f4f1f1
(cherry picked from commit 9fc9777fa3)
To help in diagnosing mismatched modules and libraries, this
script scans for version, repository, and source information
and reports what is found.
ASTERISK-25376 #close
Reported by: Ashley Sanders
Change-Id: Ib0642d0fb96712476f59760d6d137a24633fe2d6
When Asterisk sends an outbound SIP request, if there is no direct
reason to place a specific value for the username in the From header,
Asterisk would generate a UUID. For example, this would happen when
sending outbound OPTIONS requests when qualifying or when sending
outbound INVITE requests when originating (if no explicit caller ID were
provided). The issue is that some SIP providers reject these sorts of
requests with a "Name too long" error response.
This patch aims to fix this by changing the default outbound username in
From headers to "asterisk". This value can be overridden by changing the
default_from_user option in the global options if desired.
ASTERISK-25377 #close
Reported by Mark Michelson
Change-Id: I6a4d34a56ff73ff4f661b0075aeba5461b7f3190
Joshua Colp
zuul
George Joseph
Rodrigo Ramírez Norambuena
Richard Mudgett
Walter Doekes
Aaron An
Alexander Traud
Kevin Harwell
Alexei Gradinari
Mark Michelson
George Joseph
Leif Madsen
Daniel Journo
Walter Doekes
Corey Farrell
Matt Jordan
Scott Griepentrog