asterisk

Commit Graph

Author	SHA1	Message	Date
Matthew Jordan	6258bbe7bd	Update Asterisk's CDRs for the new bridging framework This patch is the initial push to update Asterisk's CDR engine for the new bridging framework. This patch guts the existing CDR engine and builds the new on top of messages coming across Stasis. As changes in channel state and bridge state are detected, CDRs are built and dispatched accordingly. This fundamentally changes CDRs in a few ways. (1) CDRs are now very reflective of the actual state of channels and bridges. This means CDRs track well with what an actual channel is doing - which is useful in transfer scenarios (which were previously difficult to pin down). It does, however, mean that CDRs cannot be 'fooled'. Previous behavior in Asterisk allowed for CDR applications, channels, and other properties to be spoofed in parts of the code - this no longer works. (2) CDRs have defined behavior in multi-party scenarios. This behavior will not be what everyone wants, but it is a defined behavior and as such, it is predictable. (3) The CDR manipulation functions and applications have been overhauled. Major changes have been made to ResetCDR and ForkCDR in particular. Many of the options for these two applications no longer made any sense with the new framework and the (slightly) more immutable nature of CDRs. There are a plethora of other changes. For a full description of CDR behavior, see the CDR specification on the Asterisk wiki. (closes issue ASTERISK-21196) Review: https://reviewboard.asterisk.org/r/2486/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391947 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	d81c846724	Avoid unnecessary cleanups during immediate shutdown This patch addresses issues during immediate shutdowns, where modules are not unloaded, but Asterisk atexit handlers are run. In the typical case, this usually isn't a big deal. But the introduction of the Stasis message bus makes it much more likely for asynchronous activity to be happening off in some thread during shutdown. During an immediate shutdown, Asterisk skips unloading modules. But while it is processing the atexit handlers, there is a window of time where some of the core message types have been cleaned up, but the message bus is still running. Specifically, it's still running module subscriptions that might be using the core message types. If a message is received by that subscription in that window, it will attempt to use a message type that has been cleaned up. To solve this problem, this patch introduces ast_register_cleanup(). This function operates identically to ast_register_atexit(), except that cleanup calls are not invoked on an immediate shutdown. All of the core message type and topic cleanup was moved from atexit handlers to cleanup handlers. This ensures that core type and topic cleanup only happens if the modules that used them are first unloaded. This patch also changes the ast_assert() when accessing a cleaned up or uninitialized message type to an error log message. Message type functions are actually NULL safe across the board, so the assert was a bit heavy handed. Especially for anyone with DO_CRASH enabled. Review: https://reviewboard.asterisk.org/r/2562/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390122 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	9648e258c7	Refactored the rest of the message types to use the STASIS_MESSAGE_TYPE_* macros. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388751 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	e8015cc460	Convert TestEvent AMI events over to Stasis Core This patch migrates the TestEvent AMI events to first be dispatched over the Stasis-Core message bus. This helps to preserve the ordering of the events with other events in the AMI system, such as the various channel related events. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384389 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	32cb4ca542	Tweaked __ast_test_suite_assert_notify() and __ast_test_suite_event_notify() to be void functions. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378823 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	04501f0054	* Whitespace changes. * Made ast_test_init() match its prototype. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378790 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	4ccf2c7aa5	Add red-black tree container type to astobj2. * Add red-black tree container type. * Add CLI command "astobj2 container dump <name>" * Added ao2_container_dump() so the container could be dumped by other modules for debugging purposes. * Changed ao2_container_stats() so it can be used by other modules like ao2_container_check() for debugging purposes. * Updated the unit tests to check red-black tree containers. (closes issue ASTERISK-19970) Reported by: rmudgett Tested by: rmudgett Review: https://reviewboard.asterisk.org/r/2110/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376575 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	b83500ab61	Tweak unit test warning message. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370598 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	49a6b4935e	Fix some presence-state unit test typos. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370597 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kevin P. Fleming	166b4e2b30	Multiple revisions 369001-369002 ........ r369001 \| kpfleming \| 2012-06-15 10:56:08 -0500 (Fri, 15 Jun 2012) \| 11 lines Add support-level indications to many more source files. Since we now have tools that scan through the source tree looking for files with specific support levels, we need to ensure that every file that is a component of a 'core' or 'extended' module (or the main Asterisk binary) is explicitly marked with its support level. This patch adds support-level indications to many more source files in tree, but avoids adding them to third-party libraries that are included in the tree and to source files that don't end up involved in Asterisk itself. ........ r369002 \| kpfleming \| 2012-06-15 10:57:14 -0500 (Fri, 15 Jun 2012) \| 3 lines Add a script to enable finding source files without support-levels defined. ........ Merged revisions 369001-369002 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 369005 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369013 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kevin P. Fleming	9ee8a74461	Remove "asterisk/version.h" in favor of "asterisk/ast_version.h". A long time ago, in a land far far away, we added "asterisk/ast_version.h", which provides the ast_get_version() and ast_get_version_num() functions. These were added so that modules that needed the version information for the Asterisk instance they were loaded in could actually get it (as opposed the version that they were compiled against). We changed everything in the tree to use the new mechanism (although later main/test.c was added using the old method). However, the old mechanism was never removed, and as a result, new code is still trying to use it. This commit removes asterisk/version.h and replaces it with a header that will generate a compile-time error if you try to use it (the error message tells you which header you should use instead). It also removes the Makefile and build_tools bits that generated the file, and it updates main/test.c to use the 'proper' method of getting the Asterisk version information. This is an API change and thus is being committed for trunk only, but it's a fairly minor one and definitely improves the situation for out-of-tree modules. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352626 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	3b53a9cdb3	Merged revisions 332817 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r332817 \| mjordan \| 2011-08-22 13:15:51 -0500 (Mon, 22 Aug 2011) \| 4 lines Review: https://reviewboard.asterisk.org/r/1364/ This update adds a new AMI event, TestEvent, which is enabled when the TEST_FRAMEWORK compiler flag is defined. It also adds initial usage of this event to app_voicemail. The TestEvent AMI event is used extensively by the voicemail tests in the Asterisk Test Suite. ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332844 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Tilghman Lesher	da8450323f	Kill some startup warnings and errors and make some messages more helpful in tracking down the source. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@275105 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Russell Bryant	9aa4771a8d	Merged revisions 275021 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r275021 \| russell \| 2010-07-09 10:33:08 -0500 (Fri, 09 Jul 2010) \| 4 lines Document that a leading and trailing slash is expected for test categories. Also, emit a warning if a test is registered without one of these. ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@275022 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Russell Bryant	d9b1ff23ba	Put test output for a failure in a CDATA section in the XML results. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@254159 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Russell Bryant	3da9f8ed19	Resolve more compiler warnings on FreeBSD. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@253540 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Leif Madsen	0c5fb8037c	main/test.c reports erroneous CLI message. (closes issue #17051) Reported by: Nick_Lewis git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@253205 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
David Vossel	59f615dbca	Changes 0ms to <1ms in cli END results during 'test execute' git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250478 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
David Vossel	7b51d1d71d	fixes assumption that test failed if it did not pass when generating results git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250237 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
David Vossel	feae3dbbdf	adds Time field to "test show results" cli command git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@249186 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Mark Michelson	23d1c9186d	Fix a couple of bugs in test tab completion. 1. Add missing unlock of lists. 2. Swap order of arguments to test_cat_cmp in complete_test_name. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247381 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Mark Michelson	dd975726fc	Tab completion for test categories and names for "test show registered" and "test execute" CLI commands. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247380 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Russell Bryant	bbed34f764	Various updates to the unit test API. 1) It occurred to me that the difference in usage between the error ast_str and the ast_test_update_status() usage has turned out to be a bit ambiguous in practice. In a lot of cases, the same message was being sent to both. In other cases, it was only sent to one or the other. My opinion now is that in every case, I think it makes sense to do both; we should output it to the CLI as well as save it off for logging purposes. This change results in most of the changes in this diff, since it required changes to all existing unit tests. It also allowed for some simplifications of unit test API implementation code. 2) Update ast_test_status_update() to include the file, function, and line number for the code providing the update. 3) There are some formatting tweaks here and there. Hopefully they aren't too distracting for code review purposes. Reviewboard's diff viewer seems to do a pretty good job of pointing out when something is a whitespace change. 4) I moved the md5_test and sha1_test into the test_utils module. It seemed like a better approach since these tests are so tiny. 5) I changed the number of nodes used in heap_test_2 from 1 million to 100 thousand. The only reason for this was to reduce the time it took for this test to run. 6) Remove an unused function prototype that was at the bottom of utils.h. 7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one minor difference in behavior is that it no longer checks for a test registered with the same name. 8) Expand the code in test_alloc() to provide specific error messages for each failure case, to clearly inform developers if they forget to set the name, summary, description, etc. 9) Tweak the output of the "test show registered" CLI command. I swapped the name and category to have the category first. It seemed more natural since that is the sort key. 10) Don't output the status ast_str in the "test show results" CLI command. This is going to tend to be pretty verbose, so just leave that for the detailed test logs (test generate results). Review: https://reviewboard.asterisk.org/r/493/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Russell Bryant	2191c94336	Remove an extra space. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245268 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
David Vossel	6c0399452c	fix truncated format string in 'test show registered' When using the 'test show registered' cli command the 'Test Results' category was truncating the last few characters making it look like 'Test Resul'. I also expanded other parts of the format to better represent how long function names and categories will likely be. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@244688 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
David Vossel	adfa169e46	modify 'test show registered' cli output format In order to improve readability, the output from 'test show registered' has been modified to truncate fields to fit within the format output if they are over a certain length. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243242 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
David Vossel	d16b89be17	RFC compliant uri and display-name encode/decode 1. URI Encoding This patch changes ast_uri_encode()'s behavior when doreserved is enabled. Previously when doreserved was enabled only a small set of reserved characters were encoded. This set was comprised primarily of the reserved characters defined in RFC3261 section 25.1, but contained other characters as well. Rather than only escaping the reserved set, doreserved now escapes all characters not within the unreserved set as defined by RFC 3261 and RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char' in attempts to avoid confusion. When doreserve is not enabled, the previous logic of only encoding the characters <= 0X1F and > 0X7f remains, except for the '%' character, which must always be encoded as it signifies a HEX escaped character during the decode process. 2. URI Decoding: Break up URI before decode. In chan_sip.c ast_uri_decode is called on the entire URI instead of it's individual parts after it is parsed. This is not good as ast_uri_decode can introduce special characters back into the URI which can mess up parsing. This patch resolves this by not decoding a URI until parsing is completely done. There are many instances where we check to see if pedantic checking is enabled before we decode a URI. In these cases a new macro, SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI rather than constantly putting if (pedantic) { decode() } checks everywhere in the code. In the areas where ast_uri_decode is not dependent upon pedantic checking this macro is not used, but decoding is still moved to each individual part of the URI. The only behavior that should change from this patch is the time at which decoding occurs. Since I had to look over every place URI parsing occurs to create this patch, I found several places where we use duplicate code for parsing. To consolidate the code, those areas have updated to use the parse_uri() function where possible. 3. SIP display-name decoding according to RFC3261 section 25. To properly decode the display-name portion of a FROM header, chan_sip's get_calleridname() function required a complete re-write. More information about this change can be found in the comments at the beginning of this function. 4. Unit Tests. Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been written. This involved the addition of the test_utils.c file for testing the utils api. (closes issue #16299) Reported by: wdoekes Patches: astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717) get_calleridname_rewrite.diff uploaded by dvossel (license 671) Tested by: wdoekes, dvossel, Nick_Lewis Review: https://reviewboard.asterisk.org/r/469/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Russell Bryant	d6ad0f30b4	Update the doxygenification of some comments. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@242186 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Russell Bryant	e718ef4d45	Point to a useful reference on the XML output format. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241856 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Russell Bryant	efdbde9c25	Modify test results XML format to match the JUnit format. When this code was developed, we came up with our own XML format for the test output. I have since started looking at integration with other tools, namely continuous integration frameworks, and this format seems to be supported across a number of applications. With these changes in place, I was able to get Atlassian Bamboo to interpret the test results. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241855 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Sean Bright	1ad2999112	Fix spelling of 'category.' git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239111 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
David Vossel	73cb2d507b	Unit Test Framework API The Unit Test Framework is a new API that manages registration and execution of unit tests in Asterisk with the purpose of verifying the operation of C functions. The Framework consists of a single test manager accompanied by a list of registered test functions defined within the code. A test is defined, registered, and unregistered from the framework using a set of macros which allow the test code to only be compiled within asterisk when the TEST_FRAMEWORK flag is enabled in menuselect. This allows the test code to exist in the same file as the C functions it intends to verify. Registered tests may be viewed and executed via a set of new CLI commands. CLI commands are also present for generating and exporting test results into xml and txt formats. For more information and use cases please refer to the documentation provided at the beginning of the test.h file. Review: https://reviewboard.asterisk.org/r/447/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@236027 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago

32 Commits (b193c2873d27e15dfec521c7fef10411e8d1f5c8)