Previously, I had added the ast_sched_thread stuff that was a generic scheduler
thread implementation. However, if you used it, it required using different
functions for modifying scheduler contents. This patch reworks how this is
done and just allows you to optionally start a thread on the original scheduler
context structure that has always been there. This makes it trivial to switch
to the generic scheduler thread implementation without having to touch any of
the other code that adds or removes scheduler entries.
In passing, I made some naming tweaks to add ast_ prefixes where they were not
there before.
Review: https://reviewboard.asterisk.org/r/1007/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r298539 | tilghman | 2010-12-16 03:28:17 -0600 (Thu, 16 Dec 2010) | 8 lines
Ensure the ipaddr field in realtime is large enough to handle IPv6 addresses.
(closes issue #18464)
Reported by: IgorG
Patches:
realtime_ipv6store.diff uploaded by IgorG (license 20)
(plus a few additional lines by tilghman)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298545 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r298195 | rmudgett | 2010-12-13 11:11:43 -0600 (Mon, 13 Dec 2010) | 33 lines
Merged revisions 298194 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r298194 | rmudgett | 2010-12-13 11:04:41 -0600 (Mon, 13 Dec 2010) | 26 lines
Merged revisions 298193 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r298193 | rmudgett | 2010-12-13 10:56:07 -0600 (Mon, 13 Dec 2010) | 19 lines
Outgoing PRI/BRI calls cannot do DTMF triggered transfers.
Outgoing PRI/BRI calls cannot do DTMF triggered transfers if a PROCEEDING
message is not received. The debug output shows that the DTMF begin event
is seen, but the DTMF end event is missing. When the DTMF begin happens,
the call is muted so we now have one way audio (until a DTMF end event is
somehow seen).
* Made set the proceeding flag when the PRI_EVENT_ANSWER event is
received.
* Made absorb the DTMF begin and DTMF end events if we are overlap dialing
and have not seen a PROCEEDING message.
* Added a debug message when absorbing a DTMF event.
JIRA SWP-2690
JIRA ABE-2697
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298201 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r297965 | twilson | 2010-12-09 16:18:19 -0600 (Thu, 09 Dec 2010) | 28 lines
Merged revisions 297960 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r297960 | twilson | 2010-12-09 16:10:31 -0600 (Thu, 09 Dec 2010) | 21 lines
Merged revisions 297959 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r297959 | twilson | 2010-12-09 16:00:30 -0600 (Thu, 09 Dec 2010) | 14 lines
Ignore spurious REGISTER requests
If a REGISTER request with a Call-ID matching an existing transaction is received
it was possible that the REGISTER request would overwrite the initreq of the
private structure. This info is used to generate messages for other responses in
the transaction. This patch ignores REGISTER requests that match non-REGISTER
transactions.
(closes issue #18051)
Reported by: eeman
Tested by: twilson
Review: https://reviewboard.asterisk.org/r/1050/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@297972 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r297957 | dvossel | 2010-12-09 15:32:20 -0600 (Thu, 09 Dec 2010) | 11 lines
Fixes issue with outbound google voice calls not working.
Thanks to az1234 and nevermind_quack for their input in helping debug the issue.
(closes issue #18412)
Reported by: nevermind_quack
Patches:
fix uploaded by dvossel (license 671)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@297958 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r297607 | jpeeler | 2010-12-06 16:06:37 -0600 (Mon, 06 Dec 2010) | 25 lines
Merged revisions 297605 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r297605 | jpeeler | 2010-12-06 16:03:04 -0600 (Mon, 06 Dec 2010) | 18 lines
Merged revisions 297603 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r297603 | jpeeler | 2010-12-06 15:57:15 -0600 (Mon, 06 Dec 2010) | 12 lines
Improve handling of REGISTER requests with multiple contact headers.
The changes here attempt to more strictly follow RFC 3261 section 10.3.
Basically the following will now cause a 400 Bad Response to be returned, if:
- multiple Contact headers are present with one set to expire all bindings ("*")
- wildcard parameter is specified for Contact without Expires header or Expires
header is not set to zero.
ABE-2442
ABE-2443
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@297608 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r297075 | jpeeler | 2010-12-01 11:53:13 -0600 (Wed, 01 Dec 2010) | 37 lines
Merged revisions 297073 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r297073 | jpeeler | 2010-12-01 11:52:46 -0600 (Wed, 01 Dec 2010) | 30 lines
Merged revisions 297072 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r297072 | jpeeler | 2010-12-01 11:50:09 -0600 (Wed, 01 Dec 2010) | 23 lines
Fix not stopping MOH when transfered local channel queue member is answered.
The problem here is only present when local channels are used with the MOH
passthru option as well as no optimization (/nm). I will describe the slightly
bizarre scenario that was used to test, where phones B and C are queue members:
Phone A dials into a queue with two members using local channels and the above
options. Phone B answers. Phone A blind transfers phone B into the same queue.
Phone A hangs up. Phone C answers, but phone B didn't stop playing MOH.
In this scenario, the unhold frame that should have gotten to phone B never
arrived due to the masquerade from the blind transfer. This is usually fine
since app_queue manages the starting and stopping of MOH. However, with the
passthrough option enabled when app_queue attempts to stop MOH it tries to do
so on the local channel rather than the real channel. The easiest solution
was to just make sure to send an unhold frame during the transfer since it
wouldn't make sense to have MOH playing after a transfer anyway. This only
modifies SIP transfers, but the other transfers did not seem to be a problem.
If DTMF based transfers were a problem it might be okay to add ast_moh_stop
to finishup, but I didn't want to have to add that unless required.
ABE-2624
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@297076 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r296628 | russell | 2010-11-29 15:26:44 -0600 (Mon, 29 Nov 2010) | 6 lines
Complete some error handling in transmit_publish() in chan_sip.c.
This error handling block caught my eye. It was missing a couple of things,
but it should be safe now. Thanks to mmichelson for the quick peer review
on IRC.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296630 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r296582 | rmudgett | 2010-11-29 14:46:03 -0600 (Mon, 29 Nov 2010) | 24 lines
Merged revision 296575 from
https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
..........
r296575 | rmudgett | 2010-11-29 14:27:37 -0600 (Mon, 29 Nov 2010) | 13 lines
Invalid mISDN PTMP redirecting signaling as TE towards NT.
The mISDN PTMP redirection signaling (NOTIFY redirecting number and
notification code, SETUP redirecting number) is also sent in PTMP/TE mode.
It should only apply in PTMP/NT mode. The call setup proceeds but the
network (Deutsche Telekom) reacts with ugly ISDN STATUS messages.
Also don't send the redirecting number ie when PTP is also sending the
DivertingLegInformation2 facility. The redirecting number ie is redundant
and the network (Deutsche Telekom) complains about it.
Patches:
abe_2651_v4.patch uploaded by rmudgett (license 664)
JIRA ABE-2651
JIRA SWP-2537
..........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296585 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r296352 | marquis | 2010-11-26 13:19:02 -0500 (Fri, 26 Nov 2010) | 12 lines
Fix reloading of peer when a user is requested.
Prevent peer reloading from causing multiple MWI subscriptions to be created when using realtime. This had the effect of sending one NOTIFY for every time a sip peer made a call, in one case eventually overwhelming the phone and causing it to reboot.
(closes issue #18342)
Reported by: nivek
Patches:
issue0018342p1.patch uploaded by nivek (license 636)
Tested by: nivek
Review: https://reviewboard.asterisk.org/r/1029/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296353 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r296167 | rmudgett | 2010-11-24 16:49:48 -0600 (Wed, 24 Nov 2010) | 57 lines
Merged revisions 296166 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r296166 | rmudgett | 2010-11-24 16:42:45 -0600 (Wed, 24 Nov 2010) | 50 lines
Merged revisions 296165 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r296165 | rmudgett | 2010-11-24 16:41:07 -0600 (Wed, 24 Nov 2010) | 43 lines
Oneway audio to SIP phone from FXS port after FXS port gets a CallWaiting pip.
The FXS connected phone has to have CW/CID support to fail, as it will
send back a DTMF 'A' or 'D' when it's ready to receive CallerID. A normal
phone with no CID never fails. Also the SIP phone does not hear MOH when
the CW call is answered.
The DTMF end frame is suppressed when the phone acknowledges the CW signal
for CID. The problem is the DTMF begin frame needs to be suppressed as
well. The DTMF begin frame is causing SIP to start sending the DTMF RTP
frames. Since the DTMF end frame is suppressed, SIP will not stop sending
those DTMF RTP packets.
* Suppress the DTMF begin and end frames when the channel driver is
looking for DTMF digits.
* Fixed a couple issues caused by not cleaning up the CID spill if you
answer the CW call while it is sending the CID spill.
* Fixed not sending CW/CID spill to the phone when the call is natively
bridged. (Fixed by not using native bridge if CW/CID is possible.)
* Suppress received audio when sending CW/CID spills. The other parties
involved do not need to hear the CW/CID spills and may be confused if the
CW call is for them.
(closes issue #18129)
Reported by: alecdavis
Patches:
issue_18129_v1.8_v3.patch uploaded by rmudgett (license 664)
Tested by: alecdavis, rmudgett
NOTE:
* v1.4 does not have the main problem fixed by suppressing the DTMF start
frames. The other three items fixed are relevant.
* If you really must restore native bridging between analog ports, you
need to disable CW/CID either by configuring chan_dahdi.conf
callwaitingcallerid=no or dialing *70 before dialing the number to
temporarily disable CW.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296168 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r295747 | rmudgett | 2010-11-19 21:11:15 -0600 (Fri, 19 Nov 2010) | 13 lines
One way audio before answering call waiting call on analog port.
* Analog call waiting Caller ID spills could get stuck resulting in one
way audio until the waiting call is answered. This only happens on the
second (and later) call waiting call if the active call is not the first
call.
* The CLI/AMI "dahdi show channel" command could report the wrong channel
information.
Must keep the struct analog_pvt.owner and struct dahdi_pvt.owner pointer
in sync.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@295748 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r295516 | rmudgett | 2010-11-19 10:47:11 -0600 (Fri, 19 Nov 2010) | 13 lines
Bring sig_analog extraction more into alignment with orig-trunk/v1.6.2 chan_dahdi.
* Restore SMDI support.
* Fixed initial value of struct analog_pvt.use_callerid. It may get
forced on depending upon other config options.
* Call analog_dnd() instead of manual inlined code.
* Removed unused struct analog_pvt.usedistinctiveringdetection.
* Removed the struct analog_pvt.unknown_alarm flag. It was really the
struct analog_pvt.inalarm flag.
* Use ast_debug() instead of ast_log(LOG_DEBUG).
* Rename several function's index variable to idx.
* Some formatting tweaks.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@295517 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r294823 | rmudgett | 2010-11-11 20:45:22 -0600 (Thu, 11 Nov 2010) | 25 lines
Merged revisions 294822 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r294822 | rmudgett | 2010-11-11 20:44:12 -0600 (Thu, 11 Nov 2010) | 18 lines
Merged revisions 294821 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r294821 | rmudgett | 2010-11-11 20:41:13 -0600 (Thu, 11 Nov 2010) | 11 lines
Asterisk is getting a "No D-channels available!" warning message every 4 seconds.
Asterisk is just whining too much with this message: "No D-channels
available! Using Primary channel XXX as D-channel anyway!".
Filtered the message so it only comes out once if there is no D channel
available without an intervening D channel available period.
(closes issue #17270)
Reported by: jmls
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294824 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r294734 | jpeeler | 2010-11-11 15:58:25 -0600 (Thu, 11 Nov 2010) | 32 lines
Merged revisions 294733 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r294733 | jpeeler | 2010-11-11 15:57:22 -0600 (Thu, 11 Nov 2010) | 25 lines
Merged revisions 294688 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r294688 | jpeeler | 2010-11-11 15:12:27 -0600 (Thu, 11 Nov 2010) | 18 lines
Fix problem with qualify option packets for realtime peers never stopping.
The option packets not only never stopped, but if a realtime peer was not in
the peer list multiple options dialogs could accumulate over time. This
scenario has the potential to progress to the point of saturating a link just
from options packets. The fix was to ensure that the poke scheduler checks to
see if a peer is in the peer list before continuing to poke. The reason a peer
must be in the peer list to be able to properly manage an options dialog is
because otherwise the call pointer is lost when the peer is regenerated from
the database, which is how existing qualify dialogs are detected.
(closes issue #16382)
(closes issue #17779)
Reported by: lftsy
Patches:
bug16382-3.patch uploaded by jpeeler (license 325)
Tested by: zerohalo
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294735 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r294349 | rmudgett | 2010-11-09 10:55:32 -0600 (Tue, 09 Nov 2010) | 17 lines
Analog lines do not transfer CONNECTED LINE or execute the interception macros.
Add connected line update for sig_analog transfers and simplify the
corresponding sig_pri and chan_misdn transfer code.
Note that if you create a three-way call in sig_analog before transferring
the call, the distinction of the caller/callee interception macros make
little sense. The interception macro writer needs to be prepared for
either caller/callee macro to be executed. The current implementation
swaps which caller/callee interception macro is executed after a three-way
call is created.
Review: https://reviewboard.asterisk.org/r/996/
JIRA ABE-2589
JIRA SWP-2372
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294351 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r294125 | rmudgett | 2010-11-08 11:16:01 -0600 (Mon, 08 Nov 2010) | 33 lines
valgrind reported references to freed memory during a mISDN hangup collision.
Bad things have been happening in chan_misdn because the chan_misdn
channel private struct chan_list is not protected from reentrancy. Hangup
collisions have be causing read and write accesses to freed memory.
Converted chan_misdn struct chan_list to an ao2 object for its reference
counting feature.
**********
Removed an impediment to converting chan_list to an ao2 object.
The use of the other_ch member in chan_list is shaky at best. It is set
if the incoming and outgoing call legs are mISDN. The use of the other_ch
member goes against the Asterisk architecture and can even cause problems.
1) It is used to disable echo cancellation. This could be bad if the call
is forked and the winning call leg is not mISDN or the winning call leg is
not the last mISDN channel called by the fork. The other_ch would become
a dangling pointer.
2) It is used when the far end is alerting to hear the far end's inband
audio instead of Asterisk's generated ringback tone. This is bad if the
call is forked. You would only hear the last forked mISDN channel and it
may not be ringing yet.
The other_ch would become a dangling pointer if the call is later
transferred.
**********
JIRA SWP-2423
JIRA ABE-2614
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294127 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC3261 section 12 about dialog creation says an INVITE transaction
results in an established dialog once it receives the 200 OK response.
It is possible to receive multiple differing 200 OK responses for a
single outbound INVITE Request, and this should result in establishing
multiple dialogs.
This patch allows for all differing 200 OK responses to an INVITE request
to establish a separate dialog, but only the first dialog is kept. All other
resulting dialogs from the initial request are immediately ACKed and then
immediately terminated with a BYE request.
Review: https://reviewboard.asterisk.org/r/946/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294083 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r293803 | twilson | 2010-11-03 11:05:14 -0700 (Wed, 03 Nov 2010) | 25 lines
Avoid valgrind warnings for ast_rtp_instance_get_xxx_address
The documentation for ast_rtp_instance_get_(local/remote)_address stated that
they returned 0 for success and -1 on failure. Instead, they returned 0 if the
address structure passed in was already equivalent to the address instance
local/remote address or 1 otherwise. 90% of the calls to these functions
completely ignored the return address and passed in an uninitialized struct,
which would make valgrind complain even though the operation was technically
safe.
This patch fixes the documentation and converts the get_xxx_address functions
to void since all they really do is copy the address and cannot fail.
Additionally two new functions
(ast_rtp_instance_get_and_cmp_(local/remote)_address) are created for the 3
times where the return value was actually checked. The
get_and_cmp_local_address function is currently unused, but exists for the sake
of symmetry.
The only functional change as a result of this change is that we will not do an
ast_sockaddr_cmp() on (mostly uninitialized) addresses before doing the
ast_sockaddr_copy() in the get_*_address functions. So, even though it is an
API change, it shouldn't have a noticeable change in behavior.
Review: https://reviewboard.asterisk.org/r/995/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@293809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r293807 | rmudgett | 2010-11-03 13:35:19 -0500 (Wed, 03 Nov 2010) | 34 lines
Merged revisions 293806 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r293806 | rmudgett | 2010-11-03 13:31:57 -0500 (Wed, 03 Nov 2010) | 27 lines
Merged revisions 293805 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r293805 | rmudgett | 2010-11-03 13:23:04 -0500 (Wed, 03 Nov 2010) | 20 lines
Party A in an analog 3-way call would continue to hear ringback after party C answers.
All parties are analog FXS ports.
1) A calls B.
2) A flash hooks to call C.
3) A flash hooks to bring C into 3-way call before C answers. (A and B hear ringback)
4) C answers
5) A continues to hear ringback during the 3-way call. (All parties can hear each other.)
* Fixed use of wrong variable in dahdi_bridge() that stopped ringback on
the wrong subchannel.
* Made several debug messages have more information.
A similar issue happens if B and C are SIP channels. B continues to hear
ringback. For some reason this only affects v1.8 and trunk.
* Don't start ringback on the real and 3-way subchannels when creating the
3-way conference. Removing this code is benign on v1.6.2 and earlier.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@293808 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r293648 | rmudgett | 2010-11-02 16:29:25 -0500 (Tue, 02 Nov 2010) | 20 lines
Merged revisions 293647 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r293647 | rmudgett | 2010-11-02 16:26:30 -0500 (Tue, 02 Nov 2010) | 13 lines
Merged revisions 293639 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r293639 | rmudgett | 2010-11-02 16:24:13 -0500 (Tue, 02 Nov 2010) | 6 lines
Make warning message have more useful information in it.
Change "Unable to get index, and nullok is not asserted" to "Unable to get
index for '<channel-name>' on channel <number> (<function>(), line
<number>)".
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@293649 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r293530 | rmudgett | 2010-11-01 12:29:30 -0500 (Mon, 01 Nov 2010) | 10 lines
Analog 3-way call would not connect all parties if one was using sig_pri.
Also the "dahdi show channel" would not show the correct 3-way call
status.
* Synchronized the inthreeway flag between chan_dahdi and sig_analog.
* Fixed a my_set_linear_mode() sign error and made take an analog sub
channel enum.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@293531 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r293305 | jpeeler | 2010-10-29 16:48:38 -0500 (Fri, 29 Oct 2010) | 9 lines
Modify sip_setoption to not complain about unknown options.
This now behaves just like the other setoption callbacks. For the curious the
offending option for the reporter was AST_OPTION_CHANNEL_WRITE which was getting
passed due to a fix for chan_local in 286189.
(closes issue #17985)
Reported by: globalnetinc
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@293306 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r292868 | dvossel | 2010-10-25 14:07:50 -0500 (Mon, 25 Oct 2010) | 39 lines
Merged revisions 292867 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r292867 | dvossel | 2010-10-25 14:06:21 -0500 (Mon, 25 Oct 2010) | 32 lines
Merged revisions 292866 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r292866 | dvossel | 2010-10-25 14:05:07 -0500 (Mon, 25 Oct 2010) | 27 lines
This patch turns chan_local pvts into astobj2 objects.
chan_local does some dangerous things involving deadlock avoidance.
tech_pvt functions like hangup and queue_frame are provided with a
locked channel upon entry. Those functions are completely safe as
long as you don't attempt to give up that channel lock, but that is
impossible to guarantee due to the required deadlock avoidance necessary
to lock both the tech_pvt and both channels involved.
In the past, we have tried to account for this by doing things like
setting a "glare" flag that indicates what function should destroy the
pvt. This was used in local_hangup and local_queue_frame to decided
who should destroy the pvt if they collided in separate threads. I
have removed the need to do this by converting all chan_local tech_pvts
to astobj2. This means we can ref a pvt before deadlock avoidance
and not have to worry about that pvt possibly getting destroyed under
us. It also cleans up where we destroy the tech_pvt. The only unlink
from the tech_pvt container occurs in local_hangup now, which is where
it should occur.
Since there still may be thread collisions on some functions like
local_hangup after deadlock avoidance, I have added some checks to detect
those collisions and exit appropriately. I think this patch is going to
solve quite a bit of weirdness we have had with local channels in the past.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292869 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r292787 | lmadsen | 2010-10-22 16:28:43 -0500 (Fri, 22 Oct 2010) | 21 lines
Merged revisions 292786 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r292786 | lmadsen | 2010-10-22 16:16:12 -0500 (Fri, 22 Oct 2010) | 13 lines
Update the LDIF file for LDAP.
The LDIF file asterisk.ldif was quite a bit out of date from the asterisk.ldap-schema file, so I've
now updated that to be in sync. The asterisk.ldif file being out of sync was a problem on my systems
where I was doing an ldapadd to import the schema into the LDAP database, and the existing file
would cause problems and ERROR messages when registering.
Additional documention has been added based on feedback in the issue I'm closing.
(closes issue #13861)
Reported by: scramatte
Patches:
ldap-update.txt uploaded by lmadsen (license 10)
Tested by: lmadsen, jcovert, suretec, rgenthner
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292788 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292704 | rmudgett | 2010-10-22 10:47:08 -0500 (Fri, 22 Oct 2010) | 19 lines
Connected line is not updated when chan_dahdi/sig_pri or chan_misdn transfers a call.
When a call is transfered by ECT or implicitly by disconnect in sig_pri or
implicitly by disconnect in chan_misdn, the connected line information is
not exchanged. The connected line interception macros also need to be
executed if defined.
The CALLER interception macro is executed for the held call.
The CALLEE interception macro is executed for the active/ringing call.
JIRA ABE-2589
JIRA SWP-2296
Patches:
abe_2589_c3bier.patch uploaded by rmudgett (license 664)
abe_2589_v1.8_v2.patch uploaded by rmudgett (license 664)
Review: https://reviewboard.asterisk.org/r/958/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292705 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292489 | rmudgett | 2010-10-20 20:02:50 -0500 (Wed, 20 Oct 2010) | 7 lines
Send CONNECT_ACKNOWLEDGE for CIS calls too.
The originator of the Q.SIG call completion signaling link was not changed
to the active state when the CONNECT message came in. The T309 processing
would immediately kill the signaling link because it was not in the active
state.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292490 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292309 | twilson | 2010-10-19 12:27:32 -0700 (Tue, 19 Oct 2010) | 10 lines
Add sip show peer info about crypto and remove dated comment
This patch adds information about the encryption setting to 'sip show
peers' and removes an out-of-date comment from res_srtp.c and instead
directs users to the proper documentation.
(closes issue #18140)
Reported by: chodorenko
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292310 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r291827 | dvossel | 2010-10-14 16:27:42 -0500 (Thu, 14 Oct 2010) | 18 lines
Safer xml parsing, treat all clients the same, and better local candidate selection.
The gtalk channel driver was doing several unsafe operations
in regards to how it parsed incoming XML messages. I have cleaned
that code up so it should be much safer now.
We now treat all clients types the same. We have no reason to
distinguish between GMAIL and GOOGLE VOICE clients anymore because
they all work the same way.
I also modified how the local ip is found. If no bindaddress is provided
in the config file, we attempt to determine the local ip we
would use to connect to google.com. If that fails, then
we fall back to the ast_find_ourip() function as a last resort.
Using the new method makes it much less likely that we would ever
advertise a local RTP candidate as a loopback address.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291828 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r291758 | pabelanger | 2010-10-14 11:15:12 -0400 (Thu, 14 Oct 2010) | 11 lines
Add the ability for ast_find_ourip to return IPv4, IPv6 or both.
While testing chan_gtalk I noticed jabber was using my IPv6 address
and not IPv4. When using bindaddr=0.0.0.0 it is possible for ast_find_ourip()
to return both IPv6 and IPv4 results. Adding a family parameter gives you
the ablility to choose.
Since jabber/gtalk/h323 do not support IPv6, we should only return IPv4 results.
Review: https://reviewboard.asterisk.org/r/973/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291760 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r291656 | rmudgett | 2010-10-13 18:45:11 -0500 (Wed, 13 Oct 2010) | 34 lines
Merged revisions 291655 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r291655 | rmudgett | 2010-10-13 18:36:50 -0500 (Wed, 13 Oct 2010) | 27 lines
Merged revisions 291643 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r291643 | rmudgett | 2010-10-13 18:29:58 -0500 (Wed, 13 Oct 2010) | 20 lines
Deadlock between dahdi_exception() and dahdi_indicate().
There is a deadlock between dahdi_exception() and dahdi_indicate() for
analog ports. The call-waiting and three-way-calling feature can
experience deadlock if these features are trying to do something and an
event from the bridged channel happens at the same time.
Deadlock avoidance code added to obtain necessary channel locks before
attemting an operation with call-waiting and three-way-calling.
(closes issue #16847)
Reported by: shin-shoryuken
Patches:
issue_16847_v1.4.patch uploaded by rmudgett (license 664)
issue_16847_v1.6.2.patch uploaded by rmudgett (license 664)
issue_16847_v1.8_v2.patch uploaded by rmudgett (license 664)
Tested by: alecdavis, rmudgett
Review: https://reviewboard.asterisk.org/r/971/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291658 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r291541 | rmudgett | 2010-10-13 15:21:02 -0500 (Wed, 13 Oct 2010) | 26 lines
The chan_dahdi faxdetect option only works for the first FAX call.
The chan_dahdi faxdetect option only works for the first call. After that
the option no longer works. The struct dahdi_pvt.callprogress member is
the encoded user config setting for the callprogress and faxdetect config
options. Changing this value alters the configuration for all following
calls until the chan_dahdi.conf file is reloaded.
* Fixed the chan_dahdi ast_channel_setoption callback to not change the
users faxdetect config setting except for the current call.
* Fixed the chan_dahdi ast_channel_queryoption callback to read the active
DSP setting of the faxdetect option.
* Made actually disable the active faxdetect DSP setting for the current
call on the analog port. my_handle_dtmfup() is used for normal analog
ports. dahdi_handle_dtmfup() is the legacy code and is no longer used
unless in a radio mode.
(closes issue #18116)
Reported by: seandarcy
Patches:
issue18116_v1.8.patch uploaded by rmudgett (license 664)
Review: https://reviewboard.asterisk.org/r/972/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291542 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r291507 | rmudgett | 2010-10-13 14:01:48 -0500 (Wed, 13 Oct 2010) | 18 lines
Merged revision 291504 from
https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
..........
r291504 | rmudgett | 2010-10-13 13:30:21 -0500 (Wed, 13 Oct 2010) | 11 lines
Hold off ast_hangup() from destroying the ast_channel.
Must get the ast_channel lock before proceeding with release_chan() and
release_chan_early() to hold off ast_hangup() from destroying the
ast_channel.
Missed this change for -r291468.
JIRA ABE-2598
JIRA SWP-2317
..........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291508 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r291192 | dvossel | 2010-10-11 16:38:39 -0500 (Mon, 11 Oct 2010) | 19 lines
Gtalk enhancements and general code cleanup.
This patch includes several chan_gtalk enhancements.
Two new gtalk.conf options have been added, externip
and stunadd. Setting externip allows us to
manually specify what the external IP address is
outside of a NAT environment. Setting the stunaddr
option to a valid stun server allows for that external
ip to be retrieved via a STUN server automatically. This
external IP is then advertised during call setup as
a possible candidate.
I have also attempted to clean up chan_gtalk's code
so it meets our coding guidelines. During this cleanup
I noticed several things that need to be done in the
code and made a TODO section at the top of the file.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291193 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r290973 | dvossel | 2010-10-08 15:44:59 -0500 (Fri, 08 Oct 2010) | 12 lines
Make outbound Google Voice calls.
This patch allows for outbound Google Voice calls to be
dialed from Asterisk using chan_gtalk. Below is an example
dialstring.
exten -> blah,1,Dial(Gtalk/asterisk/+15552225555@voice.google.com,,)
In this example, 'asterisk' is the jabber.conf profile configured
to connect to your gmail account. In order to receive Google Voice
calls make sure to enable 'allowguest=yes' in gtalk.conf.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@290974 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r290829 | dvossel | 2010-10-07 17:38:05 -0500 (Thu, 07 Oct 2010) | 6 lines
Add Philippe Sultan to chan_gtalk author list.
Philippe has made some notable contributions to the
gtalk channel driver. His name deserves to be listed
amoung the authors of that file. Thanks Philippe!
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@290831 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r290648 | dvossel | 2010-10-06 16:08:19 -0500 (Wed, 06 Oct 2010) | 12 lines
Fixes gtalk outbound DTMF to work properly.
Outbound DTMF with gtalk needs to be done within the RTP stream. I discovered
this after investigating a packet capture from the gmail client. Instead of
performing jingle signaling DTMF, the gtalk servers expect all DTMF to arrive
on the RTP stream using RFC2833 way of doing things. Chan_gtalk also had an issue
with negotiating RTP payload type 106 for the telephony-event and then sending
DTMF as payload 101. This has been resolved by always negotiating 101 as the payload
type like we do everywhere else. With this patch, incoming google voice calls forwarded
to Asterisk via gtalk work.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@290649 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r289840 | jpeeler | 2010-10-01 21:43:45 -0500 (Fri, 01 Oct 2010) | 29 lines
Merged revisions 289798 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r289798 | jpeeler | 2010-10-01 18:01:31 -0500 (Fri, 01 Oct 2010) | 22 lines
Merged revisions 289797 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r289797 | jpeeler | 2010-10-01 17:58:38 -0500 (Fri, 01 Oct 2010) | 15 lines
Change RFC2833 DTMF event duration on end to report actual elapsed time.
The scenario here is with a non P2P early media session. The reported time
length of DTMF presses are coming up short when sending to the remote side.
Currently the event duration is a running total that is incremented when sending
continuation packets. These continuation packets are only triggered upon
incoming media from the remote side, which means that the running total probably
is not going to end up matching the actual length of time Asterisk received
DTMF. This patch changes the end event duration to be lengthened if it is
detected that the end event is going to come up short.
Review: https://reviewboard.asterisk.org/r/957/
ABE-2476
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@289841 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r289701 | jpeeler | 2010-10-01 11:22:19 -0500 (Fri, 01 Oct 2010) | 28 lines
Merged revisions 289700 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r289700 | jpeeler | 2010-10-01 11:21:04 -0500 (Fri, 01 Oct 2010) | 21 lines
Merged revisions 289699 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r289699 | jpeeler | 2010-10-01 11:20:00 -0500 (Fri, 01 Oct 2010) | 14 lines
Ensure user portion of SIP URI matches dialplan when using encoded characters.
This commit takes a simliar approach to 288112 and checks the dialplan to
determine the proper action for an incoming contact header as to whether or not
it should be decoded or not. sip_new was blindly always decoding the extension,
which also caused the outgoing contact header to be incorrect as well as failing
to match the encoded extension in the dialplan.
(closes issue #17892)
Reported by: wdoekes
Patches:
bug17892-1.patch uploaded by jpeeler (license 325)
Tested by: wdoekes
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@289702 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On every incoming subscribe there is a iteration through all dialogs to find old subscribes and delete them. This is slow and not RFC conform. This was only needed in 1.2 cause a subscribe was not deleted when a dialog was destroyed, after 1.4 a subscribe get removed when its dialog is destroyed.
Review: https://reviewboard.asterisk.org/r/901/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@289623 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r289549 | rmudgett | 2010-09-30 14:28:36 -0500 (Thu, 30 Sep 2010) | 17 lines
Merged revision 289547 from
https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
..........
r289547 | rmudgett | 2010-09-30 14:16:36 -0500 (Thu, 30 Sep 2010) | 10 lines
In chan_misdn, the DivertingLegInformation2 DivertingNr is garbage when the number is restricted.
The same thing happens with DivertingLegInformation1 DivertedTo number.
The misdn_PresentedNumberUnscreened_extract() extracted the Unscreened
PartyNumber field unconditionally. It now checks the presented number
unscreened type to see if the PartyNumber was even present.
JIRA ABE-2595
..........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@289552 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r288194 | rmudgett | 2010-09-21 19:06:21 -0500 (Tue, 21 Sep 2010) | 40 lines
Merged revisions 288193 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r288193 | rmudgett | 2010-09-21 19:03:37 -0500 (Tue, 21 Sep 2010) | 33 lines
Merged revisions 288192 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r288192 | rmudgett | 2010-09-21 18:55:58 -0500 (Tue, 21 Sep 2010) | 26 lines
In chan_iax2.c:schedule_delivery() calls ast_bridged_channel() on an unlocked channel.
Near the beginning of schedule_delivery(), ast_bridged_channel() is called
on iaxs[fr->callno]->owner. However, the channel is not locked, which can
result in ast_bridged_channel() crashing should owner->tech change to a
technology that doesn't implement bridged_channel.
I also fixed the other calls to ast_bridged_channel() in chan_iax2.c since
the owner lock was not held there either.
Converted the existing channel deadlock avoidance to use
iax2_lock_owner(). Using the new function simplified some awkward code.
In the process of fixing the locking on ast_bridged_channel(), I also
found a memory leak in socket_process() for v1.6.2 and v1.8. The local
struct variable ies.vars is not freed on early/abnormal function exits.
(closes issue #17919)
Reported by: rain
Patches:
issue17919_v1.4.patch uploaded by rmudgett (license 664)
issue17919_w_leak_v1.6.2.patch uploaded by rmudgett (license 664)
issue17919_w_leak_v1.8.patch uploaded by rmudgett (license 664)
Review: https://reviewboard.asterisk.org/r/926/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@288195 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r288159 | tilghman | 2010-09-21 17:57:22 -0500 (Tue, 21 Sep 2010) | 29 lines
Merged revisions 288113 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r288113 | tilghman | 2010-09-21 16:59:46 -0500 (Tue, 21 Sep 2010) | 22 lines
Merged revisions 288112 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r288112 | tilghman | 2010-09-21 16:58:13 -0500 (Tue, 21 Sep 2010) | 15 lines
Try both the encoded and unencoded subscription URI for a match in hints.
When a phone sends an encoded URI for a subscription, the URI is not matched
with the actual hint that is in decoded format. For example, if we have an
extension with a hint that is named: "#5601" or "*5601", the subscription will
work fine if the phone subscribes with an already decoded URI, but when it's
decoded like "%255601" or "%2A5601", Asterisk is unable to match it with the
correct hint.
(closes issue #17785)
Reported by: ramonpeek
Patches:
20100831__issue17785.diff.txt uploaded by tilghman (license 14)
Tested by: ramonpeek
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@288160 65c4cc65-6c06-0410-ace0-fbb531ad65f3
adding two dialog container, one for dialogs which need destroy, another for rtptimeout checks.
both container will be checked on every loop of do_monitor instead of iterate through all dialogs.
(closes issue #17912)
Reported by: schmidts
Tested by: schmidts
Review: https://reviewboard.asterisk.org/r/917/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@288063 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r287683 | rmudgett | 2010-09-20 18:14:42 -0500 (Mon, 20 Sep 2010) | 9 lines
The inalarm flag was not set in sig_analog struct if the port is initially in alarm.
Fixed initial inalarm value for sig_analog ports.
Along with -r261007, this gets the inalarm flag in sync with chan_dahdi
for sig_analog ports.
(closes issue #16983)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@287693 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r287017 | rmudgett | 2010-09-15 15:53:38 -0500 (Wed, 15 Sep 2010) | 65 lines
Merged revision 287014 from
https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
..........
r287014 | rmudgett | 2010-09-15 15:32:24 -0500 (Wed, 15 Sep 2010) | 58 lines
The handling of call transfer signaling for mISDN PTMP is not fully implemented.
The handling of call transfer signaling for mISDN PTMP is not fully
implemented. The signaling of number updates with ISDN/DSS1 ECT
supplementary services (ETS 300 369-1) comes along with a notification
indicator IE and redirection number IE for PTMP. The implementation in
the current Asterisk mISDN channel unfortunately can handle these
information elements only in a NOTIFY message. These information elements
are also signaled in a FACILTY message with a RequestSubaddress facility,
when the subscriber is already in the active state (see 9.2.4 and 9.2.5 of
ETS 300 369-1).
**********
abe_2526_ast.patch
* Added support to handle the notification indicator IE and redirection
number IE with the RequestSubaddress facility.
* Made misdn_update_connected_line() send a NOTIFY message if Asterisk
originated the call and it is not connected yet.
* Made misdn_update_connected_line() send a FACILITY message if the call
is already connected.
This patch requires the presence of the associated mISDN patches to
compile. I had to enhance mISDN to allow the notification indicator IE
and the redirection number IE to be used with a FACILITY message. Earlier
versions of the Digium enhanced mISDN are no longer going to work.
**********
abe_2526_misdn.patch
* Made an incoming FACILITY message allow the presence of the notification
indicator IE and the redirection number IE.
**********
abe_2526_misdnuser_v3.patch
* Added support to send and receive a FACILITY message with the
notification indicator IE and the redirection number IE.
* Added the ability to send a NOTIFY message in PTMP/NT mode to all
responding subcalls in Q.931 states 6, 7, 8, 9, and 25.
**********
Patches:
abe_2526_ast.patch uploaded by rmudgett (license 664)
abe_2526_misdn.patch uploaded by rmudgett (license 664)
abe_2526_misdnuser_v3.patch uploaded by rmudgett (license 664)
Tested by: rmudgett and reporter
JIRA SWP-2146
JIRA ABE-2526
..........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@287018 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r286931 | jpeeler | 2010-09-15 14:22:15 -0500 (Wed, 15 Sep 2010) | 16 lines
Add parking extension for non-default parking lots.
This is a new feature that allows for parking to custom parking lots to be
accessed directly, rather than with channel variables or by changing the
default parking lot. The extension is set with the parkext option just as the
default parking lot is done. Also, the manager action has been updated to
optionally allow a specified parking lot.
(closes issue #14882)
Reported by: vmikhnevych
Patches:
patch_14882.txt uploaded by mnick (license 874)
modified by me
Review: https://reviewboard.asterisk.org/r/884/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@286939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r286904 | rmudgett | 2010-09-15 13:28:05 -0500 (Wed, 15 Sep 2010) | 12 lines
Unable to originate calls using E&M over T1.
When originating a call from Unit Under Test to Reference Unit using E&M
RBS signaling mode, I get the following warning message: "Ring/Off-hook in
strange state 3 on channel 1".
Fixed the sig_analog outgoing flag. It was never set when sig_analog was
extracted from chan_dahdi.
JIRA SWP-2191
JIRA AST-408
........
r286905 | rmudgett | 2010-09-15 13:29:21 -0500 (Wed, 15 Sep 2010) | 1 line
Simplify some code in sig_analog.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@286906 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r286868 | mnicholson | 2010-09-15 08:05:52 -0500 (Wed, 15 Sep 2010) | 16 lines
Set tohost to the domain specified in the configuration file instead of the IP address of the host we are calling.
This fixes a regression introduced in r274783.
(closes issue #17960)
Reported by: adriavidal
Patches:
sip-tohost-fix1.diff uploaded by mnicholson (license 96)
Tested by: mich, mnicholson, adriavidal
(closes issue #17676)
Reported by: outcast
Patches:
sip-tohost-fix1.diff uploaded by mnicholson (license 96)
Tested by: mnicholson
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@286869 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r286189 | twilson | 2010-09-10 17:04:53 -0500 (Fri, 10 Sep 2010) | 30 lines
Merged revisions 286115 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r286115 | twilson | 2010-09-10 15:35:25 -0500 (Fri, 10 Sep 2010) | 23 lines
Merged revisions 286059 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r286059 | twilson | 2010-09-10 14:25:08 -0500 (Fri, 10 Sep 2010) | 16 lines
Inherit CHANNEL() writes to both sides of a Local channel
Having Local (/n) channels as queue members and setting the language in the
extension with Set(CHANNEL(language)=fr) sets the language on the Local/...,2
channel. Hold time report playbacks happen on the Local/...,1 channel and
therefor do not play in the specified language.
This patch modifies func_channel_write to call the setoption callback and pass
the CHANNEL() write info to the callback. chan_local uses this information to
look up the other side of the channel and apply the same changes to it.
(closes issue #17673)
Reported by: Guggemand
Review: https://reviewboard.asterisk.org/r/903/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@286190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r286118 | rmudgett | 2010-09-10 15:55:37 -0500 (Fri, 10 Sep 2010) | 25 lines
Merged revisions 286116 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r286116 | rmudgett | 2010-09-10 15:42:44 -0500 (Fri, 10 Sep 2010) | 18 lines
Merged revisions 286113 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r286113 | rmudgett | 2010-09-10 15:33:16 -0500 (Fri, 10 Sep 2010) | 11 lines
An outgoing call may not get hung up if a pre-connect incoming ISDN call is disconnected.
If the ISDN link a pre-connect incoming call is using fails or is reset,
the outgoing leg may not hang up or be delayed in hanging up. (Causes:
PRI_CAUSE_NETWORK_OUT_OF_ORDER, PRI_CAUSE_DESTINATION_OUT_OF_ORDER, and
PRI_CAUSE_NORMAL_TEMPORARY_FAILURE.)
Just hang up the call if the incoming call leg hangs up before connecting
for any reason. It makes no sense to send a BUSY or CONGESTION control
frame to the outgoing call leg under these circumstances.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@286119 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r285564 | dvossel | 2010-09-08 16:48:37 -0500 (Wed, 08 Sep 2010) | 60 lines
Merged revisions 285563 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r285563 | dvossel | 2010-09-08 16:47:29 -0500 (Wed, 08 Sep 2010) | 54 lines
Fixes interoperability problems with session timer behavior in Asterisk.
CHANGES:
1. Never put "timer" in "Require" header. This is not to our benefit
and RFC 4028 section 7.1 even warns against it. It is possible for one
endpoint to perform session-timer refreshes while the other endpoint does
not support them. If in this case the end point performing the refreshing
puts "timer" in the Require field during a refresh, the dialog will
likely get terminated by the other end.
2. Change the behavior of 'session-timer=accept' in sip.conf (which is
the default behavior of Asterisk with no session timer configuration
specified) to only run session-timers as result of an incoming INVITE
request if the INVITE contains an "Session-Expires" header... Asterisk is
currently treating having the "timer" option in the "Supported" header as
a request for session timers by the UAC. I do not agree with this. Session
timers should only be negotiated in "accept" mode when the incoming INVITE
supplies a "Session-Expires" header, otherwise RFC 4028 says we should
treat a request containing no "Session-Expires" header as a session with
no expiration.
Below I have outlined some situations and what Asterisk's behavior is.
The table reflects the behavior changes implemented by this patch.
SITUATIONS:
-Asterisk as UAS
1. Incoming INVITE: NO "Session-Expires"
2. Incoming INVITE: HAS "Session-Expires"
-Asterisk as UAC
3. Outgoing INVITE: NO "Session-Expires". 200 Ok Response HAS "Session-Expires" header
4. Outgoing INVITE: NO "Session-Expires". 200 Ok Response NO "Session-Expires" header
5. Outgoing INVITE: HAS "Session-Expires".
Active - Asterisk will have an active refresh timer regardless if the other endpoint does.
Inactive - Asterisk does not have an active refresh timer regardless if the other endpoint does.
XXXXXXX - Not possible for mode.
______________________________________
|SITUATIONS | 'session-timer' MODES |
|___________|________________________|
| | originate | accept |
|-----------|------------|-----------|
|1. | Active | Inactive |
|2. | Active | Active |
|3. | XXXXXXXX | Active |
|4. | XXXXXXXX | Inactive |
|5. | Active | XXXXXXXX |
--------------------------------------
(closes issue #17005)
Reported by: alexrecarey
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@285565 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r285006 | dvossel | 2010-09-03 17:21:50 -0500 (Fri, 03 Sep 2010) | 9 lines
Disables auth_options_request option by default.
The auth_options_request option was created to do authentication
on OPTIONS request just like INVITES are done. Since it has been
noted that some endpoints use OPTIONS requests as a way of qualifying
a peer and that a 401 authentication response could result in
interoperability issues, this option has been disabled by default.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@285007 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r284950 | dvossel | 2010-09-03 12:29:02 -0500 (Fri, 03 Sep 2010) | 14 lines
authenticate OPTIONS requests just like we would an INVITE
OPTIONS requests should be treated the same as an INVITE
This includes authentication. This patch adds the ability for
incoming out of dialog OPTION requests to be authenticated
before providing a response indicating whether an extension
is available or not. The authentication routine works the
exact same way as it does for incoming INVITEs. This means
that if a peer has 'insecure=invite' in their peer definition,
the same will be true for the processing of the OPTIONS request.
Review: https://reviewboard.asterisk.org/r/881/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@284951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r284561 | dvossel | 2010-09-01 16:47:01 -0500 (Wed, 01 Sep 2010) | 9 lines
During request to dialog matching, verify init_ruri is present before comparing.
During request to dialog matching, we attempt a best effort routine for fork
detection which requires several elements to be in place. The dialog's
initial request uri is one of those elements. Since it is best effort,
if the init_ruri is not present for some reason we can not proceed with that
routine.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@284562 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r284477 | twilson | 2010-09-01 13:44:36 -0500 (Wed, 01 Sep 2010) | 17 lines
Fix SRTP for changing SSRC and multiple a=crypto SDP lines
Adding code to Asterisk that changed the SSRC during bridges and masquerades
broke SRTP functionality. Also broken was handling the situation where an
incoming INVITE had more than one crypto offer. This patch caches the SRTP
policies the we use so that we can change the ssrc and inform libsrtp of the
new streams. It also uses the first acceptable a=crypto line from the incoming
INVITE.
(closes issue #17563)
Reported by: Alexcr
Patches:
srtp.diff uploaded by twilson (license 396)
Tested by: twilson
Review: https://reviewboard.asterisk.org/r/878/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@284479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r283692 | dvossel | 2010-08-26 10:26:37 -0500 (Thu, 26 Aug 2010) | 32 lines
Merged revisions 283691 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r283691 | dvossel | 2010-08-26 10:24:40 -0500 (Thu, 26 Aug 2010) | 25 lines
Merged revisions 283690 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r283690 | dvossel | 2010-08-26 10:22:28 -0500 (Thu, 26 Aug 2010) | 19 lines
Fixed how Asterisk destroys a dialog on channel hangup before invite receives a response.
If an ast_channel with a SIP tech pvt hangs up before the sip dialog gets a response
to its outgoing INVITE, Asterisk used to pretend_ack the INVITE. This is not rfc
compliant and results in confusion at the other endpoint. sip_pretend_ack will ack
and remove all the packets in the retransmit queue. This means that the INVITE will
stop retransmitting, and that any response to that INVITE that comes after the pretend_ack
occurs will be ignored.
Instead of faking any sort of acknowledgement for an outgoing INVITE during an internal
hangup, we should let the protocol stack process the INVITE transaction and terminate
the dialog properly. This is achieved by setting the PENDING_BYE flag. When this flag
is used, once the dialog proceeds to an escapable state the transaction will either be
canceled with a SIP_CANCEL or completed followed immediately by a BYE. Attempting to do
this any other way is incorrect. If the endpoint is not responding to the INVITE request,
the INVITE must continue to be retransmitted until it times out which will result in the
dialog being destroyed.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@283693 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r283595 | dvossel | 2010-08-25 17:57:56 -0500 (Wed, 25 Aug 2010) | 14 lines
Merged revisions 283594 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r283594 | dvossel | 2010-08-25 17:56:42 -0500 (Wed, 25 Aug 2010) | 7 lines
Add to and from tags to NOTIFY dialog-info xml body so pickup can occur.
When pedantic mode is used, the dialog-info xml generated during a
ringing event must contain the to and from tag values. Otherwise if
a pickup occurs using INVITE with replaces, Astrisk will not be able
to locate the subscription.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@283596 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r283559 | dvossel | 2010-08-25 10:54:11 -0500 (Wed, 25 Aug 2010) | 16 lines
Merged revisions 283558 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r283558 | dvossel | 2010-08-25 10:52:54 -0500 (Wed, 25 Aug 2010) | 10 lines
Asterisk will not advertise session timers are supported when 'session-timers=refuse' is used.
Asterisk now dynamically builds the "Supported" header depending
on what is enabled/disabled in sip.conf. Session timers used
to always be advertised as being supported even when they were disabled
in the configuration. This caused problems with some end points.
(issue #17005)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@283560 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r283382 | dvossel | 2010-08-24 11:11:18 -0500 (Tue, 24 Aug 2010) | 25 lines
Merged revisions 283381 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r283381 | dvossel | 2010-08-24 11:07:37 -0500 (Tue, 24 Aug 2010) | 18 lines
Merged revisions 283380 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r283380 | dvossel | 2010-08-24 11:01:51 -0500 (Tue, 24 Aug 2010) | 11 lines
This fix makes sure the ast_channel hangs up correctly when the dialog's PENDING_BYE flag is set.
When the pending bye flag is used, it is possible that the dialog will terminate
and leave the sip_pvt->owner channel up. This is because we never hangup the
ast_channel after sending the SIP_BYE request. When we receive the response for
the SIP_BYE we set need_destroy which we would expect to destroy the dialog on the
next do_monitor loop, but this is not the case. The dialog will only be destroyed
once the owner is hungup even with the need_destroy flag set. This patch sets the
softhangup flag on the ast_channel when a SIP_BYE request is sent as a result of the
pending bye flag.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@283383 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r283050 | rmudgett | 2010-08-20 10:35:38 -0500 (Fri, 20 Aug 2010) | 36 lines
Merged revisions 283049 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r283049 | rmudgett | 2010-08-20 10:31:03 -0500 (Fri, 20 Aug 2010) | 29 lines
Merged revisions 283048 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r283048 | rmudgett | 2010-08-20 10:24:36 -0500 (Fri, 20 Aug 2010) | 22 lines
Q931 - Sending PROGRESS after sending ALERTING is a protocol error
The PRI layer in chan_dadhi will check if a PROGRESS message has already
been sent, and not allow sending another (although that is technically
allowed by the Q931 spec), however it does not protect against sending an
ALERTING and then sending a PROGRESS message, which is a violation of the
specification.
Most switches don't seem to care too deeply about this, but some do, and
will disconnect the call when receiving this invalid sequence.
Protocol specification reference: T-REC-Q.931-199805-I page 223, "Figure
A.5/Q.931 -- Overview protocol control (network side) point-point
(sheet 3 of 8)"
(closes issue #17874)
Reported by: nic_bellamy
Patches:
asterisk-1.4-r282537_no-progress-after-alerting.patch uploaded by nic bellamy (license 299)
asterisk-1.6.2-r282537_no-progress-after-alerting.patch uploaded by nic bellamy (license 299)
asterisk-trunk-r282537_no-progress-after-alerting.patch uploaded by nic bellamy (license 299)
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@283051 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r282895 | dvossel | 2010-08-19 16:07:20 -0500 (Thu, 19 Aug 2010) | 25 lines
Merged revisions 282894 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r282894 | dvossel | 2010-08-19 16:05:54 -0500 (Thu, 19 Aug 2010) | 18 lines
Merged revisions 282893 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r282893 | dvossel | 2010-08-19 16:03:24 -0500 (Thu, 19 Aug 2010) | 11 lines
tos_sip option was not being set correctly
When tos_sip is used, the tos of the sip socket is only set
correctly if the socket binding changes on a reload. If the binding
stays the same but the TOS changes, the new tos value would not take
into effect. This patch fixes that.
(closes issue #17712)
Reported by: nickb
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282896 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Consolidates all offhook (new call with dialtone) to setsubstate_offhook. This should be roughly equivalent to existing code, although a couple of calls now run through the full offhook sequence rather than an abbreviated one.
(closes issue #17812)
Reported by: wedhorn
Patches:
cleanup.stateoffhook.diff uploaded by wedhorn (license 30)
Tested by: salecha, wedhorn
Review: NA
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r282671 | rmudgett | 2010-08-18 10:27:51 -0500 (Wed, 18 Aug 2010) | 1 line
Use the correct operator when calculating the PRI span devstate.
........
r282672 | rmudgett | 2010-08-18 10:28:27 -0500 (Wed, 18 Aug 2010) | 1 line
Use the correct type for aoce_delayhangup bit field.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282673 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r282639 | mnicholson | 2010-08-18 08:10:39 -0500 (Wed, 18 Aug 2010) | 13 lines
Properly handle 200 and unknown responses conatined in NOTIFY requests received in response to REFER requests.
This patch fixes the way asterisk handles NOTIFY requests received in response to REFER requests. These changes to NOTIFY handler were first introduced in r217482. This new change properly handles the 200 response by queueing an AST_TRANSFER_SUCCESS control frame and also prevents that control frame from being queued when provisional and unknown responses are received.
(issue #17486)
Reported by: davidw
Tested by: mnicholson
(issue #12713)
Reported by: davidw
Review: https://reviewboard.asterisk.org/r/860/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Russell Bryant
Tzafrir Cohen
Brad Watkins
Tilghman Lesher
Richard Mudgett
Terry Wilson
David Vossel
Jeff Peeler
Sean Bright
Paul Belanger
Matthew Nicholson
Brett Bryant
Leif Madsen
Stefan Schmidt
Olle Johansson
Jason Parker
Damien Wedhorn