8761 Commits (af788aab5c4af70f3b68b49f080dd93a0f5e17d1)

Author	SHA1	Message	Date
Florent CHAUVEAU	870f59e28d	audiosocket: added support for DTMF frames ... Updated the AudioSocket protocol to allow sending DTMF frames. AST_FRAME_DTMF frames are now forwarded to the server, in addition to AST_FRAME_AUDIO frames. A new payload type AST_AUDIOSOCKET_KIND_DTMF with value 0x03 was added to the protocol. The payload is a 1-byte ascii representing the DTMF digit (0-9,*,#...). UserNote: The AudioSocket protocol now forwards DTMF frames with payload type 0x03. The payload is a 1-byte ascii representing the DTMF digit (0-9,*,#...). (cherry picked from commit ea657ec7c7)	5 months ago
Norm Harrison	4fd8b7c3aa	audiosocket: fix timeout, fix dialplan app exit, server address in logs ... - Correct wait timeout logic in the dialplan application. - Include server address in log messages for better traceability. - Allow dialplan app to exit gracefully on hangup messages and socket closure. - Optimize I/O by reducing redundant read()/write() operations. Co-authored-by: Florent CHAUVEAU <florentch@pm.me> (cherry picked from commit e8209bf56b)	5 months ago
Alexei Gradinari	45550b6ee5	chan_pjsip: set correct Endpoint Device State on multiple channels ... 1. When one channel is placed on hold, the device state is set to ONHOLD without checking other channels states. In case of AST_CONTROL_HOLD set the device state as AST_DEVICE_UNKNOWN to calculate aggregate device state of all active channels. 2. The current implementation incorrectly classifies channels in use. The only channels that has the states: UP, RING and BUSY are considered as "in use". A channel should be considered "in use" if its state is anything other than DOWN or RESERVED. 3. Currently, if the number of channels "in use" is greater than device_state_busy_at, the system does not set the state to BUSY. Instead, it incorrectly assigns an aggregate device state. The endpoint device state should be BUSY if the number of channels "in use" is greater than or equal to device_state_busy_at. Fixes: #1181 (cherry picked from commit 03cf8c62ad)	5 months ago
Luz Paz	595a58685b	docs: Fix various typos in channels/ ... Found via `codespell -q 3 -S "./CREDITS,*.po" -L abd,asent,atleast,cachable,childrens,contentn,crypted,dne,durationm,enew,exten,inout,leapyear,mye,nd,oclock,offsetp,ot,parm,parms,preceeding,pris,ptd,requestor,re-use,re-used,re-uses,ser,siz,slanguage,slin,thirdparty,varn,varns,ues` (cherry picked from commit 44a27dc13f)	7 months ago
Holger Hans Peter Freyther	0e8bde6bde	ari/pjsip: Make it possible to control transfers through ARI ... Introduce a ChannelTransfer event and the ability to notify progress to ARI. Implement emitting this event from the PJSIP channel instead of handling the transfer in Asterisk when configured. Introduce a dialplan function to the PJSIP channel to switch between the "core" and "ari-only" behavior. UserNote: Call transfers on the PJSIP channel can now be controlled by ARI. This can be enabled by using the PJSIP_TRANSFER_HANDLING(ari-only) dialplan function. (cherry picked from commit 71eb8a262f)	7 months ago
Sean Bright	3f15501335	docs: Indent <since> tags. ... Also updates the 'since' of applications/functions that existed before XML documentation was introduced (1.6.2.0). (cherry picked from commit b4156fecf0)	7 months ago
George Joseph	a80179bfe7	docs: Add version information to application and function XML elements ... * Do a git blame on the embedded XML application or function element. * From the commit hash, grab the summary line. * Do a git log --grep <summary> to find the cherry-pick commits in all branches that match. * Do a git patch-id to ensure the commits are all related and didn't get a false match on the summary. * Do a git tag --contains <commit> to find the tags that contain each commit. * Weed out all tags not ..0. * Sort and discard any .0.0 and following tags where the commit appeared in an earlier branch. * The result is a single tag for each branch where the application or function was defined. The applications and functions defined in the following files were done by hand because the XML was extracted from the C source file relatively recently. * channels/pjsip/dialplan_functions_doc.xml * main/logger_doc.xml * main/manager_doc.xml * res/res_geolocation/geoloc_doc.xml * res/res_stir_shaken/stir_shaken_doc.xml (cherry picked from commit 85a4ab8390)	9 months ago
George Joseph	8c07517a6f	docs: Add version information to manager event instance XML elements ... * Do a git blame on the embedded XML managerEvent elements. * From the commit hash, grab the summary line. * Do a git log --grep <summary> to find the cherry-pick commits in all branches that match. * Do a git patch-id to ensure the commits are all related and didn't get a false match on the summary. * Do a git tag --contains <commit> to find the tags that contain each commit. * Weed out all tags not ..0. * Sort and discard any .0.0 and following tags where the commit appeared in an earlier branch. * The result is a single tag for each branch where the application or function was defined. The events defined in res/res_pjsip/pjsip_manager.xml were done by hand because the XML was extracted from the C source file relatively recently. Two bugs were fixed along the way... * The get_documentation awk script was exiting after it processed the first DOCUMENTATION block it found in a file. We have at least 1 source file with multiple DOCUMENTATION blocks so only the first one in them was being processed. The awk script was changed to continue searching rather than exiting after the first block. * Fixing the awk script revealed an issue in logger.c where the third DOCUMENTATION block contained a XML fragment that consisted only of a managerEventInstance element that wasn't wrapped in a managerEvent element. Since logger_doc.xml already existed, the remaining fragments in logger.c were moved to it and properly organized. (cherry picked from commit a47b8e2d40)	9 months ago
George Joseph	1ccf0ae7e8	docs: Add version information to configObject and configOption XML elements ... Most of the configObjects and configOptions that are implemented with ACO or Sorcery now have `<since>/<version>` elements added. There are probably some that the script I used didn't catch. The version tags were determined by the following... * Do a git blame on the API call that created the object or option. * From the commit hash, grab the summary line. * Do a `git log --grep <summary>` to find the cherry-pick commits in all branches that match. * Do a `git patch-id` to ensure the commits are all related and didn't get a false match on the summary. * Do a `git tag --contains <commit>` to find the tags that contain each commit. * Weed out all tags not <major>.<minor>.0. * Sort and discard any <major>.0.0 and following tags where the commit appeared in an earlier branch. * The result is a single tag for each branch where the API was last touched. configObjects and configOptions elements implemented with the base ast_config APIs were just not possible to find due to the non-deterministic way they are accessed. Also note that if the API call was on modified after it was added, the version will be the one it was last modified in. Final note: The configObject and configOption elements were introduced in 12.0.0 so options created before then may not have any XML documentation. (cherry picked from commit a22dc33057)	9 months ago
Naveen Albert	2253fa052d	chan_iax2: Avoid unnecessarily backlogging non-voice frames. ... Currently, when receiving an unauthenticated call, we keep track of the negotiated format in the chosenformat, which allows us to later create the channel using the right format. However, this was not done for authenticated calls. This meant that in certain circumstances, if we had not yet received a voice frame from the peer, only certain other types of frames (e.g. text), there were no variables containing the appropriate frame. This led to problems in the jitterbuffer callback where we unnecessarily bailed out of retrieving a frame from the jitterbuffer. This was logic intentionally added in commit 73103bdcd5 in response to an earlier regression, and while this prevents crashes, it also backlogs legitimate frames unnecessarily. The abort logic was initially added because at this point in the code, we did not have the negotiated format available to us. However, it should always be available to us as a last resort in chosenformat, so we now pull it from there if needed. This allows us to process frames the jitterbuffer even if voicefmt and peerfmt aren't set and still avoid the crash. The failsafe logic is retained, but now it shouldn't be triggered anymore. Resolves: #1054 (cherry picked from commit ea3ac94bbf)	9 months ago
Naveen Albert	c3a5f1d3f3	sig_analog: Add Last Number Redial feature. ... This adds the Last Number Redial feature to simple switch. UserNote: Users can now redial the last number called if the lastnumredial setting is set to yes. Resolves: #437 (cherry picked from commit 9ebe0e3d2f)	9 months ago
George Joseph	4e995cef69	docs: Various XML fixes ... * channels/pjsip/dialplan_functions_doc.xml: Added xmlns:xi to docs element. * main/bucket.c: Removed XML completely since the "bucket" and "file" objects are internal only with no config file. * main/named_acl.c: Fixed the configFile element name. It was "named_acl.conf" and should have been "acl.conf" * res/res_geolocation/geoloc_doc.xml: Added xmlns:xi to docs element. * res/res_http_media_cache.c: Fixed the configFile element name. It was "http_media_cache.conf" and should have been "res_http_media_cache.conf". (cherry picked from commit 3b53152624)	9 months ago
Sean Bright	c48e26eb77	dialplan_functions_doc.xml: Document PJSIP_MEDIA_OFFER's `media` argument. ... Resolves: #1023 (cherry picked from commit f9f858b55e)	9 months ago
Sean Bright	dbc7efbfd4	manager: Add `<since>` tags for all AMI actions. ... (cherry picked from commit 7f13966202)	9 months ago
Naveen Albert	5f0354c287	chan_dahdi: Fix wrong channel state when RINGING recieved. ... Previously, when AST_CONTROL_RINGING was received by a DAHDI device, it would set its channel state to AST_STATE_RINGING. However, an analysis of the codebase and other channel drivers reveals RINGING corresponds to physical power ringing, whereas AST_STATE_RING should be used for audible ringback on the channel. This also ensures the correct device state is returned by the channel state to device state conversion. Since there seems to be confusion in various places regarding AST_STATE_RING vs. AST_STATE_RINGING, some documentation has been added or corrected to clarify the actual purposes of these two channel states, and the associated device state mapping. An edge case that prompted this fix, but isn't explicitly addressed here, is that of an incoming call to an FXO port. The channel state will be "Ring", which maps to a device state of "In Use", not "Ringing" as would be more intuitive. However, this is semantic, since technically, Asterisk is treating this the same as any other incoming call, and so "Ring" is the semantic state (put another way, Asterisk isn't ringing anything, like in the cases where channels are in the "Ringing" state). Since FXO ports don't currently support Call Waiting, a suitable workaround for the above would be to ignore the device state and instead check the channel state (e.g. IMPORT(DAHDI/1-1,CHANNEL(state))) since it will be Ring if the FXO port is idle (but a call is ringing on it) and Up if the FXO port is actually in use. (In both cases, the device state would misleadingly be "In Use".) Resolves: #1029 (cherry picked from commit 9f6f9a60e5)	9 months ago
Naveen Albert	67f1c3aee3	chan_iax2: Add log message for rejected calls. ... Add a log message for a path that currently silently drops IAX2 frames without indicating that anything is wrong. (cherry picked from commit 9ced75008a)	9 months ago
Maximilian Fridrich	c4d768f127	chan_pjsip: Send VIDUPDATE RTP frame for all H.264 streams ... Currently, when a chan_pjsip channel receives a VIDUPDATE indication, an RTP VIDUPDATE frame is only queued on a H.264 stream if WebRTC is enabled on that endpoint. This restriction does not really make sense. Now, a VIDUPDATE RTP frame is written even if WebRTC is not enabled (as is the case with VP8, VP9, and H.265 streams). Resolves: #1013 (cherry picked from commit f1f521d366)	9 months ago
Naveen Albert	bdccc78cc8	sig_analog: Fix regression with FGD and E911 signaling. ... Commit 466eb4a52b introduced a regression which completely broke Feature Group D and E911 signaling, by removing the call to analog_my_getsigstr, which affected multiple switch cases. Restore the original behavior for all protocols except Feature Group C CAMA (MF), which is all that patch was attempting to target. Resolves: #993 (cherry picked from commit 7a4036574c)	9 months ago
Naveen Albert	7d8bb3302e	chan_dahdi: Never send MWI while off-hook. ... In some circumstances, it is possible for the do_monitor thread to erroneously think that a line is on-hook and send an MWI FSK spill to it when the line is really off-hook and no MWI should be sent. Commit 0a8b3d3467 previously fixed this issue in a more readily encountered scenario, but it has still been possible for MWI to be sent when it shouldn't be. To robustly fix this issue, query DAHDI for the hook status to ensure we don't send MWI on a line that is actually still off hook. Resolves: #928 (cherry picked from commit 63e9cc19d1)	11 months ago
Mike Bradeen	6e8a5a2332	res_pjsip_notify: add dialplan application ... Add dialplan application PJSIPNOTIFY to send either pre-configured NOTIFY messages from pjsip_notify.conf or with headers defined in dialplan. Also adds the ability to send pre-configured NOTIFY commands to a channel via the CLI. Resolves: #799 UserNote: A new dialplan application PJSIPNotify is now available which can send SIP NOTIFY requests from the dialplan. The pjsip send notify CLI command has also been enhanced to allow sending NOTIFY messages to a specific channel. Syntax: pjsip send notify <option> channel <channel> (cherry picked from commit e7ca7aa881)	1 year ago
Ben Ford	0939d0779c	channel: Add multi-tenant identifier. ... This patch introduces a new identifier for channels: tenantid. It's a stringfield on the channel that can be used for general purposes. It will be inherited by other channels the same way that linkedid is. You can set tenantid in a few ways. The first is to set it in the dialplan with the Set and CHANNEL functions: exten => example,1,Set(CHANNEL(tenantid)=My tenant ID) It can also be accessed via CHANNEL: exten => example,2,NoOp(CHANNEL(tenantid)) Another method is to use the new tenantid option for pjsip endpoints in pjsip.conf: [my_endpoint] type=endpoint tenantid=My tenant ID This is considered the best approach since you will be able to see the tenant ID as early as the Newchannel event. It can also be set using set_var in pjsip.conf on the endpoint like setting other channel variable: set_var=CHANNEL(tenantid)=My tenant ID Note that set_var will not show tenant ID on the Newchannel event, however. Tenant ID has also been added to CDR. It's read-only and can be accessed via CDR(tenantid). You can also get the tenant ID of the last channel communicated with via CDR(peertenantid). Tenant ID will also show up in CEL records if it has been set, and the version number has been bumped accordingly. Fixes: #740 UserNote: tenantid has been added to channels. It can be read in dialplan via CHANNEL(tenantid), and it can be set using Set(CHANNEL(tenantid)=My tenant ID). In pjsip.conf, it is recommended to use the new tenantid option for pjsip endpoints (e.g., tenantid=My tenant ID) so that it will show up in Newchannel events. You can set it like any other channel variable using set_var in pjsip.conf as well, but note that this will NOT show up in Newchannel events. Tenant ID is also available in CDR and can be accessed with CDR(tenantid). The peer tenant ID can also be accessed with CDR(peertenantid). CEL includes tenant ID as well if it has been set. UpgradeNote: A new versioned struct (ast_channel_initializers) has been added that gets passed to __ast_channel_alloc_ap. The new function ast_channel_alloc_with_initializers should be used when creating channels that require the use of this struct. Currently the only value in the struct is for tenantid, but now more fields can be added to the struct as necessary rather than the __ast_channel_alloc_ap function. A new option (tenantid) has been added to endpoints in pjsip.conf as well. CEL has had its version bumped to include tenant ID. (cherry picked from commit 3841fa814e)	1 year ago
Sean Bright	f88812ff86	pjsip: Add PJSIP_PARSE_URI_FROM dialplan function. ... Various SIP headers permit a URI to be prefaced with a `display-name` production that can include characters (like commas and parentheses) that are problematic for Asterisk's dialplan parser and, specifically in the case of this patch, the PJSIP_PARSE_URI function. This patch introduces a new function - `PJSIP_PARSE_URI_FROM` - that behaves identically to `PJSIP_PARSE_URI` except that the first argument is now a variable name and not a literal URI. Fixes #756 (cherry picked from commit 78d63bc11c)	1 year ago
Naveen Albert	bd917229b4	callerid.c: Parse previously ignored Caller ID parameters. ... Commit f2f397c1a8 previously made it possible to send Caller ID parameters to FXS stations which, prior to that, could not be sent. This change is complementary in that we now handle receiving all these parameters on FXO lines and provide these up to the dialplan, via chan_dahdi. In particular: * If a redirecting reason is provided, the channel's redirecting reason is set. No redirecting number is set, since there is no parameter for this in the Caller ID protocol, but the reason can be checked to determine if and why a call was forwarded. * If the Call Qualifier parameter is received, the Call Qualifier variable is set. * Some comments have been added to explain why some of the code is the way it is, to assist other people looking at it. With this change, Asterisk's Caller ID implementation is now reasonably complete for both FXS and FXO operation. Resolves: #681 (cherry picked from commit 4cf8d9d94a)	1 year ago
Naveen Albert	01a5a93530	chan_dahdi: Add DAHDIShowStatus AMI action. ... * Add an AMI action to correspond to the "dahdi show status" command, allowing span information to be retrieved via AMI. * Show span number and sig type in "dahdi show channels". Resolves: #673 (cherry picked from commit 4ff93474df)	1 year ago
George Joseph	800f11649b	Fix incorrect application and function documentation references ... There were a few references in the embedded documentation XML where the case didn't match or where the referenced app or function simply didn't exist any more. These were causing 404 responses in docs.asterisk.org. (cherry picked from commit 9e2179baa1)	1 year ago
Naveen Albert	f1223a041b	chan_dahdi: Don't retry opening nonexistent channels on restart. ... Commit 729cb1d390 added logic to retry opening DAHDI channels on "dahdi restart" if they failed initially, up to 1,000 times in a loop, to address cases where the channel was still in use. However, this retry loop does not use the actual error, which means chan_dahdi will also retry opening nonexistent channels 1,000 times per channel, causing a flood of unnecessary warning logs for an operation that will never succeed, with tens or hundreds of thousands of open attempts being made. The original patch would have been more targeted if it only retried on the specific relevant error (likely EBUSY, although it's hard to say since the original issue is no longer available). To avoid the problem above while avoiding the possibility of breakage, this skips the retry logic if the error is ENXIO (No such device or address), since this will never succeed. Resolves: #669 (cherry picked from commit 63aa08fa0b)	1 year ago
Naveen Albert	dad0a33e97	chan_dahdi: Allow specifying waitfordialtone per call. ... The existing "waitfordialtone" setting in chan_dahdi.conf applies permanently to a specific channel, regardless of how it is being used. This rather restrictively prevents a system from simultaneously being able to pick free lines for outgoing calls while also allowing barge-in to a trunk by some other arrangement. This allows specifying "waitfordialtone" using the CHANNEL function for only the next call that will be placed, allowing significantly more flexibility in the use of trunk interfaces. Resolves: #472 UserNote: "waitfordialtone" may now be specified for DAHDI trunk channels on a per-call basis using the CHANNEL function. (cherry picked from commit 7f51313725)	1 year ago
George Joseph	3ca2bb5e84	pjsip show channelstats: Prevent possible segfault when faxing ... Under rare circumstances, it's possible for the original audio session in the active_media_state default_session to be corrupted instead of removed when switching to the t38/image media session during fax negotiation. This can cause a segfault when a "pjsip show channelstats" attempts to print that audio media session's rtp statistics. In these cases, the active_media_state topology is correctly showing only a single t38/image stream so we now check that there's an audio stream in the topology before attempting to use the audio media session to get the rtp statistics. Resolves: #592 (cherry picked from commit adcfbcd50e)	2 years ago
Naveen Albert	76d33df366	chan_dahdi: Allow MWI to be manually toggled on channels. ... This adds a CLI command to manually toggle the MWI status of a channel, useful for troubleshooting or resetting MWI devices, similar to the capabilities offered with SIP messaging to manually control MWI status. UserNote: The 'dahdi set mwi' now allows MWI on channels to be manually toggled if needed for troubleshooting. Resolves: #440 (cherry picked from commit 4b908f364d)	2 years ago
PeterHolik	727a4cceec	chan_rtp.c: MulticastRTP missing refcount without codec option ... Fixes: #529 (cherry picked from commit 3b46872a8f)	2 years ago
PeterHolik	8a999b6706	chan_rtp.c: Change MulticastRTP nameing to avoid memory leak ... Fixes: asterisk#536 (cherry picked from commit 6fe045fd64)	2 years ago
Naveen Albert	e735ab8cfb	logger: Fix linking regression. ... Commit 008731b0a4 caused a regression by resulting in logger.xml being compiled and linked into the asterisk binary in lieu of logger.c on certain platforms if Asterisk was compiled in dev mode. To fix this, we ensure the file has a unique name without the extension. Most existing .xml files have been named differently from any .c files in the same directory or did not pose this issue. channels/pjsip/dialplan_functions.xml does not pose this issue but is also being renamed to adhere to this policy. Resolves: #539	2 years ago
Naveen Albert	4e774da45a	sig_analog: Fix channel leak when mwimonitor is enabled. ... When mwimonitor=yes is enabled for an FXO port, the do_monitor thread will launch mwi_thread if it thinks there could be MWI on an FXO channel, due to the noise threshold being satisfied. This, in turns, calls analog_ss_thread_start in sig_analog. However, unlike all other instances where __analog_ss_thread is called in sig_analog, this call path does not properly set pvt->ss_astchan to the Asterisk channel, which means that the Asterisk channel is NULL when __analog_ss_thread starts executing. As a result, the thread exits and the channel is never properly cleaned up by calling ast_hangup. This caused issues with do_monitor on incoming calls, as it would think the channel was still owned even while receiving events, leading to an infinite barrage of warning messages; additionally, the channel would persist improperly. To fix this, the assignment is added to the call path where it is missing (which is only used for mwi_thread). A warning message is also added since previously there was no indication that __analog_ss_thread was exiting abnormally. This resolves both the channel leak and the condition that led to the warning messages. Resolves: #458 (cherry picked from commit c930230a73)	2 years ago
Naveen Albert	bef9a9422d	func_channel: Expose previously unsettable options. ... Certain channel options are not set anywhere or exposed in any way to users, making them unusable. This exposes some of these options which make sense for users to manipulate at runtime. Resolves: #442 (cherry picked from commit 9211fb5e97)	2 years ago
Sean Bright	a694931478	chan_iax2.c: Don't send unsanitized data to the logger. ... This resolves an issue where non-printable characters could be sent to the console/log files. (cherry picked from commit da4e6e7ddb)	2 years ago
George Joseph	c40496cb38	chan_pjsip: Add PJSIPHangup dialplan app and manager action ... See UserNote below. Exposed the existing Hangup AMI action in manager.c so we can use all of it's channel search and AMI protocol handling without duplicating that code in dialplan_functions.c. Added a lookup function to res_pjsip.c that takes in the string represenation of the pjsip_status_code enum and returns the actual status code. I.E. ast_sip_str2rc("DECLINE") returns 603. This allows the caller to specify PJSIPHangup(decline) in the dialplan, just like Hangup(call_rejected). Also extracted the XML documentation to its own file since it was almost as large as the code itself. UserNote: A new dialplan app PJSIPHangup and AMI action allows you to hang up an unanswered incoming PJSIP call with a specific SIP response code in the 400 -> 699 range. (cherry picked from commit af7e89ebf8)	2 years ago
Sean Bright	cd39daaed1	chan_iax2.c: Ensure all IEs are displayed when dumping frame contents. ... When IAX2 debugging was enabled (`iax2 set debug on`), if the last IE in a frame was one that may not have any data - such as the CALLTOKEN IE in an NEW request - it was not getting displayed. (cherry picked from commit 19507ae160)	2 years ago
Naveen Albert	27f3df7139	chan_dahdi: Warn if nonexistent cadence is requested. ... If attempting to ring a channel using a nonexistent cadence, emit a warning, before falling back to the default cadence. Resolves: #409 (cherry picked from commit cdcdca5199)	2 years ago
Naveen Albert	c58d5e9190	chan_dahdi: Clarify scope of callgroup/pickupgroup. ... Internally, chan_dahdi only applies callgroup and pickupgroup to FXO signalled channels, but this is not documented anywhere. This is now documented in the sample config, and a warning is emitted if a user tries configuring these settings for channel types that do not support these settings, since they will not have any effect. Resolves: #294 (cherry picked from commit 5b89e40541)	2 years ago
Naveen Albert	d01b047de3	chan_console: Fix deadlock caused by unclean thread exit. ... To terminate a console channel, stop_stream causes pthread_cancel to make stream_monitor exit. However, commit 5b8fea93d1 added locking to this function which results in deadlock due to the stream_monitor thread being killed while it's holding the pvt lock. To resolve this, a flag is now set and read to indicate abort, so the use of pthread_cancel and pthread_kill can be avoided altogether. Resolves: #308 (cherry picked from commit 3b027d1e47)	2 years ago
Naveen Albert	69338381ea	chan_iax2: Improve authentication debugging. ... Improves and adds some logging to make it easier for users to debug authentication issues. Resolves: #286 (cherry picked from commit f93138bcad)	2 years ago
Maximilian Fridrich	3829c94d71	chan_rtp: Implement RTP glue for UnicastRTP channels ... Resolves: #298 UserNote: The dial string option 'g' was added to the UnicastRTP channel which enables RTP glue and therefore native RTP bridges with those channels. (cherry picked from commit 1af2ae177c)	2 years ago
Naveen Albert	e2f0538dea	sig_analog: Add Called Subscriber Held capability. ... This adds support for Called Subscriber Held for FXS lines, which allows users to go on hook when receiving a call and resume the call later from another phone on the same line, without disconnecting the call. This is a convenience mechanism that most real PSTN telephone switches support. ASTERISK-30372 #close Resolves: #240 UserNote: Called Subscriber Held is now supported for analog FXS channels, using the calledsubscriberheld option. This allows a station user to go on hook when receiving an incoming call and resume from another phone on the same line by going on hook, without disconnecting the call. (cherry picked from commit cd0bfe193f)	2 years ago
Naveen Albert	d16046e41f	chan_dahdi: Allow autoreoriginating after hangup. ... Currently, if an FXS channel is still off hook when all calls on the line have hung up, the user is provided reorder tone until going back on hook again. In addition to not reflecting what most commercial switches actually do, it's very common for switches to automatically reoriginate for the user so that dial tone is provided without the user having to depress and release the hookswitch manually. This can increase convenience for users. This behavior is now supported for kewlstart FXS channels. It's supported only for kewlstart (FXOKS) mainly because the behavior doesn't make any sense for ground start channels, and loop start signalling doesn't provide the necessary DAHDI event that makes this easy to implement. Likely almost everyone is using FXOKS over FXOLS anyways since FXOLS is pretty useless these days. ASTERISK-30357 #close Resolves: #224 UserNote: The autoreoriginate setting now allows for kewlstart FXS channels to automatically reoriginate and provide dial tone to the user again after all calls on the line have cleared. This saves users from having to manually hang up and pick up the receiver again before making another call.	2 years ago
Naveen Albert	e1a1ae933b	sig_analog: Allow three-way flash to time out to silence. ... sig_analog allows users to flash and use the three-way dial tone as a primitive hold function, simply by never timing it out. Some systems allow this dial tone to time out to silence, so the user is not annoyed by a persistent dial tone. This option allows the dial tone to time out normally to silence. ASTERISK-30004 #close Resolves: #205 UserNote: The threewaysilenthold option now allows the three-way dial tone to time out to silence, rather than continuing forever.	2 years ago
Sean Bright	508657879e	chan_iax2.c: Avoid crash with IAX2 switch support. ... A change made in 82cebaa0 did not properly handle the case when a channel was not provided, triggering a crash. ast_check_hangup(...) does not protect against NULL pointers. Fixes #180	2 years ago
Naveen Albert	8cd7548e43	sig_analog: Allow immediate fake ring to be suppressed. ... When immediate=yes on an FXS channel, sig_analog will start fake audible ringback that continues until the channel is answered. Even if it answers immediately, the ringback is still audible for a brief moment. This can be disruptive and unwanted behavior. This adds an option to disable this behavior, though the default behavior remains unchanged. ASTERISK-30003 #close Resolves: #118 UserNote: The immediatering option can now be set to no to suppress the fake audible ringback provided when immediate=yes on FXS channels.	2 years ago
Naveen Albert	4176f57938	chan_dahdi: Fix Caller ID presentation for FXO ports. ... Currently, the presentation for incoming channels is always available, because it is never actually set, meaning the channel presentation can be nonsensical. If the presentation from the incoming Caller ID spill is private or unavailable, we now update the channel presentation to reflect this. Resolves: #120 ASTERISK-30333 ASTERISK-21741	2 years ago
Naveen Albert	273ad73d99	sig_analog: Add fuller Caller ID support. ... A previous change, ASTERISK_29991, made it possible to send additional Caller ID parameters that were not previously supported. This change adds support for analog DAHDI channels to now be able to receive these parameters for on-hook Caller ID, in order to enhance the usability of CPE that support these parameters. Resolves: #94 ASTERISK-30331 UserNote: Additional Caller ID properties are now supported on incoming calls to FXS stations, namely the redirecting reason and call qualifier.	2 years ago
Maximilian Fridrich	18f0b6661a	chan_pjsip: Allow topology/session refreshes in early media state (#74) ... With this change, session modifications in the early media state are possible if the SDP was sent reliably and confirmed by a PRACK. For details, see RFC 6337, escpecially section 3.2. Resolves: #73	2 years ago