our DAHDI operator mode stuff. Technically, it would work fine, as 'DAH'
is currently unique amongst our channel technologies, but as Jared points
out:
<@jsmith> Sure... as long as the technology starts whith DAH.... but
it could be DAHDOO!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@147050 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142675 | murf | 2008-09-11 22:29:34 -0600 (Thu, 11 Sep 2008) | 29 lines
Tested by: sergee, murf, chris-mac, andrew, KNK
This is a "second attempt" to restore the previous "endbeforeh" behavior
in 1.4 and up. In order to capture information concerning all the
legs of transfers in all their infinite combinations, I was forced
to this particular solution by a chain of logical necessities, the
first being that I was not allowed to rewrite the CDR mechanism from
the ground up!
This change basically leaves the original machinery alone, which allows
IVR and local channel type situations to generate CDR's as normal, but
a channel flag can be set to suppress the normal running of the h exten.
That flag would be set by the code that runs the h exten from the
ast_bridge_call routine, to prevent the h exten from being run twice.
Also, a flag in the ast_bridge_config struct passed into ast_bridge_call
can be used to suppress the running of the h exten in that routine. This
would happen, for instance, if you use the 'g' option in the Dial app.
Running this routine 'early' allows not only the CDR() func to be used
in the h extension for reading CDR variables, but also allows them to
be modified before the CDR is posted to the backends.
While I dearly hope that this patch overcomes all problems, and
introduces no new problems, reality suggests that surely someone
will have problems. In this case, please re-open 13251 (or 13289),
and we'll see if we can't fix any remaining issues.
** trunk note: some code to suppress the h exten being run
from app_queue was added; for the 'continue' option available
only in trunk/1.6.x.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r139347 | murf | 2008-08-21 17:03:50 -0600 (Thu, 21 Aug 2008) | 47 lines
(closes issue #13251)
Reported by: sergee
Tested by: murf
THis is a bold move for a static release fix, but I wouldn't have
made it if I didn't feel confident (at least a *bit* confident)
that it wouldn't mess everyone up.
The reasoning goes something like this:
1. We simply cannot do anything with CDR's at the current point
(in pbx.c, after the __ast_pbx_run loop). It's way too late to
have any affect on the CDRs. The CDR is already posted and gone,
and the remnants have been cleared.
2. I was very much afraid that moving the running of the 'h'
extension down into the bridge code (where it would be now
practical to do it), would result in a lot more calls to the
'h' exten, so I implemented it as another exten under another
name, but found, to my pleasant surprise, that there was a
1:1 correspondence to the running of the 'h' exten in the
pbx_run loop, and the new spot at the end of the bridge.
So, I ifdef'd out the current 'h' loop, and moved it into
the bridge code. The only difference I can see is the stuff
about the AST_PBX_KEEPALIVE, and hopefully, if this
is still an important decision point, I can replicate it
if there are complaints. To be perfectly honest,
the KEEPALIVE situation is not totally clear to me,
and how it relates to a post-bridge situation is less
clear. I suspect the users will point out everything
in total clarity if this steps on anyone's toes!
3. I temporarily swap the bridge_cdr into the channel
before running the 'h' exten, which makes it possible
for users to edit the cdr before it goes out the door.
And, of course, with the endbeforehexten config var set,
the users can also get at the billsec/duration vals.
After the h exten finishes, the cdr is swapped back
and processing continues as normal.
Please, all who deal with CDR's, please test this version
of Asterisk, and file bug reports as appropriate!
........
I also made a little fix to the app_dial's 'e' option,
that is related to my updates.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@139627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135799 | murf | 2008-08-05 17:13:20 -0600 (Tue, 05 Aug 2008) | 34 lines
(closes issue #12982)
Reported by: bcnit
Tested by: murf
I discovered that also, in the previous bug fixes and changes,
the cdr.conf 'unanswered' option is not being obeyed, so
I fixed this.
And, yes, there are two 'answer' times involved in this
scenario, and I would agree with you, that the first
answer time is the time that should appear in the CDR.
(the second 'answer' time is the time that the bridge
was begun).
I made the necessary adjustments, recording the first
answer time into the peer cdr, and then using that to
override the bridge cdr's value.
To get the 'unanswered' CDRs to appear, I purposely
output them, using the dial cmd to mark them as
DIALED (with a new flag), and outputting them if
they bear that flag, and you are in the right mode.
I also corrected one small mention of the Zap device
to equally consider the dahdi device.
I heavily tested 10-sec-wait macros in dial, and
without the macro call; I tested hangups while the
macro was running vs. letting the macro complete
and the bridge form. Looks OK. Removed all the
instrumentation and debug.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r130792 | mmichelson | 2008-07-14 12:50:21 -0500 (Mon, 14 Jul 2008) | 8 lines
Add a check to the CAN_EARLY_BRIDGE macro in app_dial to
be sure there are no audiohooks present on the channels
involved. This fixed a one-way audio situation I had in
my test setup. I couldn't find any open issues that suggested
one-way audio with regards to mixmonitor (or other audiohook)
usage, though.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@130794 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r129149 | tilghman | 2008-07-08 15:27:47 -0500 (Tue, 08 Jul 2008) | 8 lines
Cause SIP to return a 480 instead of a 404 when a sip peer exists, but is not
registered.
(closes issue #12885)
Reported by: ibc
Patches:
20080701__bug12885__2.diff.txt uploaded by Corydon76 (license 14)
Tested by: ibc
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@129152 65c4cc65-6c06-0410-ace0-fbb531ad65f3
to how language is handled between two channels whose native
language is different. Prior to this patch, app_dial would have
the callee inherit the caller's language, and app_queue would not.
After this patch, app_dial no longer has the language inheritance
capability. This seems to make the most sense since it seems more
natural for a person to hear files played back in his/her native
language instead of the language of the person on the far end of
the call. See the CHANGES file for hints on how to keep the
previous behavior of app_dial if desired.
(closes issue #12489)
Reported by: bcnit
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@125647 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: ys
Many thanks to ys for doing the research on this problem.
I didn't think it would be best to unlock the contexts
and then relock them after the remove_extension2() call,
so I added an extra arg to remove_extension2() and set it
appropriately in each call. There were not that many.
I considered forcing the code to lock the contexts before
the call to remove_extension2(), but that would require
a slightly greater degree of changes, especially since
the find_context_locked is local to pbx.c
I did a simple sanity test to make sure the code doesn't
mess things up in general.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@123165 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- make data member of the ast_frame struct a named union instead of a void
Recently the ast_queue_hangup function got a new parameter, the hangupcause
Feedback came in that this is no good and that instead a new function should be created.
This I did.
The hangupcause was stored in the seqno member of the ast_frame struct. This is not very
elegant, and since there's already a data member that one should be used.
Problem is, this member was a void *.
Now it's a named union so it can hold a pointer, an uint32 and there's a padding in case someone
wants to store another type in there in the future.
This commit is so massive, because all ast_frame.data uses have to be
altered to ast_frame.data.data
Thanks russellb and kpfleming for the feedback.
(closes issue #12674)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114112 | mmichelson | 2008-04-14 11:24:22 -0500 (Mon, 14 Apr 2008) | 9 lines
If the datastore has been moved to another channel due to a masquerade, then
freeing the datastore here causes an eventual double free when the new channel
hangs up. We should only free the datastore if we were able to successfully remove
it from the channel we are referencing (i.e. the datastore was not moved).
(closes issue #12359)
Reported by: pguido
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114113 65c4cc65-6c06-0410-ace0-fbb531ad65f3
those XXX comments from the code.
The redundancy occurs because the 'single' flag implies that the 'r' and 'm' flags are
not set, so there's no need to explicitly check them again.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@107530 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: rizzo
Tested by: murf
Proposal of the changes to be made, and then an announcement of how they were accomplished:
http://lists.digium.com/pipermail/asterisk-dev/2008-February/032065.html
and:
http://lists.digium.com/pipermail/asterisk-dev/2008-March/032124.html
Here is a recap, file by file, of what I have done:
pbx/pbx_config.c
pbx/pbx_ael.c
All funcs that were passed a ptr to the context list, now will ALSO be passed a hashtab ptr to the same set.
Why? because (for the time being), the dialplan is stored in both, to facilitate a quick, low-cost move to
hash-tables to speed up dialplan processing. If it was deemed necessary to pass the context LIST, well, it
is just as necessary to have the TABLE available. This is because the list/table in question might not be
the global one, but temporary ones we would use to stage the dialplan on, and then swap into the global
position when things are ready.
We now have one external function for apps to use, "ast_context_find_or_create()" instead of the pre-existing
"find" and "create", as all existing usages used both in tandem anyway.
pbx_config, and pbx_ael, will stage the reloaded dialplan into local lists and tables, and
then call merge_contexts_and_delete, which will merge (now) existing contexts and
priorities from other registrars into this local set by copying them. Then, merge_contexts_and_delete will
lock down the contexts, swap the lists and tables, and unlock (real quick), and then
destroy the old dialplan.
chan_sip.c
chan_iax.c
chan_skinny.c
All the channel drivers that would add regcontexts now use the ast_context_find_or_create now.
chan_sip also includes a small fix to get rid of warnings about removing priorities that never got entered.
apps/app_meetme.c
apps/app_dial.c
apps/app_queue.c
All the apps that added a context/exten/priority were also modified to use ast_context_find_or_create instead.
include/asterisk/pbx.h
ast_context_create() is removed. Find_or_create_ is the new method.
ast_context_find_or_create() interface gets the hashtab added.
ast_merge_contexts_and_delete() gets the local hashtab arg added.
ast_wrlock_contexts_version() is added so you can detect if someone else got a writelock between your readlocking and writelocking.
ast_hashtab_compare_contexts was made public for use in pbx_config/pbx_ael
ast_hashtab_hash_contexts was in like fashion make public.
include/asterisk/pval.h
ast_compile_ael2() interface changed to include the local hashtab table ptr.
main/features.c
For the sake of the parking context, we use ast_context_find_or_create().
main/pbx.c
I changed all the "tree" names to "table" instead. That's because the original
implementation was based on binary trees. (had a free library). Then I moved
to hashtabs. Now, the names move forward too.
refcount field added to contexts, so you can keep track of how many modules
wanted this context to exist.
Some log messages that are warnings were inflated from LOG_NOTICE to LOG_WARNING.
Added some calls to ast_verb(3,...) for debug messages
Lots of little mods to ast_context_remove_extension2, which is now excersized in ways
it was not previously; one definite bug fixed.
find_or_create was upgraded to handle both local lists/tables as well as the globals.
context_merge() was added to do the per-context merging of the old/present contexts/extens/prios into the new/proposed local list/tables
ast_merge_contexts_and_delete() was heavily modified.
ast_add_extension2() was also upgraded to handle changes.
the context_destroy() code was re-engineered to handle the new way of doing things,
by exten/prio instead of by context.
res/ael/pval.c
res/ael/ael.tab.c
res/ael/ael.tab.h
res/ael/ael.y
res/ael/ael_lex.c
res/ael/ael.flex
utils/ael_main.c
utils/extconf.c
utils/conf2ael.c
utils/Makefile
Had to change the interface to ast_compile_ael2(), to include the hashtab ptr.
This ended up involving several external apps. The main gotcha was I had to
include lock.h and hashtab.h in several places.
As a side note, I tested this stuff pretty thoroughly, I replicated the problems
originally reported by Luigi, and made triply sure that reloads worked, and everything
worked thru "stop gracefully". I found a and fixed a few bugs as I was merging into
trunk, that did not appear in my tests of bug6002.
How's this for verbose commit messages?
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@106757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r91783 | russell | 2007-12-07 10:38:48 -0600 (Fri, 07 Dec 2007) | 6 lines
* Add channel locking around datastore operations that expect the channel
to be locked.
* Document why we don't record Local channels in the dialed interfaces list.
* Remove the dialed variable as it isn't needed.
* Restructure some code for clarity and coding guidelines stuff
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@91784 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Event Dial has new headers, to comply with other events
- Source -> Channel Channel name (caller)
- SrcUniqueID -> UniqueID Uniqueid
(new) -> Dialstring Dialstring in app data
(moremanager)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@91407 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r91273 | mmichelson | 2007-12-05 16:35:52 -0600 (Wed, 05 Dec 2007) | 11 lines
The 'G' option for Dial() did not properly handle the case where only a label was
provided. This was due to the fact that the answering channel did not have an extension
set, so ast_parseable_goto would fail. This fix eliminates the call to ast_parseable_goto
on the answering channel since it is a wasteful call. The answering channel and the calling
channel are both directed to the same extension and context, just different priorities, so
we can just copy the values from the calling channel to the answering channel and increment
the answering channel's priority.
(closes issue #11382, reported by jon, patch by me with correction by jon)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@91291 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r90735 | mmichelson | 2007-12-03 17:12:17 -0600 (Mon, 03 Dec 2007) | 22 lines
A big one...
This is the merge of the forward-loop branch. The main change here is that call-forwards can no longer loop.
This is accomplished by creating a datastore on the calling channel which has a linked list of all devices
dialed. If a forward happens, then the local channel which is created inherits the datastore. If, through this
progression of forwards and datastore inheritance, a device is attempted to be dialed a second time, it will simply
be skipped and a warning message will be printed to the CLI. After the dialing has been completed, the datastore
is detached from the channel and destroyed.
This change also introduces some side effects to the code which I shall enumerate here:
1. Datastore inheritance has been backported from trunk into 1.4
2. A large chunk of code has been removed from app_dial. This chunk is the section of code
which handles the call forward case after the channel has been requested but before it has
been called. This was removed because call-forwarding still works fine without it, it makes the
code less error-prone should it need changing, and it made this set of changes much less painful
to just have the forwarding handled in one place in each module.
3. Two new files, global_datastores.h and .c have been added. These are necessary since the datastore
which is attached to the channel may be created and attached in either app_dial or app_queue, so they
need a common place to find the datastore info. This approach was taken in case similar datastores are
needed in the future, there will be a common place to add them.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90873 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This works in much the same way as the automonitor, except that instead of using the monitor
app, it uses the mixmonitor app. By providing an 'x' or 'X' as a dial or queue option, a DTMF
sequence may be entered (as defined in features.conf) to start the one-touch mixmonitor.
This patch also introduces some new API calls to the audiohooks code for searching for an audiohook
by type and for searching for a running audiohook by type.
Big thanks to joetester for writing the initial patch, testing it and patiently waiting for it to
be committed.
(closes issue #10185, reported and patched by xmarksthespot)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90388 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89622 | murf | 2007-11-26 23:24:02 -0700 (Mon, 26 Nov 2007) | 1 line
closes issue #11379; OK, this is an attempt to make both sides happy. To the cdr.conf file, I added the option 'unanswered', which defaults to 'no'. In this mode, you will see a cdr for a call, whether it was answered or not. The disposition will be NO ANSWER or ANSWERED, as appropriate. The src is as you'd expect, the destination channel will be one of the channels from the Dial() call, usually the last in the list if more than one chan was specified. With unanswered set to 'yes', you will still see this cdr entry in both cases. But in the case where the dial timed out, you will also see a cdr for each line attempted, marked NO ANSWER, with no destination channel name. The new option defaults to 'no', so you don't see the pesky extra cdr's by default, and you will not see the irritating 'not posted' messages.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89623 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
using old methods of parsing arguments to using the standard macros. However, the big
change is that the really old way of specifying application and arguments separated by
a comma will no longer work (e.g. NoOp,foo|bar). Instead, the way that has been
recommended since long before 1.0 will become the only method available (e.g. NoOp(foo,bar).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76703 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r75253 | mmichelson | 2007-07-16 13:16:15 -0500 (Mon, 16 Jul 2007) | 8 lines
Restoring functionality from 1.2 wherein Retrydial will not exit if there is no announce file specified.
This change makes it so that if there is no announce file specified, the application will continue until finished (or caller hangs up).
If a bogus announce file is specified, then a warning message will be printed saying that the file could not be found, but execution will
still continue.
(closes issue #10186, reported by jon, patched by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@75254 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the call is answered by another phone, other phones won't display the call as "missed".
You can also add an option to the dial command so that you can have a "followme"
scenario and not count the calls as "missed" when you cancel the call.
Thanks to Ramon and Frank for feedback on this feature.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@74024 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r65200 | murf | 2007-05-18 16:06:27 -0600 (Fri, 18 May 2007) | 9 lines
Merged revisions 65172 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r65172 | murf | 2007-05-18 14:56:20 -0600 (Fri, 18 May 2007) | 1 line
This update will fix the situation that occurs as described by 9717, where when several targets are specified for a dial, if any one them reports FAIL, the whole call gets FAIL, even though others were ringing OK. I rearranged the priorities, so that a new disposition, NULL, is at the lowest level, and the disposition get init'd to NULL. Then, next up is FAIL, and next up is BUSY, then NOANSWER, then ANSWERED. All the related set routines will only do so if the disposition value to be set to is greater than what's already there. This gives the intended effect. So, if all the targets are busy, you'd get BUSY for the call disposition. If all get BUSY, but one, and that one rings is not answered, you get NOANSWER. If by some freak of nature, the NULL value doesn't get overridden, then the disp2str routine will report NOANSWER as before.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@65202 65c4cc65-6c06-0410-ace0-fbb531ad65f3
connect to a channel.
Before committing to 1.4 i would like some other people to
review and test this fix - thanks.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In general this code needs a deep revision, because the body of
do_forward() deletes/overwrites the output channel without freeing
the resouce in some cases, and without notifying the caller.
Also, on FreeBSD with MALLOC_OPTIONS set i am seeing various panics
(duplicate freee etc.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@47881 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the original code this would happen in the case of
o->forwards >= AST_MAX_FORWARDS
Likely an 1.2/1.4 isse as well - please someone have a look,
while I am hunting a few more similar panics now.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@47880 65c4cc65-6c06-0410-ace0-fbb531ad65f3
some possibly missing parts in the privacy screening code.
Now that it is more streamlined it is easier to see differences
in handling the various cases.
Have not tested the code in depth.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@47189 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On passing, avoid two null-pointer string dereference
while printing messages (which are
sometimes not fatal in some platforms, but still wrong).
These two lines at least should be merged to 1.4 once i am
done with all the changes here.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@47180 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Mark with XXX a possible bug in previous code which used
the wrong source in case of a forwarded call.
the function do_forward() needs to be split further, as the initial
part is replicated in another places (with some minor differences, most likely
forgotten when updating after the copy).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@47179 65c4cc65-6c06-0410-ace0-fbb531ad65f3
as usual a bit at a time to ease locating new bugs or fixes
worth merging into other branches.
In this commit, introduce a macro, S_REPLACE, that replaces
a string possibly freeing the previous value.
In one of these places (see the comment marked XXX) the previous
code might leak memory - if so, this ought to be merged in 1.4
The macro might be worth putting in one of the global headers
(e.g. include/asterisk/strings.h) as the construct is used
in a million places in the asterisk code.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@47160 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- restructured build tree and makefiles to eliminate recursion problems
- support for embedded modules
- support for static builds
- simpler cross-compilation support
- simpler module/loader interface (no exported symbols)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@40722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As partly documented in loader.c and include/asterisk/module.h,
modules are now expected to return all of their methods and flags
into a structure 'mod_data', and are normally loaded with RTLD_NOW
| RTLD_LOCAL, so symbols are resolved immediately and conflicts
should be less likely. Only in a small number of cases (res_*,
typically) modules are loaded RTLD_GLOBAL, so they can export
symbols.
The core of the change is only the two files loader.c and
include/asterisk/module.h, all the rest is simply adaptation of the
existing modules to the new API, a rather mechanical (but believe
me, time and finger-consuming!) process whose detail you can figure
out by svn diff'ing any single module.
Expect some minor compilation issue after this change, please
report it on mantis http://bugs.digium.com/view.php?id=6968
so we collect all the feedback in one place.
I am just sorry that this change missed SVN version number 20000!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@20003 65c4cc65-6c06-0410-ace0-fbb531ad65f3
in pbx_exec is always 1 so it can be removed.
This change also takes away ast_exec_extension(), and lets all
switch functions (exists, canmatch, exec, matchmore) all use the same
prototype, which makes the code a bit cleaner.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@16558 65c4cc65-6c06-0410-ace0-fbb531ad65f3
const-ify some more APIs
remove 'type' field from ast_channel, in favor of the one in the channel's tech structure
allow string field module users to specify the 'chunk size' for pool allocations
update chan_alsa to be compatible with recent const-ification patches
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@9060 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r7448 | kpfleming | 2005-12-12 22:25:14 -0600 (Mon, 12 Dec 2005) | 2 lines
use the stream's current point when pausing/unpausing, instead of elapsed time (which doesn't work when the stream has been skipped forward or backward) (issue #5897)
........
r7449 | kpfleming | 2005-12-12 22:43:38 -0600 (Mon, 12 Dec 2005) | 2 lines
only report AGENT_IDLE for callback mode agents when they are actually idle (issue #5902)
........
r7451 | kpfleming | 2005-12-12 23:14:27 -0600 (Mon, 12 Dec 2005) | 2 lines
ensure that hangups while incoming calls are in early state are handled properly (issue #5919)
........
r7453 | kpfleming | 2005-12-12 23:53:00 -0600 (Mon, 12 Dec 2005) | 2 lines
restore ability of caller to hangup calls that are still ringing (issue #5839)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@7457 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sean Bright
Tilghman Lesher
Steve Murphy
Kevin P. Fleming
Mark Michelson
Jeff Peeler
Russell Bryant
Michiel van Baak
Joshua Colp
Terry Wilson
Olle Johansson
Jason Parker
Luigi Rizzo
Matthew Fredrickson
Matt O'Gorman
Mark Spencer
BJ Weschke
Jim Dixon