3459 Commits (acb614d5aeb9cb19d2ded895fff585575fcb24c0)

Author	SHA1	Message	Date
zuul	acb614d5ae	Merge "res_pjsip_mwi_body_generator: Re-order the body items" into 13	10 years ago
Joshua Colp	e3c9ad6382	Merge "res_pjsip: add "via_addr", "via_port", "call_id" to contact" into 13	10 years ago
zuul	eff382c72b	Merge "res_pjsip: Add clarifying documentation to PJSIP_HEADER help text" into 13	10 years ago
zuul	856d6e34c3	Merge "res_pjsip: chatty verbose messages" into 13	10 years ago
George Joseph	fe305ccf01	res_pjsip_mwi_body_generator: Re-order the body items ... Re-ordered the body items so Message-Account is second. Messages-Waiting: no Message-Account: sip:1571@<IP Removed>:5060 Voice-Message: 0/0 (0/0) ASTERISK-26065 #close Reported-by: Ross Beer Change-Id: If5d35a64656eac98c2dd5e490cc0b2807bed80c3	10 years ago
Rusty Newton	37d039fdf3	res_pjsip: Add clarifying documentation to PJSIP_HEADER help text ... Added notes about when you can read or write headers. Specifically about being able to read on the inbound channel and write on an outbound channel. ASTERISK-26063 #close Reported by: Private Name Tested by: Rusty Newton Change-Id: Ibeb64af17d1f6451028b3c29855a3f151a01d8c5	10 years ago
Richard Mudgett	03d5b3ce5c	pjsip_distributor.c: Use correct rdata info access method. ... The pjproject doxygen for rdata->msg_info.info says to call pjsip_rx_data_get_info() instead of accessing the struct member directly. You need to call the function mostly because the function will generate the struct member value if it is not already setup. Change-Id: Iafe8b01242b7deb0ebfdc36685e21374a43936d2	10 years ago
Alexei Gradinari	230686f4ec	res_pjsip: add "via_addr", "via_port", "call_id" to contact ... As res_pjsip_nat rewrites contact's address, only the last Via header can contain the source address of registered endpoint. Also Call-Id header may contain the source address of registered endpoint. Added "via_addr", "via_port", "call_id" to contact. Added new fields ViaAddress, CallID to AMI event ContactStatus. ASTERISK-26011 Change-Id: I36bcc0bf422b3e0623680152d80486aeafe4c576	10 years ago
Alexei Gradinari	04c12561a7	res_pjsip: chatty verbose messages ... There are a lot of verbose messages about Endpoint and Contact status changes if there are many dynamic endpoints. The patch sets verbose level 2 for Endpoint status changes and verbose level 3 for Contact status changes. ASTERISK-26055 #close Change-Id: Ie64e261ddbbc41bfff0f0190241152cc123fe6d7	10 years ago
Mark Michelson	c0b190dd9a	res_pjsip: Match dialogs on responses better. ... When receiving an incoming response to a dialog-starting INVITE, we were not matching the response to the INVITE dialog. Since we had not recorded the to-tag to the dialog structure, the PJSIP-provided method to find the dialog did not match. Most of the time, this was not a problem, because there is a fall-back that makes the response get routed to the same serializer that the request was sent on. However, in cases where an asynchronous DNS lookup occurs in the PJSIP core, the thread that sends the INVITE is not actually a threadpool serializer thread. This means we are unable to record a serializer to handle the incoming response. Now, imagine what happens when an INVITE is sent on a non-serialized thread, and an error response (such as a 486) arrives. The 486 ends up getting put on some random threadpool thread. Eventually, a hangup task gets queued on the INVITE dialog serializer. Since the 486 is being handled on a different thread, the hangup task can execute at the same time that the 486 is being handled. The hangup task assumes that it is the sole owner of the INVITE session and channel, so it ends up potentially freeing the channel and NULLing the session's channel pointer. The thread handling the 486 can crash as a result. This change has the incoming response match the INVITE transaction, and then get the dialog from that transaction. It's the same method we had been using for matching incoming CANCEL requests. By doing this, we get the INVITE dialog and can ensure that the 486 response ends up being handled by the same thread as the hangup, ensuring that the hangup runs after the 486 has been completely handled. ASTERISK-25941 #close Reported by Javier Riveros Change-Id: I0d4cc5d07e2a8d03e9db704d34bdef2ba60794a0	10 years ago
Joshua Colp	ddcf983e39	res_sorcery_astdb: Filter fields to only the registered ones. ... This change introduces the same filtering that is done in res_sorcery_realtime to the res_sorcery_astdb module. This allows persisted sorcery objects that may contain unknown fields to still be read in from the AstDB and used. This is particularly useful when switching between different versions of Asterisk that may have introduced additional fields. ASTERISK-26014 #close Change-Id: Ib655130485a3ccfd635b7ed5546010ca14690fb2	10 years ago
Joshua Colp	3296d2d194	Merge "res_pjsip_empty_info: Respond to empty SIP INFO packets" into 13	10 years ago
Joshua Colp	f09f923514	Merge "res_pjsip_outbound_publishing: After unloading the library won't load again" into 13	10 years ago
Joshua Colp	4e4a991d90	Merge "res_pjsip: Endpoint IP Access Controls" into 13	10 years ago
snuffy	39fedfa423	res_pjsip_empty_info: Respond to empty SIP INFO packets ... Some SBCs require responses to empty SIP INFO packets after establishing call via INVITE, if not responded to they may drop your call after unspecified timeout of X minutes. They are identified by having no Content-Type, check for this and respond with 200 - OK message. ASTERISK-24986 #close Reported-by: Ilya Trikoz, Federico Santulli Change-Id: Ib27e4f07151e5aef28fa587e4ead36c5b87c43e0	10 years ago
Joshua Colp	7d986ff3f6	Merge "res_pjsip_outbound_publish: Ref leak in off nominal callback paths" into 13	10 years ago
Joshua Colp	4a04a5a3ec	Merge "res/res_hep_pjsip: Fix reported local IP address when bound to 'any'" into 13	10 years ago
Joshua Colp	811a54836d	Merge "res_pjsip_outbound_publish: state potential dropped on reloads/realtime fetches" into 13	10 years ago
Joshua Colp	cceccd68ad	Merge "res_pjsip_outbound_publish: Potential crash due to off nominal path" into 13	10 years ago
Joshua Colp	4509aa890f	Merge "res_pjsip_outbound_publish: Won't unload if condition wait times out" into 13	10 years ago
George Joseph	3f6ef63099	res_pjsip_outbound_registration: Clean up state when registration is deleted ... Nothing was cleaning up the registration state object when ast_sorcery_delete was called on a registration. So, the registration was deleted from sorcery but the state object went right on refreshing the registration (or failing to refresh the registration) with the peer. * Added a 'deleted' observer on registration that removes the state object. ASTERISK-25964 #close Reported-by Matt Jordan Change-Id: I2db792145cdb1f72ebbf57dd9099596dbbf12c23	10 years ago
George Joseph	b6f9392a12	res_pjsip: Set TCP_NODELAY on TCP transports ... Although it's perfectly legal to place multiple SIP messages in the same packet, it can cause problems because the Linux default is to enable Path MTU Discovery which sets the Don't Fragment bit on the packets. If adding a second message to the packet causes the MTU to be exceeded, and the destination isn't equipped to send a FRAGMENTATION NEEDED response to a large packet, the packet will just be dropped. We can't specifically tell the stack to send only 1 message per packet, but we can turn on TCP_NODELAY when we create the transport. This will at least tell the stack to send packets as soon as possible. ASTERISK-26005 #close Reported-by: Ross Beer Change-Id: I820f23227183f2416ca5e393bec510e8fe1c8fbd	10 years ago
Matt Jordan	f91a7dc993	res/res_hep_pjsip: Fix reported local IP address when bound to 'any' ... When bound to an 'any' address, e.g., 0.0.0.0, PJSIP reports as its local address the 'any' address, as opposed to the IP address we actually received the packet on. This can cause some confusion in Homer, as it will dutifully report what we send it. This patch uses the PJSIP inspection routines to determine which IP address we probably received the packet on based on the remote party's IP address. In the event that this fails, it falls back to the IP address natively reported by the transport. Change-Id: I076f835d2aef489e1ee1d01595b211eb2ce62da3	10 years ago
Sean Bright	9de5cd209e	res_ari: Correct Location headers returned by some ARI resources ... The Location headers returned by: * /bridges/{bridgeId}/play * /bridges/{bridgeId}/record * /channels/{channelId}/play * /channels/{channelId}/record Did not have the '/ari' prefix, and in the case of the 'play' resources, were using 'playback' instead of 'playbacks.' Change-Id: I957c58a3a1471bf477dae7c67faa1b74fcd9241c	10 years ago
zuul	e6a946400f	Merge "res_hep: Provide an option to pick the UUID type" into 13	10 years ago
zuul	c735ce1a05	Merge "config_transport: Tell pjproject to allow all SSL/TLS protocols" into 13	10 years ago
Alexei Gradinari	524a302974	res_pjsip: Endpoint IP Access Controls ... With the old SIP module we can use IP access controls per peer. PJSIP module missing this feature. This patch added next configuration Endpoint options: "acl" - list of IP ACL section names in acl.conf "deny" - List of IP addresses to deny access from "permit" - List of IP addresses to permit access from "contact_acl" - List of Contact ACL section names in acl.conf "contact_deny" - List of Contact header addresses to deny "contact_permit" - List of Contact header addresses to permit This patch also better logging failed request: add custom message instead of "No matching endpoint found" add SIP method to logging ASTERISK-25900 Change-Id: I456dea3909d929d413864fb347d28578415ebf02	10 years ago
Matt Jordan	89ae4466ea	res_hep: Provide an option to pick the UUID type ... At one point in time, it seemed like a good idea to use the Asterisk channel name as the HEP correlation UUID. In particular, it felt like this would be a useful identifier to tie PJSIP messages and RTCP messages together, along with whatever other data we may eventually send to Homer. This also had the benefit of keeping the correlation UUID channel technology agnostic. In practice, it isn't as useful as hoped, for two reasons: 1) The first INVITE request received doesn't have a channel. As a result, there is always an 'odd message out', leading it to be potentially uncorrelated in Homer. 2) Other systems sending capture packets (Kamailio) use the SIP Call-ID. This causes RTCP information to be uncorrelated to the SIP message traffic seen by those capture nodes. In order to support both (in case someone is trying to use res_hep_rtcp with a non-PJSIP channel), this patch adds a new option, uuid_type, with two valid values - 'call-id' and 'channel'. The uuid_type option is used by a module to determine the preferred UUID type. When available, that source of a correlation UUID is used; when not, the more readily available source is used. For res_hep_pjsip: - uuid_type = call-id: the module uses the SIP Call-ID header value - uuid_type = channel: the module uses the channel name if available, falling back to SIP Call-ID if not For res_hep_rtcp: - uuid_type = call-id: the module uses the SIP Call-ID header if the channel type is PJSIP and we have a channel, falling back to the Stasis event provided channel name if not - uuid_type = channel: the module uses the channel name ASTERISK-25352 #close Change-Id: Ide67e59a52d9c806e3cc0a797ea1a4b88a00122c	10 years ago
zuul	1705c5d2ba	Merge "pjsip_distributor: Add missing newline to NOTICE" into 13	10 years ago
George Joseph	e2df15bae9	pjsip_distributor: Add missing newline to NOTICE ... There was a newline missing from the end of the "no matching endpoint" notice. Change-Id: Idc11fe5bc0354072291663dbffe648c471e39181	10 years ago
Sebastian Damm	a94a12bbf7	res_pjsip_outbound_registration: generate correct Contact URI for TLS ... There are two types of SIP URIs indicating a secure transport: * sips:user@example.org * sip:user@example.org;transport=tls When using a sips URI, Asterisk checks incoming INVITEs and answers from the other side for sips URIs, and rejects the packet if there are only sip URIs. So Asterisk should only generate a sips Contact URI if the other side supports it. This patch makes Asterisk generate either a sip or sips Contact URI depending on the format of the server URI. If you want a sip URI, use: server_uri=sip:example.org\;transport=tls If you want a sips URI, use: server_uri=sips:example.org ASTERISK-25990 #close Reported-by: Sebastian Damm Change-Id: I5ae57d6531ce940b5fc64d5cd2673e60db0f9ba2	10 years ago
zuul	a01ce2b889	Merge "res_pjsip: improve realtime performance" into 13	10 years ago
Kevin Harwell	49b25a0956	res_pjsip_outbound_publish: state potential dropped on reloads/realtime fetches ... When reloading, or fetching realtime data, if the "apply" failed for any numerous reasons the current state object would not be maintained. This potentially resulted in publishes being stopped for some states/clients when they should not have been. This patch makes it so the current state object is kept upon any type of reload/ fetch failures. Change-Id: Iab6020c116d628ed2ae81183e987e2eaa3c90b30	10 years ago
Kevin Harwell	1b5c91b7be	res_pjsip_outbound_publish: Potential crash due to off nominal path ... It was possible for the explicit publish destroy function to be called without the pjsip client ever being initialized. This fix checks to make sure there is a client to destroy before attempting. Change-Id: I8eea1bfa3bd472149bfc255310be2a6248688f5c	10 years ago
Kevin Harwell	10de553c9d	res_pjsip_outbound_publishing: After unloading the library won't load again ... The same thing was happening in res_pjsip_publish_asterisk. When the library was unloaded it did not unregister the object type from sorcery. Subsequent loads resulted in a failed load due to the sorcery type already existing. Change-Id: Ifdc25e94e4cd40bc5a19eb4d0a00b86c2e9fedc9	10 years ago
Kevin Harwell	1a833b9739	res_pjsip_outbound_publish: Ref leak in off nominal callback paths ... There were a few spots where the client object's reference was being leaked in sip_outbound_publish_callback. This patch cleans up those leaks. Change-Id: I485d0bc9335090f373026f77c548042e258461df	10 years ago
Kevin Harwell	4752ef02e0	res_pjsip_outbound_publish: Won't unload if condition wait times out ... When res_pjsip_outbound_publish unloads it has to wait for all current publishing objects to get done. However if the wait condition times out then it does not fail the unload. This sometimes results in an infinite loop check while unloading. This patch now fails the unload operation if the condition times out. Change-Id: Id57b8cbed9d61222690fcba1e4f18e259df4c7ec	10 years ago
zuul	81773ceb9c	Merge "res_fax/t38_gateway: Peer V.21 session is created on wrong channel" into 13	10 years ago
Kevin Harwell	4d063814ba	res_pjsip_authenticator_digest: Don't use source port in nonce verification ... From the issue reporter: "res_pjsip_outbound_authenticator_digest builds a nonce that is a hash of the timestamp, the source address, the source port, a server UUID that is calculated at startup, and the authentication realm. Rather than caching nonces that we create, we instead attempt to re-calculate the nonce when receiving an incoming request with authentication. We then compare the re-calculated nonce to the incoming nonce, and if they don't match, then authentication has failed early. The problem is that it is possible, especially when using TCP, to receive two requests from the same endpoint but have differing source ports for those requests. Asterisk itself commonly will use different source ports for outbound TCP requests." This patch removes the source port dependency when building the nonce. ASTERISK-25978 #close Change-Id: I871b5f4adce102df1c4988066283095ec509dffe	10 years ago
George Joseph	fb6227a372	config_transport: Tell pjproject to allow all SSL/TLS protocols ... The default tls settings for pjproject only allow TLS 1, TLS 1.1 and TLS 1.2. SSL is not allowed. So, even if you specify "sslv3" for a transport method, it's silently ignored and one of the TLS protocols is used. This was a new behavior of pjsip_tls_setting_default() in 2.4 (when tls.proto was added) that we never caught. Now we need to set tls.proto = 0 after we call pjsip_tls_setting_default(). This tells pjproject to set the socket protocol to match the method. ASTERISK-26004 #close Change-Id: Icfb55c1ebe921298dedb4b1a1d3bdc3ca41dd078	10 years ago
Alexei Gradinari	72eb7c8301	res_pjsip: module load priority ... The res_pjsip_authenticator_digest, res_pjsip_endpoint_identifier_* and res_pjsip_registrar modules should load ASAP to avoid "No matching endpoint found" for legitimate endpoint. ASTERISK-25994 Change-Id: Iac95d95ad031e0be104189d29e923a2ad7c24a1b	10 years ago
Alexei Gradinari	9c2032240e	res_pjsip: improve realtime performance ... This patch modified pjsip_options to retrieve only permament contacts for aor if the qualify_frequency is > 0 and persisted contacts if the qualify_frequency is > 0. This patch also fixed a bug in res_sorcery_astdb. res_sorcery_astdb doesn't save object data retrived from astdb. ASTERISK-25826 Change-Id: I1831fa46c4578eae5a3e574ee3362fddf08a1f05	10 years ago
zuul	168a7b3dd8	Merge "res_fax: add FAXMODE variable" into 13	10 years ago
Alexei Gradinari	7a14e669f0	res_pjsip/AMI: add contact.updated event ... With the old SIP module AMI sends PeerStatus event on every successfully REGISTER requests, ie, on start registration, update registration and stop registration. With PJSIP AMI sends ContactStatus only when status is changed. Regarding registration: on start registration - Created on stop registration - Removed but on update registration nothing This patch added contact.updated event. ASTERISK-25904 Change-Id: I8fad8aae9305481469c38d2146e1ba3a56d3108f	10 years ago
Alexei Gradinari	06d4ac0355	res_fax: add FAXMODE variable ... The app_fax set FAXMODE variable, but res_fax missing this feature. This patch add FAXMODE variable which is set to either "audio" or "T38". ASTERISK-25980 Change-Id: Ie3dcbfb72cc681e9e267a60202f7fb8723a51b6b	10 years ago
Alexei Gradinari	2d17fe06c5	res_fax/t38_gateway: Peer V.21 session is created on wrong channel ... The channel and peer V.21 sessions are created on the same channel now. The peer V.21 session should be created only on peer channel when one of channel can handle T.38. Also this patch enable debug for T.38 gateway session if global fax debug enabled. ASTERISK-25982 Change-Id: I78387156ea521a77eb0faf170179ddd37a50430e	10 years ago
Alexei Gradinari	3cb8934de0	pjsip: Added "reg_server" to contacts. ... If the Asterisk system name is set in asterisk.conf, it will be stored into the "reg_server" field in the ps_contacts table to facilitate multi-server setups. ASTERISK-25931 Change-Id: Ia8f6bd2267809c78753b52bcf21835b9b59f4cb8	10 years ago
Joshua Colp	d65023b5a5	Merge "res_pjsip: Start body generator users after suppliers." into 13	10 years ago
zuul	3e5666eadc	Merge "res_pjsip_pubsub.c: Fix body generator registration race." into 13	10 years ago
Joshua Colp	1ce30f1fb5	Merge "res_pjsip_outbound_publish.c: Remove redundant flag check." into 13	10 years ago