asterisk

Commit Graph

Author	SHA1	Message	Date
Friendly Automation	7172230cd0	Merge "chan_sip: in case of tcp/tls, be less annoying about tx errors." into 16	6 years ago
Friendly Automation	a3edac10a6	Merge "confbridge: Add support for specifying maximum sample rate." into 16	6 years ago
Sean Bright	a78758d0a2	config.c: Skip UTF-8 BOMs if present when reading config files ASTERISK-28667 #close Change-Id: I4767ed365c98f3e1587b7653321048a31d8a53b2	6 years ago
George Joseph	4b658c82b9	Merge "res_rtp_asterisk: Add frame list cleanups to ast_rtp_read" into 16	6 years ago
Joshua C. Colp	a55566b680	Merge "sip_to_pjsip.py: Fix trustrpid typo" into 16	6 years ago
Joshua C. Colp	82e2f0c662	Merge "configure: Add check for MySQL client bool and my_bool type usage." into 16	6 years ago
Friendly Automation	d11534515b	Merge "res_pjsip_session: Set stream state on created streams for incoming SDP." into 16	6 years ago
Pascal Cadotte Michaud	b8e635916f	sip_to_pjsip.py: Fix trustrpid typo ASTERISK-28664 #close Change-Id: I6c28b1002fd7075ae0ed36f026f8c1855c9418a6	6 years ago
George Joseph	b058e2b409	Merge "res_pjsip_nat: Restore original contact for REGISTER responses" into 16	6 years ago
Joshua C. Colp	7167fd6d46	configure: Add check for MySQL client bool and my_bool type usage. Instead of trying to use the defined MySQL client version from the header use a configure check to determine whether the bool or my_bool type should be used for defining a boolean. ASTERISK-28604 Change-Id: Id2225b3785115de074c50c123ff1a68005b4a9c7	6 years ago
Joshua C. Colp	5622df0a94	confbridge: Add support for specifying maximum sample rate. ConfBridge has the ability to move between different sample rates for mixing the conference bridge. Up until now there has only been the ability to set the conference bridge to mix at a specific sample rate, or to let it move between sample rates as necessary. This change adds the ability to configure a conference bridge with a maximum sample rate so it can move between sample rates but only up to the configured maximum. ASTERISK-28658 Change-Id: Idff80896ccfb8a58a816e4ce9ac4ebde785963ee	6 years ago
Friendly Automation	298dd7832b	Merge "PJSIP_CONTACT: add missing argument documentation" into 16	6 years ago
Joshua Colp	8af35e7aa4	Merge "ACL: ast_apply_acl_nolog - identical to ast_apply_acl but without logging." into 16	6 years ago
Joshua C. Colp	186c4e9b36	res_pjsip_session: Set stream state on created streams for incoming SDP. A previous review, 13174, made a change whereby on an incoming offer SDP the pending topology was initialized to the configured. This caused a problem for bundle with WebRTC where bundle could reference a stream that did not actually exist if the configuration had both audio and video but the offer SDP only contained audio. This change undoes that review and instead fixes the original problem it sought to solve by setting the state of created streams based on the contents of the offer SDP. This way the stream state is not inactive until negotiation later completes. ASTERISK-28659 Change-Id: Ic5ae5a86437d3e686ac5afd91d133cc916198355	6 years ago
Kevin Harwell	d17bbcb9f1	res_fax: wrap v21 detected Asterisk initiated negotiation with config option A previous patch: Gerrit Change-Id: I73bb24799bfe1a48adae9c034a2edbae54cc2a39 made it so a T.38 Gateway tries to negotiate with both sides by sending T.38 negotiation request to both endpoints supported T.38 versus the previous behavior of forwarding negotiation to the "other" channel once a preamble was detected. This had the unfortunate side effect of breaking some setups. Specifically ones that set the max datagram option on an endpoint configuration (configured max datagram was not propagated since Asterisk now initiates negotiations). This patch adds a configuration option, "negotiate_both", that when enabled makes it so Asterisk initiates the negotiation requests to both endpoints vs. the previous behavior of waiting, and forwarding the request. The default is disabled keeping with the old behavior. ASTERISK-28660 Change-Id: I5deb875f3485e20bc75119ec743090655d864a1a	6 years ago
Frederic LE FOLL	aa06c6ea29	app_chanisavail/cdr: ChanIsAvail sometimes fails to deactivate CDR. Temporary channel lifespan is very short and CDR deactivation request through ast_cdr_set_property() may happen when CDR is not available yet. Use CDR_PROP() dialplan function instead, it will first wait for pending CDR insertion requests to be processed. ASTERISK-28636 Change-Id: I1cbe09e8d2169c0962c1195133ff260d291f2074	6 years ago
Asterisk Development Team	9240fcd8bb	Update CHANGES and UPGRADE.txt for 16.7.0	6 years ago
Jaco Kroon	77941efad9	ACL: ast_apply_acl_nolog - identical to ast_apply_acl but without logging. Due to use in res_rtp_asterisk there is a need to be able to apply an ACL without logging any invalid/denies. It's probably sensible to at least validate the ACL once directly after load and report invalid ACLs. Change-Id: I256169229d945ca7c1bbf228fc492d91df345843 Signed-off-by: Jaco Kroon <jaco@uls.co.za>	6 years ago
Pascal Cadotte Michaud	2d2b28bfa4	PJSIP_CONTACT: add missing argument documentation add missing argument "rtt" and "status" to the documentation The change to the dtd file allow an enumlist to contain one or many configOptionToEnum or enum. This is different from the previous patch I submitted when you could have a configOptionToEnum or (a configOptionToEnum followed by one or manu enums) or (one or many enums) ASTERISK-28626 Change-Id: Ia71743ee7ec813f40297b0ddefeee7909db63b6d	6 years ago
George Joseph	4631e77078	Merge "Revert "PJSIP_CONTACT: add missing argument documentation"" into 16	6 years ago
Joshua Colp	9c29c3fb3e	Revert "PJSIP_CONTACT: add missing argument documentation" This reverts commit `174e6426aa`. Reason for revert: Regression in XML validation. validity error : Content model of enumlist is not determinist: (configOptionToEnum \| (configOptionToEnum , enum+) \| enum+) As we are preparing to do releases and this is not critical I am reverting this for now until resolved. Change-Id: I2c9656fb40b2d2f56f54caa35c8be02cc92babd0	6 years ago
George Joseph	8af0dea0c7	res_rtp_asterisk: Add frame list cleanups to ast_rtp_read In Asterisk 16+, there are a few places in ast_rtp_read where we've allocated a frame list but return a null frame instead of the list. In these cases, any frames left in the list won't be freed. In the vast majority of the cases, the list is empty when we return so there's nothing to free but there have been leaks reported in the wild that can be traced back to frames left in the list before returning. The escape paths now all have logic to free frames left in the list. ASTERISK-28609 Reported by: Ted G Change-Id: Ia1d7075857ebd26b47183c44b1aebb0d8f985f7a	6 years ago
Friendly Automation	59799b10bf	Merge "res_pjsip_registrar.c: Prevent potential double free if AOR is not found" into 16	6 years ago
Joshua Colp	585e5288c8	Merge "app_queue: Fix old confusing comment about when the members are called" into 16	6 years ago
Jaco Kroon	055737d645	chan_sip: in case of tcp/tls, be less annoying about tx errors. chan_sip.c:3782 __sip_xmit: sip_xmit of 0x7f1478069230 (len 600) to 213.150.203.60:1492 returned -2: Interrupted system call returned -2 implies this wasn't actually an OS error, so errno makes no sense either. Internal error was already logged higher up, and -2 generally means that either there isn't a valid connection available, or the pipe notification failed, and that is already correctly logged. ASTERISK-28651 #close Change-Id: I46eb82924beeff9dfd86fa6c7eb87d2651b950f2 Signed-off-by: Jaco Kroon <jaco@uls.co.za>	6 years ago
George Joseph	63b8664bfa	res_pjsip_nat: Restore original contact for REGISTER responses RFC3261 Section 10 "Registrations", specifically paragraph "10.2.4: Refreshing Bindings", states that a user agent compares each contact address (in a 200 REGISTER response) to see if it created the contact. If the Asterisk endpoint has the rewrite_contact option set however, the contact host and port sent back in the 200 response will be the rewritten one and not the one sent by the user agent. This prevents the user agent from matching its own contact. Some user agents get very upset when this happens and will not consider the registration successful. While this is rare, it is acceptable behavior especially if more than 1 user agent is allowed to register to a single endpoint/aor. This commit updates res_pjsip_nat (where rewrite_contact is implemented) to store the original incoming Contact header in a new "x-ast-orig-host" URI parameter before rewriting it, and to restore the original host and port to the Contact headers in the outgoing response. This is only done if the request is a REGISTER and rewrite_contact is enabled. pjsip_message_filter was also updated to ensure that if a request comes in with any existing x-ast-* URI parameters, we remove them so they don't conflict. Asterisk will never send a request with those headers in it but someone might just decide to add them to a request they craft and send to Asterisk. NOTE: If a device changes its contact address and registers again, it's a NEW registration. If the device didn't unregister the original registration then all existing behavior based on aor/remove_existing and aor/max_contacts apply. ASTERISK-28502 Reported-by: Ross Beer Change-Id: Idc263ad2d2d7bd8faa047e5804d96a5fe1cd282e	6 years ago
George Joseph	7f2bbff48c	Merge "channel.c: Resolve issue with receiving SIP INFO packets for DTMF" into 16	6 years ago
Friendly Automation	439d42a594	Merge "res_pjsip_outbound_registration: add support for SRV failover" into 16	6 years ago
Friendly Automation	c1176286a2	Merge "res_pjsip_registrar.c: Prevent possible buffer overflow with domain aliases" into 16	6 years ago
Joshua Colp	440ffa4b3d	Merge "chan_sip+native_bridge_rtp: no directmedia for ptime other than default ptime." into 16	6 years ago
Friendly Automation	7620d1256c	Merge "PJSIP_CONTACT: add missing argument documentation" into 16	6 years ago
Kevin Harwell	1ea4f0e7c5	Merge "res_pjsip_session.c: Prevent use-after-free with TEST_FRAMEWORK enabled" into 16	6 years ago
Kevin Harwell	7f843116d3	Merge "parking: Fall back to parker channel name even if it matches parkee." into 16	6 years ago
Sean Bright	68ce999351	res_pjsip_registrar.c: Prevent potential double free if AOR is not found The simple fix here is simply to NULL out username and password after we call ast_free on them. Unfortunately, I noticed that we weren't checking for allocation failures for username and password, and adding those checks made things noisy and cumbersome. So instead we partially rollback the recent LGTM patch, and move the alloca calls into find_aor_name(). ASTERISK-28641 #close Reported by: Ross Beer Change-Id: Ic9d01624e717a020be0b0aee31f0814e7f1ffbe2	6 years ago
Sean Bright	5c20cc4c3a	res_pjsip_registrar.c: Prevent possible buffer overflow with domain aliases We're appropriately sizing the id_domain_alias buffer, but then copying the data into the id_domain one. We were then using the uninitialized id_domain_alias buffer we just allocated. This is ASTERISK~28641 adjacent, but significant enough to warrant its own patch. Change-Id: I81c38724d18deab8c6573153e2b99dbb6e2f33d9	6 years ago
Walter Doekes	161e762742	app_queue: Fix old confusing comment about when the members are called ASTERISK-28644 Change-Id: I2771a931d00a8fc2b9f9a4d1a33ea8f1ad24e06b	6 years ago
Sean Bright	fbc80db350	res_pjsip_session.c: Prevent use-after-free with TEST_FRAMEWORK enabled We need to copy the endpoint name before we call ao2_cleanup() on it, otherwise we might try to access memory that has been reclaimed. ASTERISK-28445 #close Reported by: Bernhard Schmidt Change-Id: I404b952608aa606e0babd3c4108346721fb726b3	6 years ago
George Joseph	dd07ac6a3a	Merge "media_cache.c: Various CLI improvements" into 16	6 years ago
George Joseph	43d4c0e3c9	channel.c: Resolve issue with receiving SIP INFO packets for DTMF The problem is essentially the same as in ASTERISK~28245. Besides the direct media scenario we have an additional scenario where a special client is involved. This device mutes audio by default in transmit direction (no rtp frames) and activates audio only by a foot switch. In this situation dtmf input (pin for conferences, transfer features codes , etc) using SIP INFO mode is not understood properly especially when SIP INFO messages are sent quickly. This patch ensures that SIP INFO frames are properly queued and processed in the above scenario. The patch also corrects situations where successive dtmf events are received quicker than the signalled event duration (plus minimum gap/pause) allows, i.e. DTMF events have to be buffered in the ast channel read queue and emulation has to be processed asynchronously at slower speed. Reported by: Thomas Arimont patches: trigger_dtmf_emulation.patch submitted by Thomas Arimont (license 5525) Change-Id: I309bf61dd065c9978c8e48f5b9a936ab47de64c2	6 years ago
George Joseph	80199cd67f	CI: Turn off shallow cloning altogether Change-Id: I73ed4aef33a92f20080128aafc34e19fd4457196	6 years ago
Joshua Colp	328a6b2381	Merge "res_pjsip_t38: T.38 error correction mode selection at 200 ok received" into 16	6 years ago
Frederic LE FOLL	31173f6586	chan_sip+native_bridge_rtp: no directmedia for ptime other than default ptime. During capabilities selection (joint capabilities of us and peer, configured capability for this peer, or general configured capabilities), if sip_new() does not keep framing information, then directmedia activation will fail for any framing different from default framing. ASTERISK-28637 Change-Id: I99257502788653c2816fc991cac7946453082466	6 years ago
Joshua Colp	c91b28c72d	parking: Fall back to parker channel name even if it matches parkee. ASTERISK-28631 Change-Id: Ia74d084799fbb9bee3403e30d2391aacd46243cc	6 years ago
Sean Bright	bd3cb1b300	media_cache.c: Various CLI improvements * Use ast_cli_completion_add() to improve performance when large number of cached items are present. * Only complete one URI for commands that only accept a single URI. * Change command documentation to wrap at 80 characters to improve readability. Change-Id: Iedb0a2c3541e49561bc231dca2dcc0ebd8612902	6 years ago
Asterisk Development Team	9eb86a8110	Update CHANGES and UPGRADE.txt for 16.6.2	6 years ago
Salah Ahmed	efef44985d	res_pjsip_t38: T.38 error correction mode selection at 200 ok received if asterisk offer T38 SDP with none error correction scheme and the endpoint respond with redundancy EC scheme, asterisk switch to that mode. Since we configure the endpoint as none EC mode we should not switch to any other mode except none. following logic implemented in code. 1. If asterisk offer none, and anything except none in answer will be ignored. 2. If asterisk offer fec, answer with fec, redundancy and none will be accepted. 3. If asterisk offer redundancy, answer with redundancy and none will be accepted. ASTERISK-28621 Change-Id: I343c62253ea4c8b7ee17abbfb377a4d484a14b19	6 years ago
Friendly Automation	5802e32d47	Merge "chan_sip.c: Prevent address change on unauthenticated SIP request." into 16	6 years ago
Kevin Reeves	e013f502b1	main/file.c: Limit media cache usage to remote files. When testing for the existance of a file, the media cache is searched even if the file has no chance of being in it. This can cause performance issues as the media cache size increases. As a result, calls to applications like Read and Playback using local files must scan through the media cache before playing. Under load and with a large cache, this can delay the playback of those files. This patch updates the function that checks for the existance of a file to only consult the media cache database if the requested file is a remote path. It introduces a new is_remote_path() function in main/file.c. ASTERISK-28625 #close Reported-by: kevin@phoneburner.com Change-Id: If91137493732d9034dafa381c081c69274a7dcc9	6 years ago
Ben Ford	8cdaa93e65	chan_sip.c: Prevent address change on unauthenticated SIP request. If the name of a peer is known and a SIP request is sent using that peer's name, the address of the peer will change even if the request fails the authentication challenge. This means that an endpoint can be altered and even rendered unusuable, even if it was in a working state previously. This can only occur when the nat option is set to the default, or auto_force_rport. This change checks the result of authentication first to ensure it is successful before setting the address and the nat option. ASTERISK-28589 #close Change-Id: I581c5ed1da60ca89f590bd70872de2b660de02df	6 years ago
George Joseph	7574be5110	manager.c: Prevent the Originate action from running the Originate app If an AMI user without the "system" authorization calls the Originate AMI command with the Originate application, the second Originate could run the "System" command. Action: Originate Channel: Local/1111 Application: Originate Data: Local/2222,app,System,touch /tmp/owned If the "system" authorization isn't set, we now block the Originate app as well as the System, Exec, etc. apps. ASTERISK-28580 Reported by: Eliel Sardañons Change-Id: Ic4c9dedc34c426f03c8c14fce334a71386d8a5fa	6 years ago

... 2 3 4 5 6 ...

32479 Commits (acaf24e23cf383085afbca403d03aa7bdecfe816) All Branches Search

32479 Commits (acaf24e23cf383085afbca403d03aa7bdecfe816)

All Branches