69 Commits (a82557627740d7b1794e2b279cd89e2bde0d5280)

Author	SHA1	Message	Date
Matthew Jordan	8018b879a2	Clean up doxygen warnings ... This patch fixes numerous doxygen warnings across Asterisk. It also updates the makefile to regenerate the doxygen configuration on the local system before running doxygen to help prevent warnings/errors on the local system. Much thanks to Andrew for tackling one of the Asterisk janitor projects! (issue ASTERISK-20259) Reported by: Andrew Latham Patches: doxygen_partial.diff uploaded by Andrew Latham (license 5985) make_progdocs.diff uploaded by Andrew Latham (license 5985) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371989 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	35bf5efeaf	Convert sig_pri to use a global callback table. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370893 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	d2ac624b87	Clear ISDN channel resetting state if the peer continues to use it. ... Some ISDN switches occasionally fail to send a RESTART ACKNOWLEDGE in response to a RESTART request. * Made the second SETUP received after sending a RESTART request clear the channel resetting state as if the peer had sent the expected RESTART ACKNOWLEDGE before continuing to process the SETUP. The peer may not be sending the expected RESTART ACKNOWLEDGE. (issue ASTERISK-19608) (issue AST-844) (issue AST-815) Patches: jira_ast_815_v1.8.patch (license #5621) patch uploaded by rmudgett (modified) ........ Merged revisions 363687 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 363688 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363689 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	c7cb03a975	Add ability to ignore layer 1 alarms for BRI PTMP lines. ... Several telcos bring the BRI PTMP layer 1 down when the line is idle. When layer 1 goes down, Asterisk cannot make outgoing calls. Incoming calls could fail as well because the alarm processing is handled by a different code path than the Q.931 messages. * Add the layer1_presence configuration option to ignore layer 1 alarms when the telco brings layer 1 down. This option can be configured by span while the similar DAHDI driver teignorered=1 option is system wide. This option unlike layer2_persistence does not require libpri v1.4.13 or newer. Related to JIRA AST-598 JIRA ABE-2845 ........ Merged revisions 362428 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 362429 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362430 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	a22b56235b	Add ability for chan_dahdi ISDN to block connected line updates per span. ... Added new chan_dahdi.conf colp_send option parameter to block connected line updates per span. (closes issue ASTERISK-17025) Reported by: Michael Smith git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358997 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Alec L Davis	a4f6d96b2e	push 'outgoing' flag from sig_XXX up to chan_dahdi ... 'p->outgoing' in chan_dahdi and sig_analog wern't kept in sync, particulary FXS ast_hangup didn't clear the 'outgoing' flag. sig_pri and sig_ss7 were keeping 'outgoing' flag insync. Now provides a callback for all the low level sig_XXX modules. (issue ASTERISK-19316) alecdavis (license 585) Reported by: Jeremy Pepper Tested by: alecdavis Review: https://reviewboard.asterisk.org/r/1747/ ........ Merged revisions 355850 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 355851 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355852 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	a4f5d2c2ef	Restore alternate SIG_PRI_DEBUG_DEFAULT meaning. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354174 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	49ed50d8ac	Allow more control over the output of pri debug ... This changes the debuglevel of 'pri set debug' to a bit mask allowing the user to independently select bits of output: 1 libpri internals including state machine 2 Decoded Q.931 messages 4 Decoded Q.921 headers 8 raw hex dump of the full frames Additionally, this ensures that the meaning of "on" does not change and intrudces intense and hex to simplify usage. (closes issue ASTERISK-17159) Original-patch-by: wimpy git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354165 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	63c5eaee43	Restore the 'w' modifier support for ISDN spans. Dial(DAHDI/g0/1234w888) ... This feature also causes the sending complete ie to be sent for switch types that do not automatically send the ie. (EuroISDN/ETSI) The main difference between dialing Dial(DAHDI/g0/1234w888) and Dial(DAHDI/g0/1234,,D(888)) is the sending of the sending complete ie. (closes issue ASTERISK-19176) Reported by: rmudgett Tested by: rmudgett ........ Merged revisions 353867 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 353868 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353872 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	23bc964e1c	Constify some more channel driver technology callback parameters. ... Review: https://reviewboard.asterisk.org/r/1707/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353685 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	265102faf8	Merged revisions 332265 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/10 ................ r332265 | rmudgett | 2011-08-17 11:01:29 -0500 (Wed, 17 Aug 2011) | 33 lines Merged revisions 332264 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r332264 | rmudgett | 2011-08-17 10:51:08 -0500 (Wed, 17 Aug 2011) | 26 lines Outgoing BRI calls fail when using Asterisk 1.8 with HA8, HB8, and B410P cards. France Telecom brings layer 2 and layer 1 down on BRI lines when the line is idle. When layer 1 goes down Asterisk cannot make outgoing calls and the HA8 and HB8 cards also get IRQ misses. The inability to make outgoing calls is because the line is in red alarm and Asterisk will not make calls over a line it considers unavailable. The IRQ misses for the HA8 and HB8 card are because the hardware is switching clock sources from the line which just brought layer 1 down to internal timing. There is a DAHDI option for the B410P card to not tell Asterisk that layer 1 went down so Asterisk will allow outgoing calls: "modprobe wcb4xxp teignored=1". There is a similar DAHDI option for the HA8 and HB8 cards: "modprobe wctdm24xxp bri_teignored=1". Unfortunately that will not clear up the IRQ misses when the telco brings layer 1 down. * Add layer 2 persistence option to customize the layer 2 behavior on BRI PTMP lines. The new option has three settings: 1) Use libpri default layer 2 setting. 2) Keep layer 2 up. Bring layer 2 back up when the peer brings it down. 3) Leave layer 2 down when the peer brings it down. Layer 2 will be brought up as needed for outgoing calls. JIRA AST-598 ........ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332270 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	5257a915a8	Option needed for Q931_IE_TIME_DATE to be optional in CONNECT message. ... The NEC SV8300 rejects the Q931_IE_TIME_DATE for Q.SIG. Add option to specify if and how much of the current time is put in Q931_IE_TIME_DATE. * Send date/time ie never. * Send date/time ie date only. * Send date/time ie date and hour. * Send date/time ie date, hour, and minute. * Send date/time ie date, hour, minute, and second. * Send date/time ie default: Libpri will send date and hhmm only when in NT PTMP mode to support ISDN phones. (closes issue #19221) Reported by: kenner JIRA SWP-3396 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319427 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	0f1ff9141e	Implement AMI action PRIShowSpans. ... PRIShowSpans works like the AMI action DAHDIShowChannels but for PRI spans. It is similar to the CLI command "pri show spans". (closes issue #15980) Reported by: dwery git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314735 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	37274c73ee	Problems with ISDN MWI to phones. ... The "controlling user number" is always the number of the voice mail box which is identical with the subscriber number itself. This number which is listed in the ISDN phone MWI menu cannot be called back to contact the voice mail box. The controlling user number should be made configurable. JIRA ABE-2738 JIRA SWP-2846 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314116 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	ce17f956dc	Add private lock deadlock avoidance callback to PRI and SS7. ... Factor out the equivalent function for analog. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@313100 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	698a356737	Merged revisions 312949 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r312949 | rmudgett | 2011-04-05 13:45:24 -0500 (Tue, 05 Apr 2011) | 6 lines Crash if ISDN span layer 1 is down on initial load. Regression from -r312575 B channel shifting during negotiation. * Also combine updating the alarm flag with clearing the resetting flag. ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312950 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	e1ceb52b51	Merged revisions 312575 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.8 ................ r312575 | rmudgett | 2011-04-04 11:10:50 -0500 (Mon, 04 Apr 2011) | 52 lines Merged revisions 312574 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.6.2 ................ r312574 | rmudgett | 2011-04-04 11:00:02 -0500 (Mon, 04 Apr 2011) | 45 lines Merged revisions 312573 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r312573 | rmudgett | 2011-04-04 10:49:30 -0500 (Mon, 04 Apr 2011) | 38 lines Issues with ISDN calls changing B channels during call negotiations. The handling of the PROCEEDING message was not using the correct call structure if the B channel was changed. (The same for PROGRESS.) The call was also not hungup if the new B channel is not provisioned or is busy. * Made all call connection messages (SETUP_ACKNOWLEDGE, PROCEEDING, PROGRESS, ALERTING, CONNECT, CONNECT_ACKNOWLEDGE) ensure that they are using the correct structure and B channel. If there is any problem with the operations then the call is now hungup with an appropriate cause code. * Made miscellaneous messages (INFORMATION, FACILITY, NOTIFY) find the correct structure by looking for the call and not using the channel ID. NOTIFY is an exception with versions of libpri before v1.4.11 because a call pointer is not available for Asterisk to use. * Made all hangup messages (DISCONNECT, RELEASE, RELEASE_COMPLETE) find the correct structure by looking for the call and not using the channel ID. (closes issue #18313) Reported by: destiny6628 Tested by: rmudgett JIRA SWP-2620 (closes issue #18231) Reported by: destiny6628 Tested by: rmudgett JIRA SWP-2924 (closes issue #18488) Reported by: jpokorny JIRA SWP-2929 JIRA AST-437 (The issues fixed here are most likely causing this JIRA issue.) JIRA DAHDI-406 JIRA LIBPRI-33 (Stuck resetting flag likely fixed) ........ ................ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312579 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	928ec2b990	Merged revisions 309445 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r309445 | rmudgett | 2011-03-04 09:22:04 -0600 (Fri, 04 Mar 2011) | 46 lines Get real channel of a DAHDI call. Starting with Asterisk v1.8, the DAHDI channel name format was changed for ISDN calls to: DAHDI/i<span>/<number>[:<subaddress>]-<sequence-number> There were several reasons that the channel name had to change. 1) Call completion requires a device state for ISDN phones. The generic device state uses the channel name. 2) Calls do not necessarily have B channels. Calls placed on hold by an ISDN phone do not have B channels. 3) The B channel a call initially requests may not be the B channel the call ultimately uses. Changes to the internal implementation of the Asterisk master channel list caused deadlock problems for chan_dahdi if it needed to change the channel name. Chan_dahdi no longer changes the channel name. 4) DTMF attended transfers now work with ISDN phones because the channel name is "dialable" like the chan_sip channel names. For various reasons, some people need to know which B channel a DAHDI call is using. * Added CHANNEL(dahdi_span), CHANNEL(dahdi_channel), and CHANNEL(dahdi_type) so the dialplan can determine the B channel currently in use by the channel. Use CHANNEL(no_media_path) to determine if the channel even has a B channel. * Added AMI event DAHDIChannel to associate a DAHDI channel with an Asterisk channel so AMI applications can passively determine the B channel currently in use. Calls with "no-media" as the DAHDIChannel do not have an associated B channel. No-media calls are either on hold or call-waiting. (closes issue #17683) Reported by: mrwho Tested by: rmudgett (closes issue #18603) Reported by: arjankroon Patches: issue17683_18603_v1.8_v2.patch uploaded by rmudgett (license 664) Tested by: stever28, rmudgett ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@309446 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	4a48600231	Add CLI "pri show channels" command. ... List the current mapping of DAHDI B channels to Asterisk channel names and which calls are on hold or call-waiting. Calls on hold or call-waiting are not associated with any B channel. JIRA LIBPRI-27 JIRA SWP-2547 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307964 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	b2ef13cb60	Merged revisions 307879 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r307879 | rmudgett | 2011-02-15 10:13:55 -0600 (Tue, 15 Feb 2011) | 37 lines No response sent for SIP CC subscribe/resubscribe request. Asterisk does not send a response if we try to subscribe for call completion after we have received a 180 Ringing. You can only subscribe for call completion when the call has been cleared. When we receive the 180 Ringing, for this call, its call-completion state is 'CC_AVAILABLE'. If we then send a subscribe message to Asterisk, it trys to change the call-completion state to 'CC_CALLER_REQUESTED'. Because this is an invalid state change, it just ignores the message. The only state Asterisk will accept our subscribe message is in the 'CC_CALLER_OFFERED' state. Asterisk will go into the 'CC_CALLER_OFFERED' when the SIP client clears the call by sending a CANCEL. Asterisk should always send a response. Even if its a negative one. The fix is to allow for the CCSS core to notify a CC agent that a failure has occurred when CC is requested. The "ack" callback is replaced with a "respond" callback. The "respond" callback has a parameter indicating either a successful response or a specific type of failure that may need to be communicated to the requester. (closes issue #18336) Reported by: GeorgeKonopacki Tested by: mmichelson, rmudgett JIRA SWP-2633 (closes issue #18337) Reported by: GeorgeKonopacki Tested by: mmichelson JIRA SWP-2634 ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307883 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	209a39f4b0	Use correct conditional for MCID send. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306791 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	49feb747ba	Pass a MCID request to the bridged channel. ... Pass a MCID request to the bridged channel so the bridged channel can send it to the network. The ability to send the MCID request on an ISDN span is enabled with the new chan_dahdi.conf mcid_send option. JIRA SWP-2845 JIRA ABE-2736 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306755 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	a8aeb04a9f	Add ISDN display ie text handling options to chan_dahdi.conf. ... The display ie handling can be controlled independently in the send and receive directions with the following options: * Block display text data. * Use display text in SETUP/CONNECT messages for name. * Use display text for COLP name updates (FACILITY/NOTIFY as appropriate). * Pass arbitrary display text during a call. Sent in INFORMATION messages. Received from any message that the display text was not used as a name. If the display options are not set then the options default to legacy behavior. The arbitrary display text is exchanged between bridged channels using the AST_FRAME_TEXT frame type. To send display text from the dialplan use the SendText() application when the arbitrary display text option is enabled. JIRA SWP-2688 JIRA ABE-2693 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306396 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	ecdbb3d1d9	Merged from revision 304341 ... https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier .......... r304341 | rmudgett | 2011-01-26 16:38:39 -0600 (Wed, 26 Jan 2011) | 7 lines Add connected line chan_dahdi.conf pricpndialplan option. * Added from_channel value to prilocaldialplan option. JIRA ABE-2731 JIRA SWP-2842 .......... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304385 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	7889af7cab	Merged revisions 303771 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.8 ................ r303771 | rmudgett | 2011-01-25 11:49:20 -0600 (Tue, 25 Jan 2011) | 54 lines Merged revisions 303769 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.6.2 ................ r303769 | rmudgett | 2011-01-25 11:42:42 -0600 (Tue, 25 Jan 2011) | 47 lines Merged revisions 303765 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r303765 | rmudgett | 2011-01-25 11:36:50 -0600 (Tue, 25 Jan 2011) | 40 lines Sending out unnecessary PROCEEDING messages breaks overlap dialing. Issue #16789 was a good idea. Unfortunately, it breaks overlap dialing through Asterisk. There is not enough information available at this point to know if dialing is complete. The ast_exists_extension(), ast_matchmore_extension(), and ast_canmatch_extension() calls are not adequate to detect a dial through extension pattern of "_9!". Workaround is to use the dialplan Proceeding() application early in non-dial through extensions. * Effectively revert issue #16789. * Allow outgoing overlap dialing to hear dialtone and other early media. A PROGRESS "inband-information is now available" message is now sent after the SETUP_ACKNOWLEDGE message for non-digital calls. An AST_CONTROL_PROGRESS is now generated for incoming SETUP_ACKNOWLEDGE messages for non-digital calls. * Handling of the AST_CONTROL_CONGESTION in chan_dahdi/sig_pri was inconsistent with the cause codes. * Added better protection from sending out of sequence messages by combining several flags into a single enum value representing call progress level. * Added diagnostic messages for deferred overlap digits handling corner cases. (closes issue #17085) Reported by: shawkris (closes issue #18509) Reported by: wimpy Patches: issue18509_early_media_v1.8_v3.patch uploaded by rmudgett (license 664) Expanded upon issue18509_early_media_v1.8_v3.patch to include analog and SS7 because of backporting requirements. Tested by: wimpy, rmudgett ........ ................ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303772 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	90177fe708	Optional HOLD/RETRIEVE signaling for PTMP TE when the bridge goes on and off hold. ... Added the moh_signaling option to specify what to do when the channel's bridged peer puts the ISDN channel on and off of hold. Implemented as a FSM to control libpri ISDN signaling when the bridged peer places the channel on and off of hold with the AST_CONTROL_HOLD and AST_CONTROL_UNHOLD control frames. JIRA SWP-2687 JIRA ABE-2691 Review: https://reviewboard.asterisk.org/r/1063/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@300212 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Tzafrir Cohen	6307b6fe3a	Typos: recieved => received ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299005 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	ccdc417ab5	Merged revisions 296167 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.8 ................ r296167 | rmudgett | 2010-11-24 16:49:48 -0600 (Wed, 24 Nov 2010) | 57 lines Merged revisions 296166 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.6.2 ................ r296166 | rmudgett | 2010-11-24 16:42:45 -0600 (Wed, 24 Nov 2010) | 50 lines Merged revisions 296165 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r296165 | rmudgett | 2010-11-24 16:41:07 -0600 (Wed, 24 Nov 2010) | 43 lines Oneway audio to SIP phone from FXS port after FXS port gets a CallWaiting pip. The FXS connected phone has to have CW/CID support to fail, as it will send back a DTMF 'A' or 'D' when it's ready to receive CallerID. A normal phone with no CID never fails. Also the SIP phone does not hear MOH when the CW call is answered. The DTMF end frame is suppressed when the phone acknowledges the CW signal for CID. The problem is the DTMF begin frame needs to be suppressed as well. The DTMF begin frame is causing SIP to start sending the DTMF RTP frames. Since the DTMF end frame is suppressed, SIP will not stop sending those DTMF RTP packets. * Suppress the DTMF begin and end frames when the channel driver is looking for DTMF digits. * Fixed a couple issues caused by not cleaning up the CID spill if you answer the CW call while it is sending the CID spill. * Fixed not sending CW/CID spill to the phone when the call is natively bridged. (Fixed by not using native bridge if CW/CID is possible.) * Suppress received audio when sending CW/CID spills. The other parties involved do not need to hear the CW/CID spills and may be confused if the CW call is for them. (closes issue #18129) Reported by: alecdavis Patches: issue_18129_v1.8_v3.patch uploaded by rmudgett (license 664) Tested by: alecdavis, rmudgett NOTE: * v1.4 does not have the main problem fixed by suppressing the DTMF start frames. The other three items fixed are relevant. * If you really must restore native bridging between analog ports, you need to disable CW/CID either by configuring chan_dahdi.conf callwaitingcallerid=no or dialing *70 before dialing the number to temporarily disable CW. ........ ................ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296168 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	5d1cd7863a	Merged revisions 294823 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.8 ................ r294823 | rmudgett | 2010-11-11 20:45:22 -0600 (Thu, 11 Nov 2010) | 25 lines Merged revisions 294822 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.6.2 ................ r294822 | rmudgett | 2010-11-11 20:44:12 -0600 (Thu, 11 Nov 2010) | 18 lines Merged revisions 294821 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.4 ........ r294821 | rmudgett | 2010-11-11 20:41:13 -0600 (Thu, 11 Nov 2010) | 11 lines Asterisk is getting a "No D-channels available!" warning message every 4 seconds. Asterisk is just whining too much with this message: "No D-channels available! Using Primary channel XXX as D-channel anyway!". Filtered the message so it only comes out once if there is no D channel available without an intervening D channel available period. (closes issue #17270) Reported by: jmls ........ ................ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294824 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	3403dbf374	Merged revisions 284779-284780 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r284779 | rmudgett | 2010-09-02 15:59:12 -0500 (Thu, 02 Sep 2010) | 8 lines Made output libpri event names if pri debugging is enabled when sig_pri processes them. * Simplified CLI "pri debug xx span xx" command code and removed redundant debugging enabled messages. * Made CLI "pri debug xx span xx" command only close the debugging log file if it was opened. ........ r284780 | rmudgett | 2010-09-02 16:02:54 -0500 (Thu, 02 Sep 2010) | 2 lines Simplified pri_dchannel() poll timeout duration code. ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@284782 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	6a8c623ed2	Merged revisions 282671-282672 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r282671 | rmudgett | 2010-08-18 10:27:51 -0500 (Wed, 18 Aug 2010) | 1 line Use the correct operator when calculating the PRI span devstate. ........ r282672 | rmudgett | 2010-08-18 10:28:27 -0500 (Wed, 18 Aug 2010) | 1 line Use the correct type for aoce_delayhangup bit field. ........ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282673 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	301505c4c4	Rename sig_pri_pri to sig_pri_span. More descriptive of concept. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278942 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	93a5e74e37	Add digit manipulation tag support to chan_dahdi/sig_pri like chan_misdn. ... Add the append_msn_to_cid_tag option to chan_dahdi like chan_misdn. Review: https://reviewboard.asterisk.org/r/696/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@270219 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Leif Madsen	c672763af8	Fix some doxygen warnings. ... (closes issue #17336) Reported by: snuffy Patches: doxygen-fixes1.diff uploaded by snuffy (license 35) Tested by: russell git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268969 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	0122ccd29c	Extract sig_ss7 out of chan_dahdi. ... Extract the SS7 specific code out of chan_dahdi like what was done to ISDN/PRI and analog signaling. The new SS7 structures were modeled on sig_pri. The changes to sig_pri are an enhancement and a bug fix made possible because SS7 was extracted. 1) The sig_pri TRANSFERCAPABILITY channel variable should have been set unconditionally in sig_pri_new_ast_channel(). 2) SS7/PRI transfer capability interaction in dahdi_new() fixed because of SS7 extraction. 3) Module ref count error in dahdi_new() if startpbx failed to start the PBX for some reason. Review: https://reviewboard.asterisk.org/r/661/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268774 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	1c67f208a7	Add ETSI Message Waiting Indication (MWI) support. ... Add the ability to report waiting messages to ISDN endpoints (phones). Relevant specification: EN 300 650 and EN 300 745 Review: https://reviewboard.asterisk.org/r/599/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267399 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	afcbc93dae	Add ETSI Call Waiting support. ... Add the ability to announce a call to an endpoint when there are no B channels available. A call waiting call is a SETUP message with no B channel selected. Relevant specification: EN 300 056, EN 300 057, EN 300 058 For DAHDI/ISDN channels, the CHANNEL() dialplan function now supports the "no_media_path" option. * Returns "0" if there is a B channel associated with the call. * Returns "1" if no B channel is associated with the call. The call is either on hold or is a call waiting call. If you are going to allow incoming call waiting calls then you need to use CHANNEL(no_media_path) do determine if you must drop a call to accept the new call. Review: https://reviewboard.asterisk.org/r/568/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267261 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	afd4454c44	Generic Advice of Charge. ... Asterisk Generic AOC Representation - Generic AOC encode/decode routines. (Generic AOC must be encoded to be passed on the wire in the AST_CONTROL_AOC frame) - AST_CONTROL_AOC frame type to represent generic encoded AOC data - Manager events for AOC-S, AOC-D, and AOC-E messages Asterisk App Support - app_dial AOC-S pass-through support on call setup - app_queue AOC-S pass-through support on call setup AOC Unit Tests - AOC Unit Tests for encode/decode routines - AOC Unit Test for manager event representation. SIP AOC Support - Pass-through of generic AOC-D and AOC-E messages to snom phones via the snom AOC specification. - Creation of chan_sip page3 flags for the addition of the new 'snom_aoc_enabled' sip.conf option. IAX AOC Support - Natively supports AOC pass-through through the use of the new AST_CONTROL_AOC frame type DAHDI AOC Support - ETSI PRI full AOC Pass-through support - 'aoc_enable' chan_dahdi.conf option for independently enabling pass-through of AOC-S, AOC-D, AOC-E. - 'aoce_delayhangup' option for retrieving AOC-E on disconnect. - DAHDI A() dial string option for requesting AOC services. example usage: ;requests AOC-S, AOC-D, and AOC-E on call setup exten=>1111,1,Dial(DAHDI/g1/1112/A(s,d,e)) Review: https://reviewboard.asterisk.org/r/552/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267096 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	48dd4d1249	Add ETSI Explicit Call Transfer (ECT) support. ... Added ability to send and receive ETSI Explicit Call Transfer (ECT) messages to eliminate tromboned calls. Note: Asterisk already supported initiating the transfer of calls to eliminate tromboned calls to libpri so there was nothing to do for the asterisk portion. Review: https://reviewboard.asterisk.org/r/520/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266926 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	159f0d4b24	The inalarm flag is not passed up from the sig_analog and sig_pri submodules. ... The CLI "dahdi show channel" command was not correctly reporting the InAlarm status. The inalarm flag is now consistently passed between chan_dahdi and submodules. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@261007 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	00a1a96ff5	Separate the uses of NUM_DCHANS and MAX_CHANNELS into PRI, SS7, and MFCR2 users. ... Created SIG_PRI_MAX_CHANNELS, SIG_PRI_NUM_DCHANS SIG_SS7_MAX_CHANNELS, SIG_SS7_NUM_DCHANS SIG_MFCR2_MAX_CHANNELS Also fixed the declaration of pollers[] in mfcr2_monitor(). It was dimensioned to the number of bytes in struct dahdi_mfcr2.pvts[] and not to the same dimension of the struct dahdi_mfcr2.pvts[]. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@260435 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	537edff10f	Remove PRI CCSS BUGBUG message and update configure script. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256569 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Mark Michelson	e24661fd18	Merge Call completion support into trunk. ... From Reviewboard: CCSS stands for Call Completion Supplementary Services. An admittedly out-of-date overview of the architecture can be found in the file doc/CCSS_architecture.pdf in the CCSS branch. Off the top of my head, the big differences between what is implemented and what is in the document are as follows: 1. We did not end up modifying the Hangup application at all. 2. The document states that a single call completion monitor may be used across multiple calls to the same device. This proved to not be such a good idea when implementing protocol-specific monitors, and so we ended up using one monitor per-device per-call. 3. There are some configuration options which were conceived after the document was written. These are documented in the ccss.conf.sample that is on this review request. For some basic understanding of terminology used throughout this code, see the ccss.tex document that is on this review. This implements CCBS and CCNR in several flavors. First up is a "generic" implementation, which can work over any channel technology provided that the channel technology can accurately report device state. Call completion is requested using the dialplan application CallCompletionRequest and can be canceled using CallCompletionCancel. Device state subscriptions are used in order to monitor the state of called parties. Next, there is a SIP-specific implementation of call completion. This method uses the methods outlined in draft-ietf-bliss-call-completion-06 to implement call completion using SIP signaling. There are a few things to note here: * The agent/monitor terminology used throughout Asterisk sometimes is the reverse of what is defined in the referenced draft. * Implementation of the draft required support for SIP PUBLISH. I attempted to write this in a generic-enough fashion such that if someone were to want to write PUBLISH support for other event packages, such as dialog-state or presence, most of the effort would be in writing callbacks specific to the event package. * A subportion of supporting PUBLISH reception was that we had to implement a PIDF parser. The PIDF support added is a bit minimal. I first wrote a validation routine to ensure that the PIDF document is formatted properly. The rest of the PIDF reading is done in-line in the call-completion-specific PUBLISH-handling code. In other words, while there is PIDF support here, it is not in any state where it could easily be applied to other event packages as is. Finally, there are a variety of ISDN-related call completion protocols supported. These were written by Richard Mudgett, and as such I can't really say much about their implementation. There are notes in the CHANGES file that indicate the ISDN protocols over which call completion is supported. Review: https://reviewboard.asterisk.org/r/523 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256528 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	7f68a32417	Minor tweaks and comment updates to chan_dahdi. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251821 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	b1ccb1a44e	Simplified dahdi_request() channel selection failed reason/cause code. ... Also avoid potential crash because cause could be NULL. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251585 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	ee5e65194f	Reduce the amount of database access for HAVE_PRI_SERVICE_MESSAGES. ... Rework HAVE_PRI_SERVICE_MESSAGES to not use the active values directly from the database. Database access is likely expensive. Database access now only happens on initialization, destruction, and when the B channel is taken in or out of service. This change is not related to call waiting but it would cause the search for a call waiting interface to be very expensive and slow down D channel message servicing. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251538 65c4cc65-6c06-0410-ace0-fbb531ad65f3	15 years ago
Richard Mudgett	c5cfc2a867	Removed unused parameters from analog_available() and sig_pri_available(). ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@237804 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Jeff Peeler	ac9a4cecf3	Fix problem on digital channels due to digital flag not getting set ... Changed areas in sig_pri to set the digital flag using a callback that will also set the corresponding flag in chan_dahdi. Modified dahdi_request slightly so that if a bearer is marked as digital, that information is available when creating the new channel. (closes issue #16151) Reported by: alecdavis Patch based on bug_16151.diff.txt uploaded by alecdavis (license 585) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231058 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Richard Mudgett	6406f39594	DAHDI ISDN channel names will not allow device state to work. (Interim solution.) ... Since ISDN works like SIP and not analog ports in regard to devices, the device state based on the ISDN channel number could not work. This has not been an issue until the advent of PTMP NT mode. Previously, ISDN lines were used as trunks and did not have to keep track of specific devices. As an interim solution until device states are properly implemented, the channel name is being changed to the following format to use the generic device state support: DAHDI/i<span>/<number>[:<subaddress>]-<sequence-number> Dialplan hints would thus be: exten => xxx,hint,DAHDI/i2/5551212 This will work with the following restrictions: * The number of devices/phones cannot exceed the number of B channels. (i.e., BRI has 2) * Each device/phone can only have one number. No shared MSN's. * The phones/devices probably should not use subaddressing. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@226882 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago
Richard Mudgett	cff6d02b53	Add to chan_dahdi ISDN HOLD, Call deflection, and keypad facility support. ... * Added handling of received HOLD/RETRIEVE messages and the optional ability to transfer a held call on disconnect similar to an analog phone. * Added CallRerouting/CallDeflection support for Q.SIG, ETSI PTP, ETSI PTMP. Will reroute/deflect an outgoing call when receive the message. Can use the DAHDISendCallreroutingFacility to send the message for the supported switches. * Added ability to send/receive keypad digits in the SETUP message. Send keypad digits in SETUP message: Dial(DAHDI/g1[/K<keypad_digits>][/extension]) Access any received keypad digits in SETUP message by: ${CHANNEL(keypad_digits)} * Added support for BRI PTMP NT mode. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225692 65c4cc65-6c06-0410-ace0-fbb531ad65f3	16 years ago