https://origsvn.digium.com/svn/asterisk/branches/10
................
r329528 | jrose | 2011-07-26 08:52:34 -0500 (Tue, 26 Jul 2011) | 24 lines
Merged revisions 329527 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r329527 | jrose | 2011-07-26 08:25:35 -0500 (Tue, 26 Jul 2011) | 17 lines
Fixes some voicemail forwarding behavior based around prepend mode.
Formerly, prepend forwarding would have the user record a message with no useful prompt
and an expectation for the user to push a button on the phone when finished recording.
If a length of silence was detected instead, the recording would be canceled and the user
would re-enter the voicemail forwarding menu. Subsequent time-outs in prepend recording
would also bug out in the sense that they would write over the original message and get
sent to the recipient regardless of whether they timed out or were accepted. This patch
fixes this issue and adds a prompt which will be played after a timeout informing the
user that they needed to press a button. Currently, the sound files that we have are
somewhat inadquate for this, so after the call we simply have Allison say "Please try
again. Then press pound." which actually relies on two separate sound files. Just one
would be more appropriate.
reporter: Vlad Povorozniuc
Review: https://reviewboard.asterisk.org/r/1327/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@329530 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r302634 | tilghman | 2011-01-19 14:24:57 -0600 (Wed, 19 Jan 2011) | 22 lines
Merged revisions 302599 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r302599 | tilghman | 2011-01-19 14:13:24 -0600 (Wed, 19 Jan 2011) | 15 lines
Kill zombies.
When we ast_safe_fork() with a non-zero argument, we're expected to reap our
own zombies. On a zero argument, however, the zombies are only reaped when
there aren't any non-zero forked children alive. At other times, we
accumulate zombies. This code is forward ported from res_agi in 1.4, so that
forked children are always reaped, thus preventing an accumulation of zombie
processes.
(closes issue #18515)
Reported by: ernied
Patches:
20101221__issue18515.diff.txt uploaded by tilghman (license 14)
Tested by: ernied
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302644 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The purpose of this patch is to eliminate struct ast_callerid since it has
turned into a miscellaneous collection of various party information.
Eliminate struct ast_callerid and replace it with the following struct
organization:
struct ast_party_name {
char *str;
int char_set;
int presentation;
unsigned char valid;
};
struct ast_party_number {
char *str;
int plan;
int presentation;
unsigned char valid;
};
struct ast_party_subaddress {
char *str;
int type;
unsigned char odd_even_indicator;
unsigned char valid;
};
struct ast_party_id {
struct ast_party_name name;
struct ast_party_number number;
struct ast_party_subaddress subaddress;
char *tag;
};
struct ast_party_dialed {
struct {
char *str;
int plan;
} number;
struct ast_party_subaddress subaddress;
int transit_network_select;
};
struct ast_party_caller {
struct ast_party_id id;
char *ani;
int ani2;
};
The new organization adds some new information as well.
* The party name and number now have their own presentation value that can
be manipulated independently. ISDN supplies the presentation value for
the name and number at different times with the possibility that they
could be different.
* The party name and number now have a valid flag. Before this change the
name or number string could be empty if the presentation were restricted.
Most channel drivers assume that the name or number is then simply not
available instead of indicating that the name or number was restricted.
* The party name now has a character set value. SIP and Q.SIG have the
ability to indicate what character set a name string is using so it could
be presented properly.
* The dialed party now has a numbering plan value that could be useful to
have available.
The various channel drivers will need to be updated to support the new
core features as needed. They have simply been converted to supply
current functionality at this time.
The following items of note were either corrected or enhanced:
* The CONNECTEDLINE() and REDIRECTING() dialplan functions were
consolidated into func_callerid.c to share party id handling code.
* CALLERPRES() is now deprecated because the name and number have their
own presentation values.
* Fixed app_alarmreceiver.c write_metadata(). The workstring[] could
contain garbage. It also can only contain the caller id number so using
ast_callerid_parse() on it is silly. There was also a typo in the
CALLERNAME if test.
* Fixed app_rpt.c using ast_callerid_parse() on the channel's caller id
number string. ast_callerid_parse() alters the given buffer which in this
case is the channel's caller id number string. Then using
ast_shrink_phone_number() could alter it even more.
* Fixed caller ID name and number memory leak in chan_usbradio.c.
* Fixed uninitialized char arrays cid_num[] and cid_name[] in
sig_analog.c.
* Protected access to a caller channel with lock in chan_sip.c.
* Clarified intent of code in app_meetme.c sla_ring_station() and
dial_trunk(). Also made save all caller ID data instead of just the name
and number strings.
* Simplified cdr.c set_one_cid(). It hand coded the ast_callerid_merge()
function.
* Corrected some weirdness with app_privacy.c's use of caller
presentation.
Review: https://reviewboard.asterisk.org/r/702/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a generic API for accommodating IPv6 and IPv4 addresses
within Asterisk. While many files have been updated to make use of the
API, chan_sip and the RTP code are the files which actually support
IPv6 addresses at the time of this commit. The way has been paved for
easier upgrading for other files in the near future, though.
Big thanks go to Simon Perrault, Marc Blanchet, and Jean-Philippe Dionne
for their hard work on this.
(closes issue #17565)
Reported by: russell
Patches:
asteriskv6-test-report.pdf uploaded by russell (license 2)
Review: https://reviewboard.asterisk.org/r/743
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch breaks up every part of the sip registry string during
config parsing and removes all parsing from transmit_register().
Thanks to Nick_Lewis for contributing this patch!
(closes issue #14331)
Reported by: Nick_Lewis
Patches:
chan_sip.c-domparse.patch uploaded by Nick Lewis (license 657)
chan_sip.c.patch uploaded by Nick Lewis (license 657)
chan_sip.c.domainparse3.patch uploaded by Nick Lewis (license 657)
chan_sip.c-domparse4.patch uploaded by Nick Lewis (license 657)
chan_sip.c-domparse5.patch uploaded by Nick Lewis (license 657)
nicklewispatch.diff uploaded by dvossel (license 671)
Tested by: Nick_Lewis, dvossel
Review: https://reviewboard.asterisk.org/r/628/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266090 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On Linux (glibc), regcomp() does not return an error for an empty string.
However, the version on OSX will return an error. The test for channel group
matching by regex now passes on the mac, as well.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@252241 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Current support for regex matching was previously only available on the group.
Also, error reporting for regex failures has been added. In addition to this
feature enhancement a unit test has been written to check the regular expression
logic to ensure the count operation is working as expected.
(closes issue #16642)
Reported by: kobaz
Patches:
groupmatch2.patch uploaded by kobaz (license 834)
Review: https://reviewboard.asterisk.org/r/503/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247295 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As described in the CHANGES file:
* MeetMe has a new option 'G' to play an announcement before joining a
conference.
* Page has a new option 'A(x)' which will playback an announcement
simultaneously to all paged phones (and optionally excluding the caller's one
using the new option 'n') before the call is bridged.
To add the new option to meetme, the conference flag options had to be extended
to 64 bits.
(closes issue #14365)
Reported by: dferrer
Patches:
page_announce.patch uploaded by dferrer (license 525)
modified by me
Review: https://reviewboard.asterisk.org/r/188/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@234173 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Two examples of its use are included, and the usage could be expanded in some
cases into certain configuration options where time periods are specified.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@224225 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When connected line updates are received or generated in the middle
of an application call, it is now possible to execute a macro to
manipulate the connected line data. This way, phone numbers may be
manipulated to be more presentable to users, names may be changed
for...whatever reason, or whatever else needs to be done may be.
Review: https://reviewboard.asterisk.org/r/256
AST-165
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198727 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds 'const' tags to a number of Asterisk APIs where they are appropriate (where the API already demanded that the function argument not be modified, but the compiler was not informed of that fact). The list includes:
- CLI command handlers
- CLI command handler arguments
- AGI command handlers
- AGI command handler arguments
- Dialplan application handler arguments
- Speech engine API function arguments
In addition, various file-scope and function-scope constant arrays got 'const' and/or 'static' qualifiers where they were missing.
Review: https://reviewboard.asterisk.org/r/251/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There seems to be a bug with old versions of g++ that doesn't allow a structure
member to use the name list. Rename list member to group_list in ast_group_info
and change the few places it is used.
(closes issue #14790)
Reported by: stuarth
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@190057 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In app.c, ast_app_getdata is called to stream the prompts and receive DTMF input. If ast_app_getdata() receives an empty string caused by the user inputing the end of string character, in this case '#', it should break from the prompt loop and return to app_read, but instead it cycles through all the prompts. I've added a return value for this special case in ast_readstring() which uses an enum I've delcared in apps.h. This enum is now used as a return value for ast_app_getdata().
(closes issue #14279)
Reported by: Marquis
Patches:
fix_app_read.patch uploaded by Marquis (license 32)
read-ampersanmd.patch2 uploaded by dvossel (license 671)
Tested by: Marquis, dvossel
Review: http://reviewboard.digium.com/r/177/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180032 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r179468 | tilghman | 2009-03-02 17:09:01 -0600 (Mon, 02 Mar 2009) | 10 lines
When ending a recording with silence detection, remember to reduce the duration.
The end of the recording is correspondingly trimmed, but the duration was not
trimmed by the number of seconds trimmed, so the saved duration was necessarily
longer than the actual soundfile duration.
(closes issue #14406)
Reported by: sasargen
Patches:
20090226__bug14406.diff.txt uploaded by tilghman (license 14)
Tested by: sasargen
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@179469 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch includes a number of changes to the indications API. The primary
motivation for this work was to improve stability. The object management
in this API was significantly flawed, and a number of trivial situations could
cause crashes.
The changes included are:
1) Remove the module res_indications. This included the critical functionality
that actually loaded the indications configuration. I have seen many people
have Asterisk problems because they accidentally did not have an
indications.conf present and loaded. Now, this code is in the core,
and Asterisk will fail to start without indications configuration.
There was one part of res_indications, the dialplan applications, which did
belong in a module, and have been moved to a new module, app_playtones.
2) Object management has been significantly changed. Tone zones are now
managed using astobj2, and it is no longer possible to crash Asterisk by
issuing a reload that destroys tone zones while they are in use.
3) The API documentation has been filled out.
4) The API has been updated to follow our naming conventions.
5) Various bits of code throughout the tree have been updated to account
for the API update.
6) Configuration parsing has been mostly re-written.
7) "Code cleanup"
The code is from svn/asterisk/team/russell/indications/.
Review: http://reviewboard.digium.com/r/149/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r172438 | tilghman | 2009-01-29 16:54:29 -0600 (Thu, 29 Jan 2009) | 9 lines
Lose the CAP_NET_ADMIN at every fork, instead of at startup. Otherwise, if
Asterisk runs as a non-root user and the administrator does a 'restart now',
Asterisk loses the ability to set QOS on packets.
(closes issue #14004)
Reported by: nemo
Patches:
20090105__bug14004.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172441 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Also, change a function in app.c to return a userful value instead of always returning 0.
Patch by fnordian, changed by Corydon76 and myself.
This does not close the bug report, as fnordian had an additional change we're still discussing.
(related to issue #14059)
Reported by: fnordian
Patches:
chan_sip_hfield.patch uploaded by fnordian (license 110)
20090116__bug14059.diff.txt uploaded by Corydon76 (license 14)
Tested by: fnordian, Corydon76, oej
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r161948 | russell | 2008-12-09 08:52:25 -0600 (Tue, 09 Dec 2008) | 15 lines
Fix a problem with GROUP() settings on a masquerade.
The previous code carried over group settings from the old channel to the new
one. However, it did nothing with the group settings that were already on the
new channel. This patch removes all group settings that already existed on the
new channel.
I have a more complicated version of this patch which addresses only the most
blatant problem with this, which is that a channel can end up with multiple
group settings in the same category. However, I could not think of a use case
for keeping any of the group settings from the old channel, so I went this route
for now.
(closes AST-152)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@161951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- make data member of the ast_frame struct a named union instead of a void
Recently the ast_queue_hangup function got a new parameter, the hangupcause
Feedback came in that this is no good and that instead a new function should be created.
This I did.
The hangupcause was stored in the seqno member of the ast_frame struct. This is not very
elegant, and since there's already a data member that one should be used.
Problem is, this member was a void *.
Now it's a named union so it can hold a pointer, an uint32 and there's a padding in case someone
wants to store another type in there in the future.
This commit is so massive, because all ast_frame.data uses have to be
altered to ast_frame.data.data
Thanks russellb and kpfleming for the feedback.
(closes issue #12674)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
marked "urgent" are considered to be higher priority than other messages
and so they will be played before any other messages in a user's mailbox.
There are two ways to leave an urgent message.
1. send the 'U' option to VoiceMail().
2. Set review=yes in voicemail.conf. This will give instructions for
a caller to mark a message as urgent after the message has been recorded.
I have tested that this works correctly with file and ODBC storage, and James
Rothenberger (who wrote initial support for this feature) has tested its use
with IMAP storage.
(closes issue #11817)
Reported by: jaroth
Based on branch http://svn.digium.com/svn/asterisk/team/jrothenberger/asterisk-urgent
Tested by: putnopvut, jaroth
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115588 65c4cc65-6c06-0410-ace0-fbb531ad65f3
party to be spoken instead of the channel name or number.
This was accomplished by adding a new function pointer to point to a function in app_voicemail
which retrieves the name file and plays it. This makes for an easy way that applications may play
a user's name should it be necessary. app_directory, in particular, can be simplified greatly by
this change.
This change comes as a suggestion from Switchvox, which already has this feature. AST-23
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114813 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r110628 | file | 2008-03-25 11:37:35 -0300 (Tue, 25 Mar 2008) | 4 lines
Add an option (transmit_silence) which transmits silence during both Record() and DTMF generation. The reason this is an option is that in order to transmit silence we have to setup a translation path. This may not be needed/wanted in all cases.
(closes issue #10058)
Reported by: tracinet
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110629 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r103786 | mmichelson | 2008-02-18 14:52:09 -0600 (Mon, 18 Feb 2008) | 10 lines
There was an invalid assumption when calculating the duration of a file that the filestream in question
was created properly. Unfortunately this led to a segfault in the situation where an unknown format was
specified in voicemail.conf and a voicemail was recorded. Now, we first check to be sure that the stream
was written correctly or else assume a zero duration.
(closes issue #12021)
Reported by: jakep
Tested by: putnopvut
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103787 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89709 | kpfleming | 2007-11-27 14:16:56 -0600 (Tue, 27 Nov 2007) | 2 lines
on second thought... revert all the other changes i've made in app options parsing leaving only one: if an empty argument is supplied for an option, set that argument pointer to point to an empty string rather than NULL, so that the application can do normal checks on it without worrying about it being NULL
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89721 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89540 | tilghman | 2007-11-24 00:19:23 -0600 (Sat, 24 Nov 2007) | 9 lines
Currently, zero-length voicemail messages cause a hangup in VoicemailMain.
This change fixes the problem, with a multi-faceted approach. First, we
do our best to avoid these messages from being created in the first place,
and second, if that fails, we detect when the voicemail message is
zero-length and avoid exiting at that point.
Reported by: dtyoo
Patch by: gkloepfer,tilghman
(Closes issue #11083)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89541 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- the *_CURRENT macros no longer need the list head pointer argument
- add AST_LIST_MOVE_CURRENT to encapsulate the remove/add operation when moving entries between lists
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: nic_bellamy
Patches:
2006-10-03_svn_44249_voicemail_lockmode_v3.patch uploaded by nic_bellamy (license 213)
Add support for configurable file locking methods. The default is "lockfile",
which is the old behavior. There is an additional option, "flock", which is
intended for use in situations where the lockfile method will not work, such as
with SMB/CIFS mounts.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81233 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the beginning of the file. Also, add a channel variable that indicates
the location in the file where the Playback was stopped.
(closes issue #7655, patch from sharkey)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@68502 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r59887 | russell | 2007-04-03 13:01:49 -0500 (Tue, 03 Apr 2007) | 13 lines
Merged revisions 59886 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r59886 | russell | 2007-04-03 12:58:19 -0500 (Tue, 03 Apr 2007) | 5 lines
When doing a built-in blind or attended transfer, restore the ability to use '#'
to terminate the number and immediately do the transfer instead of having to
dial the number and just wait for the feature digit timeout.
(issue #8366, xueliangliang)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@59888 65c4cc65-6c06-0410-ace0-fbb531ad65f3
defined in indications.h to ind_tone_zone_sound and ind_tone_zone,
to avoid conflicts with the structs with the same names
defined in tonezone.h
Hope i haven't missed any instance.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48958 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- restructured build tree and makefiles to eliminate recursion problems
- support for embedded modules
- support for static builds
- simpler cross-compilation support
- simpler module/loader interface (no exported symbols)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@40722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Matthew Jordan
Jonathan Rose
Leif Madsen
Paul Belanger
David Vossel
Tilghman Lesher
Russell Bryant
Olle Johansson
Richard Mudgett
Mark Michelson
Jeff Peeler
Matthew Nicholson
Kevin P. Fleming
Sean Bright
Michiel van Baak
Joshua Colp
Terry Wilson
Steve Murphy
Luigi Rizzo
Matt O'Gorman