asterisk

Commit Graph

Author	SHA1	Message	Date
zuul	a4771230fe	Merge "pbx.c: Allow dangerous functions when adding a hint to dialplan." into 14	10 years ago
Joshua Colp	94a3c1f178	Merge "dsp.c: Add fax and DTMF detection unit tests." into 14	10 years ago
Joshua Colp	baa2629845	Merge "dsp.c: Added descriptive comments to Goertzel calculations." into 14	10 years ago
Joshua Colp	0dcbed074b	Merge "dsp.c: Fix incorrect format reference typo." into 14	10 years ago
Richard Mudgett	5316f49a2d	pbx.c: Allow dangerous functions when adding a hint to dialplan. We can allow dangerous functions when adding a hint since altering dialplan is itself a privileged activity. Otherwise, we could never execute dangerous functions. ASTERISK-25996 #close Reported by: Andrew Nagy Change-Id: I4929ff100ad1200a0198262d069a34f2296e77ba	10 years ago
Kevin Harwell	e5529c4493	rtp_engine: Failed assertion and wrong name given for codec Fixed an assert check that would trigger when the passed in value was negative. The negative value was being cast to an unsigned value. This resulted in the check failing. Also fixed another problem when loading formats in the engine. When setting the mime type the format's name was being passed in instead of the codec's name. Change-Id: I1a201cd419ba4d8e9a40d337e36b6fbe1737192c	10 years ago
Richard Mudgett	5f54805e62	dsp.c: Add fax and DTMF detection unit tests. * Add fax amplitude and frequency sweep tests. * Add DTMF amplitude and twist unit tests. Change-Id: I8d77c9a1eec89e440d715f998c928687e870c3f7	10 years ago
Richard Mudgett	ebc2b7695d	dsp.c: Added descriptive comments to Goertzel calculations. * Added doxygen to describe some struct members and what is going on in the code. Change-Id: I2ec706a33b52aee42b16dcc356c2bd916a45190d	10 years ago
Richard Mudgett	a7e747918d	dsp.c: Fix incorrect format reference typo. Change-Id: Ia131da3ec29acf385cb43a586a29ecc975eb3896	10 years ago
Richard Mudgett	ba449e0242	dsp.c: Fix erroneous fax tone detection. The Goertzel calculations get less accurate the lower the signal level being worked with becomes because there is less resolution remaining. If it is too low we can erroneously detect a tone where none really exists. The searched for fax frequencies not only need to be so much stronger than the background noise they must also be a minimum strength. * Add needed minimum threshold test to tone_detect(). * Set TONE_THRESHOLD to allow low volume frequency spread detection. ASTERISK-26237 #close Reported by: Richard Mudgett Change-Id: I84dbba7f7628fa13720add6a88eae3b129e066fc	10 years ago
zuul	e7fc209b26	Merge "codecs: Add iLBC 20." into 14	10 years ago
George Joseph	58759bd77c	asterisk.c: Add auto generation and persistence of UUID Upcoming features will require the generation and persistence of a UUID. Change-Id: I3ec0062427e133217db6ef496a4216f427c3b92d	10 years ago
Joshua Colp	804c3e6b9e	Merge "res_srtp: Enable AES-256 and AES-GCM." into 14	10 years ago
Alexander Traud	c82f24f36a	codecs: Add iLBC 20. Asterisk already supported iLBC 30. This change adds iLBC 20. Now, Asterisk defaults to iLBC 20 but falls back to iLBC 30, when the remote party requests this. ASTERISK-26218 #close ASTERISK-26221 #close Reported by: Aaron Meriwether Change-Id: I07f523a3aa1338bb5217a1bf69c1eeb92adedffa	10 years ago
Richard Mudgett	d11731ac2f	res_pjsip: Add fax_detect_timeout endpoint option. The new endpoint option allows the PJSIP channel driver's fax_detect endpoint option to timeout on a call after the specified number of seconds into a call. The new feature is disabled if the timeout is set to zero. The option is disabled by default. ASTERISK-26214 Reported by: Richard Mudgett Change-Id: Id5a87375fb2c4f9dc1d4b44c78ec8735ba65453d	10 years ago
zuul	8551830abc	Merge "pbx: Create pbx_sw.c for management of 'struct ast_sw'." into 14	10 years ago
Alexander Traud	2103ad1fec	res_srtp: Enable AES-256 and AES-GCM. ASTERISK-26190 #close Change-Id: I11326d80edd656524a51a19450e586c583aa0a0b	10 years ago
Corey Farrell	05cfe1a76e	Add conditional support for noreturn functions. This adds support for tagging functions with the noreturn attribute. If DO_CRASH is enabled then ast_do_crash never returns. If AST_DEVMODE and DO_CRASH are enabled then failed assertions never return. This can resolve a large number of false positives with static analyzers. ASTERISK-26220 #close Change-Id: Icfb61e5fe54574eced4c3e88b317244f467ec753	10 years ago
Corey Farrell	0c88fb460f	pbx: Create pbx_sw.c for management of 'struct ast_sw'. This changes context switches from a linked list to a vector, makes 'struct ast_sw' opaque to pbx.c. Although ast_walk_context_switches is maintained the procedure is no longer efficient except for the first call (inc==NULL). This functionality is replaced by two new functions implemented by vector macros. * ast_context_switches_count (AST_VECTOR_SIZE) * ast_context_switches_get (AST_VECTOR_GET) As with ast_walk_context_switches callers of these functions are expected to have locked contexts. Only a few places in Asterisk walked the switches, they have been converted to use the new functions. Change-Id: I08deb016df22eee8288eb03de62593e45a1f0998	10 years ago
zuul	b1c45dc815	Merge "pbx: Create pbx_ignorepat.c for management of 'struct ast_ignorepat'."	10 years ago
Joshua Colp	943bb48b59	Merge "pbx: Create pbx_include.c for management of 'struct ast_include'."	10 years ago
Corey Farrell	e2e8713b84	pbx: Create pbx_ignorepat.c for management of 'struct ast_ignorepat'. This changes context ignore patterns from a linked list to a vector, makes 'struct ast_ignorepat' opaque to pbx.c. Although ast_walk_context_ignorepats is maintained the procedure is no longer efficient except for the first call (inc==NULL). This functionality is replaced by two new functions implemented by vector macros. * ast_context_ignorepats_count (AST_VECTOR_SIZE) * ast_context_ignorepats_get (AST_VECTOR_GET) As with ast_walk_context_ignorepats callers of these functions are expected to have locked contexts. Only a few places in Asterisk walked the ignorepats, they have been converted to use the new functions. Change-Id: I78f2157d275ef1b7d624b4ff7d770d38e5d7f20a	10 years ago
Corey Farrell	be36bd7ca5	pbx: Create pbx_include.c for management of 'struct ast_include'. This changes context includes from a linked list to a vector, makes 'struct ast_include' opaque to pbx.c. Although ast_walk_context_includes is maintained the procedure is no longer efficient except for the first call (inc==NULL). This functionality is replaced by two new functions implemented by vector macros. * ast_context_includes_count (AST_VECTOR_SIZE) * ast_context_includes_get (AST_VECTOR_GET) As with ast_walk_context_includes callers of these functions are expected to have locked contexts. Only a few places in Asterisk walked the includes, they have been converted to use the new functions. const have been applied where possible to parameters for ast_include functions. Change-Id: Ib5c882e27cf96fb2aec67a39c18b4c71c9c83b60	10 years ago
Corey Farrell	d3348c51b5	features.c: Remove unneeded adsi.h include. adsi.h is no longer used by features.c since parking was moved to a module. Change-Id: I2248b8a455225a17cb6ddaafd6c20c511a1eaf59	10 years ago
Mark Michelson	273052f404	Update support for SILK format. This commit adds scaffolding in order to support the SILK audio format on calls. Roughly, this is what is added: * Cached silk formats. One for each possible sample rate. * ast_codec structures for each possible sample rate. * RTP payload mappings for "SILK". In addition, this change overhauls the res_format_attr_silk file in the following ways: * The "samplerate" attribute is scrapped. That's native to the format. * There are far more checks to ensure that attributes have been allocated before attempting to reference them. * We do not SDP fmtp lines for attributes set to 0. These changes make way to be able to install a codec_silk module and have it actually work. It also should allow for passthrough silk calls in Asterisk. Change-Id: Ieeb39c95a9fecc9246bcfd3c45a6c9b51c59380e	10 years ago
zuul	3cf33dd4e7	Merge "translate: explicit format destination not properly set"	10 years ago
zuul	afcc519dff	Merge "threadpool: Fix leak in ast_threadpool_serializer_group error path."	10 years ago
zuul	707dbcbcd1	Merge "pbx: Fix leak of timezone for time based includes."	10 years ago
zuul	f0f137e5bd	Merge "stasis_endpoint.c: Fix contactstatus_to_json()."	10 years ago
Corey Farrell	f3608b50d7	pbx: Fix leak of timezone for time based includes. Create include_free to run ast_destroy_timing and ast_free, use that in all places that freed an ast_include structure. This fixes a couple of paths that previously did not run ast_destroy_timing. ASTERISK-26196 #close Change-Id: I1671bd111bef0dc113e8bf8f77f89fcfc395d838	10 years ago
Kevin Harwell	63ac4c9487	translate: explicit format destination not properly set If the destination format's name differed from the codec name then the translator's explict_dst field would be improperly set. In some circumstances it would end up setting it to a newly created format that has the same name as the codec when it actually needed to be the given destination codec. This could cause the translation path to use the wrong format. For instance, if an endpoint had specified 'myulaw' as a format the translator could end up using a 'ulaw' format (with whatever/default settings) instead. If the format attribute settings differed between the two then there may unexpected results during processing. This patch removes the name check when building the translation path. This should make it always set the translator's explicit_dst to the given destination format as long as the sample rate and types match. Change-Id: Iaf8a03831d68e657d89569d54b505074efbefab5	10 years ago
Richard Mudgett	2f26512fd8	stasis_endpoint.c: Fix contactstatus_to_json(). The roundtrip_usec json member is optional. If it isn't present then don't put it into the converted json structure where ast_json_pack() will choke on it. Change-Id: I39bb2f86154ef54591270c58bfda8635070f9ea0	10 years ago
Corey Farrell	fd54d69feb	threadpool: Fix leak in ast_threadpool_serializer_group error path. ast_threadpool_serializer_group leaks a reference to ser when listener is allocated but tps is not. Although listener takes the reference to ser cleanup functions are not run without tps. ASTERISK-26191 #close Change-Id: Ie3ccf69a3f1e676c2ef62a77067c0cb57dc9a585	10 years ago
Matt Jordan	f12311ee69	res/res_corosync: Raise a Stasis message on node join/leave events When res_corosync detects that a node leaves or joins, it currently is informed of this via Corosync callbacks. However, there are a few limitations with the information presented: (1) While we have information that Corosync is aware of - such as the Corosync nodeid - that information is really only useful inside of Corosync or res_corosync. There's no way to translate a Corosync nodeid to some other internally useful unique identifier for the Asterisk instance that just joined or left the cluster. (2) While res_corosync is notified of the instance joining or leaving the cluster, it has no mechanism to inform the Asterisk core or other modules of this event. This limits the usefulness of res_corosync as a heartbeat mechanism for other modules. This patch addresses both issues. First, it adds the notion of a cluster discovery message both within the Stasis message bus, as well as the binary event messages that res_corosync uses to transmit data back and forth within the cluster. When Asterisk joins the cluster, it sends a discovery message to the other nodes in the cluster, which correlates the Corosync nodeid along with the Asterisk EID. res_corosync now maintains a hash of Corosync nodeids to Asterisk EIDs, such that it can map changes in cluster state with the Asterisk instance that has that nodeid. Likewise, when an Asterisk instance receives a discovery message from a node in the cluster, it now sends its own discovery message back to the originating node with the local Asterisk EID. This lets Asterisk instances within the cluster build a complete picture of the other Asterisk instances within the cluster. Second, it publishes the discovery messages onto the Stasis message bus. Said messages are published whenever a node joins or leaves the cluster. Interested modules can subscribe for the ast_cluster_discovery_type() message under the ast_system_topic() and be notified when changes in cluster state occur. Change-Id: I9015f418d6ae7f47e4994e04e18948df4d49b465	10 years ago
George Joseph	886f2cab23	rest_api/channels: Fix multiple issues with create and dial * We weren't properly subscribing to the channel and it's originator on create. * We weren't doing a publish_dial after calling ast_call on dial. * We weren't calling depart_bridge when a channel left the dial bridge. The first 2 issues were causing events to not be generated and the third was actually causing channels to not get properly destroyed when hung up. Together these 3 issues were causing the new rest_apichannels/create_dial_bridge tests to fail. As a result of the fixes, the cdr state machine had to be slightly tweaked to allow bridge leave events without asserting and the tests themselves had to be updated to account for the channels now cleaning themselves up. Change-Id: Ibf23abf5a62de76e82afb4461af5099c961b97d8	10 years ago
Richard Mudgett	44f16af7cc	ast_expr2: Fix off-nominal memory leak. Thanks to ibercom for pointing out a memory leak that was missed in the earlier patch for the issue. ASTERISK-26119 Reported by: Alexei Gradinari Change-Id: I9a151f5c4725d97fb82a9e938bc73dc659532b71	10 years ago
Corey Farrell	7408c51a48	REF_DEBUG: Prevent logging of container node objects. Using AO2_CONTAINER_ALLOC_OPT_DUPS_REPLACE can result in an unref being recorded to the refs log for the node being replaced. This prevents logging of those unrefs since they would produce errors in refcounter.py. ASTERISK-26181 #close Change-Id: Ie4fded84e8a1a58b3a59ce59dfd7eb0da3ddc5d4	10 years ago
Richard Mudgett	4f7b859726	features: Fix channel datastore access. Found as a result of the testsuite tests/callparking test crashing. Several calls to ast_get_chan_featuremap_config() and ast_get_chan_features_xfer_config() did not lock the channel before calling so the channel's datastore list was accessed without the lock's protection. Apparently another thread deleted a datastore on the channel's list while the crashing thread was walking the list. Crash at 0xdeaddead due to MALLOC_DEBUG's memory filler value as a result. * Add missing channel locks to calls that were not already protected as the doxygen for those calls indicates. Change-Id: Id273b3d305cc616406c353cbc841b2b7655efaa1	10 years ago
George Joseph	4045e6d8ba	codecs: Fix ABI incompatibility created by adding format_name to ast_codec Adding format_name even to the end of ast_codec caused issued with binary codec modules because the pointer would be garbage in asterisk when they registered. So, the ast_codec structure was reverted and an internal_ast_codec structure was created just for use in codec.c. A new internal-only API was also added (__ast_codec_register_with_format) so that codec_builtin could register codecs with the format_name in a separate parameter rather than in the ast_codec structure. ASTERISK-26144 #close Reported-by: Alexei Gradinari Change-Id: I6df1b08f6a6ae089db23adfe1ebc8636330265ba	10 years ago
George Joseph	651290a809	BuildSystem: Fix a few issues hightlighted by gcc 6.x gcc 6.1.1 caught a few more issues. Made sure the unit tests still pass for the func_env and stdtime issues. ASTERISK-26157 #close Change-Id: I6664d8f34a45bc1481d2a854481c7878b0c1cf8e	10 years ago
Joshua Colp	8b85b05092	Merge "Fix Alembic upgrades."	10 years ago
Mark Michelson	b6bd97eea2	Fix Alembic upgrades. A non-existent constraint was being referenced in the upgrade script. This patch corrects the problem by removing the reference. In addition, the head of the alembic branch referred to a non-existent revision. This has been fixed by referring to the proper revision. This patch fixes another realtime problem as well. Our Alembic scripts store booleans as yes or no values. However, Sorcery tries to insert "true" or "false" instead. This patch introduces a new boolean type that translates to "yes" or "no" instead. ASTERISK-26128 #close Change-Id: I51574736a881189de695a824883a18d66a52dcef	10 years ago
zuul	d22ce6fd3e	Merge "fix: memory leaks, resource leaks, out of bounds and bugs"	10 years ago
Alexei Gradinari	820ed3d4b3	fix: memory leaks, resource leaks, out of bounds and bugs ASTERISK-26119 #close Change-Id: Iecbf7d0f360a021147344c4e83ab242fd1e7512c	10 years ago
Alexander Traud	f72ffc1ff9	http: leverage 'bindaddr' for TLS in http.conf The internal HTTP/WebSocket server supports both TCP and TLS, which can be activated separately via the file http.conf. The source code intends to re-use the TCP parameter 'bindaddr' for TLS, even if 'tlsbindaddr' is not specified explicitly. This did not work because of a typo. This change resolves this typo. ASTERISK-26126 #close Change-Id: I5efb0409ae12044dfb3495b6b97b6d40a8c9c51f	10 years ago
zuul	d9b5aea9c3	Merge "core: Not the configured but granted number of possible file descriptors."	10 years ago
Alexander Traud	ac683f13c9	core: Not the configured but granted number of possible file descriptors. With CLI "core show settings", simply the parameter maxfiles of the file asterisk.conf was shown. If that parameter was not set, nothing was displayed although the environment might have set a default number itself. Or if maxfiles were not granted (completely), still maxfiles was shown. Now, the maximum number of possible file descriptors in the environment is shown. ASTERISK-26097 Change-Id: I2df5c58863b5007b34b77adbe28b885dfcdf7e0b	10 years ago
Joshua Colp	d1006faba9	Merge "astfd: With RLIMIT_NOFILE only the current value is sensible."	10 years ago
Joshua Colp	4eb8cf2684	translate: Enables native Packet-Loss Concealment (PLC) for supporting codecs. This reverts commit `5bfef2a8b4` as it caused fax test failures. ASTERISK-25629 Change-Id: I79de974dc4f63a1cafe0d2509169fd9a6b3cbaf4	10 years ago
Alexander Traud	0bf1a53db3	astfd: With RLIMIT_NOFILE only the current value is sensible. With menuselect "DEBUG_FD_LEAKS" and CLI "core show fd", both the maximum max and current max of possible file descriptors were shown. Both show the same value always. Not to confuse users, just the current maximum is shown now. ASTERISK-26097 Change-Id: I49cf7952d73aec9e3f6a88942842c39be18380fa	10 years ago

1 2 3 4 5 ...

5361 Commits (a4771230feb3ecdc8aabeb71589cb2aeb7614d8f)