584 Commits (a45af3298319b54649abe00b5841f95cc9fe3ae7)

Author	SHA1	Message	Date
Richard Mudgett	07d026b4cd	res_pjsip: Remove ephemeral registered contacts on transport shutdown. ... The fix for the issue is broken up into three parts. This is part two which handles the server side of REGISTER requests when rewrite_contact is enabled. Any registered reliable transport contact becomes invalid when the transport connection becomes disconnected. * Monitor the rewrite_contact's reliable transport REGISTER contact for shutdown. If it is shutdown then the contact must be removed because it is no longer valid. Otherwise, when the client attempts to re-REGISTER it may be blocked because the invalid contact is there. Also if we try to send a call to the endpoint using the invalid contact then the endpoint is not likely to see the request. The endpoint either won't be listening on that port for new connections or a NAT/firewall will block it. * Prune any rewrite_contact's registered reliable transport contacts on boot. The reliable transport no longer exists so the contact is invalid. * Websockets always rewrite the REGISTER contact address and the transport needs to be monitored for shutdown. * Made the websocket transport set a unique name since that is what we use as the ao2 container key. Otherwise, we would not know which transport we find when one of them shuts down. The names are also used for PJPROJECT debug logging. * Made the websocket transport post the PJSIP_TP_STATE_CONNECTED state event. Now the global keep_alive_interval option, initially idle shutdown timer, and the server REGISTER contact monitor can work on wetsocket transports. * Made the websocket transport set the PJSIP_TP_DIR_INCOMING direction. Now initially idle websockets will automatically shutdown. ASTERISK-27147 Change-Id: I397a5e7d18476830f7ffe1726adf9ee6c15964f4	8 years ago
Sean Bright	cea4ce246d	corosync: Fix corosync library name in configure.ac ... Also add new corosync packages to install_prereq. Reported by Travis Ryan in #asterisk-dev Change-Id: Ib861c95ba630fed62dc54e56784ad8446ed9d2db	8 years ago
George Joseph	379fe65831	Fix alembic branches ... Change-Id: I04f607f084bda9b1b7f626e8e9735c37dc751187	8 years ago
Torrey Searle	9fbc34d2bd	res_pjsip: Add DTMF INFO Failback mode ... The existing auto dtmf mode reverts to inband if 4733 fails to be negotiated. This patch adds a new mode auto_info which will switch to INFO instead of inband if 4733 is not available. ASTERISK-27066 #close Change-Id: Id185b11e84afd9191a2f269e8443019047765e91	8 years ago
Alexei Gradinari	a6e4899612	res_pjsip: New endpoint option "notify_early_inuse_ringing" ... This option was added to control whether to notify dialog-info state 'early' or 'confirmed' on Ringing when already INUSE. The value "yes" is useful for some SIP phones (Cisco SPA) to be able to indicate and pick up ringing devices. ASTERISK-26919 #close Change-Id: Ie050bc30023543c7dfb4365c5be3ce58c738c711	8 years ago
Alexei Gradinari	6af2dd34af	res_pjsip: New endpoint option "refer_blind_progress" ... This option was added to turn off notifying the progress details on Blind Transfer. If this option is not set then the chan_pjsip will send NOTIFY "200 OK" immediately after "202 Accepted". Some SIP phones like Mitel/Aastra or Snom keep the line busy until receive "200 OK". ASTERISK-26333 #close Change-Id: Id606fbff2e02e967c02138457badc399144720f2	8 years ago
Joshua Colp	c09b9dba90	alembic: Add table for 'resource_list' PJSIP RLS type. ... This change adds an Alembic migration which adds a ps_resource_list table that can contain resource_list RLS configuration objects. ASTERISK-26929 Change-Id: I7c888fafc67b3e87012de974f71ca7a5b8b1ec05	8 years ago
Joshua Colp	b3f4a6365e	pjsip: Add Alembic for PUBLISH support. ... This change adds database tables for the PUBLISH support so it can be configured using realtime. A minor fix to the res_pjsip_publish_asterisk module was done so that it read the sorcery configuration from the correct section. Finally the sample configuration files have been updated. ASTERISK-26928 Change-Id: I81991ae5c75af98d247f7eacd1c0b0a763675952	8 years ago
Joshua Colp	1d1309b1ed	Revert "Update for 13.15.0-rc1" ... This reverts commit 552cf009c0. Change-Id: Ie345bea481261b761c44079e9472622040fda302	8 years ago
Joshua Colp	e52ced02d8	Merge "cel_pgsql.c: Fix buffer overflow calling libpq" into 13	8 years ago
Sean Bright	864dda07f3	alembic: Turn off execute bit on non-executable python scripts ... Change-Id: I744c986da4a38aeff8c00837eb89de7841fbc86c	8 years ago
Kevin Harwell	552cf009c0	Update for 13.15.0-rc1	8 years ago
Richard Begg	398e5ec16c	res_pjsip_session: Enable RFC3578 overlap dialing support. ... Support for RFC3578 overlap dialling (i.e. 484 Response to partially matched destinations) as currently provided by chan_sip is missing from res_pjsip. This patch adds a new endpoint attribute (allow_overlap) [defaults to yes] which when set to yes enables 484 responses to partial destination matches rather than the current 404. ASTERISK-26864 Change-Id: Iea444da3ee7c7d4f1fde1d01d138a3d7b0fe40f6	8 years ago
George Joseph	9b756662a8	res_pjsip: Symmetric transports ... A new transport parameter 'symmetric_transport' has been added. When a request from a dynamic contact comes in on a transport with this option set to 'yes', the transport name will be saved and used for subsequent outgoing requests like OPTIONS, NOTIFY and INVITE. It's saved as a contact uri parameter named 'x-ast-txp' and will display with the contact uri in CLI, AMI, and ARI output. On the outgoing request, if a transport wasn't explicitly set on the endpoint AND the request URI is not a hostname, the saved transport will be used and the 'x-ast-txp' parameter stripped from the outgoing packet. * config_transport was modified to accept and store the new parameter. * config_transport/transport_apply was updated to store the transport name in the pjsip_transport->info field using the pjsip_transport->pool on UDP transports. * A 'multihomed_on_rx_message' function was added to pjsip_message_ip_updater that, for incoming requests, retrieves the transport name from pjsip_transport->info and retrieves the transport. If transport->symmetric_transport is set, an 'x-ast-txp' uri parameter containing the transport name is added to the incoming Contact header. * An 'ast_sip_get_transport_name' function was added to res_pjsip. It takes an ast_sip_endpoint and a pjsip_sip_uri and returns a transport name if endpoint->transport is set or if there's an 'x-ast-txp' parameter on the uri and the uri host is an ipv4 or ipv6 address. Otherwise it returns NULL. * An 'ast_sip_dlg_set_transport' function was added to res_pjsip which takes an ast_sip_endpoint, a pjsip_dialog, and an optional pjsip_tpselector. It calls ast_sip_get_transport_name() and if a non-NULL is returned, sets the selector and sets the transport on the dialog. If a selector was passed in, it's updated. * res_pjsip/ast_sip_create_dialog_uac and ast_sip_create_dialog_uas were modified to call ast_sip_dlg_set_transport() instead of their original logic. * res_pjsip/create_out_of_dialog_request was modified to call ast_sip_get_transport_name() and pjsip_tx_data_set_transport() instead of its original logic. * Existing transport logic was removed from endpt_send_request since that can only be called after a create_out_of_dialog_request. * res_pjsip/ast_sip_create_rdata was converted to a wrapper around a new 'ast_sip_create_rdata_with_contact' function which allows a contact_uri to be specified in addition to the existing parameters. (See below) * res_pjsip_pubsub/internal_pjsip_evsub_send_request was eliminated since all it did was transport selection and that is now done in ast_sip_create_dialog_uac and ast_sip_create_dialog_uas. * 'contact_uri' was added to subscription_persistence. This was necessary because although the parsed rdata contact header has the x-ast-txp parameter added (if appropriate), subscription_persistence_update stores the raw packet which doesn't have it. subscription_persistence_recreate was then updated to call ast_sip_create_rdata_with_contact with the persisted contact_uri so the recreated subscription has the correct transport info to send the NOTIFYs. * res_pjsip_session/internal_pjsip_inv_send_msg was eliminated since all it did was transport selection and that is now done in ast_sip_create_dialog_uac. * pjsip_message_ip_updater/multihomed_on_tx_message was updated to remove all traces of the x-ast-txp parameter from the outgoing headers. NOTE: This change does NOT modify the behavior of permanent contacts specified on an aor. To do so would require that the permanent contact's contact uri be updated with the x-ast-txp parameter and the aor sorcery object updated. If we need to persue this, we need to think about cloning permanent contacts into the same store as the dynamic ones on an aor load so they can be updated without disturbing the originally configured value. You CAN add the x-ast-txp parameter to a permanent contact's uri but it would be much simpler to just set endpoint->transport. Change-Id: I4ee1f51473da32ca54b877cd158523efcef9655f	8 years ago
Mark Michelson	7bc69753bc	Add rtcp-mux support ... This commit adds support for RFC 5761: Multiplexing RTP Data and Control Packets on a Single Port. Specifically, it enables the feature when using chan_pjsip. A new option, "rtcp_mux" has been added to endpoint configuration in pjsip.conf. If set, then Asterisk will attempt to use rtcp-mux with whatever it communicates with. Asterisk follows the rules set forth in RFC 5761 with regards to falling back to standard RTCP behavior if the far end does not indicate support for rtcp-mux. The lion's share of the changes in this commit are in res_rtp_asterisk.c. This is because it was pretty much hard wired to have an RTP and an RTCP transport. The strategy used here is that when rtcp-mux is enabled, the current RTCP transport and its trappings (such as DTLS SSL session) are freed, and the RTCP session instead just mooches off the RTP session. This leads to a lot of specialized if statements throughout. ASTERISK-26732 #close Reported by Dan Jenkins Change-Id: If46a93ba1282418d2803e3fd7869374da8b77ab5	8 years ago
Matt Jordan	b3c2c996f1	res_pjsip_endpoint_identifier_ip: Add an option to match requests by header ... This patch adds a new features to the endpoint identifier module, 'match_header'. When set, inbound requests are matched by a provided SIP header: value pair. This option works in conjunction with the existing 'match' configuration option, such that if any 'match*' attribute matches an inbound request, the request is associated with the specified endpoint. Since this module now identifies by more than just IP address, appropriate renaming of the module and/or variables can be done in a non-release branch. ASTERISK-26863 #close Change-Id: Icfc14835c962f92e35e67bbdb235cf0589de5453 (cherry picked from commit 30f52d79d7)	8 years ago
George Joseph	7fd28cefdb	debug_utilities: Install ast_logescalator to /var/lib/asterisk/scripts ... Forgot to install it with the original patch Change-Id: I8bdb540a6694971ae5fe21f48d532332c6482e4c	8 years ago
George Joseph	456bc3c704	debug_utilities: Add ast_logescalator ... The escalator works by creating a set of startup commands in cli.conf that set up logger channels and issue the debug commands for the subsystems specified. If asterisk is running when it is executed, the same commands will be issued to the running instance. The original cli.conf is saved before any changes are made and can be restored by executing '$prog --reset'. The log output will be stored in... $astlogdir/message.$uniqueid $astlogdir/debug.$uniqueid $astlogdir/dtmf.$uniqueid $astlogdir/fax.$uniqueid $astlogdir/security.$uniqueid $astlogdir/pjsip_history.$uniqueid $astlogdir/sip_history.$uniqueid Some minor tweaks were made to chan_sip, and res_pjsip_history so their history output could be send to a log channel as packets are captured. A minor tweak was also made to manager so events are output to verbose when "manager set debug on" is issued. Change-Id: I799f8e5013b86dc5282961b27383d134bf09e543	8 years ago
George Joseph	c628a7acac	debug_utilities: Create ast_loggrabber ... ast_loggrabber gathers log files from customizable search patterns, optionally converts POSIX timestamps to a readable format and tarballs the results. Also a few tweaks were made to ast_coredumper. Change-Id: I8bfe1468ada24c1344ce4abab7b002a59a659495 (cherry picked from commit 5fa1c56d7e)	8 years ago
George Joseph	47474cfd54	debug_utilities: Create the ast_coredumper utility ... This utility allows easy manipulation of asterisk coredumps. * Configurable search paths and patterns for existing coredumps * Can generate a consistent coredump from the running instance * Can dump the lock_infos table from a coredump * Dumps backtraces to separate files... - thread apply 1 bt full -> <coredump>.thread1.txt - thread apply all bt -> <coredump>.brief.txt - thread apply all bt full -> <coredump>.full.txt - lock_infos table -> <coredump>.locks.txt * Can tarball corefiles and optionally delete them after processing * Can tarball results files and optionally delete them after processing * Converts ':' in coredump and results file names '-' to facilitate uploading. Jira for instance, won't accept file names with colons in them. Tested on Fedora24+, Ubuntu14+, Debian6+, CentOS6+ and FreeBSD9+[1]. [1] For *BSDs, the "devel/gdb" package might have to be installed to get a recent gdb. The utility will check all instances of gdb it finds in $PATH and if one isn't found that can run python, it prints a friendly error. Change-Id: I935d37ab9db85ef923f32b05579897f0893d33cd	9 years ago
Joshua Colp	37aaaa2da2	res_pjsip_endpoint_identifier_ip: Add support for SRV lookups. ... This change implements SRV support for the IP based endpoint identifier module. All possible addresses through SRV are looked up and added as matches. If no SRV records are available a fallback to normal host resolution is done. If an IP address is provided then no SRV lookup occurs. This is configured using the "srv_lookups" option on the identify section and defaults to "yes". ASTERISK-26693 Change-Id: I6b641e275bf96629320efa8b479737062aed82ac	9 years ago
Richard Mudgett	35736d419a	autosupport: Add 'pjproject show buildopts' ... Change-Id: I8aa55a7c3fb175235ddc7f85e9457d5102d06fa7	9 years ago
Richard Mudgett	580f83dac7	Remove files that got merged in error somehow to the 13 branch. ... Change-Id: Id79e2226c31084f9252d5aede9050d3cf13322c8	9 years ago
Joshua Colp	8d56016ae4	Merge "tcptls: Use new certificate upon sip reload" into 13	9 years ago
Joshua Colp	e0bc17edff	pjsip: Fix a few media bugs with reinvites and asymmetric payloads. ... When channel format changes occurred as a result of an RTP re-negotiation the bridge was not informed this had happened. As a result the bridge technology was not re-evaluated and the channel may have been in a bridge technology that was incompatible with its formats. The bridge is now unbridged and the technology re-evaluated when this occurs. The chan_pjsip module also allowed asymmetric codecs for sending and receiving. This did not work with all devices and caused one way audio problems. The default has been changed to NOT do this but to match the sending codec to the receiving codec. For users who want asymmetric codecs an option has been added, asymmetric_rtp_codec, which will return chan_pjsip to the previous behavior. The codecs returned by the chan_pjsip module when queried by the bridge_native_rtp module were also not reflective of the actual negotiated codecs. The nativeformats are now returned as they reflect the actual negotiated codecs. ASTERISK-26423 #close Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc	9 years ago
Joshua Colp	bb982480d8	pjsip: Support dual stack automatically. ... This change adds support for dual stack automatically. No configuration is required and the IP address and version in the SIP messages and SDP will be automatically changed based on the transport over which the message is being sent. RTP usage has also been changed to listen on both IPv4 and IPv6 simultaneously to allow media to flow, and to allow ICE support on both simultaneously. This also allows failover between IPv6 and IPv4 to work as expected. ASTERISK-26309 #close Change-Id: I235a421d8f9a326606d861b449fa6fe3a030572d	9 years ago
Mark Michelson	df75b647da	Update for 13.12.0-rc1	9 years ago
Rodrigo Ramírez Norambuena	29b7a5b00f	Add text of cdr directory into README.md for ast-db-manage ... Change-Id: I68321c4bea50730c39fdb486e5f23aeadd1ad636	9 years ago
George Joseph	86550f9c17	alembic: Allow cdr, config and voicemail to exist in the same schema ... cdr, config and voicemail are all separate alembic trees. Because alembic's default is to use a table named 'alembic_version' to store the current tree revision, the 3 trees can't exist in the same schema without stepping on each other. Now each tree uses 'alembic_version_<tree_name>' as the version table. Each tree's env.py script now first checks for 'alembic_version'. If it finds it AND its revision is in the tree's history, the script renames it to 'alembic_version_<tree_name>'. Regardless, the script then continues with the migration using 'alembic_version_<tree_name>' and creates that table if it's not found. The result is that if an existing 'alembic_version' table was found but it didn't belong to this tree, it's left alone and 'alembic_version_<tree_name>' is used or created. WARNING: If multiple trees are using the same schema, they MUST NOT CRU or D any objects with names that might exist in the other trees. An example would be 'yesno_values' type. If two trees perform operations on it, one tree could pull it out from under the other. Thankfully we currently don't share any names among cdr, config and voicemail. NOTE: Since the env.py scripts in each tree were identical, a common env.py has been placed in the ast-db-manage directory and a symlink to it has been placed in each tree directory. ASTERISK-24311 #close Reported-by: Dafi Ni Change-Id: I4d593f000350deb5d21a14fa1e9bc3896844d898	9 years ago
zuul	139d86c8ab	Merge "sip_to_pjsip.py: Map legacy_useroption_parsing." into 13	9 years ago
zuul	a5f7b07579	Merge "res_pjsip: Add ignore_uri_user_options option." into 13	9 years ago
Richard Mudgett	e9ddab4685	sip_to_pjsip.py: Map legacy_useroption_parsing. ... Map the sip.conf general section legacy_useroption_parsing to the new pjsip.conf global ignore_uri_user_options. ASTERISK-26316 Reported by: Kevin Harwell Change-Id: I78108a31995db19d41f4e1a07b3324692c5363fc	9 years ago
Richard Mudgett	30af92e78d	res_pjsip: Add ignore_uri_user_options option. ... This implements the chan_sip legacy_useroption_parsing option but with a better name. * Made the caller-id number and redirecting number strings obtained from incoming SIP URI user fields always truncated at the first semicolon. People don't care about anything after the semicolon showing up on their displays even though the RFC allows the semicolon. ASTERISK-26316 #close Reported by: Kevin Harwell Change-Id: Ib42b0e940dd34d84c7b14bc2e90d1ba392624f62	9 years ago
Walter Doekes	7ed5dc2c58	contrib: Let safe_asterisk script continue without /dev/tty9. ... If you use the safe_asterisk script, it uses hardcoded defaults before running configurable values from /etc/asterisk/startup.d. The hardcoded default has TTY=9. Some containerized environments don't have such a TTY, and safe_asterisk would stop. The custom configuration from /etc/asterisk/startup.d/* isn't read until after it stopped, so changing TTY in a custom config did not help. This changeset changes safe_asterisk to continue if the TTY setting was untouched and /dev/tty9 and /dev/vc/9 aren't found. Change-Id: I2c7cdba549b77f418a0af4cb1227e8e6fe4148fc	9 years ago
zuul	52335c3fe7	Merge "sip_to_pjsip.py: Map canreinvite as directmedia alias." into 13	9 years ago
zuul	e3f549c2f6	Merge "sip_to_pjsip.py: Fix typo converting outboundproxy registration." into 13	9 years ago
Richard Mudgett	3314e1cec2	sip_to_pjsip.py: Map canreinvite as directmedia alias. ... Change-Id: I48b8e150f96a3d2a24d8fc25fbe4f5aff9f4a6b2	9 years ago
Richard Mudgett	6372f40ba0	sip_to_pjsip.py: Fix typo converting outboundproxy registration. ... Change-Id: I6f30e5f9fcf8469ba0079fbf884047d54c2c0b15	9 years ago
Richard Mudgett	11eb1afd2d	sip_to_pjsip.py: Fix comment typo and tabs. ... Change-Id: If35174614545727817d329c60ba4456c028941b5	9 years ago
Alexander Traud	b59d3b48d0	sip_to_pjsip: Migrate IPv4/IPv6 (Dual Stack) configurations. ... When using the migration script sip_to_pjsip.py, and your sip.conf is configured with bindaddr=::, two transports are written to pjsip.conf, one for 0.0.0.0 (IPv4) and one for [::] (IPv6). That way, PJProject listens on the IPv4 and IPv6 wildcards; a IPv4/IPv6 Dual Stack configuration on a single interface like in chan_sip. Furthermore, the script internal functions "build_host" and "split_hostport" did not parse Literal IPv6 addresses as expected (like [::1]:5060). This change makes sure, even such addresses are parsed correctly. ASTERISK-26309 Change-Id: Ia4799a0f80fc30c0550fc373efc207c3330aeb48	9 years ago
zuul	8778e22b15	Merge "sip_to_pjsip: Map externhost/ip to Transports." into 13	9 years ago
zuul	f46f88157e	Merge "sip_to_pjsip: Add cert_file." into 13	9 years ago
zuul	504da21d47	Merge "res_pjsip: Add contact_user to endpoint" into 13	9 years ago
Alexander Traud	a628009eb9	sip_to_pjsip: Add cert_file. ... When using the migration script sip_to_pjsip.py, cert_file was not migrated to pjsip.conf. A previous change regarding this contained a copy/paste error. ASTERISK-22374 Change-Id: I0fa72e9412117d53b4284fc6b83fa5b2b95ba03b	9 years ago
Joshua Colp	5d4ce33e8c	Merge "sip_to_pjsip: Write cos and tos." into 13	9 years ago
Kevin Harwell	cab6975b02	sip_to_pjsip: Set correct tls transport method ... A recent update had a copy/paste error where the unused variable 'val' was being passed to the set_value function instead of the 'method' value itself. This patch passes in the right variable. ASTERISK-22374 Change-Id: I895b7b3779ce4442bc58b8ec40d59dd29bb43f06	9 years ago
Joshua Colp	43254c2db7	Merge "sip_to_pjsip: Parse register even with transport." into 13	9 years ago
Joshua Colp	e3d72c7aee	Merge "sip_to_pjsip: Write local_net, contact_acl, contact_deny, and contact_permit." into 13	9 years ago
Joshua Colp	e1ef9e697e	Merge "sip_to_pjsip: Map (session-)timers correctly." into 13	9 years ago
Joshua Colp	f5165fd0aa	Merge "sip_to_pjsip: Add cert_file and ca_list_path." into 13	9 years ago