build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Remove the AST_FORMAT_MAX_* types, as these are consuming 3 out of our available 32 bits.
- Add a native slin16 type, so that 16kHz codecs can translate without losing resolution.
(This doesn't affect anything immediately, until another codec has wb support.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89071 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also fixes a few cli messages and some minor formatting.
(closes issue #11001)
Reported by: seanbright
Patches:
newcli.1.patch uploaded by seanbright (license 71)
newcli.2.patch uploaded by seanbright (license 71)
newcli.4.patch uploaded by seanbright (license 71)
newcli.5.patch uploaded by seanbright (license 71)
newcli.6.patch uploaded by seanbright (license 71)
newcli.7.patch uploaded by seanbright (license 71)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@86534 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r83432 | russell | 2007-09-21 09:37:20 -0500 (Fri, 21 Sep 2007) | 4 lines
gcc 4.2 has a new set of warnings dealing with cosnt pointers. This set of
changes gets all of Asterisk (minus chan_alsa for now) to compile with gcc 4.2.
(closes issue #10774, patch from qwell)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@83433 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r79174 | file | 2007-08-13 11:18:04 -0300 (Mon, 13 Aug 2007) | 4 lines
(closes issue #10437)
Reported by: haklin
Don't set the callerid name and number a second time on a newly created channel. ast_channel_alloc itself already sets it and setting it twice would cause a memory leak.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79175 65c4cc65-6c06-0410-ace0-fbb531ad65f3
places in the code where the same block of code for creating detached threads
was replicated. (patch from bbryant)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@65968 65c4cc65-6c06-0410-ace0-fbb531ad65f3
external libraries and URLs to these. Please help me add these
references.
We might want to create a similar macro "\linuxpackage" to list
the needed Linux packages in popular distributions.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@56647 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r51311 | russell | 2007-01-19 11:49:38 -0600 (Fri, 19 Jan 2007) | 23 lines
Merge the changes from the /team/group/vldtmf_fixup branch.
The main bug being addressed here is a problem introduced when two SIP
channels using SIP INFO dtmf have their media directly bridged. So, when a
DTMF END frame comes into Asterisk from an incoming INFO message, Asterisk
would try to emulate a digit of some length by first sending a DTMF BEGIN
frame and sending a DTMF END later timed off of incoming audio. However,
since there was no audio coming in, the DTMF_END was never generated. This
caused DTMF based features to no longer work.
To fix this, the core now knows when a channel doesn't care about DTMF BEGIN
frames (such as a SIP channel sending INFO dtmf). If this is the case, then
Asterisk will not emulate a digit of some length, and will instead just pass
through the single DTMF END event.
Channel drivers also now get passed the length of the digit to their digit_end
callback. This improves SIP INFO support even further by enabling us to put
the real digit duration in the INFO message instead of a hard coded 250ms.
Also, for an incoming INFO message, the duration is read from the frame and
passed into the core instead of just getting ignored.
(issue #8597, maybe others...)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r44378 | kpfleming | 2006-10-04 14:47:22 -0500 (Wed, 04 Oct 2006) | 4 lines
update thread creation code a bit
reduce standard thread stack size slightly to allow the pthreads library to allocate the stack+data and not overflow a power-of-2 allocation in the kernel and waste memory/address space
add a new stack size for 'background' threads (those that don't handle PBX calls) when LOW_MEMORY is defined
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@44379 65c4cc65-6c06-0410-ace0-fbb531ad65f3
now reports AST_MODULE_LOAD_DECLINE when loading if config file
is not there, also fixed an error in res_config_pgsql where it
had a non static function when it should.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@41633 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- restructured build tree and makefiles to eliminate recursion problems
- support for embedded modules
- support for static builds
- simpler cross-compilation support
- simpler module/loader interface (no exported symbols)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@40722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
channel to remove the theoretical race condition that the channel could get
bridged before the channel's jitterbuffer gets configured. This was pointed
out by PCadach on IRC. Thanks!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@39964 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r38903 | russell | 2006-08-05 01:07:39 -0400 (Sat, 05 Aug 2006) | 2 lines
suppress a compiler warning about the usage of a potentially uninitialized variable
........
r38904 | russell | 2006-08-05 01:08:50 -0400 (Sat, 05 Aug 2006) | 10 lines
Fix an issue that would cause a NewCallerID manager event to be generated
before the channel's NewChannel event. This was due to a somewhat recent
change that included using ast_set_callerid() where it wasn't before. This
function should not be used in the channel driver "new" functions.
(issue #7654, fixed by me)
Also, fix a couple minor bugs in usecount handling. chan_iax2 could have
increased the usecount but then returned an error. The place where chan_sip
increased the usecount did not call ast_update_usecount()
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@38905 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r36725 | russell | 2006-07-03 00:19:09 -0400 (Mon, 03 Jul 2006) | 4 lines
use ast_set_callerid to be more consistent and to make sure that the
"callerid" option in the conf files is always handled the same way and sets ANI
(issue #7285, gkloepfer)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36726 65c4cc65-6c06-0410-ace0-fbb531ad65f3
allocated. These changes caused crashes when using a channel type that did
not support the jitterbuffer. Instead of fixing why it's crashing, I'm going
to implement this in a better way next week. The way I did it caused a
jitterbuffer to be allocated on every channel where the channel type supported
jitterbuffers, even if they were disabled.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@35746 65c4cc65-6c06-0410-ace0-fbb531ad65f3
so that channels not using a jitterbuffer don't waste as much memory
- ensure that the channel drivers that use jitterbuffers can handle a failure
from configuring a jitterbuffer on a new channel because of a memory
allocation error
- On passing through these channel drivers, configure the jitterbuffer before
starting the PBX thread instead of afterwards. If the pbx fails to start for
whatever reason, this would have caused a crash.
- Also on passing, move the increase of the usecount to after all of the
possible failure conditions in the function
- fix a place where ast_update_use_count() was not called
- ensure that the owner channel pointer of the channel pvt strcutures is set to
NULL in failure conditions
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@35553 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and mgcp channels
- remove the jitterbuffer configuration from the pvt structures in
the sip, zap, and skinny channel drivers, as copying the same global
configuration into each pvt structure has no benefit.
- update and fix some typos in jitterbuffer related documentation
(issue #7257, north, with additional updates and modifications)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@31413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
also allows for it to compile once more patch
taken from 6446 with minor mods, similar bugs 6521
and 6560
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@17104 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Luigi Rizzo
Joshua Colp
Tilghman Lesher
Jason Parker
Russell Bryant
Steve Murphy
Olle Johansson
Paul Cadach
Kevin P. Fleming
Matthew Fredrickson
Matt O'Gorman
Jeremy McNamara