91 Commits (9e549d533a24211ea7c0d6a5389af404423b823e)

Author	SHA1	Message	Date
Kent	ef66694b7b	res_pjsip: Add new AOR option "qualify_2xx_only" ... Added a new option "qualify_2xx_only" to the res_pjsip AOR qualify feature to mark a contact as available only if an OPTIONS request returns a 2XX response. If the option is not specified or is false, any response to the OPTIONS request marks the contact as available. UserNote: The pjsip.conf AOR section now has a "qualify_2xx_only" option that can be set so that only 2XX responses to OPTIONS requests used to qualify a contact will mark the contact as available. (cherry picked from commit 0b30f546ba)	9 months ago
Maximilian Fridrich	0d2e140123	res_pjsip: Add mediasec capabilities. ... This patch adds support for mediasec SIP headers and SDP attributes. These are defined in RFC 3329, 3GPP TS 24.229 and draft-dawes-sipcore-mediasec-parameter. The new features are implemented so that a backbone for RFC 3329 is present to streamline future work on RFC 3329. With this patch, Asterisk can communicate with Deutsche Telekom trunks which require these fields. ASTERISK-30032 Change-Id: Ia7f5b5ba42db18074fdd5428c4e1838728586be2	3 years ago
Ben Ford	881a3f2306	res_pjsip: Add TEL URI support for basic calls. ... This change allows TEL URI requests to come through for basic calls. The allowed requests are INVITE, ACK, BYE, and CANCEL. The From and To headers will now allow TEL URIs, as well as the request URI. Support is only for TEL URIs present in traffic from a remote party. Asterisk does not generate any TEL URIs on its own. ASTERISK-26894 Change-Id: If5729e6cd583be7acf666373bf9f1b9d653ec29a	3 years ago
Naveen Albert	c654486547	general: Improve logging levels of some log messages. ... Adjusts some logging levels to be more or less important, that is more prominent when actual problems occur and less prominent for less noteworthy things. ASTERISK-30153 #close Change-Id: Ifc8f7df427aa018627db462125ae744986d3261b	3 years ago
Philip Prindeville	287a1a9126	time: add support for time64 libcs ... Treat time_t's as entirely unique and use the POSIX API's for converting to/from strings. Lastly, a 64-bit integer formats as 20 digits at most in base10. Don't need to have any 100 byte buffers to hold that. ASTERISK-29674 #close Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Change-Id: Id7b25bdca8f92e34229f6454f6c3e500f2cd6f56	4 years ago
Alexander Greiner-Baer	fba10fb54c	res_pjsip: set Accept-Encoding to identity in OPTIONS response ... RFC 3261 says that the Accept-Encoding header should be present in an options response. Permitted values according to RFC 2616 are only compression algorithms like gzip or the default identity encoding. Therefore "text/plain" is not a correct value here. As long as the header is hard coded, it should be set to "identity". Without this fix an Alcatel OmniPCX periodically logs warnings like "[sip_acceptIncorrectHeader] Header Accept-Encoding is malformed" on a SIP Trunk. ASTERISK-29165 #close Change-Id: I0aa2211ebf0b4c2ed554ac7cda794523803a3840	5 years ago
Joshua C. Colp	d845464c76	res_pjsip: Don't set endpoint to unavailable in all cases. ... When an AOR is modified endpoints are updated that reference the AOR so they can start receiving updates and reflect the correct state. If this is the case then we shouldn't change the endpoint to be offline if it does not reference the AOR but instead only when the endpoint is completely updated for all its AORs. ASTERISK-28056 patches: pjsip_options-aor.diff submitted by jhord (license 6978) Change-Id: I3ee00023be2393113cd4e056599f23f3499ef164	6 years ago
Ben Ford	86836e0442	pjsip_options.c: Allow immediate qualifies for new contacts. ... When multiple endpoints try to register close together using the same AOR with qualify_frequency set, one contact would qualify immediately while the other contacts would have to wait out the duration of the timer before being able to qualify. Changing the conditional to check the contact container count for a non-zero value allows all contacts to qualify immediately. Change-Id: I79478118ee7e0d6e76af7c354d66684220db9415	7 years ago
Alexei Gradinari	f0546d1d87	res_pjsip: add option to enable ContactStatus event when contact is updated ... The commit I2f97ebfa79969a36a97bb7b9afd5b6268cf1a07d removed sending out the ContactStatus AMI event when a contact is updated. Thist change broke things which rely on old behavior. This patch adds a new PJSIP global configuration option 'send_contact_status_on_update_registration' to be able to preserve old ContactStatus behavior. By default new behavior, i.e. the ContactStatus event will not be sent when a device refreshes its registration. Change-Id: I706adf7584e7077eb6bde6d9799ca408bc82ce46	7 years ago
Joshua Colp	5320b18bfe	Merge "res_pjsip: Reduce processing when a Contact is updated."	7 years ago
Joshua Colp	457ba355aa	res_pjsip: Reduce processing when a Contact is updated. ... When a Contact is updated the only material change that qualify support cares about is the underlying configuration for the AOR. In this case we will update things with the new AOR information but otherwise the callback to indicate the Contact has changed can be ignored. This is because it is only when a Contact is added or deleted that material changes occur within the qualify support. An update can't change the URI since it would result in a new Contact so it can be ignored. Change-Id: I2f97ebfa79969a36a97bb7b9afd5b6268cf1a07d	7 years ago
Corey Farrell	52fe5fe2c8	res_pjsip: Fix leak in pjsip_options. ... sip_options_get_endpoint_state_compositor_state leaked a reference to the first available endpoint state compositor that was found. Change-Id: Idb6be19f7219b6eed1dfb19c1e740dd40cb3fdc7	7 years ago
Richard Mudgett	cad50d6dbf	VECTOR: Passing parameters with side effects to macros is dangerous. ... * Fix several instances where we were bumping a ref in the parameter and then unrefing the object if it failed. The way the AST_VECTOR_APPEND() and AST_VECTOR_REPLACE() macros are implemented means if it fails the new value was never evaluated. Change-Id: I2847872a455b11ea7e5b7ce697c0a455a1d0ac9a	7 years ago
George Joseph	7b5fc5d20f	Merge "pjsip_options: handle modification of qualify options in realtime"	8 years ago
Alexei Gradinari	7af5e86821	pjsip_options: show/reload AOR qualify options using CLI ... Currentrly pjsip_options code does not handle the situation when the AOR qualify options were changed. Also there is no way to find out what qualify options are using. This patch add CLI commands to show and synchronize Aor qualify options: pjsip show qualify endpoint <id> Show the current qualify options for all Aors on the PJSIP endpoint. pjsip show qualify aor <id> Show the PJSIP Aor current qualify options. pjsip reload qualify endpoint <id> Synchronize the qualify options for all Aors on the PJSIP endpoint. pjsip reload qualify aor <id> Synchronize the PJSIP Aor qualify options. ASTERISK-27872 Change-Id: I1746d10ef2b7954f2293f2e606cdd7428068c38c	8 years ago
Alexei Gradinari	e46b442e38	pjsip_options: handle modification of qualify options in realtime ... Currentrly pjsip_options code does not handle the situation when the qualify options were changed in realtime database. Only 'module reload res_pjsip' helps. This patch add a check on contact add/update observers if the contact qualify options are different than local aor qualify options. If the qualify options were modified then synchronize the pjsip_options AOR local state. ASTERISK-27872 Change-Id: Id55210a18e62ed5d35a88e408d5fe84a3c513c62	8 years ago
Joshua Colp	882e79b77e	pjsip: Rewrite OPTIONS support with new eyes. ... The OPTIONS support in PJSIP has organically grown, like many things in Asterisk. It has been tweaked, changed, and adapted based on situations run into. Unfortunately this has taken its toll. Configuration file based objects have poor performance and even dynamic ones aren't that great. This change scraps the existing code and starts fresh with new eyes. It leverages all of the APIs made available such as sorcery observers and serializers to provide a better implementation. 1. The state of contacts, AORs, and endpoints relevant to the qualify process is maintained. This state can be updated by external forces (such as a device registering/unregistering) and also the reload process. This state also includes the association between endpoints and AORs. 2. AORs are scheduled and not contacts. This reduces the amount of work spent juggling scheduled items. 3. Manipulation of which AORs are being qualified and the endpoint states all occur within a serializer to reduce the conflict that can occur with multiple threads attempting to modify things. 4. Operations regarding an AOR use a serializer specific to that AOR. 5. AORs and endpoint state act as state compositors. They take input from lower level objects (contacts feed AORs, AORs feed endpoint state) and determine if a sufficient enough change has occurred to be fed further up the chain. 6. Realtime is supported by using observers to know when a contact has been registered. If state does not exist for the associated AOR then it is retrieved and becomes active as appropriate. The end result of all of this is best shown with a configuration file of 3000 endpoints each with an AOR that has a static contact. In the old code it would take over a minute to load and use all 8 of my cores. This new code takes 2-3 seconds and barely touches the CPU even while dealing with all of the OPTIONS requests. ASTERISK-26806 Change-Id: I6a5ebbfca9001dfe933eaeac4d3babd8d2e6f082	8 years ago
Corey Farrell	527cf5a570	Remove redundant module checks and references. ... This removes references that are no longer needed due to automatic references created by module dependencies. In addition this removes most calls to ast_module_check as they were checking modules which are listed as dependencies. Change-Id: I332a6e8383d4c72c8e89d988a184ab8320c4872e	8 years ago
Sungtae Kim	5b8e71ab9f	res_pjsip: Add AMI action 'PJSIPShowContacts' ... Add an AMI action which provides information on all configured Contacts. ASTERISK-27581 Change-Id: I2eed42c74bbc725fad26b8b33b1a5b3161950c73	8 years ago
Sean Bright	fd0ca1c3f9	Remove as much trailing whitespace as possible. ... Change-Id: I873c1c6d00f447269bd841494459efccdd2c19c0	8 years ago
Jenkins2	dff0415b1e	Merge "pjsip_options: wrongly applied "UNKNOWN" status"	8 years ago
Kevin Harwell	30954337a0	Merge "pjsip_options: contacts sometimes not being updated on reload"	8 years ago
Kevin Harwell	b088cddc03	pjsip_options: wrongly applied "UNKNOWN" status ... A couple of places were setting the status to "UNKNOWN" when qualifies were being disabled. Instead this should be set to the "CREATED" status that represents when a contact is given (uri available), but the qualify frequency is set to zero so we don't know the status. This patch updates the relevant places with "CREATED". It also updates the "CREATED" status description (value shown in CLI/AMI/ARI output) to a value of "NonQualified"/"NonQual" as this description is hopefully less confusing. ASTERISK-27467 Change-Id: Id67509d25df92a72eb3683720ad2a95a27b50c89	8 years ago
Kevin Harwell	0e4d31eb9c	pjsip_options: contacts sometimes not being updated on reload ... For both dynamic and static contacts it was possible that potential AOR changes were not being applied to all contacts. This was because the qualify and schedule code was only retrieving AOR's, and contacts with frequencies greater than zero. For instance the following could happen: and AOR/contact has a frequency of 5, it then gets set to 0, and then a reload occurs. All scheduled OPTIONS are stopped, a list of AOR's is retrieved with frequency > 0, but none are selected since in this scenario all are 0. The contact for the one previously set to 5 though does not get updated, so it's status remains "AVAILABLE". This patch makes it so all contacts (static and dynamic) are selected, and appropriately updated if need be. ASTERISK-27467 #close Change-Id: I7a920170f89c683af9505d4723a44fc6841decdb	8 years ago
Kevin Harwell	bd2218ce63	pjsip_options: dynamic contact's fields not updated on reload ... Dynamic contacts were not being properly updated on reload. As a matter of fact any changes to the AOR that a dynamic contact was associated with were not being applied. On reload, this patch makes it so for each dynamic contact, the associated AOR is now retrieved and the AOR's fields are applied to the contact. ASTERISK-27467 Change-Id: I8e3165dc6a745218c1c9db837f77fafa0516985d	8 years ago
Jørgen H	ee0a123f43	res_pjsip: Fix crash when contact has no status ... This change fixes an assumption in res_pjsip that a contact will always have a status. There is a race condition where this is not true and would crash. The status will now be unknown when this situation occurs. ASTERISK-26623 #close Change-Id: Id52d3ca4d788562d236da49990a319118f8d22b5	9 years ago
Mark Michelson	46147a8f30	Revert "Update qualifies when AOR configuration changes." ... This reverts commit 6492e91392. The change in question was intended to prevent the need to reload in order to update qualifies on contacts when an AOR changes. However, this ended up causing a deadlock instead. Change-Id: I1a835c90a5bb65b6dc3a1e94cddc12a4afc3d71e	9 years ago
Mark Michelson	bbed75c3ba	Update qualifies when AOR configuration changes. ... Prior to this change, qualifies would only update in the following cases: * A reload of res_pjsip.so was issued. * A dynamic contact was re-registered after its AOR's qualify_frequency had been changed This does not work well if you are using realtime for your AORs. You can update your database to have a new qualify_frequency, but the permanent contacts on that AOR will not have their qualifies updated. And the dynamic contacts on that AOR will not have their qualifies updated until the next registration, which could be a long time. This change seeks to fix this problem by making it so that whenever AOR configuration is applied, the contacts pertaining to that AOR have their qualifies updated. Additions from this patch: * AOR sorcery objects now have an apply handler that calls into a newly added function in the OPTIONS code. This causes all contacts associated with that AOR to re-schedule qualifies. * When it is time to qualify a contact, the OPTIONS code checks to see if the AOR can still be retrieved. If not, then qualification is canceled on the contact. Alterations from this patch: * The registrar code no longer updates contact's qualify_frequence and qualify_timeout. There is no point to this since those values already get updated when the AOR changes. * Reloading res_pjsip.so no longer calls the OPTIONS initialization function. Reloading res_pjsip.so results in re-loading AORs, which results in re-scheduling qualifies. Change-Id: I2e7c3316da28f389c45954f24c4e9389abac1121	9 years ago
Joshua Colp	3fcc35c66c	Merge "res_pjsip: Fix 'A = B != C' kind."	9 years ago
Badalyan Vyacheslav	934aa2c768	res_pjsip: Fix 'A = B != C' kind. ... Consider reviewing the expression of the 'A = B != C' kind. The expression is calculated as following: 'A = (B != C)' Change-Id: Ibaa637dfda47d51a20e26069d3103e05ce80003d	9 years ago
George Joseph	79b09b5f18	res_pjsip_registrar: AMI Add RegistrationInboundContactStatuses command ... The PJSIPShowRegistrationsInbound AMI command was just dumping out all AORs which was pretty useless and resource heavy since it had to get all endpoints, then all aors for each endpoint, then all contacts for each aor. PJSIPShowRegistrationInboundContactStatuses sends ContactStatusDetail events which meets the intended purpose of the other command and has significantly less overhead. Also, some additional fields that were added to Contact since the original creation of the ContactStatusDetail event have been added to the end of the event. For compatibility purposes, PJSIPShowRegistrationsInbound is left intact. ASTERISK-26644 #close Change-Id: I326f12c9ecb52bf37ba03f0748749de4da01490a	9 years ago
Richard Mudgett	ba362822f3	res_pjsip: Add ignore_uri_user_options option. ... This implements the chan_sip legacy_useroption_parsing option but with a better name. * Made the caller-id number and redirecting number strings obtained from incoming SIP URI user fields always truncated at the first semicolon. People don't care about anything after the semicolon showing up on their displays even though the RFC allows the semicolon. ASTERISK-26316 #close Reported by: Kevin Harwell Change-Id: Ib42b0e940dd34d84c7b14bc2e90d1ba392624f62	9 years ago
Alexei Gradinari	faf9bdebb7	res_pjsip: qualify/unqualify added/deleted realtime endpoints ... If the PJSIP endpoint's AOR with the permanent contact was deleted from the realtime storage the res_pjsip module continues trying to qualify this contact. The error 'Unable to find an endpoint to qualify contact' appeares every 'qualify_frequency' seconds. This patch deletes this contact in this case. The PJSIP endpoint's AOR with the permanent contact is never qualified if it is added to realtime storage after asterisk started. This patch adds qualifying for the AOR's permanent contacts on the first handling of this AOR. ASTERISK-26319 #close Change-Id: Ib93dded9121edb113076903d1aa95402f799f8fe	9 years ago
Richard Mudgett	bc1ff41be7	pjsip_options.c: Fix container operation. ... aor_observer_deleted() needs to operate on all contacts found for the deleted AOR instead of only the first one found. This is really only a problem if there is more than one contact for the AOR. Change-Id: Id24ac0d5e8c931330231fb45dd2a331a84339dc1	9 years ago
Richard Mudgett	b85446d039	res_pjsip: Fix statsd regression. ... The ASTERISK-25904 change-id I8fad8aae9305481469c38d2146e1ba3a56d3108f patch introduced several regressions when the newly created "Updated" state goes out for each endpoint registration refresh. 1) It restarted any OPTIONS RTT ping cycle. 2) It would interfere with a currently active ping and throw off that ping's resulting RTT calculation. 3) It cleared the RTT time each time the endpoint was refreshed. 4) The cleared RTT time was sent out as a statsd update each time. 5) It created two AMI events for each update. * Revert the original patch and reimplement it. Now the current contact status state is re-sent instead of the state being momentarily toggled every time the endpoint refreshes its registration. The statsd events are not created for the re-sent refresh because they are sent after every OPTIONS ping. ASTERISK-26160 #close Reported by: Matt Jordan Change-Id: Ie072be790fbb2a8f5c1c874266e4143fa31f66d1	9 years ago
Alexei Gradinari	6fa3ed0679	res_pjsip: improve realtime performance #2 ... The patch removes updating all Endpoints' status on startup. Instead, only non-qualified aors with static contact and non-qualified non-expired contacts are retrieved from the realtime to update the endpoint status to ONLINE. The endpoint name was added to the contact object to simply find the endpoint that created this contact. The status of endpoints with qualified aors will be updated by 'qualify' functions. ASTERISK-26061 #close Change-Id: Id324c1776fa55d3741e0c5457ecac0304cb1a0df	9 years ago
Richard Mudgett	4879cd875c	sorcery: Add setting object type congestion levels. ... Sorcery creates taskprocessors for object types to process object observer callbacks. An API call is needed to be able to set the congestion levels of these taskprocessors for selected object types. * Updated PJSIP's contact and contact_status sorcery object type observer default congestion levels based upon stress testing. Increased the congestion levels to reduce the potential for bursty register/unregister and subscribe/unsubscribe activity from triggering the taskprocessor overload alert. ASTERISK-26088 Reported by: Richard Mudgett Change-Id: I4542e83b556f0714009bfeff89505c801f1218c6	10 years ago
Alexei Gradinari	31f17abe44	res_pjsip: add "via_addr", "via_port", "call_id" to contact ... As res_pjsip_nat rewrites contact's address, only the last Via header can contain the source address of registered endpoint. Also Call-Id header may contain the source address of registered endpoint. Added "via_addr", "via_port", "call_id" to contact. Added new fields ViaAddress, CallID to AMI event ContactStatus. ASTERISK-26011 Change-Id: I36bcc0bf422b3e0623680152d80486aeafe4c576	10 years ago
Alexei Gradinari	cc4c5f5693	res_pjsip: improve realtime performance ... This patch modified pjsip_options to retrieve only permament contacts for aor if the qualify_frequency is > 0 and persisted contacts if the qualify_frequency is > 0. This patch also fixed a bug in res_sorcery_astdb. res_sorcery_astdb doesn't save object data retrived from astdb. ASTERISK-25826 Change-Id: I1831fa46c4578eae5a3e574ee3362fddf08a1f05	10 years ago
Alexei Gradinari	a4cfcda036	res_pjsip/AMI: add contact.updated event ... With the old SIP module AMI sends PeerStatus event on every successfully REGISTER requests, ie, on start registration, update registration and stop registration. With PJSIP AMI sends ContactStatus only when status is changed. Regarding registration: on start registration - Created on stop registration - Removed but on update registration nothing This patch added contact.updated event. ASTERISK-25904 Change-Id: I8fad8aae9305481469c38d2146e1ba3a56d3108f	10 years ago
Alexei Gradinari	49813bc9e5	res_pjsip: Add headers to AMI Event ContactStatusDetail ... * Added Useragent and RegExpire headers to AMI Event ContactStatusDetail with associated documentation. ASTERISK-25903 #close Change-Id: If3d121e943e588d016ba51d4eb9c6a421a562239	10 years ago
zuul	23d2a561d5	Merge "res_pjsip/pjsip_options: Fix From generation on outgoing OPTIONS"	10 years ago
George Joseph	c971a64366	res_pjsip/pjsip_options: Fix From generation on outgoing OPTIONS ... No one seemed to notice but every time an OPTIONS goes out, it goes out with a From of "asterisk" (or whatever the default from_user is set to), even if you specify an endpoint. The issue had several causes... qualify_contact is only called with an endpoint if called from the CLI. If the endpoint is NULL, qualify_contact only looks up the endpoint if authenticate_qualify=yes. Even then, it never passes it on to ast_sip_create_request where the From header is set. Therefore From is always "asterisk" (or whatever the default from_user is set to). Even if ast_sip_create_request were to get an endpoint, it only sets the From if endpoint->from_user is set. The fix is 4 parts... First, create_out_of_dialog_request was modified to use the endpoint id if endpoint was specified and from_user is not set. Second, qualify_contact was modified to always look up an endpoint if one wasn't specified regardless of authenticate_qualify. It then passes the endpoint on to create_out_of_dialog_request. Third (and most importantly), find_an_endpoint was modified to find an endpoint by using an "aors LIKE %contact->aor%" predicate with ast_sorcery_retrieve_by_fields. As such, this patch will only work if the sorcery realtime optimizations patch goes in. Otherwise we'd be pulling the entire endpoints database every time we send an OPTIONS. Since we already know the contact's aor, the on_endpoint callback was also modified to just check if the contact->aor is an exact match to one of the endpoint's. Finally, since we now have an endpoint for every OPTIONS request, res_pjsip/endpt_send_request (which handles out-of-dialog reqests) was updated to get the transport from the endpoint and set it on tdata. Now the correct transport is used. Change-Id: I2207e12bb435e373bd1e03ad091d82e5aba011af	10 years ago
George Joseph	c948ce9651	sorcery/res_pjsip: Refactor for realtime performance ... There were a number of places in the res_pjsip stack that were getting all endpoints or all aors, and then filtering them locally. A good example is pjsip_options which, on startup, retrieves all endpoints, then the aors for those endpoints, then tests the aors to see if the qualify_frequency is > 0. One issue was that it never did anything with the endpoints other than retrieve the aors so we probably could have skipped a step and just retrieved all aors. But nevermind. This worked reasonably well with local config files but with a realtime backend and thousands of objects, this was a nightmare. The issue really boiled down to the fact that while realtime supports predicates that are passed to the database engine, the non-realtime sorcery backends didn't. They do now. The realtime engines have a scheme for doing simple comparisons. They take in an ast_variable (or list) for matching, and the name of each variable can contain an operator. For instance, a name of "qualify_frequency >" and a value of "0" would create a SQL predicate that looks like "where qualify_frequency > '0'". If there's no operator after the name, the engines add an '=' so a simple name of "qualify_frequency" and a value of "10" would return exact matches. The non-realtime backends decide whether to include an object in a result set by calling ast_sorcery_changeset_create on every object in the internal container. However, ast_sorcery_changeset_create only does exact string matches though so a name of "qualify_frequency >" and a value of "0" returns nothing because the literal "qualify_frequency >" doesn't match any name in the objset set. So, the real task was to create a generic string matcher that can take a left value, operator and a right value and perform the match. To that end, strings.c has a new ast_strings_match(left, operator, right) function. Left and right are the strings to operate on and the operator can be a string containing any of the following: = (or NULL or ""), !=, >, >=, <, <=, like or regex. If the operator is like or regex, the right string should be a %-pattern or a regex expression. If both left and right can be converted to float, then a numeric comparison is performed, otherwise a string comparison is performed. To use this new function on ast_variables, 2 new functions were added to config.c. One that compares 2 ast_variables, and one that compares 2 ast_variable lists. The former is useful when you want to compare 2 ast_variables that happen to be in a list but don't want to traverse the list. The latter will traverse the right list and return true if all the variables in it match the left list. Now, the backends' fields_cmp functions call ast_variable_lists_match instead of ast_sorcery_changeset_create and they can now process the same syntax as the realtime engines. The realtime backend just passes the variable list unaltered to the engine. The only gotcha is that there's no common realtime engine support for regex so that's been noted in the api docs for ast_sorcery_retrieve_by_fields. Only one more change to sorcery was done... A new config flag "allow_unqualified_fetch" was added to reg_sorcery_realtime. "no": ignore fetches if no predicate fields were supplied. "error": same as no but emit an error. (good for testing) "yes": allow (the default); "warn": allow but emit a warning. (good for testing) Now on to res_pjsip... pjsip_options was modified to retrieve aors with qualify_frequency > 0 rather than all endpoints then all aors. Not only was this a big improvement in realtime retrieval but even for config files there's an improvement because we're not going through endpoints anymore. res_pjsip_mwi was modified to retieve only endpoints with something in the mailboxes field instead of all endpoints then testing mailboxes. res_pjsip_registrar_expire was completely refactored. It was retrieving all contacts then setting up scheduler entries to check for expiration. Now, it's a single thread (like keepalive) that periodically retrieves only contacts whose expiration time is < now and deletes them. A new contact_expiration_check_interval was added to global with a default of 30 seconds. Ross Beer reports that with this patch, his Asterisk startup time dropped from around an hour to under 30 seconds. There are still objects that can't be filtered at the database like identifies, transports, and registrations. These are not going to be anywhere near as numerous as endpoints, aors, auths, contacts however. Back to allow_unqualified_fetch. If this is set to yes and you have a very large number of objects in the database, the pjsip CLI commands will attempt to retrive ALL of them if not qualified with a LIKE. Worse, if you type "pjsip show endpoint <tab>" guess what's going to happen? :) Having a cache helps but all the objects will have to be retrieved at least once to fill the cache. Setting allow_unqualified_fetch=no prevents the mass retrieve and should be used on endpoints, auths, aors, and contacts. It should NOT be used for identifies, registrations and transports since these MUST be retrieved in bulk. Example sorcery.conf: [res_pjsip] endpoint=config,pjsip.conf,criteria=type=endpoint endpoint=realtime,ps_endpoints,allow_unqualified_fetch=error ASTERISK-25826 #close Reported-by: Ross Beer Tested-by: Ross Beer Change-Id: Id2691e447db90892890036e663aaf907b2dc1c67	10 years ago
Gianluca Merlo	894071ea2c	config: fix flags in uint option handler ... The configuration unsigned integer option handler sets flags for the parser as if the option should be a signed integer (PARSE_INT32), leading to errors on "out of range" values. Fix flags (PARSE_UINT32). A fix to res_pjsip is also present which stops invalid flags from being passed when registering sorcery object fields for qualify status. ASTERISK-25612 #close Change-Id: I96b539336275e0e72a8e8033487d2c3344debd3e	10 years ago
George Joseph	d2eb65f71e	res_pjsip: Strip spaces from items parsed from comma-separated lists ... Configurations like "aors = a, b, c" were either ignoring everything after "a" or trying to look up " b". Same for mailboxes, ciphers, contacts and a few others. To fix, all the strsep(&copy, ",") calls have been wrapped in ast_strip. To facilitate this, ast_strip, ast_skip_blanks and ast_skip_nonblanks were updated to handle null pointers. In some cases, an ast_strlen_zero() test was added to skip consecutive commas. There was also an attempt to ast_free an ast_strdupa'd string in ast_sip_for_each_aor which was causing a SEGV. I removed it. Although this issue was reported for realtime, the issue was in the res_pjsip modules so all config mechanisms were affected. ASTERISK-25829 #close Reported-by: Mateusz Kowalski Change-Id: I0b22a2cf22a7c1c50d4ecacbfa540155bec0e7a2	10 years ago
Mark Michelson	13b6c02945	Fix creation race of contact_status structures. ... It is possible when processing a SIP REGISTER request to have two threads end up creating contact_status structures in sorcery. contact_status is created using a "find or create" function. If two threads call into this at the same time, each thread will fail to find an existing contact_status, and so both will end up creating a new contact status. During testing, we would see sporadic failures because the PJSIP_CONTACT() dialplan function would operate on a different contact_status than what had been updated by res_pjsip/pjsip_options. The fix here is two-fold: 1) The "find or create" function for contact_status now has a lock around the entire operation. This way, if two threads attempt the operation simultaneously, the first to get there will create the object, and the second will find the object created by the first thread. 2) res_sorcery_memory has had its create callback updated so that it will not allow for objects with duplicate IDs to be created. Change-Id: I55b1460ff1eb0af0a3697b82d7c2bac9f6af5b97	10 years ago
George Joseph	4be231e82f	res_pjsip/contacts/statsd: Make contact lifecycle events more consistent ... It will never be perfect or even pretty, mostly because of the differences between static and dynamic contacts. Created: Can't use the contact or contact_status alloc functions because the objects come and go regardless of the actual state. Can't use the contact_apply_handler, ast_sip_location_add_contact or a sorcery created handler because they only get called for dynamic contacts. Similarly, permanent_uri_handler only gets called for static contacts. So, Matt had it right. :) ast_res_pjsip_find_or_create_contact_status is the only place it can go and not have duplicated code. Both permanent_uri_handler and contact_apply_handler call find_or_create. Removed: Can't use the destructors for the same reason as above. The only place to put this is in persistent_endpoint_contact_deleted_observer which I believe is the "correct" place but even that will handle only dynamic contacts. This doesn't called on shutdown however. There is no hook to use for static contacts that may be removed because of a config change while asterisk is in operation. I moved the cleanup of contact_status from ast_sip_location_delete_contact to the handler as well. Status Change and RTT: Although they worked fine where they were (in update_contact_status) I moved them to persistent_endpoint_contact_status_observer to make it more consistent with removed. There was logic there already to detect a state change. Finally, fixed a nit in permanent_uri_handler rmudgett reported eralier. ASTERISK-25608 #close Change-Id: I4b56e7dfc3be3baaaf6f1eac5b2068a0b79e357d Reported-by: George Joseph Tested-by: George Joseph	10 years ago
George Joseph	bd265a90be	res_pjsip: Update logging to show contact->uri in messages ... An earlier commit changed the id of dynamic contacts to contain a hash instead of the uri. This patch updates status change logging to show the aor/uri instead of the id. This required adding the aor id to contact and contact_status and adding uri to contact_status. The aor id gets added to contact and contact_status in their allocators and the uri gets added to contact_status in pjsip_options when the contact_status is created or updated. ASTERISK-25598 #close Reported-by: George Joseph Tested-by: George Joseph Change-Id: I56cbec1d2ddbe8461367dd8b6da8a6f47f6fe511	10 years ago
David M. Lee	91346b9fb7	Fixed some typos ... Fixes some minor typos in the CHANGES file, plus an embarrasing typo in the StatsD API. Change-Id: I9ca4858c64a4a07d2643b81baa64baebb27a4eb7	10 years ago