When the identify_by option on an endpoint is set to ip it will
only be identified using the res_pjsip_endpoint_identifier_ip module.
This ensures that it is not mistakenly matched using the username of
the From header. To ensure behavior has not changed the default has
been changed to "username,ip" for the identify_by option.
ASTERISK-27206
Change-Id: I2170b86a7f7e221b4f00bf14aa1ef1ac5b050bbd
ast_sip_add_usereqphone adds "user=phone" to the header every time is is
called without checking whether the param already exists. Preventing
this by searching to string representation of header for "user=phone".
ASTERISK-26988 #close
Change-Id: Ib84383b07254de357dc6a98d91fc1d2c2c3719e6
When "rewrite_contact" is enabled, the "max_contacts" count option can
block re-registrations because the source port from the endpoint can be
random. When the re-registration is blocked, the endpoint may give up
re-registering and require manual intervention.
* The "remove_existing" option now allows a registration to succeed by
displacing any existing contacts that now exceed the "max_contacts" count.
Any removed contacts are the next to expire. The behaviour change is
beneficial when "rewrite_contact" is enabled and "max_contacts" is greater
than one. The removed contact is likely the old contact created by
"rewrite_contact" that the device is refreshing.
ASTERISK-27192
Change-Id: I64c107a10b70db1697d17136051ae6bf22b5314b
This provides better information to REF_DEBUG log for troubleshooting
when the system is unable to unload res_pjsip.so during shutdown due to
module references.
ASTERISK-27306
Change-Id: I63197ad33d1aebe60d12e0a6561718bdc54e4612
res_pjsip and res_pjsip_session had circular references, preventing both
modules from shutting down.
* Move session supplement registration to res_pjsip.
* Use create internal functions for use by pjsip_message_filter.c.
ASTERISK-27306
Change-Id: Ifbd5c19ec848010111afeab2436f9699da06ba6b
Incoming requests with non sip(s) URIs in the Request, To, From
or Contact URIs are now rejected with
PJSIP_SC_UNSUPPORTED_URI_SCHEME (416). This is performed in
pjsip_message_filter (formerly pjsip_message_ip_updater) and is
done at pjproject's "TRANSPORT" layer before a request can even
reach the distributor.
URIs read by res_pjsip_outbound_publish from pjsip.conf are now
also checked for both length and sip(s) scheme. Those URIs read
by outbound registration and aor were already being checked for
scheme but their error messages needed to be updated to include
scheme failure as well as length failure.
Change-Id: Ibb2f9f1d2dc7549da562af4cbd9156c44ffdd460
A new endpoint parameter "incoming_mwi_mailbox" allows Asterisk to
receive unsolicited MWI NOTIFY requests and make them available to
other modules via the stasis message bus.
res_pjsip_pubsub has a new handler "pubsub_on_rx_mwi_notify_request"
that parses a simple-message-summary body and, if
endpoint->incoming_mwi_account is set, calls ast_publish_mwi_state
with the voice-message counts from the message.
Change-Id: I08bae3d16e77af48fcccc2c936acce8fc0ef0f3c
The fix for the issue is broken up into three parts.
This is part two which handles the server side of REGISTER requests when
rewrite_contact is enabled. Any registered reliable transport contact
becomes invalid when the transport connection becomes disconnected.
* Monitor the rewrite_contact's reliable transport REGISTER contact for
shutdown. If it is shutdown then the contact must be removed because it
is no longer valid. Otherwise, when the client attempts to re-REGISTER it
may be blocked because the invalid contact is there. Also if we try to
send a call to the endpoint using the invalid contact then the endpoint is
not likely to see the request. The endpoint either won't be listening on
that port for new connections or a NAT/firewall will block it.
* Prune any rewrite_contact's registered reliable transport contacts on
boot. The reliable transport no longer exists so the contact is invalid.
* Websockets always rewrite the REGISTER contact address and the transport
needs to be monitored for shutdown.
* Made the websocket transport set a unique name since that is what we use
as the ao2 container key. Otherwise, we would not know which transport we
find when one of them shuts down. The names are also used for PJPROJECT
debug logging.
* Made the websocket transport post the PJSIP_TP_STATE_CONNECTED state
event. Now the global keep_alive_interval option, initially idle shutdown
timer, and the server REGISTER contact monitor can work on wetsocket
transports.
* Made the websocket transport set the PJSIP_TP_DIR_INCOMING direction.
Now initially idle websockets will automatically shutdown.
ASTERISK-27147
Change-Id: I397a5e7d18476830f7ffe1726adf9ee6c15964f4
The fix for the issue is broken up into three parts.
This is part one which refactors the transport state monitor code to allow
more modules to be able to monitor transports.
* Pull the management of PJPROJECT's transport state callback code from
res_pjsip_transport_management.c into res_pjsip. Now other modules can
dynamically add and remove themselves from transport monitoring without
worrying about breaking PJPROJECT's callback chain.
* Add the ability for other modules to get a callback whenever a specific
transport is shutdown.
ASTERISK-27147
Change-Id: I7d9a31371eb1487c9b7050cf82a9af5180a57912
This function is a replica of SIPDtmfMode, allowing the DTMF mode of a
PJSIP call to be modified on a per-call basis
ASTERISK-27085 #close
Change-Id: I20eef5da3e5d1d3e58b304416bc79683f87e7612
This patch creates a new configuration option called "webrtc". When enabled it
defaults and enables the following options that are needed in order for webrtc
to work in Asterisk:
rtcp-mux, use_avpf, ice_support, and use_received_transport=enabled
media_encryption=dtls
dtls_verify=fingerprint
dtls_setup=actpass
When "webrtc" is enabled, this patch also parses the "msid" media level
attribute from an SDP. It will also appropriately add it onto the outgoing
session when applicable.
Lastly, when "webrtc" is enabled h264 RTCP FIR feedback frames are now sent.
ASTERISK-27119 #close
Change-Id: I5ec02e07c5d5b9ad86a34fdf31bf2f9da9aac6fd
BUNDLE is a specification used in WebRTC to allow multiple
streams to use the same underlying transport. This reduces
the number of ICE and DTLS negotiations that has to occur
to 1 normally.
This change implements this by adding support for it to
the RTP SDP module in PJSIP. BUNDLE can be turned on using
the "bundle" option and on an offer we will offer to
bundle streams together. On an answer we will accept any
bundle groups provided. Once accepted each stream is bundled
to another RTP instance for transport.
For the res_rtp_asterisk changes the ability to bundle
an RTP instance to another based on the SSRC received
from the remote side has been added. For outgoing traffic
if an RTP instance is bundled to another we will use the
other RTP instance for any transport related things. For
incoming traffic received from the transport instance we
look up the correct instance based on the SSRC and use it
for any non-transport related data.
ASTERISK-27118
Change-Id: I96c0920b9f9aca7382256484765a239017973c11
If the from_user field contains certain characters (like @, {, ^, etc.),
PJSIP will return a null value for the URI when attempting to parse it.
This causes a crash when trying to dial out through a trunk that contains
these invalid characters in its from_user field.
This change checks the configuration and ensures that an endpoint will
not be created if the from_user contains an invalid character. It also
adds a null check to the PJSIP URI parsing as a backup.
ASTERISK-27036 #close
Reported by: Maxim Vasilev
Change-Id: I0396fdb5080604e0bdf1277464d5c8a85db913d0
When connected_line_method is "invite", we're supposed to determine
if the client can support UPDATE and if it can, send UPDATE instead
of INVITE to avoid the SDP renegotiation. Not only was pjproject
not setting the PJSIP_INV_SUPPORT_UPDATE flag, we were testing
that invite_tsx wasn't NULL which isn't always the case.
* Updated chan_pjsip/update_connected_line_information to drop the
requirement that invite_tsx isn't NULL.
* Submitted patch to pjproject sip_inv.c that sets the
PJSIP_INV_SUPPORT_UPDATE flag correctly.
* Updated pjsip.conf.sample to clarify what happens when "invite"
is specified.
ASTERISK-27095
Change-Id: Ic2381b3567b8052c616d96fbe79564c530e81560
The existing auto dtmf mode reverts to inband if 4733 fails to be
negotiated. This patch adds a new mode auto_info which will
switch to INFO instead of inband if 4733 is not available.
ASTERISK-27066 #close
Change-Id: Id185b11e84afd9191a2f269e8443019047765e91
The stream topology (list of streams and order) is now stored with the
configured PJSIP endpoints and used during the negotiation process.
Media negotiation state information has been changed to be stored
in a separate object. Two of these objects exist at any one time
on a session. The active media state information is what was previously
negotiated and the pending media state information is what the
media state will become if negotiation succeeds. Streams and other
state information is stored in this object using the index (or
position) of each individual stream for easy lookup.
The ability for a media type handler to specify a callback for
writing has been added as well as the ability to add file
descriptors with a callback which is invoked when data is available
to be read on them. This allows media logic to live outside of
the chan_pjsip module.
Direct media has been changed so that only the first audio and
video stream are directly connected. In the future once the RTP
engine glue API has been updated to know about streams each individual
stream can be directly connected as appropriate.
Media negotiation itself will currently answer all the provided streams
on an offer within configured limits and on an offer will use the
topology created as a result of the disallow/allow codec lines.
If a stream has been removed or declined we will now mark it as such
within the resulting SDP.
Applications can now also request that the stream topology change.
If we are told to do so we will limit any provided formats to the ones
configured on the endpoint and send a re-invite with the new topology.
Two new configuration options have also been added to PJSIP endpoints:
max_audio_streams: determines the maximum number of audio streams to
offer/accept from an endpoint. Defaults to 1.
max_video_streams: determines the maximum number of video streams to
offer/accept from an endpoint. Defaults to 1.
ASTERISK-27076
Change-Id: I8afd8dd2eb538806a39b887af0abd046266e14c7
This option was added to control whether to notify dialog-info state
'early' or 'confirmed' on Ringing when already INUSE.
The value "yes" is useful for some SIP phones (Cisco SPA)
to be able to indicate and pick up ringing devices.
ASTERISK-26919 #close
Change-Id: Ie050bc30023543c7dfb4365c5be3ce58c738c711
This introduces the ability for PJSIP code to specify filtering flags
when retrieving PJSIP contacts. The first flag for use causes the
query code to only retrieve contacts that are not unreachable. This
change has been leveraged by both the Dial() process and the
PJSIP_DIAL_CONTACTS dialplan function so they will now only attempt
calls to contacts which are not unreachable.
ASTERISK-26281
Change-Id: I8233b4faa21ba3db114f5a42e946e4b191446f6c
This option was added to turn off notifying the progress details
on Blind Transfer. If this option is not set then the chan_pjsip
will send NOTIFY "200 OK" immediately after "202 Accepted".
Some SIP phones like Mitel/Aastra or Snom keep the line busy until
receive "200 OK".
ASTERISK-26333 #close
Change-Id: Id606fbff2e02e967c02138457badc399144720f2
It's possible for a name in a party id structure to be marked as valid, but the
name string itself be NULL (for instance this is possible to do by using the
dialplan CALLERID function). There were a couple of places where the name was
validated, but the string itself was not checked before passing it to functions
like 'strlen'. This of course caused a crashed.
This patch adds in a NULL check before attempting to pass it into a function
that is not NULL tolerant.
ASTERISK-25823 #close
Change-Id: Iaa6ffe9d92f598fe9e3c8ae373fadbe3dfbf1d4a
Support for RFC3578 overlap dialling (i.e. 484 Response to partially matched
destinations) as currently provided by chan_sip is missing from res_pjsip.
This patch adds a new endpoint attribute (allow_overlap) [defaults to yes]
which when set to yes enables 484 responses to partial destination
matches rather than the current 404.
ASTERISK-26864
Change-Id: Iea444da3ee7c7d4f1fde1d01d138a3d7b0fe40f6
A new transport parameter 'symmetric_transport' has been added.
When a request from a dynamic contact comes in on a transport with
this option set to 'yes', the transport name will be saved and used
for subsequent outgoing requests like OPTIONS, NOTIFY and INVITE.
It's saved as a contact uri parameter named 'x-ast-txp' and will
display with the contact uri in CLI, AMI, and ARI output. On the
outgoing request, if a transport wasn't explicitly set on the
endpoint AND the request URI is not a hostname, the saved transport
will be used and the 'x-ast-txp' parameter stripped from the
outgoing packet.
* config_transport was modified to accept and store the new parameter.
* config_transport/transport_apply was updated to store the transport
name in the pjsip_transport->info field using the pjsip_transport->pool
on UDP transports.
* A 'multihomed_on_rx_message' function was added to
pjsip_message_ip_updater that, for incoming requests, retrieves the
transport name from pjsip_transport->info and retrieves the transport.
If transport->symmetric_transport is set, an 'x-ast-txp' uri parameter
containing the transport name is added to the incoming Contact header.
* An 'ast_sip_get_transport_name' function was added to res_pjsip.
It takes an ast_sip_endpoint and a pjsip_sip_uri and returns a
transport name if endpoint->transport is set or if there's an
'x-ast-txp' parameter on the uri and the uri host is an ipv4 or
ipv6 address. Otherwise it returns NULL.
* An 'ast_sip_dlg_set_transport' function was added to res_pjsip
which takes an ast_sip_endpoint, a pjsip_dialog, and an optional
pjsip_tpselector. It calls ast_sip_get_transport_name() and if
a non-NULL is returned, sets the selector and sets the transport
on the dialog. If a selector was passed in, it's updated.
* res_pjsip/ast_sip_create_dialog_uac and ast_sip_create_dialog_uas
were modified to call ast_sip_dlg_set_transport() instead of their
original logic.
* res_pjsip/create_out_of_dialog_request was modified to call
ast_sip_get_transport_name() and pjsip_tx_data_set_transport()
instead of its original logic.
* Existing transport logic was removed from endpt_send_request
since that can only be called after a create_out_of_dialog_request.
* res_pjsip/ast_sip_create_rdata was converted to a wrapper around
a new 'ast_sip_create_rdata_with_contact' function which allows
a contact_uri to be specified in addition to the existing
parameters. (See below)
* res_pjsip_pubsub/internal_pjsip_evsub_send_request was eliminated
since all it did was transport selection and that is now done in
ast_sip_create_dialog_uac and ast_sip_create_dialog_uas.
* 'contact_uri' was added to subscription_persistence. This was
necessary because although the parsed rdata contact header has the
x-ast-txp parameter added (if appropriate),
subscription_persistence_update stores the raw packet which
doesn't have it. subscription_persistence_recreate was then
updated to call ast_sip_create_rdata_with_contact with the
persisted contact_uri so the recreated subscription has the
correct transport info to send the NOTIFYs.
* res_pjsip_session/internal_pjsip_inv_send_msg was eliminated since
all it did was transport selection and that is now done in
ast_sip_create_dialog_uac.
* pjsip_message_ip_updater/multihomed_on_tx_message was updated
to remove all traces of the x-ast-txp parameter from the
outgoing headers.
NOTE: This change does NOT modify the behavior of permanent
contacts specified on an aor. To do so would require that the
permanent contact's contact uri be updated with the x-ast-txp
parameter and the aor sorcery object updated. If we need to
persue this, we need to think about cloning permanent contacts into
the same store as the dynamic ones on an aor load so they can be
updated without disturbing the originally configured value.
You CAN add the x-ast-txp parameter to a permanent contact's uri
but it would be much simpler to just set endpoint->transport.
Change-Id: I4ee1f51473da32ca54b877cd158523efcef9655f
This commit adds support for RFC 5761: Multiplexing RTP Data and Control
Packets on a Single Port. Specifically, it enables the feature when
using chan_pjsip.
A new option, "rtcp_mux" has been added to endpoint configuration in
pjsip.conf. If set, then Asterisk will attempt to use rtcp-mux with
whatever it communicates with. Asterisk follows the rules set forth in
RFC 5761 with regards to falling back to standard RTCP behavior if the
far end does not indicate support for rtcp-mux.
The lion's share of the changes in this commit are in
res_rtp_asterisk.c. This is because it was pretty much hard wired to
have an RTP and an RTCP transport. The strategy used here is that when
rtcp-mux is enabled, the current RTCP transport and its trappings (such
as DTLS SSL session) are freed, and the RTCP session instead just
mooches off the RTP session. This leads to a lot of specialized if
statements throughout.
ASTERISK-26732 #close
Reported by Dan Jenkins
Change-Id: If46a93ba1282418d2803e3fd7869374da8b77ab5
This change adds a PJSIP patch (which has been contributed upstream)
to allow the registration of IPv6 transport types.
Using this the res_pjsip_transport_websocket module now registers
an IPv6 Websocket transport and uses it for the corresponding
traffic.
ASTERISK-26685
Change-Id: Id1f9126f995b31dc38db8fdb58afd289b4ad1647
This change updates the documentation for the outbound_proxy option
to ensure it is consistently stated that a full SIP URI must be
provided for the option.
The res_pjsip_outbound_registration module has also been changed so
that the provided outbound_proxy value is checked to ensure it is a
URI and if not an error is output stating so.
ASTERISK-26782
Change-Id: I6c239a32274846fd44e65b44ad9bf6373479b593
* Removed all 2.5.5 functional patches.
* Updated usages of pj_release_pool to be "safe".
* Updated configure options to disable webrtc.
* Updated config_site.h to disable webrtc in pjmedia.
* Added Richard Mudgett's recent resolver patches.
Change-Id: Ib400cc4dfca68b3d07ce14d314e829bfddc252c7
Using the same auth section for inbound and outbound authentication is not
recommended. There is a difference in meaning for an empty realm setting
between inbound and outbound authentication uses.
An empty inbound auth realm represents the global section's default_realm
value when the authentication object is used to challenge an incoming
request. An empty outgoing auth realm is treated as a don't care wildcard
when the authentication object is used to respond to an incoming
authentication challenge.
ASTERISK-26799
Change-Id: Id3952f7cfa1b6683b9954f2c5d2352d2f11059ce
The original return value corresponded to AST_SIP_AUTHENTICATION_CHALLENGE
but we have no authenticator registered to create the challenge.
Change-Id: I62368180d774b497411b80fbaabd0c80841f8512
This reverts commit 6492e91392.
The change in question was intended to prevent the need to reload in
order to update qualifies on contacts when an AOR changes. However, this
ended up causing a deadlock instead.
Change-Id: I1a835c90a5bb65b6dc3a1e94cddc12a4afc3d71e
Prior to this change, qualifies would only update in the following
cases:
* A reload of res_pjsip.so was issued.
* A dynamic contact was re-registered after its AOR's qualify_frequency
had been changed
This does not work well if you are using realtime for your AORs. You can
update your database to have a new qualify_frequency, but the permanent
contacts on that AOR will not have their qualifies updated. And the
dynamic contacts on that AOR will not have their qualifies updated until
the next registration, which could be a long time.
This change seeks to fix this problem by making it so that whenever AOR
configuration is applied, the contacts pertaining to that AOR have their
qualifies updated.
Additions from this patch:
* AOR sorcery objects now have an apply handler that calls into a newly
added function in the OPTIONS code. This causes all contacts
associated with that AOR to re-schedule qualifies.
* When it is time to qualify a contact, the OPTIONS code checks to see
if the AOR can still be retrieved. If not, then qualification is
canceled on the contact.
Alterations from this patch:
* The registrar code no longer updates contact's qualify_frequence and
qualify_timeout. There is no point to this since those values already
get updated when the AOR changes.
* Reloading res_pjsip.so no longer calls the OPTIONS initialization
function. Reloading res_pjsip.so results in re-loading AORs, which
results in re-scheduling qualifies.
Change-Id: I2e7c3316da28f389c45954f24c4e9389abac1121
There are some error cases in PJSIP when sending a request that will
result in the callback for the request being invoked. The code did not
handle this case and assumed on every error case that the callback was not
invoked.
The code has been changed to check whether the callback has been invoked
and if so to absorb the error and treat it as a success.
ASTERISK-26679
ASTERISK-26699
Change-Id: I563982ba204da5aa1428989a11c06dd9087fea91
The PJSIPShowRegistrationsInbound AMI command was just dumping out
all AORs which was pretty useless and resource heavy since it had
to get all endpoints, then all aors for each endpoint, then all
contacts for each aor.
PJSIPShowRegistrationInboundContactStatuses sends ContactStatusDetail
events which meets the intended purpose of the other command and has
significantly less overhead. Also, some additional fields that were
added to Contact since the original creation of the ContactStatusDetail
event have been added to the end of the event.
For compatibility purposes, PJSIPShowRegistrationsInbound is left
intact.
ASTERISK-26644 #close
Change-Id: I326f12c9ecb52bf37ba03f0748749de4da01490a
* Don't hold the req_wrapper lock too long in endpt_send_request(). We
could block the PJSIP monitor thread if the timeout timer expires.
sip_get_tpselector_from_endpoint() does a sorcery access that could take
awhile accessing a database. pjsip_endpt_send_request() might take awhile
if selecting a transport.
* Shorten the time that the req_wrapper lock is held in the callback
functions.
* Simplify endpt_send_request() req_wrapper->timeout code.
* Removed some redundant req_wrapper->timeout_timer->id assignments.
Change-Id: I3195e3a8e0207bb8e7f49060ad2742cf21a6e4c9
When channel format changes occurred as a result of an RTP
re-negotiation the bridge was not informed this had happened.
As a result the bridge technology was not re-evaluated and the
channel may have been in a bridge technology that was incompatible
with its formats. The bridge is now unbridged and the technology
re-evaluated when this occurs.
The chan_pjsip module also allowed asymmetric codecs for sending
and receiving. This did not work with all devices and caused one
way audio problems. The default has been changed to NOT do this
but to match the sending codec to the receiving codec. For users
who want asymmetric codecs an option has been added, asymmetric_rtp_codec,
which will return chan_pjsip to the previous behavior.
The codecs returned by the chan_pjsip module when queried by
the bridge_native_rtp module were also not reflective of the
actual negotiated codecs. The nativeformats are now returned as
they reflect the actual negotiated codecs.
ASTERISK-26423 #close
Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc
This change adds support for dual stack automatically. No
configuration is required and the IP address and version
in the SIP messages and SDP will be automatically changed
based on the transport over which the message is being
sent. RTP usage has also been changed to listen on both
IPv4 and IPv6 simultaneously to allow media to flow, and
to allow ICE support on both simultaneously. This also
allows failover between IPv6 and IPv4 to work as expected.
ASTERISK-26309 #close
Change-Id: I235a421d8f9a326606d861b449fa6fe3a030572d
When performing DNS resolution the failover code present in
res_pjsip currently assumes that a request will always have
at least one viable address. In practice this is not true.
A domain may be used that has no records.
The code now checks that at least one address exists on the
request which prevents looping.
ASTERISK-26364 #close
Change-Id: Ic0761b0264864acd85915c94d878a81624940f4c
This implements the chan_sip legacy_useroption_parsing option but with a
better name.
* Made the caller-id number and redirecting number strings obtained from
incoming SIP URI user fields always truncated at the first semicolon.
People don't care about anything after the semicolon showing up on their
displays even though the RFC allows the semicolon.
ASTERISK-26316 #close
Reported by: Kevin Harwell
Change-Id: Ib42b0e940dd34d84c7b14bc2e90d1ba392624f62
This patch add config to pjsip by endpoint.
;preferred_codec_only=yes
; Respond to a SIP invite with the single most preferred codec
; rather than advertising all joint codec capabilities. This
; limits the other side's codec choice to exactly what we prefer.
ASTERISK-26317 #close
Reported by: AaronAn
Tested by: AaronAn
Change-Id: Iad04dc55055403bbf5ec050997aee2dadc4f0762
contact_user, when specified on an endpoint, will override the user
portion of the Contact header on outgoing requests.
Change-Id: Icd4ebfda2f2e44d3ac749d0b4066630e988407d4
The PJSIP taskprocessors could be overflowed on startup
if there are many (thousands) realtime endpoints
configured with unsolicited mwi.
The PJSIP stack could be totally unresponsive for a few minutes
after boot completed.
This patch creates a separate PJSIP serializers pool for mwi
and makes unsolicited mwi use serializers from this pool.
This patch also adds 2 new global options to tune taskprocessor
alert levels: 'mwi_tps_queue_high' and 'mwi_tps_queue_low'.
This patch also adds new global option 'mwi_disable_initial_unsolicited'
to disable sending unsolicited mwi to all endpoints on startup.
If disabled then unsolicited mwi will start processing
on next endpoint's contact update.
ASTERISK-26230 #close
Change-Id: I4c8ecb82c249eb887930980a800c9f87f28f861a
The new endpoint option allows the PJSIP channel driver's fax_detect
endpoint option to timeout on a call after the specified number of
seconds into a call. The new feature is disabled if the timeout is set
to zero. The option is disabled by default.
ASTERISK-26214
Reported by: Richard Mudgett
Change-Id: Id5a87375fb2c4f9dc1d4b44c78ec8735ba65453d
If AST_TEST_DEFINE is not conditional to TEST_FRAMEWORK it produces dead
code. This places all existing unit tests into a conditional block if
they weren't already.
ASTERISK-26211 #close
Change-Id: I8ef83ee11cbc991b07b7a37ecb41433e8c734686
If specified, incoming SUBSCRIBE requests will be searched for the matching
extension in the indicated context. If no "subscribe_context" is specified,
then the "context" setting is used.
ASTERISK-25471 #close
Change-Id: I3fb7a15f5bc154079bd348c08b7ad1cdd2d5e514
Registering the PJMEDIA error codes allows errors found when parsing an
incoming SDP to be easier to figure out.
"Missing SDP rtpmap for dynamic payload type (PJMEDIA_SDP_EMISSINGRTPMAP)"
is much easier to understand than "Unknown error 220030".
ASTERISK-25772
Change-Id: I44b2dcea656fedd7593171be9e845880a2c70ca0
The patch removes updating all Endpoints' status on startup.
Instead, only non-qualified aors with static contact
and non-qualified non-expired contacts are retrieved from the realtime to
update the endpoint status to ONLINE.
The endpoint name was added to the contact object to simply find the endpoint
that created this contact.
The status of endpoints with qualified aors will be updated by 'qualify'
functions.
ASTERISK-26061 #close
Change-Id: Id324c1776fa55d3741e0c5457ecac0304cb1a0df
As res_pjsip_nat rewrites contact's address, only the last Via header
can contain the source address of registered endpoint.
Also Call-Id header may contain the source address of registered
endpoint.
Added "via_addr", "via_port", "call_id" to contact.
Added new fields ViaAddress, CallID to AMI event ContactStatus.
ASTERISK-26011
Change-Id: I36bcc0bf422b3e0623680152d80486aeafe4c576
The send request callback function currently assumes that it
will only ever be called on transaction state changes. This is
not always true. If our own timer callback occurs we will call
the callback with a timer event instead of a transaction state
change event. In this case the transaction on the event is
invalid and accessing it will result in a crash.
ASTERISK-26049 #close
Change-Id: I623211c8533eb73056b0250b4580b49ad4174dfc
With the old SIP module we can use IP access controls per peer.
PJSIP module missing this feature.
This patch added next configuration Endpoint options:
"acl" - list of IP ACL section names in acl.conf
"deny" - List of IP addresses to deny access from
"permit" - List of IP addresses to permit access from
"contact_acl" - List of Contact ACL section names in acl.conf
"contact_deny" - List of Contact header addresses to deny
"contact_permit" - List of Contact header addresses to permit
This patch also better logging failed request:
add custom message instead of "No matching endpoint found"
add SIP method to logging
ASTERISK-25900
Change-Id: I456dea3909d929d413864fb347d28578415ebf02
This patch modified pjsip_options to retrieve only
permament contacts for aor if the qualify_frequency is > 0
and persisted contacts if the qualify_frequency is > 0.
This patch also fixed a bug in res_sorcery_astdb.
res_sorcery_astdb doesn't save object data retrived from astdb.
ASTERISK-25826
Change-Id: I1831fa46c4578eae5a3e574ee3362fddf08a1f05
If the Asterisk system name is set in asterisk.conf, it will be stored
into the "reg_server" field in the ps_contacts table to facilitate
multi-server setups.
ASTERISK-25931
Change-Id: Ia8f6bd2267809c78753b52bcf21835b9b59f4cb8
A feature of chan_sip that service providers relied upon was the ability to
identify by the Authorization username. This is most often used when customers
have a PBX that needs to register rather than identify by IP address. From my
own experiance, this is pretty common with small businesses who otherwise
don't need a static IP.
In this scenario, a register from the customer's PBX may succeed because From
will usually contain the PBXs account id but an INVITE will contain the caller
id. With nothing recognizable in From, the service provider's Asterisk can
never match to an endpoint and the INVITE just stays unauthorized.
The fixes:
A new value "auth_username" has been added to endpoint/identify_by that
will use the username and digest fields in the Authorization header
instead of username and domain in the the From header to match an endpoint,
or the To header to match an aor. This code as added to
res_pjsip_endpoint_identifier_user rather than creating a new module.
Although identify_by was always a comma-separated list, there was only
1 choice so order wasn't preserved. So to keep the order, a vector was added
to the end of ast_sip_endpoint. This is only used by res_pjsip_registrar
to find the aor. The res_pjsip_endpoint_identifier_* modules are called in
globals/endpoint_identifier_order.
Along the way, the logic in res_pjsip_registrar was corrected to match
most-specific to least-specific as res_pjsip_endpoint_identifier_user does.
The order is:
username@domain
username@domain_alias
username
Auth by username does present 1 problem however, the first INVITE won't have
an Authorization header so the distributor, not finding a match on anything,
sends a securty_alert. It still sends a 401 with a challenge so the next
INVITE will have the Authorization header and presumably succeed. As a result
though, that first security alert is actually a false alarm.
To address this, a new feature has been added to pjsip_distributor that keeps
track of unidentified requests and only sends the security alert if a
configurable number of unidentified requests come from the same IP in a
configurable amout of time. Those configuration options have been added to
the global config object. This feature is only used when auth_username
is enabled.
Finally, default_realm was added to the globals object to replace the hard
coded "asterisk" used when an endpoint is not yet identified.
The testsuite tests all pass but new tests are forthcoming for this new
feature.
ASTERISK-25835 #close
Reported-by: Ross Beer
Change-Id: I30ba62d208e6f63439600916fcd1c08a365ed69d
This patch added new global pjsip option 'disable_multi_domain'.
Disabling Multi Domain can improve Realtime performance by reducing
number of database requests.
ASTERISK-25930 #close
Change-Id: I2e7160f3aae68475d52742107949a799aa2c7dc7
There are several places that do scheduled tasks or periodic housecleaning,
each with its own implementation:
* res_pjsip_keepalive has a thread that sends keepalives.
* pjsip_distributor has a thread that cleans up expired unidentified requests.
* res_pjsip_registrar_expire has a thread that cleans up expired contacts.
* res_pjsip_pubsub uses ast_sched directly and then calls ast_sip_push_task.
* res_pjsip_sdp_rtp also uses ast_sched to send keepalives.
There are also places where we should be doing scheduled work but aren't.
A good example are the places we have sorcery observers to start registration
or qualify. These don't work when changes are made to a backend database
without a pjsip reload. We need to check periodically.
As a first step to solving these issues, a new ast_sip_sched facility has
been created.
ast_sip_sched wraps ast_sched but only uses ast_sched as a scheduled queue.
When a task is ready to run, ast_sip_task_pusk is called for it. This ensures
that the task is executed in a PJLIB registered thread and doesn't hold up the
ast_sched thread so it can immediately continue processing the queue. The
serializer used by ast_sip_sched is one of your choosing or a random one from
the res_pjsip pool if you don't choose one.
Another feature is the ability to automatically clean up the task_data when the
task expires (if ever). If it's an ao2 object, it will be dereferenced, if
it's a malloc'd object it will be freed. This is selectable when the task is
scheduled. Even if you choose to not auto dereference an ao2 task data object,
the scheduler itself maintains a reference to it while the task is under it's
control. This prevents the data from disappearing out from under the task.
There are two scheduling models.
AST_SIP_SCHED_TASK_PERIODIC specifies that the invocations of the task occur at
the specific interval. That is, every "interval" milliseconds, regardless of
how long the task takes. If the task takes longer than the interval, it will
be scheduled at the next available multiple of interval. For exmaple: If the
task has an interval of 60 secs and the task takes 70 secs (it better not),
the next invocation will happen at 120 seconds.
AST_SIP_SCHED_TASK_DELAY specifies that the next invocation of the task should
start "interval" milliseconds after the current invocation has finished.
Also, the same ast_sched facility for fixed or variable intervals exists. The
task's return code in conjunction with the AST_SIP_SCHED_TASK_FIXED or
AST_SIP_SCHED_TASK_VARIABLE flags controls the next invocation start time.
One res_pjsip.h housekeeping change was made. The pjsip header files were
added to the top. There have been a few cases lately where I've needed
res_pjsip.h just for ast_sip calls and had compiles fail spectacularly because
I didn't add the pjsip header files to my source even though I never referenced
any pjsip calls.
Finally, a few new convenience APIs were added to astobj2 to make things a
little easier in the scheduler. ao2_ref_and_lock() calls ao2_ref() and
ao2_lock() in one go. ao2_unlock_and_unref() does the reverse. A few macros
were also copied from res_phoneprov because I got tired of having to duplicate
the same hash, sort and compare functions over and over again. The
AO2_STRING_FIELD_(HASH|SORT|CMP)_FN macros will insert functions suitable for
aor_container_alloc into your source.
This facility can be used immediately for the situations where we already have
a thread that wakes up periodically or do some scheduled work. For the
registration and qualify issues, additional sorcery and schema changes would
need to be made so that we can easily detect changed objects on a periodic
basis without having to pull the entire database back to check. I'm thinking
of a last-updated timestamp on the rows but more on this later.
Change-Id: I7af6ad2b2d896ea68e478aa1ae201d6dd016ba1c
* Added Useragent and RegExpire headers to AMI Event
ContactStatusDetail with associated documentation.
ASTERISK-25903 #close
Change-Id: If3d121e943e588d016ba51d4eb9c6a421a562239
res_pjsip_mwi was missing the chan_sip "vmexten" functionality which adds
the Message-Account header to the MWI NOTIFY. Also, specifying mailboxes
on endpoints for unsolicited mwi and on aors for subscriptions required
that the admin know in advance which the client wanted. If you specified
mailboxes on the endpoint, subscriptions were rejected even if you also
specified mailboxes on the aor.
Voicemail extension:
* Added a global default_voicemail_extension which defaults to "".
* Added voicemail_extension to both endpoint and aor.
* Added ast_sip_subscription_get_dialog for support.
* Added ast_sip_subscription_get_sip_uri for support.
When an unsolicited NOTIFY is constructed, the From header is parsed, the
voicemail extension from the endpoint is substituted for the user, and the
result placed in the Message-Account field in the body.
When a subscribed NOTIFY is constructed, the subscription dialog local uri
is parsed, the voicemail_extension from the aor (looked up from the
subscription resource name) is substituted for the user, and the result
placed in the Message-Account field in the body.
If no voicemail extension was defined, the Message-Account field is not added
to the NOTIFY body.
mwi_subscribe_replaces_unsolicited:
* Added mwi_subscribe_replaces_unsolicited to endpoint.
The previous behavior was to reject a subscribe if a previous internal
subscription for unsolicited MWI was found for the mailbox. That remains the
default. However, if there are mailboxes also set on the aor and the client
subscribes and mwi_subscribe_replaces_unsolicited is set, the existing internal
subscription is removed and replaced with the external subscription. This
allows an admin to configure mailboxes on both the endpoint and aor and allows
the client to select which to use.
ASTERISK-25865 #close
Reported-by: Ross Beer
Change-Id: Ic15a9415091760539c7134a5ba3dc4a6a1217cea
No one seemed to notice but every time an OPTIONS goes out, it goes
out with a From of "asterisk" (or whatever the default from_user is set to),
even if you specify an endpoint.
The issue had several causes...
qualify_contact is only called with an endpoint if called from the CLI.
If the endpoint is NULL, qualify_contact only looks up the endpoint if
authenticate_qualify=yes. Even then, it never passes it on to
ast_sip_create_request where the From header is set. Therefore From
is always "asterisk" (or whatever the default from_user is set to).
Even if ast_sip_create_request were to get an endpoint, it only sets
the From if endpoint->from_user is set.
The fix is 4 parts...
First, create_out_of_dialog_request was modified to use the endpoint id
if endpoint was specified and from_user is not set.
Second, qualify_contact was modified to always look up an endpoint if
one wasn't specified regardless of authenticate_qualify. It then passes
the endpoint on to create_out_of_dialog_request.
Third (and most importantly), find_an_endpoint was modified to find
an endpoint by using an "aors LIKE %contact->aor%" predicate with
ast_sorcery_retrieve_by_fields. As such, this patch will only work
if the sorcery realtime optimizations patch goes in. Otherwise we'd
be pulling the entire endpoints database every time we send an OPTIONS.
Since we already know the contact's aor, the on_endpoint callback was also
modified to just check if the contact->aor is an exact match to one of
the endpoint's.
Finally, since we now have an endpoint for every OPTIONS request,
res_pjsip/endpt_send_request (which handles out-of-dialog reqests) was
updated to get the transport from the endpoint and set it on tdata.
Now the correct transport is used.
Change-Id: I2207e12bb435e373bd1e03ad091d82e5aba011af
There were a number of places in the res_pjsip stack that were getting
all endpoints or all aors, and then filtering them locally.
A good example is pjsip_options which, on startup, retrieves all
endpoints, then the aors for those endpoints, then tests the aors to see
if the qualify_frequency is > 0. One issue was that it never did
anything with the endpoints other than retrieve the aors so we probably
could have skipped a step and just retrieved all aors. But nevermind.
This worked reasonably well with local config files but with a realtime
backend and thousands of objects, this was a nightmare. The issue
really boiled down to the fact that while realtime supports predicates
that are passed to the database engine, the non-realtime sorcery
backends didn't.
They do now.
The realtime engines have a scheme for doing simple comparisons. They
take in an ast_variable (or list) for matching, and the name of each
variable can contain an operator. For instance, a name of
"qualify_frequency >" and a value of "0" would create a SQL predicate
that looks like "where qualify_frequency > '0'". If there's no operator
after the name, the engines add an '=' so a simple name of
"qualify_frequency" and a value of "10" would return exact matches.
The non-realtime backends decide whether to include an object in a
result set by calling ast_sorcery_changeset_create on every object in
the internal container. However, ast_sorcery_changeset_create only does
exact string matches though so a name of "qualify_frequency >" and a
value of "0" returns nothing because the literal "qualify_frequency >"
doesn't match any name in the objset set.
So, the real task was to create a generic string matcher that can take a
left value, operator and a right value and perform the match. To that
end, strings.c has a new ast_strings_match(left, operator, right)
function. Left and right are the strings to operate on and the operator
can be a string containing any of the following: = (or NULL or ""), !=,
>, >=, <, <=, like or regex. If the operator is like or regex, the
right string should be a %-pattern or a regex expression. If both left
and right can be converted to float, then a numeric comparison is
performed, otherwise a string comparison is performed.
To use this new function on ast_variables, 2 new functions were added to
config.c. One that compares 2 ast_variables, and one that compares 2
ast_variable lists. The former is useful when you want to compare 2
ast_variables that happen to be in a list but don't want to traverse the
list. The latter will traverse the right list and return true if all
the variables in it match the left list.
Now, the backends' fields_cmp functions call ast_variable_lists_match
instead of ast_sorcery_changeset_create and they can now process the
same syntax as the realtime engines. The realtime backend just passes
the variable list unaltered to the engine. The only gotcha is that
there's no common realtime engine support for regex so that's been noted
in the api docs for ast_sorcery_retrieve_by_fields.
Only one more change to sorcery was done... A new config flag
"allow_unqualified_fetch" was added to reg_sorcery_realtime.
"no": ignore fetches if no predicate fields were supplied.
"error": same as no but emit an error. (good for testing)
"yes": allow (the default);
"warn": allow but emit a warning. (good for testing)
Now on to res_pjsip...
pjsip_options was modified to retrieve aors with qualify_frequency > 0
rather than all endpoints then all aors. Not only was this a big
improvement in realtime retrieval but even for config files there's an
improvement because we're not going through endpoints anymore.
res_pjsip_mwi was modified to retieve only endpoints with something in
the mailboxes field instead of all endpoints then testing mailboxes.
res_pjsip_registrar_expire was completely refactored. It was retrieving
all contacts then setting up scheduler entries to check for expiration.
Now, it's a single thread (like keepalive) that periodically retrieves
only contacts whose expiration time is < now and deletes them. A new
contact_expiration_check_interval was added to global with a default of
30 seconds.
Ross Beer reports that with this patch, his Asterisk startup time dropped
from around an hour to under 30 seconds.
There are still objects that can't be filtered at the database like
identifies, transports, and registrations. These are not going to be
anywhere near as numerous as endpoints, aors, auths, contacts however.
Back to allow_unqualified_fetch. If this is set to yes and you have a
very large number of objects in the database, the pjsip CLI commands
will attempt to retrive ALL of them if not qualified with a LIKE.
Worse, if you type "pjsip show endpoint <tab>" guess what's going to
happen? :) Having a cache helps but all the objects will have to be
retrieved at least once to fill the cache. Setting
allow_unqualified_fetch=no prevents the mass retrieve and should be used
on endpoints, auths, aors, and contacts. It should NOT be used for
identifies, registrations and transports since these MUST be
retrieved in bulk.
Example sorcery.conf:
[res_pjsip]
endpoint=config,pjsip.conf,criteria=type=endpoint
endpoint=realtime,ps_endpoints,allow_unqualified_fetch=error
ASTERISK-25826 #close
Reported-by: Ross Beer
Tested-by: Ross Beer
Change-Id: Id2691e447db90892890036e663aaf907b2dc1c67
Per RFC3325, the 'From' header is now anonymized on outgoing calls when
caller id presentation is prohibited.
TID = trust_id_outbound
PRO = Set(CALLERID(pres)=prohib)
USR = endpoint/from_user
DOM = endpoint/from_domain
PAI = YES(privacy=off), NO(not sent), PRI(privacy=full) (assumes send_pai=yes)
Conditions |Result
--------------------|----------------------------------------------------
TID PRO USR DOM |PAI FROM
--------------------|----------------------------------------------------
Y Y abc def.ghi |PRI "Anonymous" <sip:abc@def.ghi>
Y Y abc |PRI "Anonymous" <sip:abc@anonymous.invalid>
Y Y def.ghi |PRI "Anonymous" <sip:anonymous@def.ghi>
Y Y |PRI "Anonymous" <sip:anonymous@anonymous.invalid>
Y N abc def.ghi |YES <sip:abc@def.ghi>
Y N abc |YES <sip:abc@<ip_address>>
Y N def.ghi |YES "Caller Name" <sip:<caller_exten>@def.ghi>
Y N |YES "Caller Name" <sip:<caller_exten>@<ip_address>>
N Y abc def.ghi |NO "Anonymous" <sip:abc@def.ghi>
N Y abc |NO "Anonymous" <sip:abc@anonymous.invalid>
N Y def.ghi |NO "Anonymous" <sip:anonymous@def.ghi>
N Y |NO "Anonymous" <sip:anonymous@anonymous.invalid>
N N abc def.ghi |YES <sip:abc@def.ghi>
N N abc |YES <sip:abc@<ip_address>>
N N def.ghi |YES "Caller Name" <sip:<caller_exten>@def.ghi>
N N |YES "Caller Name" <sip:<caller_exten>@<ip_address>>
ASTERISK-25791 #close
Reported-by: Anthony Messina
Change-Id: I2c82a5ca1413c2c00fb62ea95b0ae8e97af54dc9
The 'reload' mechanism actually involves closing the underlying
socket and calling the appropriate udp, tcp or tls start functions
again. Only outbound_registration, pubsub and session needed work
to reset the transport before sending requests to insure that the
pjsip transport didn't get pulled out from under them.
In my testing, no calls were dropped when a transport was changed
for any of the 3 transport types even if ip addresses or ports were
changed. To be on the safe side however, a new transport option was
added (allow_reload) which defaults to 'no'. Unless it's explicitly
set to 'yes' for a transport, changes to that transport will be ignored
on a reload of res_pjsip. This should preserve the current behavior.
Change-Id: I5e759850e25958117d4c02f62ceb7244d7ec9edf
load_module was just too hairy with every step having to clean up all
previous steps on failure.
Some of the pjproject init calls have now been moved to a separate
load_pjsip function and the unload_pjsip function was enhanced to clean
up everything if an error happened at any stage of the load process.
In the process, a bunch of missing pj_shutdowns, serializer_pool_shutdowns
and ast_threadpool_shutdowns were also corrected.
Change-Id: I5eec711b437c35b56605ed99537ebbb30463b302
Pjproject has deprecated pjsip_dlg_create_uas in 2.5 and replaced it with
pjsip_dlg_create_uas_and_inc_lock which, as the name implies, automatically
increments the lock on the returned dialog. To account for this, configure.ac
now detects the presence of pjsip_dlg_create_uas_and_inc_lock and res_pjsip.c
has an #ifdef HAVE_PJSIP_DLG_CREATE_UAS_AND_INC_LOCK to decide whether to use
the original call or the new one. If the new one was used, the ref count is
decremented before returning.
ASTERISK-25751 #close
Reported-by Josh Colp
Change-Id: I1be776b94761df03bd0693bc7795a75682615ca8
Attempting to load a transport from realtime was forcing asterisk into an
infinite recursion loop. The first thing transport_apply did was to do a
sorcery retrieve by id for an existing transport of the same name. For files,
this just returns the previous object from res_sorcery_config's internal
container, if any. For realtime, the res_sourcery_realtime driver looks in the
database and finds the existing row but now it has to rehydrate it into a
sorcery object which means calling... transport_apply. And so it goes.
The main issue with loading from realtime (apart from the loop) was that
transport stores structures and pointers directly in the ast_sip_transport
structure instead of the separate ast_transport_state structure. This patch
separates those items into the ast_sip_transport_state structure. The pattern
is roughly the same as res_pjsip_outbound_registration.
Although all current usages of ast_sip_transport and ast_sip_transport_state
were modified to use the new ast_sip_get_transport_state API, the original
items are left in ast_sip_transport and kept updated to maintain ABI
compatability for third-party modules. They are marked as deprecated and
noted that they're now in ast_sip_transport_state.
ASTERISK-25606 #close
Reported-by: Martin Moučka
Change-Id: Ic7a836ea8e786e8def51fe3f8cce855ea54f5f19
Dump the res_pjsip endpt internals.
In non-developer mode we will not document or make easily accessible the
"details" option even though it is still available. The user has to know
it exists to use it. Presumably they would also be aware of the potential
crash warning below.
Warning: PJPROJECT documents that the function used by this CLI command
may cause a crash when asking for details because it tries to access all
active memory pools.
Change-Id: If2d98a3641c9873364d1daaad971376311aef3cb
Added new global option (regcontext) to pjsip. When set, Asterisk will
dynamically create and destroy a NoOp priority 1 extension
for a given endpoint who registers or unregisters with us.
ASTERISK-25670 #close
Reported-by: Daniel Journo
Change-Id: Ib1530c5b45340625805c057f8ff1fb240a43ea62
On a system with multiple ip addresses in the same subnet, if a
transport is bound to a specific ip address and endpoint/media_address
is set, the SIP/SDP will have the correct address in all fields but
the rtp stream MAY still originate from one of the other ip addresses,
most probably the "primary" ip address. This happens because
res_pjsip_sdp_rtp/create_rtp always calls ast_instance_new with
the "all" ip address (0.0.0.0 or ::).
The new option causes res_pjsip_sdp_rtp/create_rtp to call
ast_rtp_instance_new with the endpoint's media_address (if specified)
instead of the "all" address. This causes the packets to originate from
the specified address.
ASTERISK-25632
ASTERISK-25637
Reported-by: Olivier Krief
Reported-by: Dan Journo
Change-Id: I3dfaa079e54ba7fb7c4fd1f5f7bd9509bbf8bd88
When a request is sent using pjsip_endpt_send_request and fails, a condition
exists where the request wrapper, which is an AO2 object, may be de-ref'd
more times than it should. This occurs when the request's callback is called,
and, in the callback, the timer on the PJSIP heap is cancelled. When that
occurs, the request wrapper's lifetime is decremented. When
pjsip_endpt_send_request fails, we unilaterally decrement the lifetime of
the request wrapper again, even though we've already cancelled the reference
associated with the timer.
This patch checks the return result of pj_timer_heap_cancel_if_active before
removing the reference associated with the timer. We now only decrement it
in this case if a timer is cancelled as a result of the function call.
Change-Id: I21332343a1a019c1117076f9bf2df27be2850102
We have observed situations where the SIP threadpool may become
deadlocked. However, because incoming traffic is still arriving, the SIP
threadpool's queue can continue to grow, eventually running the system
out of memory.
This change makes it so that incoming traffic gets rejected with a 503
response if the queue is backed up too much.
Change-Id: I4e736d48a2ba79fd1f8056c0dcd330e38e6a3816
In a realtime based system with a limited number of threadpool threads
it is possible for a deadlock to occur. This happens when permanent
endpoint state is updated, which will cause database queries to be done.
These queries may result in URI validation being done which is done
synchronously using a PJSIP thread. If all PJSIP threads are in use
processing traffic they themselves may be blocked waiting to get the
permanent endpoint container lock when identifying an endpoint.
This change moves URI validation to occur at use time instead of
configuration time. While this comes at a cost of not seeing a problem
until you use it it does solve the underlying deadlock problem.
ASTERISK-25486 #close
Change-Id: I2d7d167af987d23b3e8199e4a68f3359eba4c76a
The struct send_request_wrapper has a pjsip lock associated with it that
is created non-recursive. There is a code path for the struct
send_request_wrapper lock that will attempt to lock it recursively. The
reporter's deadlock showed that the thread calling endpt_send_request()
deadlocked itself right after the wrapper object got created.
Out-of-dialog requests such as MESSAGE, qualify OPTIONS, and unsolicited
MWI NOTIFY messages can hit this deadlock.
* Replaced the struct send_request_wrapper pjsip lock with the mutex lock
that can come with an ao2 object since all of Asterisk's mutexes are
recursive. Benefits include removal of code maintaining the pjsip
non-recursive lock since ao2 objects already know how to maintain their
own lock and the lock will show up in the CLI "core show locks" output.
ASTERISK-25435 #close
Reported by: Dmitriy Serov
Change-Id: I458e131dd1b9816f9e963f796c54136e9e84322d
The default_from_user retrieval function was pulling the
default_from_user from the global configuration struct in an unsafe way.
If using a database as a backend configuration store, the global
configuration struct is short-lived, so grabbing a pointer from it
results in referencing freed memory.
The fix here is to copy the default_from_user value out of the global
configuration struct.
Thanks go to John Hardin for discovering this problem and proposing the
patch on which this fix is based.
ASTERISK-25390 #close
Reported by Mark Michelson
Change-Id: I6b96067a495c1259da768f4012d44e03e7c6148c
When Asterisk sends an outbound SIP request, if there is no direct
reason to place a specific value for the username in the From header,
Asterisk would generate a UUID. For example, this would happen when
sending outbound OPTIONS requests when qualifying or when sending
outbound INVITE requests when originating (if no explicit caller ID were
provided). The issue is that some SIP providers reject these sorts of
requests with a "Name too long" error response.
This patch aims to fix this by changing the default outbound username in
From headers to "asterisk". This value can be overridden by changing the
default_from_user option in the global options if desired.
ASTERISK-25377 #close
Reported by Mark Michelson
Change-Id: I6a4d34a56ff73ff4f661b0075aeba5461b7f3190
When sending a stateful response, creation of the transaction can fail,
most commonly because we are trying to create a transaction from a
retransmitted request. When creation of the transaction fails, we end up
leaking a reference to a contact that was bumped when the response was
created.
This patch adds the missing deref and fixes the reference leak.
Change-Id: I2f97ad512aeb1b17e87ca29ae0abacb4d6395f07
Modules commonly used the pj_gethostip function for retrieving the
IP address of the host. This function does not cache the result and may
result in a DNS lookup occurring, or additional work. If the DNS
server is unreachable or network issues arise this can cause the
pj_gethostip function to block for a period of time.
This change adds an ast_sip_get_host_ip and ast_sip_get_host_ip_string
function which does the same thing but caches the host IP address at
module load time. This results in no additional work being done each
time the local host IP address is needed.
ASTERISK-25342 #close
Change-Id: I3205deb679b01fa5ac05a94b623bfd620a2abe1e
If the saved SUBSCRIBE message is not parseable for whatever reason then
Asterisk could crash when libpjsip tries to parse the message and adds an
error message to the parse error list.
* Made ast_sip_create_rdata() initialize the parse error rdata list. The
list is checked after parsing to see that it remains empty for the
function to return successful.
ASTERISK-25306
Reported by Mark Michelson
Change-Id: Ie0677f69f707503b1a37df18723bd59418085256
The ast_sip_sanitize_xml function is used to sanitize
a string for placement into XML. This is done by examining
an input string and then appending values to an output
buffer. The function used by its implementation, strncat,
has specific behavior that was not taken into account.
If the size of the input string exceeded the available
output buffer size it was possible for the sanitization
function to write past the output buffer itself causing
a crash. The crash would either occur because it was
writing into memory it shouldn't be or because the resulting
string was not NULL terminated.
This change keeps count of how much remaining space is
available in the output buffer for text and only allows
strncat to use that amount.
Since this was exposed by the res_pjsip_pidf_digium_body_supplement
module attempting to send a large message the maximum allowed
message size has also been increased in it.
A unit test has also been added which confirms that the
ast_sip_sanitize_xml function is providing NULL terminated
output even when the input length exceeds the output
buffer size.
ASTERISK-25304 #close
Change-Id: I743dd9809d3e13d722df1b0509dfe34621398302
This change adds support for the 'rtp_timeout' and 'rtp_timeout_hold'
endpoint options. These allow the channel to be hung up if RTP
is not received from the remote endpoint for a specified number of
seconds.
ASTERISK-25259 #close
Change-Id: I3f39daaa7da2596b5022737b77799d16204175b9
This adds an "rtp_keepalive" option for PJSIP endpoints. Similar to the
chan_sip option, this specifies an interval, in seconds, at which we
will send RTP comfort noise frames. This can be useful for keeping RTP
sessions alive as well as keeping NAT associations alive during lulls.
ASTERISK-25242 #close
Reported by Mark Michelson
Change-Id: I3b9903d99e35fe5d0b53ecc46df82c750776bc8d
Corey Farrell
Joshua Colp
Daniel Tryba
Jenkins2
Richard Mudgett
George Joseph
Torrey Searle
Kevin Harwell
Benjamin Keith Ford
Mark Michelson
Alexei Gradinari
Richard Begg
Joshua Elson
Matt Jordan
zuul
Aaron An
Alexander Traud
George Joseph
Daniel Journo