445 Commits (9ac53877f688c06acaa7c377f15da8770e4ee88b)

Author	SHA1	Message	Date
Alexander Traud	9ac53877f6	rtp_engine: Allow more than 32 dynamic payload types. ... Since adding all remaining rates of Signed Linear (ASTERISK-24274), SILK (Gerrit 3136) and Codec 2 (ASTERISK-26217), no RTP Payload Type is left in the dynamic range (96-127). RFC 3551 section 3 allows to reassign other ranges. Consequently, when the dynamic range is exhausted, this change utilizes payload types in the range between 35 and 63 giving room for another 29 payload types. ASTERISK-26311 #close Change-Id: I7bc96ab764bc30098a178b841cbf7146f9d64964	9 years ago
Corey Farrell	d6ad867897	Fix shutdown crash caused by modules being left open. ... It is only safe to run ast_register_cleanup callbacks when all modules have been unloaded. Previously these callbacks were run during graceful shutdown, making it possible to crash during shutdown. ASTERISK-26513 #close Change-Id: Ibfa635bb688d1227ec54aa211d90d6bd45052e21	9 years ago
Corey Farrell	a6e5bae3ef	Remove ASTERISK_REGISTER_FILE. ... ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes all traces of it. Previously exported symbols removed: * __ast_register_file * __ast_unregister_file * ast_complete_source_filename This also removes the mtx_prof static variable that was declared when MTX_PROFILE was enabled. This variable was only used in lock.c so it is now initialized in that file only. ASTERISK-26480 #close Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966	9 years ago
Corey Farrell	8c5c95ad89	core: Remove ABI effects of LOW_MEMORY. ... This allows asterisk to compiled with LOW_MEMORY to load modules built without LOW_MEMORY. ASTERISK-26398 #close Change-Id: I24b78ac9493ab933b11087a8b6794f3c96d4872d	9 years ago
Joshua Colp	57b29f3b69	Merge "logger: Always enable verbose for console channel."	9 years ago
zuul	4caee4a11b	Merge "core: Fix LOW_MEMORY missing symbol ast_pbx_uuid_get."	9 years ago
zuul	f84652bd81	Merge "asterisk.c: Non-root users also get the astcanary after core restart."	9 years ago
Corey Farrell	5cb905a227	core: Fix LOW_MEMORY missing symbol ast_pbx_uuid_get. ... Move the function outside the conditional block that excludes LOW_MEMORY. ASTERISK-26273 #close Change-Id: Ic290fa128222c410c3531107e30efacabc8493b4	9 years ago
Corey Farrell	00f1d05d34	logger: Always enable verbose for console channel. ... Previous versions of Asterisk did not require verbose to be specified in logger.conf for the console channel, if it was requested by command line or asterisk.conf it just worked. This change causes Asterisk to always enable verbose in the console channel level mask. Verbose is displayed on consoles if requested by command line, option_verbose or 'core set verbose'. This also delays initialization of the logger until after threadstorage is initialized. Initializing too early can cause messages to be printed multiple times to the console (stdout). ASTERISK-26391 #close Change-Id: I52187d67c2fcb3efd5561bf04b3e5e23e5ee8a04	9 years ago
zuul	ea8105cf5e	Merge "sd_notify (systemd status notifications) support"	9 years ago
zuul	d36da3a26b	Merge "Fix showing of swap details when sysinfo() is available"	9 years ago
Walter Doekes	0bc9912739	asterisk.c: Non-root users also get the astcanary after core restart. ... Without this change, a 'core restart' would kill the astcanary forever if you're not running as root. Both with and without this patch, the scheduling priority was still SCHED_RR after restart. Additionally, the astcanary is now spawned if you start with high priority and Asterisk doesn't get a chance to lower it. For example through: `chrt -r 10 sudo -u asterisk asterisk -c` Also reap killed astcanary processes on core restart. ASTERISK-26352 #close Change-Id: Iacb49f26491a0717084ad46ed96b0bea5f627a55	9 years ago
Walter Doekes	bffaf46690	asterisk.c: When astcanary dies on linux, reset priority on all threads. ... Previously only the canary checking thread itself had its priority set to SCHED_OTHER. Now all threads are traversed and adjusted. ASTERISK-19867 #close Reported by: Xavier Hienne Change-Id: Ie0dd02a3ec42f66a78303e9c1aac28f7ed9aae39	9 years ago
Tzafrir Cohen	07b95f7c65	sd_notify (systemd status notifications) support ... sd_notify() is used to notify systemd of changes to the status of the process. This allows the systemd daemon to know when the process finished loading (and thus only start another program after Asterisk has finished loading). To use this, use a systemd unit with 'Type=notify' for Asterisk. This commit also adds the function ast_sd_notify(), a wrapper around sd_notify that does nothing if not built with systemd support. Also adds support for libsystemd detection in the configure script. Change-Id: Ied6a59dafd5ef331c5c7ae8f3ccd2dfc94be7811	9 years ago
Timo Teräs	bc81765bb4	Fix showing of swap details when sysinfo() is available ... If sysinfo() is available, but not sysctl() or swapctl() the printing code for swap buffer sizes is incorrectly omitted. The above condition happens with musl c-library. Fix #if rule to consider defined(HAVE_SYSINFO). And also remove the redundant || defined(HAVE_SYSCTL) which was incorrectly there to start with. Now swap information is displayed only if an actual libc function to get it is available. This also fixes warnings previously seen with musl libc: [CC] asterisk.c -> asterisk.o asterisk.c: In function 'handle_show_sysinfo': asterisk.c:773:6: warning: variable 'totalswap' set but not used [-Wunused-but-set-variable] int totalswap = 0; ^~~~~~~~~ asterisk.c:770:11: warning: variable 'freeswap' set but not used [-Wunused-but-set-variable] uint64_t freeswap = 0; ^~~~~~~~ Change-Id: I1fb21dad8f27e416c60f138c6f2bff03fb626eca	9 years ago
Alexei Gradinari	e85adbd947	core: Entity ID is not set or invalid ... The Exchanging Device and Mailbox States could not working if the Entity ID (EID) is not set manually and can't be obtained from ethernet interface. This patch replaces debug message to warning and addes missing description about option 'entityid' to asterisk.conf.sample. With this patch the asterisk also: (1) decline loading the modules which won't work without EID: res_corosync and res_pjsip_publish_asterisk. (2) warn if EID is empty on loading next modules: pbx_dundi, res_xmpp Starting with v197 systemd/udev will automatically assign "predictable" names for all local Ethernet interfaces. This patch also addes some new ethernet prefixes "eno" and "ens". ASTERISK-26164 #close Change-Id: I72d712f1ad5b6f64571bb179c5cb12461e7c58c6	9 years ago
Corey Farrell	9debe1ca26	Run mandatory cleanup when startup fails. ... Errors during startup result in an exit. These error branches should be calling ast_run_atexit(0) to ensure mandatory cleanup is run. ASTERISK-26267 #close Change-Id: If226f2326ae2df7add20040696132214cf2bb680	9 years ago
Corey Farrell	29b0f733a0	Add missing checks during startup. ... This ensures startup is canceled due to allocation failures from the following initializations. * channel.c: ast_channels_init * config_options.c: aco_init ASTERISK-26265 #close Change-Id: I911ed08fa2a3be35de55903e0225957bcdbe9611	9 years ago
George Joseph	8852a4c3db	asterisk.c: Add auto generation and persistence of UUID ... Upcoming features will require the generation and persistence of a UUID. Change-Id: I3ec0062427e133217db6ef496a4216f427c3b92d	9 years ago
Alexander Traud	ac683f13c9	core: Not the configured but granted number of possible file descriptors. ... With CLI "core show settings", simply the parameter maxfiles of the file asterisk.conf was shown. If that parameter was not set, nothing was displayed although the environment might have set a default number itself. Or if maxfiles were not granted (completely), still maxfiles was shown. Now, the maximum number of possible file descriptors in the environment is shown. ASTERISK-26097 Change-Id: I2df5c58863b5007b34b77adbe28b885dfcdf7e0b	9 years ago
Niklas Larsson	8a5c2e736c	core/manager: Add uptime field to FullyBooted ... Add Uptime and LastReload to event FullyBooted. ASTERISK-26058 #close Reported by: Niklas Larsson Change-Id: I909b330801c0990d78df9b272ab0adc95aecb15e	9 years ago
Matt Jordan	3522376512	logger: Support JSON logging with Verbose messages ... When 2d7a4a3357 was merged, it missed the fact that Verbose log messages are formatted and handled by 'verbosers'. Verbosers are registered functions that handle verbose messages only; they exist as a separate class of callbacks. This was done to handle the 'magic' that must be inserted into Verbose messages sent to remote consoles, so that the consoles can format the messages correctly, i.e., the leading tabs/characters. In reality, verbosers are a weird appendage: they're a separate class of formatters/message handlers outside of what handles all other log messages in Asterisk. After some code inspection, it became clear that simply passing a Verbose message along with its 'sublevel' importance through the normal logging mechanisms removes the need for verbosers altogether. This patch removes the verbosers, and makes the default log formatter aware that, if the log channel is a console log, it should simply insert the 'verbose magic' into the log messages itself. This allows the console handlers to interpret and format the verbose message themselves. This simplifies the code quite a lot, and should improve the performance of printing verbose messages by a reasonable factor: (1) It removes a number of memory allocations that were done on each verobse message (2) It removes the need to strip the verbose magic out of the verbose log messages before passing them to non-console log channels (3) It now performs fewer iterations over lists when handling verbose messages Since verbose messages are now handled like other log messages (for the most part), the JSON formatting of the messages works as well. ASTERISK-25425 Change-Id: I21bf23f0a1e489b5102f8a035fe8871552ce4f96	9 years ago
George Joseph	216abb0ae7	lock: Add named lock capability ... Locking some objects like sorcery objects can be tricky because the underlying ao2 object may not be the same for all callers. For instance, two threads that call ast_sorcery_retrieve_by_id on the same aor name might actually get 2 different ao2 objects if the underlying wizard had to rehydrate the aor from a database. Locking one ao2 object doesn't have any effect on the other even if those objects had locks in the first place. Named locks allow access control by keyspace and key strings. Now an "aor" named "1000" can be locked and any other thread attempting to lock "aor" "1000" will wait regardless of whether the underlying ao2 object is the same or not. Mutex and rwlocks are supported. This capability will initially be used to lock an aor when multiple threads may be attempting to prune expired contacts from it. Change-Id: If258c0b7f92b02d07243ce70e535821a1ea7fb45	9 years ago
Mark Michelson	89e94e886c	Restrict CLI/AMI commands on shutdown. ... During stress testing, we have frequently seen crashes occur because a CLI or AMI command attempts to access information that is in the process of being destroyed. When addressing how to fix this issue, we initially considered fixing individual crashes we observed. However, the changes required to fix those problems would introduce considerable overhead to the nominal case. This is not reasonable in order to prevent a crash from occurring while Asterisk is already shutting down. Instead, this change makes it so AMI and CLI commands cannot be executed if Asterisk is being shut down. For AMI, this is absolute. For CLI, though, certain commands can be registered so that they may be run during Asterisk shutdown. ASTERISK-25825 #close Change-Id: I8887e215ac352fadf7f4c1e082da9089b1421990	9 years ago
George Joseph	3173e91bab	build-system: Allow building with static pjproject ... Background here: http://lists.digium.com/pipermail/asterisk-dev/2016-January/075266.html From CHANGES: * To help insure that Asterisk is compiled and run with the same known version of pjproject, a new option (--with-pjproject-bundled) has been added to ./configure. When specified, the version of pjproject specified in third-party/versions.mak will be downloaded and configured. When you make Asterisk, the build process will also automatically build pjproject and Asterisk will be statically linked to it. Once a particular version of pjproject is configured and built, it won't be configured or built again unless you run a 'make distclean'. To facilitate testing, when 'make install' is run, the pjsua and pjsystest utilities and the pjproject python bindings will be installed in ASTDATADIR/third-party/pjproject. The default behavior remains building with the shared pjproject installation, if any. Building: All you have to do is include the --with-pjproject-bundled option on the ./configure command line (and remove any existing --with-pjproject option if specified). Everything else is automatic. Behind the scenes: The top-level Makefile was modified to include 'third-party' in the list of MOD_SUBDIRS. The third-party directory was created to contain any third party packages that may be needed in the future. Its Makefile automatically iterates over any subdirectories passing on targets. The third-party/pjproject directory was created to house the pjproject source distribution. Its Makefile contains targets to download, patch configure, generate dependencies, compile libs, apps and python bindings, sanitized build.mak and generate a symbols list. When bootstrap.sh is run, it automatically includes the configure.m4 file in third-party/pjproject. This file has a macro to download and conifgure pjproject and get and set PJPROJECT_INCLUDE, PJPROJECT_DIR and PJPROJECT_BUNDLED. It also tests for the capabilities like PJ_TRANSACTION_GRP_LOCK by parsing preprocessor output as opposed to trying to compile. Of course, bootstrap.sh is only run once and the configure file is incldued in the patch. When configure is run with the new options, the macro in configure.m4 triggers the download, patch, conifgure and tests. No compilation is performed at this time. The downloaded tarball is cached in /tmp so it doesn't get downloaded again on a distclean. When make is run in the top-level Asterisk source directory, it will automatically descend all the subdirectories in third_party just as it does for addons, apps, etc. The top-level Makefile makes sure that the 'third-party' is built before 'main' so that dependencies from the other directories are built first. When main does build, a new shared library (libasteriskpj) is created that links statically to the pjproject .a files and exports all their symbols. The asterisk binary links to that, just as it does with libasteriskssl. When Asterisk is installed, the pjsua and pjsystest apps, and the pjproject python bindings are installed in ASTDATADIR/third-party/pjproject. This will facilitate testing, including running the testsuite which will be updated to check that directory for the pjsua module ahead of the system python library. Modules should continue to depend on pjproject if they use pjproject APIs directly. They should not care about the implementation. No changes to any res_pjsip modules were made. Change-Id: Ia7a60c28c2e9ba9537c5570f933c1ebcb20a3103	9 years ago
Diederik de Groot	b259ac95ac	main/asterisk.c: ast_el_read_char ... Make sure buf[res] is not accessed at res=-1 (buffer underrun). Address Sanitizer will complain about this quite loudly. ASTERISK-24801 #close Change-Id: Ifcd7f691310815a31756b76067c56fba299d3ae9	9 years ago
Joshua Colp	c8e786ff66	Merge topic 'pbx-split' ... * changes: main/pbx: Move hangup handler routines to pbx_hangup_handler.c. main/pbx: Move dialplan application management routines to pbx_app.c. main/pbx: Move switch routines to pbx_switch.c.	9 years ago
Matt Jordan	f3a052667e	Merge "main/pbx: Move variable routines to pbx_variables.c."	9 years ago
Corey Farrell	36f1eaf0b5	main/pbx: Move hangup handler routines to pbx_hangup_handler.c. ... This is the sixth patch in a series meant to reduce the bulk of pbx.c. This moves hangup handler management functions to their own source. Change-Id: Ib25a75aa57fc7d5c4294479e5cc46775912fb104	9 years ago
Corey Farrell	3507494b8a	main/pbx: Move dialplan application management routines to pbx_app.c. ... This is the sixth patch in a series meant to reduce the bulk of pbx.c. This moves dialplan application management functions to their own source. Change-Id: I444c10fb90a3cdf9f3047605d6a8aad49c22c44c	9 years ago
Corey Farrell	54a8f1a396	main/pbx: Move switch routines to pbx_switch.c. ... This is the fifth patch in a series meant to reduce the bulk of pbx.c. This moves ast_switch functions to their own source. Change-Id: Ic2592a18a5c4d8a3c2dcf9786c9a6f650a8c628e	9 years ago
Corey Farrell	5ee5c3739e	main/pbx: Move variable routines to pbx_variables.c. ... This is the third patch in a series meant to reduce the bulk of pbx.c. This moves channel and global variable routines to their own source. Change-Id: Ibe8fb4647db11598591d443a99e3f99200a56bc6	9 years ago
Corey Farrell	f9bfc2450e	main/pbx: Move custom function routines to pbx_functions.c. ... This is the second patch in a series meant to reduce the bulk of pbx.c. This moves custom function management routines to their own source. Change-Id: I34a6190282f781cdbbd3ce9d3adeac3c3805e177	9 years ago
Rodrigo Ramírez Norambuena	3fd528dddf	Happy new year 2016. ... Change-Id: I22d3c90f6f27df82e915bbf81c1d91221f7a945e	9 years ago
George Joseph	5e67e51c6a	main/pbx: Move pbx_builtin dialplan applications to pbx_builtins.c ... We joked about splitting pbx.c into multiple files but this first step was fairly easy. All of the pbx_builtin dialplan applications have been moved into pbx_builtins.c and a new pbx_private.h file was added. load_pbx_builtins() is called by asterisk.c just after load_pbx(). A few functions were renamed and are cross-exposed between the 2 source files. Change-Id: I87066be3dbf7f5822942ac1449d98cc43fc7561a	9 years ago
Walter Doekes	03759c5587	main: Slight refactor of main. Improve color situation. ... Several issues are addressed here: - main() is large, and half of it is only used if we're not rasterisk; fixed by spliting up the daemon part into a separate function. - Call ast_term_init from rasterisk as well. - Remove duplicate code reading/writing asterisk history file. - Attempt to tackle background color issues and color changes that occur. Tested by starting asterisk -c until the colors stopped changing at odd locations. - Remove unused term_prep() and term_prompt() functions. ASTERISK-25585 #close Change-Id: Ib641a0964c59ef9fe6f59efa8ccb481a9580c52f	10 years ago
Corey Farrell	b0bf189908	Fix cli display of build options. ... A previous commit reduced the AST_BUILDOPTS compiler define to only include options that affected ABI. This included some options that were previously displayed by cli "core show settings". This change corrects the CLI display while still restricting buildopts.h to ABI effecting options only. ASTERISK-25434 #close Reported by: Rusty Newton Change-Id: Id07af6bedd1d7d325878023e403fbd9d3607e325	10 years ago
Matthew Jordan	3ea0d38396	media cache: Add a core API and facade for a backend agnostic media cache ... This patch adds a new API to the Asterisk core that acts as a media cache. The core API itself is mostly a thin wrapper around some bucket API provided implementation that itself acts as the mechanism of retrieval for media. The media cache API in the core provides the following: * A very thin in-memory cache of the active bucket_file items. Unlike a more traditional cache, it provides no expiration mechanisms. Most queries that hit the in-memory cache will also call into the bucket implementations as well. The bucket implementations are responsible for determining whether or not the active record is active and valid. This makes sense for the most likely implementation of a media cache backend, i.e., HTTP. The HTTP layer itself is the actual arbiter of whether or not a record is truly active; as such, the in-memory cache in the core has to defer to it. * The ability to create new items in the media cache from local resources. This allows for re-creation of items in the cache on restart. * Synchronization of items in the media cache to the AstDB. This also includes various pieces of important metadata. The API provides sufficient access that higher level APIs, such as the file or app APIs, do not have to worry about the semantics of the bucket APIs when needing to playback a resource. In addition, this patch provides unit tests for the media cache API. The unit tests use a fake bucket backend to verify correctness. Change-Id: I11227abbf14d8929eeb140ddd101dd5c3820391e	10 years ago
Ashley Sanders	3cdfd39af7	DNS: Create a system-level DNS resolver ... Prior to this patch, the DNS core present in master had no default system-level resolver implementation. Therefore, it was not possible for the DNS core to perform resolutions unless the libunbound library was installed and the res_resolver_unbound module was loaded. This patch introduces a system-level DNS resolver implementation that will register itself with the lowest consideration priority available (to ensure that it is to be used only as a last resort). The resolver relies on low-level DNS search functions to perform a rudimentary DNS search based on a provided query and then supplies the search results to the DNS core. ASTERISK-25146 #close Reported By: Joshua Colp Change-Id: I3b36ea17b889a98df4f8d80d50bb7ee175afa077	10 years ago
Corey Farrell	57386dcb67	Allow command-line options to override asterisk.conf. ... Previous versions of Asterisk processed command-line options before processing asterisk.conf. This meant that if an option was set in asterisk.conf, it could not be overridden with the equivelent command line option. This change causes Asterisk to process the command-line twice. First it processes options that are needed to load asterisk.conf, then it processes the remaining options after the config is read. This changes the function of -X slightly. Previously using -X without disabling execincludes in asterisk.conf caused #exec to be usable in any config. Now -X only enables #exec for the load of asterisk.conf, if it is wanted in the rest of the system it must be enabled with execincludes in asterisk.conf. Updated 'asterisk -h' and 'man asterisk' to reflect the limited function of -X. ASTERISK-25042 #close Reported by: Corey Farrell Change-Id: I1450d45c15b4467274b871914d893ed4f6564cd7	10 years ago
Corey Farrell	cc853dcf90	Fix processing of asterisk.conf debug=yes. ... The code which reads asterisk.conf supports processing the debug option with ast_true, but ast_true returns -1. This causes debug to still be off, convert to 1 so debug will be on as requested. ASTERISK-25042 Reported by: Corey Farrell Change-Id: I3c898b7d082d914b057e111b9357fde46bad9ed6	10 years ago
Rodrigo Ramírez Norambuena	94532b2c22	main/asterisk.c: Update Asterisk copyright year ... Change-Id: I5e75d7f7e2c096d74edd9e8735268a894f4b93ab	10 years ago
Corey Farrell	8f3cee1258	Astobj2: Fix initialization order of refdebug and AO2_DEBUG. ... This ensures that refdebug is initialized before AO2_DEBUG if both are enabled, since AO2_DEBUG allocates a container. This change also makes AO2_DEBUG initialization critical, a failure will abort Asterisk startup. This is needed since the failure would be caused by reg_containers allocation failure, and that would result in a segmentation fault by ao2_container_register later in startup. ASTERISK-25048 #close Reported by: Corey Farrell Change-Id: I9a243ea3fc5653b48b931ba6d61971cb2e530244	10 years ago
Corey Farrell	5c1d07baf0	Astobj2: Allow reference debugging to be enabled/disabled by config. ... * The REF_DEBUG compiler flag no longer has any effect on code that uses Astobj2. It is used to determine if reference debugging is enabled by default. Reference debugging can be enabled or disabled in asterisk.conf. * Caller information is provided in logger errors for ao2 bad magic numbers. * Optimizes AO2 by merging internal functions with the public counterpart. This was possible now that we no longer require a dual ABI. ASTERISK-24974 #close Reported by: Corey Farrell Change-Id: Icf3552721fe999365ba8a8cf00a965aa6b897cc1	10 years ago
Matt Jordan	4a58261694	git migration: Refactor the ASTERISK_FILE_VERSION macro ... Git does not support the ability to replace a token with a version string during check-in. While it does have support for replacing a token on clone, this is somewhat sub-optimal: the token is replaced with the object hash, which is not particularly easy for human consumption. What's more, in practice, the source file version was often not terribly useful. Generally, when triaging bugs, the overall version of Asterisk is far more useful than an individual SVN version of a file. As a result, this patch removes Asterisk's support for showing source file versions. Specifically, it does the following: * Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and remove passing the version in with the macro. Other facilities than 'core show file version' make use of the file names, such as setting a debug level only on a specific file. As such, the act of registering source files with the Asterisk core still has use. The macro rename now reflects the new macro purpose. * main/asterisk: - Refactor the file_version structure to reflect that it no longer tracks a version field. - Remove the "core show file version" CLI command. Without the file version, it is no longer useful. - Remove the ast_file_version_find function. The file version is no longer tracked. - Rename ast_register_file_version/ast_unregister_file_version to ast_register_file/ast_unregister_file, respectively. * main/manager: Remove value from the Version key of the ModuleCheck Action. The actual key itself has not been removed, as doing so would absolutely constitute a backwards incompatible change. However, since the file version is no longer tracked, there is no need to attempt to include it in the Version key. * UPGRADE: Add notes for: - Modification to the ModuleCheck AMI Action - Removal of the "core show file version" CLI command Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e	10 years ago
George Joseph	9a63ada03a	loader/main: Don't set ast_fully_booted until deferred reloads are processed ... Until we have a true module management facility it's sometimes necessary for one module to force a reload on another before its own load is complete. If Asterisk isn't fully booted yet, these reloads are deferred. The problem is that asterisk reports fully booted before processing the deferred reloads which means Asterisk really isn't quite ready when it says it is. This patch moves the report of fully booted after the processing of the deferred reloads is complete. Since the pjsip stack has the most number of related modules, I ran the channels/pjsip testsuite to make sure there aren't any issues. All tests passed. Tested-by: George Joseph Review: https://reviewboard.asterisk.org/r/4604/ ........ Merged revisions 434544 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434546 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Corey Farrell	3ddd92902a	Replace most uses of ast_register_atexit with ast_register_cleanup. ... Since 'core stop now' and 'core restart now' do not stop modules, it is unsafe for most of the core to run cleanups. Originally all cleanups used ast_register_atexit, and were only changed when it was shown to be unsafe. ast_register_atexit is now used only when absolutely required to prevent corruption and close child processes. Exceptions that need to use ast_register_atexit: * CDR: Flush records. * res_musiconhold: Kill external applications. * AstDB: Close the DB. * canary_exit: Kill canary process. ASTERISK-24142 #close Reported by: David Brillert ASTERISK-24683 #close Reported by: Peter Katzmann ASTERISK-24805 #close Reported by: Badalian Vyacheslav ASTERISK-24881 #close Reported by: Corey Farrell Review: https://reviewboard.asterisk.org/r/4500/ Review: https://reviewboard.asterisk.org/r/4501/ ........ Merged revisions 433495 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 433497 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433498 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Matthew Jordan	66670f02e6	Fix compilation issues for OpenBSD ... This patch addresses compilation issues for OpenBSD. Specifically, it addresses: * It allows including <sys/vmmeter.h> in asterisk.c * Provides a needed (size_t) cast in xmldoc.c In 13+, it also addresses a conditional inclusion in loader.c. Review: https://reviewboard.asterisk.org/r/4506 ASTERISK-24880 #close Reported by: snuffy Tested by: snuffy patches: misc-openbsd.diff uploaded by snuffy (License 5024) ........ Merged revisions 433245 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 433247 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433248 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Scott Griepentrog	8c65c9167e	Various: bugfixes found via chaos ... Using DEBUG_CHAOS several instances of a null pointer crash, and one uninitialized variable were uncovered and fixed. Also added details on why Asterisk failed to initialize. Review: https://reviewboard.asterisk.org/r/4468/ ........ Merged revisions 433064 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433065 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago
Corey Farrell	bb71672a47	main/asterisk.c: Reverse #if statement in listener() to fix code folding. ... listener() opens the same code block in two places (#if and #else). This confuses some folding editors causing it to think that an extra code block was opened. Folding in 'geany' causes all code after listener() to be folded as if it were part of that procedure. ASTERISK-24813 #close Reported by: Corey Farrell Review: https://reviewboard.asterisk.org/r/4435/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432057 65c4cc65-6c06-0410-ace0-fbb531ad65f3	10 years ago