An earlier contributor apparently forgot to run 'make ari-stubs'
before committing after making ARI model changes.
Change-Id: I7813e5638e2821d11f4b968dc2aeab4f725190a6
Reset the internal counter that the AEL2 compiler uses for unique label
names before compiling. This keeps dialplan labels consistent across
reloads assuming the AEL2 has not changed.
ASTERISK-17799 #close
Reported by: Kirill Katsnelson
Change-Id: I30b3cc887d1ee0644d3f341e2fef16f525d7fae5
In AEL2, if a 'for' statement contains macro* calls, like:
for (&iterator(${TRY},A); "${A}" != ""; &iterate(A)) {
The AEL2 parser will translate these into calls to the deprecated Macro
dialplan application and use the antiquated pipe delimiter.
Instead, convert these into calls to the Gosub dialplan application and
use commas as argument separators.
ASTERISK-18593 #close
Reported by: Luke-Jr
* 'macro' in this context means AEL2 macros, not the 'Macro' application
Change-Id: I3d73716033b8e3e42e0209d355bf5f10c97045fc
When generating the regular expression that matches against existing
extensions, we need to escape literal characters that can also be
regular expression metacharacters. This was already being done for '*'
but we need to do the same for '+'.
In passing, remove some unreachable code - strcmp() is already run
immediately when entering extension_matches().
ASTERISK-14939 #close
Reported by: klaus3000
Change-Id: I8d2cccb3479168fba1b0a6704c52198b396468f1
REMB's exponent is 6-bits (0..63) and has a mantissa of 18-bits. We were using
an unsigned integer to represent the bitrate. However, that type is not large
enough to hold all potential bitrate values. If the bitrate is large enough
bits were being shifted off the "front" of the mantissa, which caused the
wrong value to be sent to the browser.
This patch makes it so it now uses a float type to hold the bitrate. Using a
float allows for all bitrate values to be correctly represented.
ASTERISK-28255
Change-Id: Ice00fdd16693b16b41230664be5d9f0e465b239e
It looks like we're not properly calculating jitter values on received
video streams. This patch enables the code that does jitter calculations
for those streams.
Change-Id: Iaac985808829c8f034db8c57318789c4c8c11392
It was difficult to check the channel's current application and
parameters using ARI for current channels. Added app_name, app_data
items to show the current application information.
ASTERISK-28343
Change-Id: Ia48972b3850e5099deab0faeaaf51223a1f2f38c
If Realtime @ variable value is NULL or empty or contains only whitespaces
then when we try to retrieve it using PJSIP_ENDPOINT we get WARNING
pjsip_endpoint_function_read: Unknown property @my_var for PJSIP endpoint.
And the variable is missing in the result of CLI pjsip show endpoint.
This patch keeps empty sorcery extended field.
ASTERISK-28341 #close
Change-Id: I221fccc04cbfa2be17ce971f64ae0e74e465eea0
Because StasisEnd's timestamp created it's own timestamp, it makes
wrong timestamp, compare to other channel event(ChannelDestroyed).
Fixed to getting a timestamp from the Channel's timestamp.
ASTERISK-28333
Change-Id: I5eb8380fc472f1100535a6bc4983c64767026116
As part of an earlier voicemail refactor, ast_delete_mwi_state_full
was modified to remove the pool topic for a mailbox when the state
was deleted. This was an attempt to prevent stale topics from
accumulating when app_voicemail was reloaded and a mailbox went
away. Unfortunately because of the fact that when app_voicemail
reloads, ALL mailboxes are deleted then only current ones recreated,
topics were being removed from the pool that still had subscribers
on them, then recreated as new topics of the same name. So now
modules like res_pjsip_mwi are listening on a topic that will
never receive any messages because app_voicemail is publishing on
a different topic that happens to have the same name. The solutiuon
to this is not easy and given that accumulating topics for
deleted mailboxes is less evil that not sending NOTIFYs...
* Removed the call to stasis_topic_pool_delete_topic in
ast_delete_mwi_state_full.
Also:
* Fixed a topic reference leak in res_pjsip_mwi
mwi_stasis_subscription_alloc.
* Added some debugging to mwi_stasis_subscription_alloc,
stasis_topic_create, and topic_dtor.
* Fixed a topic reference leak in an error path in
internal_stasis_subscribe.
ASTERISK-28306
Reported-by: Jared Hull
Change-Id: Id7da0990b3ac4be4b58491536b35f41291247b27
Added ARI resource for channel statistics.
GET /ari/channels/{channelId}/rtp_statistics : It returns given
channel's rtp statistics detail.
ASTERISK-28320
Change-Id: I4343eec070438cec13f2a4f22e7fd9e574381376
Changed to requirement to having timestamp for all of ARI events.
The below ARI events were changed to having timestamp.
PlaybackStarted, PlaybackContinuing, PlaybackFinished,
RecordingStarted, RecordingFinished, RecordingFailed,
ApplicationReplaced, ApplicationMoveFailed
ASTERISK-28326
Change-Id: I382c2fef58f5fe107e1074869a6d05310accb41f
Topic names now follow: <subsystem>:<functionality>[/<object>]
This ensures that they are all unique, and also provides better
insight in to what each topic is for.
Subscriber ids now also use the main topic name they are
subscribed to and an incrementing integer as their identifier to
make it easier to understand what the subscription is primarily
responsible for.
Both the CLI commands for listing topic and subscription statistics
now sort to make it a bit easier to see what is going on.
Subscriptions will now show all topics that they are receiving messages
from, not just the main topic they were subscribed to.
ASTERISK-28335
Change-Id: I484e971a38c3640f2bd156282e532eed84bf220d
Currently, when the Asterisk calculates rtp statistics, it uses
sample_count as a unsigned integer parameter. This would be fine
for most of cases, but in case of large enough number of sample_count,
this might be causing the divide by zero error.
ASTERISK-28321
Change-Id: If7e0629abaceddd2166eb012456c53033ea26249
chan_sip will always ignore 183 responses that do not contain SDP
however, chan_pjsip will currently always translate it into a
183 with SDP. This new flag allows chan_pjsip to have the same
behavior as chan_sip.
ASTERISK-28322 #close
Change-Id: If81cfaa17c11b6ac703e3d71696f259d86c6be4a
strtok() uses a static buffer, making it not thread safe.
Also add a #define to cause a compile failure if strtok is used.
Change-Id: Icce265153e1e65adafa8849334438ab6d190e541
Added the ability to move between Stasis applications within Stasis.
This can be done by calling 'move' in an application, providing (at
minimum) the channel's id and the application to switch to. If the
application is not registered or active, nothing will happen and the
channel will remain in the current application, and an event will be
triggered to let the application know that the move failed. The event
name is "ApplicationMoveFailed", and provides the "destination" that the
channel was attempting to move to, as well as the usual channel
information. Optionally, a list of arguments can be passed to the
function call for the receiving application. A full example of a 'move'
call would look like this:
client.channels.move(channelId, app, appArgs)
The control object used to control the channel in Stasis can now switch
which application it belongs to, rather than belonging to one Stasis
application for its lifetime. This allows us to use the same control
object instead of having to tear down the current one and create
another.
ASTERISK-28267 #close
Change-Id: I43d12b10045a98a8d42541889b85695be26f288a
This small feature will help to checking the bridge's status to
figure out which bridge is in old/zombie or not. Also added
detail items for the 'bridge show *' cli to provide more detail
info. And added creation item to the ARI as well.
ASTERISK-28279
Change-Id: I460238c488eca4d216b9176576211cb03286e040
PJSIP assumes that these header names are not allocated, and does not
clone the name strings when reusing headers.
Block unload of res_pjsip_diversion until shutdown to ensure static
memory stays valid.
ASTERISK-28312 #close
Change-Id: Ibd6ea55ec4a604bbd43ac07f8d0b54da2c39b8b9
Rather than calling ast_odbc_find_table() in the prepare callback, call
it beforehand and pass it in to the callback to avoid the need for a
second connection.
ASTERISK-28166 #close
Change-Id: I6f8a0b9990d636fd6bc1a92ed70f7050d2436202
apply_negotiated_sdp_stream was returning a "1" when no joint
capabilities were found on an outgoing call instead of a "-1".
This indicated to res_pjsip_session that the handler DID handle
the sdp when in fact it didn't. Without the appropriate setup,
a subsequent media frame coming in would have an invalid stream_num
and cause a seg fault when the stream was attempted to be retrieved.
apply_negotiated_sdp_stream now returns the correct "-1" and any
media is now discarded before it reaches the core stream processing.
ASTERISK-28260
Reported by: Sotiris Ganouris
Change-Id: Ia095cb16b4862f2f6ad6d2d2a77453fa2542371f
This reverts commit d524ad523d.
Reason for revert: This causes Contact and Via headers to have the wrong
transport address.
ASTERISK-28309 #close
Change-Id: Ibba4d6176f68e39279fcd9a545f81d56e747bed8
If both send_registrations and send_auth are both set to yes,
outbound_auth/username must be set or we crash.
ASTERISK-27992 #close
Change-Id: I6418d56de1ae53f80393b314c2584048fbf7f11d
When a contact was removed by the registrar it did not always check to see if
the circumstances involved a monitored reliable transport. For instance, if the
'remove_existing' option was set to 'true' then when existing contacts were
removed due to 'max_contacts' being reached, those existing contacts being
removed did not unregister the transport monitor.
Also, it was possible to add more than one monitor on a reliable transport for
a given aor and contact.
This patch makes it so all contact removals done by the registrar also remove
any associated transport monitors if necessary. It also makes it so duplicate
monitors cannot be added for a given transport.
ASTERISK-28213
Change-Id: I94b06f9026ed177d6adfd538317c784a42c1b17a
This module allows presence subscriptions to voicemail boxes. This
allows common BLF keys to act as voicemail waiting indicators.
ASTERISK-28301
Change-Id: I62a246c24f3d7d432e33e22d7a4a57c15c292fdd
Delivery timeval in the smoother object will fall behind while a DTMF is
being generated. This can eventually lead to invalid rtp timestamps.
To prevent this from happening the smoother needs to be reset after every
DTMF to keep the timing up to date.
ASTERISK-28303 #close
Change-Id: Iaba3f7b428ebd72a4caa90e13b829ab4f088310f
When listing the applications the apps lock was incorrectly
locked twice instead of being locked and then unlocked.
ASTERISK-28302
Change-Id: If7d064592a9e88c0f1049214c50e02be6dabf79e
When processing SSRC attributes we were iterating through
all of them, even though we only need to know the remote
SSRC once. This was problematic because some browsers group
SSRCs together on a stream, and due to our negotiation only
end up using the first one. Since we set the second one as
the remote SSRC we would drop the received media from them
instead of allowing it through.
In the future this may be extended to allow SSRC groups
and to use information from the attributes.
Change-Id: I4dc87087dbe56a83aa65f0f897bbd4ca75ec1270
To prevent one subsystem's taskprocessors from causing others
to stall, new capabilities have been added to taskprocessors.
* Any taskprocessor name that has a '/' will have the part
before the '/' saved as its "subsystem".
Examples:
"sorcery/acl-0000006a" and "sorcery/aor-00000019"
will be grouped to subsystem "sorcery".
"pjsip/distributor-00000025" and "pjsip/distributor-00000026"
will bn grouped to subsystem "pjsip".
Taskprocessors with no '/' have an empty subsystem.
* When a taskprocessor enters high-water alert status and it
has a non-empty subsystem, the subsystem alert count will
be incremented.
* When a taskprocessor leaves high-water alert status and it
has a non-empty subsystem, the subsystem alert count will be
decremented.
* A new api ast_taskprocessor_get_subsystem_alert() has been
added that returns the number of taskprocessors in alert for
the subsystem.
* A new CLI command "core show taskprocessor alerted subsystems"
has been added.
* A new unit test was addded.
REMINDER: The taskprocessor code itself doesn't take any action
based on high-water alerts or overloading. It's up to taskprocessor
users to check and take action themselves. Currently only the pjsip
distributor does this.
* A new pjsip/global option "taskprocessor_overload_trigger"
has been added that allows the user to select the trigger
mechanism the distributor uses to pause accepting new requests.
"none": Don't pause on any overload condition.
"global": Pause on ANY taskprocessor overload (the default and
current behavior)
"pjsip_only": Pause only on pjsip taskprocessor overloads.
* The core pjsip pool was renamed from "SIP" to "pjsip" so it can
be properly grouped into the "pjsip" subsystem.
* stasis taskprocessor names were changed to "stasis" as the
subsystem.
* Sorcery core taskprocessor names were changed to "sorcery" to
match the object taskprocessors.
Change-Id: I8c19068bb2fc26610a9f0b8624bdf577a04fcd56
Event type filtering is now enabled, and configurable per application. An app is
now able to specify which events are sent to the application by configuring an
allowed and/or disallowed list(s). This can be done by issuing the following:
PUT /applications/{applicationName}/eventFilter
And then enumerating the allowed/disallowed event types as a body parameter.
ASTERISK-28106
Change-Id: I9671ba1fcdb3b6c830b553d4c5365aed5d588d5b
p2p_write updates txformat but doesn't require a smoother. If a smoother
was created by another bridge type the smoother could fall out of date causing
one way audio issues. To prevent this the smoother is now destroyed on the
start of native bridge.
ASTERISK-28284 #close
Change-Id: I84e67f144963787fff9b4d79ac500514fb40cdc6
Currently, the Asterisk's pjsip_session module does not keeping the
rtcp's stats info after it was removed. But by adding the results
vector and keeping it until session is destroying, it can give more
useful information for other modules.
ASTERISK-28253
Change-Id: Ib25c2d3fc4da084aecfde2a82c1b1d733bd64fa5
A previous patch attempt to mitigate blocked threads on transport shutdown for
a given contact. It was thought that a second lock could be avoided by checking
the 'removing' flag on the transport monitor twice (once before and once after
the normal named aor locking). However as with usual threading issues if the
timing was right the original problem still occured.
This patch adds locking around the first 'removing' flag check and set, thus
nullifying the secondary check, so it was removed.
ASTERISK-28213
Change-Id: Iaa8e36e5311789549b76d8de42dfcea96013b2ed
When Asterisk is connected and used with a database the response
time of the database can cause problems in Asterisk if it is long.
Normally the only way to see this problem would be to retrieve a
backtrace from Asterisk and examine where things are blocked, or
examine the database to see if there is any indication of a
problem.
This change adds some basic query logging to make it easier to
investigate such a problem. When logging is enabled res_odbc will
now keep track of the number of queries executed, as well as the
query that has taken the longest time to execute. There is also
an option which will cause a WARNING message to be output if a
query takes longer than a configurable amount of time to execute.
This makes it easier and clearer for users that their database may
be experiencing a problem that could impact Asterisk.
ASTERISK-28277
Change-Id: I173cf4928b10754478a6a8c27dfa96ede0f058a6
At AstriCon, there was a strong desire for the ability to completely
bypass dialplan when using ARI. This is possible through the automatic
creation of a context and a couple of extensions whenever an application
is started.
For example, if you have an application named 'ari-example', a context
named 'stasis-ari-example' will be automatically created whenever this
application is started as long as one does not already exist. Two
extensions (a match-all extension for Stasis and a 'h' extension) are
created within this context. Any endpoint that registers to Asterisk
within this context will send all calls to the corresponding Stasis
application. When the application is destroyed, the context is removed.
ASTERISK-28104 #close
Change-Id: Ie35bd93075e05b05e3ae129a83c9426931b7ebac
Added ARI resource.
GET /ari/asterisk/ping : It returns "pong" message with timestamp
and asterisk id. It would be useful for simple heath check.
Change-Id: I8d24e1dcc96f60f73437c68d9463ed746f688b29
The context specified by 'regcontext' was not being created, so when Asterisk
attempted to later dynamically add an extension it would fail. This patch now
creates the context if a 'regcontext' is specified.
ASTERISK-28238
Change-Id: I0f36cf4ab0a93ff4b1cc5548d617ecfd45e09265
Testing revealed that the cache added no benefit but that it could
consume excessive memory.
Two new index related functions were created:
ast_sounds_get_index_for_file() and ast_media_index_update_for_file()
which restrict index updating to specific sound files.
The original ast_sounds_get_index() and ast_media_index_update()
calls are still available but since they no longer cache the results
internally, developers should re-use an index they may already have
instead of calling ast_sounds_get_index() repeatedly. If information
for only a single file is needed, ast_sounds_get_index_for_file()
should be called instead of ast_sounds_get_index().
The media_index directory scan code was elimininated in favor of
using the existing ast_file_read_dirs() function.
Since there's no more cache, ast_sounds_index_init now only
registers the sounds cli commands instead of generating the
initial index and subscribing to stasis format register/unregister
messages.
"sounds" is no longer a valid target for the "module reload"
command.
Both the sounds cli commands and the sounds ari resources were
refactored to only call ast_sounds_get_index() once per invocation
and to use ast_sounds_get_index_for_file() when a specific sound
file is requested.
Change-Id: I1cef327ba1b0648d85d218b70ce469ad07f4aa8d
Control frames (PING / PONG / CLOSE) can be received in the middle of a
fragmented message. In order to ensure they do not interfere with the
reassembly buffer, we exit early and do not return the payload to the
caller.
ASTERISK-28257 #close
Change-Id: Ia5367144fe08ac6141bba3309517a48ec7f013bc
When a reliable transport is shutdown it's possible for the pjsip registrar
resource shutdown handler to get called multiple times. If this happens and one
of the threads is taking "too long" (slow database call for instance) then the
others get blocked waiting to delete.
Since it only takes one to delete the contact then the other threads should be
able to continue on if one of the threads is currently "deleting". This patch
makes it so now when a thread enters the shutdown handler it checks to see if a
thread is currently already "deleting". If so, then the thread does not attempt
to get the lock, and instead continues on thus avoiding the blockage.
ASTERISK-28213 #close
Change-Id: I7563ca596312b1dff4f3ab41483e89fe2862328a
To avoid the stream name collide if there're more than one video track
in one client. If client has multi video tracks, the name of ast_stream
which represents each video track may be the same. Use the MSID:LABEL
here because it's identifiable.
ASTERISK-28196 #close
Reported-by: xiemchen
Change-Id: Ib62b2886e8d3a30e481d94616b0ceaeab68a870b
This ensures that Asterisk responds properly to frames received from a
client with opcode 8 (CLOSE) by echoing back the status code in its own
CLOSE frame.
Handling of the CLOSE opcode is moved up with the rest of the opcodes so
that unmasking gets applied. The payload is no longer returned to the
caller, but neither ARI nor the chan_sip nor pjsip made use of the
payload, which is a good thing since it was masked.
ASTERISK-28231 #close
Change-Id: Icb1b60205fc77ee970ddc91d1f545671781344cf
The transport management code that checks for idle connections keeps a
reference to PJSIP's transport for IDLE_TIMEOUT milliseconds (32000 by
default). Because of this, if the transport is closed before this
timeout, the idle checking code will keep the transport from actually
being shutdown until the timeout expires.
Rather than passing the AO2 object to the scheduler task, we just pass
its key and look it up when it is time to potentially close the idle
connection. The other transport management code handles cleaning up
everything else for us.
Additionally, because we use the address of the transport when
generating its name, we concatenate an incrementing ID to the end of the
name to guarantee uniqueness.
Related to ASTERISK~28231
Change-Id: I02ee9f4073b6abca9169d30c47aa69b5e8ae9afb
Previously both AMI and ARI used a default route on
their stasis message router to handle some of the
messages for publishing out their respective
connection. This caused messages to be given to
their subscription that could not be formatted
into AMI or JSON.
This change adds an API call to the stasis message
router which allows a default route to be set as well
as formatters that the default route is expecting.
This allows both AMI and ARI to specify that their
default route only wants messages of their given
formatter. By doing so stasis can more intelligently
filter at publishing time so that they do not receive
messages which will not be turned into AMI or JSON.
ASTERISK-28244
Change-Id: I65272819a53ce99f869181d1d370da559a7d1703
When --enable-dev-mode is used, pjsip_tpmgr_receive_packet() will assert
if passed a payload length of 0, so treat empty frames as if we didn't
receive them.
Change-Id: I9c5fdccd89cc8d2f3ed7e3ee405ef0fc78178f48
The commit I2f97ebfa79969a36a97bb7b9afd5b6268cf1a07d removed sending out
the ContactStatus AMI event when a contact is updated.
Thist change broke things which rely on old behavior.
This patch adds a new PJSIP global configuration option
'send_contact_status_on_update_registration' to be able to preserve old
ContactStatus behavior.
By default new behavior, i.e. the ContactStatus event will not be sent when a
device refreshes its registration.
Change-Id: I706adf7584e7077eb6bde6d9799ca408bc82ce46
For video streams it was possible for the abs-send-time information
to be placed into RTP streams even if not negotiated. Depending on
the endpoint in use this could cause video to not flow.
We now only enable abs-send-time for negotiation if WebRTC is enabled.
ASTERISK-28230
Change-Id: I0eb682302f8da3a4ea3c42e839208d55f825ed0c
The remote side may start a new stream when renegotiating RTP.
Need to reset the DTMF last sequence number and the timestamp
of the last END packet on RTP renegotiation.
If the new time stamp is lower then the timestamp of the last DTMF END packet
the asterisk drops all DTMF frames as out of order.
This bug was caught using Cisco ip-phone SPA5XX and codec g722.
On SIP session update the SPA50X resets stream and a new timestamp is twice
smaller then the previous.
ASTERISK-28162 #close
Change-Id: Ic72b4497e74d801b27a635559c1cf29c16c95254
All of the fields that were removed were no longer referenced except for
'lastrxts' and 'rxseqno' which were only ever written to.
Change-Id: I5a5d31eb33e97663843698f58d0d97f22a76627c
The profile-iop octet (the 2nd) of profile-level-id can be zero
according to RFC 6184 Section 8.1. So we ignore its value when deciding
to include profile-level-id in the outgoing SDP.
ASTERISK-27959 #close
Reported by: David Kuehling
Change-Id: Id28cd916a3d7748058fe9609b585d07d9e243f73
The ARI DELETE /channels command takes a "reason" parameter
Previously, there were only five reasons implemented
This patch adds more reasons to choose from for more
complex setups
ASTERISK-28198 #close
Change-Id: I85996f1076c9946d65c778413f040a845a90fecc
* The bridging core no longer uses the stasis cache for bridge
snapshots. The latest bridge snapshot is now stored on the
ast_bridge structure itself.
* The following APIs are no longer available since the stasis cache
is no longer used:
ast_bridge_topic_cached()
ast_bridge_topic_all_cached()
* A topic pool is now used for individual bridge topics.
* The ast_bridge_cache() function was removed since there's no
longer a separate container of snapshots.
* A new function "ast_bridges()" was created to retrieve the
container of all bridges. Users formerly calling
ast_bridge_cache() can use the new function to iterate over
bridges and retrieve the latest snapshot directly from the
bridge.
* The ast_bridge_snapshot_get_latest() function was renamed to
ast_bridge_get_snapshot_by_uniqueid().
* A new function "ast_bridge_get_snapshot()" was created to retrieve
the bridge snapshot directly from the bridge structure.
* The ast_bridge_topic_all() function now returns a normal topic
not a cached one so you can't use stasis cache functions on it
either.
* The ast_bridge_snapshot_type() stasis message now has the
ast_bridge_snapshot_update structure as it's data. It contains
the last snapshot and the new one.
* cdr, cel, manager and ari have been updated to use the new
arrangement.
Change-Id: I7049b80efa88676ce5c4666f818fa18ad1985369
When a channel snapshot was created it used to be done
from scratch, copying all data (many strings). This incurs
a cost when doing so.
This change segments the channel snapshot into different
components which can be reused if unchanged from the
previous snapshot creation, reducing the cost. In normal
cases this results in some pointers being copied with
reference count being bumped, some integers being set,
and a string or two copied. The other benefit is that it
is now possible to determine if a channel snapshot update
is redundant and thus stop it before a message is published
to stasis.
The specific segments in the channel snapshot were split up
based on whether they are changed together, how often they
are changed, and their general grouping. In practice only
1 (or 0) of the segments actually get changed in normal
operation.
Invalidation is done by setting a flag on the channel when
the segment source is changed, forcing creation of a new
segment when the channel snapshot is created.
ASTERISK-28119
Change-Id: I5d7ef3df963a88ac47bc187d73c5225c315f8423
Channels no longer use the Stasis cache for channel snapshots. Instead
they are stored in a hash table in stasis_channels which reduces the
number of Stasis messages created and allows better storage.
As a result the following APIs are no longer available since the stasis
cache is no longer used:
ast_channel_topic_cached()
ast_channel_topic_all_cached()
The ast_channel_cache_all() and ast_channel_cache_by_name() functions
now return an ao2_container of ast_channel_snapshots rather than
a container of stasis_messages therefore you can't (and don't need
to) call stasis_cache functions on it.
The ast_channel_topic_all() function now returns a normal topic not
a cached one so you can't use stasis cache functions on it either.
The ast_channel_snapshot_type() stasis message now has the
ast_channel_snapshot_update structure as it's data. It contains the
last snapshot and the new one.
ast_channel_snapshot_get_latest() still returns the latest snapshot.
The latest snapshot is now stored on the channel itself to eliminate
cache hits when Stasis messages that have the snapshot as a payload
are created.
ASTERISK-28102
Change-Id: I9334febff60a82d7c39703e49059fa3a68825786
The marker bit set on the voice packet indicates the start
of a new stream and a new time stamp.
Need to reset the DTMF last sequence number and the timestamp
of the last END packet.
If the new time stamp is lower then the timestamp of the last DTMF END packet
the asterisk drops all DTMF frames as out of order.
This bug was caught using Cisco ip-phone SPA50X and codec g722.
On SIP session update the SPA50X resets stream indicating it with market bit
and a new timestamp is twice smaller then the previous.
ASTERISK-28162 #close
Change-Id: If9c5742158fa836ad549713a9814d46a5d2b1620
Replace usage of ao2_container_alloc with ao2_container_alloc_hash or
ao2_container_alloc_list. Remove ao2_container_alloc macro.
Change-Id: I0907d78bc66efc775672df37c8faad00f2f6c088
This change adds the ability for subscriptions to indicate
which message types they are interested in accepting. By
doing so the filtering is done before being dispatched
to the subscriber, reducing the amount of work that has
to be done.
This is optional and if a subscriber does not add
message types they wish to accept and set the subscription
to selective filtering the previous behavior is preserved
and they receive all messages.
There is also the ability to explicitly force the reception
of all messages for cases such as AMI or ARI where a large
number of messages are expected that are then generically
converted into a different format.
ASTERISK-28103
Change-Id: I99bee23895baa0a117985d51683f7963b77aa190
The res_ari(POST /channels/create handler) deos not check the endpoint
parameter length. And it causes core
dump.
Fixed it to check the parameter length. Also fixed memory leak.
ASTERISK-28169
Change-Id: Ibf10a9eb8a2e3a9ee1e13fbe748b2ecf955c3993
PJSIP assumes that these header names are not allocated, does not clone
the name strings when reusing headers.
Block unload of res_pjsip_caller_id until shutdown to ensure static
memory stays valid. It was previously unsafe to unload while any
sessions are active.
Change-Id: I190854dea943d6e441cf03733f8a0da661aea27f
The presence of Record-Route in re-invites is optional, thus it is
important to make sure the dialog doesn't have a routset before
rewriting the contact header.
ASTERISK-28129 #close
Change-Id: Ic8ceb54ccfc93f7e315e476c514a2c777f2da7dc
When Asterisk's taskprocessors get overloaded we need to reduce the work
load. res_pjsip currently ignores new SIP requests and relies on SIP
retransmissions in the hope that the overload condition will clear soon
enough to handle the retransmitted SIP request.
This change adds the following code after ast_taskprocessor_alert_get()
has returned TRUE:
1- identifies transport type. If non-udp then send a 503 response
2- if transport type is udp/udp6 then ignore, as before.
Change-Id: I1c230b40d43a254ea0f226b7acf9ee480a5d3836
The use of a '|' in the "global/debug" synopsis documentation caused the
generated html table on the wiki to add an extra column that included the
text after the pipe.
This patch replaces the pipe with a comma.
ASTERISK-28150
Change-Id: I3d79a6ca6d733d9cb290e779438114884b98a719
The current round-robin method does not take the current taskprocessor
load into consideration when distributing requests. Using the least-size
method the request goes to the taskprocessor that is servicing the least
number of active tasks at the current time.
Longer running tasks with the round-robin method can delay processing
tasks.
* Change the algorithm from round-robin to least-size for picking the
PJSIP taskprocessor from the default serializer pool.
Change-Id: I7b8d8cc2c2490494f579374b6af0a4868e3a37cd
This patch adds new options 'trust_connected_line' and 'send_connected_line'
to the endpoint.
The option 'trust_connected_line' is to control if connected line updates
are accepted from this endpoint.
The option 'send_connected_line' is to control if connected line updates
can be sent to this endpoint.
The default value is 'yes' for both options.
Change-Id: I16af967815efd904597ec2f033337e4333d097cd
The module 'res_pjsip_notify' inefficiently makes a lot of DB requests
on CLI completion on the endpoint.
For example if there are 10k endpoints the module makes 10k requests
of these 10k records.
Even if a part of the endpoint entered
the module makes the same 10k requests and then filtered them by itself.
This patch gathers endpoints container by prefix
and adds all gathered endpoints to completion at once.
ASTERISK-28137 #close
Change-Id: Ic20024912cc77bf4d3e476c4cd853293c52b254b
Add a new global flag to res_pjsip to allow the callerid to be used
as the username in the contact header. This allows chan_pjsip to have
the same behavour as chan_sip
ASTERISK-28087 #close
Change-Id: I9a720e058323f6862a91c62f8a8c1a4b5c087b95
This change implements a few different generic things which were brought
on by Google Voice SIP.
1. The concept of flow transports have been introduced. These are
configurable transports in pjsip.conf which can be used to reference a
flow of signaling to a target. These have runtime configuration that can
be changed by the signaling itself (such as Service-Routes and
P-Preferred-Identity). When used these guarantee an individual connection
(in the case of TCP or TLS) even if multiple flow transports exist to the
same target.
2. Service-Routes (RFC 3608) support has been added to the outbound
registration module which when received will be stored on the flow
transport and used for requests referencing it.
3. P-Associated-URI / P-Preferred-Identity (RFC 3325) support has been
added to the outbound registration module. If a P-Associated-URI header
is received it will be used on requests as the P-Preferred-Identity.
4. Configurable outbound extension support has been added to the outbound
registration module. When set the extension will be placed in the
Supported header.
5. Header parameters can now be configured on an outbound registration
which will be placed in the Contact header.
6. Google specific OAuth / Bearer token authentication
(draft-ietf-sipcore-sip-authn-02) has been added to the outbound
registration module.
All functionality changes are controlled by pjsip.conf configuration
options and do not affect non-configured pjsip endpoints otherwise.
ASTERISK-27971 #close
Change-Id: Id214c2d1c550a41fcf564b7df8f3da7be565bd58
These macros have been documented as legacy for a long time but are
still used in new code because they exist. Remove all references to:
* ao2_container_alloc_options
* ao2_t_container_alloc_options
* ao2_t_container_alloc
These macro's are also removed. Only ao2_container_alloc remains due to
it's use in over 100 places.
Change-Id: I1a26258b5bf3deb081aaeed11a0baa175c933c7a
Most were in comments. A couple were in warning messages.
Pointed out by Jonathan H on the Asterisk users mailing list.
Change-Id: I6286939dff5d0a27a2758140570106f1cb351855
* The dependency ensures that res_pjproject cannot be manually unloaded
before res_rtp_asterisk.
* The dependency allows startup loading errors to report that
res_rtp_asterisk depends upon res_pjproject.
Change-Id: Icf5e7581f4ddd6189929f6174c74dd951f887377
This patch sets the callerid_tag to empty string by default.
If the callerid_tag is set to NULL then the tag does not
become part of a connected line update.
For example:
Alice's tag is "Alice".
Bob's tag is empty.
Charlie's tag is "Charlie".
Alice calls Bob and then does attended transfer to Charlie.
When Alice hangs up the CONNECTEDLINE(tag) is "Alice"
on the interception routine on the Charlie's channel, but should be empty.
Ths patch also fix memory leaks if there are more then one options
"callerid", "callerid_tag", "voicemail_extension" and "contact_user"
in the pjsip.conf endpoint definition.
Change-Id: I86ba455c4677ca8d516d9a04ce7fb4d24dd576e4
The return status when there was no change in statsd.conf was incorrect.
This resulted in the wrong status message on the CLI when reloading the
module.
* Fixed cleanup on initial load if initializing statsd failed.
Change-Id: Id24fae75f1a7ff584a444a5680e867d989792481
I think this module is so screwed up that it doesn't work anymore. Even
with these attempts to fix things it still won't gracefully shut down.
The module refs will not go to zero to allow unloading the module.
* Fix module ref counting dealing with the SMDI interface object. There
were several off-nominal paths that unbalanced the module ref count. Also
the destructor freed the ao2 object itself which is bad. Made the
smdi_read thread not hold its own ref to the SMDI interface object so when
all refs go away the destructor will stop the listener thread.
* Fixed the smdi_load() return code of 1 concerning the number of
listeners. The test was inverted.
Change-Id: Ic288db51b58e395d6a2fc3847f77176c16988784
This module is an optional dependency of a couple of other modules. If it
declines to load, it then forces other modules that can optionally use
this module to also decline.
* Made use the default configuration if the config file does not exist and
simplified some of the logic.
Change-Id: Ib93191f1fe28c0dd9ebe3d84c7762b32f83c4eb9
This module is an optional dependency of many modules. If it declines to
load it then forces other modules that can optionally use this module to
also decline.
* Made use default configuration if there is a config error or the config
file does not exist.
Change-Id: If1068a582ec54ab7fb437265cb5370a97a825737
CLI command 'pjsip show contacts' inefficiently make a lot of DB requests.
For example if there are 10k aors then asterisk requests these 10k records
of aor and then does 10k requests of contact - one request per aor.
Even if use 'like <pattern>' the asterisk requests all aor's and contact's
records and then filters them by itself.
This patch gathers contact's container by
- retrieving all dynamic contacts by regex (filtered by reg_server)
- retrieving all aors with permanent contacts
- finally filters container by regex
ASTERISK-28077 #close
Change-Id: Id0ad65d14952a02fb213273a90f3f680a8149618
Fixed an issue that resulted in "Allocation failed" each time an ARI
request was made to start playing MOH on a bridge.
In bridge_moh_create() we were attaching the after bridge callbacks to
chan which is the ;1 channel of the unreal channel pair. We should have
attached them to the ;2 channel which is pushed into the bridge by
ast_unreal_channel_push_to_bridge(). The callbacks are called when the
specific channel leaves the bridging system. Since the ;1 channel is
never put into a bridge the callbacks never get called. The callbacks
then never remove the moh_wrapper from the app_bridges_moh container. As
a result we cannot find the channel associated with the wrapper to start
MOH because it has hungup. This is the reason causing the reported issue.
* Rather than using after bridge callbacks to cleanup, we now have
moh_channel_thread() doing the cleanup when the channel hangs up.
* Fixed moh_channel_thread() accumulating control frames on the stasis
bridge MOH channel until MOH is stopped. Control frames are no longer
accumulated while MOH is playing.
* Fixed channel ref counting issue. stasis_app_bridge_moh_channel() may
or may not return a channel ref. As a result ast_ari_bridges_start_moh()
wouldn't know it may have a channel ref to release.
stasis_app_bridge_moh_channel() will now return a ref with the channel it
returns.
* Eliminated RAII_VAR in bridge_moh_create().
ASTERISK-26094 #close
Change-Id: Ibff479e167b3320c68aaabfada7e1d0ef7bd548c
When networks experience disruptions, there can be large gaps of time
between receiving packets. When strictrtp is enabled, this created
issues where a flood of packets could come in and be seen as an attack.
Another option - seqno - has been added to the strictrtp option that
ignores the time interval and goes strictly by sequence number for
validity.
Change-Id: I8a42b8d193673899c8fc22fe7f98ea87df89be71
On SQL error there is not diagnostic information about this error.
There is only
WARNING res_odbc.c: SQL Execute error -1!
The function ast_odbc_print_errors calls a SQLGetDiagField to get the number
of available diagnostic records, but the SQLGetDiagField returns 0.
However SQLGetDiagRec could return one diagnostic records in this case.
Looking at many example of getting diagnostics error information
I found out that the best way it's to use only SQLGetDiagRec
while it returns SQL_SUCCESS.
Also this patch adds calls of ast_odbc_print_errors on SQL_ERROR
to res_config_odbc.
ASTERISK-28065 #close
Change-Id: Iba5ae5470ac49ecd911dd084effbe9efac68ccc1
In order to do this and provide good feedback, a new macro was
created (AST_EXT_LIB_EXTRA_CHECK) which does the normal check and
path setups for the library then compiles, links and runs a supplied
code fragment to do the final determination. In this case, the
final code fragment compares UNBOUND_VERSION_MAJOR
and UNBOUND_VERSION_MINOR to determine if they're greater than or
equal to 1.5.
Since we require version 1.5, some code in res_resolver_unbound
was also simplified.
ASTERISK-28045
Reported by: Samuel Galarneau
Change-Id: Iee94ad543cd6f8b118df8c4c7afd9c4e2ca1fa72
This change raises a testsuite event to provide what port
Asterisk has actually allocated for RTP. This ensures that
testsuite tests can remove any assumption of ports and instead
use the actual port in use.
ASTERISK-28070
Change-Id: I91bd45782e84284e01c89acf4b2da352e14ae044
* Use "o*" format specifier for optional fields in ast_json_party_id.
* Stop using ast_json_deep_copy on immutable objects, it is now thread
safe to just use ast_json_ref.
Additional changes to ast_json_pack calls in the vicinity:
* Use "O" when an object needs to be bumped. This was previously
avoided as it was not thread safe.
* Use "o?" and "O?" to replace NULL with ast_json_null(). The
"?" is a new feature of ast_json_pack starting with Asterisk 16.
Change-Id: I8382d28d7d83ee0ce13334e51ae45dbc0bdaef48
ast_rtp_new free'd rtp upon failure, but rtp_engine.c would also call
the destroy callback. Remove call to ast_free from ast_rtp_new, leave
it to rtp_engine.c to initiate the full cleanup. Add error detection
for the ssrc_mapping vector initialization. In rtp_allocate_transport
set rtp->s = -1 in the failure path where we close that FD to ensure we
don't try closing it twice.
ASTERISK-27854 #close
Change-Id: Ie02aecbb46228ca804e24b19cec2bb6f7b94e451
'rtpchecksums' and 'rtcpinterval' are not being reset to their defaults
if they are not present in the updated configuration file.
Change-Id: I1162e40199314d46cf3225d5e1271c4c81176670
The HTTP request processing in res_http_websocket allocates additional
space on the stack for various headers received during an Upgrade request.
An attacker could send a specially crafted request that causes this code
to overflow the stack, resulting in a crash.
* No longer allocate memory from the stack in a loop to parse the header
values. NOTE: There is a slight API change when using the passed in
strings as is. We now require the passed in strings to no longer have
leading or trailing whitespace. This isn't a problem as the only callers
have already done this before passing the strings to the affected
function.
ASTERISK-28013 #close
Change-Id: Ia564825a8a95e085fd17e658cb777fe1afa8091a
This adds a module which registers a CLI command that can set the
REMB bitrate value for REMB as it enters or exits Asterisk. This
allows you to ignore what Asterisk or a client produces and is
useful for demonstrations.
This does not generate REMB frames, however, but just modifies
them as they flow to or from a channel.
Change-Id: Ib089427c46a4a36d645cecfe02406adb38c17bec
This change brings in PJSIP 2.8, removes all the patches
that were merged upstream, and makes a minor change to
support a breaking change that was done.
ASTERISK-28059
Change-Id: I5097772b11b0f95c3c1f52df6400158666f0a189
Given a scenario where a session refresh was done with a removed
stream we would always add a removed stream to the outgoing SDP
even if one did not already exist.
This change makes it so that a removed stream is only placed into
the SDP if one already exists.
ASTERISK-28047
Change-Id: Ibb97d21cdeb87a8acae0c720861b0ff255708442
Both pjsip_tx_data.tp_info.dst_name and pjsip_rx_data.pkt_info.src_name
store IPv6 addresses without enclosing brackets. This causes some log
output to be confusing because it is difficult to separate the IPv6
address from a port specification.
* Use pj_sockaddr_print() along with pjsip_tx_data.tp_info.dst_addr and
pjsip_rx_data.pkt_info.src_addr where possible for consistent IPv6
output.
* When a pj_sockaddr is not available, explicitly wrap IPv6 addresses
in brackets.
* When assigning pjsip_rx_data.pkt_info.src_name ourselves, make sure
to also set pjsip_rx_data.pkt_info.src_addr.
Change-Id: I5cfe997ced7883862a12b9c7d8551d76ae02fcf8
As they're not actively used, they only grow stale. The moduleinfo field itself
is kept in Asterisk 13/15 for ABI compatibility.
ASTERISK-28046 #close
Change-Id: I8df66a7007f807840414bb348511a8c14c05a9fc
The bundled version of pjproject has a patch for Solaris compatability
that changes the definition of various socket structures which we need
to account for when compiling against a non-bundled version.
ASTERISK-28049 #close
Change-Id: Ia1ea47c433fc2d915115193ee889a752373925f0
On MOH activation, moh_files_readframe() is called while the current
stream attached to the channel is NULL and it calls ast_moh_files_next()
immediately. However, it won't call ast_moh_files_next() again if sample
reading fails. The failure may occur because res_musiconhold retains the
last sample reading position in the channel data and MOH during the
previous hold/retrieve just reached EOF. Obviously, a bit of bad luck is
required here.
* Restructured moh_files_readframe() to try a second time to start MOH if
there was no stream setup and the saved position was at EOF. Also added
comments describing what is going on for each step.
ASTERISK-28029
Change-Id: I1508cf2c094f8feca22d6f76deaa9fdfa9944860
Currently, to convert from a pj_sockaddr to an ast_sockaddr, the address
needs to be rendered to a string and then parsed into the correct
structure. This also involves a call to getaddrinfo(3). The same is true
for the inverse operation.
Instead, because we know the internal structure of both ast_sockaddr and
pj_sockaddr, we can translate directly between the two without the
need for an intermediate string.
Change-Id: If0fc4bba9643f755604c6ffbb0d7cc46020bc761
The T.38 fax gateway state machine can cause the fax gateway
to be started more than once on a channel depending on the
responses of the remote endpoint. This would previously leak
the channel name, channel unique id, and underlying fax engine
state. This change instead makes it so that if the fax gateway
session is already present and not reserved the fax gateway
is not started again.
ASTERISK-27981
Change-Id: I552d95086860cb18f2522ee40ef47b13b6da2e0e
SIP responses over WebSockets when the client is using IPv6 have invalid
Via headers according to RFC 3261. The 'received' header parameter
should not be wrapped in brackets if it is an IPv6 address.
When src_name is populated by the built-in PJSIP transports, the code
uses pj_sockaddr_print() with 'flags' set to 0, meaning that the
brackets are not rendered around IPv6 addresses.
This may be related to ASTERISK~27101.
See also: https://github.com/onsip/SIP.js/pull/594
ASTERISK-28020 #close
Change-Id: I8ea9d289901b837512bee2ca2535e3dc14f04d77
This new option can be passed for ./configure or
./tests/CI/buildAsterisk.sh to prevent download/install of binary
modules.
Normally enabling the categories MENUSELECT_CODECS or MENUSELECT_RES
will result in binary modules being enabled even if the build target is
incompatible with those modules. This includes CI scripts which enable
categories before disabling specific modules.
If more binary modules are offered in the future this will help avoid
accidentally downloading them if unwanted or incompatible. Adding a
binary module will only require creating a new menuselect entry similar
to the existing ones, it will not be necessary to modify the CI scripts.
Change-Id: I6b1bd1c75a2e48f05b8b8a45b7a7a2d00a079166
The realtime text timer pops regularly and sends text frames even if
the buffer is empty. This causes a lot of unecessary debug logging.
* Made red_write() test if we need to send a frame before calling
ast_rtp_write()
ASTERISK-28002
Reported by: Emmanuel BUU
Tested by: Emmanuel BUU
Change-Id: Icf81310c3b8080b615a42060afc02ab41f9523dd
When a Contact is updated the only material change that qualify
support cares about is the underlying configuration for the AOR.
In this case we will update things with the new AOR information but
otherwise the callback to indicate the Contact has changed can be
ignored.
This is because it is only when a Contact is added or deleted that
material changes occur within the qualify support. An update can't
change the URI since it would result in a new Contact so it can be
ignored.
Change-Id: I2f97ebfa79969a36a97bb7b9afd5b6268cf1a07d
We were still getting crashes after the first fix. Somehow we receive a
non-2xx final response before we get a 200 final response. With the
failure response we had already cleaned up and destroyed some data
structures. When the unexpected 200 response comes in we crash.
* Add protection code to prevent processing another final T.38 reINVITE
response.
ASTERISK-27944
Change-Id: I8b5baba8d07fe4d63f0d7d05d3eb9a3d27d40a74
The allow_unqualified_fetch option for the sorcery realtime backend
blocked actually fetching all rows when the option is set to warn.
* Made issue a warning and actually do the request when
allow_unqualified_fetch=warn is set.
Change-Id: I74456c80a03a62dce66fc3dc3cb0cf2351ac4312
Compiling without SRTP support installed resulted in some unused variable
warnings. These warnings also showed that the srtp variable was obtained
and passed around some functions but not really used even when a system
has SRTP installed.
Change-Id: I6daad34be3e89b19adef6e2fbe738018975155fc
If in the initial sdp the caller doesn't include the line
a=rtcp-mux
Then asterisk shoud not include rtcp-mux in the response regardless
of rtcp-mux being enabled on the endpoint
ASTERISK-28007 #close
Change-Id: I58e9b9f40a139afc0da5de41906cc608fb62adc7
sip_options_get_endpoint_state_compositor_state leaked a reference to
the first available endpoint state compositor that was found.
Change-Id: Idb6be19f7219b6eed1dfb19c1e740dd40cb3fdc7
This change adds the "party" parameter to the Remote-Party-ID header
which indicates which party the header information is applicable
to. In Asterisk this is determined on whether we are the calling
or called party. This is added to improve interoperability with some
implementations.
ASTERISK-28006
Change-Id: I1eec3e377ffff8633b5c1dd59a05e9533122cfca
When a conference contained a mixture of audio/video and audio-only
users, a NOTICE message would pop up stating there are no joint
capabilities between streams. This happens because streams can never be
removed, but they can be in a REMOVED state. If we have the scenario
where user A joins with audio/video, user B joins with audio-only, and
user C joins with audio/video, then user A leaves, the message would
be triggered. That removed stream is still in the SDP, but Asterisk
would pass it through, causing it to be seen as a ulaw stream. A check
has been added for removed streams, setting their status to REMOVED when
handling negotiated SDPs.
Also addressed an issue where user A joins, then user B joins but does
not receive video until much later. Full frames were not being sent,
causing some PLI from the browser. Because the video was flowing in one
direction, the browser sets the SSRC to 1, but Asterisk was dropping the
PLI because of that. Added a check to see if the SSRC is 1 or not, which
sends full frames and allows video to flow between user A and user B.
This should only happen when dealing with PSFB or FUR, and in the case
of PSFB, only for PLI.
ASTERISK-27398
Change-Id: I26e7c6f101bc119549eeca406b5bcd25ad8ebc5e
The authors of PJProject undef s_addr because of some issue in Microsoft
Windows. However in Oracle Solaris, s_addr is not a structure member, but
defined to map to the real structure member.
Updates the patch from ASTERISK_20366
ASTERISK-27997
Change-Id: I8223026d4d54e2a46521085fcc94bfa6ebe35b11
* Don't include pjlib.h twice in res_pjsip.h
* Consistently use #include <> form for pjproject includes.
(pjsip.h and pjlib.h)
Change-Id: I3f7b42044840de64edf7e9d7695cb60c45990dc7
If asterisk offer an endpoint with SRTP and that endpoint respond
with non srtp, in that case channel(rtp,secure,audio) reply wrong
status.
Why delete flag AST_SRTP_CRYPTO_OFFER_OK while check identical remote_key:
Currently this flag has being set redundantly. In either case identical
or different remote_key this flag has being set. So if we
don't set it while we receive identical remote_key or non SRTP SDP
response then we can take decision of srtp use by using that flag.
ASTERISK-27999
Change-Id: I29dc2843cf4e5ae2604301cb4ff258f1822dc2d7
This change removes a sorcery lookup for retrieving all
contacts at the end of the registration process by keeping
track of the contacts that are added/updated/deleted.
This ensures at the end of the process the container of
contacts we have is the current state.
Pool usage has also been reduced by allocating one for
usage throughout the handling of a REGISTER and resetting
it to a clean state. This ensures that in most cases
we allocate once and just reuse it.
ASTERISK-28001
Change-Id: I1a78b2d46f9a2045dbbff1a3fd6dba84b612b3cb
This patch adds regular expression support to make the identify section's
match_header option more useful when attempting to match complex headers
like the 'To' or 'From' headers. The 'From' header has variable
components such as the tag parameter that you cannot predict. To specify
a regular expression put slashes around the regular expression in place of
the header value.
[identify-alice]
type=identify
endpoint=alice
match_header=From: /<sip:alice@127\\.0\\.0\\.1>/
* Added regex support to match_header so you could match a 'To' header
among other complex headers.
Fixed reported crashes when trying to match special headers like 'Contact'.
The identify section's match_header method used code that assumed you were
matching a generic header. Any other type of header could cause a crash
if the header structure variant did not match the generic header enough.
* Made use code that will work for any header type instead of code
specific to generic headers.
Other fixes while in the area:
* Made check all headers of the requested name.
* Added some more sanity checks to the configured identify matching
options when applying the configuration.
ASTERISK-27548
Change-Id: I27dfd4ff5e2259b906640e3c330681b76b4ed1f1
The alembic for the PJSIP subscription persistence table has the
"prune_on_boot" field as a boolean. While in Asterisk we are
tolerant of many different definitions of true and false in the
database we only accept "yes" and "no". This change makes the
field treated as a yes/no instead of an integer, thus storing
"yes" and "no" instead of "1" and "0".
Change-Id: Ic8b9211b36babefe78f70def6828a135a6ae7ab6
OpenSSL is an optional external library and should stay optional even when
Developer Mode is configured.
ASTERISK-27990
Change-Id: Ia68a4cd5474b26d45e0f43b04032ad598022853b
When realtime text packets are to be sent, the text is accumulated in a
buffer and sent regularly by a timer. It can happen that commands such as
a backspace, CR, or LF get merged with regular text. This breaks some
UAs.
The proposed change:
* We test if the current packet contains a command. If so we send the
buffer immediately.
* We test if the buffer contained a command. If so we send the buffer
immediately.
* We accumulate the text (or the command) in the buffer.
ASTERISK-27970
Change-Id: Ifbe993311410fa855cb8aa4a12084db75f413462
If a SIP MESSAGE is triggered for an endpoint that is currently not registered
- and therefore has no valid contact associated - an error message was logged.
Since this is a valid request in a valid use cases this is now changed to a
warning, as discussed with Matt Fredrickson on the asterisk-dev mailing list.
Change-Id: I55eb62d2712818a58c7532119dec288bd98cf0c0
A change recently went in which disabled the built-in PJSIP
keepalive. This defaulted to 90 seconds and kept TCP/TLS
connections alive. Disabling this functionality has resulted
in a behavior change of not doing keepalives by default resulting
in TCP/TLS connections dropping for some people.
This change makes our default keepalive interval 90 seconds
to match the previous behavior and preserve it.
ASTERISK-27978
Change-Id: Ibd9a45f3cbe5d9bb6d2161268696645ff781b1d6
* Use the replacement function ast_sip_push_task_wait_servant() instead of
the deprecated ast_sip_push_task_synchronous().
Change-Id: I145b550ba7054640c7faa3b644e63137f505c612
Support has been added for receiving a NACK request and handling it.
Now, Asterisk can detect when a NACK request should be sent and knows
how to construct one based on the packets we've received from the remote
end. A buffer has been added that will store out of order packets until
we receive the packet we are expecting. Then, these packets are handled
like normal and frames are queued to the core like normal. Asterisk
knows which packets to request in the NACK request using a vector
which stores the sequence numbers of the packets we are currently missing.
If a missing packet is received, cycle through the buffer until we reach
another packet we have not received yet. If the buffer reaches a certain
size, send a NACK request. If the buffer reaches its max size, queue all
frames to the core and wipe the buffer and vector.
According to RFC3711, the NACK request must be sent out in a compound
packet. All compound packets must start with a sender or receiver
report, so some work was done to refactor the current sender / receiver
code to allow it to be used without having to also include sdes
information and automatically send the report.
Also added additional functionality to ast_data_buffer, along with some
testing.
For more information, refer to the wiki page:
https://wiki.asterisk.org/wiki/display/AST/WebRTC+User+Experience+Improvements
ASTERISK-27810 #close
Change-Id: Idab644b08a1593659c92cda64132ccc203fe991d
A problem I've seen countless times is a global or system section
for PJSIP not getting applied. This is inevitably the result of
the "type=" line missing. This change alleviates that problem.
The ability to specify an explicit section name has been
added to res_sorcery_config. If the configured section
name matches this and there are no unknown things configured
the section is taken as being for the given type.
Both the PJSIP "global" and "system" types now support this
so you can just name your section "global" or "system" and it
will be matched and used, even without a "type=" line.
ASTERISK-27972
Change-Id: Ie22723663c1ddd24f869af8c9b4c1b59e2476893
I have removed the STATIC_BUILD option immediately as it has not
been maintained in many years and is non-functional.
ASTERISK-27965
Change-Id: I64783d017b86dba9ee3c7bcfb97e59889a3f76d7
SRTP SDES key lifetime support was added in ASTERISK_17899.
In that addition, the minimum key lifetime to be accepted was
set at the 10 hours @ 20ms/packet = 1800000 packets.
The firmware in the obi1xx ATA uses a hardcoded lifetime of
2^20 packets.
Lower the limit to 2^20 to support a wider field of clients.
ASTERISK-27967 #close
Change-Id: I81a0703c595a0c9101dfdf02300149a3cc39bf94
Previously, the msid "label" attribute was used to correlate
participant info but because streams could be reused, the msid
wasn't being updated correctly when someone left the bridge and
another joined.
Now, instead of looking for the msid attribute on a channel's streams,
app_confbridge sets an "SDP:LABEL" attribute on the stream which
res_pjsip_sdp_rtp looks for. If it finds it, it adds a "label"
attribute to the current sdp.
Change-Id: I6cbaa87fb59a2e0688d956e72d2d09e4ac20d5a5
Keep track if ICE candidates were in the SDP offer & only put them
in the corresponding SDP answer if the offer condaind ICE candidates
ASTERISK-27957 #close
Change-Id: Idf2597ee48e9a287e07aa4030bfa705430a13a92
This commit adds a new function to res_parking.
This function, PARK_GET_CHANNEL allows the retrieval
of the channel name of the channel occupying the parking slot.
ASTERISK-22825 #close
Change-Id: Idba6ae55b8a53f734238cb3d995cedb95c0e7b74
When setting/appending the media id's to the bundle group attribute a '-1' was
being passed to the 'ast_str_set/append' function for the 'max_len' parameter.
This essentially capped the length of the string to what it was originally
allocated with. In this case 64 bytes.
This patch makes it so a '0' is passed as in for the 'max_len', which means
"no maximum length".
ASTERISK-27955 #close
Change-Id: Iec565df6600401d54a502854a53d19bb4cc34876
The function pubsub_on_rx_publish_request incorrectly uses
of AST_SCHED_REPLACE_UNREF.
The AST_SCHED_REPLACE_UNREF should unref old '_data'.
Because of this, there may be a double unref
of variable 'publication' when ast_sched_del is unsuccessful
that leads to use after free of the 'publication' in publish_expire.
ASTERISK-27956 #close
Change-Id: Ie0f0cfc7e036953d890b188656010b325a5cdc82
A new option 'suppress_q850_reason_headers' has been added to the
endpoint object. Some devices can't accept multiple Reason headers and
get confused when both 'SIP' and 'Q.850' Reason headers are received.
This option allows the 'Q.850' Reason header to be suppressed.
The default value is 'no'.
ASTERISK-27949
Reported-by: Ross Beer
Change-Id: I54cf37a827d77de2079256bb3de7e90fa5e1deb1
When negotiating an incoming T.38 stream the code incorrectly
returned failure instead of a decline for the stream when a
problem occurred or the configuration didn't allow it. This
resulted in SDP offers being rejected with a 488 response
in all cases, even when another valid stream was present.
This change makes it so the stream is now declined. If no
streams are accepted a 488 response is sent while if at least
one stream is accepted all the declined streams are, well,
declined.
ASTERISK-27763
Change-Id: I88bcf793788c412a9839d111a5c736bf6867807c
We were blindly responding with AST_T38_REFUSED when ANY T.38 control
frame came accross the bridge. This causes T.38 Gateway to get confused
and the T.38 session to get in a strange state.
* Made the T.38 framehook only respond to request frames and ignore
response frames.
ASTERISK-27657
ASTERISK-27080
Change-Id: I5fb5967c7d1efb30a7ff375f82887ca82a55b05b
Using the keep_alive_interval option can result in a deadlock between the
pjproject transport manager group lock and the monitored transports ao2
container lock. The pjproject transport manager group lock has to be
superior in the locking order to the monitored transports ao2 container
lock because of pjproject callbacks called when already holding the group
lock. The lock inversion happens when Asterisk attempts to send a keep
alive packet over the reliable transports.
* Made keepalive_transport_thread() iterate over the monitored transports
container rather than use the ao2_callback() method. This avoids holding
the container lock when sending the keep alive packet.
ASTERISK-26686
Change-Id: I5d5392a52e698bbe41a93f7d8e92bf0e61fe3951
The Websocket transport uses the built-in HTTP server. As a result
the TLS configuration is done in http.conf and not in pjsip.conf.
This change adds a warning if this is configured in pjsip.conf and
also clarifies in the sample configuration file.
Change-Id: I187d994d328c3ed274b6754fd4c2a4955bdc6dd9
If we initiated a T.38 reINVITE, we would crash if we received any other
1xx response message except 100 if it were followed by a 200 response.
* Made ignore any 1xx response so we do not close out the T.38 negotiation
too early. For good measure we'll now accept any 2xx response as
acceptance of the reINVITE T.38 offer.
ASTERISK-27944
Change-Id: I0ca88aae708d091db7335af73f41035a212adff4
Incoming publications need to ensure that the module remains
loaded for the lifetime of them. This is now done by holding
a reference to the module while the publication exists. This
mirrors that of inbound subscriptions.
ASTERISK-27783
Change-Id: Ia98c95a15e11af25728d5fb3e56e12cda0cfc7c0
In addition to text/* content types, incoming_in_dialog_request now
accepts application/* content types.
Also fixed a length issue when copying the body text. It was one
character short.
ASTERISK-27942
Change-Id: I4e54d8cc6158dc47eb8fdd6ba0108c6fd53f2818
pjproject by default currently will follow media forked during an INVITE
on outbound calls if the To tag is different on a subsequent response as
that on an earlier response. We handle this correctly. There have
been reported cases where the To tag is the same but we still need to
follow the media. The pjproject patch in this commit adds the
capability to sip_inv and also adds the capability to control it at
runtime. The original "different tag" behavior was always controllable
at runtime but we never did anything with it and left it to default to
TRUE.
So, along with the pjproject patch, this commit adds options to both the
system and endpoint objects to control the two behaviors, and a small
logic change to session_inv_on_media_update in res_pjsip_session to
control the behavior at the endpoint level.
The default behavior for "different tags" remains the same at TRUE and
the default for "same tag" is FALSE.
Change-Id: I64d071942b79adb2f0a4e13137389b19404fe3d6
ASTERISK-27936
Reported-by: Ross Beer
* Fix several instances where we were bumping a ref in the parameter and
then unrefing the object if it failed. The way the AST_VECTOR_APPEND()
and AST_VECTOR_REPLACE() macros are implemented means if it fails the new
value was never evaluated.
Change-Id: I2847872a455b11ea7e5b7ce697c0a455a1d0ac9a
There can be one and only one thread handling a channel's media at a time.
Otherwise, we don't know which thread is going to handle the media frames.
ASTERISK-27625
Change-Id: I4d6a2fe7386ea447ee199003bf8ad681cb30454e
ConfBridge can now send events to participants via in-dialog MESSAGEs.
All current Confbridge events are supported, such as ConfbridgeJoin,
ConfbridgeLeave, etc. In addition to those events, a new event
ConfbridgeWelcome has been added that will send a list of all
current participants to a new participant.
For all but the ConfbridgeWelcome event, the JSON message contains
information about the bridge, such as its id and name, and information
about the channel that triggered the event such as channel name,
callerid info, mute status, and the MSID labels for their audio and
video tracks. You can use the labels to correlate callerid and mute
status to specific video elements in a webrtc client.
To control this behavior, the following options have been added to
confbridge.conf:
bridge_profile/enable_events: This must be enabled on any bridge where
events are desired.
user_profile/send_events: This must be set for a user profile to send
events. Different user profiles connected to the same bridge can have
different settings. This allows admins to get events but not normal
users for instance.
user_profile/echo_events: In some cases, you might not want the user
triggering the event to get the event sent back to them. To prevent it,
set this to false.
A change was also made to res_pjsip_sdp_rtp to save the generated msid
to the stream so it can be re-used. This allows participant A's video
stream to appear as the same label to all other participants.
Change-Id: I26420aa9f101f0b2387dc9e2fd10733197f1318e
Previously, Asterisk used its script ./configure, to test whether OpenSSL was
built with no-srtp (or was simply too old). However, the header file
<openssl/opensslconf.h> is the preferred way to detect the local configuration
of OpenSSL.
As a positive side-effect the script ./configure does not interleave the
detection of the Open Settlement Protocol Toolkit (OSPTK) with the detection of
individual features of OpenSSL anymore.
Change-Id: I3c77c7b00b2ffa2e935632097fa057b9fdf480c0
When endpoint specific ACL rules block a SIP request they respond with a
403 forbidden. However, if an endpoint is not identified then a 401
unauthorized response is sent. This vulnerability just discloses which
requests hit a defined endpoint. The ACL rules cannot be bypassed to gain
access to the disclosed endpoints.
* Made endpoint specific ACL rules now respond with a 401 unauthorized
which is the same as if an endpoint were not identified. The fix is
accomplished by replacing the found endpoint with the artificial endpoint
which always fails authentication.
ASTERISK-27818
Change-Id: Icb275a54ff8e2df6c671a6d9bda37b5d732b3b32
Furthermore, allow OpenSSL configured with no-dh. Additionally, this change
allows auto-negotiation of the elliptic curve/group for servers, not only with
OpenSSL 1.0.2 but also with OpenSSL 1.1.0 and newer. This enables X25519
(since OpenSSL 1.1.0) and X448 (since OpenSSL 1.1.1) as a side-effect.
ASTERISK-27910
Change-Id: I5b0dd47c5194ee17f830f869d629d7ef212cf537
Currentrly pjsip_options code does not handle the situation when the
AOR qualify options were changed.
Also there is no way to find out what qualify options are using.
This patch add CLI commands to show and synchronize Aor qualify options:
pjsip show qualify endpoint <id>
Show the current qualify options for all Aors on the PJSIP endpoint.
pjsip show qualify aor <id>
Show the PJSIP Aor current qualify options.
pjsip reload qualify endpoint <id>
Synchronize the qualify options for all Aors on the PJSIP endpoint.
pjsip reload qualify aor <id>
Synchronize the PJSIP Aor qualify options.
ASTERISK-27872
Change-Id: I1746d10ef2b7954f2293f2e606cdd7428068c38c
Currentrly pjsip_options code does not handle the situation when the
qualify options were changed in realtime database.
Only 'module reload res_pjsip' helps.
This patch add a check on contact add/update observers if the contact
qualify options are different than local aor qualify options.
If the qualify options were modified then synchronize
the pjsip_options AOR local state.
ASTERISK-27872
Change-Id: Id55210a18e62ed5d35a88e408d5fe84a3c513c62
Certain race conditions between changing bridge types and DTMF can
cause the current FLAG_NEED_MARKER_BIT to send the marker bit before
the actual first packet of native bridging.
This logic keeps track of the ssrc the bridge is currently sending
and will correctly ensure the marker bit is set if SSRC as changed
from the previous sent packet.
ASTERISK-27845
Change-Id: I01858bd0235f1e5e629e20de71b422b16f55759b
When RTP was originally created it had the ability to place a single
extension in an RTP packet. In practice people wanted to potentially
put multiple extensions in one and so RFC 5285 (obsoleted by RFC
8285) came into existence. This allows RTP extensions to be negotiated
with a unique identifier to be used in the RTP packet, allowing
multiple extensions to be present in the packet.
This change extends the RTP engine API to add support for this. A
user of it can enable extensions and the API provides the ability to
retrieve the information (to construct SDP for example) and to provide
negotiated information (from SDP). The end result is that the RTP
engine can then query to see if the extension has been negotiated and
what unique identifier is to be used. It is then up to the RTP engine
implementation to construct the packet appropriately.
The first extension to use this support is abs-send-time which is
defined in the REMB draft[1] and is a second timestamp placed in an
RTP packet which is for when the packet has left the sending system.
It is used to more accurately determine the available bandwidth.
ASTERISK-27831
[1] https://tools.ietf.org/html/draft-alvestrand-rmcat-remb-03
Change-Id: I508deac557867b1e27fc7339be890c8018171588
This function originally was used in chan_sip to enable some simplifying
assumptions and eventually was copy and pasted into res_pjsip_logger and
res_hep. Since it's replicated in three places, it's probably best to
move it into the public netsock2 API for these modules to use.
Change-Id: Id52e23be885601c51d70259f62de1a5e59d38d04
Asterisk uses Reference Counting to track whether a module can be unloaded.
Every consumer who requires a module, increases the reference count. When the
consumer goes, is unloaded itself, it has to decrease the reference count on
all its used/required modules. That way
core stop gracefully
works on the command-line interface (CLI): One module after the other is
unloaded. A recent change broke this for the module res_pjsip.
ASTERISK-27861
Change-Id: I261abcb411d026bbb0691cc78f28300bfd3103a3
This fixes build warnings found by GCC 8. In some cases format
truncation is intentional so the warning is just suppressed.
ASTERISK-27824 #close
Change-Id: I724f146cbddba8b86619d4c4a9931ee877995c84
Previously, only an IP address would be accepted for the capture_address config
setting in hep.conf. This change allows capture_address to be a resolvable
hostname or an IP address.
ASTERISK-27796 #close
Reported-By: Sebastian Gutierrez
Change-Id: I33e1a37a8b86e20505dadeda760b861a9ef51f6f
The "ari set debug" code for incoming requests incorrectly assumed
that all requests would contain a body. If one did not exist the
request would be incorrectly rejected. The response that was sent
was also incomplete as an incorrect function was used to construct
the response.
The code has now been changed to no longer require a request to have
a body and the response updated to use the correct function.
ASTERISK-27801
Change-Id: I4eef036ad54550a4368118cc348765ecac25e0f8
* Increase maximum number of ciphers from 100 to 256 (or whatever
PJ_SSL_SOCK_MAX_CIPHERS is #define'd to)
* Simplify logic in cipher_name_to_id()
* Make signed/unsigned comparison consistent
Re: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=897412
Reported by: Ondřej Holas
Change-Id: Iea620f03915a1b873e79743154255c3148a514e7
When the local SSRC changes we need to update the SRTP information
so that the proper key is used. This is commonly done as a result
of bridging two channels together. Previously we only updated
the SRTP information if media had already flowed, but in practice
the channel driver may have already performed SRTP negotiation and
set up the previous SSRC. We now always do it on a local SSRC
change.
ASTERISK-27795
ASTERISK-27800
Change-Id: Ia7c8e74c28841388b5244ac0b8fd6c1dc6ee4c10
How it works today:
media_cache tries to parse out the extension of the media file to be played
from the URI provided to Asterisk while caching the file.
What's expected:
Better will be to have Asterisk get extension from other ways too. One of the
common ways is to get the type of content from the CONTENT-TYPE header in the
HTTP response for fetching the media file using the URI provided.
Steps to Reproduce:
Provide a URL of the form: http://host/media/1234 to Asterisk for media
playback. It fails to play and logs show the following error line:
[Sep 15 15:48:05] WARNING [29148] [C-00000092] file.c:
File http://host/media/1234 does not exist in any format
Scenario this issue is blocking:
In the case where the media files are stored in some cloud object store,
following can block the media being played via Asterisk:
Cloud storage generally needs authenticated access to the storage. The way
to do that is by using signed URIs. With the signed URIs there's no way to
preserve the name of the file.
In most cases Cloud storage returns a key to access the object and preserving
file name is also not a thing there
ASTERISK-27286
Reporter: Gaurav Khurana
Change-Id: I1b14692a49b2c1ac67688f58757184122e92ba89
The OPTIONS support in PJSIP has organically grown, like many things in
Asterisk. It has been tweaked, changed, and adapted based on situations
run into. Unfortunately this has taken its toll. Configuration file
based objects have poor performance and even dynamic ones aren't that
great.
This change scraps the existing code and starts fresh with new eyes. It
leverages all of the APIs made available such as sorcery observers and
serializers to provide a better implementation.
1. The state of contacts, AORs, and endpoints relevant to the qualify
process is maintained. This state can be updated by external forces (such
as a device registering/unregistering) and also the reload process. This
state also includes the association between endpoints and AORs.
2. AORs are scheduled and not contacts. This reduces the amount of work
spent juggling scheduled items.
3. Manipulation of which AORs are being qualified and the endpoint states
all occur within a serializer to reduce the conflict that can occur with
multiple threads attempting to modify things.
4. Operations regarding an AOR use a serializer specific to that AOR.
5. AORs and endpoint state act as state compositors. They take input
from lower level objects (contacts feed AORs, AORs feed endpoint state)
and determine if a sufficient enough change has occurred to be fed further
up the chain.
6. Realtime is supported by using observers to know when a contact has
been registered. If state does not exist for the associated AOR then it
is retrieved and becomes active as appropriate.
The end result of all of this is best shown with a configuration file of
3000 endpoints each with an AOR that has a static contact. In the old
code it would take over a minute to load and use all 8 of my cores. This
new code takes 2-3 seconds and barely touches the CPU even while dealing
with all of the OPTIONS requests.
ASTERISK-26806
Change-Id: I6a5ebbfca9001dfe933eaeac4d3babd8d2e6f082
Redirect libc allocation functions to use Asterisk functions for
main/ast_expr2f.c and res/ael/ael_lex.c. This will resolve errors
produced by astmm.h when these files are regenerated, though other
issues still remain.
ASTERISK~27813
Change-Id: I7263e9e4217a17bde4ffaa2087a8f8aeb2a8588c
Core bridging and, more specifically, bridge_softmix have been
enhanced to relay received frames of type TEXT or TEXT_DATA to all
participants in a softmix bridge. res_pjsip_messaging and
chan_pjsip have been enhanced to take advantage of this so when
res_pjsip_messaging receives an in-dialog MESSAGE message from a
user in a conference call, it's relayed to all other participants
in the call.
res_pjsip_messaging already queues TEXT frames to the channel when
it receives an in-dialog MESSAGE from an endpoint and chan_pjsip
will send an MESSAGE when it gets a TEXT frame. On a normal
point-to-point call, the frames are forwarded between the two
correctly. bridge_softmix was not though so messages weren't
getting forwarded to conference bridge participants. Even if they
were, the bridging code had no way to tell the participants who
sent the message so it would look like it came from the bridge
itself.
* The TEXT frame type doesn't allow storage of any meta data, such
as sender, on the frame so a new TEXT_DATA frame type was added that
uses the new ast_msg_data structure as its payload. A channel
driver can queue a frame of that type when it receives a message
from outside. A channel driver can use it for sending messages
by implementing the new send_text_data channel tech callback and
setting the new AST_CHAN_TP_SEND_TEXT_DATA flag in its tech
properties. If set, the bridging/channel core will use it instead
of the original send_text callback and it will get the ast_msg_data
structure. Channel drivers aren't required to implement this. Even
if a TEXT_DATA enabled driver uses it for incoming messages, an
outgoing channel driver that doesn't will still have it's send_text
callback called with only the message text just as before.
* res_pjsip_messaging now creates a TEXT_DATA frame for incoming
in-dialog messages and sets the "from" to the display name in the
"From" header, or if that's empty, the caller id name from the
channel. This allows the chat client user to set a friendly name
for the chat.
* bridge_softmix now forwards TEXT and TEXT_DATA frames to all
participants (except the sender).
* A new function "ast_sendtext_data" was added to channel which
takes an ast_msg_data structure and calls a channel's
send_text_data callback, or if that's not defined, the original
send_text callback.
* bridge_channel now calls ast_sendtext_data for TEXT_DATA frame
types and ast_sendtext for TEXT frame types.
* chan_pjsip now uses the "from" name in the ast_msg_data structure
(if it exists) to set the "From" header display name on outgoing text
messages.
Change-Id: Idacf5900bfd5f22ab8cd235aa56dfad090d18489
Adds the ability to receive and handle incoming NACK requests if
retransmissions are enabled. If retransmissions are enabled, a data
buffer is allocated that stores packets being sent. If a NACK request
is received, the packet requested for retransmission is sent if it is
still in the buffer. In the same request, if any of the following 16
packets are marked as not received, those will be sent as well if
available, as outlined in RFC4585.
Also changes RTCP RR and SR to use media source SSRC instead of packet
source SSRC when determining which instance to use for RTCP reports.
For more information, refer to the wiki page:
https://wiki.asterisk.org/wiki/display/AST/WebRTC+User+Experience+Improvements
ASTERISK-27806 #close
Change-Id: I7f7f124af3b9d5d2fd9cffc6ba8cb48a6fff06ec
Use of extended stringfields is a temporary mechanism to avoid ABI
breakage in released branches without resorting to more inconvienient
methods.
* Collect existing extended stringfields into the parent stringfield
section of the struct.
Change-Id: I8d46d037801b4518837c3ea4b6df95ceadc9436b
This reverts a problem introduced by the fix for ASTERISK_24329.
Now, when an announcement is played while waiting in a queue, music on
hold will not restart from the beginning of the sound file and will
instead pick up where it left off. However, the incorrect behavior in
ASTERISK_24329 is now present again; if an announcement X seconds
long is played when music on hold starts, music on hold will start X
seconds into the file.
ASTERISK-27774 #close
Reported by: lvl
Change-Id: I86b2885ee7063268f9b9747eddb788336ade989b
When a scheduled task is created you can pass in the
AST_SIP_SCHED_TASK_TRACK flag. This new flag causes scheduling events to
be logged.
Change-Id: I91967eb3d5a220915ce86881a28af772f9a7f56b
ast_sip_push_task_synchronous() did not necessarily execute the passed in
task under the specified serializer. If the current thread is any
registered pjsip thread then it would execute the task immediately instead
of under the specified serializer. Reentrancy issues could result if the
task does not execute with the right serializer.
The original reason ast_sip_push_task_synchronous() checked to see if the
current thread was a registered pjsip thread was because of a deadlock
with masquerades and the channel technology's fixup callback
(ASTERISK_22936). A subsequent masquerade deadlock fix (ASTERISK_24356)
involving call pickups avoided the original deadlock situation entirely.
The PJSIP channel technology's fixup callback no longer needed to call
ast_sip_push_task_synchronous().
However, there are a few places where this unexpected behavior is still
required to avoid deadlocks. The pjsip monitor thread executes callbacks
that do calls to ast_sip_push_task_synchronous() that would deadlock if
the task were actually pushed to the specified serializer. I ran into one
dealing with the pubsub subscriptions where an ao2 destructor called
ast_sip_push_task_synchronous().
* Split ast_sip_push_task_synchronous() into
ast_sip_push_task_wait_servant() and ast_sip_push_task_wait_serializer().
ast_sip_push_task_wait_servant() has the old behavior of
ast_sip_push_task_synchronous(). ast_sip_push_task_wait_serializer() has
the new behavior where the task is always executed by the specified
serializer or a picked serializer if one is not passed in. Both functions
behave the same if the current thread is not a SIP servant.
* Redirected ast_sip_push_task_synchronous() to
ast_sip_push_task_wait_servant() to preserve API for released branches.
ASTERISK_26806
Change-Id: Id040fa42c0e5972f4c8deef380921461d213b9f3
* Fix the periodic interval wander because it may take significant time
between the sched thread queueing the task in the serializer and the
serializer actually executing the task. The time it takes to actually
execute the task was already taken into account.
* Pass a schtd ref to the serializer when we queue a scheduled task on
the serializer. We don't want it going away on us while it is in the
serializer queue.
* Skip the scheduled task if the task was canceled between queueing the
task to the serializer and the serializer actually executing the task.
* Reorder struct ast_sip_sched_task to avoid unnecessary padding. Removed
task_id and added next_periodic.
* Hold a ref to the passed in serializer so the serializer cannot go away
on the scheduled task.
ASTERISK_26806
Change-Id: I6c8046b75f6953792c8c30e55b836a4291143f24
* A side benefit is that the scheduled tasks are not completely blocked
while the CLI command executes.
* Adjusted the "Task Name" column width to have more room for longer
names.
Change-Id: Iec64aa463ee8b10eef90120e00c38b1fb444087e
It now appends the external IP address on the
o= line of the SDP packet. The decision was made to write
the numeric IP address as opposed to the RFC that states
the FQDN should be used if and when available. We believe
the usage of literal IP address will help avoid
potential problems.
ASTERISK-27614 #close
Change-Id: I84f3360f3606b8c4e8d161edb228799ec0b8a302
This patch adds support to send in-dialog SIP NOTIFY commands on
chan_pjsip channels, similar to the functionality recently added
for chan_sip (ASTERISK_27461).
This extends res_pjsip_notify to allow for in-dialog messages.
ASTERISK-27697
Change-Id: If7f3151a6d633e414d5dc319d5efc1443c43dd29
* Removed several invalid uses of OBJ_NOLOCK. These uses resulted in the
'tasks' container being accessed without a lock in a multi-threaded
environment. A recipe for crashes.
* Removed needlessly obtaining schtd object references. If the caller
providing you a pointer to an object doesn't have a valid reference then
you cannot safely get one from it.
* Getting a ref to 'tasks' when you aren't copying the pointer into
another location is useless. The 'tasks' container pointer is global.
* Removed many unnecessary uses of RAII_VAR.
* Make ast_sip_schedule_task() name parameter const.
ASTERISK_26806
Change-Id: I5c62488e651314e2a1dbc01f5b078a15512d73db
There is a problem when an INVITE-with-Replaces transfer targets a channel
in a ConfBridge. The transfer will unconditionally swap out the
ConfBridge channel. Unfortunately, the ConfBridge state will not be aware
of this change. Unexpected behavior will happen as a result since
ConfBridge channels currently can only be replaced by a masquerade and not
normal bridge channel moves.
* We just need to pretend that the channel isn't in a bridge (like other
transfer methods already do) so the transfer channel will masquerade into
the ConfBridge channel.
Change-Id: I209beb0e748fa4f4b92a576f36afa8f495ba4c82
This change allows chan_pjsip to be given an AST_FRAME_RTCP
containing REMB feedback and pass it to res_rtp_asterisk.
Once res_rtp_asterisk receives the frame a REMB RTCP feedback
packet is constructed with the appropriate contents and sent
to the remote endpoint.
ASTERISK-27776
Change-Id: Ic53f821c1560d8924907ad82c4d9c0bc322b38cd
The previous payload specific feedback handling was very single
minded in that it just assumed everything should trigger a video
update. This was changed but the handling of picture loss indication
was not added. The result was that video may not flow. This change
adds it explicitly in.
Change-Id: I1894be02e39ee10a0af841b5a1dca5f0ec7d60b6
A deadlock can happen when the PJSIP monitor thread is shutting down a
connection oriented transport (TCP/TLS) used by a subscription at the same
time as another thread tries to send something for that subscription. The
deadlock is between the pjsip monitor thread attempting to get the dialog
lock and another thread sending something for that dialog when it tries to
get the transport manager lock.
* res_pjsip_pubsub.c: Avoid the deadlock by pushing the subscription
removal to the subscription serializer.
* res_pjsip_registrar.c: Pushed off incoming registration contact removals
to a default serializer as a precaution. Removing the contacts involves
sorcery access which in this case will involve database access. Depending
upon the setup, the database may not be on the same machine and could take
awhile. We don't want to hold up the pjsip monitor thread with
potentially long access times.
ASTERISK-27706
Change-Id: I56b647aea565f24dba33e9e5ebeed4cd3f31f8c4
Apparently it is possible for the transport to be destroyed without
triggering the transport callback logic. As a result the transport gets
destroyed and we have a stale pointer in the active_transports container.
* Invoke the transport monitor callback checks when the transport is
destroyed in addition to when it is disconnected and shutdown.
ASTERISK-27688
Change-Id: Ia9b5469fea8f2b3f2d8476fae6b748a4d23e7261
This change extends the existing AST_FRAME_RTCP frame type to be
able to contain additional RTCP message types, such as feedback
messages. The payload type is contained in the subclass which allows
knowing what is in the frame itself.
The RTCP feedback message type is now handled and REMB[1] messages
are raised with their containing information.
This also fixes a bug where all feedback messages were triggering
video updates instead of just FIR and FUR.
Finally RTCP frames are now passed up through the Asterisk core to
what is handling the channel, mapped appropriately in the case of
bridging, and written to an outgoing stream. Since RTCP frames are
on a per-stream basis this is only done on multistream capable
channels.
[1] https://tools.ietf.org/html/draft-alvestrand-rmcat-remb-03
ASTERISK-27758
ASTERISK-26366
Change-Id: I680da0ad8d5059d5e9655d896fb9d92e9da8491e
This change adds a property to RTP instances to indicate that
REMB support is enabled and that sending/receiving should be
passed through.
This also enables it on video RTP instances in PJSIP if
WebRTC support is enabled.
Finally the goog-remb extension is added to the SDP using
the rtcp-fb attribute to indicate our support for it.
Details about REMB can be found on the draft document for it:
https://tools.ietf.org/html/draft-alvestrand-rmcat-remb-03
Change-Id: I1902dda1c0882bd1a0d71b2f120684b44b97e789
Asterisk does not need the development package of libltdl, because it does not
use any symbol of -lltdl directly. Instead, it uses the runtime package via the
shared library -lodbc. On the supported platforms, that shared library declares
its dependency on -lltdl correctly, otherwise AST_EXT_LIB_CHECK would have
failed.
ASTERISK-27745
Change-Id: Icd315809b8e7978203431f3afb66240dd3a040ba
* acl (named_acl.c)
* cdr
* cel
* ccss
* dnsmgr
* dsp
* enum
* extconfig (config.c)
* features
* http
* indications
* logger
* manager
* plc
* sounds
* udptl
These modules are now loaded at appropriate time by the module loader.
Unlike loadable modules these use AST_MODULE_LOAD_FAILURE on error so
the module loader will abort startup on failure of these modules.
Some of these modules are still initialized or shutdown from outside the
module loader. logger.c is initialized very early and shutdown very
late, manager.c is initialized by the module loader but is shutdown by
the Asterisk core (too much uses it without holding references).
Change-Id: I371a9a45064f20026c492623ea8062d02a1ab97f
Since ASTERISK-27253, no symbols from the header srtp2/crypto_types.h are used
anymore. Therefore, its include statement can be removed. This allows to compile
Asterisk on platforms which do not offer this private header, like openSUSE.
ASTERISK-27733
Change-Id: I25c5cb8fa966043d1506ebef449e5a724412b4b6
The menuselect comment was updated to deprecate these modules but the
AST_MODULE_INFO block at the end of file was missed.
ASTERISK-27671
Change-Id: I63070b5c4d4f08af010c6034acd4793c1bcef839
Checking option_debug directly is incorrect as it ignores file/module
specific debug settings. This system-wide change replaces nearly all
direct checks for option_debug with the DEBUG_ATLEAST macro.
Change-Id: Ic342d4799a945dbc40ac085ac142681094a4ebf0
In handle_negotiated_sdp(), use session->active_media_state when
session->pending_media_state is empty. The 200's SDP should be fed into
handle_negotiated_sdp_session_media() together with the already negotiated
state, which is now in session->active_media_state instead. Only if both
the session's pending and active media are empty should
handle_negotiated_sdp() abort.
ASTERISK-27441
Change-Id: If0d5150ffe6f38d8a854831fef37942258d4629c
This allows asterisk to be compiled with MALLOC_DEBUG to load modules
built without MALLOC_DEBUG. Now pre-compiled third-party modules will
still work regardless of MALLOC_DEBUG being enabled or not.
Change-Id: Ic07ad80b2c2df894db984cf27b16a69383ce0e10
The pool cache gets in the way of finding use after free errors of memory
pool contents. Tools like valgrind and MALLOC_DEBUG don't know when a
pool is released because it gets put into the cache instead of being
freed.
* Added the "cache_pools" option to pjproject.conf. Disabling the option
helps track down pool content mismanagement when using valgrind or
MALLOC_DEBUG. The cache gets in the way of determining if the pool
contents are used after free and who freed it.
To disable the pool caching simply disable the cache_pools option in
pjproject.conf and restart Asterisk.
Sample pjproject.conf setting:
[startup]
cache_pools=no
* Made current users of the caching pool factory initialization and
destruction calls call common routines to create and destroy cached pools.
ASTERISK-27704
Change-Id: I64d5befbaeed2532f93aa027a51eb52347d2b828
A couple of additional properties are needed in rtp_engine to enable
support for packet retransmission: AST_RTP_PROPERTY_RETRANS_RECV and
AST_RTP_PROPERTY_RETRANS_SEND. These will both be enabled automatically
if an endpoint has the webrtc option enabled. While this adds no
functionality currently, it will serve as a building block for future
changes for RTP retransmission support.
For more information, refer to the wiki page:
https://wiki.asterisk.org/wiki/display/AST/WebRTC+User+Experience+Improvements
Change-Id: Ic598acd042a045f9d10e5bdccb66f4efc9e587cc
The transferrer's session channel was destroyed by the transferrer's
serializer thread in a race condition with the transfer target's
serializer thread during an attended transfer. The transfer target's
serializer was attempting to clean up a deferred end status on behalf of
the transferrer's channel when it should have passed the action to the
transferrer's serializer. When the transfer target's serializer lost the
race then both threads wind up trying to end the transferrer's session.
* Push the ast_sip_session_end_if_deferred() call onto the transferrer's
serializer to avoid a race condition that results in a crash. The
session_end() function that could be called by
ast_sip_session_end_if_deferred() really must be executed by the
transferrer's serializer to avoid this kind of crash.
ASTERISK-27568
Change-Id: Iacda724e7cb24d7520e49b2fd7e504aa398d7238
In ast_websocket_read() we were not adequately checking that the
payload_len was non-zero before passing it to ws_safe_read(). Calling
ws_safe_read with a len argument of 0 will result in a busy loop until
the underlying socket is closed.
ASTERISK-27658 #close
Change-Id: I9d59f83bc563f711df1a6197c57de473f6b0663a
Since res_pjsip_transport_management provides several attack
mitigation features, its functionality moved to res_pjsip and
this module has been removed. This way the features will always
be available if res_pjsip is loaded.
ASTERISK-27618
Reported By: Sandro Gauci
Change-Id: I21a2d33d9dda001452ea040d350d7a075f9acf0d
pjsip_distributor:
authenticate() creates a tdata and uses it to send a challenge or
failure response. When pjsip_endpt_send_response2() succeeds, it
automatically decrements the tdata ref count but when it fails, it
doesn't. Since we weren't checking for a return status, we weren't
decrementing the count ourselves on error and were therefore leaking
tdatas.
res_pjsip_session:
session_reinvite_on_rx_request wasn't decrementing the ref count
if an error happened while sending a 491 response.
pre_session_setup wasn't decrementing the ref count if
while sending an error after a pjsip_inv_verify_request failure.
res_pjsip:
ast_sip_send_response wasn't decrementing the ref count on error.
ASTERISK-27618
Reported By: Sandro Gauci
Change-Id: Iab33a6c7b6fba96148ed465b690ba8534ac961bf
It was discovered that there are some corner cases where a pjsip tsx
might have no last_tx so calling ast_sip_failover_request with
a NULL last_tx as its tdata would cause a crash.
ASTERISK-27618
Reported By: Sandro Gauci
Change-Id: Ic2b63f6d4ae617c4c19dcdec2a7a6156b54fd15b
When receiving a SUBSCRIBE request the Accept headers from it are
stored locally. This operation has a fixed limit of 32 Accept headers
but this limit was not enforced. As a result it was possible for
memory outside of the allocated space to get written to resulting
in a crash.
This change enforces the limit so only 32 Accept headers are
processed.
ASTERISK-27640
Reported By: Sandro Gauci
Change-Id: I99a814b10b554b13a6021ccf41111e5bc95e7301
If the ICE role is not set right away, we might have a role conflict
that stays undetected and ICE finishing with successful tests and no
candidate nominated. This was introduced by ASTERISK-27088.
To avoid this, we set the role as soon as before but only if the ICE
state permits it: still checking and not yet nominating candidates or
completed.
ASTERISK-27646
Change-Id: I5dbc69ad63cacbb067922850fbb113d479bd729c
* Prefer strcasecmp() over stricmp()
* Use a list with no lock since we never actually lock
* Minor cleanups to error messages
Change-Id: I8446f44795ee8f3072e1c1f9193c6912dfc0c42b
There is a dedicated slot in the pjsip_sip_uri for the 'user'
parameter, so use that instead of adding to the list of generic URI
parameters.
Change-Id: I0a0ce8a60ecee27489735bf56fd707719d8c2ed6
* app_fax (replaced by res_fax).
* res_config_sqlite (replaced by res_config_sqlite3).
* res_monitor (replaced by app_mixmonitor).
This is related to ASTERISK~23657 but does not resolve that ticket.
Resolving that ticket would require complete removal of res_monitor.
ASTERISK-27671 #close
Change-Id: I16a3edd61fc1abd4a7b2e9357693ed663f62dd49
res_pjsip_endpoint_identifier_user.c:
* Fix copy/paste error in find_endpoint(). We were using a constant
"anonymous" string instead of the passed in endpoint_name when checking
the transport domain for an endpoint match.
* Eliminate RAII_VAR in find_endpoint().
* Remove always true check in find_transport_state_in_use().
* Remove useless CMD_STOP in find_transport_state_in_use().
res_pjsip_endpoint_identifier_anonymous.c:
* Eliminate RAII_VAR in anonymous_identify().
* Remove always true check in find_transport_state_in_use().
* Remove useless CMD_STOP in find_transport_state_in_use().
Change-Id: I86924c31db5bd225ca0c1219c761b668c6f91189
pjproject does not have a function to reverse pjsip_inv_usage_init.
This means we need to ignore any calls to the functions once shutdown is
final.
ASTERISK-27571 #close
Change-Id: Ia550fcba563e2328f03162d79fb185f16b7c9b9d
In an earlier release, inbound registrations on a reliable transport
were pruned on Asterisk restart since the TCP connection would have
been torn down and become unusable when Asterisk stopped. This same
process is now also applied to inbound subscriptions.
Also fixed issues in res_pjsip_registrar where it wasn't handling the
monitoring correctly when multiple registrations came in over the same
transport.
To accomplish this, the pjsip_transport_event feature needed to
be refactored to allow multiple monitors (multiple subcriptions or
registrations from the same endpoint) to exist on the same transport.
Since this changed the API, any external modules that may have used the
transport monitor feature (highly unlikey) will need to be changed.
ASTERISK-27612
Reported by: Ross Beer
Change-Id: Iee87cf4eb9b7b2b93d5739a72af52d6ca8fbbe36
This removes references that are no longer needed due to automatic
references created by module dependencies.
In addition this removes most calls to ast_module_check as they were
checking modules which are listed as dependencies.
Change-Id: I332a6e8383d4c72c8e89d988a184ab8320c4872e
I've audited all modules that include any header which includes
asterisk/optional_api.h. All modules which use OPTIONAL_API now declare
those dependencies in AST_MODULE_INFO using requires or optional_modules
as appropriate.
In addition ARI dependency declarations have been reworked. Instead of
declaring additional required modules in res/ari/resource_*.c we now add
them to an optional array "requiresModules" in api-docs for each module.
This allows the AST_MODULE_INFO dependencies to include those missing
modules.
Change-Id: Ia0c70571f5566784f63605e78e1ceccb4f79c606
The type=identify endpoint identification method can match by IP address
and by SIP header. However, the SIP header matching has limited
usefulness because you cannot specify the SIP header matching priority
relative to the IP address matching. All the matching happens at the same
priority and the order of evaluating the identify sections is
indeterminate. e.g., If you had two type=identify sections where one
matches by IP address for endpoint alice and the other matches by SIP
header for endpoint bob then you couldn't predict which endpoint is
matched when a request comes in that matches both.
* Extract the SIP header matching criteria into its own "header" endpoint
identification method so the user can specify the relative priority of the
SIP header and the IP address matching criteria in the global
endpoint_identifier_order option. The "ip" endpoint identification method
now only matches by IP address.
ASTERISK-27491
Change-Id: I9df142a575b7e1e3471b7cda5d3ea156cef08095
* Declare 'requires' and 'enhances' text fields on module info structure.
* Rename 'nonoptreq' to 'optional_modules'.
* Update doxygen comments.
Still need to investigate dependencies among modules I cannot compile.
Change-Id: I3ad9547a0a6442409ff4e352a6d897bef2cc04bf
We did this for TCP transports already but I'm not sure why we
didn't do it for TLS transports.
ASTERISK_27474 #not_final_fix
Change-Id: I5b1ef4b882f7b859e718236686b7898751dbb262
If any component of ast_config_AST_RECORDING_DIR is a symbolic link we
would incorrectly assume the ARI user was trying to escape the recording
path. Create additional check to check the recording directory's
realpath, only deny access if both do not match.
This is needed by the testsuite when run by 'run-local'.
Change-Id: I9145e841865edadcb5f75cead3471ad06bbb56c0
The requirement that "ip" must be in the endpoint identify_by list to
allow the type=identify method to identify the endpoint is not necessary.
The "ip" identifier method can match one and only one endpoint. To even
work, the "ip" identifier method configuration must explicitly specify the
identified endpoint. Therefore, why bother configuring the type=identify
identifier in the first place? The requirement only adds the potential
for configuration errors for no benefit. Even worse, those configuration
errors cannot be detected when the configuration loads. The requirement
was introduced with the ASTERISK_27206 patch.
* Remove the code change that enforces the requiremnt. Listing the "ip"
method in the identify_by value is simply documentation.
Change-Id: Ia057f92a33fb5d9f51dc5d5692e3d5ee1a6f2c11
* Extracted sip_endpoint_identifier_type2str() and
sip_endpoint_identifier_str2type() to simplify the calling functions.
* Fixed pjsip_configuration.c:ident_to_str() building the endpoint's
identify_by value string.
Change-Id: Ide876768a8d5d828b12052e2a75008b0563fc509
The AMI PJSIPShowEndpoint action could only list one IdentifyDetail AMI
event per endpoint. However, there is no reason that multiple
type=identify sections cannot identify the same endpoint.
* Reworked format_ami_endpoint_identify() to generate as many
IdentifyDetail AMI events as there are matching identifiers.
Change-Id: Ie146792aef72d78e05416ab5b27bc552a30399db
Some WebRTC clients can't handle renegotiation with the addition of
streams that include an offer to bundle. They instead expect the
newly added streams to already be bundled. This change does such a thing
if WebRTC support is enabled on an endpoint.
ASTERISK-27566
Change-Id: I7fe9b7ac35a2798627d9c2c8369129f407af6461
In addition to being a micro-optimization (RAII_VAR has overhead), this
change improves output of REF_DEBUG. Unfortunately when RAII_VAR calls
ao2_cleanup it does so from a generated _dtor_varname function. For
example this caused _dtor_app to release a reference instead of
__stasis_app_unregister.
Change-Id: I4ce67120583a446babf9adeec678b71d37fcd9e5
If the dial bridge has been created it must be released by calling
ast_bridge_destroy, simply releasing the ao2 reference is not enough.
Also move stasis_app_control_shutdown earlier in unload to ensure the
bridge cannot be created or grabbed after the app_bridges container is
released.
Change-Id: I372302de94ca63876069e2585a049c5060e5e767
Instead of searching for bridge_id provided in an argument this function
always searched for BRIDGE_ALL first. Rewrite this function to work
like the similar functions for channel and endpoint functions.
Change-Id: Ib5caca69e11727c5c8a7284a1d00621f40f1e60a
Some (normally optional) modules created notices, warnings, and even errors
in normal situations like (un)load. This cluttered the command-line interface
(CLI) on start and while stopping gracefully. However, when an user went for
the script './contrib/scripts/install_prereq', those modules get compiled-in
because their prerequisites were met at compile time. Furthermore, because of
ASTERISK_27475, the former talkative module 'res_curl' is built as side-effect.
ASTERISK-27553
Change-Id: I9f105f46d72553994e820679bfde3478a551b281
The ip_identify_apply() did not validate the configuration for simple
static configuration errors or deal well with address resolution errors.
* Added missing configuration validation checks.
* Fixed address resolution error handling.
* Demoted an error message to a warning since it does not fail applying
the identify object configuration.
Change-Id: I8b519607263fe88e8ce964f526a45359fd362b6e
If an endpoint identifier name in the endpoint_identifier_order list is a
prefix to the identifier we are registering, we could install it in the
wrong position of the list.
Assuming
endpoint_identifier_order=username,ip,anonymous
then registering the "ip_only" identifier would put the identifier in the
wrong position of the priority list.
* Fix incorrect strncmp() string prefix matching.
Change-Id: Ib8819ec4b811da8a27419fd93528c54d34f01484
This function returns NULL if the module in question is not running. I
did not change ast_module_ref as most callers do not check the result
and they always call ast_module_unref.
Make use of this function when running registered items from:
* app_stack API's
* bridge technologies
* CLI commands
* File formats
* Manager Actions
* RTP engines
* Sorcery Wizards
* Timing Interfaces
* Translators
* AGI Commands
* Fax Technologies
ASTERISK-20346 #close
Change-Id: Ia16fd28e188b2fc0b9d18b8a5d9cacc31df73fcc
The pjsip_msg_find_hdr function can return NULL. This patch adds a check
when searching for the sequence header to make sure a NULL pointer is never
de-referenced.
Change-Id: I19af23aeeded65be016be92360e8cb7ffe51fad2
Per RFC 5245, the foundation specified with an ICE candidate can be up
to 32 characters but we are only allowing for 31.
ASTERISK-27498 #close
Reported by: Michele Prà
Change-Id: I05ce7a5952721a76a2b4c90366168022558dc7cf
Those SIP messages that create dialogs require a contact header to be present.
If the contact header was missing from the message it could cause Asterisk to
crash.
This patch checks to make sure SIP messages that create a dialog contain the
contact header. If the message does not and it is required Asterisk now returns
a "400 Missing Contact header" response. Also added NULL checks when retrieving
the contact header that were missing as a "just in case".
ASTERISK-27480 #close
Change-Id: I1810db87683fc637a9e3e1384a746037fec20afe
Fix instances of:
* Retreive
* Recieve
* other then
* different then
* Repeated words ("the the", "an an", "and and", etc).
* othterwise, teh
ASTERISK-24198 #close
Change-Id: I3809a9c113b92fd9d0d9f9bac98e9c66dc8b2d31
Some variables are set and never changed, making them constant. This
means that code in the 'false' block of the conditional is unreachable.
In chan_skinny and res_config_ldap I used preprocessor directive `#if 0`
as I'm unsure if the unreachable code could be enabled in the future.
Change-Id: I62e2aac353d739fb3c983cf768933120f5fba059
When RTCP-MUX enabled. rtp->s is the same as rtcp->s, check this before
close the file descriptor. Close the FD twice will hangs the asterisk
under heavy load.
ASTERISK-27299 #close
Reported-by: Aaron An
Tested-by: AaronAn
Change-Id: I870a072d73fd207463ac116ef97100addbc0820a
Remove nearly all use of regex from ACO users. Still remaining:
* app_confbridge has a legitamate use of option name regex.
* ast_sorcery_object_fields_register is implemented with regex, all
callers use simple prefix based regex. I haven't decided the best
way to fix this in both 13/15 and master.
Change-Id: Ib5ed478218d8a661ace4d2eaaea98b59a897974b
When adding shutdown refs for OPTIONAL_API components I accidentally
added it to the unload_module function in res_smdi. Move it to
load_module.
Change-Id: I2b9da38fbc11ef78ea23dbb2df92b684be7f647c
res_hep_pjsip.so and res_hep_rtcp.so will still load and do a lot of
unnecessary work even if 'enabled' is set to 'no' in hep.conf.
Change-Id: I3eddfeea09c6b5bc7c641952ee0ae487fd09b64b
George Joseph
Sean Bright
Alexei Gradinari
Friendly Automation
Joshua Colp
Kevin Harwell
Matthew Fredrickson
sungtae kim
Torrey Searle
Ben Ford
Jeremy Lainé
Xiemin Chen
Sebastian Damm
Sungtae Kim
Corey Farrell
Chris-Savinovich
Nick French
Richard Mudgett
Moritz Fain
Walter Doekes
Frederic LE FOLL
neutrino88
Alexander Traud
Salah Ahmed
Florian Floimair
Joshua Elson
Gaurav Khurana
Nathan Bruning
Ross Beer
lvl
Thomas Guebels
Aaron An