MODULEINFO is checked while buidling/linking the module.
AST_MODULE_INFO is checked while loading/running the module.
ASTERISK-28838
Change-Id: I4bb868532ca217fec1351885d99eb55c21b58042
When the receive buffer was flushed by a received packet while it
already contained a packet with the same sequence number, Asterisk
never left the while loop which tried to order the packets.
This change makes it so if the packet is in the receive buffer it
is retrieved and freed allowing the buffer to empty.
ASTERISK-28827
Change-Id: Idaa376101bc1ac880047c49feb6faee773e718b3
When the ast_data_buffer_put rejects to add a packet, for example because
the buffer already contains a packet with the same sequence number, the
payload will never be freed, resulting in a memory leak.
The data buffer will now return an error if this situation occurs
allowing the caller to free the payload. The res_rtp_asterisk module
has also been updated to do this.
ASTERISK-28826
Change-Id: Ie6c49495d1c921d5f997651c7d0f79646f095cf1
By using pjproject to give us a list of candidates, and then filtering,
if the host has >32 addresses configured, then it is possible that we
end up filtering out all 32 of those, and ending up with no candidates
at all. Instead, get getifaddrs (which pjsip is using underlying
anyway) to retrieve all local addresses, and iterate those, adding the
first 32 addresses not excluded by the ICE ACL.
In our setup at any point in time We've got between 6 and 328 addresses
on any given system. The lower limit is the lower limit but the upper
limit is growing on a near daily basis currently.
Change-Id: I109eaffc3e2b432f00bf958e3caa0f38cacb4edb
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
This reverts commit a3a2fbaec6.
Reason for revert: There is a lot of code that relies on the broken
behavior that this fixes.
Change-Id: I410c395a0168acbdaf89e616e3cb5e1312d190cb
When an AOR is modified endpoints are updated that reference
the AOR so they can start receiving updates and reflect the
correct state. If this is the case then we shouldn't change
the endpoint to be offline if it does not reference the AOR
but instead only when the endpoint is completely updated for
all its AORs.
ASTERISK-28056
patches:
pjsip_options-aor.diff submitted by jhord (license 6978)
Change-Id: I3ee00023be2393113cd4e056599f23f3499ef164
This unit test runs through combinations of...
* Local codecs
* Remote Codecs
* Codec Preference
* Incoming/Outgoing
A few new APIs were created to make it easier to test
the functionality but didn't result in any actual
functional change.
ASTERISK_28777
Change-Id: Ic8957c43e7ceeab0e9272af60ea53f056164f164
Based on this new endpoint setting, a joint list of preferred codecs
between those received from the Asterisk core (remote), and those
specified in the endpoint's "allow" parameter (local) is created and
is used to create the outgoing SDP offer.
* Add outgoing_call_offer_pref to pjsip_configuration (endpoint)
* Add "call_direction" to res_pjsip_session.
* Update pjsip_session_caps.c to make the functions more generic
so they could be used for both incoming and outgoing.
* Update ast_sip_session_create_outgoing to create the
pending_media_state->topology with the results of
ast_sip_session_create_joint_call_stream().
* The endpoint "preferred_codec_only" option now automatically sets
AST_SIP_CALL_CODEC_PREF_FIRST in incoming_call_offer_pref.
* A helper function ast_stream_get_format_count() was added to
streams to return the current count of formats.
ASTERISK-28777
Change-Id: Id4ec0b4a906c2ae5885bf947f101c59059935437
This change provides functions that take in a JSON payload, verify that
the contents contain all the mandatory fields and required values (if
any), and signs the payload with the private key. Four fields are added
to the payload: x5u, attest, iat, and origid. As of now, these are just
placeholder values that will be set to actual values once the logic is
implemented for what to do when an actual payload is received, but the
functions to add these values have all been implemented and are ready to
use. Upon successful signing and the addition of those four values, a
ast_stir_shaken_payload is returned, containing other useful information
such as the algorithm and signature.
Change-Id: I74fa41c0640ab2a64a1a80110155bd7062f13393
RFC5621 requires any content type with a Content-Disposition
with handling=required to be rejected with a 415 response
ASTERISK-28782 #close
Change-Id: Iad969df75936730254b95c1a8bc3b48497070bb4
When an outgoing channel is created a list of formats may
optionally be provided which is used as a request that the
formats be used if possible. If an endpoint is not configured
for any of the formats we ignore this request and use what is
configured. This has the side effect of also including other
stream types (such as video) that were not present in the
requested formats.
This change makes it so that the intention of the request is
preserved - that is if only an audio format is requested then
even if there is no joint audio format between the request and
the configuration we will still only place an audio stream in
the outgoing call.
ASTERISK-28787
Change-Id: Ia54c0c63e94aca176169b9bae4bb8a8380ea245f
This commit sets up some of the initial framework for the module and
adds a way to read the private key from the specified file, which will
then be appended to the certificate object. This works fine for now, but
eventually some other structure will likely need to be used to store all
this information. Similarly, the caller_id_number is specified on the
certificate config object, but in the end we will want that information
to be tied to the certificate itself and read it from there.
A method has been added that will retrieve the private key associated
with the caller_id_number passed in. Tab completion for certificates and
stores has also been added.
Change-Id: Ic4bc1416fab5d6afe15a8e2d32f7ddd4e023295f
When examining a stream to determine hold/unhold information we
only care about the default audio stream. Other streams aren't
used for hold/unhold.
ASTERISK-28784
Change-Id: I7a1f10f07822c4aee1f98a38b9628849b578afe4
When the Asterisk receives 200 OK with invalid SDP,
the Asterisk/PJPROJECT terminating the session.
But if the channel was in the Bridge, Asterisk tries send
the Re-Invite before terminating the session.
And when the Asterisk sending the Re-Invite, it doesn't check
the SDP is NULL or not. This crashes the Asterisk.
Fixed it to close the session correctly if the UAS sends the
200 OK with wrong SDP.
ASTERISK-28743
Change-Id: Ifa864e0e125b1a7ed2f3abd4164187e1dddc56da
The state of the default audio stream is used for hold/unhold so we
restrict it to sendrecv as the core does not handle when it changes as
a result of hold/unhold.
This restriction does not apply to other media types though so we now
only restrict it to audio. This allows the other default streams to
store their state at all values, and not just sendrecv and removed.
ASTERISK-28783
Change-Id: I139740f38cea7f7d92a876ec2631ef50681f6625
Do not hang up a PJSIP channel on RTP timeout if that channel is in
a direct-media bridge. Also reset the time of the last received RTP packet when
direct-media ends (wait full rtp_timeout period before checking first time after
audio came back to Asterisk).
ASTERISK-28774
Reported-by: Michael Neuhauser
Change-Id: I8b62012be7685849e8fb2b1c5dd39d35313ca2d1
A pure blacklist is not good enough, we need a whitelist mechanism as
well, and the simplest way to do that is to re-use existing ACL
infrastructure.
This makes it simpler to blacklist say an entire block (/24) except a
smaller block (eg, a /29 or even a /32). Normally you'd need to
recursively split the block, so if you want to blacklist a /24 except
for a /29 you'd end up with a blacklit for a /25, /26, /27 and /28. I
feel that having an ACL instead of a blacklist only is clearer.
Change-Id: Id57a8df51fcfd3bd85ea67c489c85c6c3ecd7b30
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
bridge_p2p_rtp_write will forward rtp to the bridged rtp instance
without modifying the ssrc. However, it is not updating the SSRC
in the bridged rtp. Thus, when SSRC packets are generated, they
have the correct SSRC for the sender.
ASTERISK-28773 #close
Change-Id: I39f923bde28ebb4f0fddc926b92494aed294a478
If ICE support is enabled but not negotiated, the rtp->ice structure is
not being destroyed. This leads to Asterisk waiting for ICE to complete
instead of immediately starting the DTLS handshake, resulting in the
call leg having no RTP.
ASTERISK-28769 #close
Change-Id: I17c137546dc9ecfb9583c24dcf4c2ced8bbd7a27
This change introduce a CLI command for the RTP to display the general
configuration.
In the first step add the follow fields of the configurations:
- rtpstart
- rtpend
- dtmftimeout
- rtpchecksum
- strictrtp
- learning_min_sequential
- icesupport
Change-Id: Ibe5450898e2c3e1ed68c10993aa1ac6bf09b821f
Add a new option, incoming_call_offer_pref, to res_pjsip endpoints that
specifies the preferred order of codecs after receiving an offer.
This patch does the following:
Adds a new enumeration, ast_sip_call_codec_pref, used by the the new
configuration option that's added to the endpoint media structure.
Adds a new ast_sip_session_caps structure that's set for each session media
object.
Creates a new file, res_pjsip_session_caps that "implements" the new
structure and option, and is compiled into the res_pjsip_session library.
ASTERISK-28756 #close
Change-Id: I35e7a2a0c236cfb6bd9cdf89539f57a1ffefc76f
The receive buffer will now grow if we end up flushing the
receive queue after not receiving the expected packet in time.
This is done in hopes that if this is encountered again the
extra buffer size will allow more time to pass and any missing
packets to be received.
The send buffer will now grow if we are asked for packets and
can't find them. This is done in hopes that the packets are
from the past and have simply been expired. If so then in
the future with the extra buffer space the packets should be
available.
Sequence number cycling has been handled so that the
correct sequence number is calculated and used in
various places, including for sorting packets and
for determining if a packet is old or not.
NACK sending is now more aggressive. If a substantial number
of missing sequence numbers are added a NACK will be sent
immediately. Afterwards once the receive buffer reaches 25%
a single NACK is sent. If the buffer continues to grow and
reaches 50% or greater a NACK will be sent for each received
future packet to aggressively ask the remote endpoint to
retransmit.
ASTERISK-28764
Change-Id: I97633dfa8a09a7889cef815b2be369f3f0314b41
When a text message was received any associated variable was not written to
the ARI TextMessageReceived event. This occurred because Asterisk only wrote
out "send" variables. However, even those "send" variables would fail ARI
validation due to a TextMessageVariable formatting bug.
Since it seems the TextMessageReceived event has never been able to include
actual variables it was decided to remove the TextMessageVariable object type
from ARI, and simply return a JSON object of key/value pairs for variables.
This aligns more with how the ARI sendMessage handles variables, and other
places in ARI.
ASTERISK-28755 #close
Change-Id: Ia6051c01a53b30cf7edef84c27df4ed4479b8b6f
Update the state of remote_hold immediately on receipt of remote
SDP so that the information is available when building the SDP
answer
ASTERISK-28754 #close
Change-Id: I7026032a807e9c95081cb8f060400b05deb4836f
This change extends the Sorcery API to allow a wizard to be
told to explicitly reload objects or a specific object type
even if the wizard believes that nothing has changed.
This has been leveraged by res_pjsip and res_pjsip_acl to
reload endpoints and PJSIP ACLs when a named ACL changes.
ASTERISK-28697
Change-Id: Ib8fee9bd9dd490db635132c479127a4114c1ca0b
In order to retry outbound registrations for some situations, we
need access to the tdata from the original request. For instance,
for 401/407 responses we need it to properly construct the
subsequent request with the authentication. We also need it if
we're iterating over a DNS SRV response record set so we can skip
entries we've already tried.
We've been getting the tdata from the server response rdata and
transaction but that only works for the failures where there was
actually a response (4XX, 5XX, etc). For timeouts there's no
response and therefore no rdata or transaction from which to get
the tdata. When processing a single A/AAAA record for a server,
this wasn't an issue as we just retried that same server after the
retry timer expired. If we got an SRV record set for the server
though, without the state from the tdata, we just kept trying the
first entry in the set repeatedly instead of skipping to the next
one in the list.
* Added a "last_tdata" member to the client state structure to keep
track of the sent tdata.
* Updated registration_client_send() to save the tdata it used into
the client_state.
* Updated sip_outbound_registration_response_cb() to use the tdata
saved in client_state when we don't get a response from the
server. We still use the tdata from the transaction when we DO
get a response from the server so we can properly handle 4XX
responses where our new request depends on it.
General note on timeouts:
Although res_pjsip_outbound_registration skips to the next record
immediately when a timeout occurs during SRV set traversal, it's
pjproject that determines how long to wait before a timeout is
declared. As with other SIP message types, pjproject will continue
trying the same server at an interval specified by "timer_t1" until
"timer_b" expires. Both of those timers are set in the pjsip.conf
"system" section.
ASTERISK-28746
Change-Id: I199b8274392d17661dd3ce3b4d69a3968368fa06
This change adds support to bridge_softmix to allow the addition
and removal of additional video source streams. When such a change
occurs each participant is renegotiated as needed to reflect the
update. If another video source is added then each participant
gets another source. If a video source is removed then it is
removed from each participant. This functionality allows you to
have both your webcam and screenshare providing video if you
desire, or even more streams. Mapping has been changed to use
the topology index on the source channel as a unique identifier
for outgoing participant streams, this will never change and
provides an easy way to establish the mapping.
The bridge_simple and bridge_native_rtp modules have also been
updated to renegotiate when the stream topology of a party changes
allowing the same behavior to occur as added to bridge_softmix.
If a screen share is added then the opposite party is renegotiated.
If that screen share is removed then the opposite party is
renegotiated again.
Some additional fixes are also included in here. Stream state is
now conveyed in SDP so sendonly/recvonly/inactive streams can
be requested. Removed streams now also remove previous state
from themselves so consumers don't get confused.
ASTERISK-28733
Change-Id: I93f41fb41b85646bef71408111c17ccea30cb0c5
When handling ICE negotiations, it's possible that there can be a delay
between STUN binding requests which in turn will cause a delay in ICE
completion, preventing media from flowing. It should be possible to send
media when there is at least one valid pair, preventing this scenario
from occurring.
A change was added to PJPROJECT that adds an optional callback
(on_valid_pair) that will be called when the first valid pair is found
during ICE negotiation. Asterisk uses this to start the DTLS handshake,
allowing media to flow. It will only be called once, either on the first
valid pair, or when ICE negotiation is complete.
ASTERISK-28716
Change-Id: Ia7b68c34f06d2a1d91c5ed51627b66fd0363d867
When moh_passthrough is used, asterisk is only generating invites
of type sendonly and sendrecv instead of taking fully into account
the on hold state of the local and remote parties
ASTERISK-28738 #close
Change-Id: Iaaad9fbc033cb14803d433b8a4071bc337047761
There was a race condition between client initiated DTLS setup, and handling
of server side ice completion that caused the underlying SSL object to get
cleared during DTLS initialization. If this happened Asterisk would be left
in a partial DTLS setup state. RTP packets were sent and received, but were
not being encrypted and decrypted. This resulted in no audio, or static.
Specifically, this occurred when '__rtp_recvfrom' was processing the handshake
sequence from the client to the server, and then 'ast_rtp_on_ice_complete'
gets called from another thread and clears the SSL object when calling the
'dtls_perform_setup' function. The timing had to be just right in the sense
that from the external SSL library perspective SSL initialization completed
(rtp recv), Asterisk clears/resets the SSL object (ice done), and then checks
to see if SSL is intialized (rtp recv). Since it was cleared, Asterisk thinks
it is not finished, thus not completing 'dtls_srtp_setup'.
This patch removes calls to 'dtls_perform_setup', which clears the SSL object,
in 'ast_rtp_on_ice_complete'. When ice completes, there is no reason to clear
the underlying SSL object. If an ice candidate changes a full protocol level
renegotiation occurs. Also, in the case of bundled ICE candidates are reused
when a stream is added. So no real reason to have to clear, and reset in this
instance.
Also, this patch adds a bit of extra logging to aid in diagnosis of any future
problems.
ASTERISK-28742 #close
Change-Id: I34c9e6bad5a39b087164646e2836e3e48fe6892f
The change to res_config_odbc that allowed empty strings to be
returned to realtime consumers¹ causes a warning to be emitted when
loading MoH classes. So we need to treat an empty 'format' as if it
was not specified to avoid the warning.
ASTERISK-28735 #close
Reported by: Ross Beer
[1] https://gerrit.asterisk.org/c/asterisk/+/13722
Change-Id: I9a271d721e1a0973e80ebe7d75b46a0d8fa0e5a5
Given a scenario where session refreshes occur close to
each other while another is finishing it was possible for
the session refreshes to occur out of order. It was
also possible for session refreshes to be delayed for
quite some time if a session refresh did not result in
a topology change.
For the out of order session refreshes the first session
refresh would be queued due to a transaction in progress.
This transaction would then finish. When finished a
separate task to process the delayed requests queue
would be queued for handling. A second refresh would
be requested internally before this delayed request
queued task was processed. As no transaction was in
progress this session refresh would be immediately
handled before the queued session refresh.
The code will now check if any delayed requests exist
before allowing a session refresh to immediately occur.
If any exist then the session refresh is queued.
For the delayed session refreshes if a session refresh
did not result in a topology change the attempt would
be immediately stopped and no other delayed requests would
be processed.
The code will now go through the entire delayed requests
queue until a delayed request results in a request
actually being sent.
ASTERISK-28730
Change-Id: Ied640280133871f77d3f332be62265e754605088
The code assumed that when the transport-cc feedback
function was called at least one packet will have been
received. In practice this isn't always true, so now
we just reschedule the sending and do nothing.
Change-Id: Iabe7b358704da446fc3b0596b847bff8b8a0da6a
When res_config_odbc (and perhaps other realtime backends) reads a SQL
NULL from the database, it coalesces the value to the empty string
which prevents it from being returned to the realtime core.
However, if it instead reads the empty string from the database, it
needs a way to encode that fact without having the value omitted
entirely. It does this by changing the value to a string with a single
space. The realtime code in main/config.c recognizes this special case
and _turns the string back into the empty string_ before passing it to
realtime API consumers.
For all of this to work, we need to ensure that we actually pass the
single-space-string back to the realtime core, which is currently
failing because we are trimming the value before checking its
content. So instead we now special case the single-space-string case
so that empty values are returned properly.
ASTERISK-28719 #close
Reported by: EDV O-TON
Change-Id: I673ed8c31ad037aa224e80c78c7a1dc4e4a4e3de
Incrementing stasis_app_playback.media_index directly in our playback
loop means that when we reach the end of our playlist the index into
the vector will be outside of the bounds of the vector.
Instead use a temporary variable and only assign when we're sure that
we are in bounds.
ASTERISK-28713 #close
Reported by: Sébastien Duthil
Change-Id: Ib53f7f156097e0607eb5871d9d78d246ed274928
Each subscription needs to have a reference to the persisted data
for it, as well as the main JSON contained within the tree. When
recreating a subscription this did not occur and they both shared
the same reference.
ASTERISK-28714
Change-Id: I706abd49ea182ea367a4ac3feca2706460ae9f4a
Calling 'app_send' eventually calls the app's message handler. It's possible
for a handler to obtain a lock on another object, and then need/want to lock
the app object. If the caller of 'app_send' locks the app object prior to
calling then there's a potential for a deadlock, if another thread calls
'app_send' without locking.
This patch makes it so 'app_send' is not called with the app object locked in
the section of code doing such.
ASTERISK-28423 #close
Change-Id: I6767c6d0933c7db1b984018966eefca4c0638a27
The cleanup code in stasis shuts down applications if they are in a deactivated
state, and no longer have explicit subscriptions. When registering an app the
cleanup code was running before calling 'update'. When it should be executed
after 'update' since a call to register may re-activate the app. We don't want
it to shutdown before the 'update' otherwise the app won't be re-activated,
or registered.
This patch makes it so the cleanup code is executed post 'update'.
ASTERISK-28679 #close
Change-Id: I8f2c0b17e33bb8128441567b97fd4c7bf74a327b
We need to wait for the message sending callback to finish to know if
we succeeded or failed.
ASTERISK-25421 #close
Reported by: Dmitriy Serov
Change-Id: I22b954398821d2caf4c6fe58f0607c8cfa378059
The change in 9b99ef50b5 updated the
syntax of the 'realtime update2' CLI command but did not correctly
update the calls to ast_update2_realtime().
The issue this addresses was originally opened because we aren't
allowing a SQL NULL to be set as part of the update, but this is a
limitation of the Realtime API and is not a bug.
Additionally, this patch:
* Corrects the example in the command documentation to reflect
'update2' instead of 'update.'
* Fixes the leading spacing of the command documentation.
* Checks that the required 'NULL' literal argument is present where we
expect it to be.
ASTERISK-21794 #close
Reported by: Cédric Bassaget
Change-Id: Idda63a5dc50d5f9bcb34c27ea3238d90f733b2cd
This commit adds support for
[AudioSocket](
https://wiki.asterisk.org/wiki/display/AST/AudioSocket),
a very simple bidirectional audio streaming protocol. There are both
channel and application interfaces.
A description of the protocol can be found on the above referenced
GitHub page. A short talk about the reasons and implementation can be
found on [YouTube](https://www.youtube.com/watch?v=tjduXbZZEgI), from
CommCon 2019.
ARI support has also been added via the existing "externalMedia" ARI
functionality. The UUID is specified using the arbitrary "data" field.
ASTERISK-28484 #close
Change-Id: Ie866e6c4fa13178ec76f2a6971ad3590a3a588b5
Some body generators, such as dialog-info+xml, require storing state
information which is then conveyed in the NOTIFY request itself. Up
until now there was no way for such body generators to persist this
information.
Two new API calls have been added to allow body generators to set and
get persisted data. This data is persisted out alongside the normal
persistence information and allows the body generator to restore
state information or to simply use this for normal storage of state.
State is stored in the form of JSON and it is up to the body
generator to interpret this as needed.
The dialog-info+xml body generator has been updated to take advantage
of this to persist the version number.
ASTERISK-27759
Change-Id: I5fda56c624fd13c17b3c48e0319b77079e9e27de
Adds source port matching support when IP matching is used:
[example]
type = identify
match = 1.2.3.4:5060/32, 1.2.3.4:6000/32, asterisk.org:4444
If the IP matches but the source port does not, we reject and search for
alternatives. SRV lookups are still performed if enabled (srv_lookups = yes),
unless the configured FQDN includes a port number in which case just a host
lookup is performed.
ASTERISK-28639 #close
Reported by: Mitch Claborn
Change-Id: I256d5bd5d478b95f526e2f80ace31b690eebba92
ast_sorcery_changeset_create() is not commutative and will fail to detect
differences between two variable lists depending on what changed, so switch to
ast_variable_lists_match().
ASTERISK-28492 #close
Reported by: Jean-Denis Girard
Change-Id: I7b3256983ddfaa2138d3de92a444a53b5193a4e1
When TLS is in use, checking the readiness of the underlying FD is insufficient
for determining if there is data available to be read. So before polling the
FD, check if there is any buffered data in the TLS layer and use that first.
ASTERISK-28562 #close
Reported by: Robert Sutton
Change-Id: I95fcb3e2004700d5cf8e5ee04943f0115b15e10d
This patch adds a new flag "inhibitConnectedLineUpdates" to the 'addChannel'
operation in the Bridges REST API. When set, this flag avoids generating COLP
frames when the specified channels enter the bridge.
ASTERISK-28629
Change-Id: Ib995d4f0c6106279aa448b34b042b68f0f2ca5dc
A previous review, 13174, made a change whereby on an incoming offer SDP
the pending topology was initialized to the configured. This caused a problem
for bundle with WebRTC where bundle could reference a stream that did not
actually exist if the configuration had both audio and video but the
offer SDP only contained audio.
This change undoes that review and instead fixes the original problem it
sought to solve by setting the state of created streams based on the
contents of the offer SDP. This way the stream state is not inactive
until negotiation later completes.
ASTERISK-28659
Change-Id: Ic5ae5a86437d3e686ac5afd91d133cc916198355
A previous patch:
Gerrit Change-Id: I73bb24799bfe1a48adae9c034a2edbae54cc2a39
made it so a T.38 Gateway tries to negotiate with both sides by sending T.38
negotiation request to both endpoints supported T.38 versus the previous
behavior of forwarding negotiation to the "other" channel once a preamble
was detected.
This had the unfortunate side effect of breaking some setups. Specifically
ones that set the max datagram option on an endpoint configuration (configured
max datagram was not propagated since Asterisk now initiates negotiations).
This patch adds a configuration option, "negotiate_both", that when enabled
makes it so Asterisk initiates the negotiation requests to both endpoints vs.
the previous behavior of waiting, and forwarding the request.
The default is disabled keeping with the old behavior.
ASTERISK-28660
Change-Id: I5deb875f3485e20bc75119ec743090655d864a1a
In Asterisk 16+, there are a few places in ast_rtp_read where we've
allocated a frame list but return a null frame instead of the list.
In these cases, any frames left in the list won't be freed. In the
vast majority of the cases, the list is empty when we return so
there's nothing to free but there have been leaks reported in the
wild that can be traced back to frames left in the list before
returning.
The escape paths now all have logic to free frames left in the
list.
ASTERISK-28609
Reported by: Ted G
Change-Id: Ia1d7075857ebd26b47183c44b1aebb0d8f985f7a
RFC3261 Section 10 "Registrations", specifically paragraph
"10.2.4: Refreshing Bindings", states that a user agent compares
each contact address (in a 200 REGISTER response) to see if it
created the contact. If the Asterisk endpoint has the
rewrite_contact option set however, the contact host and port sent
back in the 200 response will be the rewritten one and not the
one sent by the user agent. This prevents the user agent from
matching its own contact. Some user agents get very upset when
this happens and will not consider the registration successful.
While this is rare, it is acceptable behavior especially if more
than 1 user agent is allowed to register to a single endpoint/aor.
This commit updates res_pjsip_nat (where rewrite_contact is
implemented) to store the original incoming Contact header in
a new "x-ast-orig-host" URI parameter before rewriting it, and to
restore the original host and port to the Contact headers in the
outgoing response.
This is only done if the request is a REGISTER and rewrite_contact
is enabled.
pjsip_message_filter was also updated to ensure that if a request
comes in with any existing x-ast-* URI parameters, we remove them
so they don't conflict. Asterisk will never send a request
with those headers in it but someone might just decide to add them
to a request they craft and send to Asterisk.
NOTE: If a device changes its contact address and registers again,
it's a NEW registration. If the device didn't unregister the
original registration then all existing behavior based
on aor/remove_existing and aor/max_contacts apply.
ASTERISK-28502
Reported-by: Ross Beer
Change-Id: Idc263ad2d2d7bd8faa047e5804d96a5fe1cd282e
The simple fix here is simply to NULL out username and password after we call
ast_free on them. Unfortunately, I noticed that we weren't checking for
allocation failures for username and password, and adding those checks made
things noisy and cumbersome.
So instead we partially rollback the recent LGTM patch, and move the alloca
calls into find_aor_name().
ASTERISK-28641 #close
Reported by: Ross Beer
Change-Id: Ic9d01624e717a020be0b0aee31f0814e7f1ffbe2
We're appropriately sizing the id_domain_alias buffer, but then copying the data
into the id_domain one. We were then using the uninitialized id_domain_alias
buffer we just allocated.
This is ASTERISK~28641 adjacent, but significant enough to warrant its own
patch.
Change-Id: I81c38724d18deab8c6573153e2b99dbb6e2f33d9
We need to copy the endpoint name before we call ao2_cleanup() on it,
otherwise we might try to access memory that has been reclaimed.
ASTERISK-28445 #close
Reported by: Bernhard Schmidt
Change-Id: I404b952608aa606e0babd3c4108346721fb726b3
if asterisk offer T38 SDP with none error correction scheme and
the endpoint respond with redundancy EC scheme, asterisk switch
to that mode. Since we configure the endpoint as none EC mode
we should not switch to any other mode except none.
following logic implemented in code.
1. If asterisk offer none, and anything except none in answer
will be ignored.
2. If asterisk offer fec, answer with fec, redundancy and none will
be accepted.
3. If asterisk offer redundancy, answer with redundancy and none
will be accepted.
ASTERISK-28621
Change-Id: I343c62253ea4c8b7ee17abbfb377a4d484a14b19
Fixes: error: ‘domain_name’ may be used uninitialized in this function
Found with gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008
Change-Id: I44413b49ea1205aa25538142161deb73883c79e8
OpenSSL can not tolerate if the packet sent out does not
match the length that it provided to the sender. This change
lies and says that each time the full packet was sent. If
a problem does occur then a retransmission will occur as
appropriate.
ASTERISK-28576
Change-Id: Id42455b15c9dc4eb987c8c023ece6fbf3c22a449
This patch fixes several issues reported by the lgtm code analysis tool:
https://lgtm.com/projects/g/asterisk/asterisk
Not all reported issues were addressed in this patch. This patch mostly fixes
confirmed reported errors, potential problematic code points, and a few other
"low hanging" warnings or recommendations found in core supported modules.
These include, but are not limited to the following:
* innapropriate stack allocation in loops
* buffer overflows
* variable declaration "hiding" another variable declaration
* comparisons results that are always the same
* ambiguously signed bit-field members
* missing header guards
Change-Id: Id4a881686605d26c94ab5409bc70fcc21efacc25
resource_events:stasis_app_message_handler() was locking the session,
then attempting to determine if the app had debug enabled which
locked the app_registry container. res_stasis:__stasis_app_register
was locking the app_registry container then calling app_update
which caused app_handler (which locks the session) to run.
The result was a deadlock.
* Updated resource_events:stasis_app_message_handler() to determine
if debug was set (which locks the app_registry) before obtaining the
session lock.
* Updated res_stasis:__stasis_app_register to release the app_registry
container lock before calling app_update (which locks the sesison).
ASTERISK-28423
Reported by Ross Beer
Change-Id: I58c69d08cb372852a63933608e4d6c3e456247b4
There exists a scenario where a thread can hold a lock on the
channels container while trying to lock a bridge. At the same
time another thread can hold the lock for said bridge while
attempting to retrieve a channel. This causes a deadlock.
This change fixes this scenario by retrieving a channel snapshot
instead of a channel, as information present in the snapshot
is all that is needed.
ASTERISK-28616
Change-Id: I68ceb1d62c7378addcd286e21be08a660a7cecf2
Found during some testing, there is a race condition between selecting an
appropriate bridge type for a call versus the applying of media on the callee's
session. In some instances a native bridge type would have been chosen, but
due to the callee's media not yet being established at bridge compatibility
check time the simple bridge type is picked instead.
When using chan_pjsip this initiates a topology change event. The topologies
are then compared for the two sessions. However, when the topology was created
for the caller its streams are initialized to "inactive". This topology is then
used as a base when creating the callee's topology, and streams. Soon after
the caller's topology's stream(s) get updated based on the sdp (get set to
sendrecv in the failing scenario).
Now when the topology change event is raised, and the two topologies are
compared, the comparison fails due to a stream state mismatch (sendrecv vs
inactive). And since they differ a reinvite is sent out (to the caller in
this case).
This patch makes it such that when the caller's topology is initially created
it gets created based on its configured endpoint's media topology. When the
endpoint's topology is created its stream's state(s) are initialized to
sendrecv instead of inactive. Subsequently, now when the callee's topology is
created its topology streams are now initialized to sendrecv. Thus when the
topology change event occurs due to the mentioned scenario the stream states
match for the given sessions, and the reinvite is not sent unless due to some
other valid mismatch.
Note, this patch only changes one pending media state's creation point. It's
possible other places *could* be changed, however for now it was deemed best
to only alter what's here.
Change-Id: I6ba3a6a75f64824a1b963044c37acbe951c389c7
If the "max_retries" option is set to 0 then upon failure no
further attemps are made, so explicitly document the behavior.
ASTERISK-28602
Change-Id: I1e30daae9dd6c49ce18744164214d3def505acbf
Calling ne_uri_parse allocates memory that needs to be freed with a
corresponding call to ne_uri_free.
ASTERISK-28572 #close
Change-Id: I8a6834da27000a6807d89cb7a157b2a88fcb5e61
This change ensures that the module isn't unloaded when a
WebSocket is open. Previously it was possible to unload the
module manually or during shutdown which could cause a crash
when any active WebSockets were terminated.
ASTERISK-28585
Change-Id: I85c71ab112f99875b586419a34c08c8b34c14c5c
When we created the External Media addition to ARI we created an
ExternalMedia object to be returned from the channels/externalMedia
REST endpoint. This object contained the channel object that was
created plus local_address and local_port attributes (which are
also in the Channel variables). At the time, we thought that
creating an ExternalMedia object would give us more flexibility
in the future but as we created the sample speech to text
application, we discovered that it doesn't work so well with ARI
client libraries that a) don't have the ExternalMedia object
defined and/or b) can't promote the embedded channel structure
to a first-class Channel object.
This change causes the channels/externalMedia REST endpoint to
return a Channel object (like channels/create and channels/originate)
instead of the ExternalMedia object.
Change-Id: If280094debd35102cf21e0a31a5e0846fec14af9
PostgreSQL 12 finally removed column adsrc from table pg_catalog.pg_attrdef
(column default values), which has been deprecated since version 8.0.
Since then, the official/correct/supported way to retrieve the column
default value from the catalog is function pg_catalog.pg_get_expr().
This change breaks compatibility with pre-8.0 PostgreSQL servers,
but has reached end-of-support more than a decade ago.
cdr_pgsql and res_config_pgsql still have support for pre-7.3
servers, but cleaning that up is perhaps a topic for a major release,
not this bugfix.
ASTERISK-28571
Change-Id: I834cb3addf1937e19e87ede140bdd16cea531ebe
When creating an unsolicited MWI aggregate subscription it was possible for
the subscription object to be double unref'ed. This patch removes the explicit
unref as it is not needed since the RAII_VAR will handle it at function end.
Less concerning there was also a bug that could potentially allow the aggregate
subscription object to be added to the unsolicited container twice. This patch
ensures it is added only once.
ASTERISK-28575
Change-Id: I9ccfdb5ea788bc0c3618db183aae235e53c12763
On shutdown it's possible for the unsolicited mwi container to be freed before
other dependent threads are done using it. This patch ensures this can no
longer happen by wrapping the container in an ao2_global object. The solicited
container was also changed too.
ASTERISK-28552
Change-Id: I8f812286dc19a34916acacd71ce2ec26e1042047
Both res_pjsip and res_pjsip_mwi made use of serializer pools. However, they
both implemented their own serializer pool functionality that was pretty much
identical in each of the source files. This patch removes the duplicated code,
and uses the new 'ast_serializer_pool' object instead.
Additionally res_pjsip_mwi enables a shutdown group on the pool since if the
timing was right the module could be unloaded while taskprocessor threads still
needed to execute, thus causing a crash.
Change-Id: I959b0805ad024585bbb6276593118be34fbf6e1d
Add a new dialplan function PJSIP_MOH_PASSTHROUGH that allows
the on-hold behavior to be controlled on a per-call basis
ASTERISK-28542 #close
Change-Id: Iebe905b2ad6dbaa87ab330267147180b05a3c3a8
There are some warning messages which are not informative without endpoint:
"No registered subscribe handler for event presence.winfo"
"No registered publish handler for event presence"
This patch adds an endpoint name to these messages.
Change-Id: Ia2811ec226d8a12659b4f9d4d224b48289650827
Allow the list of files to be played to be provided explicitly in the
music class's configuration. The primary driver for this change is to
allow URLs to be used for MoH.
Change-Id: I9f43b80b43880980b18b2bee26ec09429d0b92fa
If a permanent contact URI associated with an AOR is invalid, we add a
Contact header to REGISTER responses with a NULL URI, causing a crash.
ASTERISK-28463 #close
Change-Id: Id2b643e58b975bc560aab1c111e6669d54db9102
The following message:
"Subscription request from endpoint <blah> rejected. Expiration of 0 is invalid"
Would sometimes spam the log with warnings if Asterisk restarted and a bunch
of clients sent unsubscribes. This patch changes it from a warning to a debug
message.
Change-Id: I841ec42f65559f3135e037df0e55f89b6447a467
When a stale item was being updated the object was being retrieved, but its
reference was not being decremented after the update. This patch makes it so
the object is now appropriately de-referenced.
ASTERISK-28523
Change-Id: I9d8173d3a0416a242f4eba92fa0853279c500ec7
This change adds support to the JITTERBUFFER dialplan function
for audio and video synchronization. When enabled the RTCP SR
report is used to produce an NTP timestamp for both the audio and
video streams. Using this information the video frames are queued
until their NTP timestamp is equal to or behind the NTP timestamp
of the audio. The audio jitterbuffer acts as the leader deciding
when to shrink/grow the jitterbuffer when adaptive is in use. For
both adaptive and fixed the video buffer follows the size of the
audio jitterbuffer.
ASTERISK-28533
Change-Id: I3fd75160426465e6d46bb2e198c07b9d314a4492
According to RFC3550, ALL RTCP packets must be sent in a compond packet
of at least two individual packets, including SR/RR and SDES. REMB,
FIR, and NACK were not following this format, and as a result, would
fail the packet check in ast_rtcp_interpret. This was found from writing
unit tests for RTCP. The browser would accept the way we were
constructing these RTCP packets, but when sending directly from one
Asterisk instance to another, the above mentioned problem would occur.
Change-Id: Ieb140e9c22568a251a564cd953dd22cd33244605
When modifying an already defined variable in some channel drivers they
add a new variable with the same name to the list, but that value is
never used, only the first one found.
Introduce ast_variable_list_replace() and use it where appropriate.
ASTERISK-23756 #close
Patches:
setvar-multiplie.patch submitted by Michael Goryainov
Change-Id: Ie1897a96c82b8945e752733612ee963686f32839
This fix allows a realtime moh class to be unregistered from the command
line. This is useful when the contents of a directory referenced by a
realtime moh class have changed.
The realtime moh class is then reloaded on the next request and uses the
new directory contents.
ASTERISK-17808
Change-Id: Ibc4c6834592257c4bb90601ee299682d15befbce
Added unit tests for RTCP video stats. These tests include NACK, REMB,
FIR/FUR/PLI, SR/RR/SDES, and packet loss statistics. The REMB and FIR
tests are currently disabled due to a bug. We expect to receive a
compound packet, but the code sends this out as a single packet, which
the browser accepts, but makes Asterisk upset.
While writing these tests, I noticed an issue with NACK as well. Where
it is handling a received NACK request, it was reading in only the first
8 bits of following packets that were also lost. This has been changed
to the correct value of 16 bits.
Also made a minor fix to the data buffer unit test.
Change-Id: I56107c7411003a247589bbb6086d25c54719901b
The Channel resource has a new sub-resource "externalMedia".
This allows an application to create a channel for the sole purpose
of exchanging media with an external server. Once created, this
channel could be placed into a bridge with existing channels to
allow the external server to inject audio into the bridge or
receive audio from the bridge.
See https://wiki.asterisk.org/wiki/display/AST/External+Media+and+ARI
for more information.
Change-Id: I9618899198880b4c650354581b50c0401b58bc46
After receiving a 200 OK with a declined stream in response to a T.38
initiated re-invite Asterisk would crash when attempting to dereference
a NULL session media object.
This patch checks to make sure the session media object is not NULL before
attempting to use it.
ASTERISK-28495
patches:
ast-2019-004.patch submitted by Alexei Gradinari (license 5691)
Change-Id: I168f45f4da29cfe739acf87e597baa2aae7aa572
res_pjsip_mwi allows both solicited and unsolicited MWI subscription types.
While both can be set in the configuration for a given endpoint/aor, only
one is allowed. Precedence is given to unsolicited. Meaning if an endpoint/aor
is configured to allow both types then the solicited subscription is rejected
when it comes in. However, there is a configuration option to override that
behavior:
mwi_subscribe_replaces_unsolicited
When set to "yes" then when a solicited subscription comes in instead of
rejecting it Asterisk is suppose to replace the unsolicited one if it exists.
Prior to this patch there was a bug in Asterisk that allowed the solicted one
to be added, but did not remove the unsolicited. As a matter of fact a new
unsolicited subscription got added everytime a SIP register was received.
Over time this eventually could "flood" a phone with SIP notifies.
This patch fixes that behavior to now make it work as expected. If configured
to do so a solicited subscription now properly replaces the unsolicited one.
As well when an unsubscribe is received the unsolicited subscription is
restored. Logic was also put in to handle reloads, and any configuration changes
that might result from that. For instance, if a solicited subscription had
previously replaced an unsolicited one, but after reload it was configured to
not allow that then the solicited one needs to be shutdown, and the unsolicited
one added.
ASTERISK-28488
Change-Id: Iec2ec12d9431097e97ed5f37119963aee41af7b1
Given the following request path and 2 handler paths...
Request: /channels/externalMedia
Handler: /channels/{channelId} "wildcard"
Handler: /channels/externalmedia "non-wildcard"
...if /channels/externalMedia was registered as a handler after
/channels/{channelId} as shown above, the request would automatically
match the wildcard handler and attempt to parse "externalMedia" into
the channelId variable which isn't what was intended. It'd work
if the non-wildard entry was defined in rest-api/api-docs/channels.json
before the wildcard entry but that makes the json files
order-dependent which isn't a good thing.
To combat this issue, the search loop saves any wildcard match but
continues looking for exact matches at the same level. If it finds
one, it's used. If it hasn't found an exact match at the end of
the current level, the wildcard is used. Regardless, after
searching the current level, the wildcard is cleared so it won't
accidentally match for a different object or a higher level.
BTW, it's currently not possible for more than 1 wildcard entry
to be defined for a level. For instance, there couldn't be:
Handler: /channels/{channelId}
Handler: /channels/{channelName}
We wouldn't know which one to match.
Change-Id: I574aa3cbe4249c92c30f74b9b40e750e9002f925
In chan_sip, there was variable SIPFROMDOMAIN that allows to set
From header URI domain per channel. This patch introduces res_pjsip
variable SIPFROMDOMAIN for backward compatibility with chan_sip.
ASTERISK-28489
Change-Id: I715133e43172ce2a1e82093538dc39f9e99e5f2e
Somehow it's possible for the srtp session object to be NULL even though the
Asterisk srtp object itself is valid. When this happened it would cause a
crash down in the srtp code when attempting to protect or unprotect data.
After looking at the code there is at least one spot that makes this situation
possible. If Asterisk fails to unprotect the data, and after several retries
it still can't then the srtp->session gets freed, and set to NULL while still
leaving the Asterisk srtp object around. However, according to the original
issue reporter this does not appear to be their situation since they found
no errors logged stating the above happened (which Asterisk does for that
situation).
An issue was found however, where a possible race condition could occur between
the pjsip incoming negotiation, and the receiving of RTP packets. Both places
could attempt to create/setup srtp for the same rtp instance at the same time.
This potentially could be the cause of the problem as well.
Given the above this patch adds locking around srtp setup for a given rtp, or
rtcp instance. NULL checks for the session have also been added within the
protect and unprotect functions as a precaution. These checks should at least
stop Asterisk from crashing if it gets in this situation again.
This patch also fixes one other issue noticed during investigation. When doing
a replace the old object was freed before creating the replacement. If the new
replacement object failed to create then the rtp/rtcp instance would now point
to freed srtp data which could potentially cause a crash as well when the next
attempt to reference it was made. This is now fixed so the old srtp object is
kept upon replacement failure.
Lastly, more logging has been added to help diagnose future issues.
ASTERISK-28472
Change-Id: I240e11cbb1e9ea8083d59d50db069891228fe5cc
The code for gathering contacts could result in the same contact
being retrieved and added to the list multiple times. The container
which stores the contacts to display will now only allow a contact
to be added to it once instead of multiple times.
ASTERISK-28228
Change-Id: I805185cfcec03340f57d2b9e6cc43c49401812df
We now check that a body exists and it has a length > 0 before
attempting to process it.
ASTERISK-28447
Reported-by: Gil Richard
Change-Id: Ic469544b22ab848734636588d4c93426cc6f4b1f
The MWI core recently got some new API calls that make tracking MWI state
lifetime more reliable. This patch updates those modules that subscribe to
specific MWI topics to use the new API. Specifically, these modules now
subscribe to both MWI topics and MWI state.
ASTERISK-28442
Change-Id: I32bef880b647246823dbccdf44a98d384fcabfbd
Currently, DELETE /ari/channels/<channelID> supports only few hangup reasons.
It's good enough for simple use, but when it needs to set the detail reason,
it comes challenges.
Added reason_code query parameter for that.
ASTERISK-28385
Change-Id: I1cf1d991ffd759d0591b347445a55f416ddc3ff2
According T.38 Gateway 'Use case 3'
https://wiki.asterisk.org/wiki/display/AST/T.38+Gateway
T.38 Gateway should send T.38 negotiation request to called endpoint
if FAX preamble (using V.21 detector) generated by called endpoint.
But it does not, because fax_gateway_detect_v21 constructs T.38
negotiation request, but forwards it only to other channel,
not to the channel on which FAX preamble is detected.
Some SIP endpoints could be improperly configured to rely on the other side
to initiate T.38 re-INVITEs.
With this patch the T.38 Gateway tries to negotiate with both sides
by sending T.38 negotiation request to both endpoints supported T.38.
Change-Id: I73bb24799bfe1a48adae9c034a2edbae54cc2a39
This change adds support for larger TLS certificates by allowing
OpenSSL to fragment the DTLS packets according to the configured
MTU. By default this is set to 1200.
This is accomplished by implementing our own BIO method that
supports MTU querying. The configured MTU is returned to OpenSSL
which fragments the packet accordingly. When a packet is to be
sent it is done directly out the RTP instance.
ASTERISK-28018
Change-Id: If2d5032019a28ffd48f43e9e93ed71dbdbf39c06
The change #10017 "Handle fax gateway being started more than once"
introdiced a bug which leads to segfault in res_fax_spandsp.
The res_fax_spandsp module does not support reserving sessions, so
fax_session_reserve returns a fax session with state AST_FAX_STATE_INACTIVE.
The fax_gateway_start does not create a real fax session if the fax session
is already present and the state is not AST_FAX_STATE_RESERVED.
But the "reserved" session created for res_fax_spandsp has state
AST_FAX_STATE_INACTIVE, so fax_gateway_start not starting.
Then when fax_gateway_framehook is called and gateway T.38 state is
NEGOTIATED the call of gateway->s->tech->write(gateway->s, f) leads to
segfault, because session tech_pvt is not set, i.e. the tech session
was not initialized/started.
This patch adds check also on AST_FAX_STATE_INACTIVE to the "reserved"
session created for res_fax_spandsp will start.
This patch also adds extra check and log ERROR if tech_pvt is not set
before call tech->write.
ASTERISK-27981 #close
Change-Id: Ife3e65e5f18c902db2ff0538fccf7d28f88fa803
This patch adds a channel name to output of CLI 'fax show session'
and also expands the channel name field up to 30 characters on
CLI 'fax show sessions'
Change-Id: Id059c43ff41811f5e76712b83fb63b8f246da953
When monitoring Asterisk instances, it's often useful to know when an
outbound registration fails, as this often maps to the notion of a trunk
and having a trunk fail is usually a "bad thing". As such, this patch
adds monitoring metrics that track the state of PJSIP outbound registrations.
It does this by looking for the Registry events coming across the Stasis
system topic, and publishing those as metrics to Prometheus. Note that
while this may support other outbound registration types (IAX2, SIP, etc.)
those haven't been tested. Your mileage may vary.
(And why are you still using IAX2 and SIP? It's 2019 folks. Get with the
program.)
This patch also adds Sorcery observers to handle modifications to the
underlying PJSIP outbound registration objects. This is useful when a
reload is triggered that modifies the properties of an outbound registration,
or when ARI push configuration is used and an object is updated or
deleted. Because we rely on properties of the registration object to
define the metric (label key/value pairs), we delete the relevant metric when
we notice that something has changed and wait for a new Stasis message to
arrive to re-create the metric.
ASTERISK-28403
Change-Id: If01420e38530fc20b6dd4aa15cd281d94cd2b87e
This patch adds a few CLI commands to the res_prometheus module to aid
system administrators setting up and configuring the module. This includes:
* prometheus show status: Display basic statistics about the Prometheus
module, including its essential configuration, when it was last scraped,
and how long the scrape took. The last two bits of information are useful
when Prometheus isn't generating metrics appropriately, as it will at
least tell you if Asterisk has had its HTTP route hit by the remote
server.
* prometheus show metrics: Dump the current metrics to the CLI. Useful for
system administrators to see what metrics are currently available without
having to cURL or go to Prometheus itself.
ASTERISK-28403
Change-Id: Ic09813e5e14b901571c5c96ebeae2a02566c5172
This patch adds basic Asterisk bridge statistics to the res_prometheus
module. This includes:
* asterisk_bridges_count: The current number of bridges active on the
system.
* asterisk_bridges_channels_count: The number of channels active in a
bridge.
In all cases, enough information is provided with each bridge metric
to determine a unique instance of Asterisk that provided the data, along
with the technology, subclass, and creator of the bridge.
ASTERISK-28403
Change-Id: Ie27417dd72c5bc7624eb2a7a6a8829d7551788dc
This patch adds basic Asterisk endpoint statistics to the res_prometheus
module. This includes:
* asterisk_endpoints_state: The current state (unknown, online, offline)
for each defined endpoint.
* asterisk_endpoints_channels_count: The current number of channels
associated with a given endpoint.
* asterisk_endpoints_count: The current number of defined endpoints.
In all cases, enough information is provided with each endpoint metric
to determine a unique instance of Asterisk that provided the data, as well
as the underlying technology and resource definition.
ASTERISK-28403
Change-Id: I46443963330c206a7d12722d08dcaabef672310e
Using timestamp with signed int will cause timestamps exceeding max value
to be negative.
This causes the jitterbuffer to do passthrough of the packet.
ASTERISK-28421
Change-Id: I9dabd0718180f2978856c50f43aac4e52dc3cde9
This patch adds basic Asterisk channel statistics to the res_prometheus
module. This includes:
* asterisk_calls_sum: A running sum of the total number of
processed calls
* asterisk_calls_count: The current number of calls
* asterisk_channels_count: The current number of channels
* asterisk_channels_state: The state of any particular channel
* asterisk_channels_duration_seconds: How long a channel has existed,
in seconds
In all cases, enough information is provided with each channel metric
to determine a unique instance of Asterisk that provided the data, as
well as the name, type, unique ID, and - if present - linked ID of each
channel.
ASTERISK-28403
Change-Id: I0db306ec94205d4f58d1e7fbabfe04b185869f59
Prometheus is the defacto monitoring tool for containerized applications.
This patch adds native support to Asterisk for serving up Prometheus
compatible metrics, such that a Prometheus server can scrape an Asterisk
instance in the same fashion as it does other HTTP services.
The core module in this patch provides an API that future work can build
on top of. The API manages metrics in one of two ways:
(1) Registered metrics. In this particular case, the API assumes that
the metric (either allocated on the stack or on the heap) will have
its value updated by the module registering it at will, and not
just when Prometheus scrapes Asterisk. When a scrape does occur,
the metrics are locked so that the current value can be retrieved.
(2) Scrape callbacks. In this case, the API allows consumers to be
called via a callback function when a Prometheus initiated scrape
occurs. The consumers of the API are responsible for populating
the response to Prometheus themselves, typically using stack
allocated metrics that are then formatted properly into strings
via this module's convenience functions.
These two mechanisms balance the different ways in which information is
generated within Asterisk: some information is generated in a fashion
that makes it appropriate to update the relevant metrics immediately;
some information is better to defer until a Prometheus server asks for
it.
Note that some care has been taken in how metrics are defined to
minimize the impact on performance. Prometheus's metric definition
and its support for nesting metrics based on labels - which are
effectively key/value pairs - can make storage and managing of metrics
somewhat tricky. While a naive approach, where we allow for any number
of labels and perform a lot of heap allocations to manage the information,
would absolutely have worked, this patch instead opts to try to place
as much information in length limited arrays, stack allocations, and
vectors to minimize the performance impacts of scrapes. The author of
this patch has worked on enough systems that were driven to their knees
by poor monitoring implementations to be a bit cautious.
Additionally, this patch only adds support for gauges and counters.
Additional work to add summaries, histograms, and other Prometheus
metric types may add value in the future. This would be of particular
interest if someone wanted to track SIP response types.
Finally, this patch includes unit tests for the core APIs.
ASTERISK-28403
Change-Id: I891433a272c92fd11c705a2c36d65479a415ec42
You can now add the "include_local_address" flag to an entry in
rtp.conf "[ice_host_candidates]" to include both the advertized
address and the local address in ICE negotiation:
[ice_host_candidates]
192.168.1.1 = 1.2.3.4,include_local_address
This causes both 192.168.1.1 and 1.2.3.4 to be advertized.
Change-Id: Ide492cd45ce84546175ca7d557de80d9770513db
This change fixes two bugs which both resulted in the packet loss
count exceeding 65,000.
The first issue is that the sequence number check to determine if
cycling had occurred was using the wrong variable resulting in the
check never seeing that cycling has occurred, throwing off the
packet loss calculation. It now uses the correct variable.
The second issue is that the packet loss calculation assumed that
the received number of packets in an interval could never exceed
the expected number. In practice this isn't true due to delayed
or retransmitted packets. The expected will now be updated to
the received number if the received exceeds it.
ASTERISK-28379
Change-Id: If888ebc194ab69ac3194113a808c414b014ce0f6
When multiple endpoints try to register close together using the same
AOR with qualify_frequency set, one contact would qualify immediately
while the other contacts would have to wait out the duration of the
timer before being able to qualify. Changing the conditional to check
the contact container count for a non-zero value allows all contacts to
qualify immediately.
Change-Id: I79478118ee7e0d6e76af7c354d66684220db9415
When we use early bridge with create and dial from stasis using Local channel
and the dialplan does not any entry the it is returned from core_local.c with
No such extension .
In such case asterisk locks up till the channel is not hangup with the error
Exceptionally long voice queue length
* Found that in such case app_control_dial fails on ast_call method and
return -1
* Since it is called from stasis_app_send_command_async and return -1 does
not cause resources to be freed and since no PBX exist it is not able to
read from channel causing exceptionally long queue
* After putting this code found that the channel was releasing immediately
and resources were freed.
ASTERISK-28399
Reported by: Abhay Gupta
Tested by: Abhay Gupta
Change-Id: I0a55c923fc6995559f808d63b9488762b4489318
Updated ast_sip_create_rdata_with_contact and registrar_find_contact
to check the return from pjsip_parse_uri before attempting to
use the uri returned.
ASTERISK-28402
Reported-by: Ross Beer
Change-Id: I9810b3b163c45ed5a56ec743586e5ce107f13ba7
The dial bridge is meant to hold channels which have been created
and dialed in stasis. It handles the frames coming from them and raises
the appropriate events.
It was possible for the code to mistakenly place calls which came
from the dialplan into the dial bridge if they were not in an
answered state. These channels are not outgoing channels and
should not be placed into the dial bridge.
The code now checks to ensure that only stasis created channels are
placed into the dial bridge by checking that a PBX does not exist
on the channel.
ASTERISK-27756
Change-Id: Ideee69ff06c9a0b31f7ed61165f5c055f51d21b6
The transport-cc draft is a mechanism by which additional information
about packet reception can be provided to the sender of packets so
they can do sender side bandwidth estimation. This is accomplished
by having a transport specific sequence number and an RTCP feedback
message. This change implements this in the receiver direction.
For each received RTP packet where transport-cc is negotiated we store
the time at which the RTP packet was received and its sequence number.
At a 1 second interval we go through all packets in that period of time
and use the stored time of each in comparison to its preceding packet to
calculate its delta. This delta information is placed in the RTCP
feedback message, along with indicators for any packets which were not
received.
The browser then uses this information to better estimate available
bandwidth and adjust accordingly. This may result in it lowering the
available send bandwidth or adjusting how "bursty" it can be.
ASTERISK-28400
Change-Id: I654a2cff5bd5554ab94457a14f70adb71f574afc
There is enough MWI functionality to warrant it having its own 'c' and header
files. This patch moves all current core MWI data structures, and functions
into the following files:
main/mwi.h
main/mwi.c
Note, code was simply moved, and not modified. However, this patch is also in
preparation for core MWI changes, and additions to come.
Change-Id: I9dde8bfae1e7ec254fa63166e090f77e4d3097e0
Added a new PJSIP global setting called norefersub.
Default is true to keep support working as before.
res_pjsip_refer: Configures PJSIP norefersub capability accordingly.
Checks the PJSIP global setting value.
If it is true (default) it adds the norefersub capability to PJSIP.
If it is false (disabled) it does not add the norefersub capability
to PJSIP.
This is useful for Cisco switches that do not follow RFC4488.
ASTERISK-28375 #close
Reported-by: Dan Cropp
Change-Id: I0b1c28ebc905d881f4a16e752715487a688b30e9
An earlier contributor apparently forgot to run 'make ari-stubs'
before committing after making ARI model changes.
Change-Id: I7813e5638e2821d11f4b968dc2aeab4f725190a6
Reset the internal counter that the AEL2 compiler uses for unique label
names before compiling. This keeps dialplan labels consistent across
reloads assuming the AEL2 has not changed.
ASTERISK-17799 #close
Reported by: Kirill Katsnelson
Change-Id: I30b3cc887d1ee0644d3f341e2fef16f525d7fae5
In AEL2, if a 'for' statement contains macro* calls, like:
for (&iterator(${TRY},A); "${A}" != ""; &iterate(A)) {
The AEL2 parser will translate these into calls to the deprecated Macro
dialplan application and use the antiquated pipe delimiter.
Instead, convert these into calls to the Gosub dialplan application and
use commas as argument separators.
ASTERISK-18593 #close
Reported by: Luke-Jr
* 'macro' in this context means AEL2 macros, not the 'Macro' application
Change-Id: I3d73716033b8e3e42e0209d355bf5f10c97045fc
When generating the regular expression that matches against existing
extensions, we need to escape literal characters that can also be
regular expression metacharacters. This was already being done for '*'
but we need to do the same for '+'.
In passing, remove some unreachable code - strcmp() is already run
immediately when entering extension_matches().
ASTERISK-14939 #close
Reported by: klaus3000
Change-Id: I8d2cccb3479168fba1b0a6704c52198b396468f1
REMB's exponent is 6-bits (0..63) and has a mantissa of 18-bits. We were using
an unsigned integer to represent the bitrate. However, that type is not large
enough to hold all potential bitrate values. If the bitrate is large enough
bits were being shifted off the "front" of the mantissa, which caused the
wrong value to be sent to the browser.
This patch makes it so it now uses a float type to hold the bitrate. Using a
float allows for all bitrate values to be correctly represented.
ASTERISK-28255
Change-Id: Ice00fdd16693b16b41230664be5d9f0e465b239e
It looks like we're not properly calculating jitter values on received
video streams. This patch enables the code that does jitter calculations
for those streams.
Change-Id: Iaac985808829c8f034db8c57318789c4c8c11392
It was difficult to check the channel's current application and
parameters using ARI for current channels. Added app_name, app_data
items to show the current application information.
ASTERISK-28343
Change-Id: Ia48972b3850e5099deab0faeaaf51223a1f2f38c
If Realtime @ variable value is NULL or empty or contains only whitespaces
then when we try to retrieve it using PJSIP_ENDPOINT we get WARNING
pjsip_endpoint_function_read: Unknown property @my_var for PJSIP endpoint.
And the variable is missing in the result of CLI pjsip show endpoint.
This patch keeps empty sorcery extended field.
ASTERISK-28341 #close
Change-Id: I221fccc04cbfa2be17ce971f64ae0e74e465eea0
Because StasisEnd's timestamp created it's own timestamp, it makes
wrong timestamp, compare to other channel event(ChannelDestroyed).
Fixed to getting a timestamp from the Channel's timestamp.
ASTERISK-28333
Change-Id: I5eb8380fc472f1100535a6bc4983c64767026116
As part of an earlier voicemail refactor, ast_delete_mwi_state_full
was modified to remove the pool topic for a mailbox when the state
was deleted. This was an attempt to prevent stale topics from
accumulating when app_voicemail was reloaded and a mailbox went
away. Unfortunately because of the fact that when app_voicemail
reloads, ALL mailboxes are deleted then only current ones recreated,
topics were being removed from the pool that still had subscribers
on them, then recreated as new topics of the same name. So now
modules like res_pjsip_mwi are listening on a topic that will
never receive any messages because app_voicemail is publishing on
a different topic that happens to have the same name. The solutiuon
to this is not easy and given that accumulating topics for
deleted mailboxes is less evil that not sending NOTIFYs...
* Removed the call to stasis_topic_pool_delete_topic in
ast_delete_mwi_state_full.
Also:
* Fixed a topic reference leak in res_pjsip_mwi
mwi_stasis_subscription_alloc.
* Added some debugging to mwi_stasis_subscription_alloc,
stasis_topic_create, and topic_dtor.
* Fixed a topic reference leak in an error path in
internal_stasis_subscribe.
ASTERISK-28306
Reported-by: Jared Hull
Change-Id: Id7da0990b3ac4be4b58491536b35f41291247b27
Added ARI resource for channel statistics.
GET /ari/channels/{channelId}/rtp_statistics : It returns given
channel's rtp statistics detail.
ASTERISK-28320
Change-Id: I4343eec070438cec13f2a4f22e7fd9e574381376
Changed to requirement to having timestamp for all of ARI events.
The below ARI events were changed to having timestamp.
PlaybackStarted, PlaybackContinuing, PlaybackFinished,
RecordingStarted, RecordingFinished, RecordingFailed,
ApplicationReplaced, ApplicationMoveFailed
ASTERISK-28326
Change-Id: I382c2fef58f5fe107e1074869a6d05310accb41f
Topic names now follow: <subsystem>:<functionality>[/<object>]
This ensures that they are all unique, and also provides better
insight in to what each topic is for.
Subscriber ids now also use the main topic name they are
subscribed to and an incrementing integer as their identifier to
make it easier to understand what the subscription is primarily
responsible for.
Both the CLI commands for listing topic and subscription statistics
now sort to make it a bit easier to see what is going on.
Subscriptions will now show all topics that they are receiving messages
from, not just the main topic they were subscribed to.
ASTERISK-28335
Change-Id: I484e971a38c3640f2bd156282e532eed84bf220d
Currently, when the Asterisk calculates rtp statistics, it uses
sample_count as a unsigned integer parameter. This would be fine
for most of cases, but in case of large enough number of sample_count,
this might be causing the divide by zero error.
ASTERISK-28321
Change-Id: If7e0629abaceddd2166eb012456c53033ea26249
chan_sip will always ignore 183 responses that do not contain SDP
however, chan_pjsip will currently always translate it into a
183 with SDP. This new flag allows chan_pjsip to have the same
behavior as chan_sip.
ASTERISK-28322 #close
Change-Id: If81cfaa17c11b6ac703e3d71696f259d86c6be4a
strtok() uses a static buffer, making it not thread safe.
Also add a #define to cause a compile failure if strtok is used.
Change-Id: Icce265153e1e65adafa8849334438ab6d190e541
Added the ability to move between Stasis applications within Stasis.
This can be done by calling 'move' in an application, providing (at
minimum) the channel's id and the application to switch to. If the
application is not registered or active, nothing will happen and the
channel will remain in the current application, and an event will be
triggered to let the application know that the move failed. The event
name is "ApplicationMoveFailed", and provides the "destination" that the
channel was attempting to move to, as well as the usual channel
information. Optionally, a list of arguments can be passed to the
function call for the receiving application. A full example of a 'move'
call would look like this:
client.channels.move(channelId, app, appArgs)
The control object used to control the channel in Stasis can now switch
which application it belongs to, rather than belonging to one Stasis
application for its lifetime. This allows us to use the same control
object instead of having to tear down the current one and create
another.
ASTERISK-28267 #close
Change-Id: I43d12b10045a98a8d42541889b85695be26f288a
This small feature will help to checking the bridge's status to
figure out which bridge is in old/zombie or not. Also added
detail items for the 'bridge show *' cli to provide more detail
info. And added creation item to the ARI as well.
ASTERISK-28279
Change-Id: I460238c488eca4d216b9176576211cb03286e040
PJSIP assumes that these header names are not allocated, and does not
clone the name strings when reusing headers.
Block unload of res_pjsip_diversion until shutdown to ensure static
memory stays valid.
ASTERISK-28312 #close
Change-Id: Ibd6ea55ec4a604bbd43ac07f8d0b54da2c39b8b9
Rather than calling ast_odbc_find_table() in the prepare callback, call
it beforehand and pass it in to the callback to avoid the need for a
second connection.
ASTERISK-28166 #close
Change-Id: I6f8a0b9990d636fd6bc1a92ed70f7050d2436202
apply_negotiated_sdp_stream was returning a "1" when no joint
capabilities were found on an outgoing call instead of a "-1".
This indicated to res_pjsip_session that the handler DID handle
the sdp when in fact it didn't. Without the appropriate setup,
a subsequent media frame coming in would have an invalid stream_num
and cause a seg fault when the stream was attempted to be retrieved.
apply_negotiated_sdp_stream now returns the correct "-1" and any
media is now discarded before it reaches the core stream processing.
ASTERISK-28260
Reported by: Sotiris Ganouris
Change-Id: Ia095cb16b4862f2f6ad6d2d2a77453fa2542371f
This reverts commit d524ad523d.
Reason for revert: This causes Contact and Via headers to have the wrong
transport address.
ASTERISK-28309 #close
Change-Id: Ibba4d6176f68e39279fcd9a545f81d56e747bed8
If both send_registrations and send_auth are both set to yes,
outbound_auth/username must be set or we crash.
ASTERISK-27992 #close
Change-Id: I6418d56de1ae53f80393b314c2584048fbf7f11d
When a contact was removed by the registrar it did not always check to see if
the circumstances involved a monitored reliable transport. For instance, if the
'remove_existing' option was set to 'true' then when existing contacts were
removed due to 'max_contacts' being reached, those existing contacts being
removed did not unregister the transport monitor.
Also, it was possible to add more than one monitor on a reliable transport for
a given aor and contact.
This patch makes it so all contact removals done by the registrar also remove
any associated transport monitors if necessary. It also makes it so duplicate
monitors cannot be added for a given transport.
ASTERISK-28213
Change-Id: I94b06f9026ed177d6adfd538317c784a42c1b17a
This module allows presence subscriptions to voicemail boxes. This
allows common BLF keys to act as voicemail waiting indicators.
ASTERISK-28301
Change-Id: I62a246c24f3d7d432e33e22d7a4a57c15c292fdd
Delivery timeval in the smoother object will fall behind while a DTMF is
being generated. This can eventually lead to invalid rtp timestamps.
To prevent this from happening the smoother needs to be reset after every
DTMF to keep the timing up to date.
ASTERISK-28303 #close
Change-Id: Iaba3f7b428ebd72a4caa90e13b829ab4f088310f
When listing the applications the apps lock was incorrectly
locked twice instead of being locked and then unlocked.
ASTERISK-28302
Change-Id: If7d064592a9e88c0f1049214c50e02be6dabf79e
When processing SSRC attributes we were iterating through
all of them, even though we only need to know the remote
SSRC once. This was problematic because some browsers group
SSRCs together on a stream, and due to our negotiation only
end up using the first one. Since we set the second one as
the remote SSRC we would drop the received media from them
instead of allowing it through.
In the future this may be extended to allow SSRC groups
and to use information from the attributes.
Change-Id: I4dc87087dbe56a83aa65f0f897bbd4ca75ec1270
Alexander Traud
Pirmin Walthert
bernard merindol
Jaco Kroon
Sean Bright
Joshua C. Colp
George Joseph
Ben Ford
Torrey Searle
Sungtae Kim
Michael Neuhauser
Kevin Harwell
Rodrigo Ramírez Norambuena
lvl
Friendly Automation
Seán C McCord
Jean Aunis
Joshua Colp
Salah Ahmed
Christoph Moench-Tegeder
Alexei Gradinari
sungtae kim
Stas Kobzar
Matt Jordan
Morten Tryfoss
agupta
Dan Cropp
Matthew Fredrickson