482 Commits (99a1a427a9faf02f80b0a05a833f5837f300dc92)

Author	SHA1	Message	Date
Matthew Kern	5e9799a42e	res_pjsip_t38: bind UDPTL sessions like RTP ... In res_pjsip_sdp_rtp, the bind_rtp_to_media_address option and the fallback use of the transport's bind address solve problems sending media on systems that cannot send ipv4 packets on ipv6 sockets, and certain other situations. This change extends both of these behaviors to UDPTL sessions as well in res_pjsip_t38, to fix fax-specific problems on these systems, introducing a new option endpoint/t38_bind_udptl_to_media_address. ASTERISK-29402 Change-Id: I87220c0e9cdd2fe9d156846cb906debe08c63557	4 years ago
Joseph Nadiv	47cb177baf	res_pjsip_registrar: Remove unavailable contacts if exceeds max_contacts ... The behavior of max_contacts and remove_existing are connected. If remove_existing is enabled, the soonest expiring contacts are removed. This may occur when there is an unavailable contact. Similarly, when remove_existing is not enabled, registrations from good endpoints are rejected in favor of retaining unavailable contacts. This commit adds a new AOR option remove_unavailable, and the effect of this setting will depend on remove_existing. If remove_existing is set to no, we will still remove unavailable contacts when they exceed max_contacts, if there are any. If remove_existing is set to yes, we will prioritize the removal of unavailable contacts before those that are expiring soonest. ASTERISK-29525 Change-Id: Ia2711b08f2b4d1177411b1be23e970d7fdff5784	4 years ago
Bernd Zobl	f160725fc4	res_pjsip/pjsip_message_filter: set preferred transport in pjsip_message_filter ... Set preferred transport when querying the local address to use in filter_on_tx_messages(). This prevents the module to erroneously select the wrong transport if more than one transports of the same type (TCP or TLS) are configured. ASTERISK-29241 Change-Id: I598e60257a7f92b29efce1fb3e9a2fc06f1439b6	4 years ago
Joshua C. Colp	44fde9f428	res_pjsip: On partial transport reload also move factories. ... For connection oriented transports PJSIP uses factories to produce transports. When doing a partial transport reload we need to also move the factory of the transport over so that anything referencing the transport (such as an endpoint) has the factory available. ASTERISK-29441 Change-Id: Ieae0fb98eab2d9257cad996a1136e5a62d307161	4 years ago
George Joseph	9cc1d6fc22	res_pjsip_outbound_authenticator_digest: Be tolerant of RFC8760 UASs ... RFC7616 and RFC8760 allow more than one WWW-Authenticate or Proxy-Authenticate header per realm, each with different digest algorithms (including new ones like SHA-256 and SHA-512-256). Thankfully however a UAS can NOT send back multiple Authenticate headers for the same realm with the same digest algorithm. The UAS is also supposed to send the headers in order of preference with the first one being the most preferred. We're supposed to send an Authorization header for the first one we encounter for a realm that we can support. The UAS can also send multiple realms, especially when it's a proxy that has forked the request in which case the proxy will aggregate all of the Authenticate headers and then send them all back to the UAC. It doesn't stop there though... Each realm can require a different username from the others. There's also nothing preventing each digest algorithm from having a unique password although I'm not sure if that adds any benefit. So now... For each Authenticate header we encounter, we have to determine if we support the digest algorithm and, if not, just skip the header. We then have to find an auth object that matches the realm AND the digest algorithm or find a wildcard object that matches the digest algorithm. If we find one, we add it to the results vector and read the next Authenticate header. If the next header is for the same realm AND we already added an auth object for that realm, we skip the header. Otherwise we repeat the process for the next header. In the end, we'll have accumulated a list of credentials we can pass to pjproject that it can use to add Authentication headers to a request. NOTE: Neither we nor pjproject can currently handle digest algorithms other than MD5. We don't even have a place for it in the ast_sip_auth object. For this reason, we just skip processing any Authenticate header that's not MD5. When we support the others, we'll move the check into the loop that searches the objects. Changes: * Added a new API ast_sip_retrieve_auths_vector() that takes in a vector of auth ids (usually supplied on a call to ast_sip_create_request_with_auth()) and populates another vector with the actual objects. * Refactored res_pjsip_outbound_authenticator_digest to handle multiple Authenticate headers and set the stage for handling additional digest algorithms. * Added a pjproject patch that allows them to ignore digest algorithms they don't support. This patch has already been merged upstream. * Updated documentation for auth objects in the XML and in pjsip.conf.sample. * Although res_pjsip_authenticator_digest isn't affected by this change, some debugging and a testsuite AMI event was added to facilitate testing. Discovered during OpenSIPit 2021. ASTERISK-29397 Change-Id: I3aef5ce4fe1d27e48d61268520f284d15d650281	5 years ago
Sean Bright	4a843e00ef	res_pjsip.c: OPTIONS processing can now optionally skip authentication ... ASTERISK-27477 #close Change-Id: I68f6715bba92a525149e35d142a49377a34a1193	5 years ago
Joshua C. Colp	623abc2b6a	res_pjsip: Give error when TLS transport configured but not supported. ... Change-Id: I058af496021ff870ccec2d8cbade637b348ab80b	5 years ago
Joshua C. Colp	71dfbdc7b9	res_pjsip: Add support for partial transport reload. ... Some configuration items for a transport do not result in the underlying transport changing, but instead are just state we keep ourselves and use. It is perfectly reasonable to change these items. These include local_net and external_* information. ASTERISK-29354 Change-Id: I027857ccfe4419f460243e562b5f098434b3d43a	5 years ago
Alexander Traud	10a0a0c59b	pjsip_scheduler: Fix pjsip show scheduled_tasks like for compiler Clang. ... Otherwise, Clang 10 warned because of logical-not-parentheses. Change-Id: Ia8fb493f727b08070eb2dcf520c08df34ed11d79	5 years ago
Nick French	505939c9ed	res_pjsip: Prevent segfault in UDP registration with flow transports ... Segfault occurs during outbound UDP registration when all transport states are being iterated over. The transport object in the transport is accessed, but flow transports have a NULL transport object. Modify to not iterate over any flow transport ASTERISK-29210 #close Change-Id: If28dc3a18bdcbd0a49598b09b7fe4404d45c996a	5 years ago
Alexander Greiner-Baer	fba10fb54c	res_pjsip: set Accept-Encoding to identity in OPTIONS response ... RFC 3261 says that the Accept-Encoding header should be present in an options response. Permitted values according to RFC 2616 are only compression algorithms like gzip or the default identity encoding. Therefore "text/plain" is not a correct value here. As long as the header is hard coded, it should be set to "identity". Without this fix an Alcatel OmniPCX periodically logs warnings like "[sip_acceptIncorrectHeader] Header Accept-Encoding is malformed" on a SIP Trunk. ASTERISK-29165 #close Change-Id: I0aa2211ebf0b4c2ed554ac7cda794523803a3840	5 years ago
George Joseph	5a4640d208	pjsip_scheduler.c: Add type ONESHOT and enhance cli show command ... * Added a ONESHOT type that never reschedules. * Added "like" capability to "pjsip show scheduled_tasks" so you can do the following: CLI> pjsip show scheduled_tasks like outreg PJSIP Scheduled Tasks: Task Name Interval Times Run ... ============================================= ========= ========= ... pjsip/outreg/testtrunk-reg-0-00000074 50.000 oneshot ... pjsip/outreg/voipms-reg-0-00000073 110.000 oneshot ... * Fixed incorrect display of "Next Start". * Compacted the displays of times in the CLI. * Added two new functions (ast_sip_sched_task_get_times2, ast_sip_sched_task_get_times_by_name2) that retrieve the interval, next start time, and next run time in addition to the times already returned by ast_sip_sched_task_get_times(). Change-Id: Ie718ca9fd30490b8a167bedf6b0b06d619dc52f3	5 years ago
Alexander Traud	b52acb87b0	res_pjsip/config_transport: Load and run without OpenSSL. ... ASTERISK-28933 Reported-by: Walter Doekes Change-Id: I65eac49e5b0a79261ea80e2b9b38a836886ed59f	5 years ago
Kevin Harwell	c62193c5de	res_pjsip, res_pjsip_session: initialize local variables ... This patch initializes a couple of local variables to some default values. Interestingly, in the 'pj_status_t dlg_status' case the value not being initialized caused memory to grow, and not be recovered, in the off nominal path (at least on my machine). Change-Id: I22ee65e1e1bff8efacea8a167c6c8428898523f7	5 years ago
Joshua C. Colp	dcd2ed69a3	res_pjsip: Adjust outgoing offer call pref. ... This changes the outgoing offer call preference default option to match the behavior of previous versions of Asterisk. The additional advanced codec negotiation options have also been removed from the sample configuration and marked as reserved for future functionality in XML documentation. The codec preference options have also been fixed to enforce local codec configuration. ASTERISK-29109 Change-Id: Iad19347bd5f3d89900c15ecddfebf5e20950a1c2	5 years ago
Torrey Searle	888090ab18	res_pjsip_diversion: implement support for History-Info ... Implemention of History-Info capable of interworking with Diversion Header following RFC7544 ASTERISK-29027 #close Change-Id: I2296369582d4b295c5ea1e60bec391dd1d318fa6	5 years ago
Joshua C. Colp	447f6cc37a	res_pjsip: Fix codec preference defaults. ... When reading in a codec preference configuration option the value would be set on the respective option before applying any default adjustments, resulting in the configuration not being as expected. This was exposed by the REST API push configuration as it used the configuration returned by Asterisk to then do a modification. In the case of codec preferences one of the options had a transcode value of "unspecified" when the defaults should have ensured it would be "allow" instead. This also renames the options in other places that were missed. Change-Id: I4ad42e74fdf181be2e17bc75901c62591d403964	5 years ago
George Joseph	a15e64aaf5	ACN: Configuration renaming for pjsip endpoint ... This change renames the codec preference endpoint options. incoming_offer_codec_prefs becomes codec_prefs_incoming_offer to keep the options together when showing an endpoint. Change-Id: I6202965b4723777f22a83afcbbafcdafb1d11c8d	5 years ago
Ben Ford	5fbed5af24	res_stir_shaken: Add stir_shaken option and general improvements. ... Added a new configuration option for PJSIP endpoints - stir_shaken. If set to yes, then STIR/SHAKEN support will be added to inbound and outbound INVITEs. The default is no. Alembic has been updated to include this option. Previously the dialplan function was not trimming the whitespace from the parameters it recieved. Now it does. Also added a conditional that, when TEST_FRAMEWORK is enabled, the timestamp in the identity header will be overlooked. This is just for testing, since the testsuite will rely on a SIPp scenario with a preset identity header to trigger the MISMATCH result. Change-Id: I43d67f1489b8c1c5729ed3ca8d71e35ddf438df1	5 years ago
George Joseph	2d22e34206	ACN: res_pjsip endpoint options ... This commit adds the endpoint options required to control Advanced Codec Negotiation. incoming_offer_codec_prefs outgoing_offer_codec_prefs incoming_answer_codec_prefs outgoing_answer_codec_prefs The documentation may need tweaking and some additional edits added, especially for the "answer" prefs. That'll be handled when things finalize. This commit is safe to merge as it doens't alter any existing functionality nor does it alter the previous codec negotiation work which may now be obsolete. Change-Id: I920ba925d7dd36430dfd2ebd9d82d23f123d0e11	5 years ago
sungtae kim	81b5e4a73f	res_pjsip.c: Added disable_rport option for pjsip.conf ... Currently when the pjsip making an outgoing request, it keep adding the rport parameter in a request message as a default. This causes unexpected rport handle at the other end. Added option for disable this behaviour in the pjsip.conf. This is a system option, but working as a gloabl option. ASTERISK-28959 Change-Id: I9596675e52a742774738b5aad5d1fec32f477abc	5 years ago
Joshua C. Colp	4f86118bd8	res_pjsip: Apply AOR outbound proxy to static contacts. ... The outbound proxy for an AOR was not being applied to any statically configured Contacts. This resulted in the OPTIONS requests being sent to the wrong target. This change sets the outbound proxy on statically configured contacts once the AOR configuration is done being applied. ASTERISK-28965 Change-Id: Ia60f3e93ea63f819c5a46bc8b54be2e588dfa9e0	5 years ago
Roger James	c8dec423d2	pjsip_resolver.c: Ensure AAAA dns requests are made. ... 1. Modify sip_resolve and sip_resolve_callback to request AAAA lookups when an IPV6 transport type has been requested. 2. Rename all occurrences of pjsip_transport_get_type_name to pjsip_transport_get_type_desc. This ensures that the log/debug info shows whether the transport is IPv6 or IPv4. 3. Do not add the constant PJSIP_TRANSPORT_IPV6 to existing transport types. This results in invalid values. Use a bitwise or instead. ASTERISK-26780 Patches: pjsip_resolver.c uploaded by Peter Sokolov (License #7070) Change-Id: I8b1e298f8efa682d0a7644113258fe76d9889c58	6 years ago
Joshua C. Colp	d845464c76	res_pjsip: Don't set endpoint to unavailable in all cases. ... When an AOR is modified endpoints are updated that reference the AOR so they can start receiving updates and reflect the correct state. If this is the case then we shouldn't change the endpoint to be offline if it does not reference the AOR but instead only when the endpoint is completely updated for all its AORs. ASTERISK-28056 patches: pjsip_options-aor.diff submitted by jhord (license 6978) Change-Id: I3ee00023be2393113cd4e056599f23f3499ef164	6 years ago
George Joseph	7ba6d43083	test_res_pjsip_session_caps: Create unit test ... This unit test runs through combinations of... * Local codecs * Remote Codecs * Codec Preference * Incoming/Outgoing A few new APIs were created to make it easier to test the functionality but didn't result in any actual functional change. ASTERISK_28777 Change-Id: Ic8957c43e7ceeab0e9272af60ea53f056164f164	6 years ago
George Joseph	2ee455958e	codec_negotiation: Implement outgoing_call_offer_pref ... Based on this new endpoint setting, a joint list of preferred codecs between those received from the Asterisk core (remote), and those specified in the endpoint's "allow" parameter (local) is created and is used to create the outgoing SDP offer. * Add outgoing_call_offer_pref to pjsip_configuration (endpoint) * Add "call_direction" to res_pjsip_session. * Update pjsip_session_caps.c to make the functions more generic so they could be used for both incoming and outgoing. * Update ast_sip_session_create_outgoing to create the pending_media_state->topology with the results of ast_sip_session_create_joint_call_stream(). * The endpoint "preferred_codec_only" option now automatically sets AST_SIP_CALL_CODEC_PREF_FIRST in incoming_call_offer_pref. * A helper function ast_stream_get_format_count() was added to streams to return the current count of formats. ASTERISK-28777 Change-Id: Id4ec0b4a906c2ae5885bf947f101c59059935437	6 years ago
Kevin Harwell	06dada3f01	codec negotiation: add incoming_call_offer_prefs option ... Add a new option, incoming_call_offer_pref, to res_pjsip endpoints that specifies the preferred order of codecs after receiving an offer. This patch does the following: Adds a new enumeration, ast_sip_call_codec_pref, used by the the new configuration option that's added to the endpoint media structure. Adds a new ast_sip_session_caps structure that's set for each session media object. Creates a new file, res_pjsip_session_caps that "implements" the new structure and option, and is compiled into the res_pjsip_session library. ASTERISK-28756 #close Change-Id: I35e7a2a0c236cfb6bd9cdf89539f57a1ffefc76f	6 years ago
Joshua C. Colp	d6712790cd	pjsip: Update ACLs on named ACL changes. ... This change extends the Sorcery API to allow a wizard to be told to explicitly reload objects or a specific object type even if the wizard believes that nothing has changed. This has been leveraged by res_pjsip and res_pjsip_acl to reload endpoints and PJSIP ACLs when a named ACL changes. ASTERISK-28697 Change-Id: Ib8fee9bd9dd490db635132c479127a4114c1ca0b	6 years ago
George Joseph	cbc1136704	res_pjsip_nat: Restore original contact for REGISTER responses ... RFC3261 Section 10 "Registrations", specifically paragraph "10.2.4: Refreshing Bindings", states that a user agent compares each contact address (in a 200 REGISTER response) to see if it created the contact. If the Asterisk endpoint has the rewrite_contact option set however, the contact host and port sent back in the 200 response will be the rewritten one and not the one sent by the user agent. This prevents the user agent from matching its own contact. Some user agents get very upset when this happens and will not consider the registration successful. While this is rare, it is acceptable behavior especially if more than 1 user agent is allowed to register to a single endpoint/aor. This commit updates res_pjsip_nat (where rewrite_contact is implemented) to store the original incoming Contact header in a new "x-ast-orig-host" URI parameter before rewriting it, and to restore the original host and port to the Contact headers in the outgoing response. This is only done if the request is a REGISTER and rewrite_contact is enabled. pjsip_message_filter was also updated to ensure that if a request comes in with any existing x-ast-* URI parameters, we remove them so they don't conflict. Asterisk will never send a request with those headers in it but someone might just decide to add them to a request they craft and send to Asterisk. NOTE: If a device changes its contact address and registers again, it's a NEW registration. If the device didn't unregister the original registration then all existing behavior based on aor/remove_existing and aor/max_contacts apply. ASTERISK-28502 Reported-by: Ross Beer Change-Id: Idc263ad2d2d7bd8faa047e5804d96a5fe1cd282e	6 years ago
Kevin Harwell	bdd785d31c	various files - fix some alerts raised by lgtm code analysis ... This patch fixes several issues reported by the lgtm code analysis tool: https://lgtm.com/projects/g/asterisk/asterisk Not all reported issues were addressed in this patch. This patch mostly fixes confirmed reported errors, potential problematic code points, and a few other "low hanging" warnings or recommendations found in core supported modules. These include, but are not limited to the following: * innapropriate stack allocation in loops * buffer overflows * variable declaration "hiding" another variable declaration * comparisons results that are always the same * ambiguously signed bit-field members * missing header guards Change-Id: Id4a881686605d26c94ab5409bc70fcc21efacc25	6 years ago
Sean Bright	32ce6e9a06	channels: Allow updating variable value ... When modifying an already defined variable in some channel drivers they add a new variable with the same name to the list, but that value is never used, only the first one found. Introduce ast_variable_list_replace() and use it where appropriate. ASTERISK-23756 #close Patches: setvar-multiplie.patch submitted by Michael Goryainov Change-Id: Ie1897a96c82b8945e752733612ee963686f32839	6 years ago
Joshua Colp	86452c9fa4	res_pjsip: Fix multiple of the same contact in "pjsip show contacts". ... The code for gathering contacts could result in the same contact being retrieved and added to the list multiple times. The container which stores the contacts to display will now only allow a contact to be added to it once instead of multiple times. ASTERISK-28228 Change-Id: I805185cfcec03340f57d2b9e6cc43c49401812df	6 years ago
Ben Ford	86836e0442	pjsip_options.c: Allow immediate qualifies for new contacts. ... When multiple endpoints try to register close together using the same AOR with qualify_frequency set, one contact would qualify immediately while the other contacts would have to wait out the duration of the timer before being able to qualify. Changing the conditional to check the contact container count for a non-zero value allows all contacts to qualify immediately. Change-Id: I79478118ee7e0d6e76af7c354d66684220db9415	7 years ago
Joshua Colp	9c070a4ae3	Merge "res_pjsip: Added a norefersub configuration setting"	7 years ago
Dan Cropp	cffa2a74cb	res_pjsip: Added a norefersub configuration setting ... Added a new PJSIP global setting called norefersub. Default is true to keep support working as before. res_pjsip_refer: Configures PJSIP norefersub capability accordingly. Checks the PJSIP global setting value. If it is true (default) it adds the norefersub capability to PJSIP. If it is false (disabled) it does not add the norefersub capability to PJSIP. This is useful for Cisco switches that do not follow RFC4488. ASTERISK-28375 #close Reported-by: Dan Cropp Change-Id: I0b1c28ebc905d881f4a16e752715487a688b30e9	7 years ago
Alexei Gradinari	fe58bc7bdf	res_pjsip: Fix transport_states ref leak ... Add missing ao2_ref(transport_state, -1) while iterate on a transport_states container. Change-Id: I40e35b5a339121300c80075c30db47201a6c374e	7 years ago
Torrey Searle	4661c08549	chan_pjsip: add a flag to ignore 183 responses if no SDP present ... chan_sip will always ignore 183 responses that do not contain SDP however, chan_pjsip will currently always translate it into a 183 with SDP. This new flag allows chan_pjsip to have the same behavior as chan_sip. ASTERISK-28322 #close Change-Id: If81cfaa17c11b6ac703e3d71696f259d86c6be4a	7 years ago
Joshua Colp	c20b84e35b	Merge "res_pjsip_registrar: blocked threads on reliable transport shutdown take 3"	7 years ago
Sean Bright	101272d0dc	Revert "pjsip_message_filter: Only do interface lookup for wildcard addresses." ... This reverts commit d524ad523d. Reason for revert: This causes Contact and Via headers to have the wrong transport address. ASTERISK-28309 #close Change-Id: Ibba4d6176f68e39279fcd9a545f81d56e747bed8	7 years ago
Kevin Harwell	930a7fe910	res_pjsip_registrar: blocked threads on reliable transport shutdown take 3 ... When a contact was removed by the registrar it did not always check to see if the circumstances involved a monitored reliable transport. For instance, if the 'remove_existing' option was set to 'true' then when existing contacts were removed due to 'max_contacts' being reached, those existing contacts being removed did not unregister the transport monitor. Also, it was possible to add more than one monitor on a reliable transport for a given aor and contact. This patch makes it so all contact removals done by the registrar also remove any associated transport monitors if necessary. It also makes it so duplicate monitors cannot be added for a given transport. ASTERISK-28213 Change-Id: I94b06f9026ed177d6adfd538317c784a42c1b17a	7 years ago
George Joseph	c2adeb9dc2	taskprocessor: Enable subsystems and overload by subsystem ... To prevent one subsystem's taskprocessors from causing others to stall, new capabilities have been added to taskprocessors. * Any taskprocessor name that has a '/' will have the part before the '/' saved as its "subsystem". Examples: "sorcery/acl-0000006a" and "sorcery/aor-00000019" will be grouped to subsystem "sorcery". "pjsip/distributor-00000025" and "pjsip/distributor-00000026" will bn grouped to subsystem "pjsip". Taskprocessors with no '/' have an empty subsystem. * When a taskprocessor enters high-water alert status and it has a non-empty subsystem, the subsystem alert count will be incremented. * When a taskprocessor leaves high-water alert status and it has a non-empty subsystem, the subsystem alert count will be decremented. * A new api ast_taskprocessor_get_subsystem_alert() has been added that returns the number of taskprocessors in alert for the subsystem. * A new CLI command "core show taskprocessor alerted subsystems" has been added. * A new unit test was addded. REMINDER: The taskprocessor code itself doesn't take any action based on high-water alerts or overloading. It's up to taskprocessor users to check and take action themselves. Currently only the pjsip distributor does this. * A new pjsip/global option "taskprocessor_overload_trigger" has been added that allows the user to select the trigger mechanism the distributor uses to pause accepting new requests. "none": Don't pause on any overload condition. "global": Pause on ANY taskprocessor overload (the default and current behavior) "pjsip_only": Pause only on pjsip taskprocessor overloads. * The core pjsip pool was renamed from "SIP" to "pjsip" so it can be properly grouped into the "pjsip" subsystem. * stasis taskprocessor names were changed to "stasis" as the subsystem. * Sorcery core taskprocessor names were changed to "sorcery" to match the object taskprocessors. Change-Id: I8c19068bb2fc26610a9f0b8624bdf577a04fcd56	7 years ago
Kevin Harwell	f668db9ba0	pjsip/config_global: regcontext context not created ... The context specified by 'regcontext' was not being created, so when Asterisk attempted to later dynamically add an extension it would fail. This patch now creates the context if a 'regcontext' is specified. ASTERISK-28238 Change-Id: I0f36cf4ab0a93ff4b1cc5548d617ecfd45e09265	7 years ago
Sean Bright	20f672539e	pjsip_transport_management: Shutdown transport immediately on disconnect ... The transport management code that checks for idle connections keeps a reference to PJSIP's transport for IDLE_TIMEOUT milliseconds (32000 by default). Because of this, if the transport is closed before this timeout, the idle checking code will keep the transport from actually being shutdown until the timeout expires. Rather than passing the AO2 object to the scheduler task, we just pass its key and look it up when it is time to potentially close the idle connection. The other transport management code handles cleaning up everything else for us. Additionally, because we use the address of the transport when generating its name, we concatenate an incrementing ID to the end of the name to guarantee uniqueness. Related to ASTERISK~28231 Change-Id: I02ee9f4073b6abca9169d30c47aa69b5e8ae9afb	7 years ago
Alexei Gradinari	f0546d1d87	res_pjsip: add option to enable ContactStatus event when contact is updated ... The commit I2f97ebfa79969a36a97bb7b9afd5b6268cf1a07d removed sending out the ContactStatus AMI event when a contact is updated. Thist change broke things which rely on old behavior. This patch adds a new PJSIP global configuration option 'send_contact_status_on_update_registration' to be able to preserve old ContactStatus behavior. By default new behavior, i.e. the ContactStatus event will not be sent when a device refreshes its registration. Change-Id: I706adf7584e7077eb6bde6d9799ca408bc82ce46	7 years ago
Sungtae Kim	8644511cbf	res_pjsip: Patch for res_pjsip_* module load/reload crash ... The session_supplements for the pjsip makes crashes when the module load/unload. ASTERISK-28157 Change-Id: I5b82be3a75d702cf1933d8d1417f44aa10ad1029	7 years ago
Joshua Colp	50ac85cb40	stasis: Segment channel snapshot to reduce creation cost. ... When a channel snapshot was created it used to be done from scratch, copying all data (many strings). This incurs a cost when doing so. This change segments the channel snapshot into different components which can be reused if unchanged from the previous snapshot creation, reducing the cost. In normal cases this results in some pointers being copied with reference count being bumped, some integers being set, and a string or two copied. The other benefit is that it is now possible to determine if a channel snapshot update is redundant and thus stop it before a message is published to stasis. The specific segments in the channel snapshot were split up based on whether they are changed together, how often they are changed, and their general grouping. In practice only 1 (or 0) of the segments actually get changed in normal operation. Invalidation is done by setting a flag on the channel when the segment source is changed, forcing creation of a new segment when the channel snapshot is created. ASTERISK-28119 Change-Id: I5d7ef3df963a88ac47bc187d73c5225c315f8423	7 years ago
Corey Farrell	021ce938ca	astobj2: Remove legacy ao2_container_alloc routine. ... Replace usage of ao2_container_alloc with ao2_container_alloc_hash or ao2_container_alloc_list. Remove ao2_container_alloc macro. Change-Id: I0907d78bc66efc775672df37c8faad00f2f6c088	7 years ago
Chris-Savinovich	a3fc97aa13	res_pjsip: Send a 503 response when overload state if reliable transport. ... When Asterisk's taskprocessors get overloaded we need to reduce the work load. res_pjsip currently ignores new SIP requests and relies on SIP retransmissions in the hope that the overload condition will clear soon enough to handle the retransmitted SIP request. This change adds the following code after ast_taskprocessor_alert_get() has returned TRUE: 1- identifies transport type. If non-udp then send a 503 response 2- if transport type is udp/udp6 then ignore, as before. Change-Id: I1c230b40d43a254ea0f226b7acf9ee480a5d3836	7 years ago
Alexei Gradinari	eee935983b	pjsip: new endpoint's options to control Connected Line updates ... This patch adds new options 'trust_connected_line' and 'send_connected_line' to the endpoint. The option 'trust_connected_line' is to control if connected line updates are accepted from this endpoint. The option 'send_connected_line' is to control if connected line updates can be sent to this endpoint. The default value is 'yes' for both options. Change-Id: I16af967815efd904597ec2f033337e4333d097cd	7 years ago
Torrey Searle	cac4ccef25	res_pjsip_session: add new flag use_callerid_contact ... Add a new global flag to res_pjsip to allow the callerid to be used as the username in the contact header. This allows chan_pjsip to have the same behavour as chan_sip ASTERISK-28087 #close Change-Id: I9a720e058323f6862a91c62f8a8c1a4b5c087b95	7 years ago