5580 Commits (9803156223b8b2bddf7365c9c42bab0faf9bcd21)

Author	SHA1	Message	Date
Sean Bright	57748784c4	res_musiconhold.c: Ensure we're always locked around music state access. ... (cherry picked from commit 65001d26a6)	2 months ago
Sean Bright	e76e572e01	res_musiconhold.c: Annotate when the channel is locked. ... (cherry picked from commit a49d96505b)	2 months ago
Jaco Kroon	9d07194acb	res_musiconhold: Appropriately lock channel during start. ... This relates to #829 This doesn't sully solve the Ops issue, but it solves the specific crash there. Further PRs to follow. In the specific crash the generator was still under construction when moh was being stopped, which then proceeded to close the stream whilst it was still in use. Signed-off-by: Jaco Kroon <jaco@uls.co.za> (cherry picked from commit 7fa200bba0)	2 months ago
George Joseph	a6e61f587b	res_pjsip_authenticator_digest: Fix SEGV if get_authorization_hdr returns NULL. ... In the highly-unlikely event that get_authorization_hdr() couldn't find an Authorization header in a request, trying to get the digest algorithm would cauase a SEGV. We now check that we have an auth header that matches the realm before trying to get the algorithm from it. Resolves: #GHSA-64qc-9x89-rx5j	2 months ago
George Joseph	14e5ca9c6d	res_stir_shaken: Test for missing semicolon in Identity header. ... ast_stir_shaken_vs_verify() now makes sure there's a semicolon in the Identity header to prevent a possible segfault. Resolves: #GHSA-mrq5-74j5-f5cr	2 months ago
George Joseph	a3596583d6	res_stir_shaken.so: Handle X5U certificate chains. ... The verification process will now load a full certificate chain retrieved via the X5U URL instead of loading only the end user cert. * Renamed crypto_load_cert_from_file() and crypto_load_cert_from_memory() to crypto_load_cert_chain_from_file() and crypto_load_cert_chain_from_memory() respectively. * The two load functions now continue to load certs from the file or memory PEMs and store them in a separate stack of untrusted certs specific to the current verification context. * crypto_is_cert_trusted() now uses the stack of untrusted certs that were extracted from the PEM in addition to any untrusted certs that were passed in from the configuration (and any CA certs passed in from the config of course). Resolves: #1272 UserNote: The STIR/SHAKEN verification process will now load a full certificate chain retrieved via the X5U URL instead of loading only the end user cert.	2 months ago
George Joseph	2a3696517a	res_stir_shaken: Add "ignore_sip_date_header" config option. ... UserNote: A new STIR/SHAKEN verification option "ignore_sip_date_header" has been added that when set to true, will cause the verification process to not consider a missing or invalid SIP "Date" header to be a failure. This will make the IAT the sole "truth" for Date in the verification process. The option can be set in the "verification" and "profile" sections of stir_shaken.conf. Also fixed a bug in the port match logic. Resolves: #1251 Resolves: #1271	2 months ago
George Joseph	bd326919a2	res_websocket_client: Add more info to the XML documentation. ... Added "see-also" links to chan_websocket and ARI Outbound WebSocket and added an example configuration for each.	2 months ago
Jaco Kroon	509ca96490	res_odbc: cache_size option to limit the cached connections. ... Signed-off-by: Jaco Kroon <jaco@uls.co.za> UserNote: New cache_size option for res_odbc to on a per class basis limit the number of cached connections. Please reference the sample configuration for details.	2 months ago
Jaco Kroon	fa1a9d2a70	res_odbc: cache_type option for res_odbc. ... This enables setting cache_type classes to a round-robin queueing system rather than the historic stack mechanism. This should result in lower risk of connection drops due to shorter idle times (the first connection to go onto the stack could in theory never be used again, ever, but sit there consuming resources, there could be multiple of these). And with a queue rather than a stack, dead connections are guaranteed to be detected and purged eventually. This should end up better balancing connection_cnt with actual load over time, assuming the database doesn't keep connections open excessively long from it's side. Signed-off-by: Jaco Kroon <jaco@uls.co.za> UserNote: When using res_odbc it should be noted that back-end connections to the underlying database can now be configured to re-use the cached connections in a round-robin manner rather than repeatedly re-using the same connection. This helps to keep connections alive, and to purge dead connections from the system, thus more dynamically adjusting to actual load. The downside is that one could keep too many connections active for a longer time resulting in resource also begin consumed on the database side.	2 months ago
Sean Bright	4432fc70e7	res_pjsip: Fix empty `ActiveChannels` property in AMI responses. ... The logic appears to have been reversed since it was introduced in 05cbf8df. Resolves: #1254	2 months ago
George Joseph	0b29f5c60c	ARI Outbound Websockets ... Asterisk can now establish websocket sessions _to_ your ARI applications as well as accepting websocket sessions _from_ them. Full details: http://s.asterisk.net/ari-outbound-ws Code change summary: * Added an ast_vector_string_join() function, * Added ApplicationRegistered and ApplicationUnregistered ARI events. * Converted res/ari/config.c to use sorcery to process ari.conf. * Added the "outbound-websocket" ARI config object. * Refactored res/ari/ari_websockets.c to handle outbound websockets. * Refactored res/ari/cli.c for the sorcery changeover. * Updated res/res_stasis.c for the sorcery changeover. * Updated apps/app_stasis.c to allow initiating per-call outbound websockets. * Added CLI commands to manage ARI websockets. * Added the new "outbound-websocket" object to ari.conf.sample. * Moved the ARI XML documentation out of res_ari.c into res/ari/ari_doc.xml UserNote: Asterisk can now establish websocket sessions _to_ your ARI applications as well as accepting websocket sessions _from_ them. Full details: http://s.asterisk.net/ari-outbound-ws	2 months ago
George Joseph	b08e093072	res_websocket_client: Create common utilities for websocket clients. ... Since multiple Asterisk capabilities now need to create websocket clients it makes sense to create a common set of utilities rather than making each of those capabilities implement their own. * A new configuration file "websocket_client.conf" is used to store common client parameters in named configuration sections. * APIs are provided to list and retrieve ast_websocket_client objects created from the named configurations. * An API is provided that accepts an ast_websocket_client object, connects to the remote server with retries and returns an ast_websocket object. TLS is supported as is basic authentication. * An observer can be registered to receive notification of loaded or reloaded client objects. * An API is provided to compare an existing client object to one just reloaded and return the fields that were changed. The caller can then decide what action to take based on which fields changed. Also as part of thie commit, several sorcery convenience macros were created to make registering common object fields easier. UserNote: A new module "res_websocket_client" and config file "websocket_client.conf" have been added to support several upcoming new capabilities that need common websocket client configuration.	2 months ago
George Joseph	ed5b222f85	res_pjsip_messaging.c: Mask control characters in received From display name ... Incoming SIP MESSAGEs will now have their From header's display name sanitized by replacing any characters < 32 (space) with a space. Resolves: #GHSA-2grh-7mhv-fcfw	2 months ago
Sven Kube	9027f896e5	res_audiosocket.c: Add retry mechanism for reading data from AudioSocket ... The added retry mechanism addresses an issue that arises when fragmented TCP packets are received, each containing only a portion of an AudioSocket packet. This situation can occur if the external service sending the AudioSocket data has Nagle's algorithm enabled.	2 months ago
Sven Kube	6da27b0e51	res_audiosocket.c: Set the TCP_NODELAY socket option ... Disable Nagle's algorithm by setting the TCP_NODELAY socket option. This reduces latency by preventing delays caused by packet buffering.	2 months ago
Mike Bradeen	33e7cfd0f7	res_pjsip_nat.c: Do not overwrite transfer host ... When a call is transfered via dialplan behind a NAT, the host portion of the Contact header in the 302 will no longer be over-written with the external NAT IP and will retain the hostname. Fixes: #1141	2 months ago
Naveen Albert	479f276408	res_pjsip_caller_id: Also parse URI parameters for ANI2. ... If the isup-oli was sent as a URI parameter, rather than a header parameter, it was not being parsed. Make sure we parse both if needed so the ANI2 is set regardless of which type of parameter the isup-oli is sent as. Resolves: #1220 (cherry picked from commit a3c65fc5d1)	6 months ago
Mike Bradeen	f5d8181eea	stasis/control.c: Set Hangup Cause to No Answer on Dial timeout ... Other Dial operations (dial, app_dial) use Q.850 cause 19 when a dial timeout occurs, but the Dial command via ARI did not set an explicit reason. This resulted in a CANCEL with Normal Call Clearing and corresponding ChannelDestroyed. This change sets the hangup cause to AST_CAUSE_NO_ANSWER to be consistent with the other operations. Fixes: #963 UserNote: A Dial timeout on POST /channels/{channelId}/dial will now result in a CANCEL and ChannelDestroyed with cause 19 / User alerting, no answer. Previously no explicit cause was set, resulting in a cause of 16 / Normal Call Clearing. (cherry picked from commit c9532225f8)	6 months ago
Albrecht Oster	d7b8f1a3a1	res_pjproject: Fix DTLS client check failing on some platforms ... Certain platforms (mainly BSD derivatives) have an additional length field in `sockaddr_in6` and `sockaddr_in`. `ast_sockaddr_from_pj_sockaddr()` does not take this field into account when copying over values from the `pj_sockaddr` into the `ast_sockaddr`. The resulting `ast_sockaddr` will have an uninitialized value for `sin6_len`/`sin_len` while the other `ast_sockaddr` (not converted from a `pj_sockaddr`) to check against in `ast_sockaddr_pj_sockaddr_cmp()` has the correct length value set. This has the effect that `ast_sockaddr_cmp()` will always indicate an address mismatch, because it does a bitwise comparison, and all DTLS packets are dropped even if addresses and ports match. `ast_sockaddr_from_pj_sockaddr()` now checks whether the length fields are available on the current platform and sets the values accordingly. Resolves: #505 (cherry picked from commit 315289b87a)	6 months ago
George Joseph	b4378ff25e	Prequisites for ARI Outbound Websockets ... stasis: * Added stasis_app_is_registered(). * Added stasis_app_control_mark_failed(). * Added stasis_app_control_is_failed(). * Fixed res_stasis_device_state so unsubscribe all works properly. * Modified stasis_app_unregister() to unsubscribe from all event sources. * Modified stasis_app_exec to return -1 if stasis_app_control_is_failed() returns true. http: * Added ast_http_create_basic_auth_header(). md5: * Added define for MD5_DIGEST_LENGTH. tcptls: * Added flag to ast_tcptls_session_args to suppress connection log messages to give callers more control over logging. http_websocket: * Add flag to ast_websocket_client_options to suppress connection log messages to give callers more control over logging. * Added username and password to ast_websocket_client_options to support outbound basic authentication. * Added ast_websocket_result_to_str(). (cherry picked from commit 9d75b0447f)	6 months ago
George Joseph	ea344ecc14	ari_websockets: Fix frack if ARI config fails to load. ... ari_ws_session_registry_dtor() wasn't checking that the container was valid before running ao2_callback on it to shutdown registered sessions. (cherry picked from commit abf8986068)	6 months ago
George Joseph	2a55f064f3	ARI: REST over Websocket ... This commit adds the ability to make ARI REST requests over the same websocket used to receive events. For full details on how to use the new capability, visit... https://docs.asterisk.org/Configuration/Interfaces/Asterisk-REST-Interface-ARI/ARI-REST-over-WebSocket/ Changes: * Added utilities to http.c: * ast_get_http_method_from_string(). * ast_http_parse_post_form(). * Added utilities to json.c: * ast_json_nvp_array_to_ast_variables(). * ast_variables_to_json_nvp_array(). * Added definitions for new events to carry REST responses. * Created res/ari/ari_websocket_requests.c to house the new request handlers. * Moved non-event specific code out of res/ari/resource_events.c into res/ari/ari_websockets.c * Refactored res/res_ari.c to move non-http code out of ast_ari_callback() (which is http specific) and into ast_ari_invoke() so it can be shared between both the http and websocket transports. UpgradeNote: This commit adds the ability to make ARI REST requests over the same websocket used to receive events. See https://docs.asterisk.org/Configuration/Interfaces/Asterisk-REST-Interface-ARI/ARI-REST-over-WebSocket/ (cherry picked from commit 1442c17141)	6 months ago
Florent CHAUVEAU	a15e4043ce	audiosocket: added support for DTMF frames ... Updated the AudioSocket protocol to allow sending DTMF frames. AST_FRAME_DTMF frames are now forwarded to the server, in addition to AST_FRAME_AUDIO frames. A new payload type AST_AUDIOSOCKET_KIND_DTMF with value 0x03 was added to the protocol. The payload is a 1-byte ascii representing the DTMF digit (0-9,*,#...). UserNote: The AudioSocket protocol now forwards DTMF frames with payload type 0x03. The payload is a 1-byte ascii representing the DTMF digit (0-9,*,#...). (cherry picked from commit c2444b188a)	6 months ago
Norm Harrison	d045f290b7	audiosocket: fix timeout, fix dialplan app exit, server address in logs ... - Correct wait timeout logic in the dialplan application. - Include server address in log messages for better traceability. - Allow dialplan app to exit gracefully on hangup messages and socket closure. - Optimize I/O by reducing redundant read()/write() operations. Co-authored-by: Florent CHAUVEAU <florentch@pm.me> (cherry picked from commit a6ef41e4ca)	6 months ago
Mark Murawski	d18b6bb9b3	chan_pjsip: Add the same details as PJSIPShowContacts to the CLI via 'pjsip show contact' ... CLI 'pjsip show contact' does not show enough information. One must telnet to AMI or write a script to ask Asterisk for example what the User-Agent is on a Contact This feature adds the same details as PJSIPShowContacts to the CLI Resolves: #643 (cherry picked from commit fa69682c28)	6 months ago
Alexei Gradinari	04ed031b62	chan_pjsip: set correct Endpoint Device State on multiple channels ... 1. When one channel is placed on hold, the device state is set to ONHOLD without checking other channels states. In case of AST_CONTROL_HOLD set the device state as AST_DEVICE_UNKNOWN to calculate aggregate device state of all active channels. 2. The current implementation incorrectly classifies channels in use. The only channels that has the states: UP, RING and BUSY are considered as "in use". A channel should be considered "in use" if its state is anything other than DOWN or RESERVED. 3. Currently, if the number of channels "in use" is greater than device_state_busy_at, the system does not set the state to BUSY. Instead, it incorrectly assigns an aggregate device state. The endpoint device state should be BUSY if the number of channels "in use" is greater than or equal to device_state_busy_at. Fixes: #1181 (cherry picked from commit b82d9b0d5b)	6 months ago
Sean Bright	d9f1b1598f	res_config_curl.c: Remove unnecessary warnings. ... Resolves: #1164 (cherry picked from commit 0900f83820)	8 months ago
Sean Bright	ff8ec30efb	res_rtp_asterisk.c: Don't truncate spec-compliant `ice-ufrag` or `ice-pwd`. ... RFC 8839[1] indicates that the `ice-ufrag` and `ice-pwd` attributes can be up to 256 bytes long. While we don't generate values of that size, we should be able to accomodate them without truncating. 1. https://www.rfc-editor.org/rfc/rfc8839#name-ice-ufrag-and-ice-pwd-attri (cherry picked from commit 25aff1a887)	8 months ago
Joshua Elson	4a1129b893	fix: Correct default flag for tcp_keepalive_enable option ... Resolves an issue where the tcp_keepalive_enable option was not properly enabled in the sample configuration due to an incorrect default flag setting. Fixes: #1149 (cherry picked from commit c4232f2940)	8 months ago
Sean Bright	8e900950b6	docs: AMI documentation fixes. ... Most of this patch is adding missing PJSIP-related event documentation, but the one functional change was adding a sorcery to-string handler for endpoint's `redirect_method` which was not showing up in the AMI event details or `pjsip show endpoint <endpoint>` output. The rest of the changes are summarized below: * app_agent_pool.c: Typo fix Epoche -> Epoch. * stasis_bridges.c: Add missing AttendedTransfer properties. * stasis_channels.c: Add missing AgentLogoff properties. * pjsip_manager.xml: - Add missing AorList properties. - Add missing AorDetail properties. - Add missing ContactList properties. - Add missing ContactStatusDetail properties. - Add missing EventDetail properties. - Add missing AuthList properties. - Add missing AuthDetail properties. - Add missing TransportDetail properties. - Add missing EndpointList properties. - Add missing IdentifyDetail properties. * res_pjsip_registrar.c: Add missing InboundRegistrationDetail documentation. * res_pjsip_pubsub.c: - Add missing ResourceListDetail documentation. - Add missing InboundSubscriptionDetail documentation. - Add missing OutboundSubscriptionDetail documentation. * res_pjsip_outbound_registration.c: Add missing OutboundRegistrationDetail documentation. (cherry picked from commit f042fb2153)	8 months ago
Maximilian Fridrich	99ef285fff	Revert "res_rtp_asterisk.c: Set Mark on rtp when timestamp skew is too big" ... This reverts commit f30ad96b3f. The original change was not RFC compliant and caused issues because it set the RTP marker bit in cases when it shouldn't be set. See the linked issue #1135 for a detailed explanation. Fixes: #1135. (cherry picked from commit 44ca269adb)	8 months ago
Sean Bright	f5e87a6da3	res_rtp_asterisk.c: Use correct timeout value for T.140 RED timer. ... Found while reviewing #1128 (cherry picked from commit 47e2e59230)	8 months ago
George Joseph	de3d6c03e3	bridging: Fix multiple bridging issues causing SEGVs and FRACKs. ... Issues: * The bridging core allowed multiple bridges to be created with the same unique bridgeId at the same time. Only the last bridge created with the duplicate name was actually saved to the core bridges container. * The bridging core was creating a stasis topic for the bridge and saving it in the bridge->topic field but not increasing its reference count. In the case where two bridges were created with the same uniqueid (which is also the topic name), the second bridge would get the _existing_ topic the first bridge created. When the first bridge was destroyed, it would take the topic with it so when the second bridge attempted to publish a message to it it either FRACKed or SEGVd. * The bridge destructor, which also destroys the bridge topic, is run from the bridge manager thread not the caller's thread. This makes it possible for an ARI developer to create a new one with the same uniqueid believing the old one was destroyed when, in fact, the old one's destructor hadn't completed. This could cause the new bridge to get the old one's topic just before the topic was destroyed. When the new bridge attempted to publish a message on that topic, asterisk could either FRACK or SEGV. * The ARI bridges resource also allowed multiple bridges to be created with the same uniqueid but it kept the duplicate bridges in its app_bridges container. This created a situation where if you added two bridges with the same "bridge1" uniqueid, all operations on "bridge1" were performed on the first bridge created and the second was basically orphaned. If you attempted to delete what you thought was the second bridge, you actually deleted the first one created. Changes: * A new API `ast_bridge_topic_exists(uniqueid)` was created to determine if a topic already exists for a bridge. * `bridge_base_init()` in bridge.c and `ast_ari_bridges_create()` in resource_bridges.c now call `ast_bridge_topic_exists(uniqueid)` to check if a bridge with the requested uniqueid already exists and will fail if it does. * `bridge_register()` in bridges.c now checks the core bridges container to make sure a bridge doesn't already exist with the requested uniqueid. Although most callers of `bridge_register()` will have already called `bridge_base_init()`, which will now fail on duplicate bridges, there is no guarantee of this so we must check again. * The core bridges container allocation was changed to reject duplicate uniqueids instead of silently replacing an existing one. This is a "belt and suspenders" check. * A global mutex was added to bridge.c to prevent concurrent calls to `bridge_base_init()` and `bridge_register()`. * Even though you can no longer create multiple bridges with the same uniqueid at the same time, it's still possible that the bridge topic might be destroyed while a second bridge with the same uniqueid was trying to use it. To address this, the bridging core now increments the reference count on bridge->topic when a bridge is created and decrements it when the bridge is destroyed. * `bridge_create_common()` in res_stasis.c now checks the stasis app_bridges container to make sure a bridge with the requested uniqueid doesn't already exist. This may seem like overkill but there are so many entrypoints to bridge creation that we need to be safe and catch issues as soon in the process as possible. * The stasis app_bridges container allocation was changed to reject duplicate uniqueids instead of adding them. This is a "belt and suspenders" check. * The `bridge show all` CLI command now shows the bridge name as well as the bridge id. * Response code 409 "Conflict" was added as a possible response from the ARI bridge create resources to signal that a bridge with the requested uniqueid already exists. * Additional debugging was added to multiple bridging and stasis files. Resolves: #211 (cherry picked from commit 169b9b9a4f)	8 months ago
George Joseph	26ea320f3c	res_config_pgsql: Fix regression that removed dbname config. ... A recent commit accidentally removed the code that sets dbname. This commit adds it back in. Resolves: #1119 (cherry picked from commit aef37c2a65)	8 months ago
George Joseph	3ec2a680f2	res_stir_shaken: Allow missing or anonymous CID to continue to the dialplan. ... The verification check for missing or anonymous callerid was happening before the endpoint's profile was retrieved which meant that the failure_action parameter wasn't available. Therefore, if verification was enabled and there was no callerid or it was "anonymous", the call was immediately terminated instead of giving the dialplan the ability to decide what to do with the call. * The callerid check now happens after the verification context is created and the endpoint's stir_shaken_profile is available. * The check now processes the callerid failure just as it does for other verification failures and respects the failure_action parameter. If set to "continue" or "continue_return_reason", `STIR_SHAKEN(0,verify_result)` in the dialplan will return "invalid_or_no_callerid". * If the endpoint's failure_action is "reject_request", the call will be rejected with `433 "Anonymity Disallowed"`. * If the endpoint's failure_action is "continue_return_reason", the call will continue but a `Reason: STIR; cause=433; text="Anonymity Disallowed"` header will be added to the next provisional or final response. Resolves: #1112 (cherry picked from commit 85fa81ad45)	8 months ago
George Joseph	619cb75688	resource_channels.c: Fix memory leak in ast_ari_channels_external_media. ... Between ast_ari_channels_external_media(), external_media_rtp_udp(), and external_media_audiosocket_tcp(), the `variables` structure being passed around wasn't being cleaned up properly when there was a failure. * In ast_ari_channels_external_media(), the `variables` structure is now defined with RAII_VAR to ensure it always gets cleaned up. * The ast_variables_destroy() call was removed from external_media_rtp_udp(). * The ast_variables_destroy() call was removed from external_media_audiosocket_tcp(), its `endpoint` allocation was changed to to use ast_asprintf() as external_media_rtp_udp() does, and it now returns an error on failure. * ast_ari_channels_external_media() now checks the new return code from external_media_audiosocket_tcp() and sets the appropriate error response. Resolves: #1109 (cherry picked from commit 1a1eb88211)	8 months ago
Holger Hans Peter Freyther	fe5ff3021e	ari/pjsip: Make it possible to control transfers through ARI ... Introduce a ChannelTransfer event and the ability to notify progress to ARI. Implement emitting this event from the PJSIP channel instead of handling the transfer in Asterisk when configured. Introduce a dialplan function to the PJSIP channel to switch between the "core" and "ari-only" behavior. UserNote: Call transfers on the PJSIP channel can now be controlled by ARI. This can be enabled by using the PJSIP_TRANSFER_HANDLING(ari-only) dialplan function. (cherry picked from commit a0d0c47d06)	8 months ago
George Joseph	7863ff70bd	docs: Add version information to AGI command XML elements. ... This process was a bit different than the others because everything is in the same file, there's an array that contains the command names and their handler functions, and the last command was created over 15 years ago. * Dump a `git blame` of res/res_agi.c from BEFORE the handle_* prototypes were changed. * Create a command <> handler function xref by parsing the the agi_command array. * For each entry, grep the function definition line "static int handle_*" from the git blame output and capture the commit. This will be the commit the command was created in. * Do a `git tag --contains <commit> | sort -V | head -1` to get the tag the function was created in. * Add a single since/version element to the command XML. Multiple versions aren't supported here because the branching and tagging scheme changed several times in the 2000's. (cherry picked from commit 8dd5c23494)	8 months ago
Sean Bright	8a3a2958c1	docs: Indent <since> tags. ... Also updates the 'since' of applications/functions that existed before XML documentation was introduced (1.6.2.0). (cherry picked from commit 67e89b3e77)	8 months ago
George Joseph	5ac0874240	res_pjsip_authenticator_digest: Make correct error messages appear again. ... When an incoming request can't be matched to an endpoint, the "artificial" auth object is used to create a challenge to return in a 401 response and we emit a "No matching endpoint found" log message. If the client then responds with an Authorization header but the request still can't be matched to an endpoint, the verification will fail and, as before, we'll create a challenge to return in a 401 response and we emit a "No matching endpoint found" log message. HOWEVER, because there WAS an Authorization header and it failed verification, we should have also been emitting a "Failed to authenticate" log message but weren't because there was a check that short-circuited that it if the artificial auth was used. Since many admins use the "Failed to authenticate" message with log parsers like fail2ban, those attempts were not being recognized as suspicious. Changes: * digest_check_auth() now always emits the "Failed to authenticate" log message if verification of an Authorization header failed even if the artificial auth was used. * The verification logic was refactored to be clearer about the handling of the return codes from verify(). * Comments were added clarify what return codes digest_check_auth() should return to the distributor and the implications of changing them. Resolves: #1095	9 months ago
George Joseph	00de10c0d1	res_pjsip: Fix startup/reload memory leak in config_auth. ... An issue in config_auth.c:ast_sip_auth_digest_algorithms_vector_init() was causing double allocations for the two supported_algorithms vectors to the tune of 915 bytes. The leak only happens on startup and when a reload is done and doesn't get bigger with the number of auth objects defined. * Pre-initialized the two vectors in config_auth:auth_alloc(). * Removed the allocations in ast_sip_auth_digest_algorithms_vector_init(). * Added a note to the doc for ast_sip_auth_digest_algorithms_vector_init() noting that the vector passed in should be initialized and empty. * Simplified the create_artificial_auth() function in pjsip_distributor. * Set the vector initialization count to 0 in config_global:global_apply().	9 months ago
George Joseph	ce550fc1b0	docs: Add version information to application and function XML elements ... * Do a git blame on the embedded XML application or function element. * From the commit hash, grab the summary line. * Do a git log --grep <summary> to find the cherry-pick commits in all branches that match. * Do a git patch-id to ensure the commits are all related and didn't get a false match on the summary. * Do a git tag --contains <commit> to find the tags that contain each commit. * Weed out all tags not ..0. * Sort and discard any .0.0 and following tags where the commit appeared in an earlier branch. * The result is a single tag for each branch where the application or function was defined. The applications and functions defined in the following files were done by hand because the XML was extracted from the C source file relatively recently. * channels/pjsip/dialplan_functions_doc.xml * main/logger_doc.xml * main/manager_doc.xml * res/res_geolocation/geoloc_doc.xml * res/res_stir_shaken/stir_shaken_doc.xml (cherry picked from commit f6a193e87e)	9 months ago
George Joseph	b794dda76e	docs: Add version information to manager event instance XML elements ... * Do a git blame on the embedded XML managerEvent elements. * From the commit hash, grab the summary line. * Do a git log --grep <summary> to find the cherry-pick commits in all branches that match. * Do a git patch-id to ensure the commits are all related and didn't get a false match on the summary. * Do a git tag --contains <commit> to find the tags that contain each commit. * Weed out all tags not ..0. * Sort and discard any .0.0 and following tags where the commit appeared in an earlier branch. * The result is a single tag for each branch where the application or function was defined. The events defined in res/res_pjsip/pjsip_manager.xml were done by hand because the XML was extracted from the C source file relatively recently. Two bugs were fixed along the way... * The get_documentation awk script was exiting after it processed the first DOCUMENTATION block it found in a file. We have at least 1 source file with multiple DOCUMENTATION blocks so only the first one in them was being processed. The awk script was changed to continue searching rather than exiting after the first block. * Fixing the awk script revealed an issue in logger.c where the third DOCUMENTATION block contained a XML fragment that consisted only of a managerEventInstance element that wasn't wrapped in a managerEvent element. Since logger_doc.xml already existed, the remaining fragments in logger.c were moved to it and properly organized. (cherry picked from commit 936e88512e)	9 months ago
Sean Bright	38fb02351c	res_prometheus.c: Set Content-Type header on /metrics response. ... This should resolve the Prometheus error: > Error scraping target: non-compliant scrape target sending blank Content-Type and no fallback_scrape_protocol specified for target. Resolves: #1075 (cherry picked from commit 2d958812ad)	9 months ago
George Joseph	3df8b857ea	docs: Add version information to configObject and configOption XML elements ... Most of the configObjects and configOptions that are implemented with ACO or Sorcery now have `<since>/<version>` elements added. There are probably some that the script I used didn't catch. The version tags were determined by the following... * Do a git blame on the API call that created the object or option. * From the commit hash, grab the summary line. * Do a `git log --grep <summary>` to find the cherry-pick commits in all branches that match. * Do a `git patch-id` to ensure the commits are all related and didn't get a false match on the summary. * Do a `git tag --contains <commit>` to find the tags that contain each commit. * Weed out all tags not <major>.<minor>.0. * Sort and discard any <major>.0.0 and following tags where the commit appeared in an earlier branch. * The result is a single tag for each branch where the API was last touched. configObjects and configOptions elements implemented with the base ast_config APIs were just not possible to find due to the non-deterministic way they are accessed. Also note that if the API call was on modified after it was added, the version will be the one it was last modified in. Final note: The configObject and configOption elements were introduced in 12.0.0 so options created before then may not have any XML documentation. (cherry picked from commit 772221c82a)	9 months ago
George Joseph	791d8fbbc0	res_pjsip_authenticator_digest: Fix issue with missing auth and DONT_OPTIMIZE ... The return code fom digest_check_auth wasn't explicitly being initialized. The return code also wasn't explicitly set to CHALLENGE when challenges were sent. When optimization was turned off (DONT_OPTIMIZE), the compiler was setting it to "0"(CHALLENGE) which worked fine. However, with optimization turned on, it was setting it to "1" (SUCCESS) so if there was no incoming Authorization header, the function was returning SUCCESS to the distributor allowing the request to incorrectly succeed. The return code is now initialized correctly and is now explicitly set to CHALLENGE when we send challenges. (cherry picked from commit fb533fcc73)	9 months ago
George Joseph	3a45e487cd	docs: Various XML fixes ... * channels/pjsip/dialplan_functions_doc.xml: Added xmlns:xi to docs element. * main/bucket.c: Removed XML completely since the "bucket" and "file" objects are internal only with no config file. * main/named_acl.c: Fixed the configFile element name. It was "named_acl.conf" and should have been "acl.conf" * res/res_geolocation/geoloc_doc.xml: Added xmlns:xi to docs element. * res/res_http_media_cache.c: Fixed the configFile element name. It was "http_media_cache.conf" and should have been "res_http_media_cache.conf". (cherry picked from commit 15ed357747)	9 months ago
George Joseph	2b428734fd	docs: Enable since/version handling for XML, CLI and ARI documentation ... * Added the "since" element to the XML configObject and configOption elements in appdocsxml.dtd. * Added the "Since" section to the following CLI output: ``` config show help <module> <object> config show help <module> <object> <option> core show application <app> core show function <func> manager show command <command> manager show event <event> agi show commands topic <topic> ``` * Refactored the commands above to output their sections in the same order: Synopsis, Since, Description, Syntax, Arguments, SeeAlso * Refactored the commands above so they all use the same pattern for writing the output to the CLI. * Fixed several memory leaks caused by failure to free temporary output buffers. * Added a "since" array to the mustache template for the top-level resources (Channel, Endpoint, etc.) and to the paths/methods underneath them. These will be added to the generated markdown if present. Example: ``` "resourcePath": "/api-docs/channels.{format}", "requiresModules": [ "res_stasis_answer", "res_stasis_playback", "res_stasis_recording", "res_stasis_snoop" ], "since": [ "18.0.0", "21.0.0" ], "apis": [ { "path": "/channels", "description": "Active channels", "operations": [ { "httpMethod": "GET", "since": [ "18.6.0", "21.8.0" ], "summary": "List all active channels in Asterisk.", "nickname": "list", "responseClass": "List[Channel]" }, ``` NOTE: No versioning information is actually added in this commit. Those will be added separately and instructions for adding and maintaining them will be published on the documentation site at a later date. (cherry picked from commit 3c867e6e6c)	9 months ago
Artem Umerov	e35d341cd7	logger.h: Fix build when AST_DEVMODE is not defined. ... Resolves: #1058 (cherry picked from commit 92d69897b7)	9 months ago