In ast_frdup the frame data union does not get set to point to malloced memory
if the datalen is zero, so make sure to handle the same case in ast_frisolate
appropriately.
(closes issue #16058)
Reported by: atis
Patches:
bug16058-fix.patch uploaded by jpeeler (license 325)
Tested by: atis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243244 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to improve readability, the output from 'test show
registered' has been modified to truncate fields to fit within
the format output if they are over a certain length.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243242 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch removes code that was duplicated from pbx.c to manager.c
in order to prevent API change in released versions of Asterisk.
There are propably also other places that would benefit from reading the
return code and react if a function returns error codes on writing a value into it.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@242919 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When this code was developed, we came up with our own XML format for the test
output. I have since started looking at integration with other tools, namely
continuous integration frameworks, and this format seems to be supported
across a number of applications. With these changes in place, I was able
to get Atlassian Bamboo to interpret the test results.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241855 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Allows CDR variables added in cdr.c:set_one_cid to become visable during the call,
by executing ast_cdr_update() early in __ast_pbx run.
Reverts sig_pri changes in trunk that are specific to isdn technology only.
(closes issue #16638)
Reported by: alecdavis
Patches:
cdr_update.diff3.txt uploaded by alecdavis (license 585)
Tested by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241416 65c4cc65-6c06-0410-ace0-fbb531ad65f3
passdata was only being set in pbx_substitue_variables when arguments were
passed.
(closes issue #16406)
(closes issue #16586)
Reported by: DLNoah
Patches:
bug16586v2.patch uploaded by jpeeler (license 325)
Tested by: DLNoah
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241366 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the limit was set past MAX_INT upon answering, the call was immediately
hung up due to overflow from the return of ast_tvdiff_ms (in ast_check_hangup).
The time calculation functions ast_tvdiff_sec and ast_tvdiff_ms have been
changed to return an int64_t to prevent overflow. Also the reporter suggested
adding a message indicating the reason for the call hanging up. Given that the
new limit is so much higher, the message (which would only really be useful in
the overflow scenario) has been made a debug message only.
(closes issue #16006)
Reported by: viraptor
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241143 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r241015 | seanbright | 2010-01-18 14:54:19 -0500 (Mon, 18 Jan 2010) | 12 lines
Plug a memory leak when reading configs with their comments.
While reading through configuration files with the intent of returning their
full contents (comments specifically) we allocated some memory and then forgot
to free it. This doesn't fix 16554 but clears up a leak I had in the lab.
(issue #16554)
Reported by: mav3rick
Patches:
issue16554_20100118.patch uploaded by seanbright (license 71)
Tested by: seanbright
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241016 65c4cc65-6c06-0410-ace0-fbb531ad65f3
We're revisiting the previous patch, albeit with a method that overcomes the
prior criticism that it was not POSIX-compliant.
(closes issue #16602)
Reported by: frawd
Patches:
20100114__issue16602.diff.txt uploaded by tilghman (license 14)
Tested by: frawd
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@240499 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk would crash on startup if MALLOC_DEBUG were set in menuselect. This is because
the manager action UpdateConfig had to resize its string field allocation to set the
description. When the resize occurred, ast_copy_string would crash because we were
attempting to copy a string from a NULL pointer. Setting the strings initially makes
the code much less crashy.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@240420 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The problem was the OUTGOING flag was not getting set properly on the channel,
resulting in pickup failing as ast_read thought the call was inbound. Refer to
170393 for a more verbose description as this is the same exact change.
(closes issue #16539)
Reported by: syspert
Patches:
bug16539.patch uploaded by jpeeler (license 325)
Tested by: syspert
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@240179 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Specifically, by setting TESTTIME() to a particular date and time, you
can test whether a dialplan correctly branches as was intended. This was
developed after recent questions on the -users list on how to test their
holiday dialplan logic.
(closes issue #16464)
Reported by: tilghman
Patches:
20100112__issue16464.diff.txt uploaded by tilghman (license 14)
Review: https://reviewboard.asterisk.org/r/458/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239957 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r239838 | jpeeler | 2010-01-13 13:43:33 -0600 (Wed, 13 Jan 2010) | 11 lines
Fix regression for timed out parked call returning to caller
This issue seems to have been exposed by the fix in 160390 whereby using a
masquerade prevented a crash. The new channel used in the masquerade was
not copying the macro information from the old channel.
(closes issue #15459)
Reported by: djrodman
Patches:
patch_15459.txt uploaded by mnick (license )
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239839 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also, made a Makefile change to ensure that the expression parser C source files get
regenerated correctly, when we need that to happen.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239797 65c4cc65-6c06-0410-ace0-fbb531ad65f3
asterisk.conf's 'transmit_silence' option existed before
this patch, but was limited to only generating silence
while recording and sending DTMF. Now enabling the
transmit_silence option generates silence during wait
times as well.
To achieve this, ast_safe_sleep has been modified to
generate silence anytime no other generators are present
and transmit_silence is enabled. Wait apps not using
ast_safe_sleep now generate silence when transmit_silence
is enabled as well.
(closes issue #16524)
Reported by: kobaz
(closes issue #16523)
Reported by: kobaz
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/456/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239712 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The second is the default state for matching CID in the dialplan (no matching)
while the first matches one particular CallerID. This is a regression.
(fixes AST-314, SWP-611)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239571 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There is an issue which only affects trunk and the new ao2_callback OBJ_MULTIPLE
implementation. When both OBJ_MULTIPLE and OBJ_NODATA are passed, only the first
object is visited, regardless of what is returned by the specified callback. This
causes a problem when we are clearing a container, i.e.:
ao2_callback(container, OBJ_UNLINK | OBJ_NODATA | OBJ_MULTIPLE, NULL, NULL);
Only unlinks the first object. This patch resolves this.
(closes issue #16564)
Reported by: pj
Patches:
issue16564_20100111.diff uploaded by seanbright (license 71)
Tested by: pj, seanbright
Review: https://reviewboard.asterisk.org/r/457/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239113 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes a crash on Solaris.
(closes issue #16572)
Reported by: crjw
Patches:
frame_changes.patch uploaded by crjw (license 963)
Plus several others found and fixed by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239074 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During the process of removing an audiohook from one channel
and attaching it to another the audiohook's status is updated
to DONE and then back to whatever it was previously. Typically
updating the status after setting it to DONE is not a good idea
because DONE can trigger unrecoverable audiohook destruction
events... because of this a conditional check was added to
audiohook_update_status to explicitly prevent the audiohook
from ever changing after being set to DONE. It was this check
that prevented audiohook inherit from work properly though.
Now ast_audiohook_move_by_source is treated as a special exception,
as the audiohook must be returned to its previous status after
attaching it to the new channel. This is only a safe operation
because the audiohook's lock is held the entire time, otherwise
this could cause trouble.
(closes issue #16522)
Reported by: corruptor
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@238635 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The channel name comparison was not comparing the whole string and therefore
if one channel name was a substring of the other, the bridge would fail.
(closes issue #16528)
Reported by: telecos82
Patches:
res_features_r236843.diff uploaded by telecos82 (license 687)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@238134 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During a module reload if multiple extension configs are present,
such as both extensions.conf and extensions.ael, watchers for one
config's hints will be lost during the merging of the other config.
This happens because hint watchers are only preserved for the
current config being merged. The old context list is destroyed
after the merging takes place, meaning any watchers that were not
perserved will be removed.
Now all hints are preserved during merging regardless of what config
file is being merged. These hints are only restored if they
are present within the new context list.
(closes issue #16093)
Reported by: jlaroff
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@237839 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r237405 | tilghman | 2010-01-04 12:19:00 -0600 (Mon, 04 Jan 2010) | 16 lines
Add a flag to disable the Background behavior, for AGI users.
This is in a section of code that relates to two other issues, namely
issue #14011 and issue #14940), one of which was the behavior of
Background when called with a context argument that matched the current
context. This fix broke FreePBX, however, in a post-Dial situation.
Needless to say, this is an extremely difficult collision of several
different issues. While the use of an exception flag is ugly, fixing all
of the issues linked is rather difficult (although if someone would like
to propose a better solution, we're happy to entertain that suggestion).
(closes issue #16434)
Reported by: rickead2000
Patches:
20091217__issue16434.diff.txt uploaded by tilghman (license 14)
20091222__issue16434__1.6.1.diff.txt uploaded by tilghman (license 14)
Tested by: rickead2000
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@237406 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also add an XXX comment that I'm baffled nobody has ever complained about. We
say "first message", and then we go into language-specific stuff where we
proceed to say..."first message".
(closes issue #15053)
Reported by: dinhtrung
Patches:
vietnamese.ods uploaded by dinhtrung (license 776)
app_voicemail.c.diff uploaded by dinhtrung (license 776)
(closes issue #15626)
Reported by: dinhtrung
Patches:
say.c.diff uploaded by dinhtrung (license 776)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@237050 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Modified handle_verbose to be LOW_MEMORY aware, removed old RTP related code
in chan_sip.
(closes issue #16381)
Reported by: michael_iedema
Patches:
ast_complete_source_filename.patch uploaded by michael iedema (license 942)
modified by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@236893 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Unit Test Framework is a new API that manages registration and
execution of unit tests in Asterisk with the purpose of verifying the
operation of C functions. The Framework consists of a single test
manager accompanied by a list of registered test functions defined
within the code. A test is defined, registered, and unregistered
from the framework using a set of macros which allow the test code
to only be compiled within asterisk when the TEST_FRAMEWORK flag is
enabled in menuselect. This allows the test code to exist in the
same file as the C functions it intends to verify. Registered tests
may be viewed and executed via a set of new CLI commands. CLI commands
are also present for generating and exporting test results into xml
and txt formats.
For more information and use cases please refer to the documentation
provided at the beginning of the test.h file.
Review: https://reviewboard.asterisk.org/r/447/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@236027 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r235635 | jpeeler | 2009-12-18 16:29:51 -0600 (Fri, 18 Dec 2009) | 48 lines
Correct CDR dispositions for BUSY/FAILED
This patch is simple in that it reorders the disposition defines so that the fix
for issue 12946 works properly (the default CDR disposition was changed to
AST_CDR_NOANSWER). Also, the AST_CDR_FLAG_ORIGINATED flag was set in ast_call to
ensure all CDR records are written.
The side effects of CDR changes are scary, so I'm documenting the test cases
performed to attempt to catch any regressions. The following tests were all
performed using 1.4 rev 195881 vs head (235571) + patch:
A calls B
C calls B (busy)
Hangup C
Hangup A
(Both SIP and features)
A calls B
A blind transfers to C
Hangup C
(Both SIP and features)
A calls B
A attended transfers to C
Hangup C
A calls B
A attended transfers to C (SIP)
C blind transfers to A (features)
Hangup A
All of the test scenario CDRs matched.
The following tests were performed just with the patch to ensure proper operation
(with unanswered=yes):
exten =>s,1,Answer
exten =>s,n,ResetCDR(w)
exten =>s,n,ResetCDR(w)
exten =>s,1,ResetCDR(w)
exten =>s,n,ResetCDR(w)
(closes issue #16180)
Reported by: aatef
Patches:
bug16180.patch uploaded by jpeeler (license 325)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@235660 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r235421 | tilghman | 2009-12-17 11:17:51 -0600 (Thu, 17 Dec 2009) | 8 lines
Use context from which Macro is executed, not macro context, if applicable.
Also, ensure that the extension COULD match, not just that it won't match more.
(closes issue #16113)
Reported by: OrNix
Patches:
20091216__issue16113.diff.txt uploaded by tilghman (license 14)
Tested by: OrNix
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@235422 65c4cc65-6c06-0410-ace0-fbb531ad65f3
New parameters ExtraContext, ExtraExtension, and ExtraPriority have been added
to redirect the second channel to a different location. Previously, it was only
possible to redirect both channels to the same place.
(closes issue #15853)
Reported by: haakon
Patches:
trunk-manager.c.patch uploaded by haakon (license 880)
Tested by: jpeeler
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@235265 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As described in the CHANGES file:
* MeetMe has a new option 'G' to play an announcement before joining a
conference.
* Page has a new option 'A(x)' which will playback an announcement
simultaneously to all paged phones (and optionally excluding the caller's one
using the new option 'n') before the call is bridged.
To add the new option to meetme, the conference flag options had to be extended
to 64 bits.
(closes issue #14365)
Reported by: dferrer
Patches:
page_announce.patch uploaded by dferrer (license 525)
modified by me
Review: https://reviewboard.asterisk.org/r/188/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@234173 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r233092 | russell | 2009-12-04 11:12:47 -0600 (Fri, 04 Dec 2009) | 7 lines
Only do frame payload check for HOLD frames.
This code was added for helping to debug the source of invalid HOLD frames.
However, a side effect of this is that it will incorrectly report errors for
frames that have an integer payload. Make the check for this block specific
to the HOLD frame case.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@233100 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r233014 | mnick | 2009-12-04 09:17:03 -0600 (Fri, 04 Dec 2009) | 11 lines
Warning message gets displayed only once
Added additional field 'int display_inband_dtmf_warning', which when set to '1' displays the warning ('Inband DTMF is not supported on codec %s. Use RFC2833'), and when set to '0' doesn't display the warning. Otherwise you would get hundreds of warnings every second.
(closes issue #15769)
Reported by: falves11
Patches:
patch_15769_14.txt uploaded by mnick (license 874)
Tested by: mnick, falves11
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@233046 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This option can be used to enable #exec support in the asterisk.conf configuration file.
(closes issue #16260)
Reported by: atis
Patches:
exec_includes.patch uploaded by atis (license 242)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@232510 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r231911 | jpeeler | 2009-12-01 15:29:31 -0600 (Tue, 01 Dec 2009) | 12 lines
Fix crash with invalid frame data
The crash was happening as a result of a frame containing an invalid data
pointer, but was set with data length of zero. The few times the issue was
reproduced it _seemed_ that the frame was queued properly, that is the data
pointer was set to NULL. I never could reproduce the crash so as a last resort
the crash has been fixed, but a check in __ast_read has been added to give as
much information about the source of problematic frames in the future.
(closes issue #16058)
Reported by: atis
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231927 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the process of swapping ULAW to a place in the extended codec space, we
found several unhandled cases, where a 32-bit integer was still being used to
handle a codec field. Most of these have been fixed with this commit, although
there is at least one case (codec_dahdi) which depends upon outside headers to
be altered before a conversion can be made.
(Fixes AST-278, SWP-459)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231850 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) Allow users of UDPTL stack to associate a character-string tag with a UDPTL
session, so that log/error/debug messages generated by the UDPTL stack can
be 'connected' to the endpoint that caused them to be generated.
2) Improve comments (and process) of calculating the far end's maximum IFP size
when redundancy mode is in use for error correction.
3) When an IFP larger than the calculated 'far max IFP' size is presented for
writing, truncate it rather than putting in the buffer and allowing the buffer
to overflow; this will cause the ends to retrain to a lower bit rate that
produces IFPs of an appropriate size if possible, and if not possible, the
FAX transfer will fail completely. In these cases, it is due to the one endpoint
supplying a T38FaxMaxDatagram value that is improperly calculated and is
too low to be of use; we have configuration options available to override
this behavior.
4) Eliminate use of T38FaxMaxDatagram value in udptl.conf; it is no longer
needed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Jeff Peeler
David Vossel
Tilghman Lesher
Olle Johansson
Russell Bryant
Mark Michelson
Alec L Davis
Jason Parker
Sean Bright
Matthew Nicholson
Kevin P. Fleming
Matthias Nick
Joshua Colp