If a frame is written to a channel in a bridge we
would normally queue this frame up and the channel
thread would then act upon it. If this frame had no
stream mapping on the channel it would then be
discarded.
This change adds a check before the queueing occurs
to determine if a mapping exists. If it does not
exist then the frame is not even queued at all. This
stops a frame duplication from happening and from
the channel thread having to wake up and deal with
it.
Change-Id: I17189b9b1dec45fc7e4490e8081d444a25a00bda
If the bridge show all command could not get the bridge snapshot, it causes null pointer exception.
Fixed it to check the snapshot is null.
ASTERISK-28920
Change-Id: I3521fc1b832bfc69644d0833f2c78177e1e51f58
What's wrong with ast_debug?
ast_debug is fine for general purpose debug output but it's not
really geared for scope tracing since it doesn't present its
output in a way that makes capturing and analyzing flow through
Asterisk easy.
How is scope tracing better?
Scope tracing uses the same "cleanup" attribute that RAII_VAR
uses to print messages to a separate "trace" log level. Even
better, the messages are indented and unindented based on a
thread-local call depth counter. When output to a separate log
file, the output is uncluttered and easy to follow.
Here's an example of the output. The leading timestamps and
thread ids are removed and the output cut off at 68 columns for
commit message restrictions but you get the idea.
--> res_pjsip_session.c:3680 handle_incoming PJSIP/1173-00000001
--> res_pjsip_session.c:3661 handle_incoming_response PJSIP/1173
--> res_pjsip_session.c:3669 handle_incoming_response PJSIP/
--> chan_pjsip.c:3265 chan_pjsip_incoming_response_after
--> chan_pjsip.c:3194 chan_pjsip_incoming_response P
chan_pjsip.c:3245 chan_pjsip_incoming_respon
<-- chan_pjsip.c:3194 chan_pjsip_incoming_response P
<-- chan_pjsip.c:3265 chan_pjsip_incoming_response_after
<-- res_pjsip_session.c:3669 handle_incoming_response PJSIP/
<-- res_pjsip_session.c:3661 handle_incoming_response PJSIP/1173
<-- res_pjsip_session.c:3680 handle_incoming PJSIP/1173-00000001
The messages with the "-->" or "<--" were produced by including
the following at the top of each function:
SCOPE_TRACE(1, "%s\n", ast_sip_session_get_name(session));
Scope isn't limited to functions any more than RAII_VAR is. You
can also see entry and exit from "if", "for", "while", etc blocks.
There is also an ast_trace() macro that doesn't track entry or
exit but simply outputs a message to the trace log using the
current indent level. The deepest message in the sample
(chan_pjsip.c:3245) was used to indicate which "case" in a
"select" was executed.
How do you use it?
More documentation is available in logger.h but here's an overview:
* Configure with --enable-dev-mode. Like debug, scope tracing
is #ifdef'd out if devmode isn't enabled.
* Add a SCOPE_TRACE() call to the top of your function.
* Set a logger channel in logger.conf to output the "trace" level.
* Use the CLI (or cli.conf) to set a trace level similar to setting
debug level... CLI> core set trace 2 res_pjsip.so
Summary Of Changes:
* Added LOG_TRACE logger level. Actually it occupies the slot
formerly occupied by the now defunct "event" level.
* Added core asterisk option "trace" similar to debug. Includes
ability to specify global trace level in asterisk.conf and CLI
commands to turn on/off and set levels. Levels can be set
globally (probably not a good idea), or by module/source file.
* Updated sample asterisk.conf and logger.conf. Tracing is
disabled by default in both.
* Added __ast_trace() to logger.c which keeps track of the indent
level using TLS. It's #ifdef'd out if devmode isn't enabled.
* Added ast_trace() and SCOPE_TRACE() macros to logger.h.
These are all #ifdef'd out if devmode isn't enabled.
Why not use gcc's -finstrument-functions capability?
gcc's facility doesn't allow access to local data and doesn't
operate on non-function scopes.
Known Issues:
The only know issue is that we currently don't know the line
number where the scope exited. It's reported as the same place
the scope was entered. There's probably a way to get around it
but it might involve looking at the stack and doing an 'addr2line'
to get the line number. Kind of like ast_backtrace() does.
Not sure if it's worth it.
Change-Id: Ic5ebb859883f9c10a08c5630802de33500cad027
fork before exec
Posix does only allow async-signal-safe syscalls after fork before exec.
As asterisk ignores this, functions like TrySystem or System sometimes
end up in a deadlocked child process. The patch prevents the use of
non-async-signal-safe syscalls.
ASTERISK-28776
Change-Id: Idc76365c0592ee3f3b3bd72a4f48f7a098978e8e
ast_stream_topology_create_from_format_cap() was setting the
stream->formats directly but not freeing the default formats. This
causes a memory leak.
* ast_stream_topology_create_from_format_cap() now calls
ast_stream_set_formats() which properly cleans up the existing
stream formats.
When cloning a stream, the source stream's format caps _pointer_ is
copied to the new stream and it's reference count bumped. If
either stream is set to "removed", this will cause _both_ streams
to have their format caps cleared.
* ast_stream_clone() now creates a new format caps object and copies
the formats from the source stream instead of just copying the
pointer.
ASTERISK-28870
Change-Id: If697d81c3658eb7baeea6dab413b13423938fb53
Add a new "masquarade" channel event, and use it in app_queue to track unique id's.
Testcase is submitted as https://gerrit.asterisk.org/c/testsuite/+/14210
ASTERISK-28829 #close
ASTERISK-25844 #close
Change-Id: Ifc5f9f9fd70903f3c6e49738d3bc632b085d2df6
In a Dialplan, the channel drivers 'chan_sip' and 'chan_iax2' support
the channel items 'secure_bridge_media' and 'secure_bridge_signaling'.
That way, a channel can be forced to use encryption even if not
specified in its configuration.
However, when the Local Proxy kicks in, for example, in case of a
forwarding (SIP status 302), Local Proxy stated it does not know those
items. Consequently, such a call could not be proxied how clever your
Dialplan was. Because local calls within Asterisk are always secure,
Local Proxy accepts such a request now.
ASTERISK-22920
Change-Id: I4c143bb70f686790953cc04c5a4b810bbb03636c
While testing the latest RC on FreeBSD I noticed this new file fails to build. On FreeBSD inlcuding resolv.h requires sockaddr_in to be defined, and it's defined in netinet/in.h. So I added this include.
ASTERISK-28853 #close
Change-Id: I6997daf3956e6eb70ab6cb358628d162fad80079
Some places in Asterisk did not treat the formats on a stream
as immutable when they are.
The ast_stream_get_formats function is now const to enforce this
and parts of Asterisk have been updated to take this into account.
Some violations of this were also fixed along the way.
An additional minor tweak is that streams are now allocated with
an empty format capabilities structure removing the need in various
places to check that one is present on the stream.
ASTERISK-28846
Change-Id: I32f29715330db4ff48edd6f1f359090458a9bfbe
When in a conference bridge it may be necessary to have
text messages disabled for specific participants or for
all. This change adds a configuration option, "text_messaging",
which can be used to enable or disable this on the
user profile. By default existing behavior is preserved
as it defaults to "yes".
ASTERISK-28841
Change-Id: I30b5d9ae6f4803881d1ed9300590d405e392bc13
When the ast_data_buffer_put rejects to add a packet, for example because
the buffer already contains a packet with the same sequence number, the
payload will never be freed, resulting in a memory leak.
The data buffer will now return an error if this situation occurs
allowing the caller to free the payload. The res_rtp_asterisk module
has also been updated to do this.
ASTERISK-28826
Change-Id: Ie6c49495d1c921d5f997651c7d0f79646f095cf1
Based on this new endpoint setting, a joint list of preferred codecs
between those received from the Asterisk core (remote), and those
specified in the endpoint's "allow" parameter (local) is created and
is used to create the outgoing SDP offer.
* Add outgoing_call_offer_pref to pjsip_configuration (endpoint)
* Add "call_direction" to res_pjsip_session.
* Update pjsip_session_caps.c to make the functions more generic
so they could be used for both incoming and outgoing.
* Update ast_sip_session_create_outgoing to create the
pending_media_state->topology with the results of
ast_sip_session_create_joint_call_stream().
* The endpoint "preferred_codec_only" option now automatically sets
AST_SIP_CALL_CODEC_PREF_FIRST in incoming_call_offer_pref.
* A helper function ast_stream_get_format_count() was added to
streams to return the current count of formats.
ASTERISK-28777
Change-Id: Id4ec0b4a906c2ae5885bf947f101c59059935437
If a frame handling routine returns a list of frames (vs. a single frame)
those frames are never passed to a tech's write_stream handler even if one is
available. For instance, if a codec translation occurred and that codec
returned multiple frames then those particular frames were always only sent
to the tech's "write" handler. If that tech (pjsip for example) was stream
capable then those frames were essentially ignored. Thus resulting in bad
audio.
This patch makes it so the "write_stream" handler is appropriately called
for all cases, and for all frames if available.
ASTERISK-28795 #close
Change-Id: I868faea0b73a07ed5a32c2b05bb9cf4b586f739d
The dial application had 80 characters of destination length
limitation. But this limitation causes unexpected dial string
cut if the dial string is long.
Removed unnecessary limited buffer to support longer dial
destination.
ASTERISK-27946
Change-Id: I72c8f0319a4b47e8180817a66a7e9bde063cb330
named_acl.c (which is really a named_ha) now uses ast_ha_output.
I've also updated main/manager.c to output the actual ACL on "manager
show user <username>" if one is set. If this works then we can add
similar to other modules as required.
Change-Id: I0ec9876a90dddd379c80ec078d48e3ee6991eb0f
binutils 2.34 merged this commit:
https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commitdiff;\
h=fd3619828e94a24a92cddec42cbc0ab33352eeb4
Which effectively does things like:
-#define bfd_section_size(bfd, ptr) ((ptr)->size)
-#define bfd_get_section_size(ptr) ((ptr)->size)
+#define bfd_section_size(sec) ((sec)->size)
So in order to remain backwards compatible we need to detect this API
change, and adjust accordingly. The simplest is to notice that the
bfd_get_section_size and bfd_get_section_vma MACROs are no longer
defined, and define then onto the new API. The alternative is to litter
the code with a number of #ifdef #else #endif splatters right through
the code.
Change-Id: I3efe0f8e8f3e338d16fcbc2b26a505367b6e172f
Given a scenario where MixMonitor was initiated over AMI it
was possible for the channel and MixMonitor thread to remain
alive past hang up of the channel. This scenario required
the AMI initiated MixMonitor to retrieve the channel, a
hangup to occur on the channel in another thread, and then
for MixMonitor to actually start. If this occurred the
MixMonitor thread would remain alive indefinitely and
the channel reference would remain.
This change ensures that audiohooks are never able to
be attached to channels that have been hung up. An
additional fix has also been done in app_mixmonitor to
properly release the channel reference if this occurs.
ASTERISK-28780
Change-Id: I8044c06daa06f0f16607788c596f55623be26f58
A regular expression in a NAPTR response record can have a trailing
'i' flag to indicate that the expression should be evaluated in a
case-insensitive way. We were not checking for that flag which caused
the record parsing to fail on otherwise valid input.
Although this change will initially go into Asterisk 13, 16, and 17,
it is my intention to replace the majority of this code in 16 and up -
including this fix - by changing enum.c to consume the new DNS API
which duplicates most of this logic already. Asterisk 13 doesn't have
the DNS API, so this fix will be as good as it gets.
ASTERISK-26711 #close
Reported by: Vitold
Change-Id: I33943a5b3e7539c6dca3a5079982ee15a08186f0
The ast_get_txt() API function (and by extension, the TXTCIDNAME
dialplan function) were broken in
65b8381550 such that we would never
actually make a DNS TXT query as described.
This patch restores the documented behavior.
ASTERISK-19460 #close
Reported by: George Joseph
Change-Id: I1b19aea711488cb1ecd63843cddce05010e39376
When a text message was received any associated variable was not written to
the ARI TextMessageReceived event. This occurred because Asterisk only wrote
out "send" variables. However, even those "send" variables would fail ARI
validation due to a TextMessageVariable formatting bug.
Since it seems the TextMessageReceived event has never been able to include
actual variables it was decided to remove the TextMessageVariable object type
from ARI, and simply return a JSON object of key/value pairs for variables.
This aligns more with how the ARI sendMessage handles variables, and other
places in ARI.
ASTERISK-28755 #close
Change-Id: Ia6051c01a53b30cf7edef84c27df4ed4479b8b6f
There were a couple places where the format cap function parameter was not
'const' when it should have been. This patch makes them 'const'.
Change-Id: Ife753fb16a962d842a6b44f45363a61a66bfdb2e
There are exceptions for plural objects, but they are detected using the
supplied NUMBER, not using an extra option.
Change-Id: I95d1d1b2796b1aba92048a2dbae8a3856ed8a113
This change extends the Sorcery API to allow a wizard to be
told to explicitly reload objects or a specific object type
even if the wizard believes that nothing has changed.
This has been leveraged by res_pjsip and res_pjsip_acl to
reload endpoints and PJSIP ACLs when a named ACL changes.
ASTERISK-28697
Change-Id: Ib8fee9bd9dd490db635132c479127a4114c1ca0b
Dump OpenSSL's error stack to the error log when things fail.
ASTERISK-28750 #close
Reported by: Martin Zeh
Change-Id: Ib63cd0df20275586e68ac4c2ddad222ed7bd9c0a
This change adds support to bridge_softmix to allow the addition
and removal of additional video source streams. When such a change
occurs each participant is renegotiated as needed to reflect the
update. If another video source is added then each participant
gets another source. If a video source is removed then it is
removed from each participant. This functionality allows you to
have both your webcam and screenshare providing video if you
desire, or even more streams. Mapping has been changed to use
the topology index on the source channel as a unique identifier
for outgoing participant streams, this will never change and
provides an easy way to establish the mapping.
The bridge_simple and bridge_native_rtp modules have also been
updated to renegotiate when the stream topology of a party changes
allowing the same behavior to occur as added to bridge_softmix.
If a screen share is added then the opposite party is renegotiated.
If that screen share is removed then the opposite party is
renegotiated again.
Some additional fixes are also included in here. Stream state is
now conveyed in SDP so sendonly/recvonly/inactive streams can
be requested. Removed streams now also remove previous state
from themselves so consumers don't get confused.
ASTERISK-28733
Change-Id: I93f41fb41b85646bef71408111c17ccea30cb0c5
When opening a file for writing, Asterisk silently converts filenames
ending with 'wav49' to 'WAV.' We aren't taking that in to account when
setting the MIXMONITOR_FILENAME variable in MixMonitor.
* If the user wants to write to a wav49 file, make sure that it is
reflected properly in MIXMONITOR_FILENAME.
* Add a note to the documentation describing this behavior.
* Add a note in main/file.c indicating that app_mixmonitor needs to be
changed if the logic in build_filename was changed.
ASTERISK-24798 #close
Reported by: xrobau
Change-Id: I384691ce624eb55c80a125b9ca206d2d691c574c
In order to reduce the amount of AMI and ARI events generated,
the global "Message/ast_msg_queue" channel can be set to suppress
it's normal channel housekeeping events such as "Newexten",
"VarSet", etc. This can greatly reduce load on the manager
and ARI applications when the Digium Phone Module for Asterisk
is in use. To enable, set "hide_messaging_ami_events" in
asterisk.conf to "yes" In Asterisk versions <18, the default
is "no" preserving existing behavior. Beginning with
Asterisk 18, the option will default to "yes".
NOTE: This change does not affect UserEvents or the ARI
TextMessageReceived events.
* Added the "hide_messaging_ami_events" option to asterisk.conf.
* Changed message.c to set the AST_CHAN_TP_INTERNAL property on
the "Message/ast_msg_queue" channel if the option is set in
asterisk.conf. This suppresses the reporting of the events.
Change-Id: Ia2e3516d43f4e0df994fc6598565d6bba2d7018b
When Alice calls Bob and Bob does a blind transfer to Charlie,
Bob's bridge leave event generates a finalize on both the party_a
and party_b CDRs but while the party_a CDR has the correct end time
set from the event time, party_b's leg did not. This caused that
CDR's end time to be equal to the answered time and resulted in a
billsec of 0.
* We now pass the bridge leave message event time to
cdr_object_party_b_left_bridge_cb() and set it on that CDR before
calling cdr_object_finalize() on it.
NOTE: This issue affected transfers using chan_sip most of the
time but also occasionally affected chan_pjsip probably due to
message timing.
ASTERISK-28677
Reported by: Maciej Michno
Change-Id: I790720f1e7326f9b8ce8293028743b0ef0fb2cca
Add a new configuration option 'enable_status' which allows the
/httpstatus URI handler to be administratively disabled.
We also no longer unconditionally register the /static and /httpstatus
URI handlers, but instead do it based upon configuration.
Behavior change: If enable_static was turned off, the URI handler was
still installed but returned a 403 when it was accessed. Because we
now register/unregister the URI handlers as appropriate, if the
/static URI is disabled we will return a 404 instead.
Additionally:
* Change 'enablestatic' to 'enable_static' but keep the former for
backwards compatibility.
* Improve some internal variable names
ASTERISK-28710 #close
Change-Id: I647510f796473793b1d3ce1beb32659813be69e1
SILK @ 24kHz is not shown in the 'core show translation' output because of an
off-by-one-error. Discovered while looking into ASTERISK~19871.
ASTERISK-28706
Reported by: Sean Bright
Change-Id: Ie1a551a8a484e07b45c8699cc0c90f1061029510
In af90afd90c, Japanese language support
was added to app_voicemail and main/say.c, but the leading whitespace
is not consistent with Asterisk coding guidelines. This patch fixes
that.
Whitespace only, no functional change.
ASTERISK~23324
Reported by: Kevin McCoy
Change-Id: I72c725f5930084673749bd7c9cc426a987f08e87
Adds source port matching support when IP matching is used:
[example]
type = identify
match = 1.2.3.4:5060/32, 1.2.3.4:6000/32, asterisk.org:4444
If the IP matches but the source port does not, we reject and search for
alternatives. SRV lookups are still performed if enabled (srv_lookups = yes),
unless the configured FQDN includes a port number in which case just a host
lookup is performed.
ASTERISK-28639 #close
Reported by: Mitch Claborn
Change-Id: I256d5bd5d478b95f526e2f80ace31b690eebba92
When a topic is created for an object, its name is only
<object>:<uniqueid>
For example:
bridge:cb68b3a8-fce7-4738-8a17-d7847562f020
When a topic is added to a pool, its name has the pool's topic
name prepended. For example:
bridge:all/bridge:cb68b3a8-fce7-4738-8a17-d7847562f020
The topic_pool_entry's name however, is only what was passed
in to stasis_topic_pool_get_topic which is
bridge:cb68b3a8-fce7-4738-8a17-d7847562f020
That's actually correct because the entry is qualified by the
pool that's in.
When you're ready to delete the entry from the pool, you retrieve
the tropic name from the object but since it now has the pool's
topic name prepended, it won't be found in the pool container.
Fix:
* Modified stasis_topic_pool_delete_topic() to skip past the
pool topic's name, if it was prepended to the topic name,
before searching the container for a pool entry.
ASTERISK-28633
Reported by: Joeran Vinzens
Change-Id: I4396aa69dd83e4ab84c5b91b39293cfdbcf483e6
The Bridge application was inconsistent if the channel to bridge with is
not specified. If no parameters are given then a warning is issued and
the current channel is hung up. If options are given but no channel is
specified then a warning is issued and the current channel is not hung up.
* Made the Bridge application give a verbose message instead of a warning
if the channel to bridge with is not specified and made not hang up the
current channel. As a result dialplan no longer needs to check if a
channel name is passed before calling Bridge and simply needs to check the
BRIDGERESULT channel variable instead. This is something you likely want
your dialplan to do anyway.
* Fixed up L() option warning message. It is up to the caller to
determine if the channel is hung up because of the warning. Dial() hangs
up the current channel while Bridge() does not.
Change-Id: I44349a8dc3912397f28852777de04f19e7bb9c73
When TLS is in use, checking the readiness of the underlying FD is insufficient
for determining if there is data available to be read. So before polling the
FD, check if there is any buffered data in the TLS layer and use that first.
ASTERISK-28562 #close
Reported by: Robert Sutton
Change-Id: I95fcb3e2004700d5cf8e5ee04943f0115b15e10d
The db_init() function ultimately calls db_sync() which signals the
condition before it is initialized.
Change-Id: Id4a4e025b637bc4ac7d90557fcb71d56598892ab
When testing for the existance of a file, the media cache is searched even if
the file has no chance of being in it. This can cause performance issues
as the media cache size increases.
As a result, calls to applications like Read and Playback using local files
must scan through the media cache before playing. Under load and with a
large cache, this can delay the playback of those files.
This patch updates the function that checks for the existance of a file to
only consult the media cache database if the requested file is a remote path.
It introduces a new is_remote_path() function in main/file.c.
ASTERISK-28625 #close
Reported-by: kevin@phoneburner.com
Change-Id: If91137493732d9034dafa381c081c69274a7dcc9
ConfBridge has the ability to move between different sample
rates for mixing the conference bridge. Up until now there has
only been the ability to set the conference bridge to mix at
a specific sample rate, or to let it move between sample rates
as necessary. This change adds the ability to configure a
conference bridge with a maximum sample rate so it can move
between sample rates but only up to the configured maximum.
ASTERISK-28658
Change-Id: Idff80896ccfb8a58a816e4ce9ac4ebde785963ee
Due to use in res_rtp_asterisk there is a need to be able to apply an
ACL without logging any invalid/denies. It's probably sensible to at
least validate the ACL once directly after load and report invalid ACLs.
Change-Id: I256169229d945ca7c1bbf228fc492d91df345843
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
The problem is essentially the same as in ASTERISK~28245. Besides
the direct media scenario we have an additional scenario where a
special client is involved. This device mutes audio by default in
transmit direction (no rtp frames) and activates audio only by a
foot switch. In this situation dtmf input (pin for conferences,
transfer features codes , etc) using SIP INFO mode is not
understood properly especially when SIP INFO messages are sent
quickly.
This patch ensures that SIP INFO frames are properly queued and
processed in the above scenario. The patch also corrects situations
where successive dtmf events are received quicker than the
signalled event duration (plus minimum gap/pause) allows, i.e. DTMF
events have to be buffered in the ast channel read queue and
emulation has to be processed asynchronously at slower speed.
Reported by: Thomas Arimont
patches:
trigger_dtmf_emulation.patch submitted by Thomas Arimont (license 5525)
Change-Id: I309bf61dd065c9978c8e48f5b9a936ab47de64c2
* Use ast_cli_completion_add() to improve performance when large number of
cached items are present.
* Only complete one URI for commands that only accept a single URI.
* Change command documentation to wrap at 80 characters to improve
readability.
Change-Id: Iedb0a2c3541e49561bc231dca2dcc0ebd8612902
If an AMI user without the "system" authorization calls the
Originate AMI command with the Originate application,
the second Originate could run the "System" command.
Action: Originate
Channel: Local/1111
Application: Originate
Data: Local/2222,app,System,touch /tmp/owned
If the "system" authorization isn't set, we now block the
Originate app as well as the System, Exec, etc. apps.
ASTERISK-28580
Reported by: Eliel Sardañons
Change-Id: Ic4c9dedc34c426f03c8c14fce334a71386d8a5fa
The current code sets alert levels starting from index 1.
Need to set on whole pool starting from index 0.
Change-Id: I5decbb43160954fb9a512f04302637fc666b6f5d
This patch fixes several issues reported by the lgtm code analysis tool:
https://lgtm.com/projects/g/asterisk/asterisk
Not all reported issues were addressed in this patch. This patch mostly fixes
confirmed reported errors, potential problematic code points, and a few other
"low hanging" warnings or recommendations found in core supported modules.
These include, but are not limited to the following:
* innapropriate stack allocation in loops
* buffer overflows
* variable declaration "hiding" another variable declaration
* comparisons results that are always the same
* ambiguously signed bit-field members
* missing header guards
Change-Id: Id4a881686605d26c94ab5409bc70fcc21efacc25
* Pass caller information to frame allocation functions.
* Disable caching as it interfers with MALLOC_DEBUG reporting.
* Stop using ast_calloc_cache.
Change-Id: Id343cd80a3db941d2daefde2a060750fea8cd260
Here's the basic scenario that occurred when executing an AMI fast originate
while at the same time something else locks the channels container, and also
wants a lock on the dialed channel:
1. pbx_outgoing_attempt obtains a lock on a dialed channel
2. concurrently another thread obtains a lock on the channels container, and
subsequently requests a lock on the dialed channel. It waits on #1. For
instance, "core show channel <dialed channel"
3. the outgoing call does not fail, but ends before the pbx_outgoing_attempt
function exits
4. pbx_outgoing_attempt function exits, the outgoing structure destructs, and
attempts to hang up the dialed channel
5. hang up tries to obtain the channels container lock, but can't due to #2.
6. Asterisk is deadlocked.
The solution was to allow the pbx_outgoing_exec function to "steal" ownership
of the dialed channel, and handle hanging it up. The channel now is either hung
up prior to it being potentially locked by the initiating thread, or if locked
the hang up takes place in a different thread, thus alleviating the deadlock.
ASTERISK-28561
patches:
iliketrains.diff submitted by Joshua Colp (license 5000)
Change-Id: I51b42b92dde8f2215b69bb509e28667ee3a3853a
Serializer pools have previously existed in Asterisk. However, for the most
part the code has been duplicated across modules. This patch abstracts the
code into an 'ast_serializer_pool' object. As well the code is now centralized
in serializer.c/h.
In addition serializer pools can now optionally be monitored by a shutdown
group. This will prevent the pool from being destroyed until all serializers
have completed.
Change-Id: Ib1e906144b90ffd4d5ed9826f0b719ca9c6d2971
This avoids use of the global variable and ensures topic_all remains
active until all topics are freed.
ASTERISK-28553
patches:
ASTERISK-28553.patch by coreyfarrell (license 5909)
Change-Id: I9a8cd8977f3c3a6aa00783f8336d2cfb9c2820f1
pbx_extension_helper takes two 'context' arguments. One (con) is a
pointer directly to a 'struct ast_context' and the other (context) is
the name of the context. In all cases, one of these arguments is NULL
and the other is non-NULL.
Functions that are ultimately called by pbx_extension_helper expect that
'context' will be non-NULL, so we set it unconditionally on entry into
this function.
ASTERISK-28534 #close
Change-Id: Ifbbc5e71440afd80efd441f7a9d72e8b10b6f47d
Added "like" support for 'core show taskprocessors'. Now you
can specify a specific set of taskprocessors (or just one) by
adding the keyword "like" to the above command, followed by
your search criteria.
Change-Id: I021e740201e9ba487204b5451e46feb0e3222464
This improves the way which stasis_state reference counting works.
Since manager->states holds onto the proxy object instead of the real
object this allows stasis_state objects to be freed when appropriate
without use of a special state_remove function. Additionally each
distinct eid associated with the state holds a reference to the state to
prevent early release and potentially allow easier debug of leaks.
Change-Id: I400e0db4b9afa3d5cb4ac7dad60907897e73f9a9
Added two new CLI commands to reset stats for taskprocessors. You can
reset stats for a single, specific taskprocessor ('core reset
taskprocessor <taskprocessor>'), or you can reset all taskprocessors
('core reset taskprocessors'). These commands will reset the counter for
the number of tasks processed as well as the max queue size.
Change-Id: Iaf17fc4ae29396ab0c6ac92408fc7bdc2f12362d
Previous to this patch passing a NULL tag to ao2_alloc or ao2_ref based
functions would result in the reference not being logged under
REF_DEBUG. This could sometimes cause inaccurate logging if NULL was
accidentally passed to a reference action. Now reference logging is
only disabled by option passed to the allocation method.
Change-Id: I3c17d867d901d53f9fcd512bef4d52e342637b54
You can currently capture backtraces of memory allocations but they
only get displayed when you stop asterisk and the atexit hooks
are enabled. Now, if memory backtrace is on and you issue a
"memory show allocations" CLI command for a specific file, then
a backtrace will show for each allocation that occurred after
you turned "memory backtrace on". The backtrace display is shown
only when a specific file's allocations are displayed to prevent
a massive CLI dump of every file's allocations.
Change-Id: Ic657afc1fc6ec7205e16eb36a97a611d235a2b4f
astobj2.c declares DEBUG_THREADS_LOOSE_ABI to avoid overhead of debug
threads tracking information in the internal structures of astobj2.
Unfortunately this means that ao2_global_obj contains the statically
allocated debug threads tracking fields which are used by initialization
and cleanup but main/astobj2.c believed those fields and associated
space did not exist.
Change-Id: Icef41ad97d88a8c1d1515e034ec8133cab3b1527
It is possible for topic->name to be NULL, this causes the allocation
reference to not be logged. Use the name variable instead which has
been verified to be a non-empty.
Change-Id: I3d0031d03c8356e4808f00cdf2d5428712575883
* Release reference returned by cache_remove
* state_alloc unconditionally bumped state_topic even when it was
locally allocated.
Change-Id: I51101bf7d07b8dc8ce8fc46b6cb31fbbd213fbc7
This change adds support to the JITTERBUFFER dialplan function
for audio and video synchronization. When enabled the RTCP SR
report is used to produce an NTP timestamp for both the audio and
video streams. Using this information the video frames are queued
until their NTP timestamp is equal to or behind the NTP timestamp
of the audio. The audio jitterbuffer acts as the leader deciding
when to shrink/grow the jitterbuffer when adaptive is in use. For
both adaptive and fixed the video buffer follows the size of the
audio jitterbuffer.
ASTERISK-28533
Change-Id: I3fd75160426465e6d46bb2e198c07b9d314a4492
This change adds H.265/HEVC as a known codec and creates a cached
"h265" media format for use.
Note that RFC 7798 section 7.2 also describes additional SDP
parameters. Handling of these is not yet supported.
ASTERISK-28512
Change-Id: I26d262cc4110b4f7e99348a3ddc53bad0d2cd1f2
When modifying an already defined variable in some channel drivers they
add a new variable with the same name to the list, but that value is
never used, only the first one found.
Introduce ast_variable_list_replace() and use it where appropriate.
ASTERISK-23756 #close
Patches:
setvar-multiplie.patch submitted by Michael Goryainov
Change-Id: Ie1897a96c82b8945e752733612ee963686f32839
Added unit tests for RTCP video stats. These tests include NACK, REMB,
FIR/FUR/PLI, SR/RR/SDES, and packet loss statistics. The REMB and FIR
tests are currently disabled due to a bug. We expect to receive a
compound packet, but the code sends this out as a single packet, which
the browser accepts, but makes Asterisk upset.
While writing these tests, I noticed an issue with NACK as well. Where
it is handling a received NACK request, it was reading in only the first
8 bits of following packets that were also lost. This has been changed
to the correct value of 16 bits.
Also made a minor fix to the data buffer unit test.
Change-Id: I56107c7411003a247589bbb6086d25c54719901b
This change removes the assumption that a frame will always have
a src set on it. This assumption is incorrect.
Given a scenario where an RTP packet is received with no payload
the resulting audio frame will have no samples. If this frame goes
through a signed linear translation path an interpolated frame can
be created (if generic packet loss concealment is enabled) that has
minimal data on it, including no src. If this frame is given to a
translation path a crash will occur due to the lack of src.
ASTERISK-28499
Change-Id: I024d10dd98207eb8a6b35b59880bcdf1090538f8
The new function takes in a pointer to an ast_sockaddr structure,
a hostname and an optional port and then dispatches parallel
"AAAA" and "A" record queries. If an "AAAA" record is returned,
it's parsed into the ast_sockaddr structure along with the port
if it was supplied. If no "AAAA" record was returned, the
first "A" record returned (if any) is parsed instead.
This is a synchronous call. If you need asynchronous lookups,
use ast_dns_query_set_resolve_async and roll your own.
Change-Id: I194b0b0e73da94b35cc35263a868ffac3a8d0a95
There are 4 scenarios to consider when capturing audio from a channel
with an audiohook:
1. There is no rx and no tx audio, so return nothing.
2. There is rx but no tx audio, so return rx.
3. There is tx but no rx audio, so return tx.
4. There is rx and tx audio, so mix them and return.
The file passed as the primary argument to MixMonitor will be written to
in scenarios 2, 3, and 4. However, if you pass the r() and t() options
to MixMonitor, a frame will only be written to the r() file if there was
rx audio and a frame will only be written to the t() file if there was
tx audio.
If you subsequently take the r() and t() files and try to mix them, the
sides of the conversation will 'drift' and be non-representative of the
user experience.
This patch adds a new 'S' option to MixMonitor that injects a frame of
silence on either the r() side or the t() side of the channel so that
when later mixed, there is no such drift.
Change-Id: Ibf5ed73a811087727bd561a89a59f4447b4ee20e
Joshua C. Colp
sungtae kim
George Joseph
traud
Pirmin Walthert
Nathan Bruning
Jaco Kroon
Guido Falsi
Jean Aunis
Kevin Harwell
sungtae kim
Sean Bright
Walter Doekes
Richard Mudgett
Kevin Reeves
Friendly Automation
Joshua Colp
Alexei Gradinari
Corey Farrell
Ben Ford
Florian Floimair