asterisk

Commit Graph

Author	SHA1	Message	Date
George Joseph	7666b80378	test.c: Make output jUnit compatible Separate "name" into "classname" and "name". Use '.' for classname separator instead of '/'. Prefix reserved words with '_'. Wrap output with a top-level "testsuites" element. Change-Id: Iec1a985eba1c478e5c1d65d5dfd95cb708442099	7 years ago
Jenkins2	567e306f8e	Merge "main/cdr.c: Alleviate CDR deadlock" into 13	7 years ago
Matthew Fredrickson	33f4716d13	main/cdr.c: Alleviate CDR deadlock There is a rare case (do to the infrequent timing involved) where CDR submission threads in batch mode can deadlock with a currently running CDR batch process. This patch should remove the need for holding the lock in the scheduler and should clean a few code paths up that inconsistently submitted new work to the CDR batch processor. ASTERISK-27909 Change-Id: I6333e865db7c593c102c2fd948cecdb96481974d Reported-by: Denis Lebedev	7 years ago
Richard Mudgett	d0e4cbfc51	AMI SendText action: Fix to use correct thread to send the text. The AMI action was directly sending the text to the channel driver. However, this makes two threads attempt to handle media and runs afowl of CHECK_BLOCKING. * Queue a read action to make the channel's media handling thread actually send the text message. This changes the AMI actions success/fail response to just mean the text was queued to be sent not that the text actually got sent. The channel driver may not even support sending text messages. ASTERISK-27943 Change-Id: I9dce343d8fa634ba5a416a1326d8a6340f98c379	7 years ago
Jenkins2	a5754e7904	Merge "res_pjsip_messaging: Allow application/* for in-dialog MESSAGEs" into 13	7 years ago
George Joseph	6087c1e575	res_pjsip_messaging: Allow application/* for in-dialog MESSAGEs In addition to text/* content types, incoming_in_dialog_request now accepts application/* content types. Also fixed a length issue when copying the body text. It was one character short. ASTERISK-27942 Change-Id: I4e54d8cc6158dc47eb8fdd6ba0108c6fd53f2818	7 years ago
Alexander Traud	5e9230b528	uuid: Enable UUID in Solaris 11. ASTERISK-27933 Reported by: bautsche Change-Id: I9b8362824efbfb2a16981e46e85f7c8322908c49	7 years ago
Joshua Colp	dca83e2aa2	Merge "utils: Avoid an unused variable in Solaris 11." into 13	7 years ago
George Joseph	498e775a4a	Merge changes from topic 'ASTERISK-27625' into 13 * changes: channel.c: Make CHECK_BLOCKING() save thread LWP id for messages. channel.c: Fix usage of CHECK_BLOCKING() autoservice: Don't start channel autoservice if the thread is a user interface.	7 years ago
George Joseph	aedbf5ba58	Merge "ARI POST DTMF: Make not compete with channel's media thread." into 13	7 years ago
George Joseph	4228dc7b4f	Merge "AMI PlayDTMF Action: Make not compete with channel's media thread." into 13	7 years ago
Alexander Traud	a0445c7a3e	utils: Avoid an unused variable in Solaris 11. With ./configure --enable-dev-mode[=noisy], the build fails because every warning gets an error. Therefore, Asterisk has to be free of warnings and this variable must go. Change-Id: I63dd2bc4833b9bdb04602f83422d16caf289d46a	7 years ago
Kevin Harwell	e7ffbbd40e	Merge "Fix some doxygen and curly placement." into 13	7 years ago
Jenkins2	8cc080a95c	Merge "Dialplan functions: Fix some channel autoservice misuse." into 13	7 years ago
Richard Mudgett	f878de44af	channel.c: Make CHECK_BLOCKING() save thread LWP id for messages. * Removed an unnecessary call to ast_channel_blocker_set() in __ast_read(). ASTERISK-27625 Change-Id: I342168b999984666fb869cd519fe779583a73834	7 years ago
Richard Mudgett	99f439dc01	ARI POST DTMF: Make not compete with channel's media thread. There can be one and only one thread handling a channel's media at a time. Otherwise, we don't know which thread is going to handle the media frames. ASTERISK-27625 Change-Id: I4d6a2fe7386ea447ee199003bf8ad681cb30454e	7 years ago
Richard Mudgett	6a1626c265	AMI PlayDTMF Action: Make not compete with channel's media thread. There can be one and only one thread handling a channel's media at a time. Otherwise, we don't know which thread is going to handle the media frames. ASTERISK-27625 Change-Id: Ia341f1a6f4d54f2022261abec9021fe5b2eb4905	7 years ago
Richard Mudgett	1abcc41fff	channel.c: Fix usage of CHECK_BLOCKING() The CHECK_BLOCKING() macro is used to indicate if a channel's handling thread is about to do a blocking operation (poll, read, or write) of media. A few operations such as ast_queue_frame(), soft hangup, and masquerades use the indication to wake up the blocked thread to reevaluate what is going on. ASTERISK-27625 Change-Id: I4dfc33e01e60627d962efa29d0a4244cf151a84d	7 years ago
Richard Mudgett	5d34ca5b33	autoservice: Don't start channel autoservice if the thread is a user interface. Executing dialplan functions from either AMI or ARI by getting a variable could place the channel into autoservice. However, these user interface threads do not handle the channel's media so we wind up with two threads attempting to handle the media. There can be one and only one thread handling a channel's media at a time. Otherwise, we don't know which thread is going to handle the media frames. ASTERISK-27625 Change-Id: If2dc94ce15ddabf923ed1e2a65ea0ef56e013e49	7 years ago
Richard Mudgett	a6edbc9be1	Dialplan functions: Fix some channel autoservice misuse. * Fix off nominal paths leaving the channel in autoservice. * Remove unnecessary start/stop channel autoservice. * Fix channel locking around a channel datastore search. Change-Id: I7ff2e42388064fe3149034ecae57604040b8b540	7 years ago
Richard Mudgett	7b30158147	Fix some doxygen and curly placement. Change-Id: I9a784a7c804120a8fa826c2a4cb9957e4b0b2fc8	7 years ago
Richard Mudgett	f94a310ca0	channel: Fix some more unprotected channel flag setting. Change-Id: I34c3b1201b1de539945bcfdcb264fff30332d48c	7 years ago
Joshua Colp	b5a186d723	Merge "bridge_channel.c: Fix Deadlock when using Local channels and fax gateway" into 13	8 years ago
George Joseph	8dbd3d2b05	Merge "tcptls: Allow OpenSSL configured with no-dh." into 13	8 years ago
George Joseph	a938f49bc5	Merge "tcptls.h: Repair ./configure --with-ssl=PATH." into 13	8 years ago
George Joseph	93a85150e1	Merge "tcptls: Allow OpenSSL 1.1.x configured with enable-ssl3-method no-deprecated." into 13	8 years ago
George Joseph	db2413b446	app_sendtext: Allow content types other than text/plain There was no real reason to limit the conteny type to text/plain other than that's what it was limited to before. Now any text/* content type will be allowed for channel drivers that don't support enhanced messaging and any type will be allowed for channel drivers that do support enhanced messaging. Change-Id: I94a90cfee98b4bc8e22aa5c0b6afb7b862f979d9	8 years ago
Pirmin Walthert	8b67e2bd14	bridge_channel.c: Fix Deadlock when using Local channels and fax gateway ast_indicate is invoked with the bridge locked. As ast_indicate locks the other end of the bridge as well this can lead to a deadlock in some situations. (Especially when a different thread does the same in the reverse order). This patch calls ast_indicate after unlocking the bridge which fixes the deadlock. Calling ast_indicate with these parameters without locking the bridge should be safe as this is done at different places without a bridge lock. ASTERISK-27094 #close Reported-by: David Brillert Change-Id: I5f86c1e2ce75b9929a36ab589b18c450e62ea35f	8 years ago
Joshua Colp	369e611ac0	Merge "libasteriskssl: Allow OpenSSL 1.0.2 configured with no-deprecated." into 13	8 years ago
Alexander Traud	8c78337479	tcptls.h: Repair ./configure --with-ssl=PATH. asterisk/tcptls.h was included (explicitly, implicitly, or transitively). Those inclusions got replaced by forward declarations. As side effect, the inclusions got completed. ASTERISK-27878 Change-Id: I9d102728e30336d6522e5e4ae9e964013a0835f7	8 years ago
Alexander Traud	6833c763c7	tcptls: Allow OpenSSL configured with no-dh. Additionally, this change allows auto-negotiation of the elliptic curve/group for servers, not only with OpenSSL 1.0.2 but also with OpenSSL 1.1.0 and newer. This enables X25519 (since OpenSSL 1.1.0) and X448 (since OpenSSL 1.1.1) as a side-effect. ASTERISK-27876 Change-Id: I62c2aba4a630aefc231b71f646207e8c027d9497	8 years ago
Alexander Traud	204cc25a27	tcptls: Allow OpenSSL 1.1.x configured with enable-ssl3-method no-deprecated. ASTERISK-27874 Change-Id: Ica65113511c7a1c13f7988e7d9e7d9e7f3f620dd	8 years ago
Joshua Colp	bb33dafa8f	Merge "tcptls: Repair ./configure --with-ssl=PATH." into 13	8 years ago
Joshua Colp	27a8189b0c	Merge "channel.c: Fix off nominal channel allocation failure path." into 13	8 years ago
Richard Mudgett	90a075221b	channel.c: Fix off nominal channel allocation failure path. __ast_channel_alloc_ap() had a failure exit path that hadn't setup the fd descriptors to -1 yet. The destructor would then attempt to close these fd's that had never been opened. Change-Id: Icf21093f36c60781e8cf6ee9d586536302af33e3	8 years ago
Alexei Gradinari	d6145087cf	config.c: Fix successful DELETE treated as failure The config engine destroy_func callback function returns the number of rows deleted or -1 on error. But the function ast_destroy_realtime_fields treated non-zero return values as error. ASTERISK-27863 Change-Id: Ied02b38e8196cb03043e609a0679feebd288d17b	8 years ago
Alexander Traud	ec40bd945c	libasteriskssl: Allow OpenSSL 1.0.2 configured with no-deprecated. Use CRYPTO_set_id_callback(.) only with OpenSSL 0.9.8 and older. ASTERISK-27867 Change-Id: Iadd58d5bf6f538eb224203970a4e88e26f259655	8 years ago
Alexander Traud	b6234f9577	tcptls: Repair ./configure --with-ssl=PATH. SSL_OP_NO_TLSv1_1 and SSL_OP_NO_TLSv1_2 got discovered without honoring a PATH. ASTERISK-27865 Change-Id: I8cd358eed7411726d08fa7b01691bef122fbeb71	8 years ago
Jenkins2	0afe108dd6	Merge "cli: Display correct unit for HTTP timeout in "manager show settings"." into 13	8 years ago
Jenkins2	118eef8907	Merge "Fix GCC 8 build issues." into 13	8 years ago
Alexander Traud	308a967470	rtp_engine: Remove the double assigned RTP payload ID of H.263+. Mantis-3709 (Commit `68ff3c3`, Asterisk 1.2) added support for the video format H.263+. For this, the RTP payload ID 103 got assigned statically. Commit `f1aadc8` assigned another payload ID 98 for this format in Asterisk 1.6. Change-Id: I90e35b158487f8f1f8187da6241b54cd3b74e667	8 years ago
Corey Farrell	67212eae87	cli: Display correct unit for HTTP timeout in "manager show settings". HTTP timeout is in seconds, not minutes. ASTERISK-27852 #close Change-Id: Ie6640835cb07307555741f9b559c2eb876d9343e	8 years ago
Corey Farrell	d893e57c90	Fix GCC 8 build issues. This fixes build warnings found by GCC 8. In some cases format truncation is intentional so the warning is just suppressed. ASTERISK-27824 #close Change-Id: I724f146cbddba8b86619d4c4a9931ee877995c84	8 years ago
Jaco Kroon	47548ff485	manager: fix digest auth for ami/http mechanism. Due to a fixed size buffer the digest authentication could be incorrectly calculated if a large URI was provided, causing authentication failure. The buffer is now dynamically allocated to allow any size URI within the normal limits of the HTTP request size. ASTERISK-27841 Change-Id: I660609db13b8f9e5f9567f339dd804f4985d41b3	8 years ago
George Joseph	42abc9c430	Merge "BuildSystem: Add DragonFly BSD." into 13	8 years ago
George Joseph	0a9c7443bd	Merge "translate: generic plc not filled in after translation" into 13	8 years ago
George Joseph	c5d19565fe	Merge "bridge_softmix: Forward TEXT frames" into 13	8 years ago
Kevin Harwell	63c68d023c	translate: generic plc not filled in after translation If during translation a codec could not handle a given frame the translation core would return NULL, thus not passing along the "missing" frame. Due to this there was no frame to apply generic plc to, thus rendering it useless. This patch makes it so the translation core produces an interpolated slin frame in the cases where an attempt was made to translate to slin, but failed. This interpolated frame is then passed along and can be used by the generic plc algorithms to fill in the frame. ASTERISK-27814 #close Change-Id: I133d084da87adef913bf2ecc9c9240e3eaf4f40a	8 years ago
Alexander Traud	7b219311eb	BuildSystem: Add DragonFly BSD. ASTERISK-27820 Change-Id: I310896143e94d65da1c2be3bb448204a8b86d557	8 years ago
George Joseph	be7d4faed5	bridge_softmix: Forward TEXT frames Core bridging and, more specifically, bridge_softmix have been enhanced to relay received frames of type TEXT or TEXT_DATA to all participants in a softmix bridge. res_pjsip_messaging and chan_pjsip have been enhanced to take advantage of this so when res_pjsip_messaging receives an in-dialog MESSAGE message from a user in a conference call, it's relayed to all other participants in the call. res_pjsip_messaging already queues TEXT frames to the channel when it receives an in-dialog MESSAGE from an endpoint and chan_pjsip will send an MESSAGE when it gets a TEXT frame. On a normal point-to-point call, the frames are forwarded between the two correctly. bridge_softmix was not though so messages weren't getting forwarded to conference bridge participants. Even if they were, the bridging code had no way to tell the participants who sent the message so it would look like it came from the bridge itself. * The TEXT frame type doesn't allow storage of any meta data, such as sender, on the frame so a new TEXT_DATA frame type was added that uses the new ast_msg_data structure as its payload. A channel driver can queue a frame of that type when it receives a message from outside. A channel driver can use it for sending messages by implementing the new send_text_data channel tech callback and setting the new AST_CHAN_TP_SEND_TEXT_DATA flag in its tech properties. If set, the bridging/channel core will use it instead of the original send_text callback and it will get the ast_msg_data structure. Channel drivers aren't required to implement this. Even if a TEXT_DATA enabled driver uses it for incoming messages, an outgoing channel driver that doesn't will still have it's send_text callback called with only the message text just as before. * res_pjsip_messaging now creates a TEXT_DATA frame for incoming in-dialog messages and sets the "from" to the display name in the "From" header, or if that's empty, the caller id name from the channel. This allows the chat client user to set a friendly name for the chat. * bridge_softmix now forwards TEXT and TEXT_DATA frames to all participants (except the sender). * A new function "ast_sendtext_data" was added to channel which takes an ast_msg_data structure and calls a channel's send_text_data callback, or if that's not defined, the original send_text callback. * bridge_channel now calls ast_sendtext_data for TEXT_DATA frame types and ast_sendtext for TEXT frame types. * chan_pjsip now uses the "from" name in the ast_msg_data structure (if it exists) to set the "From" header display name on outgoing text messages. Change-Id: Idacf5900bfd5f22ab8cd235aa56dfad090d18489	8 years ago

1 2 3 4 5 ...

5835 Commits (947d024539d81689ae48013cb4d32b9bea83123c)