This commit breaks out some logic from pbx.c into a simple API. The hint
processing code had logic for taking the state from multiple devices and
turning that into the state for a single extension. So, I broke this out
and made an API that lets you take multiple device states and determine
the aggregate device state. I needed this for some core device state changes
to support distributed device state.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@121501 65c4cc65-6c06-0410-ace0-fbb531ad65f3
DUNDi uses a concept called the Entity ID for unique server identifiers. I have
pulled out the handling of EIDs and made it something available to all of Asterisk.
There is now a global Entity ID that can be used for other purposes as well, such
as code providing distributed device state, which is why I did this. The global
Entity ID is set automatically, just like it was done in DUNDi, but it can also be
set in asterisk.conf. DUNDi will now use this global EID unless one is specified
in dundi.conf.
The current EID for the system can be seen in the "core show settings" CLI command.
It is also available in the dialplan via the ENTITYID variable.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@121439 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the checks for the CLM and EVT services from the SAForum AIS. I'm going to work
on merging in changes from this branch in pieces.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@121403 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and normal deviations. Currently this is implemented for chan_sip, but could be added to the func_channel_read callbacks for the CHANNEL function
for any channel that uses RTP.
(closes issue #10590)
Reported by: gasparz
Patches:
chan_sip_c.diff uploaded by gasparz (license 219)
rtp_c.diff uploaded by gasparz (license 219)
rtp_h.diff uploaded by gasparz (license 219)
audioqos-trunk.diff uploaded by snuffy (license 35)
rtpqos-trunk-r119891.diff uploaded by sergee (license 138)
Tested by: jsmith, gasparz, snuffy, marsosa, chappell, sergee
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@120635 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and off for new installations. This includes the translation from pipes to commas
for pbx_realtime and the EXEC command for AGI, as well as the change to the Set
application not to support multiple variables at once.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@120171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
hold tracking information for mutexes. Now, the "core show locks" output
will output information about who is holding a rwlock when a thread is
waiting on it.
(closes issue #11279)
Reported by: ys
Patches:
trunk_lock_utils.v8.diff uploaded by ys (license 281)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@120064 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a deadlock is detected, then the typical lock information will be
printed along with a backtrace of the stack for the offending threads.
Use of this requires compiling with DETECT_DEADLOCKS and having glibc
installed.
Furthermore, issuing the "core show locks" CLI command will print the
normal lock information as well as a backtraces for each lock. This
requires that DEBUG_THREADS is enabled and that glibc is installed.
All the backtrace features may be disabled by running the configure
script with --without-execinfo as an argument
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@118173 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- make data member of the ast_frame struct a named union instead of a void
Recently the ast_queue_hangup function got a new parameter, the hangupcause
Feedback came in that this is no good and that instead a new function should be created.
This I did.
The hangupcause was stored in the seqno member of the ast_frame struct. This is not very
elegant, and since there's already a data member that one should be used.
Problem is, this member was a void *.
Now it's a named union so it can hold a pointer, an uint32 and there's a padding in case someone
wants to store another type in there in the future.
This commit is so massive, because all ast_frame.data uses have to be
altered to ast_frame.data.data
Thanks russellb and kpfleming for the feedback.
(closes issue #12674)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Until this change, all verbose messages in Asterisk's log files reported logger.c
as the source of the message.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117693 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r116088 | mmichelson | 2008-05-13 18:47:49 -0500 (Tue, 13 May 2008) | 12 lines
A change to the way channel locks are handled when DEBUG_CHANNEL_LOCKS is defined.
After debugging a deadlock, it was noticed that when DEBUG_CHANNEL_LOCKS
is enabled in menuselect, the actual origin of channel locks is obscured
by the fact that all channel locks appear to happen in the function
ast_channel_lock(). This code change redefines ast_channel_lock to be a
macro which maps to __ast_channel_lock(), which then relays the proper
file name, line number, and function name information to the core lock
functions so that this information will be displayed in the case that
there is some sort of locking error or core show locks is issued.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@116089 65c4cc65-6c06-0410-ace0-fbb531ad65f3
marked "urgent" are considered to be higher priority than other messages
and so they will be played before any other messages in a user's mailbox.
There are two ways to leave an urgent message.
1. send the 'U' option to VoiceMail().
2. Set review=yes in voicemail.conf. This will give instructions for
a caller to mark a message as urgent after the message has been recorded.
I have tested that this works correctly with file and ODBC storage, and James
Rothenberger (who wrote initial support for this feature) has tested its use
with IMAP storage.
(closes issue #11817)
Reported by: jaroth
Based on branch http://svn.digium.com/svn/asterisk/team/jrothenberger/asterisk-urgent
Tested by: putnopvut, jaroth
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115588 65c4cc65-6c06-0410-ace0-fbb531ad65f3
new paramater. The new options for ENUM* functions include 'u', 's', 'i', and 'd' which return the full uri, trigger isn specific rewriting, look
for branches into an infrastructure enum tree, or do a direct dns lookup of a number respectively. The new paramater for TXCIDNAME adds a
zone-suffix argument for looking up caller id's in DNS that aren't e164.arpa.
This patch is based on the original code from otmar, modified by snuffy, and tested by jtodd, me, and others.
(closes issue #8089)
Reported by: otmar
Patches:
20080508_bug8089-1.diff
- original code by otmar (license 480),
- revised by snuffy (license 35)
Tested by: oej, otmar, jtodd, Corydon76, snuffy, alexnikolov, bbryant
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115584 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A task wraps a callback function pointer and a data pointer and is managed internal to the taskprocessor subsystem. The callback function is responsible for releasing task data.
Taskprocessor API
* ast_taskprocessor_get(..) - returns a reference to a taskprocessor
* ast_taskprocessor_unreference(..) - releases reference to a taskprocessor
* ast_taskprocessor_push(..) - push a task into a taskprocessor queue
Check doxygen for more details
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r115196 | mmichelson | 2008-05-02 09:28:19 -0500 (Fri, 02 May 2008) | 6 lines
Clarify a comment that was, well, just wrong. It turns out that
ignoring the way that macros expand. Instead, I have clarified in the
comment why the macro will work even if the scheduler id for the
task to be deleted changes during the execution of the macro.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115197 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and denoising to a channel, AGC() and DENOISE(). Also included, is a change
to the audiohook API to add a new function (ast_audiohook_remove) that can
remove an audiohook from a channel before it is detached.
This code is based on a contribution from Switchvox.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114926 65c4cc65-6c06-0410-ace0-fbb531ad65f3
party to be spoken instead of the channel name or number.
This was accomplished by adding a new function pointer to point to a function in app_voicemail
which retrieves the name file and plays it. This makes for an easy way that applications may play
a user's name should it be necessary. app_directory, in particular, can be simplified greatly by
this change.
This change comes as a suggestion from Switchvox, which already has this feature. AST-23
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114813 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114591 | russell | 2008-04-23 12:55:31 -0500 (Wed, 23 Apr 2008) | 5 lines
Store the manager session ID explicitly as 4 byte ID instead of a ulong. The
mansession_id cookie is coded to be limited to 8 characters of hex, and this
could break logins from 64-bit machines in some cases.
(inspired by AST-20)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114592 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes a bug that was thought to be fixed already.
app_voicemail, if using IMAP_STORAGE, has a problem because
the IMAP header files include syslog.h, which define LOG_WARNING
and LOG_DEBUG to be different than what Asterisk uses for those
same macros. This was "fixed" in the past by including all the
IMAP header files prior to including asterisk.h. This fix worked...
unless you were to try to compile with MALLOC_DEBUG. MALLOC_DEBUG
prepends the inclusion of astmm.h to every file, which means that no
matter what order the includes are in in app_voicemail, the unexpected
values for LOG_WARNING and LOG_DEBUG will be in place.
The action taken for this fix was to define AST_LOG_* macros in addition
to the LOG_* macros already defined. These new macros are used in app_voicemail.c,
logger.h, and astobj.h right now, and their use will be encouraged in the future.
In consideration of those who have written third-party modules which use
the LOG_* macros, these will NOT be removed from the source, however future use
of these macros is discouraged.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114577 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: oej
Tested by: jpeeler
This patch implements multiple parking lots for parked calls. The default parkinglot is used by default, however setting the channel variable PARKINGLOT in the dialplan will allow use of any other configured parkinglot. See configs/features.conf.sample for more details on setting up another non-default parkinglot. Also, one can (currently) set the default parkinglot to use in the driver configuration file via the parkinglot option.
Patch initially written by oej, brought up to date and finalized by mvanbaak, and then stabilized and converted to astobj2 by me.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114487 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114207 | mmichelson | 2008-04-17 11:28:03 -0500 (Thu, 17 Apr 2008) | 12 lines
It was possible for a reference to a frame which was part of a freed DSP to still be
referenced, leading to memory corruption and eventual crashes. This code change ensures
that the dsp is freed when we are finished with the frame. This change is very similar
to a change Russell made with translators back a month or so ago.
(closes issue #11999)
Reported by: destiny6628
Patches:
11999.patch uploaded by putnopvut (license 60)
Tested by: destiny6628, victoryure
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114208 65c4cc65-6c06-0410-ace0-fbb531ad65f3
for the string to be copied into. This resulted in parse_request reading invalid
memory beyond the end of the string, and in some cases led to crashes. Thanks
to falves11 for providing the valgrind output which led to the closure of this issue.
(closes issue #12284)
Reported by: falves11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@111662 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r111341 | murf | 2008-03-26 21:21:05 -0600 (Wed, 26 Mar 2008) | 15 lines
(closes issue #12302)
Reported by: pj
Tested by: murf
These changes will set a channel variable ~~EXTEN~~ just before generating code
for a switch, with the value of ${EXTEN}. The exten is marked as having a switch,
and ever after that, till the end of the exten, we substitute any ${EXTEN}
with ${~~EXTEN~~} instead in application arguments; (and the ${EXTEN: also).
The reason for this, is that because switches are coded using
separate extensions to provide pattern matching, and
jumping to/from these switch extensions messes up the ${EXTEN} value,
which blows the minds of users.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@111360 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Per comments from dimas:
1. The code now generates DTMF_BEGIN frames in addition to DTMF_END ones.
2. "quelching" rewritten - now each detector (MF/DTMF/generic tone) may mark fragment of a frame for suppression (squelching, muting) with a call to mute_fragment. Actual muting happens only once at the very end of ast_dsp_process where all marked fragments are zeroed. This way every detector sees original data in the frame without any piece of a frame being zeroed by a detector which was run before.
3. DTMF detector tries to "mute" one block before and one block after the block where actual tone was detected. Muting of previois block is something new for this patch. Obviously this operation is not always possible - if current frame does not contain data for previous block - it is too late. But at least we make our best.
Muting of next block was already done by the old code but it only affects part of the next block which is in the frame being processed. New code keeps this information in state structures so it will mute proper number of samples in the next frame(s) too.
4. Removed ast_dsp_digitdetect and ast_dsp_getdigits APIs because these are not used.
5. DSP API extended a bit - ast_dsp_was_muted() function added which returns true if DSP code was muting any fragment in the last frame. chan_zap uses this function to decide it needs to turn on confmute on the channel.
This is to replace AST_FRAME_DTMF 'm'/'u' (mute/unmute) functionality.
(closes issue #11968)
Reported by: dimas
Patches:
v2-11968-dsp.patch uploaded by dimas (license 88)
v4-11968-zap.patch uploaded by dimas (license 88)
Tested by: dimas, qwell
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@111022 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r110628 | file | 2008-03-25 11:37:35 -0300 (Tue, 25 Mar 2008) | 4 lines
Add an option (transmit_silence) which transmits silence during both Record() and DTMF generation. The reason this is an option is that in order to transmit silence we have to setup a translation path. This may not be needed/wanted in all cases.
(closes issue #10058)
Reported by: tracinet
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110629 65c4cc65-6c06-0410-ace0-fbb531ad65f3
actual problems, per se. I also added format attributes to any printf wrapper functions I found that didn't have them. -Wsecurity and -Wmissing-format-attribute added to --enable-dev-mode.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109447 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r109309 | murf | 2008-03-18 00:37:15 -0600 (Tue, 18 Mar 2008) | 17 lines
(closes issue #11903)
Reported by: atis
Many thanks to atis for spotting this problem and reporting it.
The fix was to straighten out how items are placed on and removed
from the file stack. Regressions as well as the provided test case
helped to straighten out all code paths. valgrind was used to make
sure all memory allocated was freed.
Sorry for not solving this earlier. I got distracted.
Added the ntest23 regression test, which is mainly a copy of ntest22,
but with a few juicy errors thrown in, to replicate the kind of
error that atis spotted.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109357 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This does introduce a dependency on the GMime library for handling HTTP POSTs, but it is available in most distros.
If the library is present, then the compile flag for ENABLE_UPLOADS is enabled by default in menuselect.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109229 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: mvanbaak
Tested by: murf, mvanbaak
Due to a bug that occurred when merge_contexts_and_delete scanned the "old" or existing contexts, and found a context
that doesn't exist in the new set, yet owned by a different registrar. The context is created in the new set, with the
old registrar, and and all the priorities and extens that have a different registrar are copied into it. But, not the
includes, ignorepats, and switches. I added code to do this immediately after the context is created.
This still leaves a logical hole in the code. If you define a context in two places, (eg. in extensions.conf and also
in extensions.ael), and they both have includes, but different in composition, no new context will be generated, and
therefore the 'old' includes, switches, and ignorepats will not be copied. I'd have added code to simply add any non-duplicates
into the 'new' context that had a different registrar, but there is one big complication: includes, and switches are definitely
order dependent. (ignorepats I'm not sure about). And we'll have to develop some sort of policy about how we
merge order dependent lists, especially if the intersection of the two sets is empty. (in other words, they do not have any
elements in common). Do the new go first, or the old? I've elected to punt this issue until a user complains. Hopefully,
this is pretty rare thing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109169 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r108583 | russell | 2008-03-13 16:38:16 -0500 (Thu, 13 Mar 2008) | 11 lines
Fix another issue that was causing crashes in chanspy. This introduces a new
datastore callback, called chan_fixup(). The concept is exactly like the
fixup callback that is used in the channel technology interface. This callback
gets called when the owning channel changes due to a masquerade. Before this
was introduced, if a masquerade happened on a channel being spyed on, the
channel pointer in the datastore became invalid.
(closes issue #12187)
(reported by, and lots of testing from atis)
(props to file for the help with ideas)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108584 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r108227 | mmichelson | 2008-03-12 16:16:28 -0500 (Wed, 12 Mar 2008) | 12 lines
Added a large comment before the AST_SCHED_DEL macro to explain its purpose as well as when
it is appropriate and when it is not appropriate to use it.
I also removed the part of the debug message that mentions that this is probably a bug because
there are some perfectly legitimate places where ast_sched_del may fail to delete an entry (e.g.
when the scheduler callback manually reschedules with a new id instead of returning non-zero to
tell the scheduler to reschedule with the same idea). I also raised the debug level of the debug
message in AST_SCHED_DEL since it seems like it could come up quite frequently since the macro
is probably being used in several places where it shouldn't be. Also removed the redundant line,
file, and function information since that is provided by ast_log.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108238 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r108083 | file | 2008-03-12 15:26:37 -0300 (Wed, 12 Mar 2008) | 4 lines
Add a trigger mode that triggers on both read and write. The actual function that returns the combined audio frame though will wait until both sides have fed in audio, or until one side stops (such as the case when you call Wait).
(closes issue #11945)
Reported by: xheliox
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108084 65c4cc65-6c06-0410-ace0-fbb531ad65f3
caching would not work properly for users.conf and any other file read from
more than one place. I needed to add the filename which requested the config
file to get it to work properly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@107791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: rizzo
Tested by: murf
Proposal of the changes to be made, and then an announcement of how they were accomplished:
http://lists.digium.com/pipermail/asterisk-dev/2008-February/032065.html
and:
http://lists.digium.com/pipermail/asterisk-dev/2008-March/032124.html
Here is a recap, file by file, of what I have done:
pbx/pbx_config.c
pbx/pbx_ael.c
All funcs that were passed a ptr to the context list, now will ALSO be passed a hashtab ptr to the same set.
Why? because (for the time being), the dialplan is stored in both, to facilitate a quick, low-cost move to
hash-tables to speed up dialplan processing. If it was deemed necessary to pass the context LIST, well, it
is just as necessary to have the TABLE available. This is because the list/table in question might not be
the global one, but temporary ones we would use to stage the dialplan on, and then swap into the global
position when things are ready.
We now have one external function for apps to use, "ast_context_find_or_create()" instead of the pre-existing
"find" and "create", as all existing usages used both in tandem anyway.
pbx_config, and pbx_ael, will stage the reloaded dialplan into local lists and tables, and
then call merge_contexts_and_delete, which will merge (now) existing contexts and
priorities from other registrars into this local set by copying them. Then, merge_contexts_and_delete will
lock down the contexts, swap the lists and tables, and unlock (real quick), and then
destroy the old dialplan.
chan_sip.c
chan_iax.c
chan_skinny.c
All the channel drivers that would add regcontexts now use the ast_context_find_or_create now.
chan_sip also includes a small fix to get rid of warnings about removing priorities that never got entered.
apps/app_meetme.c
apps/app_dial.c
apps/app_queue.c
All the apps that added a context/exten/priority were also modified to use ast_context_find_or_create instead.
include/asterisk/pbx.h
ast_context_create() is removed. Find_or_create_ is the new method.
ast_context_find_or_create() interface gets the hashtab added.
ast_merge_contexts_and_delete() gets the local hashtab arg added.
ast_wrlock_contexts_version() is added so you can detect if someone else got a writelock between your readlocking and writelocking.
ast_hashtab_compare_contexts was made public for use in pbx_config/pbx_ael
ast_hashtab_hash_contexts was in like fashion make public.
include/asterisk/pval.h
ast_compile_ael2() interface changed to include the local hashtab table ptr.
main/features.c
For the sake of the parking context, we use ast_context_find_or_create().
main/pbx.c
I changed all the "tree" names to "table" instead. That's because the original
implementation was based on binary trees. (had a free library). Then I moved
to hashtabs. Now, the names move forward too.
refcount field added to contexts, so you can keep track of how many modules
wanted this context to exist.
Some log messages that are warnings were inflated from LOG_NOTICE to LOG_WARNING.
Added some calls to ast_verb(3,...) for debug messages
Lots of little mods to ast_context_remove_extension2, which is now excersized in ways
it was not previously; one definite bug fixed.
find_or_create was upgraded to handle both local lists/tables as well as the globals.
context_merge() was added to do the per-context merging of the old/present contexts/extens/prios into the new/proposed local list/tables
ast_merge_contexts_and_delete() was heavily modified.
ast_add_extension2() was also upgraded to handle changes.
the context_destroy() code was re-engineered to handle the new way of doing things,
by exten/prio instead of by context.
res/ael/pval.c
res/ael/ael.tab.c
res/ael/ael.tab.h
res/ael/ael.y
res/ael/ael_lex.c
res/ael/ael.flex
utils/ael_main.c
utils/extconf.c
utils/conf2ael.c
utils/Makefile
Had to change the interface to ast_compile_ael2(), to include the hashtab ptr.
This ended up involving several external apps. The main gotcha was I had to
include lock.h and hashtab.h in several places.
As a side note, I tested this stuff pretty thoroughly, I replicated the problems
originally reported by Luigi, and made triply sure that reloads worked, and everything
worked thru "stop gracefully". I found a and fixed a few bugs as I was merging into
trunk, that did not appear in my tests of bug6002.
How's this for verbose commit messages?
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@106757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r106704 | russell | 2008-03-07 11:16:58 -0600 (Fri, 07 Mar 2008) | 8 lines
Change a warning message to a debug message. This is happening quite frequently,
and it is not worth spamming users with these messages unless we are pretty confident
that it should never happen. As it stands today, it _will_ and _does_ happen and
until that gets cleaned up a reasonable amount on the development side, let's not
spam the logs of everyone else.
(closes issue #12154)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@106707 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Russell Bryant
Tilghman Lesher
Brett Bryant
Olle Johansson
Philippe Sultan
Mark Michelson
Michiel van Baak
Matthew Fredrickson
Joshua Colp
Dwayne M. Hubbard
Jason Parker
Jeff Peeler
Steve Murphy
Terry Wilson
Kevin P. Fleming