The escalator works by creating a set of startup commands in cli.conf
that set up logger channels and issue the debug commands for the
subsystems specified. If asterisk is running when it is executed,
the same commands will be issued to the running instance. The original
cli.conf is saved before any changes are made and can be restored by
executing '$prog --reset'.
The log output will be stored in...
$astlogdir/message.$uniqueid
$astlogdir/debug.$uniqueid
$astlogdir/dtmf.$uniqueid
$astlogdir/fax.$uniqueid
$astlogdir/security.$uniqueid
$astlogdir/pjsip_history.$uniqueid
$astlogdir/sip_history.$uniqueid
Some minor tweaks were made to chan_sip, and res_pjsip_history
so their history output could be send to a log channel as packets
are captured.
A minor tweak was also made to manager so events are output to verbose
when "manager set debug on" is issued.
Change-Id: I799f8e5013b86dc5282961b27383d134bf09e543
Issue introduced in b59956a87. In the non-darwin case libastssl/pj
should be versioned. This causes the symbol file for this lib
to not be generated.
Change-Id: Ib07ae8c40252813c488e2c1ac6204fd42816dd4c
When a reading end of the network socket is closed by an AMI manager,
the EPIPE is signaled when writing to our end, resulting in the
spurious log error message
ast_careful_fwrite: fwrite() returned error: Broken pipe
Previously EPIPE was handled in ast_carefulwrite() a few lines above,
but not in this function.
ASTERISK-26753
Change-Id: I6a67335cd6526608bb9b78f796c626b1677664b8
* channel.c:ast_sendtext(): Fix T.140 SendText memory leak.
* format_compatibility.c: T.140 RED and T.140 were swapped.
* res_rtp_asterisk.c:rtp_red_init(): Fix ast_format_t140_red ref leak.
* res_rtp_asterisk.c:rtp_red_init(): Fix data race after starting periodic
scheduled red_write().
* res_rtp_asterisk.c: Some other minor misc tweaks.
Change-Id: Ifa27a2e0f8a966b1cf628607c86fc4374b0b88cb
* make_silence() created a malloced silence slin frame without adding a
slin format ref. When the frame is destroyed it will unref the slin
format that never had a ref added. Memory corruption is expected to
follow.
* Simplified and fixed counting the number of samples in a frame list for
make_silence().
* Eliminated an unnecessary RAII_VAR associated with the make_silence()
frame.
Change-Id: I47de3f9b92635b7f8b4d72309444d6c0aee6f747
* ast_frisolate() could leak frame format refs on allocation
failures.
* Similified code in ast_frisolate() and code used by
ast_frisolate().
Change-Id: I79566d4d36b3d7801bf0c8294fcd3e9a86a2ed6d
The 'ari set debug' command has been enhanced to accept 'all' as an
application name. This allows dumping of all apps even if an app
hasn't registered yet. To accomplish this, a new global_debug global
variable was added to res/stasis/app.c and new APIs were added to
set and query the value.
'ari set debug' now displays requests and responses as well as events.
This required refactoring the existing debug code.
* The implementation for 'ari set debug' was moved from stasis/cli.{c,h}
to ari/cli.{c,h}, and stasis/cli.{c,h} were deleted.
* In order to print the body of incoming requests even if a request
failed, the consumption of the body was moved from the ari stubs
to ast_ari_callback in res_ari.c and the moustache templates were
then regenerated. The body is now passed to ast_ari_invoke and then
on to the handlers. This results in code savings since that template
was inserted multiple times into all the stubs.
An additional change was made to the ao2_str_container implementation
to add partial key searching and a sort function. The existing cli
code assumed it was already there when it wasn't so the tab completion
was never working.
Change-Id: Ief936f747ce47f1fb14035fbe61152cf766406bf
The mechanism used for detecting the maximum log level compiled into the
linked pjproject did not work. The API call simply stores the requested
level into an integer and does no range checking. Asterisk was assuming
that there was range checking and limited the new value to the allowable
range. To get the actual maximum log level compiled into the linked
pjproject we need to get and save off the initial set log level from
pjproject. This is the maximum log level supported.
* Get and save off the initial log level setting before altering it to the
desired level on startup. This has to be done by a macro rather than
calling a core function to avoid incorrectly linking pjproject.
* Split the initial log level warning messages to warn if the linked
pjproject cannot support the requested startup level and if it is too low
to get the pjproject buildopts for "pjproject show buildopts".
* Adjust the CLI "pjproject set log level" to check the saved max log
level and to generate normal output messages instead of a warning message.
ASTERISK-26743 #close
Change-Id: I40aa76653e2a1dece66c3f8734594b4f0471cfb4
It was possible for a frame to be re-inserted into a jitter buffer after it
had been removed from it. A case when this happened was if a frame was read
out of the jitterbuffer, passed to the translation core, and then multiple
frames were returned from said translation core. Upon multiple frames being
returned the first is passed on, but sebsequently "chained" frames are put
back into the read queue. Thus it was possible for a frame to go back into
the jitter buffer where this would cause problems.
This patch adds a flag to frames that are inserted into the channel's read
queue after translation. The abstract jitter buffer code then checks for this
flag and ignores any frames marked as such.
Change-Id: I276c44edc9dcff61e606242f71274265c7779587
The task processor queue reached X scheduled tasks message was originally
intended to get logged only once per task processor to prevent spamming
the log. This is no longer necessary since high and low water thresholds
can better control when the message is logged.
It is beneficial to generate the warning each time a task processor
reaches the high water level because PJSIP stops processing new requests
while any high water alert is active. Without this change you would have
to enable at least debug level 3 logging to know about a repeated alert
trigger.
* Made generate the warning message whenever a task is pushed into the
task processor that triggers the high water alert.
* Appended 'again' to the warning for a repeated high water alert trigger.
Change-Id: Iabf75a004f7edaf1e5e8c323099418e667cac999
Added back in a -g3, and an -O3 when DONT_OPTIMIZE is not set, to
the CFLAGS. Not sure how they went missing.
Also fixed an uninstall problem where we weren't removing the
symlink from libasteriskpj.so.2 to libasteriskpj.so. While I was
there, I fixed it for libasteriskssl as well.
Change-Id: I9e00873b1e9082d05b5549d974534b48a2142556
The latest Release candidate fails to create RTP streams when IPv6
is not available. Due to the changes made in September the ast_sockaddr
structure passed around to create these streams is always of AF_INET6
type, causing failure when used for IPv4. This patch adds a utility
function to check for availability of IPv6 and applies such check
at startup to determine how to create the ast_sockaddr structures.
ASTERISK-26617 #close
Change-Id: I627a4e91795e821111e1cda523f083a40d0e0c3e
Use of the new logging is as simple as issuing the new CLI command or
setting the new pjproject.conf option.
Other options that can affect the logging are how you have the pjproject
log levels mapped to Asterisk log types in pjproject.conf and if you have
configured Asterisk to log the DEBUG type messages. Altering the
pjproject.conf level mapping shouldn't be necessary for most installations
as the default mapping is sensible. Configuring Asterisk to log the DEBUG
message type is standard practice for collecting debug information.
* Added CLI "pjproject set log level" command to dynamically adjust the
maximum pjproject log message level.
* Added CLI "pjproject show log level" command to see the currently set
maximum pjproject log message level.
* Added pjproject.conf startup section "log_level" option to set the
initial maximum pjproject log message level so all messages could be
captured from initialization.
* Set PJ_LOG_MAX_LEVEL to 6 to compile in all defined logging levels into
bundled pjproject. Pjproject will use the currently set run time log
level to determine if a log message is generated just like Asterisk
verbose and debug logging levels.
* In log_forwarder(), made always log enabled and mapped pjproject log
messages. DEBUG mapped log messages are no longer gated by the current
Asterisk debug logging level.
* Removed RAII_VAR() from res_pjproject.c:get_log_level().
ASTERISK-26630 #close
Change-Id: I6dca12979f482ffb0450aaf58db0fe0f6d2e5389
The recent change that made frame deferral into an API had a behavior
change to it. When frame deferral was completed, we would take all of
the deferred frames and queue them all onto the channel in one call to
ast_queue_frame_head(). Before frame deferral was API-ized, places that
performed manual frame deferral would actually take each deferred frame
and queue them onto the channel.
This change in behavior caused the confbridge_recording test to start
failing consistently. Without going too crazily deep into the details,
a channel was getting "stuck" in an ast_safe_sleep(). An AMI redirect
was attempting to break it out of the sleep, but because there were more
frames in the channel read queue than expected, the channel ended up
being unable to break from its sleep loop.
By restoring the behavior of individual frame queuing after deferral,
the test starts passing again.
Note, this points to a potential underlying issue pointing to an
"unbalance" that can occur when queuing multiple frames at once,
and so a follow-up issue is being created to investigate that
possibility.
Change-Id: Ied5dacacda06d343dea751ed5814a03364fe5a7d
OpenSSL 1.1.0 includes some major changes in the interface. See
https://wiki.openssl.org/index.php/1.1_API_Changes .
Status: Right now there are still a few deprecation notes with OpenSSL
1.1.0. But it's a start.
Changes:
* CRYPTO_LOCK is no longer available. Replace it with its value for now.
I don't completely understand what it is used for there.
* Remove several functions from libasteriskssl that seem to no longer be
needed.
* Structures have become opaque and are accesses with accessors.
* ERR_remove_thread_state() no longer needed.
* SSLv2 code now could no longer be used in 1.1.
ASTERISK-26109 #close
Change-Id: I5e29d477d486ca29b6aae0dc2f5dff960c1cb82b
If a TCP/TLS connection was pending (not accepted and not timed out) during
unload of chan_sip, Asterisk would segfault when trying to send a signal to
a thread whose thread ID hadn't been recorded yet. This commit fixes that by
recording the thread ID before calling the blocking connect() syscall.
This was a regression introduced by 776a14386a.
The above wasn't enough to fix the segfault, which was now delayed to the
point where connect() timed out. Therefore, it was necessary to also remove
the SA_RESTART flag from the SIGURG sigaction so that pthread_kill() could be
used to interruput the connect() syscall.
This was a regression introduced by 5d313f51b9.
ASTERISK-26586 #close
Change-Id: I76fd9d47d56e4264e2629bce8ec15fecba673e7b
When retrieving RTCP stats for PJSIP channels, RTT values are unreliable.
RTT calculation is correct, but the data representation isn't. RTT is
represented by a 32-bit fixed-point number with the integer part in the
first 16 bits and the fractional part in the last 16 bits. In order to
get the RTT value, the fractional part is miscalculated, there is an
unnecessary 16 bit shift that causes overflow. Besides this there is
another mistake, when transforming the integer value to the fixed point
fractional part via bitwise operation, that loses precision.
* RTT fractional part is no longer shifted, avoiding overflow.
* RTT fractional part is transformed to its fixed-point value more
precisely.
* Fixed timeval2ntp() and ntp2timeval() second fraction conversions.
* Fixed NTP timestamp report logging. The usec was inexplicably
multiplied by 4096.
ASTERISK-26566 #close
Reported by Hector Royo Concepcion
Change-Id: Ie09bdabfee75afb3f1b8ddfd963e5219ada3b96f
Previously, a TLS server socket would only be restarted upon sip reload if the
bind address had changed. This commit adds checking for changes to TLS
parameters like certificate, ciphers, etc. so they get picked up without
requiring a reload of the entire chan_sip module. This does not affect open
connections in any way, but new connections will use the new TLS parameters.
The changes also apply to HTTP and Manager.
ASTERISK-26604 #close
Change-Id: I169e86cefc6dcd627c915134015a6a1ab1aadbe6
A while back, a master-only change was made to check for librt which
should probably have been cherry-picked to 13 at that time. Sometime
between then and now, part of that change did make it into 13 but it
was incomplete and non-functional. This patch backports the rest
of the librt check and allows the link of libasteriskpj to use the
results.
Change-Id: I1424008fd8c90f389dda53162ec4a340b253a3c1
OpenBSD's 'find' doesn't take the -delete argument so you have to pipe
through 'xargs rm -rf'.
'echo -e' doesn't like \t starting a line. It just prints 't' which
causes the libasteriskpj.exports file to be garbage. They were just
cosmetic so they were removed.
librt doesn't exist so the link of libasteriskpj.so fails. It's not
actually needed for linux anyway so -lrt was removed from the link.
res_rtp_asterisk was failing to load because of an undefined
DTLS_method. '|| defined(LIBRESSL_VERSION_NUMBER)' was added to the #if
so DTLSv1_method is used instead.
ASTERISK-26608
Change-Id: I926ec95b0b69633231e3ad1d6e803b977272c49c
When Opus is negotiated but not loaded, the log is spammed with messages
because the system does not know how to calculate the number of samples in
a frame.
* Suppress the warning by supplying a function that assumes 20ms of
samples in the frame. For pass through support it doesn't really seem to
matter what number of samples is returned anyway.
ASTERISK-26605 #close
Change-Id: Icf2273692f040dc2c45b01e72a790d11092f9e0f
The sending codec is switched to the receiving codec and then
is switched back to the best native codec on EVERY receiving RTP packets.
This is because after call of ast_channel_set_rawwriteformat there is call
of ast_set_write_format which calls set_format which sets rawwriteformat
to the best native format.
This patch adds a new function ast_set_write_format_path which set
specific write path on channel and uses this function to switch
the sending codec.
ASTERISK-26603 #close
Change-Id: I5b7d098f8b254ce8f45546e6c36e5d324737f71d
One of the code paths in __ast_file_read_dirs will only get executed if
the OS doesn't support dirent->d_type OR if the filesystem the
particular file is on doesn't support it. So, while standard Linux
systems support the field, some filesystems like XFS do not. In this
case, we need to call stat() to determine whether the directory entry
is a file or directory so we append the filename to the supplied
directory path and call stat. We forgot to truncate path back to just
the directory afterwards though so we were passing a complete file name
to the callback in the dir_name parameter instead of just the directory
name.
The logic has been re-written to only create a full_path if we need to
call stat() or if we need to descend into another directory.
Change-Id: I54e4228bd8355fad65200c6df3ec4c9c8a98dfba
verification.
This way one X.509 certificate can be used for hosts that
can be reached under multiple DNS names or for multiple hosts.
Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name>
ASTERISK-25063 #close
Change-Id: I13302c80490a0b44c43f1b45376c9bd7b15a538f
In multi-party bridges, Asterisk currently supports two video modes:
* Follow the talker, in which the speaker with the most energy is shown
to all participants but the speaker, and the speaker sees the
previous video source
* Explicitly set video sources, in which all participants see a locked
video source
Prior to this patch, ARI had no ability to manipulate the video source.
This isn't important for two-party bridges, in which Asterisk merely
relays the video between the participants. However, in a multi-party
bridge, it can be advantageous to allow an external application to
manipulate the video source.
This patch provides two new routes to accomplish this:
(1) setVideoSource: POST /bridges/{bridgeId}/videoSource/{channelId}
Sets a video source to an explicit channel
(2) clearVideoSource: DELETE /bridges/{bridgeId}/videoSource
Removes any explicit video source, and sets the video mode to talk
detection
ASTERISK-26595 #close
Change-Id: I98e455d5bffc08ea5e8d6b84ccaf063c714e6621
Libedit 3.1 is not build with unicode on as a default and so the
prototype for the el_gets callback changed from expecting a char buffer
to accepting a wchar buffer. If ast_el_read_char isn't changed,
the cli reads garbage from teh terminal.
Added a configure test for (*el_rfunc_t)(EditLine *, wchar_t *) and
updated ast_el_read_char to use the HAVE_ define to detemrine whether
to use char or wchar.
ASTERISK-26592 #close
Change-Id: I9099b46f68e06d0202ff80e53022a2b68b08871a
This is another case where manual frame deferral can be replaced with
centralized routines instead.
Change-Id: I42cdf205f8f29a7977e599751a57efbaac07c30e
AGI recently was modified to defer important frames. This was because
when AGI was used in a connected line interception routine, the
resulting connected line frame would end up getting discarded by the
AGI.
However, this caused bad behavior in other cases. Specifically, during a
transfer, if someone attempted to manually set the Caller ID on a
channel in an AGI, the deferred connected line frame would end up
overwriting what had been manually set in the AGI.
Since the initial issue was specific to interception routines, this
change removes the manual frame deferral from AGI and instead uses the
new frame deferral API in interception routines.
ASTERISK-26343 #close
Reported by Morton Tryfoss
Change-Id: Iab7d39436d0ee99bfe32ad55ef91e9bd88db4208
There are several places in Asterisk that have duplicated logic
for deferring important frames until later.
This commit adds a couple of API calls to facilitate this automatically.
ast_channel_start_defer_frames(): Future reads of deferrable frames on
this channel will be deferred until later.
ast_channel_stop_defer_frames(): Any frames that have been deferred get
requeued onto the channel.
ASTERISK-26343
Change-Id: I3e1b87bc6796f222442fa6f7d1b6a4706fb33641
When a channel is made the video source, the bridge holds a reference to
it. Whenever the video source changes, that reference is released.
However, a ref leak does occur if the channel leaves the bridge (such as
being hung up) while it is the video source, as the bridge never
releases the ref in such a case.
This patch adds a line to the bridge_channel_internal_join routine such
that, when a channel finishes its time in the bridge, it notifies the
bridge via ast_bridge_remove_video_src that if it is a video source its
reference should be released.
ASTERISK-26555 #close
Change-Id: I3a2f5238a9d2fc49c591f0e65199d782ab0be76a
It's actually quite useful to see the source of a video stream change.
This doesn't happen terribly often, even with talk detection - but when
it does, it's nice to know which channel is now providing your video
stream.
As a verbose 5 level message, it shouldn't be terribly spammy or costly
to have, and is 'lower level' then most other verbose messages that the
bridge system emits.
ASTERISK-26555
Change-Id: Ia1c20ecafa9670171fd38bddcf3beccae47fb15c
The readdir_r function has been deprecated and should no longer be used. This
patch removes the readdir_r dependency (replaced it with readdir) and also moves
the directory search code to a more centralized spot (file.c)
Also removed a strict dependency on the dirent structure's d_type field as it
is not portable. The code now checks to see if the value is available. If so,
it tries to use it, but defaults back to using the stats function if necessary.
Lastly, for most implementations of readdir it *should* be thread-safe to make
concurrent calls to it as long as different directory streams are specified.
glibc falls into this category. However, since it is possible that there exist
some implementations that are not safe, locking has been added for those other
than glibc.
ASTERISK-26412
ASTERISK-26509 #close
Change-Id: Id8f54689b1e2873e82a09d0d0d2faf41964e80ba
The dynamic range (96-127) allows 32 RTP Payload Types. RFC 3551 section 3
allows to reassign other ranges. Consequently, when the dynamic range is
exhausted, you can go for "rtp_pt_dynamic = 35" (or 0) in asterisk.conf. This
enables the range 35-63 (or 0-63) giving room for another 29 (or 64) payload
types.
ASTERISK-26311 #close
Change-Id: I7bc96ab764bc30098a178b841cbf7146f9d64964
(cherry picked from commit 9ac53877f6)
The NewConnectedLine event has been added by commit fe7671f, but the
documentation was missing.
ASTERISK-26537 #close
Change-Id: I7fc331f18caa28492da9303e576f70884ca8c9e6
Every ao2 object contains storage for a private variable data_size,
though the value is never read if AO2_DEBUG is disabled. This change
makes the variable conditional, reducing memory usage.
ASTERISK-26524 #close
Change-Id: If859929e507676ebc58b0f84247a4231e11da07f
main/Makefile includes third-party/pjproject/build.mak but
doesn't set PJDIR beforehand so "include $(PJDIR)/version.mak"
evaluates to "/version.mak". Fix is to set PJDIR in main/Makefile
before the include.
Change-Id: I0f7c67d60209049056fe9c4b041bf0463aa95604
It is only safe to run ast_register_cleanup callbacks when all modules
have been unloaded. Previously these callbacks were run during graceful
shutdown, making it possible to crash during shutdown.
ASTERISK-26513 #close
Change-Id: Ibfa635bb688d1227ec54aa211d90d6bd45052e21
ARI and AMI allow for an explicit channel ID to be specified
when originating channels. Unfortunately, there is nothing in
place to prevent someone from using the same ID for multiple
channels. Further complicating things, adding ID validation to channel
allocation makes it impossible for ARI to discern why channel allocation
failed, resulting in a vague error code being returned.
The fix for this is to institute a new method for channel errors to be
discerned. The method mirrors errno, in that when an error occurs, the
caller can consult the channel errno value to determine what the error
was. This initial iteration of the feature only introduces "unknown" and
"channel ID exists" errors. However, it's possible to add more errors as
needed.
ARI uses this feature to determine why channel allocation failed and can
return a 409 error during origination to show that a channel with the
given ID already exists.
ASTERISK-26421
Change-Id: Ibba7ae68842dab6df0c2e9c45559208bc89d3d06
CDRs form chains. When the root of the chain is destroyed, it then
unreferences the next CDR in the chain. That CDR is destroyed, and it
then unreferences the next CDR in the chain. This repeats until the end
of the chain is reached. While this typically does not cause any sort of
problems, it is possible in strange scenarios for the CDR chain to grow
way longer than expected. In such a scenario, the destruction pattern
can result in a stack overflow.
This patch fixes the problem by switching from a recursive pattern to an
iterative pattern for destruction. When the root CDR is destroyed, it is
responsible for iterating over the rest of the CDRs and unreferencing
each one. Other CDRs in the chain, since they are not the root, will
simply destroy themselves and be done. This causes the stack depth not
to increase.
ASTERISK-26421 #close
Reported by Andrew Nagy
Change-Id: I3ca90c2b8051f3b7ead2e0e43f60d2c18fb204b8
Since Asterisk 1.8, the command "core set debug" on the command-line interface
asks not for a file (.c) but a module name. This change shows modules (.so) on
the auto-completion via a tabulator or the question mark. Now, when you
partially type a module name, TAB or ?, you get the correct candidiates.
ASTERISK-26480
Change-Id: I1213f1dd409bd4ff8de08ad80cb0c73cafb1bae0
ast_set_default_eid was searching for ethX, emX, enoX, ensX and even
pciD#U interface names. While this was a good attempt, it wasn't
inclusive enough to capture interfaces like enp6s0 or ens6d1, etc.
Rather than relying on interface names, we now simply find the first
interface returned by the OS that has a hardware address and that
address isn't all 0x00 or all 0xff. The code IS different for BSD,
Solaris and Linux based on what method is available for enumerating
interfaces.
Tested on:
FreeBSD9
CentOS6
Ubuntu14
Fedora24
I was unable to test on Solaris at this time but the code for Solaris
is used elsewhere at Digium.
Change-Id: Iaa6db87ca78a9a375e47d70e043ae08c1448cb72
Added needed UTF-8 checks before constructing json objects in various
files for strings obtained outside the system. In this case string values
from a channel driver's peer and not from the user setting channel
variables.
* aoc.c: Fixed type mismatch in s_to_json() for time and granularity json
object construction.
ASTERISK-26466
Reported by: Richard Mudgett
Change-Id: Iac2d867fa598daba5c5dbc619b5464625a7f2096
* Updated unit test as ast_json_name_number() is now NULL tolerant.
ASTERISK-26466 #close
Reported by: Richard Mudgett
Change-Id: I7d4e14194f8f81f24a1dc34d1b8602c0950265a6
Since the json library does not make the check function public we
recreate/copy the function in our interface module.
ASTERISK-26466
Reported by: Richard Mudgett
Change-Id: I36d3d750b6f5f1a110bc69ea92b435ecdeeb2a99
* In s_to_json() removed unnecessary ast_json_ref() to ast_json_null()
when creating the type json object. The ref is a noop.
Change-Id: I2be8b836876fc2e34a27c161f8b1c53b58a3889a
* Compile __ast_assert_failed unconditionally.
* Use __ast_assert_failed to log messages from log_bad_ao2
* Remove calls to ast_assert(0) that happen after log_bad_ao2 was run.
Change-Id: I48f1af44b2718ad74a421ff75cb6397b924a9751
zuul
George Joseph
Torrey Searle
kkm
Joshua Colp
Richard Mudgett
Kevin Harwell
Guido Falsi
Mark Michelson
Tzafrir Cohen
Michael Kuron
gestoip2
misha
Alexei Gradinari
Maciej Szmigiero
Matt Jordan
Alexander Traud
Etienne Lessard
Corey Farrell
Pascal Cadotte Michaud
snuffy