mirror of https://github.com/asterisk/asterisk
releases/22
releases/23
releases/21
releases/20
master
20
22
23
certified/18.9
certified/20.7
21
18
revert-1477-taskpool-pjsip
releases/21-pre-reorder
releases/20-pre-reorder
releases/22.5
releases/20.15
releases/21.10
releases/18
releases/certified-18.9
releases/certified-20.7
releases/22.4
releases/21.9
releases/20.14
revert-549-master-issue-548
16
19
releases/19
releases/16
20.2
18.17
20.1
19.8
18.16
16.30
20.0
19.7
18.15
16.29
16.19
19.6
18.14
16.28
development/16/python3
development/16/geolocation
19.5
18.13
16.27
19.4
18.12
16.26
19.3
18.11
16.25
certified/16.8
19.2
18.10
16.24
certified/16.3
19.1
18.9
16.23
19.0
18.8
16.22
16.21
18.7
18.6
16.20
18.5
17.9
13.38
17
13
18.4
16.18
18.3
16.17
18.2
16.16
18.1
16.15
jenkinstest-16
18.0
17.8
16.14
13.37
17.7
16.13
13.36
certified/13.21
17.6
16.12
13.35
17.5
16.11
13.34
17.4
16.10
13.33
17.3
16.9
13.32
17.2
16.8
13.31
17.1
16.7
13.30
17.0
16.6
13.29
16.5
15.7
13.28
15
16.4
13.27
16.3
13.26
16.2
13.25
16.1
13.24
16.0
15.6
13.23
14.7
14
certified/13.18
certified/13.13
certified/11.6
11
certified/13.8
certified/13.1
1.8
certified/1.8.28
12
certified/1.8.15
certified/11.2
10-digiumphones
10
certified/1.8.11
certified/1.8.6
1.6.2
1.4
1.6.1
1.6.0
1.2
1.2-netsec
1.0
22.7.0-rc1
23.1.0-rc1
21.12.0-rc1
20.17.0-rc1
23.0.0
22.6.0
21.11.0
20.16.0
21.11.0-rc2
23.0.0-rc2
22.6.0-rc2
20.16.0-rc2
20.15.0
20.15.0-rc1
20.15.0-rc2
20.15.0-rc3
20.15.1
20.15.2
20.16.0-rc1
21.10.0
21.10.0-rc1
21.10.0-rc2
21.10.0-rc3
21.10.1
21.10.2
21.11.0-rc1
22.5.0-rc1
22.5.0-rc2
22.5.0-rc3
22.5.0
22.5.1
22.5.2
22.6.0-rc1
23.0.0-rc1
18.26.4
certified-18.9-cert17
23.0.0-pre1
certified-20.7-cert7
certified-18.9-cert16
18.26.3
certified-20.7-cert6
certified-18.9-cert15
22.4.1
21.9.1
20.14.1
18.26.2
certified-20.7-cert5
certified-18.9-cert14
22.4.0
21.9.0
20.14.0
22.4.0-rc1
21.9.0-rc1
20.14.0-rc1
22.3.0
21.8.0
20.13.0
22.3.0-rc1
21.8.0-rc1
20.13.0-rc1
22.2.0
21.7.0
20.12.0
22.2.0-rc2
21.7.0-rc2
20.12.0-rc2
22.2.0-rc1
21.7.0-rc1
20.12.0-rc1
certified-20.7-cert4
certified-18.9-cert13
22.1.1
21.6.1
20.11.1
18.26.1
22.1.0
21.6.0
20.11.0
18.26.0
22.1.0-rc1
21.6.0-rc1
20.11.0-rc1
18.26.0-rc1
18.25.0
20.10.0
21.5.0
22.0.0
22.0.0-rc2
21.5.0-rc2
20.10.0-rc2
18.25.0-rc2
22.0.0-rc1
21.5.0-rc1
20.10.0-rc1
18.25.0-rc1
certified-20.7-cert3
certified-18.9-cert12
21.4.3
20.9.3
18.24.3
22.0.0-pre1
21.4.2
20.9.2
18.24.2
certified-20.7-cert2
certified-18.9-cert11
21.4.1
20.9.1
18.24.1
21.4.0
20.9.0
18.24.0
certified-20.7-cert1
certified-18.9-cert10
21.4.0-rc1
20.9.0-rc1
18.24.0-rc1
21.3.1
20.8.1
18.23.1
21.3.0
20.8.0
18.23.0
certified-20.7-cert1-rc2
certified-18.9-cert9
20.8.0-rc1
21.3.0-rc1
18.23.0-rc1
certified-20.7-cert1-rc1
certified-20.7-cert1-pre1
21.2.0
20.7.0
18.22.0
certified-18.9-cert8
21.2.0-rc2
20.7.0-rc2
18.22.0-rc2
21.2.0-rc1
20.7.0-rc1
18.22.0-rc1
certified-18.9-cert8-rc2
certified-18.9-cert8-rc1
21.1.0
20.6.0
18.21.0
21.1.0-rc2
20.6.0-rc2
18.21.0-rc2
21.1.0-rc1
20.6.0-rc1
18.21.0-rc1
21.0.2
20.5.2
18.20.2
certified-18.9-cert7
certified-18.9-cert6
21.0.1
20.5.1
18.20.1
21.0.0
20.5.0
18.20.0
21.0.0-rc1
20.5.0-rc1
18.20.0-rc1
21.0.0-pre1
18.19.0
20.4.0
20.4.0-rc2
18.19.0-rc2
20.4.0-rc1
18.19.0-rc1
20.3.1
certified-18.9-cert5
19.8.1
18.18.1
16.30.1
certified-18.9-cert4
20.3.0
18.18.0
20.3.0-rc1
18.18.0-rc1
20.2.1
18.17.1
20.2.0
18.17.0
20.2.0-rc1
18.17.0-rc1
certified/18.9-cert4
20.1.0
19.8.0
18.16.0
16.30.0
20.1.0-rc2
19.8.0-rc2
18.16.0-rc2
16.30.0-rc2
20.1.0-rc1
18.16.0-rc1
19.8.0-rc1
16.30.0-rc1
certified/18.9-cert3
20.0.1
19.7.1
18.15.1
16.29.1
19.7.0
20.0.0
18.15.0
16.29.0
certified/18.9-cert2
20.0.0-rc2
19.7.0-rc2
18.15.0-rc2
16.29.0-rc2
20.0.0-rc1
19.7.0-rc1
18.15.0-rc1
16.29.0-rc1
19.6.0
18.14.0
16.28.0
19.6.0-rc2
18.14.0-rc2
16.28.0-rc2
19.6.0-rc1
18.14.0-rc1
16.28.0-rc1
19.5.0
18.13.0
16.27.0
19.5.0-rc1
18.13.0-rc1
16.27.0-rc1
19.4.1
18.12.1
16.26.1
19.4.0
18.12.0
16.26.0
19.4.0-rc1
18.12.0-rc1
16.26.0-rc1
certified/18.9-cert1
19.3.3
18.11.3
16.25.3
certified/16.8-cert14
19.3.2
18.11.2
16.25.2
19.3.1
18.11.1
16.25.1
19.3.0
18.11.0
16.25.0
19.3.0-rc1
18.11.0-rc1
16.25.0-rc1
certified/16.8-cert13
19.2.1
18.10.1
16.24.1
19.2.0
18.10.0
16.24.0
19.2.0-rc1
18.10.0-rc1
16.24.0-rc1
certified/18.9-cert1-rc1
19.1.0
18.9.0
16.23.0
19.1.0-rc1
18.9.0-rc1
16.23.0-rc1
19.0.0
18.8.0
16.22.0
certified/16.8-cert12
19.0.0-rc1
18.8.0-rc1
16.22.0-rc1
16.21.1
18.7.1
18.7.0
16.21.0
18.7.0-rc3
16.21.0-rc3
18.7.0-rc2
16.21.0-rc2
18.7.0-rc1
16.21.0-rc1
certified/16.8-cert11
18.6.0
16.20.0
18.6.0-rc1
16.20.0-rc1
certified/16.8-cert10
18.5.1
17.9.4
16.19.1
13.38.3
18.5.0
16.19.0
certified/16.8-cert9
18.5.0-rc1
16.19.0-rc1
18.4.0
16.18.0
18.4.0-rc1
16.18.0-rc1
certified/16.8-cert8
18.3.0
16.17.0
18.3.0-rc2
16.17.0-rc2
18.3.0-rc1
16.17.0-rc1
certified/16.8-cert7
18.2.2
17.9.3
16.16.2
certified/16.8-cert6
18.2.1
17.9.2
16.16.1
13.38.2
18.2.0
16.16.0
18.2.0-rc1
16.16.0-rc1
18.1.1
17.9.1
16.15.1
13.38.1
18.1.0
17.9.0
16.15.0
13.38.0
18.1.0-rc1
17.9.0-rc1
16.15.0-rc1
13.38.0-rc1
18.0.1
17.8.1
16.14.1
certified/16.8-cert5
13.37.1
certified/16.8-cert4
certified/16.8-cert4-rc4
18.0.0
17.8.0
16.14.0
13.37.0
18.0.0-rc2
certified/16.8-cert4-rc3
18.0.0-rc1
17.8.0-rc1
16.14.0-rc1
13.37.0-rc1
17.7.0
16.13.0
13.36.0
17.7.0-rc2
16.13.0-rc2
13.36.0-rc2
17.7.0-rc1
16.13.0-rc1
13.36.0-rc1
certified/16.8-cert4-rc2
17.6.0
16.12.0
13.35.0
17.6.0-rc1
16.12.0-rc1
13.35.0-rc1
certified/16.8-cert4-rc1
certified/16.8-cert3
17.5.1
16.11.1
17.5.0
16.11.0
13.34.0
17.5.0-rc3
16.11.0-rc3
13.34.0-rc3
17.5.0-rc2
16.11.0-rc2
13.34.0-rc2
17.5.0-rc1
16.11.0-rc1
13.34.0-rc1
certified/16.8-cert2
17.4.0
16.10.0
13.33.0
certified/16.8-cert1
17.4.0-rc2
16.10.0-rc2
13.33.0-rc2
17.4.0-rc1
16.10.0-rc1
13.33.0-rc1
certified/16.8-cert1-rc5
certified/16.8-cert1-rc4
17.3.0
16.9.0
13.32.0
17.3.0-rc1
16.9.0-rc1
13.32.0-rc1
certified/16.8-cert1-rc3
certified/16.8-cert1-rc2
certified/16.8-cert1-rc1
17.2.0
16.8.0
13.31.0
17.2.0-rc2
16.8.0-rc2
13.31.0-rc2
17.2.0-rc1
16.8.0-rc1
13.31.0-rc1
certified/16.3-cert1
certified/13.21-cert6
17.1.0
16.7.0
13.30.0
17.1.0-rc2
16.7.0-rc2
13.30.0-rc2
17.1.0-rc1
16.7.0-rc1
13.30.0-rc1
certified/13.21-cert5
17.0.1
16.6.2
13.29.2
17.0.0
17.0.0-rc3
16.6.1
13.29.1
16.6.0
13.29.0
16.6.0-rc2
13.29.0-rc2
17.0.0-rc2
16.6.0-rc1
13.29.0-rc1
16.5.1
15.7.4
13.28.1
17.0.0-rc1
16.5.0
13.28.0
16.5.0-rc1
13.28.0-rc1
certified/13.21-cert4
16.4.1
15.7.3
13.27.1
16.4.0
13.27.0
16.4.0-rc1
13.27.0-rc1
16.3.0
13.26.0
16.3.0-rc1
13.26.0-rc1
16.2.1
15.7.2
16.2.0
13.25.0
13.25.0-rc3
16.2.0-rc2
13.25.0-rc2
16.2.0-rc1
13.25.0-rc1
16.1.1
15.7.1
13.24.1
16.1.0
13.24.0
15.7.0
16.1.0-rc1
15.7.0-rc1
13.24.0-rc1
16.0.1
15.6.2
16.0.0
16.0.0-rc3
certified/13.21-cert3
15.6.1
14.7.8
13.23.1
16.0.0-rc2
15.6.0
13.23.0
15.6.0-rc1
13.23.0-rc1
16.0.0-rc1
15.5.0
13.22.0
15.5.0-rc1
13.22.0-rc1
15.4.1
14.7.7
certified/13.21-cert2
certified/13.18-cert4
13.21.1
certified/13.21-cert1
certified/13.21-cert1-rc2
certified/13.21-cert1-rc1
15.4.0
13.21.0
15.4.0-rc2
15.4.0-rc1
13.21.0-rc1
15.3.0
13.20.0
15.3.0-rc2
13.20.0-rc2
15.3.0-rc1
13.20.0-rc1
15.2.2
certified/13.18-cert3
14.7.6
13.19.2
13.19.1
15.2.1
15.2.0
13.19.0
15.2.0-rc2
13.19.0-rc2
certified/13.18-cert2
15.1.5
14.7.5
13.18.5
certified/13.18-cert1
15.2.0-rc1
13.19.0-rc1
certified/13.18-cert1-rc3
certified/13.13-cert9
15.1.4
14.7.4
13.18.4
15.1.3
certified/13.13-cert8
14.7.3
13.18.3
certified/13.18-cert1-rc2
15.1.2
14.7.2
13.18.2
certified/13.18-cert1-rc1
certified/13.13-cert7
15.1.1
14.7.1
13.18.1
15.1.0
14.7.0
13.18.0
15.1.0-rc2
14.7.0-rc2
13.18.0-rc2
15.1.0-rc1
14.7.0-rc1
13.18.0-rc1
15.0.0
certified/13.13-cert6
certified/11.6-cert18
14.6.2
13.17.2
11.25.3
15.0.0-rc1
14.6.1
certified/13.13-cert5
13.17.1
certified/11.6-cert17
11.25.2
15.0.0-beta1
14.6.0
13.17.0
14.6.0-rc1
13.17.0-rc1
14.5.0
13.16.0
14.5.0-rc2
13.16.0-rc2
14.5.0-rc1
13.16.0-rc1
certified/13.13-cert4
14.4.1
13.15.1
14.4.0
13.15.0
14.4.0-rc3
13.15.0-rc3
14.3.1
13.14.1
certified/13.13-cert3
13.15.0-rc2
14.4.0-rc2
14.4.0-rc1
13.15.0-rc1
certified/13.13-cert2
14.3.0
13.14.0
certified/13.13-cert1
14.3.0-rc2
13.14.0-rc2
certified/13.13-cert1-rc4
14.3.0-rc1
13.14.0-rc1
certified/13.13-cert1-rc3
certified/13.13-cert1-rc2
certified/11.6-cert16
certified/13.8-cert4
14.2.1
13.13.1
11.25.1
certified/13.13-cert1-rc1
14.2.0
13.13.0
14.2.0-rc2
13.13.0-rc2
11.25.0
14.2.0-rc1
13.13.0-rc1
11.25.0-rc1
14.1.2
13.12.2
14.1.1
13.12.1
11.24.1
14.1.0
13.12.0
11.24.0
14.1.0-rc1
13.12.0-rc1
11.24.0-rc1
14.0.2
14.0.1
14.0.0
14.0.0-rc2
14.0.0-rc1
13.11.2
certified/11.6-cert15
certified/13.8-cert3
11.23.1
13.11.1
13.11.0
13.11.0-rc2
14.0.0-beta2
certified/11.6-cert14
certified/11.6-cert14-rc2
certified/13.8-cert2
certified/13.8-cert2-rc1
certified/11.6-cert14-rc1
13.11.0-rc1
14.0.0-beta1
11.23.0
13.10.0
certified/13.1-cert8
13.10.0-rc3
certified/13.8-cert1
13.10.0-rc2
11.23.0-rc1
13.10.0-rc1
certified/13.8-cert1-rc3
13.9.1
13.9.0
certified/13.8-cert1-rc2
13.9.0-rc2
certified/13.1-cert7
13.9.0-rc1
certified/13.1-cert6
13.8.2
13.8.1
certified/13.1-cert5
certified/13.8-cert1-rc1
13.8.0
11.22.0
certified/13.1-cert4
certified/11.6-cert13
11.21.2
13.7.2
11.20.0
13.6.0
13.5.0
11.19.0
certified/13.1-cert3-rc1
13.4.0
11.18.0
0.1.0
0.1.1
0.1.10
0.1.11
0.1.12
0.1.2
0.1.3
0.1.4
0.1.5
0.1.6
0.1.7
0.1.8
0.1.9
0.2.0
0.3.0
0.4.0
0.5.0
0.7.0
0.7.1
0.7.2
0.9.0
1.0.0
1.0.0-rc1
1.0.0-rc2
1.0.1
1.0.10
1.0.11
1.0.11.1
1.0.12
1.0.2
1.0.4
1.0.5
1.0.6
1.0.7
1.0.8
1.0.9
1.2.0
1.2.0-beta1
1.2.0-beta2
1.2.0-rc1
1.2.0-rc2
1.2.1
1.2.10
1.2.10-netsec
1.2.11
1.2.11-netsec
1.2.12
1.2.12-netsec
1.2.12.1
1.2.12.1-netsec
1.2.13
1.2.13-netsec
1.2.14
1.2.14-netsec
1.2.15
1.2.15-netsec
1.2.16
1.2.16-netsec
1.2.17
1.2.17-netsec
1.2.18
1.2.18-netsec
1.2.19
1.2.19-netsec
1.2.2
1.2.2-netsec
1.2.20
1.2.20-netsec
1.2.21
1.2.21-netsec
1.2.21.1
1.2.21.1-netsec
1.2.22
1.2.22-netsec
1.2.23
1.2.23-netsec
1.2.24
1.2.24-netsec
1.2.25
1.2.25-netsec
1.2.26
1.2.26-netsec
1.2.26.1
1.2.26.1-netsec
1.2.26.2
1.2.26.2-netsec
1.2.27
1.2.28
1.2.28.1
1.2.29
1.2.3
1.2.3-netsec
1.2.30
1.2.30.1
1.2.30.2
1.2.30.3
1.2.30.4
1.2.31
1.2.31.1
1.2.31.2
1.2.32
1.2.33
1.2.34
1.2.35
1.2.36
1.2.37
1.2.38
1.2.39
1.2.4
1.2.4-netsec
1.2.40
1.2.5
1.2.5-netsec
1.2.6
1.2.6-netsec
1.2.7
1.2.7-netsec
1.2.7.1
1.2.7.1-netsec
1.2.8
1.2.8-netsec
1.2.9
1.2.9-netsec
1.2.9.1
1.2.9.1-netsec
1.4.0
1.4.0-beta1
1.4.0-beta2
1.4.0-beta3
1.4.0-beta4
1.4.1
1.4.10
1.4.10.1
1.4.11
1.4.12
1.4.12.1
1.4.13
1.4.14
1.4.15
1.4.16
1.4.16.1
1.4.16.2
1.4.17
1.4.18
1.4.18.1
1.4.19
1.4.19-rc1
1.4.19-rc2
1.4.19-rc3
1.4.19-rc4
1.4.19.1
1.4.19.2
1.4.2
1.4.20
1.4.20-rc1
1.4.20-rc2
1.4.20-rc3
1.4.20.1
1.4.21
1.4.21-rc1
1.4.21-rc2
1.4.21.1
1.4.21.2
1.4.22
1.4.22-rc1
1.4.22-rc2
1.4.22-rc3
1.4.22-rc4
1.4.22-rc5
1.4.22.1
1.4.22.2
1.4.23
1.4.23-rc1
1.4.23-rc2
1.4.23-rc3
1.4.23-rc4
1.4.23-testing
1.4.23.1
1.4.23.2
1.4.24
1.4.24-rc1
1.4.24.1
1.4.25
1.4.25-rc1
1.4.25.1
1.4.26
1.4.26-rc1
1.4.26-rc2
1.4.26-rc3
1.4.26-rc4
1.4.26-rc5
1.4.26-rc6
1.4.26.1
1.4.26.2
1.4.26.3
1.4.27
1.4.27-rc1
1.4.27-rc2
1.4.27-rc3
1.4.27-rc4
1.4.27-rc5
1.4.27.1
1.4.28
1.4.28-rc1
1.4.29
1.4.29-rc1
1.4.29.1
1.4.3
1.4.30
1.4.30-rc1
1.4.30-rc2
1.4.30-rc3
1.4.31
1.4.31-rc1
1.4.31-rc2
1.4.32
1.4.32-rc1
1.4.32-rc2
1.4.33
1.4.33-rc1
1.4.33-rc2
1.4.33.1
1.4.34
1.4.34-rc1
1.4.34-rc2
1.4.35
1.4.35-rc1
1.4.36
1.4.36-rc1
1.4.37
1.4.37-rc1
1.4.37.1
1.4.38
1.4.38-rc1
1.4.38.1
1.4.39
1.4.39-rc1
1.4.39.1
1.4.39.2
1.4.4
1.4.40
1.4.40-rc1
1.4.40-rc2
1.4.40-rc3
1.4.40.1
1.4.40.2
1.4.41
1.4.41-rc1
1.4.41.1
1.4.41.2
1.4.42
1.4.42-rc1
1.4.42-rc2
1.4.43
1.4.44
1.4.5
1.4.6
1.4.7
1.4.7.1
1.4.8
1.4.9
1.6.0
1.6.0-beta1
1.6.0-beta2
1.6.0-beta3
1.6.0-beta4
1.6.0-beta5
1.6.0-beta6
1.6.0-beta7
1.6.0-beta7.1
1.6.0-beta8
1.6.0-beta9
1.6.0-rc1
1.6.0-rc2
1.6.0-rc3
1.6.0-rc4
1.6.0-rc5
1.6.0-rc6
1.6.0.1
1.6.0.10
1.6.0.11-rc1
1.6.0.11-rc2
1.6.0.12
1.6.0.13
1.6.0.13-rc1
1.6.0.14
1.6.0.14-rc1
1.6.0.15
1.6.0.16
1.6.0.16-rc1
1.6.0.16-rc2
1.6.0.17
1.6.0.18
1.6.0.18-rc1
1.6.0.18-rc2
1.6.0.18-rc3
1.6.0.19
1.6.0.2
1.6.0.20
1.6.0.20-rc1
1.6.0.21
1.6.0.21-rc1
1.6.0.22
1.6.0.23
1.6.0.23-rc1
1.6.0.23-rc2
1.6.0.24
1.6.0.25
1.6.0.26
1.6.0.26-rc1
1.6.0.27
1.6.0.27-rc1
1.6.0.27-rc2
1.6.0.27-rc3
1.6.0.28
1.6.0.28-rc1
1.6.0.28-rc2
1.6.0.3
1.6.0.3-rc1
1.6.0.3.1
1.6.0.4-rc1
1.6.0.4-testing
1.6.0.5
1.6.0.6
1.6.0.6-rc1
1.6.0.7
1.6.0.7-rc1
1.6.0.7-rc2
1.6.0.8
1.6.0.9
1.6.1-beta1
1.6.1-beta2
1.6.1-beta3
1.6.1-beta4
1.6.1-rc1
1.6.1.0
1.6.1.0-rc2
1.6.1.0-rc3
1.6.1.0-rc4
1.6.1.0-rc5
1.6.1.1
1.6.1.10
1.6.1.10-rc1
1.6.1.10-rc2
1.6.1.10-rc3
1.6.1.11
1.6.1.12
1.6.1.12-rc1
1.6.1.13
1.6.1.13-rc1
1.6.1.14
1.6.1.15-rc1
1.6.1.15-rc2
1.6.1.16
1.6.1.17
1.6.1.18
1.6.1.18-rc1
1.6.1.18-rc2
1.6.1.19
1.6.1.19-rc1
1.6.1.19-rc2
1.6.1.19-rc3
1.6.1.2
1.6.1.20
1.6.1.20-rc1
1.6.1.20-rc2
1.6.1.21
1.6.1.22
1.6.1.23
1.6.1.24
1.6.1.25
1.6.1.3-rc1
1.6.1.4
1.6.1.5
1.6.1.5-rc1
1.6.1.6
1.6.1.7-rc1
1.6.1.7-rc2
1.6.1.8
1.6.1.9
1.6.2.0
1.6.2.0-beta1
1.6.2.0-beta2
1.6.2.0-beta3
1.6.2.0-beta4
1.6.2.0-rc1
1.6.2.0-rc2
1.6.2.0-rc3
1.6.2.0-rc4
1.6.2.0-rc5
1.6.2.0-rc6
1.6.2.0-rc7
1.6.2.0-rc8
1.6.2.1
1.6.2.1-rc1
1.6.2.10
1.6.2.10-rc1
1.6.2.10-rc2
1.6.2.11
1.6.2.11-rc1
1.6.2.11-rc2
1.6.2.12
1.6.2.12-rc1
1.6.2.13
1.6.2.14
1.6.2.14-rc1
1.6.2.15
1.6.2.15-rc1
1.6.2.15.1
1.6.2.16
1.6.2.16-rc1
1.6.2.16.1
1.6.2.16.2
1.6.2.17
1.6.2.17-rc1
1.6.2.17-rc2
1.6.2.17-rc3
1.6.2.17.1
1.6.2.17.2
1.6.2.17.3
1.6.2.18
1.6.2.18-rc1
1.6.2.18.1
1.6.2.18.2
1.6.2.19
1.6.2.19-rc1
1.6.2.2
1.6.2.20
1.6.2.21
1.6.2.22
1.6.2.23
1.6.2.24
1.6.2.3-rc1
1.6.2.3-rc2
1.6.2.4
1.6.2.5
1.6.2.6
1.6.2.6-rc1
1.6.2.6-rc2
1.6.2.7
1.6.2.7-rc1
1.6.2.7-rc2
1.6.2.7-rc3
1.6.2.8
1.6.2.8-rc1
1.6.2.8-rc2
1.6.2.9
1.6.2.9-rc1
1.6.2.9-rc2
1.6.2.9-rc3
1.8.0
1.8.0-beta1
1.8.0-beta2
1.8.0-beta3
1.8.0-beta4
1.8.0-beta5
1.8.0-rc1
1.8.0-rc2
1.8.0-rc3
1.8.0-rc4
1.8.0-rc5
1.8.1
1.8.1-rc1
1.8.1.1
1.8.1.2
1.8.10.0
1.8.10.0-rc1
1.8.10.0-rc2
1.8.10.0-rc3
1.8.10.0-rc4
1.8.10.1
1.8.11.0
1.8.11.0-rc1
1.8.11.0-rc2
1.8.11.0-rc3
1.8.11.1
1.8.12.0
1.8.12.0-rc1
1.8.12.0-rc2
1.8.12.0-rc3
1.8.12.1
1.8.12.2
1.8.13.0
1.8.13.0-rc1
1.8.13.0-rc2
1.8.13.1
1.8.14.0
1.8.14.0-rc1
1.8.14.0-rc2
1.8.14.1
1.8.15-cert4
1.8.15.0
1.8.15.0-rc1
1.8.15.1
1.8.16.0
1.8.16.0-rc1
1.8.16.0-rc2
1.8.17.0
1.8.17.0-rc1
1.8.17.0-rc2
1.8.17.0-rc3
1.8.18.0
1.8.18.0-rc1
1.8.18.1
1.8.19.0
1.8.19.0-rc1
1.8.19.0-rc2
1.8.19.0-rc3
1.8.19.0-tc1
1.8.19.1
1.8.2
1.8.2-rc1
1.8.2.1
1.8.2.2
1.8.2.3
1.8.2.4
1.8.20.0
1.8.20.0-rc1
1.8.20.0-rc2
1.8.20.1
1.8.20.2
1.8.21.0
1.8.21.0-rc1
1.8.21.0-rc2
1.8.22.0
1.8.22.0-rc1
1.8.22.0-rc2
1.8.23.0
1.8.23.0-rc1
1.8.23.0-rc2
1.8.23.1
1.8.24.0
1.8.24.0-rc1
1.8.24.0-rc2
1.8.24.1
1.8.25.0
1.8.25.0-rc1
1.8.25.0-rc2
1.8.26.0
1.8.26.0-rc1
1.8.26.0-rc2
1.8.26.1
1.8.27.0
1.8.27.0-rc1
1.8.27.0-rc2
1.8.28-cert5
1.8.28.0
1.8.28.0-rc1
1.8.28.1
1.8.28.2
1.8.29.0
1.8.29.0-rc1
1.8.3
1.8.3-rc1
1.8.3-rc2
1.8.3-rc3
1.8.3.1
1.8.3.2
1.8.3.3
1.8.30.0
1.8.30.0-rc1
1.8.31.0
1.8.31.0-rc1
1.8.31.1
1.8.32.0
1.8.32.0-rc1
1.8.32.0-rc2
1.8.32.1
1.8.32.2
1.8.32.3
1.8.4
1.8.4-rc1
1.8.4-rc2
1.8.4-rc3
1.8.4.1
1.8.4.2
1.8.4.3
1.8.4.4
1.8.5-rc1
1.8.5.0
1.8.5.1
1.8.6.0
1.8.6.0-rc1
1.8.6.0-rc2
1.8.6.0-rc3
1.8.7.0
1.8.7.0-rc1
1.8.7.0-rc2
1.8.7.1
1.8.7.2
1.8.8.0
1.8.8.0-rc1
1.8.8.0-rc2
1.8.8.0-rc3
1.8.8.0-rc4
1.8.8.0-rc5
1.8.8.1
1.8.8.2
1.8.9.0
1.8.9.0-rc1
1.8.9.0-rc2
1.8.9.0-rc3
1.8.9.1
1.8.9.2
1.8.9.3
10.0.0
10.0.0-beta1
10.0.0-beta2
10.0.0-rc1
10.0.0-rc2
10.0.0-rc3
10.0.0-rc4
10.0.1
10.1.0
10.1.0-rc1
10.1.0-rc2
10.1.1
10.1.2
10.1.3
10.10.0
10.10.0-digiumphones
10.10.0-digiumphones-rc1
10.10.0-digiumphones-rc2
10.10.0-rc1
10.10.0-rc2
10.10.1
10.10.1-digiumphones
10.11.0
10.11.0-digiumphones
10.11.0-digiumphones-rc1
10.11.0-digiumphones-rc2
10.11.0-digiumphones-rc3
10.11.0-rc1
10.11.0-rc2
10.11.0-rc3
10.11.1
10.11.1-digiumphones
10.12.0
10.12.0-digiumphones
10.12.0-digiumphones-rc1
10.12.0-digiumphones-rc2
10.12.0-rc1
10.12.0-rc2
10.12.1
10.12.1-digiumphones
10.12.2
10.12.2-digiumphones
10.12.3
10.12.3-digiumphones
10.12.4
10.12.4-digiumphones
10.2.0
10.2.0-rc1
10.2.0-rc2
10.2.0-rc3
10.2.0-rc4
10.2.1
10.3.0
10.3.0-rc1
10.3.0-rc2
10.3.0-rc3
10.3.1
10.4.0
10.4.0-digiumphones-rc1
10.4.0-digiumphones-rc2
10.4.0-rc1
10.4.0-rc2
10.4.0-rc3
10.4.1
10.4.2
10.5.0
10.5.0-digiumphones
10.5.0-digiumphones-rc1
10.5.0-digiumphones-rc2
10.5.0-rc1
10.5.0-rc2
10.5.1
10.5.1-digiumphones
10.5.2
10.5.2-digiumphones
10.6.0
10.6.0-digiumphones
10.6.0-digiumphones-rc1
10.6.0-digiumphones-rc2
10.6.0-rc1
10.6.0-rc2
10.6.1
10.6.1-digiumphones
10.7.0
10.7.0-digiumphones
10.7.0-digiumphones-rc1
10.7.0-rc1
10.7.1
10.7.1-digiumphones
10.8.0
10.8.0-digiumphones
10.8.0-digiumphones-rc1
10.8.0-digiumphones-rc2
10.8.0-rc1
10.8.0-rc2
10.9.0
10.9.0-digiumphones
10.9.0-digiumphones-rc1
10.9.0-digiumphones-rc2
10.9.0-digiumphones-rc3
10.9.0-rc1
10.9.0-rc2
10.9.0-rc3
11.0.0
11.0.0-beta1
11.0.0-beta2
11.0.0-rc1
11.0.0-rc2
11.0.1
11.0.2
11.1.0
11.1.0-rc1
11.1.0-rc2
11.1.0-rc3
11.1.1
11.1.2
11.10.0
11.10.0-rc1
11.10.1
11.10.2
11.11.0
11.11.0-rc1
11.12.0
11.12.0-rc1
11.12.1
11.13.0
11.13.0-rc1
11.13.1
11.14.0
11.14.0-rc1
11.14.0-rc2
11.14.1
11.14.2
11.15.0
11.15.0-rc1
11.15.0-rc2
11.15.1
11.16.0
11.16.0-rc1
11.17.0
11.17.0-rc1
11.17.1
11.18.0-rc1
11.19.0-rc1
11.2.0
11.2.0-rc1
11.2.0-rc2
11.2.1
11.2.2
11.20.0-rc1
11.20.0-rc2
11.20.0-rc3
11.21.0
11.21.0-rc1
11.21.0-rc2
11.21.0-rc3
11.21.1
11.22.0-rc1
11.3.0
11.3.0-rc1
11.3.0-rc2
11.4.0
11.4.0-rc1
11.4.0-rc2
11.4.0-rc3
11.5.0
11.5.0-rc1
11.5.0-rc2
11.5.1
11.6-cert11
11.6.0
11.6.0-rc1
11.6.0-rc2
11.6.1
11.7.0
11.7.0-rc1
11.7.0-rc2
11.8.0
11.8.0-rc1
11.8.0-rc2
11.8.0-rc3
11.8.1
11.9.0
11.9.0-rc1
11.9.0-rc2
11.9.0-rc3
12.0.0
12.0.0-alpha1
12.0.0-alpha2
12.0.0-beta1
12.0.0-beta2
12.1.0
12.1.0-rc1
12.1.0-rc2
12.1.0-rc3
12.1.1
12.2.0
12.2.0-rc1
12.2.0-rc2
12.2.0-rc3
12.3.0
12.3.0-rc1
12.3.0-rc2
12.3.1
12.3.2
12.4.0
12.4.0-rc1
12.5.0
12.5.0-rc1
12.5.1
12.6.0
12.6.0-rc1
12.6.1
12.7.0
12.7.0-rc1
12.7.0-rc2
12.7.1
12.7.2
12.8.0
12.8.0-rc1
12.8.0-rc2
12.8.1
12.8.2
13.0.0
13.0.0-beta1
13.0.0-beta2
13.0.0-beta3
13.0.1
13.0.2
13.1-cert2
13.1.0
13.1.0-rc1
13.1.0-rc2
13.1.1
13.2.0
13.2.0-rc1
13.2.1
13.3.0
13.3.0-rc1
13.3.1
13.3.2
13.4.0-rc1
13.5.0-rc1
13.6.0-rc1
13.6.0-rc2
13.6.0-rc3
13.7.0
13.7.0-rc1
13.7.0-rc2
13.7.0-rc3
13.7.1
13.8.0-rc1
certified/1.8.11-cert1
certified/1.8.11-cert10
certified/1.8.11-cert2
certified/1.8.11-cert3-rc1
certified/1.8.11-cert3-rc2
certified/1.8.11-cert4
certified/1.8.11-cert5
certified/1.8.11-cert5-rc1
certified/1.8.11-cert5-rc2
certified/1.8.11-cert6
certified/1.8.11-cert7
certified/1.8.11-cert8
certified/1.8.11-cert9
certified/1.8.11-cert9-rc1
certified/1.8.15-cert1
certified/1.8.15-cert1-rc1
certified/1.8.15-cert1-rc2
certified/1.8.15-cert1-rc3
certified/1.8.15-cert2
certified/1.8.15-cert3
certified/1.8.15-cert4
certified/1.8.15-cert5
certified/1.8.15-cert6
certified/1.8.15-cert7
certified/1.8.28-cert1
certified/1.8.28-cert1-rc1
certified/1.8.28-cert2
certified/1.8.28-cert3
certified/1.8.28-cert4
certified/1.8.28-cert5
certified/1.8.6-cert1
certified/11.2-cert1
certified/11.2-cert1-rc1
certified/11.2-cert1-rc2
certified/11.2-cert2
certified/11.2-cert3
certified/11.6-cert1
certified/11.6-cert1-rc1
certified/11.6-cert1-rc2
certified/11.6-cert10
certified/11.6-cert11
certified/11.6-cert12
certified/11.6-cert2
certified/11.6-cert3
certified/11.6-cert4
certified/11.6-cert5
certified/11.6-cert6
certified/11.6-cert7
certified/11.6-cert8
certified/11.6-cert9
certified/13.1-cert1
certified/13.1-cert1-rc1
certified/13.1-cert1-rc2
certified/13.1-cert1-rc3
certified/13.1-cert2
certified/13.1-cert3
${ noResults }
2231 Commits (8eec8fbf8396848500edad3f52ab7a7cea2ef4c4)
| Author | SHA1 | Message | Date |
|---|---|---|---|
|
|
8eec8fbf83 |
Make app_queue and res_agi independent of AMI being enabled.
The https://reviewboard.asterisk.org/r/2888/ review changes manager to not subscribe to stasis when it is disabled for performance reasons. When manager is disabled app_queue and res_agi decline to load and fail to clean up what they have already allocated. * Made app_queue and res_agi clean up allocated resources when they decline to load. * Made app_queue and res_agi use their own subscriptions to the stasis topics instead of borrowing manager's message router structure inappropriately. (closes issue ASTERISK-22604) Reported by: rmudgett Review: https://reviewboard.asterisk.org/r/2902/ ........ Merged revisions 400671 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400672 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
f4ebdca52a |
chan_pjsip: Make logger togglable without loading/unloading
This patch makes the res_pjsip_logger do a few things... First, it
will be built and installed by default now, so end users won't need
to enable it in menuselect. Second, while it is loaded, it no longer
will immediately issue log messages. Upon loading, it is in the
disabled state and must be turned on with the new CLI command. The
CLI command 'pjsip set logger <on/off/host> has been added and can be
used to do the following:
pjsip set logger on:
Enables logger for all PJSIP traffic
pjsip set logger off:
Disables logger for all PJSIP traffic
pjsip set logger host <host>:
Enables logger for the specific host
Review: https://reviewboard.asterisk.org/r/2900/
........
Merged revisions 400542 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400543 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
12 years ago |
|
|
8d7873b836 |
ARI: Add subscription support
This patch adds an /applications API to ARI, allowing explicit management of
Stasis applications.
* GET /applications - list current applications
* GET /applications/{applicationName} - get details of a specific application
* POST /applications/{applicationName}/subscription - explicitly subscribe to
a channel, bridge or endpoint
* DELETE /applications/{applicationName}/subscription - explicitly unsubscribe
from a channel, bridge or endpoint
Subscriptions work by a reference counting mechanism: if you subscript to an
event source X number of times, you must unsubscribe X number of times to stop
receiveing events for that event source.
Review: https://reviewboard.asterisk.org/r/2862
(issue ASTERISK-22451)
Reported by: Matt Jordan
........
Merged revisions 400522 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
12 years ago |
|
|
b52c972b17 |
Enclose the To URI and update its user portion if a request user has been specified.
........ Merged revisions 400520 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400521 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
47da03e737 |
Replace the connection address at the SDP level if altering the SDP with the external media address.
........ Merged revisions 400510 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400511 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
bd8cf10d60 |
Fix a crash caused by muting and unmuting a channel in ARI without specifying a direction.
(closes issue ASTERISK-22637) Reported by: Scott Griepentrog Patch by Matt Jordan, whose office I have taken over in the name of Canada. ........ Merged revisions 400401 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400402 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
c3b1d8f8c1 |
res_rtp_multicast: Ensure SSRC is set properly
This fixes a bug where the SSRC field on multicast RTP can be stuck at
0 which can cause problems for endpoints trying to make sense of
incoming streams.
(closes issue ASTERISK-22567)
Reported by: Simone Camporeale
Patches:
22567_res_mulitcast_ssrc.patch uploaded by Simone Camporeale (License 6536)
........
Merged revisions 400393 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 400394 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 400395 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400397 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
12 years ago |
|
|
ee21eee7e0 |
Cache string values of formats on ast_format_cap() to save processing.
Channel snapshots have string representations of the channel's native formats. Prior to this change, the format strings were re-created on ever channel snapshot creation. Since channel native formats rarely change, this was very wasteful. Now, string representations of formats may optionally be stored on the ast_format_cap for cases where string representations may be requested frequently. When formats are altered, the string cache is marked as invalid. When strings are requested, the cache validity is checked. If the cache is valid, then the cached strings are copied. If the cache is invalid, then the string cache is rebuilt and copied, and the cache is marked as being valid again. Review: https://reviewboard.asterisk.org/r/2879 ........ Merged revisions 400356 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400363 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
c977f73e13 |
Fix crashes in res_pjsip_sdp_rtp and res_pjsip_t38 when a stream is rejected and external_media_address is set.
The callback function for changing the media address in streams wrongly assumes that a connection line will always be present. This is false as no line is present if a stream has been rejected. (closes issue ASTERISK-22645) Reported by: Rusty Newton ........ Merged revisions 400360 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400361 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
addbf276f5 |
Multiple revisions 400318-400319
........ r400318 | mmichelson | 2013-10-02 17:08:49 -0500 (Wed, 02 Oct 2013) | 12 lines Remove unnecessary waits from stasis. Since caches are updated on publisher threads, there is no need to wait for the cache updates to occur after a stasis message is published. In the case of chan_pjsip device state changes, this set of changes caused an improvement to performance. Review: https://reviewboard.asterisk.org/r/2890 ........ r400319 | mmichelson | 2013-10-02 17:10:54 -0500 (Wed, 02 Oct 2013) | 3 lines Remove svn:mergeinfo property. ........ Merged revisions 400318-400319 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400335 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
51a9b93a14 |
Fix a crash in res_pjsip_t38 caused by the wrong assumption that a session will always have a channel.
When starting up or shutting down this assumption is false. ........ Merged revisions 400284 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400285 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
97fcd6366d |
MALLOC_DEBUG: Fix some misuses of free() when MALLOC_DEBUG is enabled.
* There were several places in ARI where an external library was mallocing memory that must always be released with free(). When MALLOC_DEBUG is enabled, free() is redirected to the MALLOC_DEBUG version. Since the external library call still uses the normal malloc(), MALLOC_DEBUG complains that the freed memory block is not registered and will not free it. These cases must use ast_std_free(). * Changed calls to asprintf() and vasprintf() to the equivalent ast_asprintf() and ast_vasprintf() versions respectively. ........ Merged revisions 400270 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400271 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
424c0f2eb7 |
Fix a random one way audio issue in PJSIP.
Due to the asynchronous design of the PJMEDIA SDP negotiator it was possible for the SDP to be negotiated *after* a channel was created and after it was being wait on by an application. It is only after negotiation occurs that the file descriptors for RTP are placed on the channel. Since the channel was already being waited on these file descriptors were not monitored, causing incoming media to never be read. This change wakes up any application waiting on the channel so that added file descriptors end up being monitored. (closes issue AST-1227) Reported by: John Bigelow ........ Merged revisions 400256 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400257 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
83d55f85ec |
Allow specifying a channel to dial an extension and context in an ARI dial operation.
(issue ASTERISK-22625) Reported by: Scott Griepentrog ........ Merged revisions 400254 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400255 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
c33aac75e4 |
Retrieve and store the hostname only once so multiple threads do not potentially initialize it at the same time.
........ Merged revisions 400245 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400246 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
2de42c2a25 |
Multiple revisions 399887,400138,400178,400180-400181
........ r399887 | dlee | 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) | 1 line Minor performance bump by not allocate manager variable struct if we don't need it ........ r400138 | dlee | 2013-09-30 10:24:00 -0500 (Mon, 30 Sep 2013) | 23 lines Stasis performance improvements This patch addresses several performance problems that were found in the initial performance testing of Asterisk 12. The Stasis dispatch object was allocated as an AO2 object, even though it has a very confined lifecycle. This was replaced with a straight ast_malloc(). The Stasis message router was spending an inordinate amount of time searching hash tables. In this case, most of our routers had 6 or fewer routes in them to begin with. This was replaced with an array that's searched linearly for the route. We more heavily rely on AO2 objects in Asterisk 12, and the memset() in ao2_ref() actually became noticeable on the profile. This was #ifdef'ed to only run when AO2_DEBUG was enabled. After being misled by an erroneous comment in taskprocessor.c during profiling, the wrong comment was removed. Review: https://reviewboard.asterisk.org/r/2873/ ........ r400178 | dlee | 2013-09-30 13:26:27 -0500 (Mon, 30 Sep 2013) | 24 lines Taskprocessor optimization; switch Stasis to use taskprocessors This patch optimizes taskprocessor to use a semaphore for signaling, which the OS can do a better job at managing contention and waiting that we can with a mutex and condition. The taskprocessor execution was also slightly optimized to reduce the number of locks taken. The only observable difference in the taskprocessor implementation is that when the final reference to the taskprocessor goes away, it will execute all tasks to completion instead of discarding the unexecuted tasks. For systems where unnamed semaphores are not supported, a really simple semaphore implementation is provided. (Which gives identical performance as the original taskprocessor implementation). The way we ended up implementing Stasis caused the threadpool to be a burden instead of a boost to performance. This was switched to just use taskprocessors directly for subscriptions. Review: https://reviewboard.asterisk.org/r/2881/ ........ r400180 | dlee | 2013-09-30 13:39:34 -0500 (Mon, 30 Sep 2013) | 28 lines Optimize how Stasis forwards are dispatched This patch optimizes how forwards are dispatched in Stasis. Originally, forwards were dispatched as subscriptions that are invoked on the publishing thread. This did not account for the vast number of forwards we would end up having in the system, and the amount of work it would take to walk though the forward subscriptions. This patch modifies Stasis so that rather than walking the tree of forwards on every dispatch, when forwards and subscriptions are changed, the subscriber list for every topic in the tree is changed. This has a couple of benefits. First, this reduces the workload of dispatching messages. It also reduces contention when dispatching to different topics that happen to forward to the same aggregation topic (as happens with all of the channel, bridge and endpoint topics). Since forwards are no longer subscriptions, the bulk of this patch is simply changing stasis_subscription objects to stasis_forward objects (which, admittedly, I should have done in the first place.) Since this required me to yet again put in a growing array, I finally abstracted that out into a set of ast_vector macros in asterisk/vector.h. Review: https://reviewboard.asterisk.org/r/2883/ ........ r400181 | dlee | 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) | 28 lines Remove dispatch object allocation from Stasis publishing While looking for areas for performance improvement, I realized that an unused feature in Stasis was negatively impacting performance. When a message is sent to a subscriber, a dispatch object is allocated for the dispatch, containing the topic the message was published to, the subscriber the message is being sent to, and the message itself. The topic is actually unused by any subscriber in Asterisk today. And the subscriber is associated with the taskprocessor the message is being dispatched to. First, this patch removes the unused topic parameter from Stasis subscription callbacks. Second, this patch introduces the concept of taskprocessor local data, data that may be set on a taskprocessor and provided along with the data pointer when a task is pushed using the ast_taskprocessor_push_local() call. This allows the task to have both data specific to that taskprocessor, in addition to data specific to that invocation. With those two changes, the dispatch object can be removed completely, and the message is simply refcounted and sent directly to the taskprocessor. Review: https://reviewboard.asterisk.org/r/2884/ ........ Merged revisions 399887,400138,400178,400180-400181 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400186 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
b44ce141e5 |
chan_sip: Allow Asterisk to retry after 403 on register
This adds a global option in chan_sip to allow it to continue attempting registration if a 403 is received, clearing the cached nonce and treating it as a non-fatal response. Normally, this would cause registration attempts to that endpoint to stop. This also adds a similar per-outbound-registration option to chan_pjsip which allows the retry interval to be altered for 403 responses to REGISTER requests. (closes issue ASTERISK-17138) Review: https://reviewboard.asterisk.org/r/2874/ Reported by: Rudi ........ Merged revisions 400137 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 400140 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 400141 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400142 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
a1d56da32a |
res_pjsip_notify: Add documentation
We forgot to add documentation for res_pjsip_notify, which would prevent it from being loaded. Whoops. This patch also updates res_pjsip_notify to use pjsip_notify.conf, which now has its own sample file in the configs directory as well. Review: https://reviewboard.asterisk.org/r/2835/ ........ Merged revisions 400121 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400122 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
c4b5c549fd |
res_rtp_asterisk: Correct erroneous lost packet information in RTCP reports
RTCP's calculation of the number of lost packets in an RTP stream is based on that stream's sequence number count, the number of received packets, and how many packets we expect to receive. When the SSRC for an RTP stream changes, there can - and almost always will be - a large jump in the next packet's timestamp and sequence number. If we don't reset the number of received packets, sequence number count, and other metrics used by RTCP, the next RR/SR report will use the previous SSRC's values to calculate the lost packet count for the new SSRC - resulting in a very large number of lost packets. This patch modifies res_rtp_asterisk such that, if it detects a SSRC change, it will reset the various values used by the RTCP calculations. From the perspective of RTCP, this appears as a new media stream - which is what it is. Review: https://reviewboard.asterisk.org/r/2886/ (closes issue AST-1174) Reported by: Thomas Arimont ........ Merged revisions 400089 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 400093 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 400108 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400117 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
2b32732aa8 |
app_cdr and res_parking: Fix some resource leaks.
* app_cdr left the ResetCDR application registered.
* res_parking leaked a ref to config global.
(closes issue ASTERISK-22566)
Reported by: Corey Farrell
Patches:
ASTERISK-22566-r2.patch (license #5909) patch uploaded by Corey Farrell
........
Merged revisions 400020 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400021 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
12 years ago |
|
|
d6bceb0350 |
res_pjsip: crash when using localnet and external_signaling_address options
There was a collision of mod_data use on the transaction between using a nat hook and an session response callback. During state change it was assumed what was in the mod_data was nothing or the response callback. However, it was possible for it to also contain a nat hook thus resulting in a bad cast and a crash. Added the ability to store multiple data elements in mod_data via a hash table. In this instance, mod_data now stores a hash table of the two values that can be retrieved using an associated string key. (closes issue ASTERISK-22394) Reported by: Rusty Newton Review: https://reviewboard.asterisk.org/r/2843/ ........ Merged revisions 399990 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399991 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
103ebcf807 |
pjsip: race condition in registrar
While handling a registration request a race condition could occur if/when two+ clients registered at the same time. This happened when one request obtained a copy of the current contacts for an AOR and another request did the same before the first request updated. Thus the second would update and overwrite the first (or vice-versa depending on which actually updated first). In the case of it being the same contact two "add" events would be raised. pjsip registration handling is now serialized to alleviate this issue. (closes issue AST-1213) Reported by: John Bigelow Review: https://reviewboard.asterisk.org/r/2860/ ........ Merged revisions 399897 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399898 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
21fb2fca5e |
Broke the build - Fixing XML DTD violation added in r399782, missing <para> tags inside a <note>
........ Merged revisions 399798 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399799 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
1b9db0fd99 |
Fixing documentation for the configOption "external_media_address" of both Endpoints and Transports
Re-using some of Mark Michelson's text from an E-mail discussion for: * Modifying synopsis for both options * Adding description to both options * Changing name of "external_media_address" for Endpoint configuration to "media_address" in anticipation of the option name being changed. (As it is not really specific to external destinations) (issue ASTERISK-22405) (closes issue ASTERISK-22405) Reported by: Rusty Newton Review: https://reviewboard.asterisk.org/r/2850/ ........ Merged revisions 399781 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399782 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
85d6db6cbe |
Fix crash in res_pjsip on load if error occurs, and prevent unloading of res_pjsip and res_pjsip_session.
During load time in res_pjsip if an error occurred the operation would attempt to rollback all operations done during load. This is not permitted by PJSIP as it will assert if the operation has not been done. This fix changes the code so it will only rollback what has been initialized already. Further changes also prevent res_pjsip and res_pjsip_session from being unloaded. This is due to limitations within PJSIP itself. The library environment can only be changed to a certain extent and does not provide the ability, currently, to deinitialize certain required functionality. (closes issue ASTERISK-22474) Reported by: Corey Farrell ........ Merged revisions 399624 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399625 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
ec5a724714 |
res_rtp_asterisk: Fix ref leaks in ast_rtcp_read().
Moved rtcp_report RAII_VAR declaration into the loop so it is unref'ed
after every loop. Moved message_blob to loop and switched it to a regular
variable. The regular variable was used since message_blob is used in a
very contained way.
(closes issue ASTERISK-22565)
Reported by: Corey Farrell
Patches:
rtcp_report-leak.patch (license #5909) patch uploaded by Corey Farrell
Tested by: Corey Farrell
........
Merged revisions 399607 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399608 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
12 years ago |
|
|
0e1d364fbd |
res_pjsip_messaging: Register message technology as pjsip
pjsip's message technology was being registered as 'sip', which was causing it to not load due it conflicting with chan_sip's registered 'sip' technology for messaging. It now registers as 'pjsip'. However, due to this change the "to" field for outgoing pjsip messages need to be prefixed with 'pjsip:' instead of 'sip:'. Incoming messages to res_pjsip_messaging will automatically have their "to" fields altered in order to accommodate the change. Outgoing messages also handle changing it back to 'sip' before being sent so the pjsip library will properly handle it. (closes issue ASTERISK-22445) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2833/ ........ Merged revisions 399339 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399340 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
391f0003c4 |
Change the "external_media_address" PJSIP endpoint option to "media_address".
The endpoint option does not apply to communication with external entities. Rather, the option is applied to all communications with the endpoint. The external_media_address transport configuration option may override the endpoint option if it turns out that we are going to be communicating with an external entity. Two things of note: 1) I have not updated the XML documentation. This is being taken care of by Rusty as part of his work on issue ASTERISK-22405 2) This commit is likely to cause testsuite failures since there are tests that use the external_media_address endpoint option, and they will need to be changed over. Well, I'm planning to get that updated ASAP after this commit. (closes issue ASTERISK-22528) reported by Rusty Newton ........ Merged revisions 399283 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399284 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
10d4ed93ff |
app_speech_utils: Fix unresolved symbol ast_speech_get_setting().
Fixes regression introduced by -r374096. * Made res_speech.export.in export ast_* symbols instead of specific functions. * Made app_speech_utils.c declare that it is dependent upon res_speech. (issue ASTERISK-17136) Reported by: Richard Kenner ........ Merged revisions 399197 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399198 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
2a371cd80b |
Restore Dial, Queue, and FollowMe 'I' option support.
The Dial, Queue, and FollowMe applications need to inhibit the bridging initial connected line exchange in order to support the 'I' option. * Replaced the pass_reference flag on ast_bridge_join() with a flags parameter to pass other flags defined by enum ast_bridge_join_flags. * Replaced the independent flag on ast_bridge_impart() with a flags parameter to pass other flags defined by enum ast_bridge_impart_flags. * Since the Dial, Queue, and FollowMe applications are now the only callers of ast_bridge_call() and ast_bridge_call_with_flags(), changed the calling contract to require the initial COLP exchange to already have been done by the caller. * Made all callers of ast_bridge_impart() check the return value. It is important. As a precaution, I also made the compiler complain now if it is not checked. * Did some cleanup in parking_tests.c as a result of checking the ast_bridge_impart() return value. An independent, but associated change is: * Reduce stack usage in ast_indicate_data() and add a dropping redundant connected line verbose message. (closes issue ASTERISK-22072) Reported by: Joshua Colp Review: https://reviewboard.asterisk.org/r/2845/ ........ Merged revisions 399136 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399138 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
9deb416397 |
Create more accurate Contact headers for dialogs when we are the UAS.
(closes issue AST-1207) reported by John Bigelow Review: https://reviewboard.asterisk.org/r/2842 ........ Merged revisions 399083 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399084 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
bbf5fbbd8c |
Change how realms are handled for outbound authentication.
With this change, if no realm is specified in an outbound auth section, then we will simply match the realm that was present in the 401/407 challenge. (closes issue ASTERISK-22471) Reported by George Joseph (closes issue ASTERISK-22386) Reported by Rusty Newton Patches: outbound_auth_realm_v4.patch uploaded by George Joseph (License #6322) ........ Merged revisions 399059 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399082 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
873969d6c5 |
Broke the build! Forgot para tags within my description.
https://bamboo.asterisk.org/bamboo/browse/AST-ATRUNKBUILD-304 ........ Merged revisions 399064 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399071 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
2a57f6ccf7 |
res_pjsip: Forward PJSIP logging to Asterisk logging
This patch uses PJSIP's pj_log_set_log_func() to forward PJSIP's log messages to Asterisk's logger. This is done in a new module: res_pjsip_log_forwarder.so. This patch sets defaultenabled on the existing res_pjsip_logger.so to no, since logging every SIP packet seems a bit odd to do by default, and is (hopefully) less necessary with regular PJSIP logging. It also removes res_rtp_asterisk's disabling of PJSIP logging. (closes issue ASTERISK-22360) Reported by: Joshua Colp Review: https://reviewboard.asterisk.org/r/2830/ ........ Merged revisions 399049 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399051 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
f56796a539 |
ARI: Fix WebSocket response when subprotocol isn't specified
When I moved the ARI WebSocket from /ws to /ari/events, I added code to allow a WebSocket to connect without specifying the subprotocol if there's only one subprotocol handler registered for the WebSocket. Naively, I coded it to always respond with the subprotocol in use. Unfortunately, according to RFC 6455, if the server's response includes a subprotocol header field that "indicates the use of a subprotocol that was not present in the client's handshake [...], the client MUST _Fail the WebSocket Connection_.", emphasis theirs. This patch correctly omits the Sec-WebSocket-Protocol if one is not specified by the client. (closes issue ASTERISK-22441) Review: https://reviewboard.asterisk.org/r/2828/ ........ Merged revisions 399039 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399042 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
fc09e5eb66 |
'identify' configObject doesn't have a synopsis
Add a straightforward synopsis and description to the identify config object in XML documentation. (issue ASTERISK-22311) (closes issue ASTERISK-22311) Reported By: Rusty Newton ........ Merged revisions 399031 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399032 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
1b777d8946 |
Documentation fix and improvements to XML configuration help res_pjsip_acl
* One bug fix. Made the synopsis for "type" to accurate.
* changing the usage of "IP-domains" to "IP addresses"
* clarifying the usage for the options, by adding a relevant description for
each
* modified other areas of the XML help for clarity, such as the module
description and a few synopsis changes here and there. See the patch.
(issue ASTERISK-22458)
(closes issue ASTERISK-22458)
Reported By: Rusty Newton
Review: https://reviewboard.asterisk.org/r/2823/
........
Merged revisions 399017 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399018 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
12 years ago |
|
|
6ad74509f3 |
Fix symbol collision with pjsua.
We shouldn't be exporting any symbols that start with pjsip_. ........ Merged revisions 398927 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398928 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
4d35941891 |
pjsip: reinvite for connected line updates occurs when it should not
Connected line updates are now only sent out if an actual update needs to occur. This happens under the following conditions: 1. The endpoint we are sending to is trusted. 2. Either a P-Asserted-Identity or Remote Party-ID header needs to be added/sent. 3. The connected id's number and name are valid. Also added an SDP when an update is sent out. (closes issue AST-1212) Reported by: John Bigelow Review: https://reviewboard.asterisk.org/r/2831/ ........ Merged revisions 398806 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398808 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
83bf017db9 |
Fix incorrect usages of ast_realloc().
There are several locations in the code base where this is done: buf = ast_realloc(buf, new_size); This is going to leak the original buf contents if the realloc fails. Review: https://reviewboard.asterisk.org/r/2832/ ........ Merged revisions 398757 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 398758 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 398759 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398760 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
9fb34542d1 |
Add extra debugging to res_pjsip_endpoint_identifier_ip
........ Merged revisions 398694 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398695 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
0bcc676d09 |
Multiple revisions 398638-398639
........ r398638 | dlee | 2013-09-09 14:01:54 -0500 (Mon, 09 Sep 2013) | 1 line Added note about expected behavior of originate ........ r398639 | dlee | 2013-09-09 14:02:27 -0500 (Mon, 09 Sep 2013) | 1 line Added note about expected behavior of originate (the rest of the commit) ........ Merged revisions 398638-398639 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398641 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
ad89dffb8a |
Prevent XMPP timeout on blank responses
Sometimes the Google Voice servers have a bad habit of sending out 1 byte replies to the xmpp resource. When a blank 1 byte reply is received from the socket the buffer attempts to wait (endlessly) for the rest of the reply from google which effectively blocks the socket and google voice calls will no longer come into the server. This patch allows the xmpp module to correctly detect empty packets and send out ping replies to google. It also sets a socket timeout on the default socket which prevents the xmpp socket from closing and preventing future google voice calls from coming into the server. Furthermore instead of sending an empty reply back to google we send a proper xmpp ping reply back. This also adds several more socket messages. (closes issue ASTERISK-22347) Reported by: Andrew Nagy Review: https://reviewboard.asterisk.org/r/2771 Patches: xmpp_fix_1.diff uploaded by Andrew Nagy (License #6524) ........ Merged revisions 398618 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 398619 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398620 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
0bed76989a |
Multiple revisions 398558,398577
........
r398558 | kmoore | 2013-09-06 14:28:16 -0500 (Fri, 06 Sep 2013) | 17 lines
Fix Jabber/XMPP distributed MWI
The mailbox and context are swapped on the receiving end for all users
of Jabber and XMPP distributed MWI in Asterisk 1.8 and all more recent
versions. This swaps those values to be correct when publishing to the
internal event system from Jabber/XMPP distributed MWI state.
(closes issue ASTERISK-22435)
Reported by: abelbeck
Tested by: Michael Keuter
Patches:
asterisk-1.8-res_jabber-aji_handle_pubsub_event.patch uploaded by abelbeck
asterisk-11-res_xmpp-xmpp_pubsub_handle_event.patch uploaded by abelbeck
........
Merged revisions 398523 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r398577 | kmoore | 2013-09-06 16:00:56 -0500 (Fri, 06 Sep 2013) | 10 lines
Commit the remainder of r398523
This is a missing part of the commit in revision 398523 that corrects
the name of a variable.
(issue ASTERISK-22435)
........
Merged revisions 398576 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 398558,398577 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 398580 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398603 65c4cc65-6c06-0410-ace0-fbb531ad65f3
|
12 years ago |
|
|
53dbe10f5c |
Fix build warnings
When AST_DEVMODE is not defined, ast_asserts are not compiled into the binary. In some cases, this means variables are not referenced or are set but unused which causes warnings to show up. (closes issue ASTERISK-22446) Reported by: Jason Parker (qwell) ........ Merged revisions 398521 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398522 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
23ed2ca57f |
Clarify server_uri and client_uri registration settings.
Used some of Rusty's suggested language plus also included more SIPesque descriptions of where the URIs are actually used in an outgoing REGISTER. (closes issue ASTERISK-22390) reported by Rusty Newton ........ Merged revisions 398368 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398369 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
517389b1e7 |
Give more detail regarding failures to create request with auth credentials.
(issue ASTERISK-22386) ........ Merged revisions 398299 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398300 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
1be7514a59 |
Debug messages for pjsip outbound registration
Added debug messages indicating that an outbound registration attempt was made and it was successful in pjsip. (closes issue ASTERISK-22388) Reported by: Rusty Newton ........ Merged revisions 398226 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398227 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
e5542ab1e7 |
Prevent a crash in res_pjsip_dtmf_info.c
This change makes sure that a content type header exists before checking the contents of the header against known SIP INFO DTMF content types. ........ Merged revisions 398206 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398207 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |
|
|
9bad1dabcf |
Add a reloadable option for sorcery type objects
Some configuration objects currently won't place nice if reloaded. Specifically, in this case the pjsip transport objects. Now when registering an object in sorcery one may specify that the object is allowed to be reloaded or not. If the object is set to not reload then upon reloading of the configuration the objects of that type will not be reloaded. The initially loaded objects of that type however will remain. While the transport objects will not longer be reloaded it is still possible for a user to configure an endpoint to an invalid transport. A couple of log messages were added to help diagnose this problem if it occurs. (closes issue ASTERISK-22382) Reported by: Rusty Newton (closes issue ASTERISK-22384) Reported by: Rusty Newton Review: https://reviewboard.asterisk.org/r/2807/ ........ Merged revisions 398139 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398140 65c4cc65-6c06-0410-ace0-fbb531ad65f3 |
12 years ago |