13 Commits (8d4c188fda72de05be9424542dbb2a26110c9d32)

Author	SHA1	Message	Date
Matt Jordan	1a3e699316	res/stasis: Add CLI commands for displaying/debugging ARI apps ... This patch adds three new CLI commands: - ari show apps: list the registered ARI applications - ari show app: show detailed information about an ARI application - ari set debug: dump events being sent to an ARI application Note that while these CLI commands live in the res_stasis module, we use the 'ari' family for these commands. This was done as most users of Asterisk aren't aware of the semantic differences between ARI and res_stasis, and some 'ari' CLI commands already exist. ASTERISK-26488 #close Change-Id: I51ad6ff0cabee0d69db06858c13f18b1c513c9f5	9 years ago
Richard Mudgett	21d419e4fc	ari/ari_websockets.c: Fix ast_debug parameter type mismatch. ... This is a type mismatch fix of the debugging commit c63316eec1 made to find out why a testsuite test was failing only on one of the continuous integration build agents. Change-Id: Iba34f6e87cec331f6ac80e4daff6476ea6f00a75	10 years ago
Mark Michelson	c63316eec1	res_http_websocket: Debug write lengths. ... Commit 39cc28f6ea attempted to fix a test failure observed on 32 bit test agents by ensuring that a cast from a 32 bit unsigned integer to a 64 bit unsigned integer was happening in a predictable place. As it turns out, this did not cause test runs to succeed. This commit adds several redundant debug messages that print the payload lengths of websocket frames. The idea here is that this commit will not cause tests to succeed for the faulty test agent, but we might deduce where the fault lies more easily this way by observing at what point the expected value (537) changes to some ungangly huge number. If you are wondering why something like this is being committed to the branch, keep in mind that in commit 39cc28f6ea I noted that the observed test failures only happen when automated tests are run. Attempts to run the tests by hand manually on the test agent result in the tests passing. Change-Id: I14a65c19d8af40dadcdbd52348de3b0016e1ae8d	10 years ago
Mark Michelson	35a98161df	res_http_websocket: Avoid passing strlen() to ast_websocket_write(). ... We have seen a rash of test failures on a 32-bit build agent. Commit 48698a5e21 solved an obvious problem where we were not encoding a 64-bit value correctly over the wire. This commit, however, did not solve the test failures. In the failing tests, ARI is attempting to send a 537 byte text frame over a websocket. When sending a frame this small, 16 bits are all that is required in order to encode the payload length on the websocket frame. However, ast_websocket_write() thinks that the payload length is greater than 65535 and therefore writes out a 64 bit payload length. Inspecting this payload length, the lower 32 bits are exactly what we would expect it to be, 537 in hex. The upper 32 bits, are junk values that are not expected to be there. In the failure, we are passing the result of strlen() to a function that expects a uint64_t parameter to be passed in. strlen() returns a size_t, which on this 32-bit machine is 32 bits wide. Normally, passing a 32-bit unsigned value to somewhere where a 64-bit unsigned value is expected would cause no problems. In fact, in manual runs of failing tests, this works just fine. However, ast_websocket_write() uses the Asterisk optional API, which means that rather than a simple function call, there are a series of macros that are used for its declaration and implementation. These macros may be causing some sort of error to occur when converting from a 32 bit quantity to a 64 bit quantity. This commit changes the logic by making existing ast_websocket_write() calls use ast_websocket_write_string() instead. Within ast_websocket_write_string(), the 64-bit converted strlen is saved in a local variable, and that variable is passed to ast_websocket_write() instead. Note that this commit message is full of speculation rather than certainty. This is because the observed test failures, while always present in automated test runs, never occur when tests are manually attempted on the same test agent. The idea behind this commit is to fix a theoretical issue by performing changes that should, at the least, cause no harm. If it turns out that this change does not fix the failing tests, then this commit should be reverted. Change-Id: I4458dd87d785ca322b89c152b223a540a3d23e67	10 years ago
Ashley Sanders	fe804b09b3	ARI: Channels added to Stasis application during WebSocket creation ... ... Prior to ASTERISK-24988, the WebSocket handshake was resolved before Stasis applications were registered. This was done such that the WebSocket would be ready when an application is registered. However, by creating the WebSocket first, the client had the ability to make requests for the Stasis application it thought had been created with the initial handshake request. The inevitable conclusion of this scenario was the cart being put before the horse. ASTERISK-24988 resolved half of the problem by ensuring that the applications were created and registered with Stasis prior to completing the handshake with the client. While this meant that Stasis was ready when the client received the green-light from Asterisk, it also meant that the WebSocket was not yet ready for Stasis to dispatch messages. This patch introduces a message queuing mechanism for delaying messages from Stasis applications while the WebSocket is being constructed. When the ARI event processor receives the message from the WebSocket that it is being created, the event processor instantiates an event session which contains a message queue. It then tries to create and register the requested applications with Stasis. Messages that are dispatched from Stasis between this point and the point at which the event processor is notified the WebSocket is ready, are stashed in the queue. Once the WebSocket has been built, the queue's messages are dispatched in the order in which they were originally received and the queue is concurrently cleared. ASTERISK-25181 #close Reported By: Matt Jordan Change-Id: Iafef7b85a2e0bf78c114db4c87ffc3d16d671a17	10 years ago
Matt Jordan	4a58261694	git migration: Refactor the ASTERISK_FILE_VERSION macro ... Git does not support the ability to replace a token with a version string during check-in. While it does have support for replacing a token on clone, this is somewhat sub-optimal: the token is replaced with the object hash, which is not particularly easy for human consumption. What's more, in practice, the source file version was often not terribly useful. Generally, when triaging bugs, the overall version of Asterisk is far more useful than an individual SVN version of a file. As a result, this patch removes Asterisk's support for showing source file versions. Specifically, it does the following: * Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and remove passing the version in with the macro. Other facilities than 'core show file version' make use of the file names, such as setting a debug level only on a specific file. As such, the act of registering source files with the Asterisk core still has use. The macro rename now reflects the new macro purpose. * main/asterisk: - Refactor the file_version structure to reflect that it no longer tracks a version field. - Remove the "core show file version" CLI command. Without the file version, it is no longer useful. - Remove the ast_file_version_find function. The file version is no longer tracked. - Rename ast_register_file_version/ast_unregister_file_version to ast_register_file/ast_unregister_file, respectively. * main/manager: Remove value from the Version key of the ModuleCheck Action. The actual key itself has not been removed, as doing so would absolutely constitute a backwards incompatible change. However, since the file version is no longer tracked, there is no need to attempt to include it in the Version key. * UPGRADE: Add notes for: - Modification to the ModuleCheck AMI Action - Removal of the "core show file version" CLI command Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e	11 years ago
Kevin Harwell	cc85e55d88	ari_websockets: removed extra check on websocket session read ... When merging the websocket timeout issue (ASTERISK-24701) an extra, almost duplicate, check was left in the code that should not have been. This removes it. ASTERISK-24701 #close Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/4412/ ........ Merged revisions 431693 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431695 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	137c4b0778	res_http_websocket: websocket write timeout fails to fully disconnect ... When writing to a websocket if a timeout occurred the underlying socket did not get closed/disconnected. This patch makes sure the websocket gets disconnected on a write timeout. Also a notice is logged stating that the websocket was disconnected. ASTERISK-24701 #close Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/4412/ ........ Merged revisions 431669 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 431670 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431671 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	365ae7523b	res_http_websocket: Close websocket correctly and use careful fwrite ... When a client takes a long time to process information received from Asterisk, a write operation using fwrite may fail to write all information. This causes the underlying file stream to be in an unknown state, such that the socket must be disconnected. Unfortunately, there are two problems with this in Asterisk's existing websocket code: 1. Periodically, during the read loop, Asterisk must write to the connected websocket to respond to pings. As such, Asterisk maintains a reference to the session during the loop. When ast_http_websocket_write fails, it may cause the session to decrement its ref count, but this in and of itself does not break the read loop. The read loop's write, on the other hand, does not break the loop if it fails. This causes the socket to get in a 'stuck' state, preventing the client from reconnecting to the server. 2. More importantly, however, is that the fwrite in ast_http_websocket_write fails with a large volume of data when the client takes awhile to process the information. When it does fail, it fails writing only a portion of the bytes. With some debugging, it was shown that this was failing in a similar fashion to ASTERISK-12767. Switching this over to ast_careful_fwrite with a long enough timeout solved the problem. Note that this version of the patch, unlike r417310 in Asterisk 11, exposes configuration options beyond just chan_sip's sip.conf. Configuration options to configure the write timeout have also been added to pjsip.conf and ari.conf. #ASTERISK-23917 #close Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/3624/ ........ Merged revisions 417310 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 417311 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417317 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	9a85fc0aa0	ARI: Add debug logging for events and responses ... This adds DEBUG level logging for ARI websocket events and HTTP responses similar to what is available for AMI. Logging for ARI HTTP requests is already adequate for debugging purposes. ........ Merged revisions 412565 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412566 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	9bed50db41	optional_api: Fix linking problems between modules that export global symbols ... With the new work in Asterisk 12, there are some uses of the optional_api that are prone to failure. The details are rather involved, and captured on [the wiki][1]. This patch addresses the issue by removing almost all of the magic from the optional API implementation. Instead of relying on weak symbol resolution, a new optional_api.c module was added to Asterisk core. For modules providing an optional API, the pointer to the implementation function is registered with the core. For modules that use an optional API, a pointer to a stub function, along with a optional_ref function pointer are registered with the core. The optional_ref function pointers is set to the implementation function when it's provided, or the stub function when it's now. Since the implementation no longer relies on magic, it is now supported on all platforms. In the spirit of choice, an OPTIONAL_API flag was added, so we can disable the optional_api if needed (maybe it's buggy on some bizarre platform I haven't tested on) The AST_OPTIONAL_API*() macros themselves remained unchanged, so existing code could remain unchanged. But to help with debugging the optional_api, the patch limits the #include of optional API's to just the modules using the API. This also reduces resource waste maintaining optional_ref pointers that aren't used. Other changes made as a part of this patch: * The stubs for http_websocket that wrap system calls set errno to ENOSYS. * res_http_websocket now properly increments module use count. * In loader.c, the while() wrappers around dlclose() were removed. The while(!dlclose()) is actually an anti-pattern, which can lead to infinite loops if the module you're attempting to unload exports a symbol that was directly linked to. * The special handling of nonoptreq on systems without weak symbol support was removed, since we no longer rely on weak symbols for optional_api. [1]: https://wiki.asterisk.org/wiki/x/wACUAQ (closes issue ASTERISK-22296) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2797/ ........ Merged revisions 397989 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397990 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	10c91bc96e	Address JSON thread safety issues. ... In tracking down some unit tests failures, I ended up reading the fine print[1] regarding Jansson's thread safety. In short: 1. Ref-counting is non-atomic. 2. json_dumps() and friends are not thread safe. This patch adds locking where necessary to our ast_json_* wrapper API, with documentation in json.h describing the thread safety limitations of the API. [1]: http://www.digip.org/jansson/doc/2.4/portability.html#thread-safety Review: https://reviewboard.asterisk.org/r/2716/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396119 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	d8956f690e	Rename everything Stasis-HTTP to ARI ... This renames all files and API calls from several variants of Stasis-HTTP to ARI including: * Stasis-HTTP -> ARI * STASIS_HTTP -> ARI * stasis_http -> ari (ast_ari for global symbols, file names as well) * stasis http -> ARI Review: https://reviewboard.asterisk.org/r/2706/ (closes issue ASTERISK-22136) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395603 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago