There are several places in Asterisk that have duplicated logic
for deferring important frames until later.
This commit adds a couple of API calls to facilitate this automatically.
ast_channel_start_defer_frames(): Future reads of deferrable frames on
this channel will be deferred until later.
ast_channel_stop_defer_frames(): Any frames that have been deferred get
requeued onto the channel.
ASTERISK-26343
Change-Id: I3e1b87bc6796f222442fa6f7d1b6a4706fb33641
When a channel is made the video source, the bridge holds a reference to
it. Whenever the video source changes, that reference is released.
However, a ref leak does occur if the channel leaves the bridge (such as
being hung up) while it is the video source, as the bridge never
releases the ref in such a case.
This patch adds a line to the bridge_channel_internal_join routine such
that, when a channel finishes its time in the bridge, it notifies the
bridge via ast_bridge_remove_video_src that if it is a video source its
reference should be released.
ASTERISK-26555 #close
Change-Id: I3a2f5238a9d2fc49c591f0e65199d782ab0be76a
It's actually quite useful to see the source of a video stream change.
This doesn't happen terribly often, even with talk detection - but when
it does, it's nice to know which channel is now providing your video
stream.
As a verbose 5 level message, it shouldn't be terribly spammy or costly
to have, and is 'lower level' then most other verbose messages that the
bridge system emits.
ASTERISK-26555
Change-Id: Ia1c20ecafa9670171fd38bddcf3beccae47fb15c
The readdir_r function has been deprecated and should no longer be used. This
patch removes the readdir_r dependency (replaced it with readdir) and also moves
the directory search code to a more centralized spot (file.c)
Also removed a strict dependency on the dirent structure's d_type field as it
is not portable. The code now checks to see if the value is available. If so,
it tries to use it, but defaults back to using the stats function if necessary.
Lastly, for most implementations of readdir it *should* be thread-safe to make
concurrent calls to it as long as different directory streams are specified.
glibc falls into this category. However, since it is possible that there exist
some implementations that are not safe, locking has been added for those other
than glibc.
ASTERISK-26412
ASTERISK-26509 #close
Change-Id: Id8f54689b1e2873e82a09d0d0d2faf41964e80ba
Since adding all remaining rates of Signed Linear (ASTERISK-24274) and SILK
(Gerrit 3136), only one RTP Payload Type is left in the dynamic range (96-127).
RFC 3551 section 3 allows to reassign other ranges. Consequently, when the
dynamic range is exhausted, you can go for "rtp_pt_dynamic = 35" (or 0) in
asterisk.conf. This enables the range 35-63 (or 0-63) giving room for another
29 (or 64) payload types.
ASTERISK-26311 #close
Change-Id: I7bc96ab764bc30098a178b841cbf7146f9d64964
The NewConnectedLine event has been added by commit fe7671f, but the
documentation was missing.
ASTERISK-26537 #close
Change-Id: I7fc331f18caa28492da9303e576f70884ca8c9e6
Every ao2 object contains storage for a private variable data_size,
though the value is never read if AO2_DEBUG is disabled. This change
makes the variable conditional, reducing memory usage.
ASTERISK-26524 #close
Change-Id: If859929e507676ebc58b0f84247a4231e11da07f
main/Makefile includes third-party/pjproject/build.mak but
doesn't set PJDIR beforehand so "include $(PJDIR)/version.mak"
evaluates to "/version.mak". Fix is to set PJDIR in main/Makefile
before the include.
Change-Id: I0f7c67d60209049056fe9c4b041bf0463aa95604
It is only safe to run ast_register_cleanup callbacks when all modules
have been unloaded. Previously these callbacks were run during graceful
shutdown, making it possible to crash during shutdown.
ASTERISK-26513 #close
Change-Id: Ibfa635bb688d1227ec54aa211d90d6bd45052e21
ARI and AMI allow for an explicit channel ID to be specified
when originating channels. Unfortunately, there is nothing in
place to prevent someone from using the same ID for multiple
channels. Further complicating things, adding ID validation to channel
allocation makes it impossible for ARI to discern why channel allocation
failed, resulting in a vague error code being returned.
The fix for this is to institute a new method for channel errors to be
discerned. The method mirrors errno, in that when an error occurs, the
caller can consult the channel errno value to determine what the error
was. This initial iteration of the feature only introduces "unknown" and
"channel ID exists" errors. However, it's possible to add more errors as
needed.
ARI uses this feature to determine why channel allocation failed and can
return a 409 error during origination to show that a channel with the
given ID already exists.
ASTERISK-26421
Change-Id: Ibba7ae68842dab6df0c2e9c45559208bc89d3d06
CDRs form chains. When the root of the chain is destroyed, it then
unreferences the next CDR in the chain. That CDR is destroyed, and it
then unreferences the next CDR in the chain. This repeats until the end
of the chain is reached. While this typically does not cause any sort of
problems, it is possible in strange scenarios for the CDR chain to grow
way longer than expected. In such a scenario, the destruction pattern
can result in a stack overflow.
This patch fixes the problem by switching from a recursive pattern to an
iterative pattern for destruction. When the root CDR is destroyed, it is
responsible for iterating over the rest of the CDRs and unreferencing
each one. Other CDRs in the chain, since they are not the root, will
simply destroy themselves and be done. This causes the stack depth not
to increase.
ASTERISK-26421 #close
Reported by Andrew Nagy
Change-Id: I3ca90c2b8051f3b7ead2e0e43f60d2c18fb204b8
Since Asterisk 1.8, the command "core set debug" on the command-line interface
asks not for a file (.c) but a module name. This change shows modules (.so) on
the auto-completion via a tabulator or the question mark. Now, when you
partially type a module name, TAB or ?, you get the correct candidiates.
ASTERISK-26480
Change-Id: I1213f1dd409bd4ff8de08ad80cb0c73cafb1bae0
ast_set_default_eid was searching for ethX, emX, enoX, ensX and even
pciD#U interface names. While this was a good attempt, it wasn't
inclusive enough to capture interfaces like enp6s0 or ens6d1, etc.
Rather than relying on interface names, we now simply find the first
interface returned by the OS that has a hardware address and that
address isn't all 0x00 or all 0xff. The code IS different for BSD,
Solaris and Linux based on what method is available for enumerating
interfaces.
Tested on:
FreeBSD9
CentOS6
Ubuntu14
Fedora24
I was unable to test on Solaris at this time but the code for Solaris
is used elsewhere at Digium.
Change-Id: Iaa6db87ca78a9a375e47d70e043ae08c1448cb72
Added needed UTF-8 checks before constructing json objects in various
files for strings obtained outside the system. In this case string values
from a channel driver's peer and not from the user setting channel
variables.
* aoc.c: Fixed type mismatch in s_to_json() for time and granularity json
object construction.
ASTERISK-26466
Reported by: Richard Mudgett
Change-Id: Iac2d867fa598daba5c5dbc619b5464625a7f2096
* Updated unit test as ast_json_name_number() is now NULL tolerant.
ASTERISK-26466 #close
Reported by: Richard Mudgett
Change-Id: I7d4e14194f8f81f24a1dc34d1b8602c0950265a6
Since the json library does not make the check function public we
recreate/copy the function in our interface module.
ASTERISK-26466
Reported by: Richard Mudgett
Change-Id: I36d3d750b6f5f1a110bc69ea92b435ecdeeb2a99
* In s_to_json() removed unnecessary ast_json_ref() to ast_json_null()
when creating the type json object. The ref is a noop.
Change-Id: I2be8b836876fc2e34a27c161f8b1c53b58a3889a
The main frame read and write handlers in main/channel.c don't use the
optimum placement in the processing flow for calling audiohooks
callbacks, as far as codec translation is concerned. This change places
the audiohooks callback code:
* After the channel read translation if the frame is not linear before
the translation, thereby increasing the chance that the frame is linear
as required by audiohooks
* Before the channel write translation if the frame is linear at this
point
This prevents the audiohooks code from instantiating additional
translation paths to/from linear where a linear frame format is already
available, saving valuable CPU cycles
ASTERISK-26419
Change-Id: I6edd5771f0740e758e7eb42558b953f046c01f8f
Remote asterisk consoles should only display verbose log messages
created by the daemon. The first patch for ASTERISK-26410 caused
a couple verbose messages to be printed when the rasterisk process
ended.
ASTERISK-26410
Change-Id: Ie2a1bb3753ad2724c0349ec1a336f52f7117b52a
* Compile __ast_assert_failed unconditionally.
* Use __ast_assert_failed to log messages from log_bad_ao2
* Remove calls to ast_assert(0) that happen after log_bad_ao2 was run.
Change-Id: I48f1af44b2718ad74a421ff75cb6397b924a9751
Verbose messages should be printed to the console if the sublevel is
less than option_verbose. This fix ensures the welcome message with
copyright and license are printed at daemon and interactive rasterisk
startup.
ASTERISK-26410 #close
Change-Id: Ia44235e30ec328aba92ea2c8a837b094e65c9a03
Users upgrading from asterisk 13.5 to a later version and who use
realtime with peers that have mailboxes were experiencing runaway
situations that manifested as a continuous stream of taskprocessor
congestion errors, memory leaks and an unresponsive chan_sip.
A related issue was that setting rtcachefriends=no NEVER worked in
asterisk 13 (since the move to stasis). In 13.5 and earlier, when a
peer tried to register, all of the stasis threads would block and
chan_sip would again become unresponsive. After 13.5, the runaway
would happen.
There were a number of causes...
* mwi_event_cb was (indirectly) calling build_peer even though calls to
mwi_event_cb are often caused by build_peer.
* In an effort to prevent chan_sip from being unloaded while messages
were still in flight, destroy_mailboxes was calling
stasis_unsubscribe_and_join but in some cases waited forever for the
final message.
* add_peer_mailboxes wasn't properly marking the existing mailboxes
on a peer as "keep" so build_peer would always delete them all.
* add_peer_mwi_subs was unsubscribing existing mailbox subscriptions
then just creating them again.
All of this was causing a flood of subscribes and unsubscribes on
multiple threads all for the same peer and mailbox.
Fixes...
* add_peer_mailboxes now marks mailboxes correctly and build_peer only
deletes the ones that really are no longer needed by the peer.
* add_peer_mwi_subs now only adds subscriptions marked as "new" instead
of unsubscribing and resubscribing everything. It also adds the peer
object's address to the mailbox instead of its name to the subscription
userdata so mwi_event_cb doesn't have to call build_peer.
With these changes, with rtcachefriends=yes (the most common setting),
there are no leaks, locks, loops or crashes at shutdown.
rtcachefriends=no still causes leaks but at least it doesn't lock, loop
or crash. Since making rtcachefriends=no work wasnt in scope for this
issue, further work will have to be deferred to a separate patch.
Side fixes...
* The ast_lock_track structure had a member named "thread" which gdb
doesn't like since it conflicts with it's "thread" command. That
member was renamed to "thread_id".
ASTERISK-25468 #close
Change-Id: I07519ef7f092629e1e844f855abd279d6475cdd0
When retrieving presence state information there is no
guarantee that the subtype and message passed in are
set to NULL. This change ensures they are.
ASTERISK-26397 #close
Change-Id: If38cd730e409e9a9b6eb9adef6591d15a9e61f86
Routines responsible for managing ast_callid's are overly complicated.
This is left-over code from when ast_callid was an AO2 object. Now that
it is an integer the code can be reduced.
ast_callid handler code no longer prints it's own error message upon failure
to allocate threadstorage as ast_calloc would have already printed a
message. Debug messages that were printed when TEST_FRAMEWORK was
enabled have been also been removed.
Change-Id: I65a768a78dc6cf3cfa071e97f33ce3dce280258e
Previous versions of Asterisk did not require verbose to be specified in
logger.conf for the console channel, if it was requested by command line
or asterisk.conf it just worked. This change causes Asterisk to always
enable verbose in the console channel level mask. Verbose is displayed
on consoles if requested by command line, option_verbose or 'core set
verbose'.
This also delays initialization of the logger until after threadstorage
is initialized. Initializing too early can cause messages to be printed
multiple times to the console (stdout).
ASTERISK-26391 #close
Change-Id: I52187d67c2fcb3efd5561bf04b3e5e23e5ee8a04
When logger.conf is missing or invalid we should be printing notices,
warnings and errors to the console. The logmask was incorrectly
calculated.
Change-Id: Ibaa9465a8682854bc1a5e9ba07079bea1bfb6bb3
sd_notify() is used to notify systemd of changes to the status of the
process. This allows the systemd daemon to know when the process
finished loading (and thus only start another program after Asterisk has
finished loading).
To use this, use a systemd unit with 'Type=notify' for Asterisk.
This commit also adds the function ast_sd_notify(), a wrapper around
sd_notify that does nothing if not built with systemd support.
Also adds support for libsystemd detection in the configure script.
Change-Id: Ied6a59dafd5ef331c5c7ae8f3ccd2dfc94be7811
(cherry picked from commit 07b95f7c65)
Without this change, a 'core restart' would kill the astcanary forever
if you're not running as root. Both with and without this patch, the
scheduling priority was still SCHED_RR after restart.
Additionally, the astcanary is now spawned if you start with high
priority and Asterisk doesn't get a chance to lower it. For example
through: `chrt -r 10 sudo -u asterisk asterisk -c`
Also reap killed astcanary processes on core restart.
ASTERISK-26352 #close
Change-Id: Iacb49f26491a0717084ad46ed96b0bea5f627a55
Previously only the canary checking thread itself had its priority set
to SCHED_OTHER. Now all threads are traversed and adjusted.
ASTERISK-19867 #close
Reported by: Xavier Hienne
Change-Id: Ie0dd02a3ec42f66a78303e9c1aac28f7ed9aae39
If sysinfo() is available, but not sysctl() or swapctl() the
printing code for swap buffer sizes is incorrectly omitted.
The above condition happens with musl c-library.
Fix #if rule to consider defined(HAVE_SYSINFO). And also
remove the redundant || defined(HAVE_SYSCTL) which was
incorrectly there to start with. Now swap information is
displayed only if an actual libc function to get it is
available.
This also fixes warnings previously seen with musl libc:
[CC] asterisk.c -> asterisk.o
asterisk.c: In function 'handle_show_sysinfo':
asterisk.c:773:6: warning: variable 'totalswap' set but not used
[-Wunused-but-set-variable]
int totalswap = 0;
^~~~~~~~~
asterisk.c:770:11: warning: variable 'freeswap' set but not used
[-Wunused-but-set-variable]
uint64_t freeswap = 0;
^~~~~~~~
Change-Id: I1fb21dad8f27e416c60f138c6f2bff03fb626eca
When receiving an SDP offer with multiple payloads for
the same format we would generate an answer with the first
payload, but during the payload crossover operation
(to set the payloads for receiving) we would remove all
payloads but the last. This would result in incoming
traffic being matched against the wrong format and outgoing
traffic being sent using the wrong payload.
This change makes it so that once a format has a payload
number put into the mapping all subsequent ones are ignored.
This ensures there is only ever one payload in the mapping
and that it is the payload placed into the answer SDP.
ASTERISK-26365 #close
Change-Id: I1e8150860a3518cab36d00b1fab50f9352b64e60
Currently when receiving video over RTP we store only
a calculated samples on the frame. When starting the video
it can take some time for this calculation to actually yield
a value as it requires constant changing timestamps. As well
if a video frame passes over multiple RTP packets this calculation
will fail as the timestamp is the same as the previous RTP
packet and the number of samples calculated will be 0.
This change preserves the timestamp on the frame and allows
it to pass through the core. When sending the video this timestamp
is used instead of a new one being calculated.
ASTERISK-26367 #close
Change-Id: Iba8179fb5c14c9443aee4baf670d2185da3ecfbd
Create an alternative to ast_sorcery_generic_alloc which uses astobj2
shared locking. Use this new method for the 'struct ast_sip_aor' allocator.
Change-Id: I3f62f2ada64b622571950278fbb6ad57395b5d6f
This allows standard ao2 functions to be used to release references to
an ast_named_lock. This change can cause less frequent locking of the
global named_locks container. The container is no longer locked when a
named_lock reference is being release except when this causes the
named_lock to be destroyed.
Change-Id: I644e39c6d83a153d71b3fae77ec05599d725e7e6
Previously, if context A was including context B and context B was including
context A, i.e. if there was a circular dependency between contexts, then
calling manager_show_dialplan_helper could lead to an infinite recursion,
resulting in a crash.
This commit applies the same solution as the one implemented in the
show_dialplan_helper function. The manager_show_dialplan_helper and
show_dialplan_helper functions contain lots of code in common, but the former
was missing the "infinite recursion avoidance" code.
ASTERISK-26226 #close
Change-Id: I1aea85133c21787226f4f8442253a93000aa0897
In your Diaplan, if you specify
same => n,Set(CHANNEL(secure_bridge_media)=1)
same => n,Set(CHANNEL(secure_bridge_signaling)=1)
only the SIP channel driver chan_sip supports this. All other channels drivers
like res_pjsip fail. In case of failure, the original sRTP source code released
the whole channel, even if not hung-up, yet. This change does not release the
channel but instead hangs-up the channel.
ASTERISK-26306
Change-Id: I0489f0cb660fab6673b0db8af027d116e70a66db
MALLOC_DEBUG should not be used to check if debugging is actually
enabled, __AST_DEBUG_MALLOC should be used instead. MALLOC_DEBUG only
indicates that debugging is requested, __AST_DEBUG_MALLOC indicates it
is active.
Change-Id: I3ce9cdb6ec91b74ee1302941328462231be1ea53
updated the uri handler to include the url prefix of the http server
this enables res_ari to add it to the uris when generating docs
Change-Id: I279335a2625261a8492206c37219698f42591c2e
(cherry picked from commit 6f448f32fe)
This updates func_channel.c and main/message.c to use a generic xpointer
include instead of including info from each channel driver. Now the
name attribute of info is CHANNEL or CHANNEL_EXAMPLES to be included in
documentation for func_channel. Setting the name attribute of info to
MessageToInfo or MessageFromInfo causes it to be included in the
MessageSend application and AMI action.
Change-Id: I89fd8276a3250824241a618009714267d3a8d1ea
The Exchanging Device and Mailbox States could not working
if the Entity ID (EID) is not set manually and can't be obtained
from ethernet interface.
This patch replaces debug message to warning
and addes missing description about option 'entityid' to
asterisk.conf.sample.
With this patch the asterisk also:
(1) decline loading the modules which won't work without EID:
res_corosync and res_pjsip_publish_asterisk.
(2) warn if EID is empty on loading next modules:
pbx_dundi, res_xmpp
Starting with v197 systemd/udev will automatically assign "predictable"
names for all local Ethernet interfaces.
This patch also addes some new ethernet prefixes "eno" and "ens".
ASTERISK-26164 #close
Change-Id: I72d712f1ad5b6f64571bb179c5cb12461e7c58c6
* Remove some unused parameters from internal functions:
sorcery_wizard_create()
sorcery_wizard_update()
sorcery_wizard_delete()
* Created the struct sorcery_observer_invocation ao2 object without a lock
since it is not needed in sorcery_observer_invocation_alloc().
* Cleanup generic ao2 container sorcery object id hash, sort, and cmp
functions.
Change-Id: Iff71d75f52bc1b8cee955456838c149faaa4f92e
Do not check registrar of the first extension head. We should only check
the registrar when we match the priority.
Additionally fix a couple calls to strcmp which used the input callerid
instead of the clean version ex.cidmatch.
ASTERISK-26233
Change-Id: I17ea6881a18f40840ae9c1f5394aab1fbb3769f1
This patch adds some see-also references between related AMI events. It
focuses primarily on those events that are guaranteed to come in pairs,
such as DTMFBegin/DTMFEnd, as well as those that occur during the life
cycle of an Asterisk channel, such as Newchannel/Hangup.
Change-Id: Iaab600477052018d0f8c03d0c624c0856e9ff1f3
Errors during startup result in an exit. These error branches should be
calling ast_run_atexit(0) to ensure mandatory cleanup is run.
ASTERISK-26267 #close
Change-Id: If226f2326ae2df7add20040696132214cf2bb680
* The high water check in ast_taskprocessor_alert_set_levels() would
trigger immediately if the new high water level is zero and the queue was
empty.
* The high water check in taskprocessor_push() was off by one.
Change-Id: I687729fb4efa6a0ba38ec9c1c133c4d407bc3d5d
The named aor lock was always being locked for writes so a rwlock adds no
benefit and may be slower because rwlocks are biased toward read locking.
Change-Id: I8c5c2c780eb30ce5441832257beeb3506fd12b28
The non-module libs libasteriskssl.dylib and libasteriskpj.dylib have
long been missing the AST_NOT_MODULE compile flag. This was mostly
okay, until a recent fix to improve compiler warnings when the
AST_MODULE_SELF_SYM is missing broke the build on OS X/macOS/whatever
they are calling it these days.
Change-Id: I2cb51c890824f001280a5114f2e775f97c163516
A patch made to the master branch (Now the 14 branch) inadvertently made
libsrtp a required dependency in order to compile Asterisk. Rather than
create dummy defines to substitute for the defines supplied by libsrtp
when libsrtp is not available, most of the code in sdp_srtp.c is moved
into res_srtp.c. This gets more code out of Asterisk's core that isn't
used when SRTP is not available. This also makes another inadvertent
required dependency on libsrtp by Asterisk's core unlikely.
ASTERISK-26253 #close
Reported by: Ben Merrills
Change-Id: I0a46cde81501c0405399c2588633ae32706d1ee7
If both channels which should be masqueraded
are in the same serializer:
1st channel will be locked waiting condition 'complete'
2nd channel will be locked waiting condition 'suspended'
On heavy load system a chance that both channels will be in
the same serializer 'pjsip/distibutor' is very high.
To reproduce compile res_pjsip/pjsip_distributor.c with
DISTRIBUTOR_POOL_SIZE=1
Steps to reproduce:
1. Party A calls Party B (bridged call 'AB')
2. Party B places Party A on hold
3. Party B calls Voicemail app (non-bridged call 'BV')
4. Party B attended transfers Party A to voicemail using REFER.
5. When asterisk masquerades calls 'AB' and 'BV',
a deadlock is happened.
This patch adds a suspension indicator to the taskprocessor.
When a session suspends/unsuspends the serializer
it sets the indicator to the appropriate state.
The session checks the suspension indicator before
suspend the serializer.
ASTERISK-26145 #close
Change-Id: Iaaebee60013a58c942ba47b1b4930a63e686663b
Modules must define AST_MODULE_SELF_SYM to be used as the name of a
generated function. This produces a friendly error when it's not
defined.
ASTERISK-26278 #close
Change-Id: Ib9d35a08104529c516d636771365e02c6e77a45b
This ensures startup is canceled due to allocation failures from the
following initializations.
* channel.c: ast_channels_init
* config_options.c: aco_init
ASTERISK-26265 #close
Change-Id: I911ed08fa2a3be35de55903e0225957bcdbe9611
Mark Michelson
Joshua Colp
Matt Jordan
Kevin Harwell
Alexander Traud
Tzafrir Cohen
Etienne Lessard
Corey Farrell
George Joseph
Pascal Cadotte Michaud
snuffy
zuul
Richard Mudgett
Michael Walton
Walter Doekes
Timo Teräs
Torrey Searle
Alexei Gradinari
David M. Lee