814 Commits (8d22e7e6cfebc730b1df73471b58facdfbcc89e7)

Author	SHA1	Message	Date
Jenkins2	4dbc070013	Merge "Fix GCC 8 build issues." into 15	8 years ago
Corey Farrell	d4e69edbdd	Fix GCC 8 build issues. ... This fixes build warnings found by GCC 8. In some cases format truncation is intentional so the warning is just suppressed. ASTERISK-27824 #close Change-Id: I724f146cbddba8b86619d4c4a9931ee877995c84	8 years ago
Joshua Colp	228bc1890b	pjsip: Rewrite OPTIONS support with new eyes. ... The OPTIONS support in PJSIP has organically grown, like many things in Asterisk. It has been tweaked, changed, and adapted based on situations run into. Unfortunately this has taken its toll. Configuration file based objects have poor performance and even dynamic ones aren't that great. This change scraps the existing code and starts fresh with new eyes. It leverages all of the APIs made available such as sorcery observers and serializers to provide a better implementation. 1. The state of contacts, AORs, and endpoints relevant to the qualify process is maintained. This state can be updated by external forces (such as a device registering/unregistering) and also the reload process. This state also includes the association between endpoints and AORs. 2. AORs are scheduled and not contacts. This reduces the amount of work spent juggling scheduled items. 3. Manipulation of which AORs are being qualified and the endpoint states all occur within a serializer to reduce the conflict that can occur with multiple threads attempting to modify things. 4. Operations regarding an AOR use a serializer specific to that AOR. 5. AORs and endpoint state act as state compositors. They take input from lower level objects (contacts feed AORs, AORs feed endpoint state) and determine if a sufficient enough change has occurred to be fed further up the chain. 6. Realtime is supported by using observers to know when a contact has been registered. If state does not exist for the associated AOR then it is retrieved and becomes active as appropriate. The end result of all of this is best shown with a configuration file of 3000 endpoints each with an AOR that has a static contact. In the old code it would take over a minute to load and use all 8 of my cores. This new code takes 2-3 seconds and barely touches the CPU even while dealing with all of the OPTIONS requests. ASTERISK-26806 Change-Id: I6a5ebbfca9001dfe933eaeac4d3babd8d2e6f082	8 years ago
George Joseph	8cca1501a6	bridge_softmix: Forward TEXT frames ... Core bridging and, more specifically, bridge_softmix have been enhanced to relay received frames of type TEXT or TEXT_DATA to all participants in a softmix bridge. res_pjsip_messaging and chan_pjsip have been enhanced to take advantage of this so when res_pjsip_messaging receives an in-dialog MESSAGE message from a user in a conference call, it's relayed to all other participants in the call. res_pjsip_messaging already queues TEXT frames to the channel when it receives an in-dialog MESSAGE from an endpoint and chan_pjsip will send an MESSAGE when it gets a TEXT frame. On a normal point-to-point call, the frames are forwarded between the two correctly. bridge_softmix was not though so messages weren't getting forwarded to conference bridge participants. Even if they were, the bridging code had no way to tell the participants who sent the message so it would look like it came from the bridge itself. * The TEXT frame type doesn't allow storage of any meta data, such as sender, on the frame so a new TEXT_DATA frame type was added that uses the new ast_msg_data structure as its payload. A channel driver can queue a frame of that type when it receives a message from outside. A channel driver can use it for sending messages by implementing the new send_text_data channel tech callback and setting the new AST_CHAN_TP_SEND_TEXT_DATA flag in its tech properties. If set, the bridging/channel core will use it instead of the original send_text callback and it will get the ast_msg_data structure. Channel drivers aren't required to implement this. Even if a TEXT_DATA enabled driver uses it for incoming messages, an outgoing channel driver that doesn't will still have it's send_text callback called with only the message text just as before. * res_pjsip_messaging now creates a TEXT_DATA frame for incoming in-dialog messages and sets the "from" to the display name in the "From" header, or if that's empty, the caller id name from the channel. This allows the chat client user to set a friendly name for the chat. * bridge_softmix now forwards TEXT and TEXT_DATA frames to all participants (except the sender). * A new function "ast_sendtext_data" was added to channel which takes an ast_msg_data structure and calls a channel's send_text_data callback, or if that's not defined, the original send_text callback. * bridge_channel now calls ast_sendtext_data for TEXT_DATA frame types and ast_sendtext for TEXT frame types. * chan_pjsip now uses the "from" name in the ast_msg_data structure (if it exists) to set the "From" header display name on outgoing text messages. Change-Id: Idacf5900bfd5f22ab8cd235aa56dfad090d18489	8 years ago
Ivan Poddubny	cb6bc25632	func_channel: Delete dead CHANNEL_TRACE code ... The functions behind the flag and the flag itself were removed from Asterisk 12 as incompatible with the new architecture. Change-Id: I058493ef7a53ee290fd225bbcbb07bf46b623ccf	8 years ago
Alexander Traud	95354e3996	BuildSystem: Depend not implicitly but explicitly on external libraries. ... ASTERISK-27722 Change-Id: Ie7b8c30d86cb00a54d6ac4e09e6f28f42d2bd52c	8 years ago
Sean Bright	9d60fc6298	modules: Set deprecated modules to not build by default ... Change-Id: I09090f70224866aead6b3207fa784cfefea7d539	8 years ago
Corey Farrell	3eb72a857b	func_odbc: Add missing unlock's to acf_odbc_read. ... Change-Id: I828329ecbd252ae8f27a369a046d2b03102b07c6	8 years ago
Richard Mudgett	03a73a2e94	func_channel.c: Update MASTER_CHANNEL documentation ... Be more explicit in what is meant by the master channel to eliminate misunderstanding. ASTERISK-23133 Change-Id: I453bcaf4b99404a5a3e345dbf093ac6c1afcfc72	8 years ago
Sean Bright	b64c02e414	Remove as much trailing whitespace as possible. ... Change-Id: I873c1c6d00f447269bd841494459efccdd2c19c0	8 years ago
Corey Farrell	5ae6098f7e	func_callerid: Initialize app argument structures. ... This module uses AST_DEFINE_APP_ARGS_TYPE to define struct's instead of directly using AST_DECLARE_APP_ARGS. Initialize the variables declared in this way. Change-Id: If97fbdd8d63a204e2efd498a192effc14e90fb31	8 years ago
Richard Mudgett	cf741d5de3	CDR: Fix deadlock setting some CDR values. ... Setting channel variables with the AMI Originate action caused a deadlock when you set CDR(amaflags) or CDR(accountcode). This path has the channel locked when the CDR function is called. The CDR function then synchronously passes the job to a stasis thread. The stasis handling function then attempts to lock the channel. Deadlock results. * Avoid deadlock by making the CDR function handle setting amaflags and accountcode directly on the channel rather than passing it off to the CDR processing code under a stasis thread to do it. * Made the CHANNEL function and the CDR function process amaflags the same way. * Fixed referencing the wrong message type in cdr_prop_write(). ASTERISK-27460 Change-Id: I5eacb47586bc0b8f8ff76a19bd92d1dc38b75e8f	8 years ago
Joshua Colp	6f93ee230a	Merge "Add missing menuselect dependencies." into 15	8 years ago
Corey Farrell	9897675b35	Add missing menuselect dependencies. ... This adds menuselect dependencies for modules that use symbols of other modules. ASTERISK-27390 Change-Id: Ia2d2849f5b87a72af7324a82edc3f283eafb5385	8 years ago
Corey Farrell	ec92451748	Prevent unload of modules which implement an Optional API. ... Once an Optional API module is loaded it should stay loaded. Unloading an optional API module runs the risk of a crash if something else is using it. This patch causes all optional API providers to tell the module loader not to unload except at shutdown. ASTERISK-27389 Change-Id: Ia07786fe655681aec49cc8d3d96e06483b11f5e6	8 years ago
Joshua Colp	693c06f8a3	bridge: Change participant SFU streams when source streams change. ... Some endpoints do not like a stream being reused for a new media stream. The frame/jitterbuffer can rely on underlying attributes of the media stream in order to order the packets. When a new stream takes its place without any notice the buffer can get confused and the media ends up getting dropped. This change uses the SSRC change to determine that a new source is reusing an existing stream and then bridge_softmix renegotiates each participant such that they see a new media stream. This causes the frame/jitterbuffer to start fresh and work as expected. ASTERISK-27277 Change-Id: I30ccbdba16ca073d7f31e0e59ab778c153afae07	8 years ago
Jacek Konieczny	64f8445c0b	func_cdr: honour 'u' flag on dummy channel ... Fixes ${CDR(...,u)} when used in cdr_custom.conf ASTERISK-27165 #close Change-Id: Ia4e0b6ba93e03d27886354c279737790e2cd6a83	9 years ago
Corey Farrell	0372157a48	AST-2017-006: Fix app_minivm application MinivmNotify command injection ... An admin can configure app_minivm with an externnotify program to be run when a voicemail is received. The app_minivm application MinivmNotify uses ast_safe_system() for this purpose which is vulnerable to command injection since the Caller-ID name and number values given to externnotify can come from an external untrusted source. * Add ast_safe_execvp() function. This gives modules the ability to run external commands with greater safety compared to ast_safe_system(). Specifically when some parameters are filled by untrusted sources the new function does not allow malicious input to break argument encoding. This may be of particular concern where CALLERID(name) or CALLERID(num) may be used as a parameter to a script run by ast_safe_system() which could potentially allow arbitrary command execution. * Changed app_minivm.c:run_externnotify() to use the new ast_safe_execvp() instead of ast_safe_system() to avoid command injection. * Document code injection potential from untrusted data sources for other shell commands that are under user control. ASTERISK-27103 Change-Id: I7552472247a84cde24e1358aaf64af160107aef1	9 years ago
Joshua Colp	4146facfec	func_cdr: Allow empty value for CDR dialplan function. ... A regression was introduced in 12 where passing an empty value to the CDR dialplan function was not longer allowed. This change returns to the behavior of 11 where it is permitted. ASTERISK-26173 Change-Id: I3f148203b54ec088007e29e30005a5de122e51c5	9 years ago
George Joseph	747beb1ed1	modules: change module LOAD_FAILUREs to LOAD_DECLINES ... In all non-pbx modules, AST_MODULE_LOAD_FAILURE has been changed to AST_MODULE_LOAD_DECLINE. This prevents asterisk from exiting if a module can't be loaded. If the user wishes to retain the FAILURE behavior for a specific module, they can use the "require" or "preload-require" keyword in modules.conf. A new API was added to logger: ast_is_logger_initialized(). This allows asterisk.c/check_init() to print to the error log once the logger subsystem is ready instead of just to stdout. If something does fail before the logger is initialized, we now print to stderr instead of stdout. Change-Id: I5f4b50623d9b5a6cb7c5624a8c5c1274c13b2b25	9 years ago
Richard Mudgett	8cb4f9cea1	CHANNEL(callid): Give dialplan access to the callid. ... * Added CHANNEL(callid) to retrieve the call identifier log tag associated with the channel. Dialplan now has access to the call log search key associated with the channel so it can be saved in case there is a problem with the call. ASTERISK-26878 Change-Id: I2c97ebd928b6f3c5bc80c5729e4d3c07f453049f	9 years ago
zuul	bcc9a07db2	Merge "funcs/func_devstate: Remove new line in Device field of during module load"	9 years ago
Matt Jordan	0ded269bfa	funcs/func_devstate: Remove new line in Device field of during module load ... During module loading of func_devstate, Asterisk emits the current device state of all Custom device states currently stored in the AstDB. This was erroneously including a new line character ('\n') to the end of the device state, causing two new lines to be emitted in DeviceStateChange AMI events. Note that this only happened for those device state changes that occurred during startup. Regular device state changes for Custom device states are handled elsewhere, and did not have the newline. ASTERISK-26643 #close Reported by: Roman Bedros Tested by: Matt Jordan patches: ami_devstate.diff uploaded by Roman Bedros (License 6842) Change-Id: I1f4c02fc79c448d43bf725f5039c83d9611d7d93	9 years ago
Joshua Colp	3ed05badb9	core: Add stream topology changing primitives with tests. ... This change adds a few things to facilitate stream topology changing: 1. Control frame types have been added for use by the channel driver to notify the application that the channel wants to change the stream topology or that a stream topology change has been accepted. They are also used by the indicate interface to the channel that the application uses to indicate it wants to do the same. 2. Legacy behavior has been adopted in ast_read() such that if a channel requests a stream topology change it is denied automatically and the current stream topology is preserved if the application is not capable of handling streams. Tests have also been written which confirm the multistream and non-multistream behavior. ASTERISK-26839 Change-Id: Ia68ef22bca8e8457265ca4f0f9de600cbcc10bc9	9 years ago
Sean Bright	3f94373778	cli: Fix various CLI documentation and completion issues ... * app_minivm: Use built-in completion facilities to complete optional arguments. * app_voicemail: Use built-in completion facilities to complete optional arguments. * app_confbridge: Add missing colons after 'Usage' text. * chan_alsa: Use built-in completion facilities to complete optional arguments. * chan_sip: Use built-in completion facilities to complete optional arguments. Add completions for 'load' for 'sip show user', 'sip show peer', and 'sip qualify peer.' * chan_skinny: Correct and extend completions for 'skinny reset' and 'skinny show line.' * func_odbc: Correct completions for 'odbc read' and 'odbc write' * main/astmm: Use built-in completion facilities to complete arguments for 'memory' commands. * main/bridge: Correct completions for 'bridge kick.' * main/ccss: Use built-in completion facilities to complete arguments for 'cc cancel' command. * main/cli: Add 'all' completion for 'channel request hangup.' Correct completions for 'core set debug channel.' Correct completions for 'core show calls.' * main/pbx_app: Remove redundant completions for 'core show applications.' * main/pbx_hangup_handler: Remove unused completions for 'core show hanguphandlers all.' * res_sorcery_memory_cache: Add completion for 'reload' argument of 'sorcery memory cache stale' and properly implement. Change-Id: Iee58c7392f6fec34ad9d596109117af87697bbca	9 years ago
Sean Bright	0910773077	manager: Restore Originate failure behavior from Asterisk 11 ... In Asterisk 11, if the 'Originate' AMI command failed to connect the provided Channel while in extension mode, a 'failed' extension would be looked up and run. This was, I believe, unintentionally removed in 51b6c49. This patch restores that behavior. This also adds an enum for the various 'synchronous' modes in an attempt to make them meaningful. ASTERISK-26115 #close Reported by: Nasir Iqbal Change-Id: I8afbd06725e99610e02adb529137d4800c05345d	9 years ago
George Joseph	6f645a6d4e	Merge "media: Add experimental support for RTCP feedback."	9 years ago
Lorenzo Miniero	1061539b75	media: Add experimental support for RTCP feedback. ... This change adds experimental support for providing RTCP feedback information to codec modules so they can dynamically change themselves based on conditions. ASTERISK-26584 Change-Id: Ifd6aa77fb4a7ff546c6025900fc2baf332c31857	9 years ago
Richard Mudgett	cfe72c39cf	LISTFILTER: Remove outdated ERROR message. ... Feeding LISTFILTER an empty variable results in an invalid ERROR message. Earlier changes made the message useless because we can no longer tell if the variable is empty or does not exist. It is valid to try to remove a value from an empty list just as it is valid to try to remove a value that is not in a non-empty list. * Removed the outdated ERROR message. * Added more test cases to the LISTFILTER unit test. Change-Id: Ided9040e6359c44a335ef54e02ef5950a1863134	9 years ago
Corey Farrell	a6e5bae3ef	Remove ASTERISK_REGISTER_FILE. ... ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes all traces of it. Previously exported symbols removed: * __ast_register_file * __ast_unregister_file * ast_complete_source_filename This also removes the mtx_prof static variable that was declared when MTX_PROFILE was enabled. This variable was only used in lock.c so it is now initialized in that file only. ASTERISK-26480 #close Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966	9 years ago
Corey Farrell	824a4e84d1	Refactor usage pattern of xmldoc info tag. ... This updates func_channel.c and main/message.c to use a generic xpointer include instead of including info from each channel driver. Now the name attribute of info is CHANNEL or CHANNEL_EXAMPLES to be included in documentation for func_channel. Setting the name attribute of info to MessageToInfo or MessageFromInfo causes it to be included in the MessageSend application and AMI action. Change-Id: I89fd8276a3250824241a618009714267d3a8d1ea	10 years ago
Matt Jordan	ddab42e296	func_channel: Reorganize documentation ... * Following the example of the PJSIP channel driver, the channel technology specific documentation has been moved to the respective channel drivers that provide that functionality. This has the benefit of locating the documentation of items with those modules that provide it. * Examples of using the CHANNEL function for both standard items as well as for PJSIP have been added. * The 'max_forwards' standard item has been documented. Change-Id: Ifaa79a232c8ac99cf8da6ef6cc7815d398b1b79b	10 years ago
David M. Lee	feb1a43412	Portably sscanf tv_usec ... In a timeval, tv_usec is defined as a suseconds_t, which could be different underlying types on different platforms. Instead of trying to scanf directly into the timeval, scanf into a long int, then copy that into the timeval. Change-Id: I29f22d049d3f7746b6c0cc23fbf4293bdaa5eb95	10 years ago
Corey Farrell	cf1188a1be	Unit tests: Use AST_TEST_DEFINE in conditional code only. ... If AST_TEST_DEFINE is not conditional to TEST_FRAMEWORK it produces dead code. This places all existing unit tests into a conditional block if they weren't already. ASTERISK-26211 #close Change-Id: I8ef83ee11cbc991b07b7a37ecb41433e8c734686	10 years ago
Joshua Colp	4ad333bb0e	func_odbc: Fix connection deadlock. ... The func_odbc module was modified to ensure that the previous behavior of using a single database connection was maintained. This was done by getting a single database connection and holding on to it. With the new multiple connection support in res_odbc this will actually starve every other thread from getting access to the database as it also maintains the previous behavior of having only a single database connection. This change disables the func_odbc specific behavior if the res_odbc module is running with only a single database connection active. The connection is only kept for the duration of the request. ASTERISK-26177 #close Change-Id: I9bdbd8a300fb3233877735ad3fd07bce38115b7f	10 years ago
George Joseph	651290a809	BuildSystem: Fix a few issues hightlighted by gcc 6.x ... gcc 6.1.1 caught a few more issues. Made sure the unit tests still pass for the func_env and stdtime issues. ASTERISK-26157 #close Change-Id: I6664d8f34a45bc1481d2a854481c7878b0c1cf8e	10 years ago
Alexei Gradinari	c378b00a83	func_odbc: single database connection should be optional ... func_odbc was changed in Asterisk 13.9.0 to make func_odbc use a single database connection per DSN because of reported bug ASTERISK-25938 with MySQL/MariaDB LAST_INSERT_ID(). This is drawback in performance when func_odbc is used very often in dialplan. Single database connection should be optional. ASTERISK-26010 Change-Id: I7091783a7150252de8eeb455115bd00514dfe843	10 years ago
Mark Michelson	2b150f0b80	func_odbc: Check connection status before executing queries. ... A recent change to func_odbc made it so that a single connection was maintained per DSN. The problem was that the code was optimistic about the health of the connection after initially opening it and did nothing to re-connect in case the connection had died. This change adds a check before executing a query to ensure that the connection to the database is still up and running. ASTERISK-25963 #close Reported by Ross Beer Change-Id: Id33c86eb04ff48ca088bb2e3086c27b3b683491d	10 years ago
Mark Michelson	924738e950	func_odbc: Use one connection per DSN. ... res_odbc was changed in Asterisk 13.8.0 to remove connection management, opting instead to let unixodbc maintain open connections and return those to Asterisk as requested. This was a boon for realtime, since it meant that multiple threads could potentially run parallel queries since they could each be using their own database connections. However, on the user-facing side, func_odbc, there were some inherent behaviors being relied on that no longer hold true after the change. One such reported behavior was that MySQL's LAST_INSERTED_ID() works per-connection. This means that if Asterisk uses separate connections for every database operation, whereas before it used one connection for everything, we have broken expectations and functionality. The fix provided in this patch is to make func_odbc use a single database connection per DSN. This way, user-facing database usage will have the same behavior as it did pre-13.8.0. However, realtime, which is the real workhorse of database interaction, will continue to let unixodbc manage connections. ASTERISK-25938 #close Reported by Edwin Vandamme Change-Id: Iac961fe79154c6211569afcdfec843c0c24c46dc	10 years ago
Matthew Jordan	6bbcfb34bd	funcs/func_curl: Add the ability for CURL to download and store files ... This patch adds a write option to the CURL dialplan function, allowing it to CURL files and store them locally. The value 'written' to the CURL URL specifies the location on disk to store the file. As an example: same => n,Set(CURL(http://1.1.1.1/foo.wav)=/tmp/foo.wav) Would retrieve the file foo.wav from the remote server and store it in the /tmp directory. Due to the potentially dangerous nature of this function call, APIs are forbidden from using the write functionality unless live_dangerously is set to True in asterisk.conf. ASTERISK-25652 #close Change-Id: I44f4ad823d7d20f04ceaad3698c5c7f653c41b0d	10 years ago
Gianluca Merlo	8f94f947f5	func_aes: fix misuse of strlen on binary data ... The encryption code for AES_ENCRYPT evaluates the length of the data to be encoded in base64 using strlen. The data is binary, thus the length of it can be underestimated at the first NULL character. Reuse the write pointer offset to evaluate it, instead. ASTERISK-25857 #close Change-Id: If686b5d570473eb926693c73461177b35b13b186	10 years ago
Richard Mudgett	0bdbf0d882	func_callerid.c: Update REDIRECTING reason documentation. ... Change-Id: I6e8d39b0711110a4bceafa652e58b30465e28386	10 years ago
Sean Bright	e5fd972d24	func_iconv: Ensure output strings are properly terminated. ... ASTERISK-25272 #close Reported by: Etienne Lessard patches: AST-25272.patch submitted by Etienne Lessard (license #6394) Change-Id: Id75ad202300960a1e91afe15e319d992936ecc17	10 years ago
Mark Michelson	9714da7aa4	res_odbc: Remove connection management ... Asterisk by default will create a single database connection and share it among all threads that attempt to access the database. In previous versions of Asterisk, this was tolerable, because the most used channel driver, chan_sip, mostly accessed the database from a single thread. With PJSIP, however, many threads may be attempting to perform database operations, and there is the potential for many more database accesses, meaning the concurrency is a horrible bottleneck if only one connection is shared. Asterisk has a connection pooling facility built into it, but the implementation has flaws. For one, there is a strict limit on the number of simultaneous connections that could be made to the database. Anything beyond the maximum would result in a failed operation. Attempting to predict what the maximum should be is nearly impossible even for someone intimately familiar with Asterisk's threading model. In addition, use of transactions in the dialplan can cause some severe bugs if connection pooling is enabled. This commit seeks to fix the concurrency problem by removing all connection management code from Asterisk and leaving that to the underlying unixODBC code instead. Now, Asterisk does not share a single connection, nor does it try to maintain a connection pool. Instead, all Asterisk ever does is request a connection from unixODBC and allow unixODBC to either allocate those connections or retrieve them from a pool. Doing this has a bit of a ripple effect. For one, since connections are not long-lived objects, several of the safeguards that previously existed have been removed. We don't have to worry about trying to use a connection that has gone stale. In every case, when we request a connection, it has just been made and we don't need to perform any sanity checks to be sure it's still active. Another major player affected by this change is transactions. Transactions and their respective connections were so tightly coupled that it was almost pornographic. This code change moves transaction-related code to its own file separate from the core ODBC functionality. This way, the core of ODBC does not even have to know that transactions exist. In making this large change, I had to look at a lot of code and understand it. When making this change, I discovered several places where the behavior is definitely not ideal, but it seemed outside the scope of this change to be fixing it. Instead, any place where I saw some sort of room for improvement has had a XXX comment added explaining what could be altered to improve it. Change-Id: I37a84def5ea4ddf93868ce8105f39de078297fbf	10 years ago
Matt Jordan	3b9cba4294	funcs/func_cdr: Correctly report high precision values for duration and billsec ... When CDRs were refactored, func_cdr's ability to report high precision values for duration and billsec (the 'f' option) was broken. This was due to func_cdr incorrectly interpreting the duration/billsec values provided by the CDR engine in milliseconds, as opposed to seconds. Since the CDR engine only provides duration and billsec in seconds, and does not expose either attribute with sufficient precision to merely pass back the underlying value, this patch fixes the bug by re-calculating duration and billsec with microsecond precision based on the start/answer/end times on the CDR. ASTERISK-25179 #close Change-Id: I8bc63822b496537a5bf80baf6102c06206bee841	10 years ago
Rusty Newton	68cad96ffd	func_channel: Add help text for undocumented CHANNEL function arguments ... Adding help text documentation for: * hangupsource * appname * appdata * exten * context * channame * uniqueid * linkedid ASTERISK-24097 #close Reported by: Steven T. Wheeler Tested by: Rusty Newton Change-Id: Ib94b00568b0433987df87d5b67ea529b5905754d	10 years ago
Joshua Colp	0be147f713	Merge "ast_format_cap_get_names: To display all formats, the buffer was increased."	10 years ago
Alexander Traud	cf79b62778	ast_format_cap_get_names: To display all formats, the buffer was increased. ... ASTERISK-25533 #close Change-Id: Ie1a9d1a6511b3f1a56b93d04475fbf8a4e40010a	10 years ago
Walter Doekes	7dd8f89a50	func_callerid: Document that CALLERID(pres) is available. ... CALLERPRES() says that it's deprecated in favor of CALLERID(num-pres) and CALLERID(name-pres). But for channel driver that don't make a distinction between the two (e.g. SIP), it makes more sense to get/set both at once. This change reveals the availability of CALLERID(pres), CONNECTEDLINE(pres), REDIRECTING(orig-pres), REDIRECTING(to-pres) and REDIRECTING(from-pres). ASTERISK-25373 #close Change-Id: I5614ae4ab7d3bbe9c791c1adf147e10de8698d7a	10 years ago
Matt Jordan	7be6194d6f	funcs/func_holdintercept: Actually add the HOLD_INTERCEPT function ... When ab803ec342 was committed, it accidentally forgot to actually *add* the HOLD_INTERCEPT function. This highlights two interesting points: * Gerrit forces you to put the patch as it is going to into the repo up for review, which Review Board did not. Yay Gerrit. * No one apparently bothered to use this feature, or else they don't know about it. I'm going to go with the latter explanation. ASTERISK-24922 Change-Id: Ida38278f259dd07c334a36f9b7d5475b5db72396	10 years ago