1946 Commits (8d22e7e6cfebc730b1df73471b58facdfbcc89e7)

Author	SHA1	Message	Date
Joshua Colp	5c2120f5f5	bridge_softmix / app_confbridge: Add support for REMB combining. ... This change adds the ability for multiple REMB reports in bridge_softmix to be combined according to a configured behavior into a single report. This single report is sent back to the sender of video, which adjusts the encoding bitrate to be at or below the bitrate of the report. The available behaviors are: lowest, highest, and average. Lowest uses the lowest received bitrate. Highest uses the highest received bitrate. Average goes through the received bitrates adding them to the previous average and creates a new average. Other behaviors can be added in the future and the existing average one may be adjusted, but this provides the foundation to do so. Support for configuring which behavior to use has been added to app_confbridge. ASTERISK-27804 Change-Id: I9eafe4e7c1f72d67074a8d6acb26bfcf19322b66	8 years ago
Joshua Colp	132fd2abdb	app_confbridge / bridge_softmix: Add ability to configure REMB interval. ... This change adds a configuration option to app_confbridge which can be used to set the interval at which we will send a combined REMB (remote estimated maximum bitrate) frame to sources of video. The bridging API has also been extended slightly to allow setting this so bridge_softmix can use it. ASTERISK-27786 Change-Id: I0e49eae60f369c86434414f3cb8278709c793c82	8 years ago
George Joseph	5de4dae6dd	channel.c: Allow generic plc then channel formats are equal ... If the two formats on a channel are equal, we don't transcode and since the generic plc needs slin to work, it doesn't get invoked. * A new configuration option "genericplc_on_equal_codecs" was added to the "plc" section of codecs.conf to allow generic packet loss concealment even if no transcoding was originally needed. Transcoding via SLIN is forced in this case. ASTERISK-27743 Change-Id: I0577026a179dea34232e63123254b4e0508378f4	8 years ago
Jenkins2	1335ee7a28	Merge "core: Fix handling of maximum length lines in config files." into 15	8 years ago
Richard Mudgett	f6d5bf99f2	pjproject: Add cache_pools debugging option. ... The pool cache gets in the way of finding use after free errors of memory pool contents. Tools like valgrind and MALLOC_DEBUG don't know when a pool is released because it gets put into the cache instead of being freed. * Added the "cache_pools" option to pjproject.conf. Disabling the option helps track down pool content mismanagement when using valgrind or MALLOC_DEBUG. The cache gets in the way of determining if the pool contents are used after free and who freed it. To disable the pool caching simply disable the cache_pools option in pjproject.conf and restart Asterisk. Sample pjproject.conf setting: [startup] cache_pools=no * Made current users of the caching pool factory initialization and destruction calls call common routines to create and destroy cached pools. ASTERISK-27704 Change-Id: I64d5befbaeed2532f93aa027a51eb52347d2b828	8 years ago
Corey Farrell	213cd59412	core: Fix handling of maximum length lines in config files. ... When a line is the maximum length "\n" is found at sizeof(buf) - 2 since the last character is actually the null terminator. In addition if a line was exactly 8190 plus a multiple of 8192 characters long the config parser would skip the following line. Additionally fix comment in voicemail.conf sample config. It previously stated that emailbody can only contain up to 512 characters which is always wrong. The buffer is normally 8192 characters unless LOW_MEMORY is enabled then it is 512 characters. The updated comment states that the line can be up to 8190 or 510 characters since the line feed and NULL terminator each use a character. ASTERISK-26688 #close Change-Id: I80864a0d40d2e2d8cd79d72af52a8f0a3a99c015	8 years ago
Richard Mudgett	447fc8cc0a	app_confbridge: Update dsp_silence_threshold and dsp_talking_threshold docs. ... The dsp_talking_threshold does not represent time in milliseconds. It represents the average magnitude per sample in the audio packets. This is what the DSP uses to determine if a packet is silence or talking/noise. Change-Id: If6f939c100eb92a5ac6c21236559018eeaf58443	8 years ago
ghjm	d4e9985b27	app_followme: Add a prompt to be read when a call is connected ... This patch adds the ability to configure a prompt which will be read to the "winner" who pressed 1 (or the configured value) and received the call. ASTERISK-24372 #close Change-Id: I6ec1c6c883347f7d1e1f597189544993c8d65272	8 years ago
Richard Mudgett	821b718a96	res_pjsip: Split type=identify to IP address and SIP header matching priorities ... The type=identify endpoint identification method can match by IP address and by SIP header. However, the SIP header matching has limited usefulness because you cannot specify the SIP header matching priority relative to the IP address matching. All the matching happens at the same priority and the order of evaluating the identify sections is indeterminate. e.g., If you had two type=identify sections where one matches by IP address for endpoint alice and the other matches by SIP header for endpoint bob then you couldn't predict which endpoint is matched when a request comes in that matches both. * Extract the SIP header matching criteria into its own "header" endpoint identification method so the user can specify the relative priority of the SIP header and the IP address matching criteria in the global endpoint_identifier_order option. The "ip" endpoint identification method now only matches by IP address. ASTERISK-27491 Change-Id: I9df142a575b7e1e3471b7cda5d3ea156cef08095	8 years ago
Richard Mudgett	6d9482267b	res_pjsip.c: Update the endpoint identification documentation. ... * Endpoint identify_by documentation. * IP/Header endpoint identifier documentation. Change-Id: Id92f00b495acca7be945daf749d2abd7f76a0b5a	8 years ago
Sean Bright	b64c02e414	Remove as much trailing whitespace as possible. ... Change-Id: I873c1c6d00f447269bd841494459efccdd2c19c0	8 years ago
Joshua Colp	20a1a5632d	confbridge: Clarify mute sound documentation. ... The mute/unmute sounds are only played when the action is initiated using the DTMF menu. ASTERISK-24756 Change-Id: I55b3dd5bc166096bf5e2f547ddd0ce355f36e3dc	8 years ago
Jenkins2	f06f311497	Merge "res_rtp_asterisk.c: Disable packet flood detection for video streams." into 15	8 years ago
Richard Mudgett	39c8d566ad	res_rtp_asterisk.c: Disable packet flood detection for video streams. ... We should not do flood detection on video RTP streams. Video RTP streams are very bursty by nature. They send out a burst of packets to update the video frame then wait for the next video frame update. Really only audio streams can be checked for flooding. The others are either bursty or don't have a set rate. * Added code to selectively disable packet flood detection for video RTP streams. ASTERISK-27440 Change-Id: I78031491a6e75c2d4b1e9c2462dc498fe9880a70	8 years ago
Sean Bright	a150e88e72	configs: Comment out and change IP of iax.conf [demo] ... This no longer appears to exist, so no sense in causing confusion. ASTERISK-27175 #close Reported by: Tzafrir Cohen Change-Id: Idde967924c69f6a741dc9a5ab7dacb44d22cf100	8 years ago
Alexander Traud	19de8a71b5	res_rtp_asterisk: Correct default in sample configuration file. ... With Asterisk 12 (commit 866d968), the default of "icesupport" changed to - "yes" in the module "res_rtp_asterisk" and - "no" in the module "chan_sip". The latter was reflected in the sample configuration file for "sip.conf". The former did not make it into "rtp.conf.sample". ASTERISK-20643 Change-Id: I2a2e0a900455d0767a99ea576e30adc6d7608a36	8 years ago
Richard Mudgett	c12437273e	features.conf.sample: Clarify ActivatedBy documentation wording. ... Change-Id: Id2899331fe05d1909a862ea879742879d086bc64	8 years ago
George Joseph	c1a82bcb8c	ast_coredumper: Add ability to use directory other than /tmp ... The OUTPUTDIR environment variable can now be set either in the environment itself or in ast_debug_tools.conf. If set, it's used for all work products instead of /tmp. Also added the --tarball-config option that includes the contents of /etc/asterisk when either --tarball-coredumps or --tarball-results are used. Change-Id: I66b2553319df61caea5b313d084f51978f730b4c	8 years ago
Richard Mudgett	cb63ade611	core: Add cache_media_frames debugging option. ... The media frame cache gets in the way of finding use after free errors of media frames. Tools like valgrind and MALLOC_DEBUG don't know when a frame is released because it gets put into the cache instead of being freed. * Added the "cache_media_frames" option to asterisk.conf. Disabling the option helps track down media frame mismanagement when using valgrind or MALLOC_DEBUG. The cache gets in the way of determining if the frame is used after free and who freed it. NOTE: This option has no effect when Asterisk is compiled with the LOW_MEMORY compile time option enabled because the cache code does not exist. To disable the media frame cache simply disable the cache_media_frames option in asterisk.conf and restart Asterisk. Sample asterisk.conf setting: [options] cache_media_frames=no ASTERISK-27413 Change-Id: I0ab2ce0f4547cccf2eb214901835c2d951b78c00	8 years ago
Sean Bright	ddb8fd6124	dtls: Add support for ephemeral DTLS certificates. ... This mimics the behavior of Chrome and Firefox and creates an ephemeral X.509 certificate for each DTLS session. Currently, the only supported key type is ECDSA because of its faster generation time, but other key types can be added in the future as necessary. ASTERISK-27395 Change-Id: I5122e5f4b83c6320cc17407a187fcf491daf30b4	8 years ago
Joshua Colp	e77bee9fb5	res_pjsip: Add 'ip' as a valid option to 'identify_by' on endpoint. ... When the identify_by option on an endpoint is set to ip it will only be identified using the res_pjsip_endpoint_identifier_ip module. This ensures that it is not mistakenly matched using the username of the From header. To ensure behavior has not changed the default has been changed to "username,ip" for the identify_by option. ASTERISK-27206 Change-Id: I2170b86a7f7e221b4f00bf14aa1ef1ac5b050bbd	8 years ago
Jenkins2	defa7084c7	Merge "res_pjsip_registrar.c: Update remove_existing AOR contact handling." into 15	8 years ago
Richard Mudgett	6014a8743d	res_pjsip_registrar.c: Update remove_existing AOR contact handling. ... When "rewrite_contact" is enabled, the "max_contacts" count option can block re-registrations because the source port from the endpoint can be random. When the re-registration is blocked, the endpoint may give up re-registering and require manual intervention. * The "remove_existing" option now allows a registration to succeed by displacing any existing contacts that now exceed the "max_contacts" count. Any removed contacts are the next to expire. The behaviour change is beneficial when "rewrite_contact" is enabled and "max_contacts" is greater than one. The removed contact is likely the old contact created by "rewrite_contact" that the device is refreshing. ASTERISK-27192 Change-Id: I64c107a10b70db1697d17136051ae6bf22b5314b	8 years ago
Sean Bright	737624316d	res_config_sqlite: Don't enable SQLite CDRs when running 'make samples' ... Change-Id: I65a5190b2732b2246d67472db70dd37db64ddad4	8 years ago
George Joseph	40722149d7	res_pjsip: Filter out non SIP(S) requests ... Incoming requests with non sip(s) URIs in the Request, To, From or Contact URIs are now rejected with PJSIP_SC_UNSUPPORTED_URI_SCHEME (416). This is performed in pjsip_message_filter (formerly pjsip_message_ip_updater) and is done at pjproject's "TRANSPORT" layer before a request can even reach the distributor. URIs read by res_pjsip_outbound_publish from pjsip.conf are now also checked for both length and sip(s) scheme. Those URIs read by outbound registration and aor were already being checked for scheme but their error messages needed to be updated to include scheme failure as well as length failure. Change-Id: Ibb2f9f1d2dc7549da562af4cbd9156c44ffdd460	9 years ago
George Joseph	752f0533dd	res_pjsip: Add handling for incoming unsolicited MWI NOTIFY ... A new endpoint parameter "incoming_mwi_mailbox" allows Asterisk to receive unsolicited MWI NOTIFY requests and make them available to other modules via the stasis message bus. res_pjsip_pubsub has a new handler "pubsub_on_rx_mwi_notify_request" that parses a simple-message-summary body and, if endpoint->incoming_mwi_account is set, calls ast_publish_mwi_state with the voice-message counts from the message. Change-Id: I08bae3d16e77af48fcccc2c936acce8fc0ef0f3c	9 years ago
Corey Farrell	0372157a48	AST-2017-006: Fix app_minivm application MinivmNotify command injection ... An admin can configure app_minivm with an externnotify program to be run when a voicemail is received. The app_minivm application MinivmNotify uses ast_safe_system() for this purpose which is vulnerable to command injection since the Caller-ID name and number values given to externnotify can come from an external untrusted source. * Add ast_safe_execvp() function. This gives modules the ability to run external commands with greater safety compared to ast_safe_system(). Specifically when some parameters are filled by untrusted sources the new function does not allow malicious input to break argument encoding. This may be of particular concern where CALLERID(name) or CALLERID(num) may be used as a parameter to a script run by ast_safe_system() which could potentially allow arbitrary command execution. * Changed app_minivm.c:run_externnotify() to use the new ast_safe_execvp() instead of ast_safe_system() to avoid command injection. * Document code injection potential from untrusted data sources for other shell commands that are under user control. ASTERISK-27103 Change-Id: I7552472247a84cde24e1358aaf64af160107aef1	9 years ago
Richard Mudgett	51bcfab4c6	app_confbridge: Document sfu video_mode value. ... Change-Id: I26e17df2c93f3933b23f78070603adbcc84ba204	9 years ago
Andrey Egorov	4e11c2192f	res_xmpp: Google OAuth 2.0 protocol support for XMPP / Motif ... Add ability to use tokens instead of passwords according to Google OAuth 2.0 protocol. ASTERISK-27169 Reported by: Andrey Egorov Tested by: Andrey Egorov Change-Id: I07f7052a502457ab55010a4d3686653b60f4c8db	9 years ago
Sean Bright	1078d4f7f6	app_queue: Add announce-position-only-up option ... Setting this option will cause the Queue application to only announce the caller's position if it has improved since the last time that we announced it. Change-Id: I173a124121422209485b043e2bf784f54242fce6	9 years ago
Joshua Colp	451d86d62e	bridge_softmix / res_rtp_asterisk: Fix packet loss and renegotiation issues. ... This change does a few things to improve packet loss and renegotiation: 1. On outgoing RTP streams we will now properly reflect out of order packets and packet loss in the sequence number. This allows the remote jitterbuffer to better reorder things. 2. Video updates can now be discarded for a period of time after one has been sent to prevent flooding of clients. 3. For declined and removed streams we will now release any media session resources associated with them. This was not previously done and caused an issue where old state was being used for a new stream. 4. RTP bundling was not actually removing bundled RTP instances from the parent. This has been resolved by removing based on the RTP instance itself and not the SSRC. 5. The code did not properly handle explicitly unbundling an RTP instance from its parent. This now works as expected. ASTERISK-27143 Change-Id: Ibd91362f0e4990b6129638e712bc8adf0899fd45	9 years ago
Jenkins2	62c381afdb	Merge "core: Add PARSE_TIMELEN support to ast_parse_arg and ACO."	9 years ago
Kevin Harwell	7da6ddda30	res_pjsip: Add "webrtc" configuration option ... This patch creates a new configuration option called "webrtc". When enabled it defaults and enables the following options that are needed in order for webrtc to work in Asterisk: rtcp-mux, use_avpf, ice_support, and use_received_transport=enabled media_encryption=dtls dtls_verify=fingerprint dtls_setup=actpass When "webrtc" is enabled, this patch also parses the "msid" media level attribute from an SDP. It will also appropriately add it onto the outgoing session when applicable. Lastly, when "webrtc" is enabled h264 RTCP FIR feedback frames are now sent. ASTERISK-27119 #close Change-Id: I5ec02e07c5d5b9ad86a34fdf31bf2f9da9aac6fd	9 years ago
Corey Farrell	78a50b0343	core: Add PARSE_TIMELEN support to ast_parse_arg and ACO. ... This adds support for parsing timelen values from config files. This includes support for all flags which apply to PARSE_INT32. Support for this parser is added to ACO via the OPT_TIMELEN_T option type. Fixes an issue where extra characters provided to ast_app_parse_timelen were ignored, they now cause an error. Testing is included. ASTERISK-27117 #close Change-Id: I6b333feca7e3f83b4ef5bf2636fc0fd613742554	9 years ago
Sean Bright	e83b9d141a	basic-pbx: Remove res_pjsip_multihomed from sample config ... ASTERISK-27127 #close Reported by: HZMI8gkCvPpom0tM Change-Id: I2b0c54570d58156e37166ac536728af3b6c01789	9 years ago
George Joseph	b7a875778a	res_musiconhold: Add kill_escalation_delay, kill_method to class ... By default, when res_musiconhold reloads or unloads, it sends a HUP signal to custom applications (and all descendants), waits 100ms, then sends a TERM signal, waits 100ms, then finally sends a KILL signal. An application which is interacting with an external device and/or spawns children of its own may not be able to exit cleanly in the default times, expecially if sent a KILL signal, or if it's children are getting signals directly from res_musiconhoild. * To allow extra time, the 'kill_escalation_delay' class option can be used to set the number of milliseconds res_musiconhold waits before escalating kill signals, with the default being the current 100ms. * To control to whom the signals are sent, the "kill_method" class option can be set to "process_group" (the default, existing behavior), which sends signals to the application and its descendants directly, or "process" which sends signals only to the application itself. Change-Id: Iff70a1a9405685a9021a68416830c0db5158603b	9 years ago
George Joseph	c0c99c7618	chan_pjsip: Fix ability to send UPDATE on COLP ... When connected_line_method is "invite", we're supposed to determine if the client can support UPDATE and if it can, send UPDATE instead of INVITE to avoid the SDP renegotiation. Not only was pjproject not setting the PJSIP_INV_SUPPORT_UPDATE flag, we were testing that invite_tsx wasn't NULL which isn't always the case. * Updated chan_pjsip/update_connected_line_information to drop the requirement that invite_tsx isn't NULL. * Submitted patch to pjproject sip_inv.c that sets the PJSIP_INV_SUPPORT_UPDATE flag correctly. * Updated pjsip.conf.sample to clarify what happens when "invite" is specified. ASTERISK-27095 Change-Id: Ic2381b3567b8052c616d96fbe79564c530e81560	9 years ago
Jenkins2	366971827a	Merge "app_voicemail: IMAP connection control"	9 years ago
Mark Michelson	45df25a579	chan_pjsip: Add support for multiple streams of the same type. ... The stream topology (list of streams and order) is now stored with the configured PJSIP endpoints and used during the negotiation process. Media negotiation state information has been changed to be stored in a separate object. Two of these objects exist at any one time on a session. The active media state information is what was previously negotiated and the pending media state information is what the media state will become if negotiation succeeds. Streams and other state information is stored in this object using the index (or position) of each individual stream for easy lookup. The ability for a media type handler to specify a callback for writing has been added as well as the ability to add file descriptors with a callback which is invoked when data is available to be read on them. This allows media logic to live outside of the chan_pjsip module. Direct media has been changed so that only the first audio and video stream are directly connected. In the future once the RTP engine glue API has been updated to know about streams each individual stream can be directly connected as appropriate. Media negotiation itself will currently answer all the provided streams on an offer within configured limits and on an offer will use the topology created as a result of the disallow/allow codec lines. If a stream has been removed or declined we will now mark it as such within the resulting SDP. Applications can now also request that the stream topology change. If we are told to do so we will limit any provided formats to the ones configured on the endpoint and send a re-invite with the new topology. Two new configuration options have also been added to PJSIP endpoints: max_audio_streams: determines the maximum number of audio streams to offer/accept from an endpoint. Defaults to 1. max_video_streams: determines the maximum number of video streams to offer/accept from an endpoint. Defaults to 1. ASTERISK-27076 Change-Id: I8afd8dd2eb538806a39b887af0abd046266e14c7	9 years ago
Alexei Gradinari	0cef7b9d4e	app_voicemail: IMAP connection control ... A new global option "imap_poll_logout" was added to specify whether need to disconnect from the IMAP server after polling of mailboxes. ASTERISK-27068 #close Closing IMAP connection after loading mailbox from voicemail.conf ASTERISK-24052 #close Change-Id: Ib7558ba04516240a32b65f42e9be64372a0ae12a	9 years ago
Jenkins2	0c0d69d4f3	Merge "cdr: fix mistake spelling of a word for Unanswered."	9 years ago
Rodrigo Ramírez Norambuena	a7488f8a70	cdr: fix mistake spelling of a word for Unanswered. ... Change-Id: I7a610bef369924523a445c7e849ee88cc45dc5df	9 years ago
Alexei Gradinari	7a46309d3d	res_pjsip: New endpoint option "notify_early_inuse_ringing" ... This option was added to control whether to notify dialog-info state 'early' or 'confirmed' on Ringing when already INUSE. The value "yes" is useful for some SIP phones (Cisco SPA) to be able to indicate and pick up ringing devices. ASTERISK-26919 #close Change-Id: Ie050bc30023543c7dfb4365c5be3ce58c738c711	9 years ago
Sean Bright	847087a4ff	codecs.conf.sample: Fix max_bandwidth speling error ... Reported by Sylvain Boily via asterisk-dev mailing list. Change-Id: Idc7623f335aea3e144dd369ba383b9a757480a9d	9 years ago
Jenkins2	48d047ad5a	Merge "res_pjsip: New endpoint option "refer_blind_progress""	9 years ago
Jenkins2	77f7c1b98f	Merge "Sqlite3: make busy_timeout configurable."	9 years ago
Martin Tomec	44c5a144ce	Sqlite3: make busy_timeout configurable. ... Enables runtime configuration of busy_timeout for sqlite databases. Default timeout remains 1000ms. ASTERISK-27014 #close Change-Id: I8921a3aac3c335843be4cb17d2dd0a5c157a36da	9 years ago
Joshua Colp	2e7866ebb7	Merge "app_queue: Add QUEUE_RAISE_PENALTY feature"	9 years ago
Steve Davies	be4beff3e4	app_queue: Add QUEUE_RAISE_PENALTY feature ... Additional variable to work alongside QUEUE_MAX_PENALTY and QUEUE_MIN_PENALTY, including an extra parameter in queuerules.conf. This value causes lower Agent penalty values to "raise up" so that they can join higher penalty agents and be treated equally after a period of time. ASTERISK-26995 #close Change-Id: If1c6421a983667a5ac4c359f6dac25b212b4c459	9 years ago
Joshua Colp	aa4c800060	Merge "Fix spelling queues.conf.sample file"	9 years ago