721 Commits (8cb6dfd41debb2259ec3a33ccfa78f1d902e4c22)

Author	SHA1	Message	Date
Sebastian Jennen	fdaf266cd3	tests: add tests/test_codec_translations.c ... This tests checks [slin -> codec -> slin] and then compares slin in vs out regarding signal noise ratio and delay. Near-lossless codecs (ulaw, alaw) are checked with a maximum per-sample error bound. Lossy codecs are checked with a per-codec SNR threshold. Cross-correlation alignment compensates for algorithmic delay in codecs like speex and opus. Covered codecs: ulaw, alaw, adpcm, g726, g726aal2, gsm, speex, speex16, speex32, ilbc, codec2, lpc10, g722, opus. Resolves: #1812	5 months ago
Joshua C. Colp	e819303210	pjsip: Move from threadpool to taskpool ... This change moves the PJSIP module from the threadpool API to the taskpool API. PJSIP-specific implementations for task usage have been removed and replaced with calls to the optimized taskpool implementations instead. The need for a pool of serializers has also been removed as taskpool inherently provides this. The default settings have also been changed to be more realistic for common usage. UpgradeNote: The threadpool_* options in pjsip.conf have now been deprecated though they continue to be read and used. They have been replaced with taskpool options that give greater control over the underlying taskpool used for PJSIP. An alembic upgrade script has been added to add these options to realtime as well.	10 months ago
Mike Bradeen	ee3b139739	taskprocessors: Improve logging and add new cli options ... This change makes some small changes to improve log readability in addition to the following changes: Modified 'core show taskprocessors' to now show Low time and High time for task execution. New command 'core show taskprocessor name <taskprocessor-name>' to dump taskprocessor info and current queue. Addionally, a new test was added to demonstrate the 'show taskprocessor name' functionality: test execute category /main/taskprocessor/ name taskprocessor_cli_show Setting 'core set debug 3 taskprocessor.c' will now log pushed tasks. (Warning this is will cause extremely high levels of logging at even low traffic levels.) Resolves: #1566 UserNote: New CLI command has been added - core show taskprocessor name <taskprocessor-name>	10 months ago
Joshua C. Colp	5dfb2f7200	endpoints: Remove need for stasis subscription. ... When an endpoint is created in the core of Asterisk a subscription was previously created alongside it to monitor any channels being destroyed that were related to it. This was done by receiving all channel snapshot updates for every channel and only reacting when it was indicated that the channel was dead. This change removes this logic and instead provides an API call for directly removing a channel from an endpoint. This is called when channels are destroyed. This operation is fast, so blocking the calling thread for a short period of time doesn't have any noticeable impact.	1 year ago
George Joseph	411f66bd18	taskpool: Fix some references to threadpool that should be taskpool. ... Resolves: #1478	1 year ago
Joshua C. Colp	061cc9562a	taskpool: Add taskpool API, switch Stasis to using it. ... This change introduces a new API called taskpool. This is a pool of taskprocessors. It provides the following functionality: 1. Task pushing to a pool of taskprocessors 2. Synchronous tasks 3. Serializers for execution ordering of tasks 4. Growing/shrinking of number of taskprocessors in pool This functionality already exists through the combination of threadpool+taskprocessors but through investigating I determined that this carries substantial overhead for short to medium duration tasks. The threadpool uses a single queue of work, and for management of threads it involves additional tasks. I wrote taskpool to eliminate the extra overhead and management as much as possible. Instead of a single queue of work each taskprocessor has its own queue and at push time a selector chooses the taskprocessor to queue the task to. Each taskprocessor also has its own thread like normal. This spreads out the tasks immediately and reduces contention on shared resources. Using the included efficiency tests the number of tasks that can be executed per second in a taskpool is 6-12 times more than an equivalent threadpool+taskprocessor setup. Stasis has been moved over to using this new API as it is a heavy consumer of threadpool+taskprocessors and produces a lot of tasks. UpgradeNote: The threadpool_* options in stasis.conf have now been deprecated though they continue to be read and used. They have been replaced with taskpool options that give greater control over the underlying taskpool used for stasis. DeveloperNote: The taskpool API has been added for common usage of a pool of taskprocessors. It is suggested to use this API instead of the threadpool+taskprocessor approach.	1 year ago
Alexei Gradinari	dfeb54a00f	sorcery: Prevent duplicate objects and ensure missing objects are created on update ... This patch resolves two issues in Sorcery objectset handling with multiple backends: 1. Prevent duplicate objects: When an object exists in more than one backend (e.g., a contact in both 'astdb' and 'realtime'), the objectset previously returned multiple instances of the same logical object. This caused logic failures in components like the PJSIP registrar, where duplicate contact entries led to overcounting and incorrect deletions, when max_contacts=1 and remove_existing=yes. This patch ensures only one instance of an object with a given key is added to the objectset, avoiding these duplicate-related side effects. 2. Ensure missing objects are created: When using multiple writable backends, a temporary backend failure can lead to objects missing permanently from that backend. Currently, .update() silently fails if the object is not present, and no .create() is attempted. This results in inconsistent state across backends (e.g. astdb vs. realtime). This patch introduces a new global option in sorcery.conf: [general] update_or_create_on_update_miss = yes|no Default: no (preserves existing behavior). When enabled: if .update() fails with no data found, .create() is attempted in that backend. This ensures that objects missing due to temporary backend outages are re-synchronized once the backend is available again. Added a new CLI command: sorcery show settings Displays global Sorcery settings, including the current value of update_or_create_on_update_miss. Updated tests to validate both flag enabled/disabled behavior. Fixes: #1289 UserNote: Users relying on Sorcery multiple writable backends configurations (e.g., astdb + realtime) may now enable update_or_create_on_update_miss = yes in sorcery.conf to ensure missing objects are recreated after temporary backend failures. Default behavior remains unchanged unless explicitly enabled. (cherry picked from commit a6142af2a0)	1 year ago
Naveen Albert	746c90db63	test_res_prometheus: Fix compilation failure on Debian 13. ... curl_easy_setopt expects long types, so be explicit. Resolves: #1369 (cherry picked from commit d04f273955)	1 year ago
George Joseph	8d69af73d6	ARI: REST over Websocket ... This commit adds the ability to make ARI REST requests over the same websocket used to receive events. For full details on how to use the new capability, visit... https://docs.asterisk.org/Configuration/Interfaces/Asterisk-REST-Interface-ARI/ARI-REST-over-WebSocket/ Changes: * Added utilities to http.c: * ast_get_http_method_from_string(). * ast_http_parse_post_form(). * Added utilities to json.c: * ast_json_nvp_array_to_ast_variables(). * ast_variables_to_json_nvp_array(). * Added definitions for new events to carry REST responses. * Created res/ari/ari_websocket_requests.c to house the new request handlers. * Moved non-event specific code out of res/ari/resource_events.c into res/ari/ari_websockets.c * Refactored res/res_ari.c to move non-http code out of ast_ari_callback() (which is http specific) and into ast_ari_invoke() so it can be shared between both the http and websocket transports. UpgradeNote: This commit adds the ability to make ARI REST requests over the same websocket used to receive events. See https://docs.asterisk.org/Configuration/Interfaces/Asterisk-REST-Interface-ARI/ARI-REST-over-WebSocket/ (cherry picked from commit 4e07d3d50f)	2 years ago
Sean Bright	72fa12a8ca	strings.c: Improve numeric detection in `ast_strings_match()`. ... Essentially, we were treating 1234x1234 and 1234x5678 as 'equal' because we were able to convert the prefix of each of these strings to the same number. Resolves: #1028 (cherry picked from commit e8cbf576bb)	2 years ago
George Joseph	4775c405ce	gcc14: Fix issues caught by gcc 14 ... * reqresp_parser.c: Fix misuse of "static" with linked list definitions * test_message.c: Fix segfaults caused by passing NULL as an sprintf fmt (cherry picked from commit 0dadbff18a)	2 years ago
George Joseph	1324eb05c5	Add ability to pass arguments to unit tests from the CLI ... Unit tests can now be passed custom arguments from the command line. For example, the following command would run the "mytest" test in the "/main/mycat" category with the option "myoption=54" `CLI> test execute category /main/mycat name mytest options myoption=54` You can also pass options to an entire category... `CLI> test execute category /main/mycat options myoption=54` Basically, everything after the "options" keyword is passed verbatim to the test which must decide what to do with it. * A new API ast_test_get_cli_args() was created to give the tests access to the cli_args->argc and cli_args->argv elements. * Although not needed for the option processing, a new macro ast_test_validate_cleanup_custom() was added to test.h that allows you to specify a custom error message instead of just "Condition failed". * The test_skel.c was updated to demonstrate parsing options and the use of the ast_test_validate_cleanup_custom() macro. (cherry picked from commit b33acc8f86)	2 years ago
Naveen Albert	2e3879a609	main, res, tests: Fix compilation errors on FreeBSD. ... asterisk.c, manager.c: Increase buffer sizes to avoid truncation warnings. config.c: Include header file for WIFEXITED/WEXITSTATUS macros. res_timing_kqueue: Use more portable format specifier. test_crypto: Use non-linux limits.h header file. Resolves: #916 (cherry picked from commit c807f39267)	2 years ago
George Joseph	490db29d60	db.c: Remove limit on family/key length ... Consumers like media_cache have been running into issues with the previous astdb "/family/key" limit of 253 bytes when needing to store things like long URIs. An Amazon S3 URI is a good example of this. Now, instead of using a static 256 byte buffer for "/family/key", we use ast_asprintf() to dynamically create it. Both test_db.c and test_media_cache.c were also updated to use keys/URIs over the old 253 character limit. Resolves: #881 UserNote: The `ast_db_*()` APIs have had the 253 byte limit on "/family/key" removed and will now accept families and keys with a total length of up to SQLITE_MAX_LENGTH (currently 1e9!). This affects the `DB*` dialplan applications, dialplan functions, manager actions and `databse` CLI commands. Since the media_cache also uses the `ast_db_*()` APIs, you can now store resources with URIs longer than 253 bytes. (cherry picked from commit 4f3e2c1012)	2 years ago
Holger Hans Peter Freyther	081240cf9a	res_prometheus: Fix duplicate output of metric and help text ... The prometheus exposition format requires each line to be unique[1]. This is handled by struct prometheus_metric having a list of children that is managed when registering a metric. In case the scrape callback is used, it is the responsibility of the implementation to handle this correctly. Originally the bridge callback didn't handle NULL snapshots, the crash fix lead to NULL metrics, and fixing that lead to duplicates. The original code assumed that snapshots are not NULL and then relied on "if (i > 0)" to establish the parent/children relationship between metrics of the same class. This is not workerable as the first bridge might be invisible/lacks a snapshot. Fix this by keeping a separate array of the first metric by class. Instead of relying on the index of the bridge, check whether the array has an entry. Use that array for the output. Add a test case that verifies that the help text is not duplicated. Resolves: #642 [1] https://prometheus.io/docs/instrumenting/exposition_formats/#grouping-and-sorting (cherry picked from commit d11eba69a6)	3 years ago
Holger Hans Peter Freyther	7699af00e1	stasis: Update the snapshot after setting the redirect ... The previous commit added the caller_rdnis attribute. Make it avialble during a possible ChanngelHangupRequest. (cherry picked from commit 56733c73b4)	3 years ago
Holger Hans Peter Freyther	986c71953c	res_prometheus: Do not generate broken metrics ... In 8d6fdf9c3a invisible bridges were skipped but that lead to producing metrics with no name and no help. Keep track of the number of metrics configured and then only emit these. Add a basic testcase that verifies that there is no '(NULL)' in the output. ASTERISK-30474 (cherry picked from commit a10de8bc72)	3 years ago
George Joseph	8e6f15d185	test_statis_endpoints: Fix channel_messages test again ... (cherry picked from commit 25bc5544d8)	3 years ago
George Joseph	b7775ae4e1	test_stasis_endpoints.c: Make channel_messages more stable ... The channel_messages test was assuming that stasis would return messages in a specific order. This is an incorrect assumption as message ordering was never guaranteed. This was causing the test to fail occasionally. We now test all the messages for the required message types instead of testing one by one. Resolves: #158 (cherry picked from commit 83781c23b9)	3 years ago
George Joseph	ee09bbbb5f	build: Fix a few gcc 13 issues ... * gcc 13 is now catching when a function is declared as returning an enum but defined as returning an int or vice versa. Fixed a few in app.h, loader.c, stasis_message.c. * gcc 13 is also now (incorrectly) complaining of dangling pointers when assigning a pointer to a local char array to a char *. Had to change that to an ast_alloca. Resolves: #155 (cherry picked from commit 6c8b23a688)	3 years ago
George Joseph	d0ce6d4ee5	test.c: Fix counting of tests and add 2 new tests ... The unit test XML output was counting all registered tests as "run" even when only a subset were actually requested to be run and the "failures" attribute was missing. * The "tests" attribute of the "testsuite" element in the output XML now reflects only the tests actually requested to be executed instead of all the tests registered. * The "failures" attribute was added to the "testsuite" element. Also added 2 new unit tests that just pass and fail to be used for CI testing. Change-Id: Ia137814b5aeb0e1a44c75034bd3615c26021da69 (cherry picked from commit a0fd95ef52)	4 years ago
Sean Bright	827222d607	test_crypto.c: Fix getcwd(…) build error. ... `getcwd(…)` is decorated with the `warn_unused_result` attribute and therefore needs its return value checked. Change-Id: Idcccb20a0abf293202c28633d0e9ee0f6a9dbe93	4 years ago
George Joseph	4710f37ef6	res_rtp_asterisk: Asterisk Media Experience Score (MES) ... ----------------- This commit reinstates MES with some casting fixes to the functions in time.h that convert between doubles and timeval structures. The casting issues were causing incorrect timestamps to be calculated which caused transcoding from/to G722 to produce bad or no audio. ASTERISK-30391 ----------------- This module has been updated to provide additional quality statistics in the form of an Asterisk Media Experience Score. The score is avilable using the same mechanisms you'd use to retrieve jitter, loss, and rtt statistics. For more information about the score and how to retrieve it, see https://wiki.asterisk.org/wiki/display/AST/Media+Experience+Score * Updated chan_pjsip to set quality channel variables when a call ends. * Updated channels/pjsip/dialplan_functions.c to add the ability to retrieve the MES along with the existing rtcp stats when using the CHANNEL dialplan function. * Added the ast_debug_rtp_is_allowed and ast_debug_rtcp_is_allowed checks for debugging purposes. * Added several function to time.h for manipulating time-in-samples and times represented as double seconds. * Updated rtp_engine.c to pass through the MES when stats are requested. Also debug output that dumps the stats when an rtp instance is destroyed. * Updated res_rtp_asterisk.c to implement the calculation of the MES. In the process, also had to update the calculation of jitter. Many debugging statements were also changed to be more informative. * Added a unit test for internal testing. The test should not be run during normal operation and is disabled by default. Change-Id: I4fce265965e68c3fdfeca55e614371ee69c65038	4 years ago
George Joseph	62ca063fca	Revert "res_rtp_asterisk: Asterisk Media Experience Score (MES)" ... This reverts commit d454801c2d. Reason for revert: Issue when transcoding to/from g722 Change-Id: I09f49e171b1661548657a9ba7a978c29d0b5be86	4 years ago
George Joseph	d454801c2d	res_rtp_asterisk: Asterisk Media Experience Score (MES) ... This module has been updated to provide additional quality statistics in the form of an Asterisk Media Experience Score. The score is avilable using the same mechanisms you'd use to retrieve jitter, loss, and rtt statistics. For more information about the score and how to retrieve it, see https://wiki.asterisk.org/wiki/display/AST/Media+Experience+Score * Updated chan_pjsip to set quality channel variables when a call ends. * Updated channels/pjsip/dialplan_functions.c to add the ability to retrieve the MES along with the existing rtcp stats when using the CHANNEL dialplan function. * Added the ast_debug_rtp_is_allowed and ast_debug_rtcp_is_allowed checks for debugging purposes. * Added several function to time.h for manipulating time-in-samples and times represented as double seconds. * Updated rtp_engine.c to pass through the MES when stats are requested. Also debug output that dumps the stats when an rtp instance is destroyed. * Updated res_rtp_asterisk.c to implement the calculation of the MES. In the process, also had to update the calculation of jitter. Many debugging statements were also changed to be more informative. * Added a unit test for internal testing. The test should not be run during normal operation and is disabled by default. ASTERISK-30280 Change-Id: I458cb9a311e8e5dc1db769b8babbcf2e093f107a	4 years ago
Naveen Albert	1e77b8c473	test_json: Remove duplicated static function. ... Removes the function mkstemp_file and uses ast_file_mkftemp from file.h instead. ASTERISK-30295 #close Change-Id: I7412ec06f88c39ee353bcdb8c976c2fcac546609	4 years ago
George Joseph	0c1c623dee	runUnittests.sh: Save coredumps to proper directory ... Fixed the specification of "outputdir" when calling ast_coredumper so the txt files are saved in the correct place. ASTERISK-30282 Change-Id: Ic631cb90c1e4c29d970c982dff45fda5e0eb15b6	4 years ago
Naveen Albert	ca8900b0f6	tests: Fix compilation errors on 32-bit. ... Fix compilation errors caused by using size_t instead of uintmax_t and non-portable format specifiers. ASTERISK-30273 #close Change-Id: I363e6057ef84d54b88af80d23ad6147eef9216ee	4 years ago
Philip Prindeville	d0bea5a725	res_crypto: handle unsafe private key files ... ASTERISK-30213 #close Change-Id: I4a77143d41615b7c4fc25bb1251c0a9cb87b417a	4 years ago
Philip Prindeville	3e7ce90f9c	test: initialize capture structure before freeing ... ASTERISK-30232 #close Change-Id: I2603e2cef8f93f6b0a6ef39f7eac744251bb3902	4 years ago
George Joseph	e25b690d10	res_crypto: Memory issues and uninitialized variable errors ... ASTERISK-30235 Change-Id: Ia1e326e7b52cd06fd5e6c9009e3e63193c92f6cd	4 years ago
George Joseph	8cbea1c7ef	res_geolocation: Fix segfault when there's an empty element ... Fixed a segfault caused by var_list_from_loc_info() encountering an empty location info element. Fixed an issue in ast_strsep() where a value with only whitespace wasn't being preserved. Fixed an issue in ast_variable_list_from_quoted_string() where an empty value was considered a failure. ASTERISK-30215 Reported by: Dan Cropp Change-Id: Ieca64e061a6d9298f0196c694b60d986ef82613a	4 years ago
Philip Prindeville	3e054c9ebc	res_crypto: Use EVP API's instead of legacy API's ... ASTERISK-30046 #close Change-Id: I5c738756de75fd27ebad54be144c0ac6193f21b2	4 years ago
Philip Prindeville	736cdf84f4	test: Add coverage for res_crypto ... We're validating the following functionality: encrypting a block of data with RSA decrypting a block of data with RSA signing a block of data with RSA verifying a signature with RSA encrypting a block of data with AES-ECB encrypting a block of data with AES-ECB as well as accessing test keys from the keystore. ASTERISK-30045 #close Change-Id: I0d10e7b41009c5290a4356c6480e636712d5c96d	4 years ago
Philip Prindeville	5809d879b0	test: Add test coverage for capture child process output ... ASTERISK-30037 #close Change-Id: I0273e85eeeb6b8e46703f24cd74d84f3daf0a69a	4 years ago
Mike Bradeen	adffb975dc	CI: Fixing path issue on venv check ... ASTERISK-26826 Change-Id: I07388d16f74452cebc9c981f99044eb6b77df792	4 years ago
Mike Bradeen	4fc9e06db1	CI: use Python3 virtual environment ... Requires Python3 testsuite changes ASTERISK-26826 Change-Id: I92ec7dec751ad455503a584d6e860db88c56d6bc	4 years ago
Joshua C. Colp	68bcf4c4c5	websocket / aeap: Handle poll() interruptions better. ... A sporadic test failure was happening when executing the AEAP Websocket transport tests. It was originally thought this was due to things not getting cleaned up fast enough, but upon further investigation I determined the underlying cause was poll() getting interrupted and this not being handled in all places. This change adds EINTR and EAGAIN handling to the Websocket client connect code as well as the AEAP Websocket transport code. If either occur then the code will just go back to waiting for data. The originally disabled failure test case has also been re-enabled. ASTERISK-30099 Change-Id: I1711a331ecf5d35cd542911dc6aaa9acf1e172ad	4 years ago
George Joseph	5fe9887701	Geolocation: Base Asterisk Prereqs ... * Added ast_variable_list_from_quoted_string() Parse a quoted string into an ast_variable list. * Added ast_str_substitute_variables_full2() Perform variable/function/expression substitution on an ast_str. * Added ast_strsep_quoted() Like ast_strsep except you can specify a specific quote character. Also added unit test. * Added ast_xml_find_child_element() Find a direct child element by name. * Added ast_xml_doc_dump_memory() Dump the specified document to a buffer * ast_datastore_free() now checks for a NULL datastore before attempting to destroy it. Change-Id: I5dcefed2f5f93a109e8b489e18d80d42e45244ec	4 years ago
Kevin Harwell	d9ce2a652b	test_aeap_transport: disable part of failing unit test ... The 'transport_binary' test sporadically fails, but on a theory that the problem is caused by a previously executed test, transport_connect_fail, part of that test has been disabled until a solution is found. ASTERISK_30099 Change-Id: I48ed74d696aa9b6159f59661f3d535cac4c909e1	4 years ago
Moritz Fain	4bf2473ac4	ari: expose channel driver's unique id to ARI channel resource ... This change exposes the channel driver's unique id (i.e. the Call-ID for chan_sip/chan_pjsip based channels) to ARI channel resources as `protocol_id`. ASTERISK-30027 Reported by: Moritz Fain Tested by: Moritz Fain Change-Id: I7cc6e7a9d29efe74bc27811d788dac20fe559b87	5 years ago
George Joseph	4aa541683b	GCC12: Fixes for 16+ ... Most issues were in stringfields and had to do with comparing a pointer to an constant/interned string with NULL. Since the string was a constant, a pointer to it could never be NULL so the comparison was always "true". gcc now complains about that. There were also a few issues where determining if there was enough space for a memcpy or s(n)printf which were fixed by defining some of the involved variables as "volatile". There were also a few other miscellaneous fixes. ASTERISK-30044 Change-Id: Ia081ca1bcfb329df6487c4660aaf1944309eb570	5 years ago
Kevin Harwell	272bac70dd	res_aeap & res_speech_aeap: Add Asterisk External Application Protocol ... Add framework to connect to, and read and write protocol based messages from and to an external application using an Asterisk External Application Protocol (AEAP). This has been divided into several abstractions: 1. transport - base communication layer (currently websocket only) 2. message - AEAP description and data (currently JSON only) 3. transaction - links/binds requests and responses 4. aeap - transport, message, and transaction handler/manager This patch also adds an AEAP implementation for speech to text. Existing speech API callbacks for speech to text have been completed making it possible for Asterisk to connect to a configured external translator service and provide audio for STT. Results can also be received from the external translator, and made available as speech results in Asterisk. Unit tests have also been created that test the AEAP framework, and also the speech to text implementation. ASTERISK-29726 #close Change-Id: Iaa4b259f84aa63501e5fd2a6fb107f900b4d4ed2	5 years ago
Naveen Albert	94df607771	build: Remove obsolete leftover build references. ... Removes some leftover build and config references to modules that have since been removed from Asterisk. ASTERISK-29935 #close Change-Id: Iaefc73a23f4b2de3c6c14d928050135b6d0ef6af	5 years ago
Sean Bright	c33718a54d	conversions.c: Specify that we only want to parse decimal numbers. ... Passing 0 as the last argument to strtoimax() or strtoumax() causes octal and hexadecimal to be accepted which was not originally intended. So we now force to only accept decimal. ASTERISK-29950 #close Change-Id: I93baf0f273441e8280354630a463df263a8c0edd	5 years ago
George Joseph	b40c4d59b1	xml.c, config,c: Add stylesheets and variable list string parsing ... Added functions to open, close, and apply XML Stylesheets to XML documents. Although the presence of libxslt was already being checked by configure, it was only happening if xmldoc was enabled. Now it's checked regardless. Added ability to parse a string consisting of comma separated name/value pairs into an ast_variable list. The reverse of ast_variable_list_join(). Change-Id: I1e1d149be22165a1fb8e88e2903a36bba1a6cf2e	5 years ago
George Joseph	b5391ff691	core: Config and XML tweaks needed for geolocation ... Added: Replace a variable in a list: int ast_variable_list_replace_variable(struct ast_variable **head, struct ast_variable *old, struct ast_variable *new); Added test as well. Create a "name=value" string from a variable list: 'name1="val1",name2="val2"', etc. struct ast_str *ast_variable_list_join( const struct ast_variable *head, const char *item_separator, const char *name_value_separator, const char *quote_char, struct ast_str **str); Added test as well. Allow the name of an XML element to be changed. void ast_xml_set_name(struct ast_xml_node *node, const char *name); Change-Id: I330a5f63dc0c218e0d8dfc0745948d2812141ccb	5 years ago
George Joseph	1950cec3fd	build: Refactor the earlier "basebranch" commit ... Recap from earlier commit: If you have a development branch for a major project that will receive gerrit reviews it'll probably be named something like "development/16/newproject" or a work branch based on that "development" branch. That will necessitate setting "defaultbranch=development/16/newproject" in .gitreview. The make_version script uses that variable to construct the asterisk version however, which results in versions like "GIT-development/16/newproject-ee582a8c7b" which is probably not what you want. It also constructs the URLs for downloading external modules with that version, which will fail. Fast-forward: The earlier attempt at adding a "basebranch" variable to .gitreview didn't work out too well in practice because changes were made to .gitreview, which is a checked-in file. So, if you wanted to rebase your work branch on the base branch, rebase would attempt to overwrite your .gitreview with the one from the base branch and complain about a conflict. This is a slighltly different approach that adds three methods to determine the mainline branch: 1. --- MAINLINE_BRANCH from the environment If MAINLINE_BRANCH is already set in the environment, that will be used. This is primarily for the Jenkins jobs. 2. --- .develvars Instead of storing the basebranch in .gitreview, it can now be stored in a non-checked-in ".develvars" file and keyed by the current branch. So, if you were working on a branch named "new-feature-work" based on "development/16/new-feature" and wanted to push to that branch in Gerrit but wanted to pull the external modules for 16, you'd create the following .develvars file: [branch "new-feature-work"] mainline-branch = 16 The .gitreview file would still look like: [gerrit] defaultbranch=development/16/new-feature ...which would cause any reviews pushed from "new-feature-work" to go to the "development/16/new-feature" branch in Gerrit. The key is that the .develvars file is NEVER checked in (it's been added to .gitignore). 3. --- Well Known Development Branch If you're actually working in a branch named like "development/<mainline_branch>/some-feature", the mainline branch will be parsed from it. 4. --- .gitreview If none of the earlier conditions exist, the .gitreview "defaultbranch" variable will be used just as before. Change-Id: I1cdeeaa0944bba3f2e01d7a2039559d0c266f8c9	5 years ago
Naveen Albert	e26b57984f	asterisk: Add macro for curl user agent. ... Currently, each module that uses libcurl duplicates the standard Asterisk curl user agent. This adds a global macro for the Asterisk user agent used for curl requests to eliminate this duplication. ASTERISK-29861 #close Change-Id: I9fc37935980384b4daf96ae54fa3c9adb962ed2d	5 years ago
Naveen Albert	386c5e495f	cdr: allow disabling CDR by default on new channels ... Adds a new option, defaultenabled, to the CDR core to control whether or not CDR is enabled on a newly created channel. This allows CDR to be disabled by default on new channels and require the user to explicitly enable CDR if desired. Existing behavior remains unchanged. ASTERISK-29808 #close Change-Id: Ibb78c11974bda229bbb7004b64761980e0b2c6d1	5 years ago