8746 Commits (85f5a047c121542c3e106c221b51b21ddb36dd15)

Author	SHA1	Message	Date
Naveen Albert	9ced75008a	chan_iax2: Add log message for rejected calls. ... Add a log message for a path that currently silently drops IAX2 frames without indicating that anything is wrong.	10 months ago
Maximilian Fridrich	f1f521d366	chan_pjsip: Send VIDUPDATE RTP frame for all H.264 streams ... Currently, when a chan_pjsip channel receives a VIDUPDATE indication, an RTP VIDUPDATE frame is only queued on a H.264 stream if WebRTC is enabled on that endpoint. This restriction does not really make sense. Now, a VIDUPDATE RTP frame is written even if WebRTC is not enabled (as is the case with VP8, VP9, and H.265 streams). Resolves: #1013	10 months ago
Naveen Albert	7a4036574c	sig_analog: Fix regression with FGD and E911 signaling. ... Commit 466eb4a52b introduced a regression which completely broke Feature Group D and E911 signaling, by removing the call to analog_my_getsigstr, which affected multiple switch cases. Restore the original behavior for all protocols except Feature Group C CAMA (MF), which is all that patch was attempting to target. Resolves: #993	11 months ago
Naveen Albert	63e9cc19d1	chan_dahdi: Never send MWI while off-hook. ... In some circumstances, it is possible for the do_monitor thread to erroneously think that a line is on-hook and send an MWI FSK spill to it when the line is really off-hook and no MWI should be sent. Commit 0a8b3d3467 previously fixed this issue in a more readily encountered scenario, but it has still been possible for MWI to be sent when it shouldn't be. To robustly fix this issue, query DAHDI for the hook status to ensure we don't send MWI on a line that is actually still off hook. Resolves: #928	1 year ago
Mike Bradeen	e7ca7aa881	res_pjsip_notify: add dialplan application ... Add dialplan application PJSIPNOTIFY to send either pre-configured NOTIFY messages from pjsip_notify.conf or with headers defined in dialplan. Also adds the ability to send pre-configured NOTIFY commands to a channel via the CLI. Resolves: #799 UserNote: A new dialplan application PJSIPNotify is now available which can send SIP NOTIFY requests from the dialplan. The pjsip send notify CLI command has also been enhanced to allow sending NOTIFY messages to a specific channel. Syntax: pjsip send notify <option> channel <channel>	1 year ago
Ben Ford	3841fa814e	channel: Add multi-tenant identifier. ... This patch introduces a new identifier for channels: tenantid. It's a stringfield on the channel that can be used for general purposes. It will be inherited by other channels the same way that linkedid is. You can set tenantid in a few ways. The first is to set it in the dialplan with the Set and CHANNEL functions: exten => example,1,Set(CHANNEL(tenantid)=My tenant ID) It can also be accessed via CHANNEL: exten => example,2,NoOp(CHANNEL(tenantid)) Another method is to use the new tenantid option for pjsip endpoints in pjsip.conf: [my_endpoint] type=endpoint tenantid=My tenant ID This is considered the best approach since you will be able to see the tenant ID as early as the Newchannel event. It can also be set using set_var in pjsip.conf on the endpoint like setting other channel variable: set_var=CHANNEL(tenantid)=My tenant ID Note that set_var will not show tenant ID on the Newchannel event, however. Tenant ID has also been added to CDR. It's read-only and can be accessed via CDR(tenantid). You can also get the tenant ID of the last channel communicated with via CDR(peertenantid). Tenant ID will also show up in CEL records if it has been set, and the version number has been bumped accordingly. Fixes: #740 UserNote: tenantid has been added to channels. It can be read in dialplan via CHANNEL(tenantid), and it can be set using Set(CHANNEL(tenantid)=My tenant ID). In pjsip.conf, it is recommended to use the new tenantid option for pjsip endpoints (e.g., tenantid=My tenant ID) so that it will show up in Newchannel events. You can set it like any other channel variable using set_var in pjsip.conf as well, but note that this will NOT show up in Newchannel events. Tenant ID is also available in CDR and can be accessed with CDR(tenantid). The peer tenant ID can also be accessed with CDR(peertenantid). CEL includes tenant ID as well if it has been set. UpgradeNote: A new versioned struct (ast_channel_initializers) has been added that gets passed to __ast_channel_alloc_ap. The new function ast_channel_alloc_with_initializers should be used when creating channels that require the use of this struct. Currently the only value in the struct is for tenantid, but now more fields can be added to the struct as necessary rather than the __ast_channel_alloc_ap function. A new option (tenantid) has been added to endpoints in pjsip.conf as well. CEL has had its version bumped to include tenant ID.	1 year ago
Sean Bright	78d63bc11c	pjsip: Add PJSIP_PARSE_URI_FROM dialplan function. ... Various SIP headers permit a URI to be prefaced with a `display-name` production that can include characters (like commas and parentheses) that are problematic for Asterisk's dialplan parser and, specifically in the case of this patch, the PJSIP_PARSE_URI function. This patch introduces a new function - `PJSIP_PARSE_URI_FROM` - that behaves identically to `PJSIP_PARSE_URI` except that the first argument is now a variable name and not a literal URI. Fixes #756	1 year ago
Naveen Albert	4cf8d9d94a	callerid.c: Parse previously ignored Caller ID parameters. ... Commit f2f397c1a8 previously made it possible to send Caller ID parameters to FXS stations which, prior to that, could not be sent. This change is complementary in that we now handle receiving all these parameters on FXO lines and provide these up to the dialplan, via chan_dahdi. In particular: * If a redirecting reason is provided, the channel's redirecting reason is set. No redirecting number is set, since there is no parameter for this in the Caller ID protocol, but the reason can be checked to determine if and why a call was forwarded. * If the Call Qualifier parameter is received, the Call Qualifier variable is set. * Some comments have been added to explain why some of the code is the way it is, to assist other people looking at it. With this change, Asterisk's Caller ID implementation is now reasonably complete for both FXS and FXO operation. Resolves: #681	1 year ago
Naveen Albert	4ff93474df	chan_dahdi: Add DAHDIShowStatus AMI action. ... * Add an AMI action to correspond to the "dahdi show status" command, allowing span information to be retrieved via AMI. * Show span number and sig type in "dahdi show channels". Resolves: #673	2 years ago
George Joseph	9e2179baa1	Fix incorrect application and function documentation references ... There were a few references in the embedded documentation XML where the case didn't match or where the referenced app or function simply didn't exist any more. These were causing 404 responses in docs.asterisk.org.	2 years ago
Naveen Albert	63aa08fa0b	chan_dahdi: Don't retry opening nonexistent channels on restart. ... Commit 729cb1d390 added logic to retry opening DAHDI channels on "dahdi restart" if they failed initially, up to 1,000 times in a loop, to address cases where the channel was still in use. However, this retry loop does not use the actual error, which means chan_dahdi will also retry opening nonexistent channels 1,000 times per channel, causing a flood of unnecessary warning logs for an operation that will never succeed, with tens or hundreds of thousands of open attempts being made. The original patch would have been more targeted if it only retried on the specific relevant error (likely EBUSY, although it's hard to say since the original issue is no longer available). To avoid the problem above while avoiding the possibility of breakage, this skips the retry logic if the error is ENXIO (No such device or address), since this will never succeed. Resolves: #669	2 years ago
Naveen Albert	7f51313725	chan_dahdi: Allow specifying waitfordialtone per call. ... The existing "waitfordialtone" setting in chan_dahdi.conf applies permanently to a specific channel, regardless of how it is being used. This rather restrictively prevents a system from simultaneously being able to pick free lines for outgoing calls while also allowing barge-in to a trunk by some other arrangement. This allows specifying "waitfordialtone" using the CHANNEL function for only the next call that will be placed, allowing significantly more flexibility in the use of trunk interfaces. Resolves: #472 UserNote: "waitfordialtone" may now be specified for DAHDI trunk channels on a per-call basis using the CHANNEL function.	2 years ago
George Joseph	adcfbcd50e	pjsip show channelstats: Prevent possible segfault when faxing ... Under rare circumstances, it's possible for the original audio session in the active_media_state default_session to be corrupted instead of removed when switching to the t38/image media session during fax negotiation. This can cause a segfault when a "pjsip show channelstats" attempts to print that audio media session's rtp statistics. In these cases, the active_media_state topology is correctly showing only a single t38/image stream so we now check that there's an audio stream in the topology before attempting to use the audio media session to get the rtp statistics. Resolves: #592	2 years ago
Naveen Albert	4b908f364d	chan_dahdi: Allow MWI to be manually toggled on channels. ... This adds a CLI command to manually toggle the MWI status of a channel, useful for troubleshooting or resetting MWI devices, similar to the capabilities offered with SIP messaging to manually control MWI status. UserNote: The 'dahdi set mwi' now allows MWI on channels to be manually toggled if needed for troubleshooting. Resolves: #440	2 years ago
Naveen Albert	6fd6f22b2b	logger: Fix linking regression. ... Commit 008731b0a4 caused a regression by resulting in logger.xml being compiled and linked into the asterisk binary in lieu of logger.c on certain platforms if Asterisk was compiled in dev mode. To fix this, we ensure the file has a unique name without the extension. Most existing .xml files have been named differently from any .c files in the same directory or did not pose this issue. channels/pjsip/dialplan_functions.xml does not pose this issue but is also being renamed to adhere to this policy. Resolves: #539	2 years ago
PeterHolik	3b46872a8f	chan_rtp.c: MulticastRTP missing refcount without codec option ... Fixes: #529	2 years ago
PeterHolik	6fe045fd64	chan_rtp.c: Change MulticastRTP nameing to avoid memory leak ... Fixes: asterisk#536	2 years ago
Naveen Albert	c930230a73	sig_analog: Fix channel leak when mwimonitor is enabled. ... When mwimonitor=yes is enabled for an FXO port, the do_monitor thread will launch mwi_thread if it thinks there could be MWI on an FXO channel, due to the noise threshold being satisfied. This, in turns, calls analog_ss_thread_start in sig_analog. However, unlike all other instances where __analog_ss_thread is called in sig_analog, this call path does not properly set pvt->ss_astchan to the Asterisk channel, which means that the Asterisk channel is NULL when __analog_ss_thread starts executing. As a result, the thread exits and the channel is never properly cleaned up by calling ast_hangup. This caused issues with do_monitor on incoming calls, as it would think the channel was still owned even while receiving events, leading to an infinite barrage of warning messages; additionally, the channel would persist improperly. To fix this, the assignment is added to the call path where it is missing (which is only used for mwi_thread). A warning message is also added since previously there was no indication that __analog_ss_thread was exiting abnormally. This resolves both the channel leak and the condition that led to the warning messages. Resolves: #458	2 years ago
Naveen Albert	9211fb5e97	func_channel: Expose previously unsettable options. ... Certain channel options are not set anywhere or exposed in any way to users, making them unusable. This exposes some of these options which make sense for users to manipulate at runtime. Resolves: #442	2 years ago
Sean Bright	da4e6e7ddb	chan_iax2.c: Don't send unsanitized data to the logger. ... This resolves an issue where non-printable characters could be sent to the console/log files.	2 years ago
George Joseph	af7e89ebf8	chan_pjsip: Add PJSIPHangup dialplan app and manager action ... See UserNote below. Exposed the existing Hangup AMI action in manager.c so we can use all of it's channel search and AMI protocol handling without duplicating that code in dialplan_functions.c. Added a lookup function to res_pjsip.c that takes in the string represenation of the pjsip_status_code enum and returns the actual status code. I.E. ast_sip_str2rc("DECLINE") returns 603. This allows the caller to specify PJSIPHangup(decline) in the dialplan, just like Hangup(call_rejected). Also extracted the XML documentation to its own file since it was almost as large as the code itself. UserNote: A new dialplan app PJSIPHangup and AMI action allows you to hang up an unanswered incoming PJSIP call with a specific SIP response code in the 400 -> 699 range.	2 years ago
Sean Bright	19507ae160	chan_iax2.c: Ensure all IEs are displayed when dumping frame contents. ... When IAX2 debugging was enabled (`iax2 set debug on`), if the last IE in a frame was one that may not have any data - such as the CALLTOKEN IE in an NEW request - it was not getting displayed.	2 years ago
Naveen Albert	cdcdca5199	chan_dahdi: Warn if nonexistent cadence is requested. ... If attempting to ring a channel using a nonexistent cadence, emit a warning, before falling back to the default cadence. Resolves: #409	2 years ago
Naveen Albert	5b89e40541	chan_dahdi: Clarify scope of callgroup/pickupgroup. ... Internally, chan_dahdi only applies callgroup and pickupgroup to FXO signalled channels, but this is not documented anywhere. This is now documented in the sample config, and a warning is emitted if a user tries configuring these settings for channel types that do not support these settings, since they will not have any effect. Resolves: #294	2 years ago
Naveen Albert	3b027d1e47	chan_console: Fix deadlock caused by unclean thread exit. ... To terminate a console channel, stop_stream causes pthread_cancel to make stream_monitor exit. However, commit 5b8fea93d1 added locking to this function which results in deadlock due to the stream_monitor thread being killed while it's holding the pvt lock. To resolve this, a flag is now set and read to indicate abort, so the use of pthread_cancel and pthread_kill can be avoided altogether. Resolves: #308	2 years ago
Naveen Albert	f93138bcad	chan_iax2: Improve authentication debugging. ... Improves and adds some logging to make it easier for users to debug authentication issues. Resolves: #286	2 years ago
Maximilian Fridrich	1af2ae177c	chan_rtp: Implement RTP glue for UnicastRTP channels ... Resolves: #298 UserNote: The dial string option 'g' was added to the UnicastRTP channel which enables RTP glue and therefore native RTP bridges with those channels.	2 years ago
Naveen Albert	cd0bfe193f	sig_analog: Add Called Subscriber Held capability. ... This adds support for Called Subscriber Held for FXS lines, which allows users to go on hook when receiving a call and resume the call later from another phone on the same line, without disconnecting the call. This is a convenience mechanism that most real PSTN telephone switches support. ASTERISK-30372 #close Resolves: #240 UserNote: Called Subscriber Held is now supported for analog FXS channels, using the calledsubscriberheld option. This allows a station user to go on hook when receiving an incoming call and resume from another phone on the same line by going on hook, without disconnecting the call.	2 years ago
Naveen Albert	d16046e41f	chan_dahdi: Allow autoreoriginating after hangup. ... Currently, if an FXS channel is still off hook when all calls on the line have hung up, the user is provided reorder tone until going back on hook again. In addition to not reflecting what most commercial switches actually do, it's very common for switches to automatically reoriginate for the user so that dial tone is provided without the user having to depress and release the hookswitch manually. This can increase convenience for users. This behavior is now supported for kewlstart FXS channels. It's supported only for kewlstart (FXOKS) mainly because the behavior doesn't make any sense for ground start channels, and loop start signalling doesn't provide the necessary DAHDI event that makes this easy to implement. Likely almost everyone is using FXOKS over FXOLS anyways since FXOLS is pretty useless these days. ASTERISK-30357 #close Resolves: #224 UserNote: The autoreoriginate setting now allows for kewlstart FXS channels to automatically reoriginate and provide dial tone to the user again after all calls on the line have cleared. This saves users from having to manually hang up and pick up the receiver again before making another call.	2 years ago
Naveen Albert	e1a1ae933b	sig_analog: Allow three-way flash to time out to silence. ... sig_analog allows users to flash and use the three-way dial tone as a primitive hold function, simply by never timing it out. Some systems allow this dial tone to time out to silence, so the user is not annoyed by a persistent dial tone. This option allows the dial tone to time out normally to silence. ASTERISK-30004 #close Resolves: #205 UserNote: The threewaysilenthold option now allows the three-way dial tone to time out to silence, rather than continuing forever.	2 years ago
Sean Bright	508657879e	chan_iax2.c: Avoid crash with IAX2 switch support. ... A change made in 82cebaa0 did not properly handle the case when a channel was not provided, triggering a crash. ast_check_hangup(...) does not protect against NULL pointers. Fixes #180	2 years ago
Naveen Albert	8cd7548e43	sig_analog: Allow immediate fake ring to be suppressed. ... When immediate=yes on an FXS channel, sig_analog will start fake audible ringback that continues until the channel is answered. Even if it answers immediately, the ringback is still audible for a brief moment. This can be disruptive and unwanted behavior. This adds an option to disable this behavior, though the default behavior remains unchanged. ASTERISK-30003 #close Resolves: #118 UserNote: The immediatering option can now be set to no to suppress the fake audible ringback provided when immediate=yes on FXS channels.	2 years ago
Naveen Albert	4176f57938	chan_dahdi: Fix Caller ID presentation for FXO ports. ... Currently, the presentation for incoming channels is always available, because it is never actually set, meaning the channel presentation can be nonsensical. If the presentation from the incoming Caller ID spill is private or unavailable, we now update the channel presentation to reflect this. Resolves: #120 ASTERISK-30333 ASTERISK-21741	2 years ago
Naveen Albert	273ad73d99	sig_analog: Add fuller Caller ID support. ... A previous change, ASTERISK_29991, made it possible to send additional Caller ID parameters that were not previously supported. This change adds support for analog DAHDI channels to now be able to receive these parameters for on-hook Caller ID, in order to enhance the usability of CPE that support these parameters. Resolves: #94 ASTERISK-30331 UserNote: Additional Caller ID properties are now supported on incoming calls to FXS stations, namely the redirecting reason and call qualifier.	2 years ago
Maximilian Fridrich	18f0b6661a	chan_pjsip: Allow topology/session refreshes in early media state (#74) ... With this change, session modifications in the early media state are possible if the SDP was sent reliably and confirmed by a PRACK. For details, see RFC 6337, escpecially section 3.2. Resolves: #73	2 years ago
InterLinked1	200a3f1d68	chan_dahdi: Fix broken hidecallerid setting. (#101) ... The hidecallerid setting in chan_dahdi.conf currently is broken for a couple reasons. First, the actual code in sig_analog to "allow" or "block" Caller ID depending on this setting improperly used ast_set_callerid instead of updating the presentation. This issue was mostly fixed in ASTERISK_29991, and that fix is carried forward to this code as well. Secondly, the hidecallerid setting is set on the DAHDI pvt but not carried forward to the analog pvt properly. This is because the chan_dahdi config loading code improperly set permhidecallerid to permhidecallerid from the config file, even though hidecallerid is what is actually set from the config file. (This is done correctly for call waiting, a few lines above.) This is fixed to read the proper value. Thirdly, in sig_analog, hidecallerid is set to permhidecallerid only on hangup. This can lead to potential security vulnerabilities as an allowed Caller ID from an initial call can "leak" into subsequent calls if no hangup occurs between them. This is fixed by setting hidecallerid to permcallerid when calls begin, rather than when they end. This also means we don't need to also set hidecallerid in chan_dahdi.c when copying from the config, as we would have to otherwise. Fourthly, sig_analog currently only allows dialing *67 or *82 if that would actually toggle the presentation. A comment is added clarifying that this behavior is okay. Finally, a couple log messages are updated to be more accurate. Resolves: #100 ASTERISK-30349 #close	2 years ago
Naveen Albert	9a999242b2	chan_dahdi: Add dialmode option for FXS lines. ... Currently, both pulse and tone dialing are always enabled on all FXS lines, with no way of disabling one or the other. In some circumstances, it is desirable or necessary to disable one of these, and this behavior can be problematic. A new "dialmode" option is added which allows setting the methods to support on a per channel basis for FXS (FXO signalled lines). The four options are "both", "pulse", "dtmf"/"tone", and "none". Additionally, integration with the CHANNEL function is added so that this setting can be updated for a channel during a call. Resolves: #35 ASTERISK-29992 UserNote: A "dialmode" option has been added which allows specifying, on a per-channel basis, what methods of subscriber dialing (pulse and/or tone) are permitted. Additionally, this can be changed on a channel at any point during a call using the CHANNEL function.	2 years ago
Naveen Albert	73103bdcd5	chan_iax2: Fix jitterbuffer regression prior to receiving audio. ... ASTERISK_29392 (a security fix) introduced a regression by not processing frames when we don't have an audio format. Currently, chan_iax2 only calls jb_get to read frames from the jitterbuffer when the voiceformat has been set on the pvt. However, this only happens when we receive a voice frame, which means that prior to receiving voice frames, other types of frames get stalled completely in the jitterbuffer. To fix this, we now fallback to using the format negotiated during call setup until we've actually received a voice frame with a format. This ensures we're always able to read from the jitterbuffer. ASTERISK-30354 #close ASTERISK-30162 #close Change-Id: Ie4fd1e8e088a145ad89e0427c2100a530e964fe9	3 years ago
Mike Bradeen	6b03d60c7d	res_monitor: Remove deprecated module. ... ASTERISK-30303 Change-Id: I0462caefb4f9544e2e2baa23c498858310b52d50	3 years ago
Mike Bradeen	e8f548c155	app_macro: Remove deprecated module. ... For most modules that interacted with app_macro, this change is limited to no longer looking for the current context from the macrocontext when set. Additionally, the following modules are impacted: app_dial - no longer supports M^ connected/redirecting macro app_minivm - samples written using macro will no longer work. The sample needs a re-write app_queue - can no longer a macro on the called party's channel. Use gosub which is currently supported ccss - no callback macro, gosub only app_voicemail - no macro support channel - remove macrocontext and priority, no connected line or redirection macro options options - stdexten is deprecated to gosub as the default and only pbx - removed macrolock pbx_dundi - no longer look for macro snmp - removed macro context, exten, and priority ASTERISK-30304 Change-Id: I830daab293117179b8d61bd4df0d971a1b3d07f6	3 years ago
Igor Goncharovsky	410150235a	res_pjsip_rfc3326: Add SIP causes support for RFC3326 ... Add ability to set HANGUPCAUSE when SIP causecode received in BYE (in addition to currently supported Q.850). ASTERISK-30319 #close Change-Id: I3f55622dc680ce713a2ffb5a458ef5dd39fcf645	3 years ago
George Joseph	7dc8773178	res_rtp_asterisk: Asterisk Media Experience Score (MES) ... ----------------- This commit reinstates MES with some casting fixes to the functions in time.h that convert between doubles and timeval structures. The casting issues were causing incorrect timestamps to be calculated which caused transcoding from/to G722 to produce bad or no audio. ASTERISK-30391 ----------------- This module has been updated to provide additional quality statistics in the form of an Asterisk Media Experience Score. The score is avilable using the same mechanisms you'd use to retrieve jitter, loss, and rtt statistics. For more information about the score and how to retrieve it, see https://wiki.asterisk.org/wiki/display/AST/Media+Experience+Score * Updated chan_pjsip to set quality channel variables when a call ends. * Updated channels/pjsip/dialplan_functions.c to add the ability to retrieve the MES along with the existing rtcp stats when using the CHANNEL dialplan function. * Added the ast_debug_rtp_is_allowed and ast_debug_rtcp_is_allowed checks for debugging purposes. * Added several function to time.h for manipulating time-in-samples and times represented as double seconds. * Updated rtp_engine.c to pass through the MES when stats are requested. Also debug output that dumps the stats when an rtp instance is destroyed. * Updated res_rtp_asterisk.c to implement the calculation of the MES. In the process, also had to update the calculation of jitter. Many debugging statements were also changed to be more informative. * Added a unit test for internal testing. The test should not be run during normal operation and is disabled by default. Change-Id: I4fce265965e68c3fdfeca55e614371ee69c65038	3 years ago
George Joseph	3a3d6c7dcb	Revert "res_rtp_asterisk: Asterisk Media Experience Score (MES)" ... This reverts commit e66c5da145. Reason for revert: Issue when transcoding to/from g722 Change-Id: I12853c5b1d3a77f5b9200f41908fd238a17159dc	3 years ago
Mike Bradeen	4095a382da	chan_sip: Remove deprecated module. ... ASTERISK-30297 Change-Id: Ic700168c80b68879d9cee8bb07afe2712fb17996	3 years ago
George Joseph	e66c5da145	res_rtp_asterisk: Asterisk Media Experience Score (MES) ... This module has been updated to provide additional quality statistics in the form of an Asterisk Media Experience Score. The score is avilable using the same mechanisms you'd use to retrieve jitter, loss, and rtt statistics. For more information about the score and how to retrieve it, see https://wiki.asterisk.org/wiki/display/AST/Media+Experience+Score * Updated chan_pjsip to set quality channel variables when a call ends. * Updated channels/pjsip/dialplan_functions.c to add the ability to retrieve the MES along with the existing rtcp stats when using the CHANNEL dialplan function. * Added the ast_debug_rtp_is_allowed and ast_debug_rtcp_is_allowed checks for debugging purposes. * Added several function to time.h for manipulating time-in-samples and times represented as double seconds. * Updated rtp_engine.c to pass through the MES when stats are requested. Also debug output that dumps the stats when an rtp instance is destroyed. * Updated res_rtp_asterisk.c to implement the calculation of the MES. In the process, also had to update the calculation of jitter. Many debugging statements were also changed to be more informative. * Added a unit test for internal testing. The test should not be run during normal operation and is disabled by default. ASTERISK-30280 Change-Id: I458cb9a311e8e5dc1db769b8babbcf2e093f107a	3 years ago
Mike Bradeen	de3ce178ab	chan_alsa: Remove deprecated module. ... ASTERISK-30298 Change-Id: I5c8afb781528afdf55d237e3bffa5e4a862ae8c7	3 years ago
Mike Bradeen	89a7d30a97	chan_mgcp: Remove deprecated module. ... Also removes res_pktcops to avoid merge conflicts with ASTERISK~30301. ASTERISK-30299 Change-Id: I41a316d327646a197b6f112f7f637aceb5111b41	3 years ago
Naveen Albert	48b5a4def0	sig_analog: Fix no timeout duration. ... ASTERISK_28702 previously attempted to fix an issue with flash hook hold timing out after just under 17 minutes, when it should have never been timing out. It fixed this by changing 999999 to INT_MAX, but it did so in chan_dahdi, which is the wrong place since ss_thread is now in sig_analog and the one in chan_dahdi is mostly dead code. This fixes this by porting the fix to sig_analog. ASTERISK-30336 #close Change-Id: I05eb69cc0b5319d357842a70bd26ef64d145cb15	3 years ago
Mike Bradeen	8d652ab4be	chan_skinny: Remove deprecated module. ... ASTERISK-30300 Change-Id: I8be11455010b8ec552e62b0719368342e8a1bae9	3 years ago
Naveen Albert	67186aad56	chan_dahdi: Allow FXO channels to start immediately. ... Currently, chan_dahdi will wait for at least one ring before an incoming call can enter the dialplan. This is generally necessary in order to receive the Caller ID spill and/or distinctive ringing detection. However, if neither of these is required, then there is nothing gained by waiting for one ring and this unnecessarily delays call setup. Users can now use immediate=yes to make FXO channels (FXS signaled) begin processing dialplan as soon as Asterisk receives the call. ASTERISK-30305 #close Change-Id: I20818b370b2e4892c7f40c8a8753fa06a81750b5	3 years ago