14 Commits (7d606d87bfb7eeacda9fcc3575f9383d29731d2e)

Author	SHA1	Message	Date
Richard Mudgett	4b363688d4	AMI: Make AMI actions that generate event lists consistent. ... * Made the following AMI actions use list API calls for consistency: Agents BridgeInfo BridgeList BridgeTechnologyList ConfbridgeLIst ConfbridgeLIstRooms CoreShowChannels DAHDIShowChannels DBGet DeviceStateList ExtensionStateList FAXSessions Hangup IAXpeerlist IAXpeers IAXregistry MeetmeList MeetmeListRooms MWIGet ParkedCalls Parkinglots PJSIPShowEndpoint PJSIPShowEndpoints PJSIPShowRegistrationsInbound PJSIPShowRegistrationsOutbound PJSIPShowResourceLists PJSIPShowSubscriptionsInbound PJSIPShowSubscriptionsOutbound PresenceStateList PRIShowSpans QueueStatus QueueSummary ShowDialPlan SIPpeers SIPpeerstatus SIPshowregistry SKINNYdevices SKINNYlines Status VoicemailUsersList * Incremented the AMI version to 2.7.0. * Changed astman_send_listack() to not use the listflag parameter and always set the value to "Start" so the start capitalization is consistent. i.e., The FAXSessions used "Start" while the rest of the system used "start". The corresponding complete event always used "Complete". * Fixed ami_show_resource_lists() "PJSIPShowResourceLists" to output the AMI ActionID for all of its list events. * Fixed off-nominal AMI protocol error in manager_bridge_info(), manager_parking_status_single_lot(), and manager_parking_status_all_lots(). Use of astman_send_error() after responding to the original AMI action request violates the action response pattern by sending two responses. * Fixed minor protocol error in action_getconfig() when no requested categories are found. Each line needs to be formatted as "Header: text". * Fixed off-nominal memory leak in manager_build_parked_call_string(). * Eliminated unnecessary use of RAII_VAR() in ami_subscription_detail(). ASTERISK-24049 #close Reported by: Jonathan Rose Review: https://reviewboard.asterisk.org/r/4315/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430434 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	4445ee7fc0	AMI: Allow for command response documentation ... Allow for responses to AMI actions/commands to be documented properly in XML and displayed via the CLI. Response events are documented exactly as standard AMI events are documented. Review: https://reviewboard.asterisk.org/r/3812/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419342 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	abd3e4040b	Allow Asterisk to compile under GCC 4.10 ... This resolves a large number of compiler warnings from GCC 4.10 which cause the build to fail under dev mode. The vast majority are signed/unsigned mismatches in printf-style format strings. ........ Merged revisions 413586 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 413587 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 413588 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413589 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	b0bb03e916	bridging: Give bridges a name and a known creator ... Bridges have two new optional properties, a creator and a name. Certain consumers of bridges will automatically provide bridges that they create with these properties. Examples include app_bridgewait, res_parking, app_confbridge, and app_agent_pool. In addition, a name may now be provided as an argument to the POST function for creating new bridges via ARI. (closes issue AFS-47) Review: https://reviewboard.asterisk.org/r/3070/ ........ Merged revisions 404042 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404043 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Scott Griepentrog	3b36687a56	Manager: Add equivalent AMI actions for the bridge CLI commands. ... Adds the following AMI events, closely following their CLI counterparts: BridgeDestroy BridgeKick BridgeTechnologyList BridgeTechnologySuspend BridgeTechnologyUnsuspend BridgeDestroy kicks an entire bridge, where BridgeKick kicks just one channel off the bridge. When kicking a channel, specifying the bridge also (optional) insures it is not removed from the wrong bridge. The BridgeTechnology events allow viewing and changing suspension status, which affects only subsequent not active bridging. (closes ASTERISK-22356) Reported by: Richard Mudgett Review: https://reviewboard.asterisk.org/r/2973/ ........ Merged revisions 402387 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402388 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	2de42c2a25	Multiple revisions 399887,400138,400178,400180-400181 ... ........ r399887 | dlee | 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) | 1 line Minor performance bump by not allocate manager variable struct if we don't need it ........ r400138 | dlee | 2013-09-30 10:24:00 -0500 (Mon, 30 Sep 2013) | 23 lines Stasis performance improvements This patch addresses several performance problems that were found in the initial performance testing of Asterisk 12. The Stasis dispatch object was allocated as an AO2 object, even though it has a very confined lifecycle. This was replaced with a straight ast_malloc(). The Stasis message router was spending an inordinate amount of time searching hash tables. In this case, most of our routers had 6 or fewer routes in them to begin with. This was replaced with an array that's searched linearly for the route. We more heavily rely on AO2 objects in Asterisk 12, and the memset() in ao2_ref() actually became noticeable on the profile. This was #ifdef'ed to only run when AO2_DEBUG was enabled. After being misled by an erroneous comment in taskprocessor.c during profiling, the wrong comment was removed. Review: https://reviewboard.asterisk.org/r/2873/ ........ r400178 | dlee | 2013-09-30 13:26:27 -0500 (Mon, 30 Sep 2013) | 24 lines Taskprocessor optimization; switch Stasis to use taskprocessors This patch optimizes taskprocessor to use a semaphore for signaling, which the OS can do a better job at managing contention and waiting that we can with a mutex and condition. The taskprocessor execution was also slightly optimized to reduce the number of locks taken. The only observable difference in the taskprocessor implementation is that when the final reference to the taskprocessor goes away, it will execute all tasks to completion instead of discarding the unexecuted tasks. For systems where unnamed semaphores are not supported, a really simple semaphore implementation is provided. (Which gives identical performance as the original taskprocessor implementation). The way we ended up implementing Stasis caused the threadpool to be a burden instead of a boost to performance. This was switched to just use taskprocessors directly for subscriptions. Review: https://reviewboard.asterisk.org/r/2881/ ........ r400180 | dlee | 2013-09-30 13:39:34 -0500 (Mon, 30 Sep 2013) | 28 lines Optimize how Stasis forwards are dispatched This patch optimizes how forwards are dispatched in Stasis. Originally, forwards were dispatched as subscriptions that are invoked on the publishing thread. This did not account for the vast number of forwards we would end up having in the system, and the amount of work it would take to walk though the forward subscriptions. This patch modifies Stasis so that rather than walking the tree of forwards on every dispatch, when forwards and subscriptions are changed, the subscriber list for every topic in the tree is changed. This has a couple of benefits. First, this reduces the workload of dispatching messages. It also reduces contention when dispatching to different topics that happen to forward to the same aggregation topic (as happens with all of the channel, bridge and endpoint topics). Since forwards are no longer subscriptions, the bulk of this patch is simply changing stasis_subscription objects to stasis_forward objects (which, admittedly, I should have done in the first place.) Since this required me to yet again put in a growing array, I finally abstracted that out into a set of ast_vector macros in asterisk/vector.h. Review: https://reviewboard.asterisk.org/r/2883/ ........ r400181 | dlee | 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) | 28 lines Remove dispatch object allocation from Stasis publishing While looking for areas for performance improvement, I realized that an unused feature in Stasis was negatively impacting performance. When a message is sent to a subscriber, a dispatch object is allocated for the dispatch, containing the topic the message was published to, the subscriber the message is being sent to, and the message itself. The topic is actually unused by any subscriber in Asterisk today. And the subscriber is associated with the taskprocessor the message is being dispatched to. First, this patch removes the unused topic parameter from Stasis subscription callbacks. Second, this patch introduces the concept of taskprocessor local data, data that may be set on a taskprocessor and provided along with the data pointer when a task is pushed using the ast_taskprocessor_push_local() call. This allows the task to have both data specific to that taskprocessor, in addition to data specific to that invocation. With those two changes, the dispatch object can be removed completely, and the message is simply refcounted and sent directly to the taskprocessor. Review: https://reviewboard.asterisk.org/r/2884/ ........ Merged revisions 399887,400138,400178,400180-400181 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400186 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	3f724fa493	Make bridge snapshots use prefixes. ... * Changed ast_manager_build_bridge_state_string() to assume an empty prefix string just like ast_manager_build_channel_state_string(). * Created ast_manager_build_bridge_state_string_prefix() to work just like ast_manager_build_channel_state_string_prefix(). * Made BridgeMerge AMI event use To/From prefixes. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396417 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	33e7b76d1d	Hide the Surrogate channels from external consumers; kill Masquerade events ... This patch does three things: 1. It provides a Surrogate channel technology with a consolidated "implementation detail flag" on the channel technology. This tells consumers of Stasis that the creation of this channel is an implementation detail in Asterisk and can be ignored (if they so choose). This consolidates the conference recorder/announcer flags as well - these flags had no additional meaning beyond "ignore this channel please". 2. It modifies allocation of a channel in two ways: (a) If a channel technology can be determined from the name, we set it directly in the allocation routine. This prevents the initial publication of the message from going out with a NULL channel technology where possible. This lets Stasis consumers get the right channel technology on the first publication. (b) It reorganizes allocation to make use of the 'finalized' property on the channel. This was already used to know that a channel had completely finished its construction in the masquerade routine; now we also use it to know whether or not the setting of certain channel properties is occurring during or post construction. The various set routines were modified accordingly as well. 3. The masquerade event is now dead, Jim. It no longer served any purpose whatsoever - if you perform a call pickup you'll get a Pickup event; if you perform an attended transfer you will still get those events; if you steal a channel to put it elsewhere you'll get the corresponding NewExten or BridgeEnter events. Review: https://reviewboard.asterisk.org/r/2740 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396392 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	2977846f0a	Don't unsubscribe from the AMI message router from manager_bridges ... The AMI message router is owned wholly by manager.c. Previously, each of the manager_{item} source files had their own message router and they unsubscribed from each; once they moved over to using a single message router only a single unsubscribe became necessary. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396158 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	328e99f41d	Make a couple of changes to help AMI events to be more clear in what is occurring. ... * BridgeEnter now contains the unique ID of the channel that is to be swapped out, if applicable. * There is a ParkedCallSwap event that is sent when a parked channel has a new channel take its place. (closes issue ASTERISK-22193) reported by Mark Michelson Review: https://reviewboard.asterisk.org/r/2712 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396107 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	03090a88ba	Fix documentation replication issues ... This prevents XML documentation duplication by expanding channel and bridge snapshot tags into channel and bridge snapshot parameter sets with a given prefix or defaulting to no prefix. This also prevents documentation from becoming fractured and out of date by keeping all variations of the documentation in template form such that it only needs to be updated once and keeps maintenance to a minimum. Review: https://reviewboard.asterisk.org/r/2708/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395985 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	e1b959ccbb	Split caching out from the stasis_caching_topic. ... In working with res_stasis, I discovered a significant limitation to the current structure of stasis_caching_topics: you cannot subscribe to cache updates for a single channel/bridge/endpoint/etc. To address this, this patch splits the cache away from the stasis_caching_topic, making it a first class object. The stasis_cache object is shared amongst individual stasis_caching_topics that are created per channel/endpoint/etc. These are still forwarded to global whatever_all_cached topics, so their use from most of the code does not change. In making these changes, I noticed that we frequently used a similar pattern for bridges, endpoints and channels: single_topic ----------------> all_topic ^ | single_topic_cached ----+----> all_topic_cached | +----> cache This pattern was extracted as the 'Stasis Caching Pattern', defined in stasis_caching_pattern.h. This avoids a lot of duplicate code between the different domain objects. Since the cache is now disassociated from its upstream caching topics, this also necessitated a change to how the 'guaranteed' flag worked for retrieving from a cache. The code for handling the caching guarantee was extracted into a 'stasis_topic_wait' function, which works for any stasis_topic. (closes issue ASTERISK-22002) Review: https://reviewboard.asterisk.org/r/2672/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395954 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	56a90d435c	Fix incorrect reference to stasis/bridging.h ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395381 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	cafc115896	A great big renaming patch ... This patch renames the bridging* files to bridge*. This may seem pedantic and silly, but it fits better in line with current Asterisk naming conventions: * channel is not "channeling" * monitor is not "monitoring" etc. A bridge is an object. It is a first class citizen in Asterisk. "Bridging" is the act of using a bridge on a set of channels - and the API that fulfills that role is more than just the action. (closes issue ASTERISK-22130) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395378 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago