This allows for the variables to be accessed if a member macro is run.
Thanks to Grigoriy Puzankin for bringing this up on the -dev list.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@188032 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The channel drivers which have been most heavily tested with these enhancements are
chan_sip and chan_misdn. Further work is being done to add Q.SIG support and will be
introduced in a later commit. chan_skinny has code added to it here, but according
to user pj, the support on chan_skinny is not working as of now. This will be fixed in
a later commit.
A special thanks goes out to bugtracker user gareth for getting the ball rolling and
providing the initial support for this work. Without his initial work on this, this would
not have been nearly as painless as it was.
This functionality has been tested by Digium's product quality department, as well as a
customer site running thousands of calls every day. In addition, many many many many bugtracker
users have tested this, too.
(closes issue #8824)
Reported by: gareth
Review: http://reviewboard.digium.com/r/201
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186525 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r185031 | mmichelson | 2009-03-30 11:17:35 -0500 (Mon, 30 Mar 2009) | 39 lines
Fix queue weight behavior so that calls in low-weight queues are not inappropriately blocked.
(This is copied and pasted from the review request I made for this patch)
Asterisk has some odd behavior when queue weights are used. The current logic used when
potentially calling a queue member is:
If the member we are going to call is part of another queue and _that other queue has any
callers in it_ and has a higher weight than the queue we are calling from, then don't try
to contact that member. The issue here is what I have marked with underscores. If the
higher-weighted queue has any callers in it at all, then the queue member will be unreachable
from the lower-weighted queue. This has the potential to be really really bad if using a
queue strategy, such as leastrecent or fewestcalls, with the potential to call the same
member repeatedly.
The fix proposed by garychen on issue 13220 is very simple and, as far as I can see, works
well for this situation. With this set of changes, the logic used becomes:
If the member we are going to call is part of another queue, the other queue has a higher
weight than the queue we are calling from, and the higher weight queue has at least as many
callers as available members, then do not try to contact the queue member. If the higher
weighted queue has fewer callers than available members, then there is no reason to deny
the call to this member since the other queue can afford to spare a member.
Since the fix involved writing a generic function for determining the number of available
members in the queue, I also modified the is_our_turn function to make use of the new
num_available_members function to determine if it is our turn to try calling a member. There
is one small behavior change. Before writing this patch, if you had autofill disabled, then
if you were the head caller in a queue, you would automatically be told that it was your
turn to try calling a member. This did not take into account whether there were actually any
queue members available to take the call. Now we actually make sure there is at least one
member available to take the call if autofill is disabled.
(closes issue #13220)
Reported by: garychen
Review: http://reviewboard.digium.com/r/202/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@185072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For every attempt that app_queue made to place an outbound call to a queue member,
we would allocate a queue_end_bridge structure. When the bridge for the call had
completed, we would free the structure. Unfortunately not all call attempts actually
end up bridged to a member, so we need to be more selective of when to allocate
the structure. With this change, the allocation occurs in an area where we can
guarantee that the call will be bridged.
(closes issue #14680)
Reported by: caspy
Patches:
14680.patch uploaded by mmichelson (license 60)
Tested by: caspy
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@183244 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If trying to dial a non-existent queue, there would
be a segfault when attempting to access q->weight, even
though q was NULL. This problem was introduced during
the queue-reset merge and thus only affects trunk.
(closes issue #14643)
Reported by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@181244 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r180006 | mmichelson | 2009-03-03 16:48:18 -0600 (Tue, 03 Mar 2009) | 17 lines
Clarify some documentation of queues.conf.sample
It had always been possible to explicitly specify a "blank"
value for a sound file in queues.conf and have no sound played
back. The problem with this is that it would result in some ugly
CLI warnings from file.c.
This commit introduces a check when playing a file in app_queue
to see if the name of the file is zero-length and return early if
that is the case. Also, the ability to specify the blank sound
files in queues.conf is now mentioned more clearly in queues.conf.sample
(closes issue #14227)
Reported by: caspy
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180007 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The problem here is that the hint processing code was subscribed to the wrong
event type. So, it started processing state for a hint too soon, before the
device state cache had been updated.
Also, fix a similar bug in app_queue, as it was also subscribed to the wrong
event type.
(closes issue #14461)
Reported by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From a user point-of-view, this adds new CLI commands and Manager Actions to
better facilitate the reloading of queues and the resetting of their statistics.
The new CLI commands are the "queue reload" and "queue reset stats" commands.
The new manager actions are the QueueReload and QueueReset commands.
Review: http://reviewboard.digium.com/r/115
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175663 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If someone has configured the queue to play an position or holdtime
announcement, then it is odd and potentially unexpected to hear a
"Thank you for your patience" sound when no position or holdtime
was actually announced.
This fixes the announcement so that the "thanks" sound is only played
in the case that a position or holdtime was actually announced.
There is a way that the "thank you" sound can be played without a
position or holdtime, and that is to set announce-frequency to a value
but keep announce-position and announce-holdtime both turned off.
(closes issue #14227)
Reported by: caspy
Patches:
14227_v3.patch uploaded by putnopvut (license 60)
Tested by: caspy
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@174948 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r173692 | mmichelson | 2009-02-05 14:29:09 -0600 (Thu, 05 Feb 2009) | 12 lines
Fix situations where queue members could be autopaused unexpectedly
Specifically, this patch prevents us from autopausing members when
we receive a busy or congestion frame from them.
(closes issue #14376)
Reported by: fiddur
Patches:
14376.patch uploaded by putnopvut (license 60)
Tested by: fiddur
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@173693 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also, implement a private cause code (as suggested by Tilghman). This works with
chan_sip, but doesn't propagate through chan_local.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172318 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is to avoid having the list and counter of missed calls being touched by queue calls. Add the C option to queue() and nothing
will be logged on phones that support the Reason: header on SIP cancel, like the SNOM phones.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@171924 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The data passed to the end_bridge_callback was assumed to be data which was
still stack'd. The problem was that with some call features, attended transfers
in particular, a new bridge thread is started once the feature completes, meaning
that when the end_bridge_callback is called, the end_bridge_callback_data was
invalid.
To fix this problem, there are two measures taken
1. Instead of pointing to stacked data, we now used heap-allocated data for
passing to the end_bridge_callback in app_queue
2. Since bridges can end multiple times on a single logical call, we wait until
the final bridge is broken to actually set any queue variables. This is accomplished
through reference-counting and the use of an end_bridge_callback_data_fixup function
in app_queue.c
(closes issue #14260)
Reported by: ccesario
Patches:
14260.patch uploaded by putnopvut (license 60)
Tested by: ccesario
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@171618 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The fix being applied is a bit different for trunk and the 1.6.X branches.
For trunk, we only wish to strip off the characters beyond the second slash
if the channel is a Local channel (i.e. we are removing the /n from the device
name). Other channel technologies with multiple slashes (e.g. DAHDI) need the
information after the second slash in order to get the proper device state
information.
In addition to this fix, the 1.6.X branches are receiving a much more important
fix as well. The problem in 1.6.X is that the member's device name was being directly
changed instead of having a copy changed. This meant that we would strip off the
second slash and trailing characters and then leave the member's device name like
that permanently thereafter.
(closes issue #14014)
Reported by: kebl0155
Patches:
14014_number2.patch uploaded by putnopvut (license 60)
Tested by: kebl0155
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@169611 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r168628 | mmichelson | 2009-01-14 18:11:01 -0600 (Wed, 14 Jan 2009) | 16 lines
Fix some crashes from bad datastore handling in app_queue.c
* The queue_transfer_fixup function was searching for and removing
the datastore from the incorrect channel, so this was fixed.
* Most datastore operations regarding the queue_transfer datastore
were being done without the channel locked, so proper channel locking
was added, too.
(closes issue #14086)
Reported by: ZX81
Patches:
14086v2.patch uploaded by putnopvut (license 60)
Tested by: ZX81, festr
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@168629 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The "No one is answering..." verbose message contained 3 numbers that were not
explained in any way to whoever was viewing the message. It is more helpful now
since the message explains what the numbers mean. Also, the message has been
downgraded to "DEBUG" level.
(closes issue #14172)
Reported by: caio1982
Patches:
queue_answering_debug.diff uploaded by caio1982 (license 22)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@168579 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the functionality to app_queue of calculating
the average amount of time that channels are bridged for a
queue. The algorithm used to calculate the average is the same
exponential average currently used to calculate the average holdtime.
See the CHANGES file to see the methods you may use to view this
information.
(closes issue #13960)
Reported by: coolmig
Patches:
app_queue.c.diff.trunk-r158840 uploaded by coolmig (license 621)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@167792 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When placing a call to a queue which ran a gosub on the member's
channel, Asterisk would crash every time, stemming from the fact
that the member's channel was being hung up unexpectedly when the
Gosub completed. The necessary change was pretty much copied and
pasted from app_dial's similar changes made last week.
I also took the opportunity to change a LOG_DEBUG message in
app_dial to use ast_debug. I am guessing this was due to a direct
merge from 1.4 that was not corrected to use trunk's preferred
syntax.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@166861 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
In order to merge this 1.4 patch into trunk,
I had to resolve some conflicts and wait for
Russell to make some changes to res_agi.
I re-ran all the tests; 39 calls in all, and
made fairly careful notes and comparisons: I
don't want this to blow up some aspect of
asterisk; I completely removed the KEEPALIVE
from the pbx.h decls. The first 3 scenarios
involving feature park; feature xfer to 700;
hookflash park to Park() app call all behave
the same, don't appear to leave hung channels,
and no crashes.
........
r166093 | murf | 2008-12-19 15:30:32 -0700 (Fri, 19 Dec 2008) | 131 lines
This merges the masqpark branch into 1.4
These changes eliminate the need for (and use of)
the KEEPALIVE return code in res_features.c;
There are other places that use this result code
for similar purposes at a higher level, these appear
to be left alone in 1.4, but attacked in trunk.
The reason these changes are being made in 1.4, is
that parking ends a channel's life, in some situations,
and the code in the bridge (and some other places),
was not checking the result code properly, and dereferencing
the channel pointer, which could lead to memory corruption
and crashes.
Calling the masq_park function eliminates this danger
in higher levels.
A series of previous commits have replaced some parking calls
with masq_park, but this patch puts them ALL to rest,
(except one, purposely left alone because a masquerade
is done anyway), and gets rid of the code that tests
the KEEPALIVE result, and the NOHANGUP_PEER result codes.
While bug 13820 inspired this work, this patch does
not solve all the problems mentioned there.
I have tested this patch (again) to make sure I have
not introduced regressions.
Crashes that occurred when a parked party hung up
while the parking party was listening to the numbers
of the parking stall being assigned, is eliminated.
These are the cases where parking code may be activated:
1. Feature one touch (eg. *3)
2. Feature blind xfer to parking lot (eg ##700)
3. Run Park() app from dialplan (eg sip xfer to 700)
(eg. dahdi hookflash xfer to 700)
4. Run Park via manager.
The interesting testing cases for parking are:
I. A calls B, A parks B
a. B hangs up while A is getting the numbers announced.
b. B hangs up after A gets the announcement, but
before the parking time expires
c. B waits, time expires, A is redialed,
A answers, B and A are connected, after
which, B hangs up.
d. C picks up B while still in parking lot.
II. A calls B, B parks A
a. A hangs up while B is getting the numbers announced.
b. A hangs up after B gets the announcement, but
before the parking time expires
c. A waits, time expires, B is redialed,
B answers, A and B are connected, after
which, A hangs up.
d. C picks up A while still in parking lot.
Testing this throroughly involves acting all the permutations
of I and II, in situations 1,2,3, and 4.
Since I added a few more changes (ALL references to KEEPALIVE in the bridge
code eliimated (I missed one earlier), I retested
most of the above cases, and no crashes.
H-extension weirdness.
Current h-extension execution is not completely
correct for several of the cases.
For the case where A calls B, and A parks B, the
'h' exten is run on A's channel as soon as the park
is accomplished. This is expected behavior.
But when A calls B, and B parks A, this will be
current behavior:
After B parks A, B is hung up by the system, and
the 'h' (hangup) exten gets run, but the channel
mentioned will be a derivative of A's...
Thus, if A is DAHDI/1, and B is DAHDI/2,
the h-extension will be run on channel
Parked/DAHDI/1-1<ZOMBIE>, and the
start/answer/end info will be those
relating to Channel A.
And, in the case where A is reconnected to
B after the park time expires, when both parties
hang up after the joyful reunion, no h-exten
will be run at all.
In the case where C picks up A from the
parking lot, when either A or C hang up,
the h-exten will be run for the C channel.
CDR's are a separate issue, and not addressed
here.
As to WHY this strange behavior occurs,
the answer lies in the procedure followed
to accomplish handing over the channel
to the parking manager thread. This procedure
is called masquerading. In the process,
a duplicate copy of the channel is created,
and most of the active data is given to the
new copy. The original channel gets its name
changed to XXX<ZOMBIE> and keeps the PBX
information for the sake of the original
thread (preserving its role as a call
originator, if it had this role to begin
with), while the new channel is without
this info and becomes a call target (a
"peer").
In this case, the parking lot manager
thread is handed the new (masqueraded)
channel. It will not run an h-exten
on the channel if it hangs up while
in the parking lot. The h exten will
be run on the original channel instead,
in the original thread, after the bridge
completes.
See bug 13820 for our intentions as
to how to clean up the h exten behavior.
Review: http://reviewboard.digium.com/r/29/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@166665 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r165255 | mmichelson | 2008-12-17 14:51:38 -0600 (Wed, 17 Dec 2008) | 7 lines
Fix some memory leaks found while looking at how realtime
configs are handled.
Also cleaned up some coding guidelines violations in app_realtime.c,
mostly related to spacing
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@165318 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix reference counting used in the __queues_show function
* Add code to be sure that the "queue show" command does not
print information for a realtime queue which has been deleted
from the backend
* Add a missing unref to the realtime queue loading function for
the case where a queue is in the module's container but has been
deleted from the realtime backend
(closes issue #14033)
Reported by: cristiandimache
Patches:
14033.patch uploaded by putnopvut (license 60)
Tested by: cristiandimache
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@164268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r163080 | mmichelson | 2008-12-11 10:24:43 -0600 (Thu, 11 Dec 2008) | 14 lines
Fix a potential crash due to unsafe datastore handling.
This patch also contains a conversion from using long to time_t
for representing times for a queue, as well as some whitespace
fixes.
(closes issue #14060)
Reported by: nivek
Patches:
datastore_fixup.patch.corrected uploaded by nivek (license 636)
with slight modification from me
Tested by: nivek
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163081 65c4cc65-6c06-0410-ace0-fbb531ad65f3
for app_dial and app_queue to run a gosub when the call is answered.
* Check for the existence of the gosub target in gosub_exec. If it is nonexistent,
then this will cause errors when we attempt to actually run the gosub, including
a definite memory leak and potential crashes. Return an error in this situation
* Check the return value of pbx_exec in app_dial and app_queue before attempting
to actually run the gosub routine. If there was an error, we should not attempt
to run the gosub.
* Change a '|' to a ',' in app_queue.
* Add some extra curly braces where they had been missing previously.
(closes issue #13548)
Reported by: fiddur
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160626 65c4cc65-6c06-0410-ace0-fbb531ad65f3
handling in app_queue was just completely wrong, mostly
because the channel operations being performed were being
done on the incorrect channel.
With this set of changes, a gosub will correctly run on
the answering queue member's channel. There are still crash
issues which occur if there are dialplan syntax errors, so
I cannot yet close the referenced issue.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160555 65c4cc65-6c06-0410-ace0-fbb531ad65f3
it would be best to maintain API compatibility. Instead, this commit introduces
ao2_callback_data() which is functionally identical to ao2_callback() except
that it allows you to pass arbitrary data to the callback.
Reviewed by Mark Michelson via ReviewBoard:
http://reviewboard.digium.com/r/64
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@158959 65c4cc65-6c06-0410-ace0-fbb531ad65f3
hashing used by app_queue.c to be case-insensitive.
This is accomplished by adding a new case-insensitive
hashing function.
This was necessary to prevent bad refcount errors
(and potential crashes) which would occur due to the
fact that queues were initially read from the config
file in a case-sensitive manner. Then, when a user
issued a CLI command or manager action, we allowed
for case-insensitive input and used that input to
directly try to find the queue in the hash table. The result
was either that we could not find a queue that was input or
worse, we would end up hashing to a completely bogus value
based on the input.
This commit resolves the problem presented in
issue #13703. However, that issue was reported against
1.6.0. Since this fix introduces a behavior change, I am
electing to not place this same fix in to the 1.6.0 or 1.6.1
branches, and instead will opt for a change which does not
change behavior.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156883 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ao2_callback and ao2_find). Currently, passing OBJ_POINTER to either
of these mandates that the passed 'arg' is a hashable object, making
searching for an ao2 object based on outside criteria difficult.
Reviewed by Russell and Mark M. via ReviewBoard:
http://reviewboard.digium.com/r/36/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@155401 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit introduces the first phase of an effort to manage documentation of the
interfaces in Asterisk in an XML format. Currently, a new format is available for
applications and dialplan functions. A good number of conversions to the new format
are also included.
For more information, see the following message to asterisk-dev:
http://lists.digium.com/pipermail/asterisk-dev/2008-October/034968.html
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r152538 | murf | 2008-10-28 23:19:04 -0600 (Tue, 28 Oct 2008) | 14 lines
A little documentation cross-ref between features and
dial and queue... I wasted some time (stupidly) trying
to get the one-touch parking stuff working, because it
didn't occur to me that I had to also have the corresponding
options in the dial command! Duh! (In all this time, I never
set this up before!)
So, to keep some poor fool from suffering the same fate,
I made the features.conf.sample file mention the corresponding
opts in dial/queue; and the docs for dial/app specifically
mention the corresponding decls in the feature.conf file.
I hope this doesn't spoil some vast, eternal plan...
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@152605 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r152535 | murf | 2008-10-28 22:36:32 -0600 (Tue, 28 Oct 2008) | 46 lines
The magic trick to avoid this crash is not to
try to find the channel by name in the list,
which is slow and resource consuming, but rather
to pay attention to the result codes from the
ast_bridge_call, to which I added the
AST_PBX_NO_HANGUP_PEER_PARKED value, which
now are returned when a channel is parked.
Why? because CDR's aren't generated via parking,
so nothing is needed, but if a transfer occurred,
there are critical things I need.
If you get AST_PBX_KEEPALIVE,
then don't touch the channel pointer.
If you get AST_PBX_NO_HANGUP_PEER, or
AST_PBX_NO_HANGUP_PEER_PARKED, then don't
touch the peer pointer.
Updated the several places where the results
from a bridge were not being properly obeyed,
and fixed some code I had introduced so that
the results of the bridge were not overridden
(in trunk).
All the places that previously tested for
AST_PBX_NO_HANGUP_PEER now have to check for
both AST_PBX_NO_HANGUP_PEER and AST_PBX_NO_HANGUP_PEER_PARKED.
I tested this against the 4 common parking
scenarios:
1. A calls B; B answers; A parks B; B hangs up while A is getting the parking
slot announcement, immediately after being put on hold.
2. A calls B; B answers; A parks B; B hangs up after A has been hung up, but
before the park times out.
3. A calls B; B answers; B parks A; A hangs up while B is getting the parking slot announcement, immediately after being put on hold.
4. A calls B; B answers; B parks A; A hangs up after B has been hung up, but before the park times out.
No crash.
I also ran the scenarios above against valgrind, and accesses looked good.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@152536 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r149200 | mmichelson | 2008-10-14 17:40:42 -0500 (Tue, 14 Oct 2008) | 12 lines
Update the queue with the correct number of calls and
whether the call was completed within the service level
when a transfer takes place. This way, we do not "break"
the leastrecent and fewestcalls strategies by not logging
a call until after the transferred call has ended.
(closes issue #13395)
Reported by: Marquis
Patches:
app_queue.c.transfer.patch uploaded by Marquis (license 32)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@149201 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and "leavewhenempty" options are configured in queues.conf.
Instead of using vague terms like "yes," "no," "loose," and
"strict," we now accept a comma-separated list of values
to determine when to consider a member available.
Extended details can be found in the queues.conf.sample
file. Note also that the above four referenced values are
still accepted for backwards-compatibility, but are mapped
internally to the new method of representing the option.
AST-105
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@146640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This work is done by lmadsen, junky and mvanbaak
during AstriDevCon.
This is the second audit the CLI got, and
this time lmadsen made sure he had _ALL_ modules
loaded that have CLI commands in them.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@145121 65c4cc65-6c06-0410-ace0-fbb531ad65f3
when a file is invalid from when a file is missing. This is most important when
we have two configuration files. Consider the following example:
Old system:
sip.conf users.conf Old result New result
======== ========== ========== ==========
Missing Missing SIP doesn't load SIP doesn't load
Missing OK SIP doesn't load SIP doesn't load
Missing Invalid SIP doesn't load SIP doesn't load
OK Missing SIP loads SIP loads
OK OK SIP loads SIP loads
OK Invalid SIP loads incompletely SIP doesn't load
Invalid Missing SIP doesn't load SIP doesn't load
Invalid OK SIP doesn't load SIP doesn't load
Invalid Invalid SIP doesn't load SIP doesn't load
So in the case when users.conf doesn't load because there's a typo that
disrupts the syntax, we may only partially load users, instead of failing with
an error, which may cause some calls not to get processed. Worse yet, the old
system would do this with no indication that anything was even wrong.
(closes issue #10690)
Reported by: dtyoo
Patches:
20080716__bug10690.diff.txt uploaded by Corydon76 (license 14)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142992 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r142675 | murf | 2008-09-11 22:29:34 -0600 (Thu, 11 Sep 2008) | 29 lines
Tested by: sergee, murf, chris-mac, andrew, KNK
This is a "second attempt" to restore the previous "endbeforeh" behavior
in 1.4 and up. In order to capture information concerning all the
legs of transfers in all their infinite combinations, I was forced
to this particular solution by a chain of logical necessities, the
first being that I was not allowed to rewrite the CDR mechanism from
the ground up!
This change basically leaves the original machinery alone, which allows
IVR and local channel type situations to generate CDR's as normal, but
a channel flag can be set to suppress the normal running of the h exten.
That flag would be set by the code that runs the h exten from the
ast_bridge_call routine, to prevent the h exten from being run twice.
Also, a flag in the ast_bridge_config struct passed into ast_bridge_call
can be used to suppress the running of the h exten in that routine. This
would happen, for instance, if you use the 'g' option in the Dial app.
Running this routine 'early' allows not only the CDR() func to be used
in the h extension for reading CDR variables, but also allows them to
be modified before the CDR is posted to the backends.
While I dearly hope that this patch overcomes all problems, and
introduces no new problems, reality suggests that surely someone
will have problems. In this case, please re-open 13251 (or 13289),
and we'll see if we can't fix any remaining issues.
** trunk note: some code to suppress the h exten being run
from app_queue was added; for the 'continue' option available
only in trunk/1.6.x.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
issue 12979. The difference between this and the
1.6.0 and 1.6.1 versions is that this is a much more
invasive change. With this, we completely get rid
of the interfaces list, along with all its helper
functions.
Let me take a moment to say that this change personally
excites me since it may mean huge steps forward regarding
proper lock order in app_queue without having to strew
seemingly unnecessary locks all over the place. It also
results in a huge reduction in lines of code and complexity.
Way to go Brett!
(closes issue #12979)
Reported by: sigxcpu
Patches:
20080710_issue12979_queue_custom_state_interface_trunk_2.diff uploaded by bbryant (license 36)
Tested by: sigxcpu, putnopvut
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142146 65c4cc65-6c06-0410-ace0-fbb531ad65f3
messages weren't showing up when I had set the debug level
high for just app_queue.c. It's because we were only checking
the global option_debug variable instead of using the awesome
macro which checks both the global and file-specific value
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@141998 65c4cc65-6c06-0410-ace0-fbb531ad65f3
status is if the queue has a joinempty or a leavewhenempty
setting which could cause the caller to not join the queue
or exit the queue. Prior to this patch, we could potentially
traverse the entire queue's member list for no reason since
even if the members are currently not available in some way
we're going to let the caller join the queue anyway.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@141906 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140488 | mmichelson | 2008-08-29 12:34:17 -0500 (Fri, 29 Aug 2008) | 22 lines
After working on the ao2_containers branch, I noticed
something a bit strange. In all cases where we provide
a callback function to ao2_container_alloc, the callback
function would only return 0 or CMP_MATCH. After inspecting
the ao2_callback() code carefully, I found that if you're
only looking for one specific item, then you should return
CMP_MATCH | CMP_STOP. Otherwise, astobj2 will continue
traversing the current bucket until the end searching for
more matches.
In cases like chan_iax2 where in 1.4, all the peers are
shoved into a single bucket, this makes for potentially
terrible performance since the entire bucket will be
traversed even if the peer is one of the first ones come
across in the bucket.
All the changes I have made were for cases where the
callback function defined was passed to ao2_container_alloc
so that calls to ao2_find could find a unique instance
of whatever object was being stored in the container.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140489 65c4cc65-6c06-0410-ace0-fbb531ad65f3
event if eventwhencalled is set to "vars" in
queues.conf. Yay for consistency.
(closes issue #13369)
Reported by: srt
Patches:
13369_agentringnoanswer_variables.diff uploaded by srt (license 378)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@139832 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r138685 | mmichelson | 2008-08-18 15:01:14 -0500 (Mon, 18 Aug 2008) | 10 lines
Change the inequalities used in app_queue with regards
to timeouts from being strict to non-strict for more
accuracy.
(closes issue #13239)
Reported by: atis
Patches:
app_queue_timeouts_v2.patch uploaded by atis (license 242)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@138687 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r134758 | mmichelson | 2008-07-31 10:56:18 -0500 (Thu, 31 Jul 2008) | 16 lines
Add more timeout checks into app_queue, specifically
targeting areas where an unknown and potentially
long time has just elapsed. Also added a check
to try_calling() to return early if the timeout
has elapsed instead of potentially setting a negative
timeout for the call (thus making it have *no* timeout
at all).
(closes issue #13186)
Reported by: miquel_cabrespina
Patches:
13186.diff uploaded by putnopvut (license 60)
Tested by: miquel_cabrespina
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@134759 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r131369 | mmichelson | 2008-07-16 15:23:02 -0500 (Wed, 16 Jul 2008) | 14 lines
Move the init_queue call back to where it used to be (changed
Sept 12 last year). It was moved then to prevent a memory leak.
Since then, the same memory leak recurred and was fixed in a
better way.
Now it has been found that the placement of this init_queue
call can cause problems if a realtime queue has values changed
to an empty string. The problem is that the default value
for that queue parameter would not be set.
(closes issue #13084)
Reported by: elbriga
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@131375 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r131299 | mmichelson | 2008-07-16 13:57:34 -0500 (Wed, 16 Jul 2008) | 13 lines
Make absolutely certain that the transfer datastore
is removed from the calling channel once the caller
is finished in the queue. This could have weird con-
sequences when dialing local queue members when multiple
transfers occur on a single call.
Also fixed a memory leak that would occur when an
attended transfer occurred from a queue member.
(closes issue #13047)
Reported by: festr
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@131300 65c4cc65-6c06-0410-ace0-fbb531ad65f3
MixMonitor to mix audio. However, it was pointed out to me that because
of this, the command set for the MONITOR_EXEC variable is ignored as well.
This means that people can't do their own custom mixing commands at the end
of recordings in order to make, for instance, stereo recordings of calls.
With this patch, app_queue will set the "joinfiles" variable for the channel's
monitor if MONITOR_EXEC is not zero-length. This means that for normal audio
mixing, MixMonitor is still the preferred choice, but we allow custom
mixing to be done with the two Monitor streams if desired.
(closes issue #12923)
Reported by: snyfer
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@125649 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r125585 | mmichelson | 2008-06-26 17:52:39 -0500 (Thu, 26 Jun 2008) | 11 lines
Add the interface of a queue member to the output of the "queue show" command
so that it can easily be associated with a queue member's name. This helps
so that the appropriate queue member can be removed or paused since the
interface is required, not the member's name.
(closes issue #12783)
Reported by: davevg
Patches:
app_queue.diff uploaded by davevg (license 209) with small mod from me
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@125586 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r125476 | mmichelson | 2008-06-26 15:56:01 -0500 (Thu, 26 Jun 2008) | 11 lines
Prior to this patch, the "queue show" command used cached
information for realtime queues instead of giving up-to-date
info. Now realtime is queried for the latest and greatest in
queue info.
(closes issue #12858)
Reported by: bcnit
Patches:
queue_show.patch uploaded by putnopvut (license 60)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@125477 65c4cc65-6c06-0410-ace0-fbb531ad65f3
They want (char *)NULL as sentinel.
An example is OpenBSD (confirmed on 4.3) that ships with gcc 3.3.4
This commit introduces a contstant SENTINEL which is declared as:
#define SENTINEL ((char *)NULL)
All places I could test compile on my openbsd system are converted.
Update CODING-GUIDELINES to tell about this constant.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@124127 65c4cc65-6c06-0410-ace0-fbb531ad65f3
removed. No telling when it happened. Anyway, it's back in now
and works properly.
(Based on issue reported on mailing list)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@123652 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r123274 | mmichelson | 2008-06-17 10:56:55 -0500 (Tue, 17 Jun 2008) | 12 lines
davidw pointed out that the holdtime calculation used by
app_queue does not use "boxcar" filtering as the comments
say. The term "boxcar" means that the number of samples used
to calculate stays constant, with new samples replacing the
oldest ones. The queue holdtime calculation uses all holdtime
samples collected since the queue was loaded, so the comment
has been changed to be accurate.
(closes issue #12781)
Reported by: davidw
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@123275 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: ys
Many thanks to ys for doing the research on this problem.
I didn't think it would be best to unlock the contexts
and then relock them after the remove_extension2() call,
so I added an extra arg to remove_extension2() and set it
appropriately in each call. There were not that many.
I considered forcing the code to lock the contexts before
the call to remove_extension2(), but that would require
a slightly greater degree of changes, especially since
the find_context_locked is local to pbx.c
I did a simple sanity test to make sure the code doesn't
mess things up in general.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@123165 65c4cc65-6c06-0410-ace0-fbb531ad65f3
long-term use. Instead use the heap. I can't believe this
never happened *once* in my developer branch when I was testing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@122461 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Mark Michelson
Russell Bryant
Olle Johansson
Steve Murphy
Joshua Colp
Tilghman Lesher
Terry Wilson
Eliel C. Sardanons
Sean Bright
Matthew Nicholson
Kevin P. Fleming
BJ Weschke
Michiel van Baak
Brett Bryant
Jeff Peeler