https://origsvn.digium.com/svn/asterisk/branches/10
................
r340165 | mjordan | 2011-10-10 15:30:18 -0500 (Mon, 10 Oct 2011) | 20 lines
Merged revisions 340164 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r340164 | mjordan | 2011-10-10 15:23:48 -0500 (Mon, 10 Oct 2011) | 13 lines
Updated chan_sip to place calls on hold if SDP address in INVITE is ANY
This patch fixes the case where an INVITE is received with c=0.0.0.0 or ::.
In this case, the call should be placed on hold. Previously, we checked for
the address being null; this patch keeps that behavior but also checks for
the ANY IP addresses.
Review: https://reviewboard.asterisk.org/r/1504/
(closes issue ASTERISK-18086)
Reported by: James Bottomley
Tested by: Matt Jordan
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340166 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added some data to skinny packet structures to make compatible
with v17. Added protocolversion to device, set on registration
based on the version provided by device.
v17 includes some increased ip space for ip6. This patch increases
ip space in the packets but still only uses ip4. Some packet
structures duplicated (ip4 and ip6 types). ip4 type used unless
version is greater or equal to 17.
Tested by snuff and myself on 7961 with recent 8.5 firmware. Also
tested compatible with old 7960 and older 30VIPs.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340071 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Increase SKINNY_MAX_PACKET to 2000 bytes to handle some messages
in v17 that are greater than the old 1000 bytes. Also add some
useful logging regarding packet and session handling.
A device (with protocol v17) was sending a packet with length
greater than 1000 which resulted in the TCP session being
destroyed and registration being retryed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340070 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r340031 | wedhorn | 2011-10-10 09:18:27 +1100 (Mon, 10 Oct 2011) | 8 lines
Return -1 to skinny_session if register rejected.
If device registration is rejected, return -1 so that the session is
destroyed immediately. Previously, a segfault would occur on a
graceful shutdown if a register is rejected and the skinny_session
has not yet timed out.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340032 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r339992 | wedhorn | 2011-10-10 08:09:12 +1100 (Mon, 10 Oct 2011) | 9 lines
Remove log message on traverse session list.
On destroying a session, a list of sessions is traversed to find the
matching session. For each session not matching, skinny erroneously
logged that the session was not matched. While technically correct
the message was misleading, and tended to indicate errors that
were not there.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339993 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There was an issue that the cap and confcap pointers for each line and device
were being memcpy'd so they all pointed to the same ast_format_cap. On
destroying, a segfault occured on the second call to the same struct.
skinny reload now works again as well.
Tested by snuff and myself.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339680 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r339626 | rmudgett | 2011-10-06 12:53:00 -0500 (Thu, 06 Oct 2011) | 25 lines
Merged revisions 339625 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r339625 | rmudgett | 2011-10-06 12:49:38 -0500 (Thu, 06 Oct 2011) | 18 lines
Fix debugging messages generated by 'udptl debug'.
* Makes chan_sip set the tag to the channel name.
* Fixes received debug message sequence number.
* Removed tx/rx debug message type since it was hard coded to 0.
* Made udptl.c logged message header consistent if possible: "UDPTL (%s): ".
* Removed unused rx_expected_seq_no from struct ast_udptl.
(closes issue ASTERISK-18401)
Reported by: Kevin P. Fleming
Patches:
jira_asterisk_18401_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Matthew Nicholson
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r339088 | twilson | 2011-10-03 11:44:27 -0700 (Mon, 03 Oct 2011) | 17 lines
Merged revisions 339086 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r339086 | twilson | 2011-10-03 11:40:52 -0700 (Mon, 03 Oct 2011) | 10 lines
Properly ignore AST_CONTROL_UPDATE_RTP_PEER in more places
After the change in r336294, the new AST_CONTROL_UPDATE_RTP_PEER frame
is sent when a re-invite happens. If we receive a re-invite from a device
the waitstream_core was not aware of the new control frame and would drop
the call.
(closes issue ASTERISK-18610)
Reported by: Kristijan_Vrban
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339090 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r338801 | rmudgett | 2011-09-30 17:06:48 -0500 (Fri, 30 Sep 2011) | 19 lines
Merged revisions 338800 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r338800 | rmudgett | 2011-09-30 17:05:10 -0500 (Fri, 30 Sep 2011) | 12 lines
Fix segfault in analog_ss_thread() not checking ast_read() for NULL.
NOTE: The problem was reported against v1.6.2. It is unlikely to ever
happen on v1.8 and above since chan_dahdi.c:analog_ss_thread() is unlikely
to be used. The version in sig_analog.c has largely replaced it.
(closes issue ASTERISK-18648)
Reported by: Stephan Bosch
Patches:
jira_asterisk_18648_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Stephan Bosch
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@338802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r338323 | rmudgett | 2011-09-28 17:36:57 -0500 (Wed, 28 Sep 2011) | 12 lines
Merged revisions 338322 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r338322 | rmudgett | 2011-09-28 17:35:52 -0500 (Wed, 28 Sep 2011) | 5 lines
Make duplicate call ptr warning message more helpful.
* Adds the value of the call ptr to the duplicate call ptr message to help
trace why there is a duplicate call ptr.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@338324 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r337721 | rmudgett | 2011-09-22 16:37:41 -0500 (Thu, 22 Sep 2011) | 25 lines
Merged revisions 337720 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r337720 | rmudgett | 2011-09-22 16:29:46 -0500 (Thu, 22 Sep 2011) | 18 lines
Made ISDN not add numbering plan prefix strings to empty numbers.
When the Caller-ID is restricted, the expected behavior is for the
Caller-ID to be blank. In chan_dahdi, the national prefix is placed onto
the Caller-ID number even if it is restricted (empty) causing the
Caller-ID to be the national prefix rather than blank.
This behavior was lost when sig_pri was extracted from chan_dahdi.
* Made not add prefix strings to empty connected line, calling, and ANI
number strings.
(closes issue ASTERISK-18577)
Reported by: Kris Shaw
Patches:
jira_asterisk_18577_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Kris Shaw
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r337595 | jrose | 2011-09-22 10:35:50 -0500 (Thu, 22 Sep 2011) | 12 lines
Generate Security events in chan_sip using new Security Events Framework
Security Events Framework was added in 1.8 and support was added for AMI to generate
events at that time. This patch adds support for chan_sip to generate security events.
(closes issue ASTERISK-18264)
Reported by: Michael L. Young
Patches:
security_events_chan_sip_v4.patch (license #5026) by Michael L. Young
Review: https://reviewboard.asterisk.org/r/1362/
........
r337597 | jrose | 2011-09-22 10:47:05 -0500 (Thu, 22 Sep 2011) | 10 lines
Forgot to svn add new files to r337595
Part of Generating security events for chan_sip
(issue ASTERISK-18264)
Reported by: Michael L. Young
Patches:
security_events_chan_sip_v4.patch (License #5026) by Michael L. Young
Reviewboard: https://reviewboard.asterisk.org/r/1362/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337600 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r337487 | irroot | 2011-09-22 11:26:26 +0200 (Thu, 22 Sep 2011) | 16 lines
Merged revisions 337486 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r337486 | irroot | 2011-09-22 11:22:26 +0200 (Thu, 22 Sep 2011) | 10 lines
If IP address is used in chan_h323 host parameter of peer configuration.
module tries to resolve IP address to IP address and fails.
Simple fix to set family of socket this is a hangover from ipv6 changes.
(closes issue ASTERISK-18237)
(issue ASTERISK-17278)
(issue ASTERISK-17500)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r337008 | rmudgett | 2011-09-20 14:12:24 -0500 (Tue, 20 Sep 2011) | 22 lines
Merged revisions 337007 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r337007 | rmudgett | 2011-09-20 14:10:30 -0500 (Tue, 20 Sep 2011) | 15 lines
Check if a channel was created before using the pointer in sig_ss7_new_ast_channel().
Fixes the crash in ASTERISK-17955 gdb-11918.txt backtrace.
* Added some missing libss7 access lock protection.
* Prevent cancelling the ss7_linkset() thread at inoportune times just
like the pri_dchannel() thread.
(issue ASTERISK-17955)
Reported by: Ian M Sherman
Patches:
jira_asterisk_17955_v1.8.patch (license #5621) patch uploaded by rmudgett
(attached to related ASTERISK-17966)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337009 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r336978 | rmudgett | 2011-09-20 13:14:40 -0500 (Tue, 20 Sep 2011) | 28 lines
Merged revisions 336977 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r336977 | rmudgett | 2011-09-20 13:12:17 -0500 (Tue, 20 Sep 2011) | 21 lines
Fix deadlock from not releasing SS7 linkset lock.
sig_ss7_hangup() failed to release the SS7 linkset lock if the call had
the alreadyhungup flag set.
* Made unlock the SS7 linkset lock in sig_ss7_hangup() if the
alreadyhungup flag is set.
* Made ss7_start_call() not hold any locks while creating the channel for
an incoming call to prevent deadlock.
* Made ss7_grab() a void function, since it could never fail, to simplify
calling code.
* Made obtain the channel lock to do softhangup in some places.
Patches:
jira_ast_668_v1.8.patch (license #5621) patch uploaded by rmudgett
JIRA AST-668
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@336988 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r336936 | irroot | 2011-09-20 18:51:59 +0200 (Tue, 20 Sep 2011) | 14 lines
Allow Setting Auth Tag Bit length Based on invite or config option
Update the SIP SRTP API to allow use of 32 or 80 bit taglen.
Curently only 80 bit is supported.
The outgoing invite will use the taglen of the incoming invite preventing
one-way audio.
(Closes issue ASTERISK-17895)
Review: https://reviewboard.asterisk.org/r/1173/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@336937 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r336500 | irroot | 2011-09-19 15:31:50 +0200 (Mon, 19 Sep 2011) | 19 lines
Merged revisions 336499 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r336499 | irroot | 2011-09-19 15:27:52 +0200 (Mon, 19 Sep 2011) | 13 lines
A long time ago in a galaxy far far away a IPv6 update was made,
chan_h323 was not updated causeing all to flee to chan_ooh323.
the brave Jedi [asterisk developers] pondered this miscarrige of justice
and restored order to the force for the sake of closing out 2 old issues.
(closes issue ASTERISK-17278)
(closes issue ASTERISK-17500)
Reported by: dread, sybasesql
Tested by: irroot
Reviewed by: IRC (russellb, kpfleming)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@336503 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r336307 | jrose | 2011-09-16 16:09:20 -0500 (Fri, 16 Sep 2011) | 20 lines
Merged revisions 336294 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r336294 | jrose | 2011-09-16 14:53:40 -0500 (Fri, 16 Sep 2011) | 13 lines
Fix bad RTP media bridges in directmedia calls on peers separated by multiple Asterisk nodes.
In a situation involving devices on separate Asterisk trunks, the remote RTP bridge would
break when starting a call with directmedia. This patch queues a new type of control frame
so that our RTP bridge loop can properly detect when these situations occur and check to see
if peers need to be updated in order to send their media to the proper location.
(Closes issue ASTERISK-18340)
Reported by: Thomas Arimont
(Closes issue ASTERISK-17725)
Reported by: kwk
Tested by: twilson, jrose
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@336311 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r336167 | irroot | 2011-09-16 12:12:03 +0200 (Fri, 16 Sep 2011) | 22 lines
Merged revisions 336166 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r336166 | irroot | 2011-09-16 12:09:17 +0200 (Fri, 16 Sep 2011) | 16 lines
The round robin routing routine in chan_misdn.c is broken.
it rotates between ports but never checks the channels in the ports.
i have extensivly tested it and verified it works on 1 upto 4 ports.
before the patch only 1 out of each port was used now all are used as
expected.
(closes issue ASTERISK-18413)
Reported by: irroot
Tested by: irroot
Reviewed by: irroot
Review: https://reviewboard.asterisk.org/r/1410/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@336168 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r335323 | oej | 2011-09-12 15:47:13 +0200 (Mån, 12 Sep 2011) | 19 lines
Merged revisions 335319 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r335319 | oej | 2011-09-12 15:25:30 +0200 (Mån, 12 Sep 2011) | 12 lines
Lock the peer->mvipvt to avoid crashes with SIP history enabled
After the launch of 1.6 event-based MWI we have two threads handling the peer->mwipvt,
which cause issues with SIP history additions in combination with the max limit for
number of history entries.
Review: https://reviewboard.asterisk.org/r/1373/
(closes issue ASTERISK-18288)
Thanks to irrot for peer review. Work with this bug funded by IPvision AS
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@335324 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r335321 | kmoore | 2011-09-12 08:27:04 -0500 (Mon, 12 Sep 2011) | 16 lines
Merged revisions 335320 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r335320 | kmoore | 2011-09-12 08:25:42 -0500 (Mon, 12 Sep 2011) | 9 lines
Prevent IAX2 from getting IPv6 addresses via DNS
IAX2 does not support IPv6 and getting such addresses from DNS can cause error
messages on the remote end involving bad IPv4 address casts in the presence of
IPv6/IPv4 tunnels. This patch ensures that IAX2 will not encounter IPv6
addresses via DNS queries.
(closes issue ASTERISK-18090)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@335322 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r335078 | mjordan | 2011-09-09 11:27:01 -0500 (Fri, 09 Sep 2011) | 29 lines
Merged revisions 335064 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r335064 | mjordan | 2011-09-09 11:09:09 -0500 (Fri, 09 Sep 2011) | 23 lines
Updated SIP 484 handling; added Incomplete control frame
When a SIP phone uses the dial application and receives a 484 Address
Incomplete response, if overlapped dialing is enabled for SIP, then
the 484 Address Incomplete is forwarded back to the SIP phone and the
HANGUPCAUSE channel variable is set to 28. Previously, the Incomplete
application dialplan logic was automatically triggered; now, explicit
dialplan usage of the application is required.
Additionally, this patch adds a new AST_CONTOL_FRAME type called
AST_CONTROL_INCOMPLETE. If a channel driver receives this control frame,
it is an indication that the dialplan expects more digits back from the
device. If the device supports overlap dialing it should attempt to
notify the device that the dialplan is waiting for more digits; otherwise,
it can handle the frame in a manner appropriate to the channel driver.
(closes issue ASTERISK-17288)
Reported by: Mikael Carlsson
Tested by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/1416/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@335079 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Make check_rtp_timeout() remember the values returned by
ast_rtp_instance_get_timeout(), ast_rtp_instance_get_hold_timeout(), and
ast_rtp_instance_get_keepalive() instead of repeatedly calling them.
(closes issue ASTERISK-18319)
Reported by: Rob Gagnon
Patches:
issue-18319-trunk-r333066.diff (License #6159) patch uploaded by Rob Gagnon
Review: https://reviewboard.asterisk.org/r/1377/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@334115 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r334013 | rmudgett | 2011-08-31 11:00:49 -0500 (Wed, 31 Aug 2011) | 30 lines
Merged revisions 334012 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r334012 | rmudgett | 2011-08-31 10:57:12 -0500 (Wed, 31 Aug 2011) | 23 lines
No DAHDI channel available for conference, user introduction disabled.
The following error will consistently occur when trying to dial into a
MeetMe conference when the server does not have DAHDI hardware installed:
app_meetme.c: No DAHDI channel available for conference, user introduction
disabled (is chan_dahdi loaded?)
While chan_dahdi is loaded correctly during compilation and install of
Asterisk/Dahdi, including associated modules, etc., a chan_dahdi.conf
configuration file in /etc/asterisk is not created by FreePBX if hardware
does not exist, causing MeetMe to be unable to open a DAHDI pseudo
channel.
* Allow chan_dahdi to create a pseudo channel when there is no
chan_dahdi.conf file to load.
(closes issue ASTERISK-17398)
Reported by: Preston Edwards
Patches:
jira_asterisk_17398_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: rmudgett
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@334014 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r334010 | rmudgett | 2011-08-31 10:23:11 -0500 (Wed, 31 Aug 2011) | 50 lines
Merged revisions 334009 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r334009 | rmudgett | 2011-08-31 10:20:31 -0500 (Wed, 31 Aug 2011) | 43 lines
Call pickup race leaves orphaned channels or crashes.
Multiple users attempting to pickup a call that has been forked to
multiple extensions either crashes or fails a masquerade with a "bad
things may happen" message.
This is the scenario that is causing all the grief:
1) Pickup target is selected
2) target is marked as being picked up in ast_do_pickup()
3) target is unlocked by ast_do_pickup()
4) app dial or queue gets a chance to hang up losing calls and calls
ast_hangup() on target
5) SINCE A MASQUERADE HAS NOT BEEN SETUP YET BY ast_do_pickup() with
ast_channel_masquerade(), ast_hangup() completes successfully and the
channel is no longer in the channels container.
6) ast_do_pickup() then calls ast_channel_masquerade() to schedule the
masquerade on the dead channel.
7) ast_do_pickup() then calls ast_do_masquerade() on the dead channel
8) bad things happen while doing the masquerade and in the process
ast_do_masquerade() puts the dead channel back into the channels container
9) The "orphaned" channel is visible in the channels list if a crash does
not happen.
This patch does the following:
* Made ast_hangup() set AST_FLAG_ZOMBIE on a successfully hung-up channel
and not release the channel lock until that has happened.
* Made __ast_channel_masquerade() not setup a masquerade if either channel
has AST_FLAG_ZOMBIE set.
* Fix chan_agent misuse of AST_FLAG_ZOMBIE since it would no longer work.
(closes issue ASTERISK-18222)
Reported by: Alec Davis
Tested by: rmudgett, Alec Davis, irroot, Karsten Wemheuer
(closes issue ASTERISK-18273)
Reported by: Karsten Wemheuer
Tested by: rmudgett, Alec Davis, irroot, Karsten Wemheuer
Review: https://reviewboard.asterisk.org/r/1400/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@334011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r334007 | kmoore | 2011-08-31 10:19:30 -0500 (Wed, 31 Aug 2011) | 14 lines
Merged revisions 334006 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r334006 | kmoore | 2011-08-31 10:18:37 -0500 (Wed, 31 Aug 2011) | 7 lines
Correct an AMI protocol violation with SIPshowpeer
The response of SIPshowpeer ends with "\r\n\r\n". Since other commands are
ended by using \r\n this confuses any interfacing script.
(closes issue ASTERISK-17486)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@334008 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r333837 | twilson | 2011-08-29 16:41:13 -0500 (Mon, 29 Aug 2011) | 22 lines
Merged revisions 333836 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r333836 | twilson | 2011-08-29 16:38:31 -0500 (Mon, 29 Aug 2011) | 15 lines
Refresh peer address if DNS unavailable at peer creation
If Asterisk starts and no DNS is available, outbound registrations will fail
indefinitely. This patch copies the address from the sip_registry struct, which
will be updated, to the peer->addr when necessary.
If dnsmgr is enabled, the registration fails without the patch because even
though the address on the registry is updated via dnsmgr, the address is just
copied on the first try. Since we use ast_sockaddr_copy, dnsmgr can't update
the address that is copied to the sip_pvt or peers.
Closes issue ASTERISK-18000
Review: https://reviewboard.asterisk.org/r/1335/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@333838 65c4cc65-6c06-0410-ace0-fbb531ad65f3
GCC 4.6 detects variables that get assined to, but never used later.
Also removes some remmed-out lines that become invalid.
(closes issue ASTERISK-18336)
Signed-off-by: Tzafrir Cohen (License #5035) <tzafrir.cohen@xorcom.com>,
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@333509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r332504 | kmoore | 2011-08-18 14:29:15 -0500 (Thu, 18 Aug 2011) | 15 lines
Merged revisions 332503 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332503 | kmoore | 2011-08-18 14:28:00 -0500 (Thu, 18 Aug 2011) | 8 lines
CRC4 in "dahdi show status" gives wrong impression to T1 users
Change CRC4 to CRC in the output of "dahdi show status" so that it can apply in
more situations without confusing users, especially since T1 lines use CRC6
instead of CRC4.
(closes issue AST-471)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332505 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r332265 | rmudgett | 2011-08-17 11:01:29 -0500 (Wed, 17 Aug 2011) | 33 lines
Merged revisions 332264 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332264 | rmudgett | 2011-08-17 10:51:08 -0500 (Wed, 17 Aug 2011) | 26 lines
Outgoing BRI calls fail when using Asterisk 1.8 with HA8, HB8, and B410P cards.
France Telecom brings layer 2 and layer 1 down on BRI lines when the line
is idle. When layer 1 goes down Asterisk cannot make outgoing calls and
the HA8 and HB8 cards also get IRQ misses.
The inability to make outgoing calls is because the line is in red alarm
and Asterisk will not make calls over a line it considers unavailable.
The IRQ misses for the HA8 and HB8 card are because the hardware is
switching clock sources from the line which just brought layer 1 down to
internal timing.
There is a DAHDI option for the B410P card to not tell Asterisk that layer
1 went down so Asterisk will allow outgoing calls: "modprobe wcb4xxp
teignored=1". There is a similar DAHDI option for the HA8 and HB8 cards:
"modprobe wctdm24xxp bri_teignored=1". Unfortunately that will not clear
up the IRQ misses when the telco brings layer 1 down.
* Add layer 2 persistence option to customize the layer 2 behavior on BRI
PTMP lines. The new option has three settings: 1) Use libpri default
layer 2 setting. 2) Keep layer 2 up. Bring layer 2 back up when the peer
brings it down. 3) Leave layer 2 down when the peer brings it down.
Layer 2 will be brought up as needed for outgoing calls.
JIRA AST-598
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332270 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r332119 | jrose | 2011-08-16 12:45:38 -0500 (Tue, 16 Aug 2011) | 23 lines
Merged revisions 332118 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332118 | jrose | 2011-08-16 12:38:19 -0500 (Tue, 16 Aug 2011) | 16 lines
ASTERISK-18067 ASTERISK-15479 - White Space affects mailbox value, multiple MWI subs
Before, having multiple subscriptions to mailboxes on a sip peer set via the mailbox
setting in sip.conf would only result in updates being sent on whichever mailbox
triggered the mwi event. Now all of them get counted regardless. Also fixes a bug
involving parsing of the mailbox option in sip.conf so that trailing and leading
spaces before/after commas are trimmed.
(closes issue ASTERISK-18067)
Reported by: aragon
(closes issue ASTERISK-15479)
Reported by: Ben Winslow
Patches: chan_sip.c-mwi_multi_mailbox_fix-1.6.2.13.diff (License #5288) patch uploaded by Ben Winslow
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r332022 | mnicholson | 2011-08-16 09:40:37 -0500 (Tue, 16 Aug 2011) | 16 lines
In 10 and trunk this option is disabled by default.
Merged revisions 332021 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332021 | mnicholson | 2011-08-16 09:20:43 -0500 (Tue, 16 Aug 2011) | 7 lines
Added the 'storesipcause' option to sip.conf to allow the user to disable the
setting of HASH(SIP_CAUSE,<chan name>) on the channel.
Having chan_sip set HASH(SIP_CAUSE,<chan name>) on the channel carries a
significant performance penalty because of the usage of the MASTER_CHANNEL()
dialplan function.
AST-580
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332023 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r331956 | rmudgett | 2011-08-15 12:35:03 -0500 (Mon, 15 Aug 2011) | 20 lines
Merged revisions 331955 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r331955 | rmudgett | 2011-08-15 12:24:08 -0500 (Mon, 15 Aug 2011) | 13 lines
Fix some minor chan_dahdi config load issues.
* Address chan_dahdi.conf dahdichan option todo item about needing line
number.
* Make ignore_failed_channels option also apply to dahdichan option.
* Don't attempt to create a default pseudo channel if the chan_dahdi.conf
channel/channels option is not allowed.
* Add a similar check for dahdichan in normal chan_dahdi.conf sections as
is done in users.conf.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331957 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r331772 | rmudgett | 2011-08-12 13:59:45 -0500 (Fri, 12 Aug 2011) | 15 lines
Merged revisions 331771 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r331771 | rmudgett | 2011-08-12 13:58:40 -0500 (Fri, 12 Aug 2011) | 8 lines
Suppress warning message when using DAHDITransfer or DAHDIHangup.
* The fake event should only be processed by the channel that currently
owns the private and not the associated call waiting or 3-way channel.
JIRA AST-620
JIRA SWP-3616
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331773 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r331715 | rmudgett | 2011-08-12 12:54:47 -0500 (Fri, 12 Aug 2011) | 29 lines
Merged revisions 331714 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r331714 | rmudgett | 2011-08-12 12:47:57 -0500 (Fri, 12 Aug 2011) | 22 lines
AMI actions DAHDIHangup and DAHDITransfer have no effect.
The AMI actions DAHDIHangup and DAHDITransfer have no effect on a DAHDI
channel. These two AMI actions are highly specialized to analog channels
and appear to make the channel behave like a jack port for headsets.
* Made the faked DAHDI event get processed before a normal media stream
read in dahdi_read() instead of trying to trigger an exception read by
setting the AST_FLAG_EXCEPTION flag. Apparently a change was made long
ago that changed how AST_FLAG_EXCEPTION is processed in the core.
Unfortunately, the faked DAHDI events no longer worked when that happened.
* Updated the DAHDI AMI action documentation for the following actions:
DAHDITransfer, DAHDIHangup, DAHDIDialOffhook, DAHDIDNDon, DAHDIDNDoff,
DAHDIShowChannels, and DAHDIRestart.
* Made use sscanf() instead of atoi() for better error checking of the
DAHDIChannel header string.
JIRA AST-620
JIRA SWP-3616
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331716 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r331518 | kmoore | 2011-08-10 17:23:49 -0500 (Wed, 10 Aug 2011) | 17 lines
Merged revisions 331517 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r331517 | kmoore | 2011-08-10 17:23:08 -0500 (Wed, 10 Aug 2011) | 10 lines
SIP Notify via AMI or CLI leaks SIP PVTs
Any SIP notify sent via AMI or CLI leaks a SIP PVT with ref count +2. Removing
the additional ref just before the invite and adding an unref following it
corrects the issue as seen via REF_DEBUG. The unref existed in a distant
revision and it appears as though the wrong ref operation was removed.
(closes issue ASTERISK-18091)
Review: https://reviewboard.asterisk.org/r/1332/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to address a compatability issue with certain features on certain devices
which rely on display name content to change behavior, initreqprep in chan_sip.c
has been changed to no longer substitute cid_number into the display name when
cid_name isn't present. Instead, it will send no display name in that case.
(closes issue ASTERISK-16198)
Reported by: Walter Doekes
Review: https://reviewboard.asterisk.org/r/1341/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331371 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r331265 | rmudgett | 2011-08-09 18:12:49 -0500 (Tue, 09 Aug 2011) | 22 lines
Merged revisions 331248 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r331248 | rmudgett | 2011-08-09 17:12:59 -0500 (Tue, 09 Aug 2011) | 15 lines
Misc minor items found in code.
* Add some reentrancy protection in pbx.c when creating the contexts_table
hash table.
* Fix inverted test in chan_sip.c conditional code.
* Fix uninitialized variable and use of the wrong variable in chan_iax2.c.
* Fix test of return value in app_parkandannounce.c. Explicitly testing
for -1 is bad if the function does not actually return that value when it
fails.
* Fixup some comments and add some curly braces in features.c.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@331266 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r330706 | kmoore | 2011-08-03 08:39:06 -0500 (Wed, 03 Aug 2011) | 17 lines
Merged revisions 330705 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r330705 | kmoore | 2011-08-03 08:38:17 -0500 (Wed, 03 Aug 2011) | 10 lines
Call pickup broken for DAHDI channels when beginning with #
The call pickup feature did not work on DAHDI devices for anything other than
feature codes beginning with * since all feature codes in chan_dahdi were
originally hard-coded to begin with *. This patch is also applied to
chan_dahdi.c to fix this bug with radio modes.
(closes issue AST-621)
Review: https://reviewboard.asterisk.org/r/1336/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@330707 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r330586 | dvossel | 2011-08-02 11:17:59 -0500 (Tue, 02 Aug 2011) | 15 lines
Merged revisions 330581 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r330581 | dvossel | 2011-08-02 11:15:08 -0500 (Tue, 02 Aug 2011) | 8 lines
Fixes crash in chan_iax2.
Fixes crash in chan_iax2 resulting from an edge case in the
way control frames are queued during calltoken negotiation is complete.
(closes issue ASTERISK-17610)
Reported by: mgrobecker
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@330593 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There is a fairly common pattern making its way through the code base where we
put a temporary object on the stack so we can call ao2_find() with OBJ_POINTER.
The purpose is so that it can be passed into the object hash function.
However, this really seems like a hack and potentially error prone. This patch
is a first stab at approach to avoid having to do that.
It adds a new flag, OBJ_KEY, which can be used instead of OBJ_POINTER in these
situations. Then, the hash function can know whether it was given an object or
some custom data to hash.
The patch also changes some uses of ao2_find() for iax2_user and iax2_peer
objects to reflect how OBJ_KEY would be used.
So long, and thanks for all the fish.
Review: https://reviewboard.asterisk.org/r/1184/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@330273 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r330051 | rmudgett | 2011-07-28 12:10:37 -0500 (Thu, 28 Jul 2011) | 29 lines
Merged revisions 330050 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r330050 | rmudgett | 2011-07-28 12:04:24 -0500 (Thu, 28 Jul 2011) | 22 lines
Merged revisions 330033 from
https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
..........
r330033 | rmudgett | 2011-07-28 11:26:38 -0500 (Thu, 28 Jul 2011) | 15 lines
Datacalls with B410P fail.
Incoming and outgoing call legs of a data call are using different
formats: a-law, u-law. When the call is bridged, the media stream is run
through translation to convert the media formats. The translation is bad
for data calls.
* Make incoming call that does not explicitly specify u-law or a-law use
the DAHDI channel's default law. The outgoing call always uses the
default law from the DAHDI channel.
(closes issue ABE-2800)
Patches:
jira_abe_2800_companding.patch (license #5621) patch uploaded by rmudgett
..........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@330052 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/2.0
................
r328936 | kmoore | 2011-07-20 14:01:37 -0500 (Wed, 20 Jul 2011) | 15 lines
Merged revisions 328935 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r328935 | kmoore | 2011-07-20 14:00:23 -0500 (Wed, 20 Jul 2011) | 8 lines
Inband DTMF regression
The functionality of inband DTMF in chan_sip relied upon
ast_rtp_instance_dtmf_mode_get/set not working properly to avoid calling
ast_rtp_instance_dtmf_begin/end on RTP streams with inband DTMF. According to
documentation, ast_rtp_instance_dtmf_begin/end is meant only for RFC2833 DTMF,
never inband. This fixes the regression introduced in revision 328823.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@328937 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.10
................
r328824 | kmoore | 2011-07-19 13:05:21 -0500 (Tue, 19 Jul 2011) | 18 lines
Merged revisions 328823 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r328823 | kmoore | 2011-07-19 12:57:18 -0500 (Tue, 19 Jul 2011) | 11 lines
RTP bridge away with inband DTMF and feature detection
When deciding whether Asterisk was allowed to bridge the call away from the
core, chan_sip did not take into account the usage of features on dialed
channels that require monitoring of DTMF on channels utilizing inband DTMF.
This would cause Asterisk to allow the call to be locally or remotely bridged,
preventing access to the data required to detect activations of such features.
(closes 17237)
Review: https://reviewboard.asterisk.org/r/1302/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@328825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.10
................
r328611 | markm | 2011-07-18 08:56:49 -0400 (Mon, 18 Jul 2011) | 15 lines
Merged revisions 328608 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r328608 | markm | 2011-07-18 08:35:57 -0400 (Mon, 18 Jul 2011) | 9 lines
If the sip private structure is null, sip_setoption() will defref the null pointer and crash.
Ideally, sip_setoption shouldn't be called if there is a lack of a sip private structure. But this will fix a crash.
(closes issue ASTERISK-17909)
Reported by: Mark Murawski
Tested by: Mark Murawski
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@328612 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r327211 | rmudgett | 2011-07-08 16:41:58 -0500 (Fri, 08 Jul 2011) | 9 lines
INVITE 403 Forbidden response always retransmits the maximum times.
Asterisk sends a 403 Forbidden response if authentication fails for an
INVITE as required. However, it ignores the ACK and keeps retransmitting
the response.
* Made not delete the to-tag in the dialog so the expected ACK can be
matched with the dialog and stop the retransmissions.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@327212 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds pass-through support for CELT. CELT
formats are defined in codecs.conf and can be configured
to any sample rate a CELT endpoint supports. This patch also
addresses a crash in channel.c resulting from a frame list being
freed incorrectly. This crash was discovered while testing a CELT
translator which had to split encoded audio into multiple frames.
The codec translator is not a part of this patch, but may be
contributed in the future.
Review: https://reviewboard.asterisk.org/r/1294/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326855 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r326411 | tilghman | 2011-07-05 17:08:29 -0500 (Tue, 05 Jul 2011) | 14 lines
Add the attribute "type" to each "<use>" for menuselect.
This matters only when autoconf fails to detect that weak linking is supported.
External optional dependencies will become optional in both cases, as they are
removed at compile time when not detected. However, runtime-optional modules
are made mandatory when weak linking is not found. This change affects only
the external optional dependencies; previously, they were incorrectly required
when weak linking support was not detected.
Patches:
20110702__issue18062__asterisk_trunk.diff.txt by tilghman (License #5003)
Tested by: iasgoscouk
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326412 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r326291 | rmudgett | 2011-07-05 12:22:59 -0500 (Tue, 05 Jul 2011) | 23 lines
Used auth= parameter freed during "sip reload" causes crash.
If you use the auth= parameter and do a "sip reload" while there is an
ongoing call. The peer->auth data points to free'd memory.
The patch does several things:
1) Puts the authentication list into an ao2 object for reference counting
to fix the reported crash during a SIP reload.
2) Converts the authentication list from open coding to AST list macros.
3) Adds display of the global authentication list in "sip show settings".
(closes issue ASTERISK-17939)
Reported by: wdoekes
Patches:
jira_asterisk_17939_v1.8.patch (license #5621) patch uploaded by rmudgett
Review: https://reviewboard.asterisk.org/r/1303/
JIRA SWP-3526
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326321 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r326144 | rmudgett | 2011-07-01 16:07:22 -0500 (Fri, 01 Jul 2011) | 16 lines
Better way to get chan and pvt lock for issue ASTERISK-17431.
Redoes -r308945 for issue ASTERISK-17431 deadlock fix for
sip_set_udptl_peer() and sip_set_rtp_peer().
* Lock the channels in the defined order and avoid the need for a deadlock
avoidance loop.
* Lock the channel before getting the pointer to the private structure to
be sure that the pointer will not change due to a masquerade or channel
hangup.
* To preserve sanity, check that chan and p->owner are the same. (Pointer
rearangements should not happen without the protection of locks because
bad things tend to happen otherwise.)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326145 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r325935 | rmudgett | 2011-06-30 15:39:45 -0500 (Thu, 30 Jun 2011) | 11 lines
Misc minor changes in chan_sip.
* Add load failure exit if primary SIP container(s) could not get created
in chan_sip.c:load_module().
* Removed a redundant static prototype.
* Some typos.
* Some whitespace.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@325936 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r325212 | rmudgett | 2011-06-28 12:30:16 -0500 (Tue, 28 Jun 2011) | 7 lines
Use the device name and not the channel name to initialize the device state.
Correct ASTERISK-11323 implementation as I don't see how it ever worked as
claimed when it used the channel name and not the device name.
(issue ASTERISK-11323)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@325213 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a SDP does not modify the session, we ignore it. However, we were defaulting
no text and video support to true before checking to see if the sdp modified
anything or not. This would result in process_sdp ignoring an sdp but removing
video and text from the call during direct media reinvites.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@325151 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r324914 | rmudgett | 2011-06-27 10:37:19 -0500 (Mon, 27 Jun 2011) | 21 lines
When subscribing MWI to an unsolicited mailbox the first notification is incorrect.
A remote peer subscribed to MWI with the unsolicited option and a local
phone subscribed to the remote mailbox. The notify message-summary events
are sent correctly except for the first one when subscribing, which will
always be 0. This means the phone MWI indicator will be wrong until the
mailbox read/unread count changes and the event is fired.
Looks like this is a regression from ASTERISK-16149.
* Fix the logic to check the cache and if allowed then fallback to
manually counting mailbox messages.
(closes issue ASTERISK-17997)
Reported by: rsw686
Patches:
jira_asterisk_17997_v1.8.patch (license #5621) uploaded by rmudgett
Tested by: rsw686
JIRA SWP-3551
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@324915 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r324484 | twilson | 2011-06-22 13:52:04 -0500 (Wed, 22 Jun 2011) | 20 lines
Stop sending IPv6 link-local scope-ids in SIP messages
The idea behind the patch listed below was used, but in a more targeted manner.
There are now address stringification functions for addresses that are meant to
be sent to a remote party. Link-local scope-ids only make sense on the machine
from which they originate and so are stripped in the new functions.
There is also a host sanitization function added to chan_sip which is used
for when peer and dialog tohost fields or sip_registry hostnames are used to
craft a SIP message.
Also added are some basic unit tests for netsock2 address parsing.
(closes issue ASTERISK-17711)
Reported by: ch_djalel
Patches:
asterisk-1.8.3.2-ipv6_ll_scope.patch uploaded by ch_djalel (license 1251)
Review: https://reviewboard.asterisk.org/r/1278/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@324487 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
Also fixed a reference leak in an error path in sip_msg_send().
........
r324481 | rmudgett | 2011-06-22 13:41:20 -0500 (Wed, 22 Jun 2011) | 19 lines
Timout or error on INFO or MESSAGE transaction causes call to be lost.
When exchanging INFO messages within a call, 4xx error causes the call to
be disconnected although RFC 2976 explicitly states that such transactions
do not modify the state of the dialog.
When exchanging MESSAGE messages within a call, 4xx error causes the call
to be disconnected. To provide least surprise, we should not disconnect
the call since a MESSAGE is like INFO in this case. (Implied by RFC 3428
Section 2)
(closes issue ASTERISK-17901)
Reported by: neutrino88
Review: https://reviewboard.asterisk.org/r/1257/
Review: https://reviewboard.asterisk.org/r/1258/
JIRA SWP-3486
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@324482 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r324237 | twilson | 2011-06-20 12:33:07 -0500 (Mon, 20 Jun 2011) | 12 lines
Ignore media offers with a port of 0
Section 5.1 of RFC3264 states:
A port number of zero in the offer indicates that the stream is offered
but MUST NOT be used.
(closes issue ASTERISK-17845)
Reported by: jacco
Patches:
issue19281_2.patch uploaded by jacco (license 1277)
Tested by: jacco, twilson
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@324238 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r323371 | jrose | 2011-06-14 11:38:43 -0500 (Tue, 14 Jun 2011) | 12 lines
Changes contact use in build_peer to use the FORCE_RPORT flag instead of RPORT_PRESENT
It turned out that this was causing NAT=Yes to always use rport when present which was
against 1.6.2 behavior and the check itself was redundant since the only way this
segment of code could be reached was if RPORT_PRESENT was already evaluated as true
earlier.
(closes issue ASTERISK-17789)
Reported by: byronclark
Patches:
use_sip_nat_force_rport.patch uploaded by byronclark (license 1200)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@323372 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Autoanswer added to skinny based on incoming chan var SKINNY_AUTOANSWER.
Initial value must be the time to autoanswer in ms, then optionally :BEEP
to play a tone when answered and :MUTE to mute the mic when answering.
eg 3000:MUTE:BEEP will ring for 3 secs, then answer, mute the mic, and
play a beep. just 3000 would answer afer 3 secs of ringing with no
beep and full two way audio.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322544 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The do_monitor seemed to be there for task scheduling and network monitoring. However, the network monitoring has a dedicated thread so the ast_io_wait was basically just a usleep as it didn't actually seem to be monitoring anything.
Review: https://reviewboard.asterisk.org/r/1256/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322381 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r322322 | irroot | 2011-06-08 08:18:38 +0200 (Wed, 08 Jun 2011) | 18 lines
Make handle_request_publish do dialog expiration and destruction.
This patch fixes handle_request_publish so that it does dialog expiration and destruction.
Without this patch the incoming PUBLISH requests will get stuck in the dialog list.
Restarting asterisk is the only way to remove them.
Personal observation on one system the server hung up while looping through the channels
rendering asterisk unusable and all sip phones unregisterd when they try reregister
more requests are added.
(closes issue #18898)
Reported by: gareth
Tested by: loloski, Chainsaw, wimpy, se, kuj, irroot
Jira: https://issues.asterisk.org/jira/browse/ASTERISK-17915
Review: https://reviewboard.asterisk.org/r/1253
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322323 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Don't send all messages to 's'. Get the destination from the request URI.
(Found using automated test cases).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321617 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk now has protocol independent support for processing text messages
outside of a call. Messages are routed through the Asterisk dialplan.
SIP MESSAGE and XMPP are currently supported. There are options in sip.conf
and jabber.conf that enable these features.
There is a new application, MessageSend(). There are two new functions,
MESSAGE() and MESSAGE_DATA(). Documentation will be available on
the project wiki, wiki.asterisk.org.
Thanks to Terry Wilson for the assistance with development and to David Vossel
for helping with some additional testing.
Review: https://reviewboard.asterisk.org/r/1042/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321155 | markm | 2011-05-26 17:48:45 -0400 (Thu, 26 May 2011) | 10 lines
Fixed build problem with dev mode enabled, which was caused by commit 321100. Reformulated patch to be more generic.
Moved the sip uri parse variable initalization to parse_uri_full in reqresp_parser.c. This will ensure that any use of parse uri will have null output variables if the parse fails.
(closes issue #19346)
Reported by: kobaz
Tested by: kobaz,JonathanRose
Review: [full review board URL with trailing slash]
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321156 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321100 | markm | 2011-05-26 16:09:35 -0400 (Thu, 26 May 2011) | 11 lines
ast_sockaddr_resolve() in netsock2.c may deref a null pointer
Added a null check in netsock2 ast_sockaddr_resolve() as well as added default initalizers in chan_sip parse_uri_legacy_check() to make sure that invalid uris will make null (and not undefined) user,pass,domain,transport variables
(closes issue #19346)
Reported by: kobaz
Patches:
netsock2.patch uploaded by kobaz (license 834)
Tested by: kobaz, Marquis
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321101 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r320883 | rmudgett | 2011-05-25 17:25:18 -0500 (Wed, 25 May 2011) | 17 lines
Native SIP CCSS sends bad CC cancel SUBSCRIBE message.
The SUBSCRIBE message used to cancel a CC request has incorrect To/From
SIP headers. They are reversed and the dialog tags are the same when they
should not be. If pedantic mode was disabled, then the cancel would have
succeeded despite the incorrect message.
* The SIP_OUTGOING flag was not set correctly for the dialog and I had to
move some CC subscribe handling code as a result.
* Initialized the dialog subscribed type to CALL_COMPLETION earlier. If a
CC request SUBSCRIBE message comes in and the CC instance is not found,
the 404 response was duplicated.
JIRA AST-568
JIRA SWP-3493
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@320884 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r320180 | mnicholson | 2011-05-20 13:48:46 -0500 (Fri, 20 May 2011) | 16 lines
This commit modifies the way polling is done on TLS sockets.
Because of the buffering the TLS layer does, polling is unreliable. If poll is
called while there is data waiting to be read in the TLS layer but not at the
network layer, the messaging processing engine will not proceed until something
else writes data to the socket, which may not occur. This change modifies the
logic around TLS sockets to only poll after a failed read on a non-blocking
socket. This way we know that there is no data waiting to be read from the
buffering layer.
(closes issue #19182)
Reported by: st
Patches:
ssl-poll-fix3.diff uploaded by mnicholson (license 96)
Tested by: mnicholson
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@320181 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r319938 | jrose | 2011-05-20 08:28:24 -0500 (Fri, 20 May 2011) | 12 lines
Adds legacy_useroption_parsing to address interoperability concerns.
With the new option engaged, Asterisk should interpret user fields with useroptions
contained within the userfield of the uri by stripping them out of the original message
whenever a semicolon is encountered in the userfield string.
(closes issue #18344)
Reported by: danimal
Tested by: jrose
Review: https://reviewboard.asterisk.org/r/1223/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r319654 | twilson | 2011-05-18 16:15:58 -0700 (Wed, 18 May 2011) | 22 lines
Merged revisions 319653 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r319653 | twilson | 2011-05-18 16:11:57 -0700 (Wed, 18 May 2011) | 15 lines
Merged revisions 319652 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r319652 | twilson | 2011-05-18 16:04:35 -0700 (Wed, 18 May 2011) | 8 lines
Make sure everyone gets an unhold when a transfer succeeds
Some phones, like the Snom phones, send a hold to the transfer target after
before sending the REFER. We need to make sure that we unhold the parties
that are being connected after the masquerade. If Local channels with the /nm
option are used when dialing the parties, hold music would still be playing on
the transfer target, even after being connected with the transferee.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319661 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r319552 | twilson | 2011-05-18 13:22:36 -0700 (Wed, 18 May 2011) | 11 lines
Unbreak the storing of registrations for restart
The fix for issue 18882 broke retrieving non-realtime peers from the ast_db
on restart/reload. This patch tries to unbreak things while leaving the intent
of the original fix intact.
(closes issue #19318)
Reported by: remiq
Patches:
diff.txt uploaded by twilson (license 396)
Tested by: lmadsen, remiq
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319564 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r319469 | rmudgett | 2011-05-17 16:57:56 -0500 (Tue, 17 May 2011) | 22 lines
Merged revision 319468 from
https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
..........
r319468 | rmudgett | 2011-05-17 16:49:31 -0500 (Tue, 17 May 2011) | 15 lines
The mISDN HDLC mode is prevented on dialed channels.
The use of mISDN HDLC mode is prevented if the mISDN dial technology
option 'h1' is used when config option astdtmf=yes.
There is a bug in channels/misdn/isdn_lib.c which prevents the use of HDLC
mode. Instead of setting the channel to HDLC mode it is set to
transparent(no dsp, no hdlc), although hdlc is not "no hdlc". I.e the
logging message is correct, but the if condition is not.
Make check the nodsp and hdlc flags.
JIRA ABE-2787
JIRA SWP-3437
..........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319471 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The NEC SV8300 rejects the Q931_IE_TIME_DATE for Q.SIG.
Add option to specify if and how much of the current time is put in
Q931_IE_TIME_DATE.
* Send date/time ie never.
* Send date/time ie date only.
* Send date/time ie date and hour.
* Send date/time ie date, hour, and minute.
* Send date/time ie date, hour, minute, and second.
* Send date/time ie default: Libpri will send date and hhmm only when in
NT PTMP mode to support ISDN phones.
(closes issue #19221)
Reported by: kenner
JIRA SWP-3396
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Probably haven't been working for a couple of years. May still need
some more love, but they are now working, both as a hint device and
monitoring a hint. Changes centre around the long ago change
to remove the requirement for a device name in a skinny line, and
changes to the transmit_* functions.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319316 65c4cc65-6c06-0410-ace0-fbb531ad65f3
state of the channel reverts to unknown this should be rejected.
this is important for negotiating T.38 gateway see #13405
This patch adds a option T38_REJECTED that behaves as T38_DISABLED except it reports state rejected.
Trivial Change to res_fax to honnor UNAVAILABLE and REJECTED states.
(closes issue #18889)
Reported by: irroot
Tested by: irroot, darkbasic, mnicholson
Review: https://reviewboard.asterisk.org/r/1115
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319087 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When called, activatesub first cleans up the active sub and then
handles the sub passed. dialandactivatesub first sets sub->exten
and then calls activatesub. Revise handle_offhook to utilise the
callid sent to chan_skinny. Some other minor fixes especially around
d->hookstate (which still needs some more work).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319024 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were some issues where if a simple switch was cancelled and a
new switch started before the first had timed out where the d->exten
would be used for both subchannels. This was bad leading to possible
invalid extensions if some digits had been entered in the abandoned
simple switch and the second one was completed before the first timed
out, or the second would be cancelled because d->exten would be set to
nothing on the time out of the first.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318833 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318783 | rmudgett | 2011-05-12 20:47:05 -0500 (Thu, 12 May 2011) | 14 lines
PRI early media won't ring.
And another way to pass early media. Don't indicate that there is inband
information present, just assume that the B channel is connected.
* Restore clearing the dialing flag Rx squelch unconditionally when a
PROCEEDING message comes in.
(closes issue #19268)
Reported by: tbsky
Patches:
issue19268_v1.8.patch uploaded by rmudgett (license 664)
Tested by: tbsky
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318784 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318671 | alecdavis | 2011-05-13 10:52:08 +1200 (Fri, 13 May 2011) | 30 lines
Fix directed group pickup feature code *8 with pickupsounds enabled
Since 1.6.2, the new pickupsound and pickupfailsound in features.conf cause many issues.
1). chan_sip:handle_request_invite() shouldn't be playing out the fail/success audio, as it has 'netlock' locked.
2). dialplan applications for directed_pickups shouldn't beep.
3). feature code for directed pickup should beep on success/failure if configured.
Created a sip_pickup() thread to handle the pickup and playout the audio, spawned from handle_request_invite.
Moved app_directed:pickup_do() to features:ast_do_pickup().
Functions below, all now use the new ast_do_pickup()
app_directed_pickup.c:
pickup_by_channel()
pickup_by_exten()
pickup_by_mark()
pickup_by_part()
features.c:
ast_pickup_call()
(closes issue #18654)
Reported by: Docent
Patches:
ast_do_pickup_1.8_trunk.diff.txt uploaded by alecdavis (license 585)
Tested by: lmadsen, francesco_r, amilcar, isis242, alecdavis, irroot, rymkus, loloski, rmudgett
Review: https://reviewboard.asterisk.org/r/1185/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318672 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Consolidate the functions and add some debugging info. Allows to be
able to set a substate without explicitly knowing what the state is.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318635 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add the setsubstate_onhook to complete the initial substate handling
procedures. Added dumpsub(sub, forcehangup) which is the common way of
calling setsubstate_onhook. Dumpsub attempts to activate another sub
after setting the current one onhook.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318600 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r318549 | twilson | 2011-05-11 13:39:48 -0500 (Wed, 11 May 2011) | 27 lines
Merged revisions 318548 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r318548 | twilson | 2011-05-11 12:15:39 -0500 (Wed, 11 May 2011) | 19 lines
Clean up several chan_sip reference leaks
Several situations in the code could lead to peers or sip_pvt references
being leaked. This would cause RTP ports to never be destroyed (leading
to exhaustion of all available RTP ports) and memory leaks.
The original patch for this issue from rgagnon was the result of an
obscene amount of testing and hard work, for which I am very grateful. I
did some cleanup and added a few additional refcount fixes that I found.
(closes issue #17255)
Reported by: kvveltho
Patches:
tag-1.6.2.17-r309252-sip-dos-mem-leak-fix.diff uploaded by rgagnon (license 1202)
Tested by: rgagnon, twilson, wdoekes, loloski
Review: https://reviewboard.asterisk.org/r/1101/
Review: https://reviewboard.asterisk.org/r/1207/
Review: https://reviewboard.asterisk.org/r/1210/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318551 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318499 | rmudgett | 2011-05-10 18:41:08 -0500 (Tue, 10 May 2011) | 15 lines
Unable to pickup DAHDI/PRI call because call state is reported as DIALING.
The channel state is not updated to RINGING when an ALERTING message is
received. Regression caused when sig_pri.c (also sig_ss7.c) extracted
from chan_dahdi.c.
* Added missing channel state update to RINGING when the
AST_CONTROL_RINGING frame is queued for ISDN and SS7.
(closes issue #19257)
Reported by: alecdavis
Patches:
issue19257_v1.8_v2.patch uploaded by rmudgett (license 664)
Tested by: alecdavis, rmudgett
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318500 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r318337 | twilson | 2011-05-09 15:23:15 -0500 (Mon, 09 May 2011) | 18 lines
Merged revisions 318331 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r318331 | twilson | 2011-05-09 15:04:41 -0500 (Mon, 09 May 2011) | 12 lines
Don't offer video to directmedia callee unless caller offered it as well
Make sure that when directmedia is enabled, that video is not offered to the
callee even if it supports it. p->vrtp will not exist since the caller didn't
offer video.
(closes issue #19195)
Reported by: one47
Patches:
sip_cant_add_video_rtp uploaded by one47 (license 23)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r318231 | rmudgett | 2011-05-09 11:57:18 -0500 (Mon, 09 May 2011) | 41 lines
Don't get early media for ISDN on outgoing calls.
It looks to be a long-standing misinterpretation of the progress indicator
ie values:
1 - Call is not end-to-end ISDN; further call progress information may be
available in-band.
8 - In-band information or an appropriate pattern is now available.
Only value 8 is handled by chan_dahdi/sig_pri. The 1 value is not handled
as early media probably because the meaning of the second half of it's
description was overlooked.
* Test to see if either PRI_PROG_CALL_NOT_E2E_ISDN(1) or
PRI_PROG_INBAND_AVAILABLE(8) bits are set to open the media path.
(closes issue #18868)
Reported by: isrl
Patches:
issue18868_19246_v1.8.patch uploaded by rmudgett (license 664)
Tested by: satish_lx
..........
No inband progress on PRI_EVENT_RINGING even if inband flag set.
My ISDN-PRI provider sends an ALERTING with "Inband information or
appropriate pattern now available", but Asterisk only generates and passes
the RING to the SIP extension, not the inband message. Unfortunately, the
inband message is not a ringback tone but a prompt that says the number is
not in service. The SIP extension then hears two rings and the call is
hungup which confuses the caller.
* Post an AST_CONTROL_PROGRESS as well as opening the media path if inband
audio is indicated with an ALERTING message.
(closes issue #19246)
Reported by: cristiandimache
Patches:
issue19246_v1.8.patch uploaded by rmudgett (license 664)
Tested by: cristiandimache
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318232 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a call is made to a line that already has a call and the device is
offhook (ie activeish call), the call is set to CALLWAIT rather than RINGIN.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Long time coming, finally moving the hookstate from line to device.
This may fix some issues where a device has multiple lines. Previously
we had to run through all lines on a device to see if it was actually
onhook or not.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317996 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r317867 | russell | 2011-05-06 15:01:16 -0500 (Fri, 06 May 2011) | 10 lines
chan_sip: Destroy variables on a sip_pvt before copying vars from the sip_peer.
Don't duplicate variables on the sip_pvt. Just reset the variable list each
time.
(closes issue #19202)
Reported by: wdoekes
Patches:
issue19202_destroy_challenged_invite_chanvars.patch uploaded by wdoekes (license 717)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r317865 | russell | 2011-05-06 14:46:49 -0500 (Fri, 06 May 2011) | 11 lines
chan_sip: fix a deadlock in check_rtp_timeout.
Don't block doing silly deadlock avoidance. Just return and try again later.
The funciton gets called often enough that it's fine. Also, this change was
already made in trunk.
(closes issue #18791)
Reported by: irroot
Patches:
chan_sip.rtptimeout.patch uploaded by irroot (license 52)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317866 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r317670 | rmudgett | 2011-05-06 11:19:18 -0500 (Fri, 06 May 2011) | 22 lines
Fix SIP connected line updates.
This patch fixes a couple SIP connected line update problems:
1) The connected line needs to be updated when the initial INVITE is sent
if there is a peer callerid configured. Previously, the connected line
information did not get reported until the call was connected so SIP could
not report connected line information in ringing or progress messages.
2) The connected line should not be updated on initial connect if there is
no connected line information. Previously, all it did was wipe out any
default preset CONNECTEDLINE information set by the dialplan with empty
strings.
(closes issue #18367)
Reported by: GeorgeKonopacki
Patches:
issue18367_v1.8.patch uploaded by rmudgett (license 664)
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1199/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317671 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r317478 | russell | 2011-05-05 17:53:45 -0500 (Thu, 05 May 2011) | 12 lines
Fix some consistency issues with jitterbuffer config.
Store the defaults noted in the sample config files in the jitterbuffer config
data structure. This makes the CLI commands that output these settings show
the right thing. Also only show the settings that are relevant in the settings
CLI commands, based on which jitterbuffer is selected and whether it's enabled.
(closes issue #19083)
Reported by: rgagnon
Patches:
issue-19083-trunk-r313139.diff uploaded by rgagnon (license 1202)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
skinny_hold moved to setsubstate_hold and skinny_unhold integrated into
setsubstate_connected. Removed sub->onhold and replaced with
SUBSTATE_HOLD.
Also fixed inbound call answering by queueing an AST_CONTROL_ANSWER on
answering a SUBSTATE_RINGIN sub (was a typo).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317382 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r317283 | jrose | 2011-05-05 14:09:13 -0500 (Thu, 05 May 2011) | 10 lines
Resolves a deadlock that occurs during sip_new
This is based on an uncommitted patch by jpeeler for the issue. Instead of
relocking and then unlocking the channel though, we keep the lock on the channel
until we are finished doing what we need to the channel.
(closes issue #18441)
Reported by: Alric
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317334 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r317281 | russell | 2011-05-05 13:39:44 -0500 (Thu, 05 May 2011) | 29 lines
Merged revisions 317255 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r317255 | russell | 2011-05-05 13:29:53 -0500 (Thu, 05 May 2011) | 22 lines
Merged revisions 317211 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r317211 | russell | 2011-05-05 13:20:29 -0500 (Thu, 05 May 2011) | 15 lines
chan_sip: fix broken realtime peer count, fix memory leak
This patch addresses two bugs in chan_sip:
1) The count of realtime peers and users was off. The increment checked the
value of the caching option, while the decrement did not.
2) Add a missing regfree() for a regex.
(closes issue #19108)
Reported by: vrban
Patches:
missing_regfree.patch uploaded by vrban (license 756)
sip_object_counter.patch uploaded by vrban (license 756)
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317282 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r317196 | mnicholson | 2011-05-05 13:02:52 -0500 (Thu, 05 May 2011) | 8 lines
Set SO_KEEPALIVE on SIP TCP sockets so that they eventually go away when a peer
abruptly disappears. This mostly occurs after a successful registration.
(closes issue #17544)
Reported by: marcelloceschia
Patches:
(modified) tcptls.patch uploaded by st (license 907)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317198 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move handling of both state handling from skinny_indicate to it's own sub.
Also, modified behaviour to not hangup the sub and let the dialplan
have a chance in doing what it wants for congestion. Added various states to
substate2str and added these states where applicable for other set_substate_
procs.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317026 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move handling of setting busy state from skinny_indicate to it's own sub.
Also, modified behaviour to not hangup the sub and let the dialplan
have a chance in doing what it wants (eg busy(10); hangup() in the dialplan
now gives a busy indication for 10 secs and then hangs up.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316994 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Renamed previous setsubstate_ringout to setsubstate_dialing for a state
when attempting to dial a number, substate ringout now for when core
has indicated that the channel is actually ringing on the other end.
Also added substate2str for debugging purposes.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316885 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r316617 | dvossel | 2011-05-04 08:44:41 -0500 (Wed, 04 May 2011) | 19 lines
Merged revisions 316616 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r316616 | dvossel | 2011-05-04 08:40:41 -0500 (Wed, 04 May 2011) | 12 lines
Fixes session-timers=refuse not being enforced for *caller*
During handle_request_invite, the session timer mode was retrieved from
a cached variable. This patch forces a peer lookup of the session timer
mode in the case of an incoming invite.
(closes issue #18804)
Reported by: wdoekes
Patches:
issue18804_session_timer_refuse_caller.patch uploaded by wdoekes (license 717)
issue_18804_v2.diff uploaded by dvossel (license 671)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316618 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added setsubstate_ringin. skinny_call now calls sss_ringin rather than inline.
Fixed previous issue so that setsubstate_connected now use SUBSTATE_RINGIN
to determine is an AST_CONTROL_ANSWER should be queued.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316584 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Cosolidated the code so that skinny_answer now uses the setsubstate procedures
rather than doing the handling inline.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316552 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Cosolidated the working out of the callinfo to be sent into
transmit_callinfo. Replaced ambiguous sub->outgoing with calldirection
which can be SKINNY_INCOMING or SKINNY_OUTGOING (same value as the
skinny protocol).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original implementation of this did the merging of all contexts with the
same name in the realtime layer, but that implementation severely breaks
drivers which use the same context name (e.g. iax.conf, type={peer,user}).
Therefore, the implementation needs to do the merging for particular entries
only, based upon what contexts would allow that in the channel driver itself.
This implementation is for chan_sip only, but others could be added in the
future.
(closes issue #17957)
Reported by: marcelloceschia
Patches:
chan-sip_parsing-general_branch162.patch uploaded by marcelloceschia (license 1079)
Tested by: tilghman
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316428 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r316224 | rmudgett | 2011-05-03 14:18:30 -0500 (Tue, 03 May 2011) | 16 lines
The dahdi_hangup() call does not clean up the channel fully.
After dahdi_hangup() has supposedly hungup an ISDN channel there is still
traffic on the S0-bus because the channel was not cleaned up fully.
Shuffled the hangup code to include some missing cleanup. Also fixed some
code formatting in the area. I think the primary missing clean up code
was the call to tone_zone_play_tone() to turn off any active tones on the
channel.
(closes issue #19188)
Reported by: jg1234
Patches:
issue19188_v1.8.patch uploaded by rmudgett (license 664)
Tested by: jg1234
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r316217 | dvossel | 2011-05-03 13:59:06 -0500 (Tue, 03 May 2011) | 9 lines
Never put the Require: timer header in an Invite.
This has already been discussed and should have been resolved earlier. View
revsion 285565's log for more information about why it is important to not
put timer in the Require header.
(closes issue #18704)
Reported by: mfrager
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316218 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r315894 | mnicholson | 2011-04-27 14:14:27 -0500 (Wed, 27 Apr 2011) | 28 lines
Merged revisions 315893 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r315893 | mnicholson | 2011-04-27 14:03:05 -0500 (Wed, 27 Apr 2011) | 21 lines
Merged revisions 315891 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r315891 | mnicholson | 2011-04-27 13:57:56 -0500 (Wed, 27 Apr 2011) | 14 lines
Fix our compliance with RFC 3261 section 18.2.2.
This change optimizes the free_via() function and removes some redundant null
checking. It also fixes compliance with RFC 3261 section 18.2.2 by always using
the port specified in the Via header for routing responses (even when maddr is
not set). Also the htons() function is now used when setting the port.
Additional documentation comments have been added in various places to make the
logic in the code clearer.
(closes issue #18951)
Reported by: jmls
Patches:
issue18951_set_proper_port_from_via.patch uploaded by wdoekes (license 717) (modified)
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@315895 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r315446 | russell | 2011-04-26 12:40:23 -0500 (Tue, 26 Apr 2011) | 14 lines
chan_local: resolve a deadlock.
This patch resolves a fairly complex deadlock that can occur with the
combination of chan_local and a dialplan switch, such as dynamic realtime
extensions, which pulls autoservice into the picture when doing a dialplan
lookup.
(closes issue #18818)
Reported by: nic
Patches:
issue18818.patch uploaded by jthurman (license 614)
18818.v1.txt uploaded by russell (license 2)
Tested by: nic, jthurman, kterzi, steve-howes, sysreq, IshMalik
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@315447 65c4cc65-6c06-0410-ace0-fbb531ad65f3
PRIShowSpans works like the AMI action DAHDIShowChannels but for PRI
spans. It is similar to the CLI command "pri show spans".
(closes issue #15980)
Reported by: dwery
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314735 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r314628 | mnicholson | 2011-04-21 13:24:05 -0500 (Thu, 21 Apr 2011) | 27 lines
Merged revisions 314620 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r314620 | mnicholson | 2011-04-21 13:22:19 -0500 (Thu, 21 Apr 2011) | 20 lines
Merged revisions 314607 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r314607 | mnicholson | 2011-04-21 13:19:21 -0500 (Thu, 21 Apr 2011) | 14 lines
Added limits to the number of unauthenticated sessions TCP based protocols are allowed to have open simultaneously. Also added timeouts for unauthenticated sessions where it made sense to do so.
Unrelated, the manager interface now properly checks if the user has the "system" privilege before executing shell commands via the Originate action.
AST-2011-005
AST-2011-006
(closes issue #18787)
Reported by: kobaz
(related to issue #18996)
Reported by: tzafrir
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314666 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r314550 | twilson | 2011-04-20 17:23:04 -0700 (Wed, 20 Apr 2011) | 13 lines
Merged revisions 314549 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r314549 | twilson | 2011-04-20 17:17:34 -0700 (Wed, 20 Apr 2011) | 6 lines
Don't allocate more space than necessary for a sip_pkt
This extra allocation is a hold-over from when pkt->data was a
character array. Now that it is an allocated string, just allocate
enough for the sip_pkt.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314551 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The "controlling user number" is always the number of the voice mail box
which is identical with the subscriber number itself. This number which
is listed in the ISDN phone MWI menu cannot be called back to contact the
voice mail box. The controlling user number should be made configurable.
JIRA ABE-2738
JIRA SWP-2846
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314116 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r314067 | dvossel | 2011-04-18 10:23:45 -0500 (Mon, 18 Apr 2011) | 22 lines
Remove the need for deadlock avoidance in chan_sip do_monitor.
Deadlock avoidance between the sip pvt and the pvt->owner is
very difficult. Now that channel's are ao2 objects, this complication
is no longer necessary. It turns out the pvt's msg queue only
exists because of deadlock avoidance (when deadlock avoidance fails
msgs were added to a queue to be processed later), so this goes away as well.
The technique used in the new sip_lock_pvt_full() function should
be used as a template for replacing all locations where deadlock
avoidance occurs between a channel tech_pvt and the pvt's owner.
My hope is that this will begin a reversal of the invalid channel
driver locking architecture we have been using for so long.
This patch also resolves an issue where the pvt->owner gets
unlocked during processing the msg queue.
(closes issue #18690)
Reported by: dvossel
Review: https://reviewboard.asterisk.org/r/1182/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314078 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r314017 | dvossel | 2011-04-18 08:41:06 -0500 (Mon, 18 Apr 2011) | 17 lines
sip codec negotiation of dynamic rtp payloads error fix
This patch fixes how chan_sip handles dynamic rtp payload types
it does not understand. At the moment if a dynamic payload's mime
type does not match one we understand, the payload does not get
removed from our payload table. As a result of this, the payload
is set to whatever dynamic codec we use internally for that payload
number on outgoing INVITES. This is incorrect.
This patch fixes this by properly checking the rtpmap set function's
return code to make sure it was found. The function can return both
-1 and -2 depending on the source of the mismatch. We were just
checking -1 explicitly.
Review: https://reviewboard.asterisk.org/r/1169/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314018 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r313780 | rmudgett | 2011-04-14 15:59:56 -0500 (Thu, 14 Apr 2011) | 20 lines
Leftover debug messages unconditionally sent to the console.
Executing Dial(DAHDI/1/18475551212,300,) with the echotraining config
option enabled outputs the following debug messages unconditionally:
Dialing T1847555121 on 1
Dialing www2w on 1
* Made debug messages in my_dial_digits() normal debug messages that do
not get output unless enabled.
* Reworded some debug messages in my_dial_digits() to be clearer.
* Replace strncpy() with ast_copy_string() in my_dial_digits() which does
the same job better.
(closes issue #18847)
Reported by: vmikhelson
Tested by: rmudgett
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@313781 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
also went ahead and fixed the problem it introduces before committing.
........
r313435 | jrose | 2011-04-12 13:44:44 -0500 (Tue, 12 Apr 2011) | 1 line
fixing stupid mistake with putting code before variable declaration
........
Merged revisions 313433 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r313432 | jrose | 2011-04-12 13:12:29 -0500 (Tue, 12 Apr 2011) | 14 lines
reload Chan_dahdi memory leak caused by variables
chan_dahdi reloading with variables set via setvar in chan_dahdi.conf would
stay in the dahdi_pvt structs for individual channels (causing them to just
continue adding the new ones to the list) and also there was a memory leak
causes by the conf objects. This patch resolves both of these by using
ast_variables_destroy during the loading process.
(closes issue #17450)
Reported by: nahuelgreco
Patches:
patch.diff uploaded by jrose (license 1225)
Tested by: tilghman, jrose
Review: https://reviewboard.asterisk.org/r/1170/
........
........
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@313437 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r313190 | rmudgett | 2011-04-11 10:40:30 -0500 (Mon, 11 Apr 2011) | 39 lines
Merged revisions 313189 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r313189 | rmudgett | 2011-04-11 10:32:53 -0500 (Mon, 11 Apr 2011) | 32 lines
Merged revisions 313188 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r313188 | rmudgett | 2011-04-11 10:27:52 -0500 (Mon, 11 Apr 2011) | 25 lines
Stuck channel using FEATD_MF if caller hangs up at the right time.
The cause was actually a caller hanging up just at the end of the Feature
Group D DTMF tones that setup the call. The reason for this is a "guard
timer" that's implemented using ast_safe_sleep(100). If the caller
happens to hang up AFTER the final tone of the DTMF string but BEFORE the
end of that ast_safe_sleep(), then ast_safe_sleep() will return non-zero.
This causes the code to bounce to the end of ss_thread(), but it does NOT
tear down the call properly.
This should be a rare occurrence because the caller has to hang up at
EXACTLY the right time. Nonetheless, it was happening quite regularly on
the reporter's system. It's not easily reproducible, unless you purposely
increase the guard-time to 2000 or more. Once you do that, you can
reproduce it every time by watching the DTMF debug and hanging up just as
it ends.
Simply add an ast_hangup() before goto quit.
(closes issue #15671)
Reported by: jcromes
Patches:
issue15671.patch uploaded by pabelanger (license 224)
Tested by: jcromes
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@313191 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r313001 | alecdavis | 2011-04-07 22:19:31 +1200 (Thu, 07 Apr 2011) | 13 lines
Fix ISDN calling subaddr User Specified Odd/Even Flag
Calculation of the Odd/Even flag was wrong.
Implement correct algo, and set odd/even=0 if data would be truncated.
Only allow automatic calculation of the O/E flag, don't let dialplan influence.
(closes issue #19062)
Reported by: festr
Patches:
bug19062.diff2.txt uploaded by alecdavis (license 585)
Tested by: festr, alecdavis, rmudgett
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@313005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r312949 | rmudgett | 2011-04-05 13:45:24 -0500 (Tue, 05 Apr 2011) | 6 lines
Crash if ISDN span layer 1 is down on initial load.
Regression from -r312575 B channel shifting during negotiation.
* Also combine updating the alarm flag with clearing the resetting flag.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r312866 | rmudgett | 2011-04-05 10:38:14 -0500 (Tue, 05 Apr 2011) | 15 lines
Responding to OPTIONS packet with 404 because Asterisk not looking for "s" extension.
The get_destination() function was not using the "s" extension when the
request URI did not specify an extension. This is a regression caused
when the URI parsing code was extracted into parse_uri().
Made get_destination() substitute the "s" extension when the parsed URI
results in an empty string.
(closes issue #18348)
Reported by: shmaize
Patches:
issue18348_v1.8.patch uploaded by rmudgett (license 664)
Tested by: shmaize
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r312575 | rmudgett | 2011-04-04 11:10:50 -0500 (Mon, 04 Apr 2011) | 52 lines
Merged revisions 312574 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r312574 | rmudgett | 2011-04-04 11:00:02 -0500 (Mon, 04 Apr 2011) | 45 lines
Merged revisions 312573 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r312573 | rmudgett | 2011-04-04 10:49:30 -0500 (Mon, 04 Apr 2011) | 38 lines
Issues with ISDN calls changing B channels during call negotiations.
The handling of the PROCEEDING message was not using the correct call
structure if the B channel was changed. (The same for PROGRESS.) The call
was also not hungup if the new B channel is not provisioned or is busy.
* Made all call connection messages (SETUP_ACKNOWLEDGE, PROCEEDING,
PROGRESS, ALERTING, CONNECT, CONNECT_ACKNOWLEDGE) ensure that they are
using the correct structure and B channel. If there is any problem with
the operations then the call is now hungup with an appropriate cause code.
* Made miscellaneous messages (INFORMATION, FACILITY, NOTIFY) find the
correct structure by looking for the call and not using the channel ID.
NOTIFY is an exception with versions of libpri before v1.4.11 because a
call pointer is not available for Asterisk to use.
* Made all hangup messages (DISCONNECT, RELEASE, RELEASE_COMPLETE) find
the correct structure by looking for the call and not using the channel
ID.
(closes issue #18313)
Reported by: destiny6628
Tested by: rmudgett
JIRA SWP-2620
(closes issue #18231)
Reported by: destiny6628
Tested by: rmudgett
JIRA SWP-2924
(closes issue #18488)
Reported by: jpokorny
JIRA SWP-2929
JIRA AST-437 (The issues fixed here are most likely causing this JIRA issue.)
JIRA DAHDI-406
JIRA LIBPRI-33 (Stuck resetting flag likely fixed)
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312579 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r312509 | rmudgett | 2011-04-01 18:15:42 -0500 (Fri, 01 Apr 2011) | 22 lines
When a call going out an NT-PTMP port gets rejected, Asterisk crashes.
If a call is sent to an ISDN phone that rejects the call with
RELEASE_COMPLETE(cause: call reject(21), or busy(17)) Asterisk crashes.
I could not get my setup to crash. However, I could see the possibility
from a race condition between queuing an AST_CONTROL_BUSY to the core and
then queueing an AST_CONTROL_HANGUP. If the AST_CONTROL_BUSY is processed
before the AST_CONTROL_HANGUP is queued, the ast_channel could be
destroyed out from under chan_misdn.
Avoid this particular crash scenario by not queueing the
AST_CONTROL_HANGUP if the AST_CONTROL_BUSY was queued.
(closes issue #18408)
Reported by: wimpy
Patches:
issue18408_v1.8.patch uploaded by rmudgett (license 664)
Tested by: rmudgett, wimpy
JIRA SWP-2679
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312510 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In chan_dahdi.conf, the user can now use length 4 patterns in addition to the usual length 2 patterns. The s
ntax remains the same and the method used to track the pattern history will only change when using the length
4 patterns.
(closes issue SWP-3250)
Code:
jrose
rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r312022 | rmudgett | 2011-03-31 15:11:40 -0500 (Thu, 31 Mar 2011) | 14 lines
chan_misdn segfaults when DEBUG_THREADS is enabled.
The segfault happens because jb->mutexjb is uninitialized from the
ast_malloc(). The internals of ast_mutex_init() were assuming a nonzero
value meant mutex tracking initialization had already happened. Recent
changes to mutex tracking code to reduce excessive memory consumption
exposed this uninitialized value.
Converted misdn_jb_init() to use ast_calloc() instead of ast_malloc().
Also eliminated redundant zero initialization code in the routine.
(closes issue #18975)
Reported by: irroot
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312023 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r311612 | bbryant | 2011-03-23 17:45:46 -0400 (Wed, 23 Mar 2011) | 9 lines
Fix a possible crash in sip/reqresp_parser.c that is caused by a possible null
value.
(closes issue #18821)
Reported by: cmaj
Patches:
patch-reqresp_parser_sip_uri_domain_cmp_c_locale-crash-1.8.3-rc2.diff.tx
uploaded by cmaj (license 830)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@311613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r311558 | twilson | 2011-03-22 19:24:53 -0700 (Tue, 22 Mar 2011) | 5 lines
Don't use static declared buf in parse_name_andor_addr
This function isn't used anywhere yet, but we definitely don't want
to keep the same value for buf between calls to the function.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@311559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r311352 | jrose | 2011-03-18 11:19:05 -0500 (Fri, 18 Mar 2011) | 10 lines
Changes some print statements/events to use a blank string in place of NULL if the string in question is NULL.
This is supposed to improve Solaris compatibility since Solaris goes berserk when trying to output NULL strings.
(closes issue #18759)
Reported by: bklang
Patches:
null-strings.patch uploaded by bklang (license 919)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@311373 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r311297 | rmudgett | 2011-03-17 21:59:05 -0500 (Thu, 17 Mar 2011) | 12 lines
Race condition when ISDN CallRerouting/CallDeflection invoked.
The queued AST_CONTROL_BUSY could sometimes be processed before the
call_forward dial string is recognized.
* Moved setting the call_forwarding dial string after sending a response
to the initiator and just queue an empty frame to wake up the media thread
instead of an AST_CONTROL_BUSY.
* Added check for empty rerouting/deflection number and respond with an
error.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@311298 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r309808 | tilghman | 2011-03-06 18:54:42 -0600 (Sun, 06 Mar 2011) | 14 lines
Merged revisions 309251 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r309251 | tilghman | 2011-03-01 19:06:02 -0600 (Tue, 01 Mar 2011) | 7 lines
Revert previous 2 commits, and instead conditionally redefine the same macro used in flex 2.5.35 that clashed with our workaround.
Not surprisingly, the workaround was exactly the same code as was provided by
the Flex maintainers, albeit in two different places, in different macros.
This should fix the FreeBSD builds, which have an older version of Flex.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@309809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r309445 | rmudgett | 2011-03-04 09:22:04 -0600 (Fri, 04 Mar 2011) | 46 lines
Get real channel of a DAHDI call.
Starting with Asterisk v1.8, the DAHDI channel name format was changed for
ISDN calls to: DAHDI/i<span>/<number>[:<subaddress>]-<sequence-number>
There were several reasons that the channel name had to change.
1) Call completion requires a device state for ISDN phones. The generic
device state uses the channel name.
2) Calls do not necessarily have B channels. Calls placed on hold by an
ISDN phone do not have B channels.
3) The B channel a call initially requests may not be the B channel the
call ultimately uses. Changes to the internal implementation of the
Asterisk master channel list caused deadlock problems for chan_dahdi if it
needed to change the channel name. Chan_dahdi no longer changes the
channel name.
4) DTMF attended transfers now work with ISDN phones because the channel
name is "dialable" like the chan_sip channel names.
For various reasons, some people need to know which B channel a DAHDI call
is using.
* Added CHANNEL(dahdi_span), CHANNEL(dahdi_channel), and
CHANNEL(dahdi_type) so the dialplan can determine the B channel currently
in use by the channel. Use CHANNEL(no_media_path) to determine if the
channel even has a B channel.
* Added AMI event DAHDIChannel to associate a DAHDI channel with an
Asterisk channel so AMI applications can passively determine the B channel
currently in use. Calls with "no-media" as the DAHDIChannel do not have
an associated B channel. No-media calls are either on hold or
call-waiting.
(closes issue #17683)
Reported by: mrwho
Tested by: rmudgett
(closes issue #18603)
Reported by: arjankroon
Patches:
issue17683_18603_v1.8_v2.patch uploaded by rmudgett (license 664)
Tested by: stever28, rmudgett
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@309446 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r309256 | qwell | 2011-03-02 13:54:20 -0600 (Wed, 02 Mar 2011) | 15 lines
Merged revisions 309255 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r309255 | qwell | 2011-03-02 13:53:47 -0600 (Wed, 02 Mar 2011) | 8 lines
Fix usage of "hasvoicemail=yes" and "mailbox=" in users.conf for SIP.
Since it's a duplicate, nothing is going to be done, so delme doesn't need to
be set at all. Strangely, when this was added, this was being set to 1 in 1.6,
and 0 in trunk.
(issue AST-439)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@309257 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r308945 | alecdavis | 2011-02-26 07:52:53 +1300 (Sat, 26 Feb 2011) | 21 lines
Fix Deadlock with attended transfer of SIP call
Call path
sip_set_rtp_peer (locks chan then pvt)
transmit_reinvite_with_sdp
try_suggested_sip_codec
pbx_builtin_getvar_helper (locks p->owner)
But by the time p->owner lock was attempted, seems as though chan and p->owner were different.
So in sip_set_rtp_peer, lock pvt first then lock p->owner using deadlocking methods.
(closes issue #18837)
Reported by: alecdavis
Patches:
bug18837-trunk.diff3.txt uploaded by alecdavis (license 585)
Tested by: alecdavis, Irontec, ZX81, cmaj
Review: [https://reviewboard.asterisk.org/r/1126/]
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308946 65c4cc65-6c06-0410-ace0-fbb531ad65f3
-Functional changes
1. Dynamic global format list build by codecs defined in codecs.conf
2. SILK 8khz, 12khz, 16khz, and 24khz with custom attributes defined in codecs.conf
3. Negotiation of SILK attributes in chan_sip.
4. SPEEX 32khz with translation
5. SLINEAR 8khz, 12khz, 24khz, 32khz, 44.1khz, 48khz, 96khz, 192khz with translation
using codec_resample.c
6. Various changes to RTP code required to properly handle the dynamic format list
and formats with attributes.
7. ConfBridge now dynamically jumps to the best possible sample rate. This allows
for conferences to take advantage of HD audio (Which sounds awesome)
8. Audiohooks are no longer limited to 8khz audio, and most effects have been
updated to take advantage of this such as Volume, DENOISE, PITCH_SHIFT.
9. codec_resample now uses its own code rather than depending on libresample.
-Organizational changes
Global format list is moved from frame.c to format.c
Various format specific functions moved from frame.c to format.c
Review: https://reviewboard.asterisk.org/r/1104/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308582 65c4cc65-6c06-0410-ace0-fbb531ad65f3
List the current mapping of DAHDI B channels to Asterisk channel names and
which calls are on hold or call-waiting. Calls on hold or call-waiting
are not associated with any B channel.
JIRA LIBPRI-27
JIRA SWP-2547
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307964 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r307879 | rmudgett | 2011-02-15 10:13:55 -0600 (Tue, 15 Feb 2011) | 37 lines
No response sent for SIP CC subscribe/resubscribe request.
Asterisk does not send a response if we try to subscribe for call
completion after we have received a 180 Ringing. You can only subscribe
for call completion when the call has been cleared.
When we receive the 180 Ringing, for this call, its call-completion state
is 'CC_AVAILABLE'. If we then send a subscribe message to Asterisk, it
trys to change the call-completion state to 'CC_CALLER_REQUESTED'.
Because this is an invalid state change, it just ignores the message. The
only state Asterisk will accept our subscribe message is in the
'CC_CALLER_OFFERED' state.
Asterisk will go into the 'CC_CALLER_OFFERED' when the SIP client clears
the call by sending a CANCEL.
Asterisk should always send a response. Even if its a negative one.
The fix is to allow for the CCSS core to notify a CC agent that a failure
has occurred when CC is requested. The "ack" callback is replaced with a
"respond" callback. The "respond" callback has a parameter indicating
either a successful response or a specific type of failure that may need
to be communicated to the requester.
(closes issue #18336)
Reported by: GeorgeKonopacki
Tested by: mmichelson, rmudgett
JIRA SWP-2633
(closes issue #18337)
Reported by: GeorgeKonopacki
Tested by: mmichelson
JIRA SWP-2634
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307883 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The nativeformats field was being overwritten when it should have been
appended too. This caused some format capabilities to be lost briefly and
some log warnings to be output.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307433 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Pass a MCID request to the bridged channel so the bridged channel can send
it to the network.
The ability to send the MCID request on an ISDN span is enabled with the
new chan_dahdi.conf mcid_send option.
JIRA SWP-2845
JIRA ABE-2736
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306755 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r306619 | twilson | 2011-02-07 14:15:27 -0800 (Mon, 07 Feb 2011) | 24 lines
Merged revisions 306618 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r306618 | twilson | 2011-02-07 13:59:54 -0800 (Mon, 07 Feb 2011) | 17 lines
Merged revisions 306617 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r306617 | twilson | 2011-02-07 13:51:43 -0800 (Mon, 07 Feb 2011) | 10 lines
Don't allow a REFER w/replaces to replace its own dialog
Asterisk currently accepts a REFER with a Refer-To with an embedded Replaces
header that matches the dialog of the REFER. This would be a situation like A
calls B, A calls C, A transfers B to A, which is just silly. This patch makes
the transfer fail instead of making Asterisk freak out and forget to hang other
channels up.
Review: https://reviewboard.asterisk.org/r/1093/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306670 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The display ie handling can be controlled independently in the send and
receive directions with the following options:
* Block display text data.
* Use display text in SETUP/CONNECT messages for name.
* Use display text for COLP name updates (FACILITY/NOTIFY as appropriate).
* Pass arbitrary display text during a call. Sent in INFORMATION
messages. Received from any message that the display text was not used as
a name.
If the display options are not set then the options default to legacy
behavior.
The arbitrary display text is exchanged between bridged channels using the
AST_FRAME_TEXT frame type.
To send display text from the dialplan use the SendText() application when
the arbitrary display text option is enabled.
JIRA SWP-2688
JIRA ABE-2693
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306396 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r306215 | jpeeler | 2011-02-03 17:49:28 -0600 (Thu, 03 Feb 2011) | 20 lines
Fix SIP deadlock involving state changes.
Once again a call to pbx_builtin_getvar_helper (and pbx_builtin_setvar_helper)
has caused locking problems. Both of these functions lock the channel when
the channel argument is passed in!
In this case, the suspected problem (the backtrace makes it impossible to tell)
was the private being locked in sip_set_rtp_peer and then:
transmit_reinvite_with_sdp
try_suggested_sip_codec
pbx_builtin_getvar_helper
(Traced to verify that the fix was only required in 1.8 and later.)
(closes issue #18491)
Reported by: cmaj
Patches:
chan_sip_fix_deadlocks_bug_18491.txt uploaded by cmaj (license 830)
Tested by: cmaj
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306216 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r306127 | twilson | 2011-02-03 13:03:26 -0800 (Thu, 03 Feb 2011) | 23 lines
Merged revisions 306126 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r306126 | twilson | 2011-02-03 12:56:00 -0800 (Thu, 03 Feb 2011) | 16 lines
Merged revisions 306119 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r306119 | twilson | 2011-02-03 12:36:34 -0800 (Thu, 03 Feb 2011) | 9 lines
Set hangup cause in local_hangup
When a call involves a local channel (like SIP -> Local -> SIP), the hangup
cause was not being set. This resulted in SIP channels sometimes getting a
503 error instead of a 486 when the far side sent a busy. In Asterisk 1.8+
this also can cause issues with CCSS that involve a local channel. This patch
sets the hangupcause for one side of the local channel to the other in
local_hangup for outbound calls.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306128 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r305923 | rmudgett | 2011-02-02 18:24:40 -0600 (Wed, 02 Feb 2011) | 24 lines
Merged revisions 305889 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r305889 | rmudgett | 2011-02-02 18:15:07 -0600 (Wed, 02 Feb 2011) | 17 lines
Merged revisions 305888 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r305888 | rmudgett | 2011-02-02 18:02:43 -0600 (Wed, 02 Feb 2011) | 8 lines
Minor AST_FRAME_TEXT related issues.
* Include the null terminator in the buffer length. When the frame is
queued it is copied. If the null terminator is not part of the frame
buffer length, the receiver could see garbage appended onto it.
* Add channel lock protection with ast_sendtext().
* Fixed AMI SendText action ast_sendtext() return value check.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@305939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r305343 | rmudgett | 2011-01-31 18:01:09 -0600 (Mon, 31 Jan 2011) | 21 lines
Merged revisions 305342 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r305342 | rmudgett | 2011-01-31 17:50:10 -0600 (Mon, 31 Jan 2011) | 14 lines
Merged revisions 305341 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r305341 | rmudgett | 2011-01-31 17:45:58 -0600 (Mon, 31 Jan 2011) | 7 lines
Obtain the pri lock for PRI queue counters.
Need to obtain the pri lock when calling pri_dump_info_str() to avoid a
reentrancy problem when calculating the Q.921 Q count statistic.
JIRA AST-484
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@305344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r305254 | qwell | 2011-01-31 17:07:00 -0600 (Mon, 31 Jan 2011) | 24 lines
Merged revisions 305253 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r305253 | qwell | 2011-01-31 16:59:34 -0600 (Mon, 31 Jan 2011) | 17 lines
Merged revisions 305252 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r305252 | qwell | 2011-01-31 16:56:54 -0600 (Mon, 31 Jan 2011) | 10 lines
Prevent a crash when dialing a technology with no destination (ex: Dial(SIP/))
chan_iax2 and other channel drivers already had code to prevent this. The
attempt that app_dial was making to prevent it was not correct, so I fixed that.
(closes issue #18371)
Reported by: gbour
Patches:
18371.patch uploaded by gbour (license 1162)
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@305255 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r303962 | twilson | 2011-01-25 16:09:01 -0600 (Tue, 25 Jan 2011) | 30 lines
Merged revisions 303960 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303960 | twilson | 2011-01-25 16:02:42 -0600 (Tue, 25 Jan 2011) | 23 lines
Merged revisions 303906 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303906 | twilson | 2011-01-25 14:50:59 -0600 (Tue, 25 Jan 2011) | 16 lines
Guard against retransmitting BYEs indefinitely
In the case of an attended transfer (A calls B, A atxfers to C) where
A becomes unreachable before replying to Asterisk's BYE, Asterisk can
sometimes retransmit the BYE indefinitely. This is because
__sip_autodestruct tests p->refer && !ast_test_flag(&p->flags[0],
SIP_ALREADYGONE and will then transmit a BYE. When this BYE times out,
it will not ever be marked as ALREADYGONE, so when __sip_autodestruct
is called again, we end up starting the cycle over.
This patch adds a call to sip_alreadygone(pkt->owner) in retrans_pkt
in the case of a BYE that has timed out. This should prevent Asterisk
from trying to transmit new BYE messages in the future.
Review: https://reviewboard.asterisk.org/r/1077/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303963 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r303771 | rmudgett | 2011-01-25 11:49:20 -0600 (Tue, 25 Jan 2011) | 54 lines
Merged revisions 303769 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303769 | rmudgett | 2011-01-25 11:42:42 -0600 (Tue, 25 Jan 2011) | 47 lines
Merged revisions 303765 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303765 | rmudgett | 2011-01-25 11:36:50 -0600 (Tue, 25 Jan 2011) | 40 lines
Sending out unnecessary PROCEEDING messages breaks overlap dialing.
Issue #16789 was a good idea. Unfortunately, it breaks overlap dialing
through Asterisk. There is not enough information available at this point
to know if dialing is complete. The ast_exists_extension(),
ast_matchmore_extension(), and ast_canmatch_extension() calls are not
adequate to detect a dial through extension pattern of "_9!".
Workaround is to use the dialplan Proceeding() application early in
non-dial through extensions.
* Effectively revert issue #16789.
* Allow outgoing overlap dialing to hear dialtone and other early media.
A PROGRESS "inband-information is now available" message is now sent after
the SETUP_ACKNOWLEDGE message for non-digital calls. An
AST_CONTROL_PROGRESS is now generated for incoming SETUP_ACKNOWLEDGE
messages for non-digital calls.
* Handling of the AST_CONTROL_CONGESTION in chan_dahdi/sig_pri was
inconsistent with the cause codes.
* Added better protection from sending out of sequence messages by
combining several flags into a single enum value representing call
progress level.
* Added diagnostic messages for deferred overlap digits handling corner
cases.
(closes issue #17085)
Reported by: shawkris
(closes issue #18509)
Reported by: wimpy
Patches:
issue18509_early_media_v1.8_v3.patch uploaded by rmudgett (license 664)
Expanded upon issue18509_early_media_v1.8_v3.patch to include analog
and SS7 because of backporting requirements.
Tested by: wimpy, rmudgett
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303772 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For each component, the set of valid BNF expansions defines exactly
which characters may appear unescaped. All other characters MUST be
escaped.
This patch modifies ast_uri_encode() to encode strings in line with this recommendation. This patch also adds an ast_escape_quoted() function which escapes '"' and '\' characters in quoted strings in accordance with section 25.1 of RFC 3261. The ast_uri_encode() function has also been modified to take an ast_flags struct describing the set of rules it should use when escaping characters to allow for it to escape SIP URIs in addition to HTTP URIs and other types of URIs or variations of those two URI types in the future.
The ast_uri_decode() function has also been modified to accept an ast_flags struct describing the set of rules to use when decoding to enable decoding '+' as ' ' in legacy http URLs.
The unit tests for these functions have also been updated.
ABE-2705
Review: https://reviewboard.asterisk.org/r/1081/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r302412 | seanbright | 2011-01-19 10:31:39 -0500 (Wed, 19 Jan 2011) | 10 lines
Use appropriate type for requested format in chan_local.
We were passing and storing the requested format as an int instead of format_t
resulting in truncation.
(closes issue #18238)
Reported by: whizemen
Patches:
0018238_speex16.patch uploaded by whizemen (license 1143)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r293493 | twilson | 2010-11-01 09:58:00 -0500 (Mon, 01 Nov 2010) | 14 lines
Only offer codecs both sides support for directmedia
When using directmedia, Asterisk needs to limit the codecs offered to just
the ones that both sides recognize, otherwise they may end up sending audio
that the other side doesn't understand.
(closes issue #17403)
Reported by: one47
Patches:
sip_codecs_simplified4 uploaded by one47 (license 23)
Tested by: one47, falves11
Review: https://reviewboard.asterisk.org/r/967/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@302048 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r301946 | rmudgett | 2011-01-14 15:09:57 -0600 (Fri, 14 Jan 2011) | 13 lines
Deadlock between dahdi_request() and pri_dchannel() processing an incomming call.
The sig_pri_new_ast_channel() is called with the channel private lock held
when pri_dchannel() calls it and no channel private lock held when
dahdi_request() calls it. The use of pri_grab() in
sig_pri_new_ast_channel() could leave the channel private lock held when
it returns if the lock was not held before calling it.
Make sig_pri_new_ast_channel() just lock the PRI span lock instead of
using pri_grab(). It is safe to do this because dahdi_request() does not
have the channel private lock and the deadlock potential with the PRI span
lock is only between pri_dchannel() and other threads.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@301947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r301790 | jpeeler | 2011-01-14 11:32:52 -0600 (Fri, 14 Jan 2011) | 42 lines
Resolve deadlock involving REFER.
Two fixes:
1) One must always have the private unlocked before calling
pbx_builtin_setvar_helper to not invalidate locking order since it locks the
channel.
2) Unlock the channel before calling pbx_find_extension, which starts and stops
autoservice during the lookup. The problem scenario as illustrated by the
reporter:
Thread: do_monitor
-----------------------
handle_request_do
handle_incoming
handle_request_refer
ast_parking_ext_valid
pbx_find_extension
ast_autoservice_stop
while (chan_list_state == as_chan_list_state) { usleep(1000); }
Thread: autoservice_run
-----------------------
autoservice_run
chan = ast_waitfor_n
ast_waitfor_nandfds
ast_waitfor_nandfds_classic / simple / complex (depending on your system)
ast_channel_lock(c[x]);
handle_request_do and schedule_process_request_queue locks the owner
if it exists. The autoservice thread is waiting for the channel lock, which
wasn't ever released since the do_monitor thread was waiting for autoservice
operations to complete. Solved by unlocking the channel but keeping a reference
to guarantee safety.
(closes issue #18403)
Reported by: jthurman
Patches:
20110103-blind_deadlock.diff uploaded by jthurman (license 614)
issue18403.patch uploaded by jpeeler (license 325)
Tested by: jthurman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@301791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r301134 | rmudgett | 2011-01-07 19:11:31 -0600 (Fri, 07 Jan 2011) | 7 lines
The DTMF attended transfer feature cannot callback a chan_dahdi BRI phone.
The DAHDI ISDN channel name is not dialable.
Make a channel name like DAHDI/i3/400-12 dialable when the sequence number
is stripped off of the name.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@301135 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r300714 | rmudgett | 2011-01-05 14:54:21 -0600 (Wed, 05 Jan 2011) | 21 lines
Merged revision 300711 from
https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
..........
r300711 | rmudgett | 2011-01-05 13:43:55 -0600 (Wed, 05 Jan 2011) | 14 lines
A call retrieved from hold may wind up with no audio.
If the retrieved call is natively bridged then the call may not have any
audio path. The following warning message is given:
"Failed to add <dfd> to conference <chan>/<chan>: Invalid argument".
* Open the media on a B channel when pri_fixup_principle() moves the call
from a no_b_channel channel to a real channel.
* Added lock protection while pri_fixup_principle() moves a call from one
private structure to another.
* Made some pri_fixup_principle() messages more meaningful.
..........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@300716 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r300301 | twilson | 2011-01-04 11:54:41 -0600 (Tue, 04 Jan 2011) | 29 lines
Merged revisions 300298 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r300298 | twilson | 2011-01-04 11:37:26 -0600 (Tue, 04 Jan 2011) | 22 lines
Merged revisions 300216 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r300216 | twilson | 2011-01-04 11:11:48 -0600 (Tue, 04 Jan 2011) | 15 lines
Don't authenticate SUBSCRIBE re-transmissions
This only skips authentication on retransmissions that are already
authenticated. A similar method is already used for INVITES. This
is the kind of thing we end up having to do when we don't have a
transaction layer...
(closes issue #18075)
Reported by: mdu113
Patches:
diff.txt uploaded by twilson (license 396)
Tested by: twilson, mdu113
Review: https://reviewboard.asterisk.org/r/1005/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@300302 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added the moh_signaling option to specify what to do when the channel's
bridged peer puts the ISDN channel on and off of hold.
Implemented as a FSM to control libpri ISDN signaling when the bridged
peer places the channel on and off of hold with the AST_CONTROL_HOLD and
AST_CONTROL_UNHOLD control frames.
JIRA SWP-2687
JIRA ABE-2691
Review: https://reviewboard.asterisk.org/r/1063/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@300212 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r299405 | rmudgett | 2010-12-21 20:10:39 -0600 (Tue, 21 Dec 2010) | 17 lines
Chan_dahdi sends an empty COLP on the bridged channel.
Chan_dahdi always inserts a connected party IE when you call from one
dahdi channel to another dahdi channel, even if no such information was
received on the 2nd channel. This clears the display of many phones.
* Removed leftover artifact from before the valid flag was added.
* Updated all of the channel's caller id information with the new
connected line information instead of just the string parts.
(closes issue #18508)
Reported by: wimpy
Patches:
issue18508_trunk.patch uploaded by rmudgett (license 664)
Tested by: wimpy, rmudgett
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299406 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r299353 | mnicholson | 2010-12-21 09:25:03 -0600 (Tue, 21 Dec 2010) | 30 lines
Merged revisions 299242 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r299242 | mnicholson | 2010-12-20 15:25:35 -0600 (Mon, 20 Dec 2010) | 23 lines
Merged revisions 299194,299198,299220 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r299194 | mnicholson | 2010-12-20 14:45:38 -0600 (Mon, 20 Dec 2010) | 6 lines
Respond as soon as possible with a 202 Accepted to refer requests.
This change also plugs a few memory leaks that can occur when parking sip calls.
ABE-2656
........
r299198 | mnicholson | 2010-12-20 15:00:44 -0600 (Mon, 20 Dec 2010) | 2 lines
Remove changes to via processing that were not supposed to go into the last commit.
........
r299220 | mnicholson | 2010-12-20 15:21:39 -0600 (Mon, 20 Dec 2010) | 4 lines
Use ast_free() instead of free()
ABE-2656
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299355 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r299248 | mmichelson | 2010-12-20 15:38:30 -0600 (Mon, 20 Dec 2010) | 20 lines
Fix a couple of CCSS issues.
* Make sure to allocate a cc_params structure
when creating autopeers.
* Use sip_uri_cmp when retrieving SIP CC agents
and monitors in case parameters appear in the
URI.
(closes issue #18504)
Reported by: kkm
(closes issue #18338)
Reported by: GeorgeKonopacki
Patches:
18338.diff uploaded by mmichelson (license 60)
Tested by: GeorgeKonopacki
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299249 65c4cc65-6c06-0410-ace0-fbb531ad65f3