Added option v(mailbox@[context]) which tells MeetMe where to look for a users greet file. If one does not exist it clears the v option and defers to the functionality of i/I as/if set by the MeetMe() command.
Review: https://reviewboard.asterisk.org/r/1009/
(closes issue #18297)
Reported by: parisioa
Patches:
meetme_final_patch_v.diff uploaded by parisioa (license 1153)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296249 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r296002 | russell | 2010-11-24 11:13:08 -0600 (Wed, 24 Nov 2010) | 52 lines
Merged revisions 296001 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r296001 | russell | 2010-11-24 11:03:16 -0600 (Wed, 24 Nov 2010) | 45 lines
Merged revisions 296000 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r296000 | russell | 2010-11-24 10:48:39 -0600 (Wed, 24 Nov 2010) | 38 lines
Handle failures building translation paths more effectively.
The problem scenario occurred on a heavily loaded system that was using the
codec_dahdi module and exceeded the hardware transcoding capacity. The failure
mode at that point was not good. The report came in to us as an Asterisk
lock-up. The "core show locks" shows a ton of threads locked up (but no
obvious deadlock). Upon deeper investigation, when the system is in this
state, the CPU was maxed out. The CPU was being consumed by the Asterisk
logger spewing messages on every audio frame for calls set up after transcoder
capacity was reached.
The purpose of this patch is to make Asterisk handle failures to create a
translation path in a more graceful manner. If we can't translate, then the
call just needs to be dropped, as it's not going to work. These are the
changes:
1) In set_format() of channel.c (which is called by set_read_format() and
set_write_format()), it was ignoring if ast_translator_build_path() failed and
returned NULL. It now pays attention to that case and returns a result
reflecting failure. With this change in place, the bridging code will
immediately detect a failure and end the bridge instead of proceeding to try to
bridge frames that can't be translated and making channel drivers freak out by
sending them frames in a format they weren't expecting.
2) In ast_indicate_data() of channel.c, failure of ast_playtones_start() was
ignored. It is now reflected in the return value of the function. This didn't
turn out to have any affect on the bug, but seemed like a good change to leave
in.
3) In app_dial(), when only sending a call to a single endpoint, it will
attempt to do some bridging of its own of early audio. It uses
make_compatible() when it's going to do this. However, it ignored failure from
make compatible. So, even with the fix from #1, if there was early audio going
through app_dial, there would still be a period of invalid frames passing
through. After detecting failure here, Dial() exits.
ABE-2658
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296034 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r295866 | rmudgett | 2010-11-22 13:36:10 -0600 (Mon, 22 Nov 2010) | 60 lines
Merged revisions 295843 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r295843 | rmudgett | 2010-11-22 13:28:23 -0600 (Mon, 22 Nov 2010) | 53 lines
Merged revisions 295790 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r295790 | rmudgett | 2010-11-22 12:46:26 -0600 (Mon, 22 Nov 2010) | 46 lines
The channel redirect function (CLI or AMI) hangs up the call instead of redirecting the call.
To recreate the problem:
1) Party A calls Party B
2) Invoke CLI "channel redirect" command to redirect channel call leg
associated with A.
3) All associated channels are hung up.
Note that if the CLI command were done on the channel call leg associated
with B it works.
This regression was a result of the fix for issue #16946
(https://reviewboard.asterisk.org/r/740/).
The regression affects all features that use an async goto to execute the
dialplan because of an external event: Channel redirect, AMI redirect, SIP
REFER, and FAX detection.
The struct ast_channel._softhangup code is a mess. The variable is used
for several purposes that do not necessarily result in the call being hung
up. I have added doxygen comments to describe how the various _softhangup
bits are used. I have corrected all the places where the variable was
tested in a non-bit oriented manner.
The primary fix is the new AST_CONTROL_END_OF_Q frame. It acts as a weak
hangup request so the soft hangup requests that do not normally result in
a hangup do not hangup.
JIRA SWP-2470
JIRA SWP-2489
(closes issue #18171)
Reported by: SantaFox
(closes issue #18185)
Reported by: kwemheuer
(closes issue #18211)
Reported by: zahir_koradia
(closes issue #18230)
Reported by: vmarrone
(closes issue #18299)
Reported by: mbrevda
(closes issue #18322)
Reported by: nerbos
Review: https://reviewboard.asterisk.org/r/1013/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@295867 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r294905 | jpeeler | 2010-11-12 14:52:06 -0600 (Fri, 12 Nov 2010) | 30 lines
Merged revisions 294904 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r294904 | jpeeler | 2010-11-12 14:51:15 -0600 (Fri, 12 Nov 2010) | 23 lines
Merged revisions 294903 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r294903 | jpeeler | 2010-11-12 14:49:09 -0600 (Fri, 12 Nov 2010) | 16 lines
Fix regression causing abort in voicemail after opening a mailbox with no mesgs.
In order to be more safe, some error handling code was changed to respect more
error conditions including the potential memory allocation failure for deleted
and heard message tracking introduced in 293004. However, last_message_index
returns -1 for zero messages (perhaps as expected) and was triggering the
stricter error checking. Because last_message_index is only called directly
in one place, just return 0 from open_mailbox (for file based storage) when no
messages are detected unless a real error has occurred.
(closes issue #18240)
Reported by: leobrown
Patches:
bug18240.1-6-2.diff.txt uploaded by alecdavis (license 585)
Tested by: pabelanger
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294907 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r293119 | jpeeler | 2010-10-26 13:49:08 -0500 (Tue, 26 Oct 2010) | 43 lines
Merged revisions 293118 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r293118 | jpeeler | 2010-10-26 13:33:24 -0500 (Tue, 26 Oct 2010) | 36 lines
Merged revisions 293004 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r293004 | jpeeler | 2010-10-25 17:55:28 -0500 (Mon, 25 Oct 2010) | 29 lines
Fix inprocess_container in voicemail to correctly restrict max messages.
The comparison function logic was off, so the number of sessions for a given
mailbox were not being incremented properly. This problem caused the maximum
number of messages per folder to not be respected when simultaneously leaving
multiple voicemails just below the threshold.
These problems should be fixed by the above, but just in case:
Fixed resequence_mailbox to rely on the actual number of detected number of
files in a directory rather than just assuming only 10 messages more than the
maximum had been left. Also if more messages than the maximum are deleted they
are actually removed now.
The second purpose of this commit should have been separated out probably, but
is related to the above. Again, if the number of messages in a given voicemail
folder exceeds the maximum set limit make sure to allocate enough space for the
deleted and heard index tracking array.
A few random fixes:
There was a forgotten decrement of the inprocess count in imap_store_file.
When using IMAP storage, do not look in the directory where file based storage
messages may still reside and influence the message count.
Ensure to use only the first format in sendmail.
ABE-2516
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@293120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r292227 | jpeeler | 2010-10-18 16:55:46 -0500 (Mon, 18 Oct 2010) | 25 lines
Merged revisions 292226 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r292226 | jpeeler | 2010-10-18 16:54:38 -0500 (Mon, 18 Oct 2010) | 18 lines
Merged revisions 292223 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r292223 | jpeeler | 2010-10-18 16:50:30 -0500 (Mon, 18 Oct 2010) | 11 lines
Fix improper operator key acceptance and clean up temp recording files.
This is a fix for when pressing the operator key after recording an unavailable,
busy, name, or temporary message in mailbox options. The operator key should not
be accepted here, but should be allowed during the message recording. If the
operator key is pressed during ensure the file is saved or deleted as
apporopriate. Also, ensure removal of temporary recorded files after an early
hang up or when message acceptance confirmation times out.
ABE-2518
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292228 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add the extension and context of the calling channel to the log output if a macro could not be found.
(closes issue #18112)
Reported by: prado
Patches:
app_macro-info.diff uploaded by prado (license 510)
Tested by: schmidts
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r289426 | russell | 2010-09-30 10:39:45 -0500 (Thu, 30 Sep 2010) | 22 lines
Merged revisions 289425 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r289425 | russell | 2010-09-30 10:37:29 -0500 (Thu, 30 Sep 2010) | 15 lines
Merged revisions 289424 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r289424 | russell | 2010-09-30 10:34:29 -0500 (Thu, 30 Sep 2010) | 8 lines
Fix a crash in app_sms.
Since the data being passed to the generator callback is on the stack of the
SMS() application, we must ensure that the generator is stopped before the
application exits.
ABE-2587
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@289427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r288079 | rmudgett | 2010-09-21 15:29:51 -0500 (Tue, 21 Sep 2010) | 2 lines
Protect channel access in CONNECTED_LINE and REDIRECTING interception macro launch code.
........
r288080 | rmudgett | 2010-09-21 15:29:59 -0500 (Tue, 21 Sep 2010) | 8 lines
Simplify locking code for REDIRECTING interception macro when forwarding a call.
Simplified the locking code by using a local copy of the redirecting party
information in app_dial.c:do_forward() and app_queue.c:wait_for_answer()
for launching the REDIRECTING interception macro when a call is forwarded.
Reduced the lock time of the 'o->chan' and 'in' channels.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@288081 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r287760 | bbryant | 2010-09-20 20:00:23 -0400 (Mon, 20 Sep 2010) | 30 lines
Merged revisions 287759 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r287759 | bbryant | 2010-09-20 19:58:26 -0400 (Mon, 20 Sep 2010) | 23 lines
Merged revisions 287758 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r287758 | bbryant | 2010-09-20 19:57:08 -0400 (Mon, 20 Sep 2010) | 16 lines
Fix misvalidation of meetme pins in conjunction with the 'a' MeetMe flag.
When using the 'a' MeetMe flag and having a user and admin pin setup for your
conference, using the user pin would gain you admin priviledges. Also, when no
user pin was set, an admin pin was, the 'a' MeetMe flag wasn't used, and the
user tried to enter a conference then they were still prompted for a pin and
forced to hit #.
(closes issue #17908)
Reported by: kuj
Patches:
pins_2.patch uploaded by kuj (license 1111)
Tested by: kuj
Review: [full review board URL with trailing slash]
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@287763 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r287015 | jpeeler | 2010-09-15 15:32:52 -0500 (Wed, 15 Sep 2010) | 21 lines
Merged revisions 286998 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r286998 | jpeeler | 2010-09-15 15:28:02 -0500 (Wed, 15 Sep 2010) | 14 lines
Merged revisions 286941 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r286941 | jpeeler | 2010-09-15 15:08:52 -0500 (Wed, 15 Sep 2010) | 7 lines
Ensure mailbox is not filled to capacity before doing message forwarding.
Specifically, before prompting to record a prepended message the capacity is
checked first. If the mailbox is full the extension will be reprompted.
ABE-2517
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@287016 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r285533 | bbryant | 2010-09-08 16:58:43 -0400 (Wed, 08 Sep 2010) | 15 lines
Merged revisions 285532 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r285532 | bbryant | 2010-09-08 16:56:12 -0400 (Wed, 08 Sep 2010) | 8 lines
Fixes a bug with MeetMe where after announcing the amount of time left in a conference, if music on hold was playing, it doesn't restart.
(closes issue #17408)
Reported by: sysreq
Patches:
asterisk-issue-17408_fixed.patch uploaded by sysreq (license 1009)
Tested by: sysreq
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@285534 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r284281 | tilghman | 2010-08-30 17:28:47 -0500 (Mon, 30 Aug 2010) | 18 lines
Merged revisions 284280 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r284280 | tilghman | 2010-08-30 17:27:06 -0500 (Mon, 30 Aug 2010) | 11 lines
Fix 3 coding errors:
1) After we close FD, we should not be trying to write to it.
2) Call _exit(0), not exit(0), to avoid running shutdown routines in a child.
3) Use endian, not processor, detection to ensure bytes are written in the correct order.
(closes issue #15706)
Reported by: modelnine
Patches:
asterisk-1.6.1.1-festival-debug.patch uploaded by modelnine (license 865)
Tested by: gmartinez
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@284282 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r279227 | rmudgett | 2010-07-23 17:20:47 -0500 (Fri, 23 Jul 2010) | 21 lines
Merged revisions 279207 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r279207 | rmudgett | 2010-07-23 17:11:23 -0500 (Fri, 23 Jul 2010) | 14 lines
Merged revisions 279206 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r279206 | rmudgett | 2010-07-23 16:56:44 -0500 (Fri, 23 Jul 2010) | 7 lines
SIP promiscuous redirect could fail to dial the redirect.
The ast_channel was created with one variable to ast_request() but the
call to ast_call() that initiates the outgoing call was using a different
variable. The two variables are not equivalent if the call_forward string
included a channel technology specifier. e.g., SIP/200
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@279245 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also, parse the useropts properly, when retrieving from realtime, and add them
to the existing flags.
(closes issue #17502)
Reported by: kenji
Patches:
20100720__issue17502.diff.txt uploaded by tilghman (license 14)
Tested by: kenji
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278463 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Just say the number of seconds (after minutes) rather than doing some incorrect
calculation with respect to minutes.
(closes issue #17498)
Reported by: corruptor
Patches:
holdesecs_bug.diff uploaded by corruptor (license 253)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277182 | pabelanger | 2010-07-16 13:10:36 -0400 (Fri, 16 Jul 2010) | 8 lines
Total analysis time error with SIP and silence suppression
When using app_amd with SIP providers that have silence
suppression on, the iTotalTime count increases exponentially.
(closes issue #17656)
Reported by: juls
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277183 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The purpose of this patch is to eliminate struct ast_callerid since it has
turned into a miscellaneous collection of various party information.
Eliminate struct ast_callerid and replace it with the following struct
organization:
struct ast_party_name {
char *str;
int char_set;
int presentation;
unsigned char valid;
};
struct ast_party_number {
char *str;
int plan;
int presentation;
unsigned char valid;
};
struct ast_party_subaddress {
char *str;
int type;
unsigned char odd_even_indicator;
unsigned char valid;
};
struct ast_party_id {
struct ast_party_name name;
struct ast_party_number number;
struct ast_party_subaddress subaddress;
char *tag;
};
struct ast_party_dialed {
struct {
char *str;
int plan;
} number;
struct ast_party_subaddress subaddress;
int transit_network_select;
};
struct ast_party_caller {
struct ast_party_id id;
char *ani;
int ani2;
};
The new organization adds some new information as well.
* The party name and number now have their own presentation value that can
be manipulated independently. ISDN supplies the presentation value for
the name and number at different times with the possibility that they
could be different.
* The party name and number now have a valid flag. Before this change the
name or number string could be empty if the presentation were restricted.
Most channel drivers assume that the name or number is then simply not
available instead of indicating that the name or number was restricted.
* The party name now has a character set value. SIP and Q.SIG have the
ability to indicate what character set a name string is using so it could
be presented properly.
* The dialed party now has a numbering plan value that could be useful to
have available.
The various channel drivers will need to be updated to support the new
core features as needed. They have simply been converted to supply
current functionality at this time.
The following items of note were either corrected or enhanced:
* The CONNECTEDLINE() and REDIRECTING() dialplan functions were
consolidated into func_callerid.c to share party id handling code.
* CALLERPRES() is now deprecated because the name and number have their
own presentation values.
* Fixed app_alarmreceiver.c write_metadata(). The workstring[] could
contain garbage. It also can only contain the caller id number so using
ast_callerid_parse() on it is silly. There was also a typo in the
CALLERNAME if test.
* Fixed app_rpt.c using ast_callerid_parse() on the channel's caller id
number string. ast_callerid_parse() alters the given buffer which in this
case is the channel's caller id number string. Then using
ast_shrink_phone_number() could alter it even more.
* Fixed caller ID name and number memory leak in chan_usbradio.c.
* Fixed uninitialized char arrays cid_num[] and cid_name[] in
sig_analog.c.
* Protected access to a caller channel with lock in chan_sip.c.
* Clarified intent of code in app_meetme.c sla_ring_station() and
dial_trunk(). Also made save all caller ID data instead of just the name
and number strings.
* Simplified cdr.c set_one_cid(). It hand coded the ast_callerid_merge()
function.
* Corrected some weirdness with app_privacy.c's use of caller
presentation.
Review: https://reviewboard.asterisk.org/r/702/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r275773 | jpeeler | 2010-07-12 15:34:51 -0500 (Mon, 12 Jul 2010) | 12 lines
Make user removals and traversals thread safe in meetme.
Race conditions present in meetme involving the user list where a lack of
locking has the potential for a user to be removed during a traversal or as in
the case of the reporter after checking if the list is empty could cause a
crash. Fixing this was done by convering the userlist to an ao2 container.
(closes issue #17390)
Reported by: Vince
Review: https://reviewboard.asterisk.org/r/746/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276074 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a generic API for accommodating IPv6 and IPv4 addresses
within Asterisk. While many files have been updated to make use of the
API, chan_sip and the RTP code are the files which actually support
IPv6 addresses at the time of this commit. The way has been paved for
easier upgrading for other files in the near future, though.
Big thanks go to Simon Perrault, Marc Blanchet, and Jean-Philippe Dionne
for their hard work on this.
(closes issue #17565)
Reported by: russell
Patches:
asteriskv6-test-report.pdf uploaded by russell (license 2)
Review: https://reviewboard.asterisk.org/r/743
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r273474 | jpeeler | 2010-07-01 15:19:16 -0500 (Thu, 01 Jul 2010) | 14 lines
Allow admin user to join conference without using admin mode and no user pin.
Configuring the conference in meetme.conf like the following:
conf => 2345,,6666
did not prompt for pin when used without admin mode. This meant that the
conference could not be joined as an admin even if the user knew the correct
pin. The original bug report was submitted claiming that the blank user pin
should deny entry into the conference. I think a better way to handle this
would be with a feature enhancement that used the following syntax:
conf => 2345,X,6666 - where X denotes no acceptable pin allowed
(closes issue #15704)
Reported by: modelnine
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@273522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r273354 | jpeeler | 2010-07-01 10:05:43 -0500 (Thu, 01 Jul 2010) | 12 lines
Ensure channel placed in meetme in ringing state is properly hung up.
An outgoing channel placed in meetme while still ringing which was then hung up
would not exit meetme and the channel was not properly destroyed. Specifically
checking for this scenario by looking at the appropriate control frames resolves
the issue.
(closes issue #15871)
Reported by: Ivan
Patches:
meetme_congestion_trunk_v2.patch uploaded by Ivan (license 229)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@273355 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
This version of the patch only adds AgentComplete for attended transfers. It was already present for blind transfers.
........
r272367 | mnicholson | 2010-06-23 17:33:51 -0500 (Wed, 23 Jun 2010) | 8 lines
Send AgentComplete manager events in the event of blind and attended transfers.
(closes issue #16819)
Reported by: elbriga
Patches:
app_queue.diff uploaded by elbriga (license 482)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272368 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r272255 | pabelanger | 2010-06-23 16:57:01 -0400 (Wed, 23 Jun 2010) | 12 lines
First caller into a dynamic conference now enter pin once.
If MeetMe is configured to use dynamic conference
numbers, then the first caller (which creates the
conference) had to enter the PIN number twice.
(closes issue #15878)
Reported by: shawkris
Patches:
issue15878.patch uploaded by pabelanger (license 224)
Tested by: pabelanger
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272257 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Even if there are no stations or trunks defined, we need to start the sla
thread to make sure we get the reload event. Also, when doing a reload we need
to remove the existing trunks and stations or they end up hanging around.
(closes issue #16818)
Reported by: mbonin
Patches:
sla_reload.patch uploaded by twilson (license 396)
Tested by: twilson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272109 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk Generic AOC Representation
- Generic AOC encode/decode routines.
(Generic AOC must be encoded to be passed on the wire in the AST_CONTROL_AOC frame)
- AST_CONTROL_AOC frame type to represent generic encoded AOC data
- Manager events for AOC-S, AOC-D, and AOC-E messages
Asterisk App Support
- app_dial AOC-S pass-through support on call setup
- app_queue AOC-S pass-through support on call setup
AOC Unit Tests
- AOC Unit Tests for encode/decode routines
- AOC Unit Test for manager event representation.
SIP AOC Support
- Pass-through of generic AOC-D and AOC-E messages to snom phones via the
snom AOC specification.
- Creation of chan_sip page3 flags for the addition of the new
'snom_aoc_enabled' sip.conf option.
IAX AOC Support
- Natively supports AOC pass-through through the use of the new
AST_CONTROL_AOC frame type
DAHDI AOC Support
- ETSI PRI full AOC Pass-through support
- 'aoc_enable' chan_dahdi.conf option for independently enabling
pass-through of AOC-S, AOC-D, AOC-E.
- 'aoce_delayhangup' option for retrieving AOC-E on disconnect.
- DAHDI A() dial string option for requesting AOC services.
example usage:
;requests AOC-S, AOC-D, and AOC-E on call setup
exten=>1111,1,Dial(DAHDI/g1/1112/A(s,d,e))
Review: https://reviewboard.asterisk.org/r/552/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267096 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Patch supplied by reporter was modified to use autoservice and
prevent a potential channel ref leak but is otherwise as the
reporter uploaded it.
(closes issue #17182)
Reported by: rcasas
Patches:
app_senddtmf.c.patch_trunk uploaded by rcasas (license 641)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265453 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r265089 | mmichelson | 2010-05-21 15:59:14 -0500 (Fri, 21 May 2010) | 8 lines
Don't hang up on a queue caller if the file we attempt to play does not exist.
This also fixes a documentation mistake in file.h that made my original attempt
to correct this problem not work correctly.
(closes issue #17061)
Reported by: RoadKill
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265090 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The connected line update macro would not get run if the connected line
number string was empty. The number could be empty if the connected line
update did not update a number but the name. It should be run if there
was an AST_CONTROL_CONNECTED_LINE frame received for pending dials and
queues.
Renamed and added some more comments for some confusing identifiers
directly connected to the related code.
Also fixed a memory leak in app_queue.
Review: https://reviewboard.asterisk.org/r/669/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264669 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r263769 | jpeeler | 2010-05-18 13:54:58 -0500 (Tue, 18 May 2010) | 10 lines
Modify directory name reading to be interrupted with operator or pound escape.
In the case of accidentally entering the wrong first three letters for the
reading, users could be very frustrated if the name listing is very long. This
allows interrupting the reading by pressing 0 or #. 0 will attempt to execute
a configured operator (o) extension and # will exit and proceed in the
dialplan.
ABE-2200
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From reviewboard:
Digium has a commercial customer who has made extensive use of the connected party and
redirecting information present in later versions of Asterisk Business Edition and which
is to be in the upcoming 1.8 release. Through their use of the feature, new problems and solutions
have come about. This patch adds several enhancements to maximize usage of the connected party
and redirecting information functionality.
First, Asterisk trunk already had connected line interception macros. These macros allow you to
manipulate connected line information before it was sent out to its target. This patch adds the
same feature except for redirecting information instead.
Second, the ast_callerid and ast_party_id structures have been enhanced to provide a "tag." This
tag can be set with func_callerid, func_connectedline, func_redirecting, and in the case of DAHDI,
mISDN, and SIP channels, can be set in a configuration file. The idea behind the callerid tag is
that it can be set to whatever value the administrator likes. Later, when running connected line
and redirecting macros, the admin can read the tag off the appropriate structure to determine what
action to take. You can think of this sort of like a channel variable, except that instead of having
the variable associated with a channel, the variable is associated with a specific identity within
Asterisk.
Third, app_dial has two new options, s and u. The s option lets a dialplan writer force a specific
caller ID tag to be placed on the outgoing channel. The u option allows the dialplan writer to force
a specific calling presentation value on the outgoing channel.
Fourth, there is a new control frame subclass called AST_CONTROL_READ_ACTION added. This was added
to correct a very specific situation. In the case of SIP semi-attended (blond) transfers, the party
being transferred would not have the opportunity to run a connected line interception macro to
possibly alter the transfer target's connected line information. The issue here was that during a
blond transfer, the SIP transfer code has no bridged channel on which to queue the connected line
update. The way this was corrected was to add this new control frame subclass. Now, we queue an
AST_CONTROL_READ_ACTION frame on the channel on which the connected line interception macro should
be run. When ast_read is called to read the frame, ast_read responds by calling a callback function
associated with the specific read action the control frame describes. In this case, the action taken
is to run the connected line interception macro on the transferee's channel.
Review: https://reviewboard.asterisk.org/r/652/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263541 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r262662 | dvossel | 2010-05-12 12:00:04 -0500 (Wed, 12 May 2010) | 11 lines
fixes app_meetme dsp error
We attempted to detect silence after translating a frame
from signed linear. This caused a flooding of errors. To
resolve this the code to detect silence was moved before the
translation.
(closes issue #17133)
Reported by: jsdyer
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@262744 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Where a site uses VoicemailMain(mailbox) the users have to be at their own extension to clear
their voicemail, they have no way of escaping VoicemailMain to allow entry of new boxnumber.
This patch, allows a site to include to 'a' priority in the VoicemailMain context, to allow an escape.
If the 'a' priority doesn't exist in the context that VoicemailMain was called from then it acts as the old behaviour.
Reported by: alecdavis
Tested by: alecdavis
Patch
vm_a_extension.diff2.txt uploaded by alecdavis (license 585)
Review: https://reviewboard.asterisk.org/r/489/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@262005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r261735 | jpeeler | 2010-05-06 15:10:59 -0500 (Thu, 06 May 2010) | 8 lines
Only allow the operator key to be accepted after leaving a voicemail.
Or rather disallow the operator key from being accepted when not offered,
such as after finishing a recording from within the mailbox options menu.
ABE-2121
SWP-1267
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@261736 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r260923 | jpeeler | 2010-05-04 13:46:46 -0500 (Tue, 04 May 2010) | 12 lines
Voicemail transfer to operator should occur immediately, not after main menu.
There were two scenarios in the advanced options that while using the
operator=yes and review=yes options, the transfer occurred only after exiting
the main menu (after sending a reply or leaving a message for an extension).
Now after the audio is processed for the reply or message the transfer occurs
immediately as expected.
ABE-2107
ABE-2108
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@260924 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the following in-conference admin DTMF features:
*81 - Roll call (or simply user count if INTROUSER isn't enabled)
*82 - Eject all non-admins
*83 - Mute/unmute all non-admins
*84 - Start recording the conference on the fly
FWIW, this code uses newly recorded prompts.
(closes issue #16379)
Reported by: rfinnie
Patches:
meetme-enhancements-232771-v1.patch uploaded by rfinnie (license 940)
modified slightly by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@260757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a specific position is specified for the queue, the idea
was that the caller cannot be placed ahead of higher-priority
callers. Unfortunately, the logic was reversed so that the caller
could ONLY be placed ahead of higher priority callers.
Discovered while writing a unit test.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@260344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This module implements an abstraction for retrieving and exporting
asterisk data.
Developed by:
Brett Bryant <brettbryant@gmail.com>
Eliel C. Sardanons (LU1ALY) <eliels@gmail.com>
For the Google Summer of code 2009 Project.
Documentation can be found in doxygen format and inside the
header include/asterisk/data.h
Review: https://reviewboard.asterisk.org/r/275/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258517 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r258432 | jpeeler | 2010-04-21 16:45:36 -0500 (Wed, 21 Apr 2010) | 8 lines
Fix looping forever when no input received in certain voicemail menu scenarios.
Specifically, prompting for an extension (when leaving or forwarding a message)
or when prompting for a digit (when saving a message or changing folders).
ABE-2122
SWP-1268
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258433 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added a new manager command to mute/unmute MixMonitor audio on a channel.
Added a new feature to audiohooks so that you can mute either read / write
(or both) types of frames - this allows for MixMonitor to mute either side
of the conversation without affecting the conversation itself.
(closes issue #16740)
Reported by: jmls
Review: https://reviewboard.asterisk.org/r/487/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r258029 | jpeeler | 2010-04-20 11:16:33 -0500 (Tue, 20 Apr 2010) | 11 lines
Play correct prompt when voicemail store failure occurs after attempted forward.
If a user's mailbox was full and a message was attempted to be forwarded to
said box, warnings on the console would indicate failure. However, the played
prompt was that of success (vm-msgsaved). Now storage failure is taken into
account and the correct prompt (vm-mailboxfull) is played when appropriate.
ABE-2123
SWP-1262
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258065 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r257686 | dhubbard | 2010-04-16 16:15:43 -0500 (Fri, 16 Apr 2010) | 21 lines
Make the mixmonitor thread process audio frames faster
Mantis issue 17078 reports MixMonitor recordings have shorter durations than
the call duration. This was because the mixmonitor thread was not processing
frames from the audiohook fast enough. The mixmonitor thread would slowly fall
behind the most recent audio frame and when the channel hangs up, the mixmonitor
thread would exit without processing the same number of frames as the channel;
leaving the mixmonitor recording shorter than actual call duration.
This revision fixes this issue by moving the ast_audiohook_trigger_wait() and
the subsequent audiohook.status check into the block where the
ast_audiohook_read_frame() function returns NULL.
(closes issue #17078)
Reported by: geoff2010
Patches:
dw-M17078.patch uploaded by dhubbard (license 733)
Tested by: dhubbard, geoff2010
Review: https://reviewboard.asterisk.org/r/611/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@257713 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From Reviewboard:
CCSS stands for Call Completion Supplementary Services. An admittedly out-of-date
overview of the architecture can be found in the file doc/CCSS_architecture.pdf
in the CCSS branch. Off the top of my head, the big differences between what is
implemented and what is in the document are as follows:
1. We did not end up modifying the Hangup application at all.
2. The document states that a single call completion monitor may be used across
multiple calls to the same device. This proved to not be such a good idea
when implementing protocol-specific monitors, and so we ended up using one
monitor per-device per-call.
3. There are some configuration options which were conceived after the document
was written. These are documented in the ccss.conf.sample that is on this
review request.
For some basic understanding of terminology used throughout this code, see the
ccss.tex document that is on this review.
This implements CCBS and CCNR in several flavors.
First up is a "generic" implementation, which can work over any channel technology
provided that the channel technology can accurately report device state. Call
completion is requested using the dialplan application CallCompletionRequest and can
be canceled using CallCompletionCancel. Device state subscriptions are used in order
to monitor the state of called parties.
Next, there is a SIP-specific implementation of call completion. This method uses the
methods outlined in draft-ietf-bliss-call-completion-06 to implement call completion
using SIP signaling. There are a few things to note here:
* The agent/monitor terminology used throughout Asterisk sometimes is the reverse of
what is defined in the referenced draft.
* Implementation of the draft required support for SIP PUBLISH. I attempted to write
this in a generic-enough fashion such that if someone were to want to write PUBLISH
support for other event packages, such as dialog-state or presence, most of the effort
would be in writing callbacks specific to the event package.
* A subportion of supporting PUBLISH reception was that we had to implement a PIDF
parser. The PIDF support added is a bit minimal. I first wrote a validation
routine to ensure that the PIDF document is formatted properly. The rest of the
PIDF reading is done in-line in the call-completion-specific PUBLISH-handling
code. In other words, while there is PIDF support here, it is not in any state
where it could easily be applied to other event packages as is.
Finally, there are a variety of ISDN-related call completion protocols supported. These
were written by Richard Mudgett, and as such I can't really say much about their
implementation. There are notes in the CHANGES file that indicate the ISDN protocols
over which call completion is supported.
Review: https://reviewboard.asterisk.org/r/523
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix app_dial.c:do_forward() OPT_FORCECLID setting cid.cid_num with a stack
allocated string instead of a heap allocated string.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256103 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some platforms prefix externally-visible symbols in object files generated
from C sources (most commonly, '_' is the prefix). On these platforms,
the existing symbol export filtering process ends up suppressing all the symbols
that are supposed to be left visible. This patch allows the prefix string
to be supplied to the top-level Makefile in the LINKER_SYMBOL_PREFIX variable,
and then generates the linker scripts as required to include the prefix
supplied.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@255906 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r255591 | tilghman | 2010-03-31 14:09:46 -0500 (Wed, 31 Mar 2010) | 15 lines
Ensure line terminators in email are consistent.
Fixes an issue with certain Mail Transport Agents, where attachments are not
interpreted correctly.
(closes issue #16557)
Reported by: jcovert
Patches:
20100308__issue16557__1.4.diff.txt uploaded by tilghman (license 14)
20100308__issue16557__1.6.0.diff.txt uploaded by tilghman (license 14)
20100308__issue16557__trunk.diff.txt uploaded by tilghman (license 14)
Tested by: ebroad, zktech
Reviewboard: https://reviewboard.asterisk.org/r/544/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@255592 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously only configurable globally. A unit test has also been written to
provide protection against parse failures for supported mailbox options.
(closes issue #16864)
Reported by: kobaz
Patches:
voicemail2.patch uploaded by kobaz (license 834)
Review: https://reviewboard.asterisk.org/r/555/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@254321 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Change the example usage of pipe as a separator to comma in the UserEvent
documentation.
(closes issue #16961)
Reported by: jlpedrosa
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@253345 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For some reason the documentation for the 'k' application in trunk
and 1.6.2 is different than 1.6.0 and 1.6.1, so I'm setting them all
to match. The wording in 1.6.2 and trunk was ambiguous, so you could
interpret the wording the mean that recording would continue upon hangup
indefinitely, or you could interpret it to mean that the recorded
data would not be discarded upon hangup. This change makes it clear
we mean the latter, and not the former.
Came from a discussion in #asterisk on IRC.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251680 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Only chan_dahdi set a value in cdrflags. Everyone else just copied it
around the system. Noone cared about any value it may have contained.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250565 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The 'p' option allows the PickupChan app to pickup
a ringing phone by looking for the first match to a
partial channel name rather than requiring a full match.
(closes issue #16613)
Reported by: syspert
Patches:
pickipbycallid.patch uploaded by syspert (license 938)
pickupbycallerid_v2.patch uploaded by dvossel (license 671)
Tested by: dvossel, syspert
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250141 65c4cc65-6c06-0410-ace0-fbb531ad65f3
VMSayName that will play the recorded name of the voicemail user if it exists,
otherwise will play the mailbox number. A unit test has been written to verify
correct functionality called test_voicemail_vmsayname.
(closes issue #14973)
Reported by: ghjm
Review: https://reviewboard.asterisk.org/r/530/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@249889 65c4cc65-6c06-0410-ace0-fbb531ad65f3
when called from a ISDN channel, null frames prevent '#' exit.
Now only echo back VOICE and DTMF frames
(issue #16880)
Reported by: alecdavis
Patches:
echo_exit.diff.txt uploaded by alecdavis (license 585)
Tested by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@249801 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r249671 | seanbright | 2010-03-01 14:35:01 -0500 (Mon, 01 Mar 2010) | 11 lines
Fix crash in app_voicemail related to message counting.
We were passing a 'struct inprocess **' and treating it like a 'struct inprocess *'
causing a segfault.
(closes issue #16921)
Reported by: whardier
Patches:
20100301_issue16921.patch uploaded by seanbright (license 71)
Tested by: whardier
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@249672 65c4cc65-6c06-0410-ace0-fbb531ad65f3
previous test, gave false level of assurance that code was healthy.
(issue #16927)
Reported by: alecdavis
Patches:
based on app_voicemail_test.diff.txt uploaded by alecdavis (license 585)
Tested by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@249449 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Urgent voicemails were not attached, because the attachment code looked in the wrong folder.
- Urgent voicemails were sometimes counted twice when displaying the count of new messages.
- Backends were inconsistent as to which voicemails each API counted.
- Unit tests added to verify behavior in the future.
(closes issue #15654)
Reported by: tomo1657
Patches:
20100225__issue15654.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
(closes issue #16448)
Reported by: hevad
Review: https://reviewboard.asterisk.org/r/525/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@249187 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change builds upon the recent change to menuselect to add 'touch_on_change'
as an attribute of both categories and members. This should allow only the most
invasive defines to cause a complete rebuild, while defines which only affect a
subset of modules will only cause a rebuild of that smaller set.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246789 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After further discussion with Steve Underwood, we should not (yet) be offering
to receive MMR or JBIG transcoded streams from T.38 endpoints. A future spandsp
release will support those features, and then they can be enabled during
negotiation
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245680 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, we would parse GOSUB_RESULT, but not actually do anything with it.
Also, allow GOSUB_RETVAL to be inherited back across a peer/master channel.
(closes issue #16687)
Reported by: bklang
Patches:
app_dial-preserve-gosub_retval.patch uploaded by bklang (license 919)
(with modifications)
(closes issue #16686)
Reported by: bklang
Patches:
app_dial-respect-gosub_result.patch uploaded by bklang (license 919)
(with modifications)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@244393 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add file information to data element of T event so
the file information is sent to the client when it is
interrupted. Previously only notification of pending
files that were dropped was sent
(closes issue #16147)
Reported by: thedavidfactor
Tested by: thedavidfactor
Review: https://reviewboard.asterisk.org/r/449/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@240969 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r240414 | tilghman | 2010-01-15 14:52:27 -0600 (Fri, 15 Jan 2010) | 15 lines
Disallow leaving more than maxmsg voicemails.
This is a possibility because our previous method assumed that no messages are
left in parallel, which is not a safe assumption. Due to the vmu structure
duplication, it was necessary to track in-process messages via a separate
structure. If at some point, we switch vmu to an ao2-reference-counted
structure, which would eliminate the prior noted duplication of structures,
then we could incorporate this new in-process structure directly into vmu.
(closes issue #16271)
Reported by: sohosys
Patches:
20100108__issue16271.diff.txt uploaded by tilghman (license 14)
20100108__issue16271__trunk.diff.txt uploaded by tilghman (license 14)
20100108__issue16271__1.6.0.diff.txt uploaded by tilghman (license 14)
Tested by: jsutton
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@240415 65c4cc65-6c06-0410-ace0-fbb531ad65f3
asterisk.conf's 'transmit_silence' option existed before
this patch, but was limited to only generating silence
while recording and sending DTMF. Now enabling the
transmit_silence option generates silence during wait
times as well.
To achieve this, ast_safe_sleep has been modified to
generate silence anytime no other generators are present
and transmit_silence is enabled. Wait apps not using
ast_safe_sleep now generate silence when transmit_silence
is enabled as well.
(closes issue #16524)
Reported by: kobaz
(closes issue #16523)
Reported by: kobaz
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/456/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239712 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When reporting hold time, the number of seconds should be mod 60.
Otherwise audio playback could be something like "2 minutes 123 seconds"
rather than "2 minutes 3 seconds".
Also, the "minute" sound file is missing, so for the moment until
that file can be created the "minutes" file is used instead.
(closes issue #16168)
Reported by: nickilo
Patches:
patch-unified-trunk-rev-222176 uploaded by nickilo (license )
Tested by: nickilo, wonderg
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@237920 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Part of the work done for connected line was to add an optional
argument to the 'f' option to allow for the connected party information
of the outgoing channel to be set to the argument provided. This was
overlooked during the merge of the work to trunk and is being added
back now. The CHANGES file has also been updated to note this change.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@237803 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also add an XXX comment that I'm baffled nobody has ever complained about. We
say "first message", and then we go into language-specific stuff where we
proceed to say..."first message".
(closes issue #15053)
Reported by: dinhtrung
Patches:
vietnamese.ods uploaded by dinhtrung (license 776)
app_voicemail.c.diff uploaded by dinhtrung (license 776)
(closes issue #15626)
Reported by: dinhtrung
Patches:
say.c.diff uploaded by dinhtrung (license 776)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@237050 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r236509 | seanbright | 2009-12-28 07:43:36 -0500 (Mon, 28 Dec 2009) | 12 lines
Avoid a crash with large numbers of MeetMe conferences.
Similar to changes made to Queue(), when we have large numbers of conferences in
meetme.conf (1000s) and we use alloca()/strdupa(), we can blow out the stack and
crash, so instead just use a single fixed buffer.
(closes issue #16509)
Reported by: Kashif Raza
Patches:
20091223_16509.patch uploaded by seanbright (license 71)
Tested by: seanbright
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@236510 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The QUEUE_MEMBER dialplan function can return total members,
logged-in members and "free" members count. A member is counted
as "free" immediately after his call ends, even though its wrap-up
time, if specified in queues.conf, has not yet expired, and the
queue will not actually route a call to it.
This Patch introduces a new "ready" option that only counts
free agents no longer in the wrap up time period.
(closes issue #16240)
Reported by: kkm
Patches:
appqueue-memberfun-readyoption-trunk.diff uploaded by kkm (license 888)
Tested by: kkm, dvossel
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@236308 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The 'R' argument stops moh and indicates ringing once the agent is
ringing. This allows the person in the queue to know their call
is potentially about to be answered.
(closes issue #16384)
Reported by: haakon
Patches:
new_app_queue.c.patch uploaded by haakon (license 880)
Tested by: haakon, loloski, dvossel
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@236304 65c4cc65-6c06-0410-ace0-fbb531ad65f3
so we should generate T38MaxBitRate of 14400 (even though that doesn't really
affect the FAX transmission much at all)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@235010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ReadExten already supported playing a tonezone from indications.conf.
It now has the ability to use a tonelist like 440+480/2000|0/4000
(closes issue #15185)
Reported by: jcovert
Patches:
app_readexten.c.patch uploaded by jcovert (license 551)
Tested by: qwell
Patch modified by me, to maintain backwards compatibility.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@234776 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r234379 | jpeeler | 2009-12-11 16:37:21 -0600 (Fri, 11 Dec 2009) | 11 lines
Fix talking detection status after conference user is muted.
This patch ensures that when a conference user is muted that the accompanying
AMI Meetme talking off event is sent. Also, the meetme list output is updated
to show the muted user as unmonitored.
(closes issue #16247)
Reported by: dimas
Patches:
v3-16247.patch uploaded by dimas (license 88)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@234380 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As described in the CHANGES file:
* MeetMe has a new option 'G' to play an announcement before joining a
conference.
* Page has a new option 'A(x)' which will playback an announcement
simultaneously to all paged phones (and optionally excluding the caller's one
using the new option 'n') before the call is bridged.
To add the new option to meetme, the conference flag options had to be extended
to 64 bits.
(closes issue #14365)
Reported by: dferrer
Patches:
page_announce.patch uploaded by dferrer (license 525)
modified by me
Review: https://reviewboard.asterisk.org/r/188/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@234173 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix a couple of very minor bugs that prevent the socket client from working. The wrong set of properties were used in one place and the size of the address variable isn't set if the host name is an ip address. Also includes a fix for a bug that was introduced previously.
(closes issue #16121)
Reported by: thedavidfactor
Tested by: thedavidfactor
Review: https://reviewboard.asterisk.org/r/439/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@233545 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #16263)
Reported by: andrew
Patches:
pagerdate.patch uploaded by andrew (license 240)
(with a slight modification by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@232916 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r232820 | tilghman | 2009-12-03 14:10:19 -0600 (Thu, 03 Dec 2009) | 8 lines
Deprecate "cz" in favor of "cs".
Also, change the use of language codes so that language registers as a prefix,
rather than an exact match.
(closes issue #16272)
Reported by: patrol-cz
Patches:
20091203__issue16272.diff.txt uploaded by tilghman (license 14)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@232854 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously only possible per context, new option called imapfolder.
(closes issue #14298)
Reported by: jablko
Patches:
patch-200906202 uploaded by jablko (license 675)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@232700 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This caused a problem when asterisk was under heavy load and running both AGI and EIVR applications.
EIVR would close an FD at which point it would be considered freed and be used by a new AGI instance
the second close would then close the FD now in use by AGI.
(closes issue #16305)
Reported by: diLLec
Tested by: thedavidfactor, diLLec
Review: https://reviewboard.asterisk.org/r/436/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@232587 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a ref to the queue_ent object's parent call_queue
in queue_exec() so the call_queue won't be destroyed
while the the queue_ent still holds a pointer to it.
(closes issue 0015686)
Tested by: dvossel, aragon
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231556 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In 224178, I assumed the uploaded patch was correct as it had received positive
feedback. The flags were being checked in the incorrect location. Upon testing
the fix this time it was also found that the flags from the dialplan weren't
being copied to the chanspy_translation_helper.
(closes issue #16167)
Reported by: marhbere
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@228189 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change causes answertime to be correct even if the called channel hangs up during an announcement triggered by the A() option.
(closes issue #15936)
Reported by: falves11
Patches:
dial-macro-billsec-fix1.diff uploaded by mnicholson (license 96)
dial-caller-answer1.diff uploaded by mnicholson (license 96)
Tested by: falves11, mnicholson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@227897 65c4cc65-6c06-0410-ace0-fbb531ad65f3
app_controlplayback outputs a warning, when in fact it is normal.
(closes issue #16071)
Reported by: atis
Patches:
controlplayback_warning.patch uploaded by atis (license 242)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@227368 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r226889 | file | 2009-11-02 14:08:11 -0400 (Mon, 02 Nov 2009) | 11 lines
Fix a bug where the recorded privacy introduction file would not get removed if the caller hung up
while the called party had not yet answered.
This was fixed by introducing an argument to the 'n' option which, when enabled, removes the introduction
file under all scenarios. This was done to preserve the behavior that has existed for quite some time.
(closes issue #14674)
Reported by: ulogic
Patches:
bug14674.patch uploaded by jpeeler (license 325)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@226890 65c4cc65-6c06-0410-ace0-fbb531ad65f3
What this patch fixes
1.Moves sip TCP/TLS connection setup into the TCP helper thread:
Connection setup takes awhile and before this it was being
done while holding the monitor lock.
2.Moves TCP/TLS writing to the TCP helper thread: Through the
use of a packet queue and an alert pipe, the TCP helper thread
can now be woken up to write data as well as read data.
3.Locking error: sip_xmit returned an XMIT_ERROR without giving
up the tcptls_session lock. This lock has been completely removed
from sip_xmit and placed in the new sip_tcptls_write() function.
4.Memory leak: When creating a tcptls_client the tls_cfg was alloced
but never freed unless the tcptls_session failed to start. Now the
session_args for a sip client are an ao2 object which frees the
tls_cfg on destruction.
5.Pointer to stack variable: During sip_prepare_socket the creation
of a client's ast_tcptls_session_args was done on the stack and
stored as a pointer in the newly created tcptls_session. Depending
on the events that followed, there was a slight possibility that
pointer could have been accessed after the stack returned. Given
the new changes, it is always accessed after the stack returns
which is why I found it.
Notable code changes
1.I broke tcptls.c's ast_tcptls_client_start() function into two
functions. One for creating and allocating the new tcptls_session,
and a separate one for starting and handling the new connection.
This allowed me to create the tcptls_session, launch the helper
thread, and then establish the connection within the helper thread.
2.Writes to a tcptls_session are now done within the helper thread.
This is done by using an alert pipe to wake up the thread if new
data needs to be sent. The thread's sip_threadinfo object contains
the alert pipe as well as the packet queue.
3.Since the threadinfo object contains the alert pipe, it must now be
accessed outside of the helper thread for every write (queuing of a
packet). For easy lookup, I moved the threadinfo objects from a
linked list to an ao2_container.
(closes issue #13136)
Reported by: pabelanger
Tested by: dvossel, whys
(closes issue #15894)
Reported by: dvossel
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/380/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225445 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch finishes the implementation of OBJ_MULTIPLE in astobj2 (the
case where multiple results need to be returned; OBJ_NODATA mode
already was supported). In addition, it converts ast_channel_iterators
(only the targeted versions, not the ones that iterate over all
channels) to use this method.
During this work, I removed the 'ao2_flags' arguments to the
ast_channel_iterator constructor functions; there were no uses of that
argument yet, there is only one possible flag to pass, and it made the
iterators less 'opaque'. If at some point in the future someone really
needs an ast_channel_iterator that does not lock the container, we can
provide constructor(s) for that purpose.
Review: https://reviewboard.asterisk.org/r/379/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225244 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r223804 | jpeeler | 2009-10-12 18:12:50 -0500 (Mon, 12 Oct 2009) | 8 lines
Ensure ringing continues for branched calls after progress is received
While waiting for an answer, don't send progress for branched calls
for which ringing was sent.
(closes issue #15028)
Reported by: fnordian
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@223832 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Tilghman Lesher
Andrew Parisio
Russell Bryant
Richard Mudgett
Brett Bryant
Jeff Peeler
Paul Belanger
Stefan Schmidt
David Vossel
Terry Wilson
Olle Johansson
TransNexus OSP Development
Jean Galarneau
Sean Bright
Eliel C. Sardanons
Matthew Nicholson
Mark Michelson
Tzafrir Cohen
Leif Madsen
Alec L Davis
Julian Lyndon-Smith
Dwayne M. Hubbard
Kevin P. Fleming
Jared Smith
David Ruggles
Michiel van Baak
Jason Parker
Joshua Colp
David Brooks