662 Commits (73159cb45f26e5f52605beb826cd955538912458)

Author	SHA1	Message	Date
Richard Mudgett	6d9156d10f	Audit improper usage of scheduler exposed by 5c713fdf18. ... channels/chan_iax2.c: * Initialize struct chan_iax2_pvt scheduler ids earlier because of iax2_destroy_helper(). channels/chan_sip.c: channels/sip/config_parser.c: * Fix initialization of scheduler id struct members. Some off nominal paths had 0 as a scheduler id to be destroyed when it was never started. chan_skinny.c: * Fix some scheduler id comparisons that excluded the valid 0 id. channel.c: * Fix channel initialization of the video stream scheduler id. pbx_dundi.c: * Fix channel initialization of the packet retransmission scheduler id. ASTERISK-25476 Change-Id: I07a3449f728f671d326a22fcbd071f150ba2e8c8	10 years ago
Alexander Traud	1bff400df7	ast_format_cap_get_names: To display all formats, the buffer was increased. ... ASTERISK-25533 #close Change-Id: Ie1a9d1a6511b3f1a56b93d04475fbf8a4e40010a	10 years ago
Mark Michelson	629458d349	Do not swallow frames on channels leaving bridges. ... When leaving a bridge, indications on a channel could be swallowed by the internal indication logic because it appears that the channel is on its way to be hung up anyway. One such situation where this is detrimental is when channels on hold are redirected out of a bridge. The AST_CONTROL_UNHOLD indication from the bridging code is swallowed, leaving the channel in question to still appear to be on hold. The fix here is to modify the logic inside ast_indicate_data() to not drop the indication if the channel is simply leaving a bridge. This way, channels on hold redirected out of a bridge revert to their expected "in use" state after the redirection. ASTERISK-25418 #close Reported by Mark Michelson Change-Id: If6115204dfa0551c050974ee138fabd15f978949	10 years ago
Mark Michelson	10ba72a927	Add a test event for inband ringing. ... This event is necessary for the bridge_wait_e_options test to be able to confirm that ringing is being played on the local channel that runs the BridgeWait() application with the e(r) option. ASTERISK-25292 #close Reported by Kevin Harwell Change-Id: Ifd3d3d2bebc73344d4b5310d0d55c7675359d72e	10 years ago
Jonathan Rose	8458b8d441	holding_bridge: ensure moh participants get frames ... Currently, if a blank musiconhold.conf is used, musiconhold will fail to start for a channel going into a holding bridge with an anticipation of getting music on hold. That being the case, no frames will be written to the channel and that can pose a problem for blind transfers in PJSIP which may rely on frames being written to get past the REFER framehook. This patch makes holding bridges start a silence generator if starting music on hold fails and makes it so that if no music on hold functions are installed that the ast_moh_start function will report a failure so that consumers of that function will be able to respond appropriately. ASTERISK-25271 #close Change-Id: I06f066728604943cba0bb0b39fa7cf658a21cd99	10 years ago
Joshua Colp	e4a2ef9e4e	channel: Remove ignore of answer on non-outgoing channels. ... Due to the way that channels can now be moved around inside of Asterisk it is possible for the outgoing flag of a channel to get cleared before it has been answered. This results in the bridge not receiving notification that the outgoing leg has been answered. This most easily exhibits itself with DTMF based blond transfers. Since the answer of the outgoing leg is ignored the other party continues to receive both a locally generated ringing and the media stream of the outgoing leg upon its answer. This results in no media being heard. This change removes the ignore of the answer and allows it to pass through. ASTERISK-25171 #close Change-Id: I82aedcec4f89f34a2e5472086dfc9a6c775bca8e	10 years ago
Corey Farrell	ad6ea29697	Remove unneeded uses of optional_api providers. ... A few cases exist where headers of optional_api provders are included but not needed. This causes unneeded calls to ast_optional_api_use. * Don't include optional_api.h from sip_api.h. * Move 'struct ast_channel_monitor' to channel.h. * Don't include monitor.h from chan_sip.c, channel.c or features.c. The move of struct ast_channel_monitor is needed since channel.c depends on it. This has no effect on users of monitor.h since channel.h is included from monitor.h. ASTERISK-25051 #close Reported by: Corey Farrell Change-Id: I53ea65a9fc9693c89f8bcfd6120649bfcfbc3478	11 years ago
Mark Michelson	4f1a8dbe92	Detect potential forwarding loops based on count. ... A potential problem that can arise is the following: * Bob's phone is programmed to automatically forward to Carol. * Carol's phone is programmed to automatically forward to Bob. * Alice calls Bob. If left unchecked, this results in an endless loops of call forwards that would eventually result in some sort of fiery crash. Asterisk's method of solving this issue was to track which interfaces had been dialed. If a destination were dialed a second time, then the attempt to call that destination would fail since a loop was detected. The problem with this method is that call forwarding has evolved. Some SIP phones allow for a user to manually forward an incoming call to an ad-hoc destination. This can mean that: * There are legitimate use cases where a device may be dialed multiple times, or * There can be human error when forwarding calls. This change removes the old method of detecting forwarding loops in favor of keeping a count of the number of destinations a channel has dialed on a particular branch of a call. If the number exceeds the set number of max forwards, then the call fails. This approach has the following advantages over the old: * It is much simpler. * It can detect loops involving local channels. * It is user configurable. The only disadvantage it has is that in the case where there is a legitimate forwarding loop present, it takes longer to detect it. However, the forwarding loop is still properly detected and the call is cleaned up as it should be. Address review feedback on gerrit. * Correct "mfgium" to "Digium" * Decrement max forwards by one in the case where allocation of the max forwards datastore is required. * Remove irrelevant code change from pjsip_global_headers.c ASTERISK-24958 #close Change-Id: Ia7e4b7cd3bccfbd34d9a859838356931bba56c23	11 years ago
Richard Mudgett	13cd99682d	chan_pjsip/res_pjsip/bridge_softmix/core: Improve translation path choices. ... With this patch, chan_pjsip/res_pjsip now sets the native formats to the codecs negotiated by a call. * The changes in chan_pjsip.c and res_pjsip_sdp_rtp.c set the native formats to include all the negotiated audio codecs instead of only the initial preferred audio codec and later the currently received audio codec. * The audio frame handling in channel.c:ast_read() is more streamlined and will automatically adjust to changes in received frame formats. The new policy is to remove translation and pass the new frame format to the receiver except if the translation was to a signed linear format. A more long winded version is commented in ast_read() along with some caveats. * The audio frame handling in channel.c:ast_write() is more streamlined and will automatically adjust any needed translation to changes in the frame formats sent. Frame formats sent can change for many reasons such as a recording is being played back or the bridged peer changed the format it sends. Since it is a normal expectation that sent formats can change, the codec mismatch warning message is demoted to a debug message. * Removed the short circuit check in channel.c:ast_channel_make_compatible_helper(). Two party bridges need to make channels compatible with each other. However, transfers and moving channels among bridges can result in otherwise compatible channels having sub-optimal translation paths if the make compatible check is short circuited. A result of forcing the reevaluation of channel compatibility is that the asterisk.conf:transcode_via_slin and codecs.conf:genericplc options take effect consistently now. It is unfortunate that these two options are enabled by default and negate some of the benefits to the changes in channel.c:ast_read() by forcing translation through signed linear on a two party bridge. * Improved the softmix bridge technology to better control the translation of frames to the bridge. All of the incoming translation is now normally handled by ast_read() instead of splitting any translation steps between ast_read() and the slin factory. If any frame comes in with an unexpected format then the translation path in ast_read() is updated for the next frame and the slin factory handles the current frame translation. This is the final patch in a series of patches aimed at improving translation path choices. The other patches are on the following reviews: https://reviewboard.asterisk.org/r/4600/ https://reviewboard.asterisk.org/r/4605/ ASTERISK-24841 #close Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/4609/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434671 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	125acc52fe	bridge_softmix.c,channel.c: Minor code simplification and cleanup. ... * Made code easier to follow in bridge_softmix.c:analyse_softmix_stats() and made some debug messages more helpful. * Made some debug and warning messages more helpful in channel.c:set_format(). Review: https://reviewboard.asterisk.org/r/4607/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434617 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	a63f7ad04a	translate.c: Only select audio codecs to determine the best translation choice. ... Given a source capability of h264 and ulaw, a destination capability of h264 and g722 then ast_translator_best_choice() would pick h264 as the best choice even though h264 is a video codec and Asterisk only supports translation of audio codecs. When the audio starts flowing, there are warnings about a codec mismatch when the channel tries to write a frame to the peer. * Made ast_translator_best_choice() only select audio codecs. * Restore a check in channel.c:set_format() lost after v1.8 to prevent trying to set a non-audio codec. This is an intermediate patch for a series of patches aimed at improving translation path choices for ASTERISK-24841. This patch is a complete enough fix for ASTERISK-21777 as the v11 version of ast_translator_best_choice() does the same thing. However, chan_sip.c still somehow tries to call ast_codec_choose() which then calls ast_best_codec() with a capability set that doesn't contain any audio formats for the incoming call. The remaining warning message seems to be a benign transient. ASTERISK-21777 #close Reported by: Nick Ruggles ASTERISK-24380 #close Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/4605/ ........ Merged revisions 434614 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434615 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	ab803ec342	ARI: Add the ability to intercept hold and raise an event ... For some applications - such as SLA - a phone pressing hold should not behave in the fashion that the Asterisk core would like it to. Instead, the hold action has some application specific behaviour associated with it - such as disconnecting the channel that initiated the hold; only playing MoH to channels in the bridge if the channels are of a particular type, etc. One way of accomplishing this is to use a framehook to intercept the hold/unhold frames, raise an event, and eat the frame. Tasty. This patch accomplishes that using a new dialplan function, HOLD_INTERCEPT. In addition, some general cleanup of raising hold/unhold Stasis messages was done, including removing some RAII_VAR usage. Review: https://reviewboard.asterisk.org/r/4549/ ASTERISK-24922 #close git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434216 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	eb70993a50	clang compiler warnings: Fix -Wparantheses-equality warnings ... Clang will treat ((a == b)) as a warning, as it reasonably expects that the developer may have intended to write (a == b) or ((a = b)). This patch cleans up all instances where equality, not assignment, was intended between two parantheses. Review: https://reviewboard.asterisk.org/r/4531/ ASTERISK-24917 Repoted by: dkdegroot patches: rb4531.patch submitted by dkdegroot (License 6600) ........ Merged revisions 433687 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433688 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Corey Farrell	6adf26f14d	Replace most uses of ast_register_atexit with ast_register_cleanup. ... Since 'core stop now' and 'core restart now' do not stop modules, it is unsafe for most of the core to run cleanups. Originally all cleanups used ast_register_atexit, and were only changed when it was shown to be unsafe. ast_register_atexit is now used only when absolutely required to prevent corruption and close child processes. Exceptions that need to use ast_register_atexit: * CDR: Flush records. * res_musiconhold: Kill external applications. * AstDB: Close the DB. * canary_exit: Kill canary process. ASTERISK-24142 #close Reported by: David Brillert ASTERISK-24683 #close Reported by: Peter Katzmann ASTERISK-24805 #close Reported by: Badalian Vyacheslav ASTERISK-24881 #close Reported by: Corey Farrell Review: https://reviewboard.asterisk.org/r/4500/ Review: https://reviewboard.asterisk.org/r/4501/ ........ Merged revisions 433495 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433497 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	169058e73f	app_chanspy, channel: fix frame leaks ... Fixed a couple of frame leaks that were found during testing. ASTERISK-24828 #close Reported by: John Hardin Review: https://reviewboard.asterisk.org/r/4445/ ........ Merged revisions 432362 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432363 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	3d1a1533bf	ARI/PJSIP: Apply requesting channel's format cap to created channels ... This patch addresses the following problems: * ari/resource_channels: In ARI, we currently create a format capability structure of SLIN and apply it to the new channel being created. This was originally done when the PBX core was used to create the channel, as there was a condition where a newly created channel could be created without any formats. Unfortunately, now that the Dial API is being used, this has two drawbacks: (a) SLIN, while it will ensure audio will flows, can cause a lot of needless transcodings to occur, particularly when a Local channel is created to the dialplan. When no format capabilities are available, the Dial API handles this better by handing all audio formats to the requsted channels. As such, we defer to that API to provide the format capabilities. (b) If a channel (requester) is causing this channel to be created, we currently don't use its format capabilities as we are passing in our own. However, the Dial API will use the requester channel's formats if none are passed into it, and the requester channel exists and has format capabilities. This is the "best" scenario, as it is the most likely to create a media path that minimizes transcoding. Fixing this simply entails removing the providing of the format capabilities structure to the Dial API. * chan_pjsip: Rather than blindly picking the first format in the format capability structure - which actually *can* be a video or text format - we select an audio format, and only pick the first format if that fails. That minimizes the weird scenario where we attempt to transcode between video/audio. * res_pjsip_sdp_rtp: Applied the joint capapbilites to the format structure. Since ast_request already limits us down to one format capability once the format capabilities are passed along, there's no reason to squelch it here. * channel: Fixed a comment. The reason we have to minimize our requested format capabilities down to a single format is due to Asterisk's inability to convey the format to be used back "up" a channel chain. Consider the following: PJSIP/A => L;1 <=> L;2 => PJSIP/B g,u,a g,u,a g,u,a u That is, we have PJSIP/A dialing a Local channel, where the Local;2 dials PJSIP/B. PJSIP/A has native format capabilities g722,ulaw,alaw; the Local channel has inherited those format capabilities down the line; PJSIP/B supports only ulaw. According to these format capabilities, ulaw is acceptable and should be selected across all the channels, and no transcoding should occur. However, there is no way to convey this: when L;2 and PJSIP/B are put into a bridge, we will select ulaw, but that is not conveyed to PJSIP/A and L;1. Thus, we end up with: PJSIP/A <=> L;1 <=> L;2 <=> PJSIP/B g g X u u Which causes g722 to be written to PJSIP/B. Even if we can convey the 'ulaw' choice back up the chain (which through some severe hacking in Local channels was accomplished), such that the chain looks like: PJSIP/A <=> L;1 <=> L;2 <=> PJSIP/B u u u u We have no way to tell PJSIP/A's *channel driver* to Answer in the SDP back with only 'ulaw'. This results in all the channel structures being set up correctly, but PJSIP/A *still* sending g722 and causing the chain to fall apart. There's a lot of difficulty just in setting this up, as there are numerous race conditions in the act of bridging, and no clean mechanism to pass the selected format backwards down an established channel chain. As such, the best that can be done at this point in time is clarifying the comment. Review: https://reviewboard.asterisk.org/r/4434/ ASTERISK-24812 #close Reported by: Matt Jordan git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432195 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	feddab7944	HTTP: Stop accepting requests on final system shutdown. ... There are three CLI commands to stop and restart Asterisk each. 1) core stop/restart now - Hangup all calls and stop or restart Asterisk. New channels are prevented while the shutdown request is pending. 2) core stop/restart gracefully - Stop or restart Asterisk when there are no calls remaining in the system. New channels are prevented while the shutdown request is pending. 3) core stop/restart when convenient - Stop or restart Asterisk when there are no calls in the system. New calls are not prevented while the shutdown request is pending. ARI has made stopping/restarting Asterisk more problematic. While a shutdown request is pending it is desirable to continue to process ARI HTTP requests for current calls. To handle the current calls while a shutdown request is pending, a new committed to shutdown phase is needed so ARI applications can deal with the calls until the system is fully committed to shutdown. * Added a new shutdown committed phase so ARI applications can deal with calls until the final committed to shutdown phase is reached. * Made refuse new HTTP requests when the system has reached the final system shutdown phase. Starting anything while the system is actively releasing resources and unloading modules is not a good thing. * Split the bridging framework shutdown to not cleanup the global bridging containers when shutting down in a hurry. This is similar to how other modules prevent crashes on rapid system shutdown. * Moved ast_begin_shutdown(), ast_cancel_shutdown(), and ast_shutting_down(). You should not have to include channel.h just to access these system functions. ASTERISK-24752 #close Reported by: Matthew Jordan Review: https://reviewboard.asterisk.org/r/4399/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431692 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	93b1df3bf6	Add new AMI and ARI events for connected line changes on a channel. ... The AMI event is called NewConnectedLine and the ARI event is called ChannelConnectedLine. ASTERISK-24554 #close Reported by Matt Jordan Review: https://reviewboard.asterisk.org/r/4231 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429064 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	55c9a46abd	Stasis: Fix StasisStart/End order and missing events ... This corrects several bugs that currently exist in the stasis application code. * After a masquerade, the resulting channels have channel topics that do not match their uniqueids ** Masquerades now swap channel topics appropriately * StasisStart and StasisEnd messages are leaked to observer applications due to being published on channel topics ** StasisStart and StasisEnd publishing is now properly restricted to controlling apps via app topics * Race conditions exist where StasisStart and StasisEnd messages due to a masquerade may be received out of order due to being published on different topics ** These messages are now published directly on the app topic so this is now a non-issue * StasisEnds are sometimes missing when sent due to masquerades and bridge swaps into and out of Stasis() ** This was due to StasisEnd processing adjusting message-sent flags after Stasis() had already exited and Stasis() had been re-entered ** This was corrected by adjusting these flags prior to sending the message while the initial Stasis() application was still shutting down Review: https://reviewboard.asterisk.org/r/4213/ ASTERISK-24537 #close Reported by: Matt DiMeo ........ Merged revisions 429061 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429062 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	0104fb0c60	channel: Extend size of buffer for codecs in "core show channeltype" CLI command. ... The static buffer for codecs when invoking the "core show channeltype" CLI command did not have enough room for all codecs. This has been extended so it does. ASTERISK-24542 #close Reported by: snuffy patches: channeltype-tech.diff submitted by snuffy (license 5024) Review: https://reviewboard.asterisk.org/r/4204/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428632 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	fa94bc815b	AMI: Add missing VarSet events when a channel inherits variables. ... There should be AMI VarSet events when channel variables are inherited by an outgoing channel. Also local;2 should generate VarSet events when it gets all of its channel variables from channel local;1. ASTERISK-24415 #close Reported by: Richard Mudgett Patches: jira_asterisk_24415_v12.patch (license #5621) patch uploaded by Richard Mudgett Review: https://reviewboard.asterisk.org/r/4074/ ........ Merged revisions 425782 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425783 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	6a844be566	chan_pjsip: Fix deadlock when masquerading PJSIP channels. ... Performing a directed call pickup resulted in a deadlock when PJSIP channels were involved. A masquerade needs to hold onto the channel locks while it swaps channel information between the two channels involved in the masquerade. With PJSIP channels, the fixup routine needed to push a fixup task onto the PJSIP channel's serializer. Unfortunately, if the serializer was also processing a task that needed to lock the channel, you get deadlock. * Added a new control frame that is used to notify the channels that a masquerade is about to start and when it has completed. * Added the ability to query taskprocessors if the current thread is the taskprocessor thread. * Added the ability to suspend/unsuspend the PJSIP serializer thread so a masquerade could fixup the PJSIP channel without using the serializer. ASTERISK-24356 #close Reported by: rmudgett Review: https://reviewboard.asterisk.org/r/4034/ ........ Merged revisions 424471 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@424472 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	d85e59a23b	main/channel: Unlock channel in off-nominal path ... In r423414 (13) / r423415 (trunk), an API call that determines if a format capability structure is empty was added. This returns true if the format capability structure is completely empty or "none". A check for this was added in channel.c's set_format call. Unfortunately, when this check was true, it returned from the function while still holding the channel lock. This caused the CDR unit tests - which have a tendency to create channels with no formats - to deadlock. Whoops. This patch unlocks the channel on the off-nominal path. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@423641 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	23a375be5f	Add API call to determine if format capability structure is "empty". ... Empty here means that there are no formats in the format_cap structure or the only format in it is the "none" format. I've added calls to check the emptiness of a format_cap in a few places in order to short-circuit operations that would otherwise be pointless as well as to prevent some assertions from being triggered in cases where channels with no formats are used. git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@423414 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	e8b72c6f4b	chan_pjsip: Update media translation paths when new SDP negotiated. ... On a SIP reinvite that changes media strams, the PJSIP channel driver was flooding the log with "Asked to transmit frame type %s, while native formats is %s" warnings. * Fixes PJSIP not setting up translation paths when the formats change on a reinvite. AFS-63 was effectively reintroduced because of the media formats work. res_pjsip_sdp_rtp.c:set_caps() * Improved the unexpected frame format WARNING message to include more information. * Added protective locking while altering formats on a channel. Reworked set_format() to simplify and protect the formats under manipulation. * Restored some code that got lost in the media_formats work. (channel.c:set_format() and res_pjsip_sdp_rtp.c:set_caps()) AFS-137 #close Reported by: Mark Michelson Review: https://reviewboard.asterisk.org/r/3906/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421645 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Jonathan Rose	2c013ae774	Bridging: Fix a behavioral change when checking if a channel is leaving a bridge ... r420934 introduced some failures in the test suite. Upon investigating, it was discovered that differences in the way we were evaluating whether a channel was in the process of leaving a bridge were causing some reinvites not to occur (mostly reinvites back to Asterisk when ending a call). This patch fixes that behavioral change. ASTERISK-24027 #close Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/3910/ ........ Merged revisions 421186 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421187 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	7eb4ee9b2f	channel_internal_api.c: Replace some code with ao2_replace(). ... Use ao2_replace() instead of ao2_cleanup(); ao2_bump(). ao2_replace() has the advantange of not altering the ref count if the replaced pointer is the same. Review: https://reviewboard.asterisk.org/r/3904/ git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@420992 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Jonathan Rose	cd28e5dda2	Bridges: Fix feature interruption/unintended kick caused by external actions ... If a manager or CLI user attached a mixmonitor to a call running a dynamic bridge feature while in a bridge, the feature would be interrupted and the channel would be forcibly kicked out of the bridge (usually ending the call during a simple 1 to 1 call). This would also occur during any similar action that could set the unbridge soft hangup flag, so the fix for this was to remove unbridge from the soft hangup flags and make it a separate thing all together. ASTERISK-24027 #close Reported by: mjordan Review: https://reviewboard.asterisk.org/r/3900/ ........ Merged revisions 420934 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@420940 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	0ac7f96057	Stasis: Convey transfer information to applications ... This fixes a class of issues where Stasis applications were not made aware that their channels were being manipulated or replaced by external entitiessuch as transfers, AMI commands, or dialplan applications such as Bridge(). Inconsistent information such as StasisEnd events with unknown channels as a result of masquerades has also been corrected. To accomplish these fixes, several new fields were added to blind and attended transfer messages as well as StasisStart and BridgeAttendedTransfer Stasis events. ASTERISK-23941 #close Review: https://reviewboard.asterisk.org/r/3865/ Review: https://reviewboard.asterisk.org/r/3857/ Review: https://reviewboard.asterisk.org/r/3852/ Review: https://reviewboard.asterisk.org/r/3816/ Review: https://reviewboard.asterisk.org/r/3731/ Review: https://reviewboard.asterisk.org/r/3729/ Review: https://reviewboard.asterisk.org/r/3728/ ........ Merged revisions 420325 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420338 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	f1036f40dc	Stasis: Allow message types to be blocked ... This introduces stasis.conf and a mechanism to prevent certain message types from being published. Internally, this works by preventing the chosen message types from being created which ensures that those message types can never be published. This patch also adjusts message publishers such that message payloads are not created if the related message type is not available. ASTERISK-23943 #close Review: https://reviewboard.asterisk.org/r/3823/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420124 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	2758cc76e5	datastores: Audit ast_channel_datastore_remove usage. ... Audit of v1.8 usage of ast_channel_datastore_remove() for datastore memory leaks. * Fixed leaks in app_speech_utils and func_frame_trace. * Fixed app_speech_utils not locking the channel when accessing the channel datastore list. Review: https://reviewboard.asterisk.org/r/3859/ Audit of v11 usage of ast_channel_datastore_remove() for datastore memory leaks. * Fixed leak in func_jitterbuffer. (Was not in v12) Review: https://reviewboard.asterisk.org/r/3860/ Audit of v12 usage of ast_channel_datastore_remove() for datastore memory leaks. * Fixed leaks in abstract_jb. * Fixed leak in ast_channel_unsuppress(). Used by ARI mute control and res_mutestream. * Fixed ref leak in ast_channel_suppress(). Used by ARI mute control and res_mutestream. Review: https://reviewboard.asterisk.org/r/3861/ ........ Merged revisions 419684 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 419685 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 419686 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419688 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	a2ce95d9d2	accountcode: Slightly change accountcode propagation. ... The previous behavior was to simply set the accountcode of an outgoing channel to the accountcode of the channel initiating the call. It was done this way a long time ago to allow the accountcode set on the SIP/100 channel to be propagated to a local channel so the dialplan execution on the Local;2 channel would have the SIP/100 accountcode available. SIP/100 -> Local;1/Local;2 -> SIP/200 Propagating the SIP/100 accountcode to the local channels is very useful. Without any dialplan manipulation, all channels in this call would have the same accountcode. Using dialplan, you can set a different accountcode on the SIP/200 channel either by setting the accountcode on the Local;2 channel or by the Dial application's b(pre-dial), M(macro) or U(gosub) options, or by the FollowMe application's b(pre-dial) option, or by the Queue application's macro or gosub options. Before Asterisk v12, the altered accountcode on SIP/200 will remain until the local channels optimize out and the accountcode would change to the SIP/100 accountcode. Asterisk v1.8 attempted to add peeraccount support but ultimately had to punt on the support. The peeraccount support was rendered useless because of how the CDR code needed to unconditionally force the caller's accountcode onto the peer channel's accountcode. The CEL events were thus intentionally made to always use the channel's accountcode as the peeraccount value. With the arrival of Asterisk v12, the situation has improved somewhat so peeraccount support can be made to work. Using the indicated example, the the accountcode values become as follows when the peeraccount is set on SIP/100 before calling SIP/200: SIP/100 ---> Local;1 ---- Local;2 ---> SIP/200 acct: 100 \/ acct: 200 \/ acct: 100 \/ acct: 200 peer: 200 /\ peer: 100 /\ peer: 200 /\ peer: 100 If a channel already has an accountcode it can only change by the following explicit user actions: 1) A channel originate method that can specify an accountcode to use. 2) The calling channel propagating its non-empty peeraccount or its non-empty accountcode if the peeraccount was empty to the outgoing channel's accountcode before initiating the dial. e.g., Dial and FollowMe. The exception to this propagation method is Queue. Queue will only propagate peeraccounts this way only if the outgoing channel does not have an accountcode. 3) Dialplan using CHANNEL(accountcode). 4) Dialplan using CHANNEL(peeraccount) on the other end of a local channel pair. If a channel does not have an accountcode it can get one from the following places: 1) The channel driver's configuration at channel creation. 2) Explicit user action as already indicated. 3) Entering a basic or stasis-mixing bridge from a peer channel's peeraccount value. You can specify the accountcode for an outgoing channel by setting the CHANNEL(peeraccount) before using the Dial, FollowMe, and Queue applications. Queue adds the wrinkle that it will not overwrite an existing accountcode on the outgoing channel with the calling channels values. Accountcode and peeraccount values propagate to an outgoing channel before dialing. Accountcodes also propagate when channels enter or leave a basic or stasis-mixing bridge. The peeraccount value only makes sense for mixing bridges with two channels; it is meaningless otherwise. * Made peeraccount functional by changing accountcode propagation as described above. * Fixed CEL extracting the wrong ie value for the peeraccount. This was done intentionally in Asterisk v1.8 when that version had to punt on peeraccount. * Fixed a few places dealing with accountcodes that were reading from channels without the lock held. AFS-65 #close Review: https://reviewboard.asterisk.org/r/3601/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419520 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	bb87796f67	ARI: Fix endpoint/channel subscription issues; allow for subscriptions to tech ... This patch serves two purposes: (1) It fixes some bugs with endpoint subscriptions not reporting all of the channel events (2) It serves as the preliminary work needed for ASTERISK-23692, which allows for sending/receiving arbitrary out of call text messages through ARI in a technology agnostic fashion. The messaging functionality described on ASTERISK-23692 requires two things: (1) The ability to send/receive messages associated with an endpoint. This is relatively straight forwards with the endpoint core in Asterisk now. (2) The ability to send/receive messages associated with a technology and an arbitrary technology defined URI. This is less straight forward, as endpoints are formed from a tech + resource pair. We don't have a mechanism to note that a technology that *may* have endpoints exists. This patch provides such a mechanism, and fixes a few bugs along the way. The first major bug this patch fixes is the forwarding of channel messages to their respective endpoints. Prior to this patch, there were two problems: (1) Channel caching messages weren't forwarded. Thus, the endpoints missed most of the interesting bits (such as channel creation, destruction, state changes, etc.) (2) Channels weren't associated with their endpoint until after creation. This resulted in endpoints missing the channel creation message, which limited the usefulness of the subscription in the first place (a major use case being 'tell me when this endpoint has a channel'). Unfortunately, this meant another parameter to ast_channel_alloc. Since not all channel technologies support an ast_endpoint, this patch makes such a call optional and opts for a new function, ast_channel_alloc_with_endpoint. When endpoints are created, they will implicitly create a technology endpoint for their technology (if one does not already exist). A technology endpoint is special in that it has no state, cannot have channels created for it, cannot be created explicitly, and cannot be destroyed except on shutdown. It does, however, have all messages from other endpoints in its technology forwarded to it. Combined with the bug fixes, we now have Stasis messages being properly forwarded. Consider the following scenario: two PJSIP endpoints (foo and bar), where bar has a single channel associated with it and foo has two channels associated with it. The messages would be forwarded as follows: channel PJSIP/foo-1 -- \ --> endpoint PJSIP/foo -- / \ channel PJSIP/foo-2 -- \ ---- > endpoint PJSIP / channel PJSIP/bar-1 -----> endpoint PJSIP/bar -- ARI, through the applications resource, can: - subscribe to endpoint:PJSIP/foo and get notifications for channels PJSIP/foo-1,PJSIP/foo-2 and endpoint PJSIP/foo - subscribe to endpoint:PJSIP/bar and get notifications for channels PJSIP/bar-1 and endpoint PJSIP/bar - subscribe to endpoint:PJSIP and get notifications for channels PJSIP/foo-1,PJSIP/foo-2,PJSIP/bar-1 and endpoints PJSIP/foo,PJSIP/bar Note that since endpoint PJSIP never changes, it never has events itself. It merely provides an aggregation point for all other endpoints in its technology (which in turn aggregate all channel messages associated with that endpoint). This patch also adds endpoints to res_xmpp and chan_motif, because the actual messaging work will need it (messaging without XMPP is just sad). Review: https://reviewboard.asterisk.org/r/3760/ ASTERISK-23692 ........ Merged revisions 419196 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419203 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	a2c912e997	media formats: re-architect handling of media for performance improvements ... In the old times media formats were represented using a bit field. This was fast but had a few limitations. 1. Asterisk was limited in how many formats it could handle. 2. Formats, being a bit field, could not include any attribute information. A format was strictly its type, e.g., "this is ulaw". This was changed in Asterisk 10 (see https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal for notes on that work) which led to the creation of the ast_format structure. This structure allowed Asterisk to handle attributes and bundle information with a format. Additionally, ast_format_cap was created to act as a container for multiple formats that, together, formed the capability of some entity. Another mechanism was added to allow logic to be registered which performed format attribute negotiation. Everywhere throughout the codebase Asterisk was changed to use this strategy. Unfortunately, in software, there is no free lunch. These new capabilities came at a cost. Performance analysis and profiling showed that we spend an inordinate amount of time comparing, copying, and generally manipulating formats and their related structures. Basic prototyping has shown that a reasonably large performance improvement could be made in this area. This patch is the result of that project, which overhauled the media format architecture and its usage in Asterisk to improve performance. Generally, the new philosophy for handling formats is as follows: * The ast_format structure is reference counted. This removed a large amount of the memory allocations and copying that was done in prior versions. * In order to prevent race conditions while keeping things performant, the ast_format structure is immutable by convention and lock-free. Violate this tenet at your peril! * Because formats are reference counted, codecs are also reference counted. The Asterisk core generally provides built-in codecs and caches the ast_format structures created to represent them. Generally, to prevent inordinate amounts of module reference bumping, codecs and formats can be added at run-time but cannot be removed. * All compatibility with the bit field representation of codecs/formats has been moved to a compatibility API. The primary user of this representation is chan_iax2, which must continue to maintain its bit-field usage of formats for interoperability concerns. * When a format is negotiated with attributes, or when a format cannot be represented by one of the cached formats, a new format object is created or cloned from an existing format. That format may have the same codec underlying it, but is a different format than a version of the format with different attributes or without attributes. * While formats are reference counted objects, the reference count maintained on the format should be manipulated with care. Formats are generally cached and will persist for the lifetime of Asterisk and do not explicitly need to have their lifetime modified. An exception to this is when the user of a format does not know where the format came from *and* the user may outlive the provider of the format. This occurs, for example, when a format is read from a channel: the channel may have a format with attributes (hence, non-cached) and the user of the format may last longer than the channel (if the reference to the channel is released prior to the format's reference). For more information on this work, see the API design notes: https://wiki.asterisk.org/wiki/display/AST/Media+Format+Rewrite Finally, this work was the culmination of a large number of developer's efforts. Extra thanks goes to Corey Farrell, who took on a large amount of the work in the Asterisk core, chan_sip, and was an invaluable resource in peer reviews throughout this project. There were a substantial number of patches contributed during this work; the following issues/patch names simply reflect some of the work (and will cause the release scripts to give attribution to the individuals who work on them). Reviews: https://reviewboard.asterisk.org/r/3814 https://reviewboard.asterisk.org/r/3808 https://reviewboard.asterisk.org/r/3805 https://reviewboard.asterisk.org/r/3803 https://reviewboard.asterisk.org/r/3801 https://reviewboard.asterisk.org/r/3798 https://reviewboard.asterisk.org/r/3800 https://reviewboard.asterisk.org/r/3794 https://reviewboard.asterisk.org/r/3793 https://reviewboard.asterisk.org/r/3792 https://reviewboard.asterisk.org/r/3791 https://reviewboard.asterisk.org/r/3790 https://reviewboard.asterisk.org/r/3789 https://reviewboard.asterisk.org/r/3788 https://reviewboard.asterisk.org/r/3787 https://reviewboard.asterisk.org/r/3786 https://reviewboard.asterisk.org/r/3784 https://reviewboard.asterisk.org/r/3783 https://reviewboard.asterisk.org/r/3778 https://reviewboard.asterisk.org/r/3774 https://reviewboard.asterisk.org/r/3775 https://reviewboard.asterisk.org/r/3772 https://reviewboard.asterisk.org/r/3761 https://reviewboard.asterisk.org/r/3754 https://reviewboard.asterisk.org/r/3753 https://reviewboard.asterisk.org/r/3751 https://reviewboard.asterisk.org/r/3750 https://reviewboard.asterisk.org/r/3748 https://reviewboard.asterisk.org/r/3747 https://reviewboard.asterisk.org/r/3746 https://reviewboard.asterisk.org/r/3742 https://reviewboard.asterisk.org/r/3740 https://reviewboard.asterisk.org/r/3739 https://reviewboard.asterisk.org/r/3738 https://reviewboard.asterisk.org/r/3737 https://reviewboard.asterisk.org/r/3736 https://reviewboard.asterisk.org/r/3734 https://reviewboard.asterisk.org/r/3722 https://reviewboard.asterisk.org/r/3713 https://reviewboard.asterisk.org/r/3703 https://reviewboard.asterisk.org/r/3689 https://reviewboard.asterisk.org/r/3687 https://reviewboard.asterisk.org/r/3674 https://reviewboard.asterisk.org/r/3671 https://reviewboard.asterisk.org/r/3667 https://reviewboard.asterisk.org/r/3665 https://reviewboard.asterisk.org/r/3625 https://reviewboard.asterisk.org/r/3602 https://reviewboard.asterisk.org/r/3519 https://reviewboard.asterisk.org/r/3518 https://reviewboard.asterisk.org/r/3516 https://reviewboard.asterisk.org/r/3515 https://reviewboard.asterisk.org/r/3512 https://reviewboard.asterisk.org/r/3506 https://reviewboard.asterisk.org/r/3413 https://reviewboard.asterisk.org/r/3410 https://reviewboard.asterisk.org/r/3387 https://reviewboard.asterisk.org/r/3388 https://reviewboard.asterisk.org/r/3389 https://reviewboard.asterisk.org/r/3390 https://reviewboard.asterisk.org/r/3321 https://reviewboard.asterisk.org/r/3320 https://reviewboard.asterisk.org/r/3319 https://reviewboard.asterisk.org/r/3318 https://reviewboard.asterisk.org/r/3266 https://reviewboard.asterisk.org/r/3265 https://reviewboard.asterisk.org/r/3234 https://reviewboard.asterisk.org/r/3178 ASTERISK-23114 #close Reported by: mjordan media_formats_translation_core.diff uploaded by kharwell (License 6464) rb3506.diff uploaded by mjordan (License 6283) media_format_app_file.diff uploaded by kharwell (License 6464) misc-2.diff uploaded by file (License 5000) chan_mild-3.diff uploaded by file (License 5000) chan_obscure.diff uploaded by file (License 5000) jingle.diff uploaded by file (License 5000) funcs.diff uploaded by file (License 5000) formats.diff uploaded by file (License 5000) core.diff uploaded by file (License 5000) bridges.diff uploaded by file (License 5000) mf-codecs-2.diff uploaded by file (License 5000) mf-app_fax.diff uploaded by file (License 5000) mf-apps-3.diff uploaded by file (License 5000) media-formats-3.diff uploaded by file (License 5000) ASTERISK-23715 rb3713.patch uploaded by coreyfarrell (License 5909) rb3689.patch uploaded by mjordan (License 6283) ASTERISK-23957 rb3722.patch uploaded by mjordan (License 6283) mf-attributes-3.diff uploaded by file (License 5000) ASTERISK-23958 Tested by: jrose rb3822.patch uploaded by coreyfarrell (License 5909) rb3800.patch uploaded by jrose (License 6182) chan_sip.diff uploaded by mjordan (License 6283) rb3747.patch uploaded by jrose (License 6182) ASTERISK-23959 #close Tested by: sgriepentrog, mjordan, coreyfarrell sip_cleanup.diff uploaded by opticron (License 6273) chan_sip_caps.diff uploaded by mjordan (License 6283) rb3751.patch uploaded by coreyfarrell (License 5909) chan_sip-3.diff uploaded by file (License 5000) ASTERISK-23960 #close Tested by: opticron direct_media.diff uploaded by opticron (License 6273) pjsip-direct-media.diff uploaded by file (License 5000) format_cap_remove.diff uploaded by opticron (License 6273) media_format_fixes.diff uploaded by opticron (License 6273) chan_pjsip-2.diff uploaded by file (License 5000) ASTERISK-23966 #close Tested by: rmudgett rb3803.patch uploaded by rmudgetti (License 5621) chan_dahdi.diff uploaded by file (License 5000) ASTERISK-24064 #close Tested by: coreyfarrell, mjordan, opticron, file, rmudgett, sgriepentrog, jrose rb3814.patch uploaded by rmudgett (License 5621) moh_cleanup.diff uploaded by opticron (License 6273) bridge_leak.diff uploaded by opticron (License 6273) translate.diff uploaded by file (License 5000) rb3795.patch uploaded by rmudgett (License 5621) tls_fix.diff uploaded by mjordan (License 6283) fax-mf-fix-2.diff uploaded by file (License 5000) rtp_transfer_stuff uploaded by mjordan (License 6283) rb3787.patch uploaded by rmudgett (License 5621) media-formats-explicit-translate-format-3.diff uploaded by file (License 5000) format_cache_case_fix.diff uploaded by opticron (License 6273) rb3774.patch uploaded by rmudgett (License 5621) rb3775.patch uploaded by rmudgett (License 5621) rtp_engine_fix.diff uploaded by opticron (License 6273) rtp_crash_fix.diff uploaded by opticron (License 6273) rb3753.patch uploaded by mjordan (License 6283) rb3750.patch uploaded by mjordan (License 6283) rb3748.patch uploaded by rmudgett (License 5621) media_format_fixes.diff uploaded by opticron (License 6273) rb3740.patch uploaded by mjordan (License 6283) rb3739.patch uploaded by mjordan (License 6283) rb3734.patch uploaded by mjordan (License 6283) rb3689.patch uploaded by mjordan (License 6283) rb3674.patch uploaded by coreyfarrell (License 5909) rb3671.patch uploaded by coreyfarrell (License 5909) rb3667.patch uploaded by coreyfarrell (License 5909) rb3665.patch uploaded by mjordan (License 6283) rb3625.patch uploaded by coreyfarrell (License 5909) rb3602.patch uploaded by coreyfarrell (License 5909) format_compatibility-2.diff uploaded by file (License 5000) core.diff uploaded by file (License 5000) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419044 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Jonathan Rose	af4cd65143	Channels: Masquerades to automatically move frame/audio hooks ... Whenever possible, audiohooks and framehooks will now be copied over to the channel that the masquerading channel gets cloned into. This should occur for all audiohooks and most framehooks. As a result, in Asterisk 12.5 and up, the AUDIOHOOK_INHERIT function is now deprecated and its behavior is essentially the new default for all audiohooks, plus some additional audiohooks/framehooks. Review: https://reviewboard.asterisk.org/r/3721/ ........ Merged revisions 418914 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418936 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	e977b7936b	Bridging: Allow channels to define bridging hooks ... This patch allows the current owner of a channel to define various feature hooks to be made available once the channel has entered a bridge. This includes any hooks that are setup on the ast_bridge_features struct such as DTMF hooks, bridge event hooks (join, leave, etc.), and interval hooks. Review: https://reviewboard.asterisk.org/r/3649/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417361 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	9cc1a8e893	stasis: Reduce creation of channel snapshots to improve performance ... During some performance testing of Asterisk with AGI, ARI, and lots of Local channels, we noticed that there's quite a hit in performance during channel creation and releasing to the dialplan (ARI continue). After investigating the performance spike that occurs during channel creation, we discovered that we create a lot of channel snapshots that are technically unnecessary. This includes creating snapshots during: * AGI execution * Returning objects for ARI commands * During some Local channel operations * During some dialling operations * During variable setting * During some bridging operations And more. This patch does the following: - It removes a number of fields from channel snapshots. These fields were rarely used, were expensive to have on the snapshot, and hurt performance. This included formats, translation paths, Log Call ID, callgroup, pickup group, and all channel variables. As a result, AMI Status, "core show channel", "core show channelvar", and "pjsip show channel" were modified to either hit the live channel or not show certain pieces of data. While this is unfortunate, the performance gain from this patch is worth the loss in behaviour. - It adds a mechanism to publish a cached snapshot + blob. A large number of publications were changed to use this, including: - During Dial begin - During Variable assignment (if no AMI variables are emitted - if AMI variables are set, we have to make snapshots when a variable is changed) - During channel pickup - When a channel is put on hold/unhold - When a DTMF digit is begun/ended - When creating a bridge snapshot - When an AOC event is raised - During Local channel optimization/Local bridging - When endpoint snapshots are generated - All AGI events - All ARI responses that return a channel - Events in the AgentPool, MeetMe, and some in Queue - Additionally, some extraneous channel snapshots were being made that were unnecessary. These were removed. - The result of ast_hashtab_hash_string is now cached in stasis_cache. This reduces a large number of calls to ast_hashtab_hash_string, which reduced the amount of time spent in this function in gprof by around 50%. #ASTERISK-23811 #close Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/3568/ ........ Merged revisions 416211 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416216 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	2bd6a010a6	Fix build in dev mode due to signed/unsigned mismatch ... ........ Merged revisions 415678 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415679 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	20a14e568f	bridges/bridge_native_rtp: Reconfigure bridge on removal of framehook ... This patch is a re-do of r414122. When r414122 was merged, a major problem with it was uncovered. UNBRIDGE soft hangup flags have a catastrophic effect on the pbx core if they leak out from the bridge layer: the channel gets hung up. With the number of threads involved in a blind transfer, and with the initial patch, it was likely that this would occur. This caused a large number of test failures This patch is nearly identical with the one proposed in r414122, save for the following changes: - We explicitly clear the UNBRIDGE flag when setting an after goto on a channel in a bridge - Defensively, if we encounter an UNBRIDGE flag in the pbx core, we handle it https://reviewboard.asterisk.org/r/3585/ ........ Merged revisions 415443 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415444 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	42a1dee02d	Undo r414123 ... The Test Suite caught a few problems, undoing until those are resolved git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414138 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	17ff4d9282	bridge_native_rtp/bridge_channel: Fix direct media issues due to frame hook ... This patch fixes issues with direct media bridges that occur after a blind transfer. These issues were caught by the (currently failing) pjsip/transfers/blind_transfer/caller_direct_media test. The test currently fails primarily for two reasons: (1) When Bob and Charlie (the transfer target and the transfer destination) enter a bridge together, the framehook remains on the transfer target channel until both channels are in the bridge. As it consumes voice frames, the initial bridge type is a simple bridge. The framehook is removed when both channels are in the bridge; however, this does not currently cause the bridging framework to re-evaluate the bridge. This patch adds a AST_SOFTHANGUP_UNBRIDGE poke to the transfer target channel when a framehook is removed so the bridge can re-evaluate itself. (2) When a channel leaves a native RTP bridge, it may be leaving due to being hung up. Sending a re-INVITE to a channel that is about to be hung up is not nice - in fact, there's a good chance we'll send the BYE request before the channel has had a chance to send back a 200 OK. To be somewhat nicer, this patch adds a function to channel.h that allows the bridging framework to query for exactly why a channel is leaving a bridge via the channel's soft hangup flags. This allows it to only send the re-INVITE if there's a chance the channel will survive the native bridging experience. Review: https://reviewboard.asterisk.org/r/3535/ ........ Merged revisions 414122 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414123 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	d134150be2	framehooks: Add callback for determining if a hook is consuming frames of a specific type. ... In the past framehooks have had no capability to determine what frame types a hook is actually interested in consuming. This has meant that code has had to assume they want all frames, thus preventing native bridging. This change adds a callback which allows a framehook to be queried for whether it is consuming a frame of a specific type. The native RTP bridging module has also been updated to take advantange of this, allowing native bridging to occur when previously it would not. ASTERISK-23497 #comment Reported by: Etienne Lessard ASTERISK-23497 #close Review: https://reviewboard.asterisk.org/r/3522/ ........ Merged revisions 413681 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413682 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	e2ed86e4ca	Undoing framehook support. Issues were uncovered by Bamboo. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413668 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	3b3e4b9b95	framehooks: Add callback for determining if a hook is consuming frames of a specific type. ... In the past framehooks have had no capability to determine what frame types a hook is actually interested in consuming. This has meant that code has had to assume they want all frames, thus preventing native bridging. This change adds a callback which allows a framehook to be queried for whether it is consuming a frame of a specific type. The native RTP bridging module has also been updated to take advantange of this, allowing native bridging to occur when previously it would not. ASTERISK-23497 #comment Reported by: Etienne Lessard ASTERISK-23497 #close Review: https://reviewboard.asterisk.org/r/3522/ ........ Merged revisions 413650 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413651 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	abd3e4040b	Allow Asterisk to compile under GCC 4.10 ... This resolves a large number of compiler warnings from GCC 4.10 which cause the build to fail under dev mode. The vast majority are signed/unsigned mismatches in printf-style format strings. ........ Merged revisions 413586 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 413587 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 413588 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413589 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	03beadb6e9	internal_timing: Remove the option and always make it enabled if a timing module is loaded. ... The masquerade supertest frequently fails because either the local channel chain doesn't completely optimize out or the DTMF handshake doesn't completely get accross. Local channel optimization requires frames flowing to trigger when optimization can happen. When optimization happens the media frame that triggered the optimization is dropped. Sending DTMF requires frames to flow in the other direction for timing purposes while sending nothing. If internal timing is not enabled when MOH is playing, Asterisk switches to received timing when an audio frame is received. With optimization dropping media frames and MOH not sending frames unless it receives frames, occasionaly there are no more frames being passed and the test fails. * The asterisk command line -I option and the asterisk.conf internal_timing option are removed. Asterisk now always uses internal timing when needed if any timing module is loaded. The issue ASTERISK-14861 did this quite awhile ago in v1.4 but effectively is broken if other internal timing modules besides DAHDI are used. The ast_read_generator_actions() now only does received timing if it has no choice for frame generators like MOH, silence, and playback streaming. * Cleaned up some code dealing with frame generators in ast_deactivate_generator(), generator_write_format_change(), ast_activate_generator(), and ast_channel_stop_silence_generator(). * Removed ast_internal_timing_enabled(), AST_OPT_FLAG_INTERNAL_TIMING, and ast_opt_internal_timing. ASTERISK-22846 #close Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/3414/ ........ Merged revisions 411715 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 411716 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 411717 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411724 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	9be438299d	Add some asserts that were handy when looking for a stasis cache problem. ... * Assert if a channel is destroyed but has the snapshot staging flag set. In this case the final channel destruction snapshot would never get taken. * Assert if what we just got out of the stasis cache is not what we were looking for. This assert would have saved several days searching for a bug and a lot of my hair. * Assert if the music on hold message posts could not find the associated channel. A crash will happen later when manager tries to send the MOH AMI message. This assert catches the problem when the stasis message is posted instead of by the thread processing the defective message. * Always generate a backtrace when an ast_assert() fails. Review: https://reviewboard.asterisk.org/r/3411/ ........ Merged revisions 411701 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411702 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	d44aefeef4	Fix stuck channel in ARI through the introduction of synchronous bridge actions. ... Playing back a file to a channel in an ARI bridge would attempt to wait until the playback concluded before returning. The method used involved signaling the waiting thread in the ARI custom playback function. The problem with this is that there were some corner cases that were not accounted for: * If a bridge channel could not be found, then we never would attempt the playback but would still attempt to wait for the playback to complete. * If the bridge playfile action failed to queue, we would still attempt to wait for the playback to complete. * If the bridge playfile action were queued but some circumstance caused the playback not to occur (the bridge dies, the channel is removed from the bridge), then we would never be notified. The solution to this is to move the waiting logic into the bridge code. A new bridge API function is added to queue a synchronous action on a bridge. The waiting thread is notified when the queued frame has been freed, either due to an error occurring or due to successful playback. As a failsafe, the waiting thread has a 10 minute timeout just in case there is a frame leak somewhere. Review: https://reviewboard.asterisk.org/r/3338 ........ Merged revisions 410673 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410684 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Richard Mudgett	f627a0aca0	res_musiconhold.c: Generate MOH start/stop events whenever the MOH stream is started/stopped. ... * Made res_musiconhold.c always post the MusicOnHoldStart/MusicOnHoldStop events when it actually starts/stops the music streams. This allows the events to always happen when MOH starts/stops. The event posting code was moved to the MOH alloc/release routines. * Made channel_do_masquerade() stop any MOH on the original channel before masquerading so the original channel will get a stop event with correct information. * Cleaned up a couple odd codings in moh_files_alloc() and moh_alloc() dealing with the music state variable. (issue ASTERISK-23311) Reported by: Benjamin Keith Ford Review: https://reviewboard.asterisk.org/r/3306/ ........ Merged revisions 410493 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410494 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Scott Griepentrog	80ef9a21b9	uniqueid: channel linkedid, ami, ari object creation with id's ... Much needed was a way to assign id to objects on creation, and much change was necessary to accomplish it. Channel uniqueids and linkedids are split into separate string and creation time components without breaking linkedid propgation. This allowed the uniqueid to be specified by the user interface - and those values are now carried through to channel creation, adding the assignedids value to every function in the chain including the channel drivers. For local channels, the second channel can be specified or left to default to a ;2 suffix of first. In ARI, bridge, playback, and snoop objects can also be created with a specified uniqueid. Along the way, the args order to allocating channels was fixed in chan_mgcp and chan_gtalk, and linkedid is no longer lost as masquerade occurs. (closes issue ASTERISK-23120) Review: https://reviewboard.asterisk.org/r/3191/ ........ Merged revisions 410157 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410158 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago