5597 Commits (6fb811a5905a54a07a901b25f8f3af0ad9d3f7c9)

Author	SHA1	Message	Date
Naveen Albert	0a46be95cb	res_tonedetect: Add option for TONE_DETECT detection to auto stop. ... One of the problems with TONE_DETECT as it was originally written is that if a tone is detected multiple times, it can trigger the redirect logic multiple times as well. For example, if we do an async goto in the dialplan after detecting a tone, because the detector is still active until explicitly disabled, if we detect the tone again, we will branch again and start executing that dialplan a second time. This is rarely ever desired behavior, and can happen if the detector is not removed quickly enough. Add a new option, 'e', which automatically disables the detector once the desired number of matches have been heard. This eliminates the potential race condition where previously the detector would need to be disabled immediately, but doing so quickly enough was not guaranteed. This also allows match criteria to be retained longer if needed, so the detector does not need to be destroyed prematurely. Resolves: #1390 UserNote: The 'e' option for TONE_DETECT now allows detection to be disabled automatically once the desired number of matches have been fulfilled, which can help prevent race conditions in the dialplan, since TONE_DETECT does not need to be disabled after a hit.	1 month ago
George Joseph	02993717b0	res_pjsip_authenticator_digest: Fix SEGV if get_authorization_hdr returns NULL. ... In the highly-unlikely event that get_authorization_hdr() couldn't find an Authorization header in a request, trying to get the digest algorithm would cauase a SEGV. We now check that we have an auth header that matches the realm before trying to get the algorithm from it. Resolves: #GHSA-64qc-9x89-rx5j	2 months ago
Alexei Gradinari	336f6bd627	sorcery: Prevent duplicate objects and ensure missing objects are created on update ... This patch resolves two issues in Sorcery objectset handling with multiple backends: 1. Prevent duplicate objects: When an object exists in more than one backend (e.g., a contact in both 'astdb' and 'realtime'), the objectset previously returned multiple instances of the same logical object. This caused logic failures in components like the PJSIP registrar, where duplicate contact entries led to overcounting and incorrect deletions, when max_contacts=1 and remove_existing=yes. This patch ensures only one instance of an object with a given key is added to the objectset, avoiding these duplicate-related side effects. 2. Ensure missing objects are created: When using multiple writable backends, a temporary backend failure can lead to objects missing permanently from that backend. Currently, .update() silently fails if the object is not present, and no .create() is attempted. This results in inconsistent state across backends (e.g. astdb vs. realtime). This patch introduces a new global option in sorcery.conf: [general] update_or_create_on_update_miss = yes|no Default: no (preserves existing behavior). When enabled: if .update() fails with no data found, .create() is attempted in that backend. This ensures that objects missing due to temporary backend outages are re-synchronized once the backend is available again. Added a new CLI command: sorcery show settings Displays global Sorcery settings, including the current value of update_or_create_on_update_miss. Updated tests to validate both flag enabled/disabled behavior. Fixes: #1289 UserNote: Users relying on Sorcery multiple writable backends configurations (e.g., astdb + realtime) may now enable update_or_create_on_update_miss = yes in sorcery.conf to ensure missing objects are recreated after temporary backend failures. Default behavior remains unchanged unless explicitly enabled.	2 months ago
George Joseph	e33185dedb	chan_websocket: Allow additional URI parameters to be added to the outgoing URI. ... * Added a new option to the WebSocket dial string to capture the additional URI parameters. * Added a new API ast_uri_verify_encoded() that verifies that a string either doesn't need URI encoding or that it has already been encoded. * Added a new API ast_websocket_client_add_uri_params() to add the params to the client websocket session. * Added XML documentation that will show up with `core show application Dial` that shows how to use it. Resolves: #1352 UserNote: A new WebSocket channel driver option `v` has been added to the Dial application that allows you to specify additional URI parameters on outgoing connections. Run `core show application Dial` from the Asterisk CLI to see how to use it.	2 months ago
Sven Kube	f0ac136a8b	ARI: Add command to indicate progress to a channel ... Adds an ARI command to send a progress indication to a channel. DeveloperNote: A new ARI endpoint is available at `/channels/{channelId}/progress` to indicate progress to a channel.	2 months ago
Jose Lopes	ab7ab9c1aa	res_stasis_device_state: Fix delete ARI Devicestates after asterisk restart. ... After an asterisk restart, the deletion of ARI Devicestates didn't return error, but the devicestate was not deleted. Found a typo on populate_cache function that created wrong cache for device states. This bug caused wrong assumption that devicestate didn't exist, since it was not in cache, so deletion didn't returned error. Fixes: #1327	2 months ago
Ben Ford	adde97bff3	res_rtp_asterisk: Don't send RTP before DTLS has negotiated. ... There was no check in __rtp_sendto that prevented Asterisk from sending RTP before DTLS had finished negotiating. This patch adds logic to do so. Fixes: #1260	2 months ago
Mike Bradeen	dce107234a	res_pjsip_diversion: resolve race condition between Diversion header processing and redirect ... Based on the firing order of the PJSIP call-backs on a redirect, it was possible for the Diversion header to not be included in the outgoing 181 response to the UAC and the INVITE to the UAS. This change moves the Diversion header processing to an earlier PJSIP callback while also preventing the corresponding update that can cause a duplicate 181 response when processing the header at that time. Resolves: #1349	2 months ago
Sperl Viktor	c1f24b74d7	cel: Add STREAM_BEGIN, STREAM_END and DTMF event types. ... Fixes: #1280 UserNote: Enabling the tracking of the STREAM_BEGIN and the STREAM_END event types in cel.conf will log media files and music on hold played to each channel. The STREAM_BEGIN event's extra field will contain a JSON with the file details (path, format and language), or the class name, in case of music on hold is played. The DTMF event's extra field will contain a JSON with the digit and the duration in milliseconds.	2 months ago
George Joseph	22d405e900	res_srtp: Add menuselect options to enable AES_192, AES_256 and AES_GCM ... UserNote: Options are now available in the menuselect "Resource Modules" category that allow you to enable the AES_192, AES_256 and AES_GCM cipher suites in res_srtp. Of course, libsrtp and OpenSSL must support them but modern versions do. Previously, the only way to enable them was to set the CFLAGS environment variable when running ./configure. The default setting is to disable them preserving existing behavior.	2 months ago
George Joseph	723410e312	res_stir_shaken: Test for missing semicolon in Identity header. ... ast_stir_shaken_vs_verify() now makes sure there's a semicolon in the Identity header to prevent a possible segfault. Resolves: #GHSA-mrq5-74j5-f5cr	2 months ago
George Joseph	43bf8a4ded	options: Change ast_options from ast_flags to ast_flags64. ... DeveloperNote: The 32-bit ast_options has no room left to accomodate new options and so has been converted to an ast_flags64 structure. All internal references to ast_options have been updated to use the 64-bit flag manipulation macros. External module references to the 32-bit ast_options should continue to work on little-endian systems because the least-significant bytes of a 64 bit integer will be in the same location as a 32-bit integer. Because that's not the case on big-endian systems, we've swapped the bytes in the flags manupulation macros on big-endian systems so external modules should still work however you are encouraged to test.	3 months ago
Alexei Gradinari	3e178dcfd6	res_config_odbc: Prevent Realtime fallback on record-not-found (SQL_NO_DATA) ... This patch fixes an issue in the ODBC Realtime engine where Asterisk incorrectly falls back to the next configured backend when the current one returns SQL_NO_DATA (i.e., no record found). This is a logical error and performance risk in multi-backend configurations. Solution: Introduced CONFIG_RT_NOT_FOUND ((void *)-1) as a special return marker. ODBC Realtime backend now return CONFIG_RT_NOT_FOUND when no data is found. Core engine stops iterating on this marker, avoiding unnecessary fallback. Notes: Other Realtime backends (PostgreSQL, LDAP, etc.) can be updated similarly. This patch only covers ODBC. Fixes: #1305	3 months ago
Sven Kube	9820a62263	resource_channels.c: Don't call ast_channel_get_by_name on empty optional arguments ... `ast_ari_channels_create` and `ast_ari_channels_dial` called the `ast_channel_get_by_name` function with optional arguments. Since 8f1982c4d6, this function logs an error for empty channel names. This commit adds checks for empty optional arguments that are used to call `ast_channel_get_by_name` to prevent these error logs.	3 months ago
Sperl Viktor	5f433e2442	res_agi: Increase AGI command buffer size from 2K to 8K ... Fixes: #1317	3 months ago
Naveen Albert	5de45323c7	res_musiconhold: Remove options that were deprecated in Asterisk 14. ... Commit 9c1f34c7e9 added dedicated options for random sorting functionality and deprecated older options that now duplicated these capabilities. Remove these deprecated options. Resolves: #1296 UpgradeNote: The deprecated random and application=r options have been removed; use sort=random instead.	3 months ago
Naveen Albert	c12f4a886d	res_agi: Remove deprecated DeadAGI application. ... DeadAGI was deprecated 7 years ago, in Asterisk 15, as it duplicates functionality in the AGI app. This removes the application. Resolves: #258 UpgradeNote: The DeadAGI application, which was deprecated in Asterisk 15, has now been removed. The same functionality is available in the AGI app.	3 months ago
Naveen Albert	415daae95f	users.conf: Remove deprecated users.conf integration. ... users.conf was deprecated in Asterisk 21 and is now being removed for Asterisk 23, in accordance with the Asterisk deprecation policy. This consists of: * Removing integration with app_directory, app_voicemail, chan_dahdi, chan_iax2, and AMI. * users.conf was also partially used for res_phoneprov, and this remaining functionality is consolidated to a separate phoneprov_users.conf, used only by res_phoneprov. Resolves: #1292 UpgradeNote: users.conf has been removed and all channel drivers must be configured using their specific configuration files. The functionality previously in users.conf for res_phoneprov is now in phoneprov_users.conf.	3 months ago
George Joseph	5963e624e2	Media over Websocket Channel Driver ... * Created chan_websocket which can exchange media over both inbound and outbound websockets which the driver will frame and time. See http://s.asterisk.net/mow for more information. * res_http_websocket: Made defines for max message size public and converted a few nuisance verbose messages to debugs. * main/channel.c: Changed an obsolete nuisance error to a debug. * ARI channels: Updated externalMedia to include chan_websocket as a supported transport. UserNote: A new channel driver "chan_websocket" is now available. It can exchange media over both inbound and outbound websockets and will both frame and re-time the media it receives. See http://s.asterisk.net/mow for more information. UserNote: The ARI channels/externalMedia API now includes support for the WebSocket transport provided by chan_websocket.	3 months ago
Sean Bright	fa50490b13	res_musiconhold.c: Ensure we're always locked around music state access.	4 months ago
Sean Bright	0e9e381e0d	res_musiconhold.c: Annotate when the channel is locked.	4 months ago
Jaco Kroon	014da68306	res_musiconhold: Appropriately lock channel during start. ... This relates to #829 This doesn't sully solve the Ops issue, but it solves the specific crash there. Further PRs to follow. In the specific crash the generator was still under construction when moh was being stopped, which then proceeded to close the stream whilst it was still in use. Signed-off-by: Jaco Kroon <jaco@uls.co.za>	4 months ago
George Joseph	8b8a8c1475	res_stir_shaken.so: Handle X5U certificate chains. ... The verification process will now load a full certificate chain retrieved via the X5U URL instead of loading only the end user cert. * Renamed crypto_load_cert_from_file() and crypto_load_cert_from_memory() to crypto_load_cert_chain_from_file() and crypto_load_cert_chain_from_memory() respectively. * The two load functions now continue to load certs from the file or memory PEMs and store them in a separate stack of untrusted certs specific to the current verification context. * crypto_is_cert_trusted() now uses the stack of untrusted certs that were extracted from the PEM in addition to any untrusted certs that were passed in from the configuration (and any CA certs passed in from the config of course). Resolves: #1272 UserNote: The STIR/SHAKEN verification process will now load a full certificate chain retrieved via the X5U URL instead of loading only the end user cert.	4 months ago
George Joseph	fe341c2b0f	res_stir_shaken: Add "ignore_sip_date_header" config option. ... UserNote: A new STIR/SHAKEN verification option "ignore_sip_date_header" has been added that when set to true, will cause the verification process to not consider a missing or invalid SIP "Date" header to be a failure. This will make the IAT the sole "truth" for Date in the verification process. The option can be set in the "verification" and "profile" sections of stir_shaken.conf. Also fixed a bug in the port match logic. Resolves: #1251 Resolves: #1271	4 months ago
George Joseph	a14d585127	res_websocket_client: Add more info to the XML documentation. ... Added "see-also" links to chan_websocket and ARI Outbound WebSocket and added an example configuration for each.	4 months ago
Jaco Kroon	0c68306b7c	res_odbc: cache_size option to limit the cached connections. ... Signed-off-by: Jaco Kroon <jaco@uls.co.za> UserNote: New cache_size option for res_odbc to on a per class basis limit the number of cached connections. Please reference the sample configuration for details.	4 months ago
Jaco Kroon	497eba4901	res_odbc: cache_type option for res_odbc. ... This enables setting cache_type classes to a round-robin queueing system rather than the historic stack mechanism. This should result in lower risk of connection drops due to shorter idle times (the first connection to go onto the stack could in theory never be used again, ever, but sit there consuming resources, there could be multiple of these). And with a queue rather than a stack, dead connections are guaranteed to be detected and purged eventually. This should end up better balancing connection_cnt with actual load over time, assuming the database doesn't keep connections open excessively long from it's side. Signed-off-by: Jaco Kroon <jaco@uls.co.za> UserNote: When using res_odbc it should be noted that back-end connections to the underlying database can now be configured to re-use the cached connections in a round-robin manner rather than repeatedly re-using the same connection. This helps to keep connections alive, and to purge dead connections from the system, thus more dynamically adjusting to actual load. The downside is that one could keep too many connections active for a longer time resulting in resource also begin consumed on the database side.	4 months ago
Sean Bright	c7a82711f6	res_pjsip: Fix empty `ActiveChannels` property in AMI responses. ... The logic appears to have been reversed since it was introduced in 05cbf8df. Resolves: #1254	4 months ago
George Joseph	c873f2ae7e	ARI Outbound Websockets ... Asterisk can now establish websocket sessions _to_ your ARI applications as well as accepting websocket sessions _from_ them. Full details: http://s.asterisk.net/ari-outbound-ws Code change summary: * Added an ast_vector_string_join() function, * Added ApplicationRegistered and ApplicationUnregistered ARI events. * Converted res/ari/config.c to use sorcery to process ari.conf. * Added the "outbound-websocket" ARI config object. * Refactored res/ari/ari_websockets.c to handle outbound websockets. * Refactored res/ari/cli.c for the sorcery changeover. * Updated res/res_stasis.c for the sorcery changeover. * Updated apps/app_stasis.c to allow initiating per-call outbound websockets. * Added CLI commands to manage ARI websockets. * Added the new "outbound-websocket" object to ari.conf.sample. * Moved the ARI XML documentation out of res_ari.c into res/ari/ari_doc.xml UserNote: Asterisk can now establish websocket sessions _to_ your ARI applications as well as accepting websocket sessions _from_ them. Full details: http://s.asterisk.net/ari-outbound-ws	4 months ago
George Joseph	5a3164c0b2	res_websocket_client: Create common utilities for websocket clients. ... Since multiple Asterisk capabilities now need to create websocket clients it makes sense to create a common set of utilities rather than making each of those capabilities implement their own. * A new configuration file "websocket_client.conf" is used to store common client parameters in named configuration sections. * APIs are provided to list and retrieve ast_websocket_client objects created from the named configurations. * An API is provided that accepts an ast_websocket_client object, connects to the remote server with retries and returns an ast_websocket object. TLS is supported as is basic authentication. * An observer can be registered to receive notification of loaded or reloaded client objects. * An API is provided to compare an existing client object to one just reloaded and return the fields that were changed. The caller can then decide what action to take based on which fields changed. Also as part of thie commit, several sorcery convenience macros were created to make registering common object fields easier. UserNote: A new module "res_websocket_client" and config file "websocket_client.conf" have been added to support several upcoming new capabilities that need common websocket client configuration.	4 months ago
George Joseph	67360eb671	res_pjsip_messaging.c: Mask control characters in received From display name ... Incoming SIP MESSAGEs will now have their From header's display name sanitized by replacing any characters < 32 (space) with a space. Resolves: #GHSA-2grh-7mhv-fcfw	5 months ago
Sven Kube	3924a828ff	res_audiosocket.c: Add retry mechanism for reading data from AudioSocket ... The added retry mechanism addresses an issue that arises when fragmented TCP packets are received, each containing only a portion of an AudioSocket packet. This situation can occur if the external service sending the AudioSocket data has Nagle's algorithm enabled.	5 months ago
Sven Kube	c4db87ae53	res_audiosocket.c: Set the TCP_NODELAY socket option ... Disable Nagle's algorithm by setting the TCP_NODELAY socket option. This reduces latency by preventing delays caused by packet buffering.	5 months ago
Mike Bradeen	67ab64f773	res_pjsip_nat.c: Do not overwrite transfer host ... When a call is transfered via dialplan behind a NAT, the host portion of the Contact header in the 302 will no longer be over-written with the external NAT IP and will retain the hostname. Fixes: #1141	5 months ago
Naveen Albert	754dea319e	res_pjsip_caller_id: Also parse URI parameters for ANI2. ... If the isup-oli was sent as a URI parameter, rather than a header parameter, it was not being parsed. Make sure we parse both if needed so the ANI2 is set regardless of which type of parameter the isup-oli is sent as. Resolves: #1220	6 months ago
Mike Bradeen	8924258639	stasis/control.c: Set Hangup Cause to No Answer on Dial timeout ... Other Dial operations (dial, app_dial) use Q.850 cause 19 when a dial timeout occurs, but the Dial command via ARI did not set an explicit reason. This resulted in a CANCEL with Normal Call Clearing and corresponding ChannelDestroyed. This change sets the hangup cause to AST_CAUSE_NO_ANSWER to be consistent with the other operations. Fixes: #963 UserNote: A Dial timeout on POST /channels/{channelId}/dial will now result in a CANCEL and ChannelDestroyed with cause 19 / User alerting, no answer. Previously no explicit cause was set, resulting in a cause of 16 / Normal Call Clearing.	6 months ago
Albrecht Oster	a9cd7f9b8d	res_pjproject: Fix DTLS client check failing on some platforms ... Certain platforms (mainly BSD derivatives) have an additional length field in `sockaddr_in6` and `sockaddr_in`. `ast_sockaddr_from_pj_sockaddr()` does not take this field into account when copying over values from the `pj_sockaddr` into the `ast_sockaddr`. The resulting `ast_sockaddr` will have an uninitialized value for `sin6_len`/`sin_len` while the other `ast_sockaddr` (not converted from a `pj_sockaddr`) to check against in `ast_sockaddr_pj_sockaddr_cmp()` has the correct length value set. This has the effect that `ast_sockaddr_cmp()` will always indicate an address mismatch, because it does a bitwise comparison, and all DTLS packets are dropped even if addresses and ports match. `ast_sockaddr_from_pj_sockaddr()` now checks whether the length fields are available on the current platform and sets the values accordingly. Resolves: #505	6 months ago
George Joseph	f302c116b4	Prequisites for ARI Outbound Websockets ... stasis: * Added stasis_app_is_registered(). * Added stasis_app_control_mark_failed(). * Added stasis_app_control_is_failed(). * Fixed res_stasis_device_state so unsubscribe all works properly. * Modified stasis_app_unregister() to unsubscribe from all event sources. * Modified stasis_app_exec to return -1 if stasis_app_control_is_failed() returns true. http: * Added ast_http_create_basic_auth_header(). md5: * Added define for MD5_DIGEST_LENGTH. tcptls: * Added flag to ast_tcptls_session_args to suppress connection log messages to give callers more control over logging. http_websocket: * Add flag to ast_websocket_client_options to suppress connection log messages to give callers more control over logging. * Added username and password to ast_websocket_client_options to support outbound basic authentication. * Added ast_websocket_result_to_str().	6 months ago
George Joseph	4620e76012	ari_websockets: Fix frack if ARI config fails to load. ... ari_ws_session_registry_dtor() wasn't checking that the container was valid before running ao2_callback on it to shutdown registered sessions.	6 months ago
George Joseph	3d5ae0b5e1	ARI: REST over Websocket ... This commit adds the ability to make ARI REST requests over the same websocket used to receive events. For full details on how to use the new capability, visit... https://docs.asterisk.org/Configuration/Interfaces/Asterisk-REST-Interface-ARI/ARI-REST-over-WebSocket/ Changes: * Added utilities to http.c: * ast_get_http_method_from_string(). * ast_http_parse_post_form(). * Added utilities to json.c: * ast_json_nvp_array_to_ast_variables(). * ast_variables_to_json_nvp_array(). * Added definitions for new events to carry REST responses. * Created res/ari/ari_websocket_requests.c to house the new request handlers. * Moved non-event specific code out of res/ari/resource_events.c into res/ari/ari_websockets.c * Refactored res/res_ari.c to move non-http code out of ast_ari_callback() (which is http specific) and into ast_ari_invoke() so it can be shared between both the http and websocket transports. UpgradeNote: This commit adds the ability to make ARI REST requests over the same websocket used to receive events. See https://docs.asterisk.org/Configuration/Interfaces/Asterisk-REST-Interface-ARI/ARI-REST-over-WebSocket/	7 months ago
Florent CHAUVEAU	a5bc39fa32	audiosocket: added support for DTMF frames ... Updated the AudioSocket protocol to allow sending DTMF frames. AST_FRAME_DTMF frames are now forwarded to the server, in addition to AST_FRAME_AUDIO frames. A new payload type AST_AUDIOSOCKET_KIND_DTMF with value 0x03 was added to the protocol. The payload is a 1-byte ascii representing the DTMF digit (0-9,*,#...). UserNote: The AudioSocket protocol now forwards DTMF frames with payload type 0x03. The payload is a 1-byte ascii representing the DTMF digit (0-9,*,#...).	7 months ago
Norm Harrison	4e546c35c7	audiosocket: fix timeout, fix dialplan app exit, server address in logs ... - Correct wait timeout logic in the dialplan application. - Include server address in log messages for better traceability. - Allow dialplan app to exit gracefully on hangup messages and socket closure. - Optimize I/O by reducing redundant read()/write() operations. Co-authored-by: Florent CHAUVEAU <florentch@pm.me>	7 months ago
Mark Murawski	de88e12cb6	chan_pjsip: Add the same details as PJSIPShowContacts to the CLI via 'pjsip show contact' ... CLI 'pjsip show contact' does not show enough information. One must telnet to AMI or write a script to ask Asterisk for example what the User-Agent is on a Contact This feature adds the same details as PJSIPShowContacts to the CLI Resolves: #643	7 months ago
Alexei Gradinari	1f42d20d9c	chan_pjsip: set correct Endpoint Device State on multiple channels ... 1. When one channel is placed on hold, the device state is set to ONHOLD without checking other channels states. In case of AST_CONTROL_HOLD set the device state as AST_DEVICE_UNKNOWN to calculate aggregate device state of all active channels. 2. The current implementation incorrectly classifies channels in use. The only channels that has the states: UP, RING and BUSY are considered as "in use". A channel should be considered "in use" if its state is anything other than DOWN or RESERVED. 3. Currently, if the number of channels "in use" is greater than device_state_busy_at, the system does not set the state to BUSY. Instead, it incorrectly assigns an aggregate device state. The endpoint device state should be BUSY if the number of channels "in use" is greater than or equal to device_state_busy_at. Fixes: #1181	7 months ago
Sean Bright	f918a6fb53	res_config_curl.c: Remove unnecessary warnings. ... Resolves: #1164	7 months ago
Sean Bright	777cd31d22	res_rtp_asterisk.c: Don't truncate spec-compliant `ice-ufrag` or `ice-pwd`. ... RFC 8839[1] indicates that the `ice-ufrag` and `ice-pwd` attributes can be up to 256 bytes long. While we don't generate values of that size, we should be able to accomodate them without truncating. 1. https://www.rfc-editor.org/rfc/rfc8839#name-ice-ufrag-and-ice-pwd-attri	7 months ago
Joshua Elson	2f6578925d	fix: Correct default flag for tcp_keepalive_enable option ... Resolves an issue where the tcp_keepalive_enable option was not properly enabled in the sample configuration due to an incorrect default flag setting. Fixes: #1149	7 months ago
Sean Bright	c7db162844	docs: AMI documentation fixes. ... Most of this patch is adding missing PJSIP-related event documentation, but the one functional change was adding a sorcery to-string handler for endpoint's `redirect_method` which was not showing up in the AMI event details or `pjsip show endpoint <endpoint>` output. The rest of the changes are summarized below: * app_agent_pool.c: Typo fix Epoche -> Epoch. * stasis_bridges.c: Add missing AttendedTransfer properties. * stasis_channels.c: Add missing AgentLogoff properties. * pjsip_manager.xml: - Add missing AorList properties. - Add missing AorDetail properties. - Add missing ContactList properties. - Add missing ContactStatusDetail properties. - Add missing EventDetail properties. - Add missing AuthList properties. - Add missing AuthDetail properties. - Add missing TransportDetail properties. - Add missing EndpointList properties. - Add missing IdentifyDetail properties. * res_pjsip_registrar.c: Add missing InboundRegistrationDetail documentation. * res_pjsip_pubsub.c: - Add missing ResourceListDetail documentation. - Add missing InboundSubscriptionDetail documentation. - Add missing OutboundSubscriptionDetail documentation. * res_pjsip_outbound_registration.c: Add missing OutboundRegistrationDetail documentation.	7 months ago
Maximilian Fridrich	e02de88e4e	Revert "res_rtp_asterisk.c: Set Mark on rtp when timestamp skew is too big" ... This reverts commit f30ad96b3f. The original change was not RFC compliant and caused issues because it set the RTP marker bit in cases when it shouldn't be set. See the linked issue #1135 for a detailed explanation. Fixes: #1135.	7 months ago
Sean Bright	9665903d4b	res_rtp_asterisk.c: Use correct timeout value for T.140 RED timer. ... Found while reviewing #1128	7 months ago