171 Commits (6e3a5d2d48ad6181651635305274fcc7b3e0b996)

Author	SHA1	Message	Date
Kinsey Moore	909ee4bfb9	Refactor extraneous channel events ... This change removes JitterBufStats, ChannelReload, and ChannelUpdate and refactors the following events to travel over Stasis-Core: * LocalBridge * DAHDIChannel * AlarmClear * SpanAlarmClear * Alarm * SpanAlarm * DNDState * MCID * SIPQualifyPeerDone * SessionTimeout Review: https://reviewboard.asterisk.org/r/2627/ (closes issue ASTERISK-21476) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393284 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	6114166237	Refactor chan_dahdi/sig_analog/sig_pri and chan_misdn to use the common transfer functions. ... (closes issue ASTERISK-21523) Reported by: Matt Jordan (closes issue ASTERISK-21524) Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/2600/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390804 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Jason Parker	154fbf8cae	Split Hold event into Hold/Unhold, and move it into core. ... (closes issue ASTERISK-21487) Review: https://reviewboard.asterisk.org/r/2565/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389746 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	06be8463b6	Migrate a large number of AMI events over to Stasis-Core ... This patch moves a number of AMI events over to the Stasis-Core message bus. This includes: * ChanSpyStart/Stop * MonitorStart/Stop * MusicOnHoldStart/Stop * FullyBooted/Reload * All Voicemail/MWI related events In addition, it adds some Stasis-Core and AMI support for generic AMI messages, refactors the message router in AMI to use a single router with topic forwarding for the topics that AMI cares about, and refactors MWI message types and topics to be more name compliant. Review: https://reviewboard.asterisk.org/r/2532 (closes issue ASTERISK-21462) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389733 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	79818112fd	chan_dahdi: Add inband_on_proceeding compatibility option. ... The new inband_on_proceeding option causes Asterisk to assume inband audio may be present when a PROCEEDING message is received. Q.931 Section 5.1.2 says the network cannot assume that the CPE side has attached to the B channel at this time without explicitly sending the progress indicator ie informing the CPE side to attach to the B channel for audio. However, some non-compliant ISDN switches send a PROCEEDING without the progress indicator ie indicating inband audio is available and assume that the CPE device has connected the media path for listening to ringback and other messages. ASTERISK-17834 which causes this issue was dealing with a non-compliant network switch. (closes issue ASTERISK-21151) Reported by: Gianluca Merlo Tested by: rmudgett ........ Merged revisions 384685 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 384689 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384696 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	1a2a4578d2	Convert MWI state message type to the new stasis naming convention ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384219 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	23f363fcb1	Set the CALLERID(dnid-num-plan) for incoming ISDN calls. ... The CALLEDTON channel variable is set for incoming ISDN calls to the lower 7 bits of the Q.931 type-of-number/numbering-plan octet. The CALLERID(dnid-num-plan) should have the same value. (closes issue ASTERISK-21248) Reported by: rmudgett ........ Merged revisions 383796 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 383798 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383799 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	99aa02d17f	Transition MWI to Stasis-core ... Remove MWI's dependency on the event system by moving it to Stasis-core. This also introduces forwarding topic pools in Stasis-core which aggregate many dynamically allocated topics into a single primary topic. Review: https://reviewboard.asterisk.org/r/2368/ (closes issue ASTERISK-21097) Patch-by: Kinsey Moore git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383284 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Mark Michelson	f2bb9afe17	Multiple revisions 375993-375994 ... ........ r375993 | mmichelson | 2012-11-07 11:01:13 -0600 (Wed, 07 Nov 2012) | 30 lines Fix misuses of timeouts throughout the code. Prior to this change, a common method for determining if a timeout was reached was to call a function such as ast_waitfor_n() and inspect the out parameter that told how many milliseconds were left, then use that as the input to ast_waitfor_n() on the next go-around. The problem with this is that in some cases, submillisecond timeouts can occur, resulting in the out parameter not decreasing any. When this happens thousands of times, the result is that the timeout takes much longer than intended to be reached. As an example, I had a situation where a 3 second timeout took multiple days to finally end since most wakeups from ast_waitfor_n() were under a millisecond. This patch seeks to fix this pattern throughout the code. Now we log the time when an operation began and find the difference in wall clock time between now and when the event started. This means that sub-millisecond timeouts now cannot play havoc when trying to determine if something has timed out. Part of this fix also includes changing the function ast_waitfor() so that it is possible for it to return less than zero when a negative timeout is given to it. This makes it actually possible to detect errors in ast_waitfor() when there is no timeout. (closes issue ASTERISK-20414) reported by David M. Lee Review: https://reviewboard.asterisk.org/r/2135/ ........ r375994 | mmichelson | 2012-11-07 11:08:44 -0600 (Wed, 07 Nov 2012) | 3 lines Remove some debugging that accidentally made it in the last commit. ........ Merged revisions 375993-375994 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 375995 from http://svn.asterisk.org/svn/asterisk/branches/10 ........ Merged revisions 376014 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376015 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Mark Michelson	fdfb3ae5fa	Allow for redirecting reasons to be set to arbitrary strings. ... This allows for the REDIRECTING dialplan function to be used to set the reason to any string. The SIP channel driver has been modified to set the redirecting reason string to the value received in a Diversion header. In addition, SIP 480 response reason text will set the redirecting reason as well. (closes issue AST-942) reported by Malcolm Davenport (closes issue AST-943) reported by Malcolm Davenport Review: https://reviewboard.asterisk.org/r/2101 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373701 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	8b933196e9	Fix loss of MOH on an ISDN channel when parking a call for the second time. ... Using the AMI redirect action to take an ISDN call out of a parking lot causes the MOH state to get confused. The redirect action does not take the call off of hold. When the call is subsequently parked again, the call no longer hears MOH. * Make chan_dahdi/sig_pri restart MOH on repeated AST_CONTROL_HOLD frames if it is already in a state where it is supposed to be sending MOH. The MOH may have been stopped by other means. (Such as killing the generator.) This simple fix is done rather than making the AMI redirect action post an AST_CONTROL_UNHOLD unconditionally when it redirects a channel and thus potentially breaking something with an unexpected AST_CONTROL_UNHOLD. (closes issue ABE-2873) Patches: jira_abe_2873_c.3_bier.patch (license #5621) patch uploaded by rmudgett ........ Merged revisions 372521 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier ........ Merged revisions 372522 from http://svn.asterisk.org/svn/asterisk/branches/10 ........ Merged revisions 372523 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372524 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	76d642ff69	Add HANGUPCAUSE information to callee channels ... This adds HANGUPCAUSE information to called channels so that hangup handlers can, in conjunction with predial dialplan execution, access the hangupcause information when the dialed channel hangs up on a one-to-one basis instead of a many-to-one basis as with HANGUPCAUSE usage on the caller channel. Review: https://reviewboard.asterisk.org/r/2069/ (closes issue ASTERISK-20198) ........ Merged revisions 371258 from http://svn.asterisk.org/svn/asterisk/branches/11 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371259 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	fb6238899b	Add private representation of caller, connected and redirecting party ids. ... This patch adds the feature "Private representation of caller, connected and redirecting party ids", as previously discussed with us (DATUS) and Digium. 1. Feature motivation Until now it is quite difficult to modify a party number or name which can only be seen by exactly one particular instantiated technology channel subscriber. One example where a modified party number or name on one channel is spread over several channels are supplementary services like call transfer or pickup. To implement these features Asterisk internally copies caller and connected ids from one channel to another. Another example are extension subscriptions. The monitoring entities (watchers) are notified of state changes and - if desired - of party numbers or names which represent the involving call parties. One major feature where a private representation of party names is essentially needed, i.e. where a party name shall be exclusively signaled to only one particular user, is a private user-specific name resolution for party numbers. A lookup in a private destination-dependent telephone book shall provide party names which cannot be seen by any other user at any time. 2. Feature Description This feature comes along with the implementation of additional private party id elements for caller id, connected id and redirecting ids inside Asterisk channels. The private party id elements can be read or set by the user using Asterisk dialplan functions. When a technology channel is initiating a call, receives an internal connected-line update event, or receives an internal redirecting update event, it merges the corresponding public id with the private id to create an effective party id. The effective party id is then used for protocol signaling. The channel technologies which initially support the private id representation with this patch are SIP (chan_sip), mISDN (chan_misdn) and PRI (chan_dahdi). Once a private name or number on a channel is set and (implicitly) made valid, it is generally used for any further protocol signaling until it is rewritten or invalidated. To simplify the invalidation of private ids all internally generated connected/redirecting update events and also all connected/redirecting update events which are generated by technology channels -- receiving regarding protocol information - automatically trigger the invalidation of private ids. If not using the private party id representation feature at all, i.e. if using only the 'regular' caller-id, connected and redirecting related functions, the current characteristic of Asterisk is not affected by the new extended functionality. 3. User interface Description To grant access to the private name and number representation from the Asterisk dialplan, the CALLERID, CONNECTEDLINE and REDIRECTING dialplan functions are extended by the following data types. The formats of these data types are equal to the corresponding regular 'non-private' already existing data types: CALLERID: priv-all priv-name priv-name-valid priv-name-charset priv-name-pres priv-num priv-num-valid priv-num-plan priv-num-pres priv-subaddr priv-subaddr-valid priv-subaddr-type priv-subaddr-odd priv-tag CONNECTEDLINE: priv-name priv-name-valid priv-name-pres priv-name-charset priv-num priv-num-valid priv-num-pres priv-num-plan priv-subaddr priv-subaddr-valid priv-subaddr-type priv-subaddr-odd priv-tag REDIRECTING: priv-orig-name priv-orig-name-valid priv-orig-name-pres priv-orig-name-charset priv-orig-num priv-orig-num-valid priv-orig-num-pres priv-orig-num-plan priv-orig-subaddr priv-orig-subaddr-valid priv-orig-subaddr-type priv-orig-subaddr-odd priv-orig-tag priv-from-name priv-from-name-valid priv-from-name-pres priv-from-name-charset priv-from-num priv-from-num-valid priv-from-num-pres priv-from-num-plan priv-from-subaddr priv-from-subaddr-valid priv-from-subaddr-type priv-from-subaddr-odd priv-from-tag priv-to-name priv-to-name-valid priv-to-name-pres priv-to-name-charset priv-to-num priv-to-num-valid priv-to-num-pres priv-to-num-plan priv-to-subaddr priv-to-subaddr-valid priv-to-subaddr-type priv-to-subaddr-odd priv-to-tag Reported by: Thomas Arimont Review: https://reviewboard.asterisk.org/r/2030/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371120 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	18d5041981	Use better libss7 detection test and move libpri compile test. ... ........ Merged revisions 371012 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 371013 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371030 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Richard Mudgett	35bf5efeaf	Convert sig_pri to use a global callback table. ... git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370893 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	9b16c8b0f6	Clean up and ensure proper usage of alloca() ... This replaces all calls to alloca() with ast_alloca() which calls gcc's __builtin_alloca() to avoid BSD semantics and removes all NULL checks on memory allocated via ast_alloca() and ast_strdupa(). (closes issue ASTERISK-20125) Review: https://reviewboard.asterisk.org/r/2032/ Patch-by: Walter Doekes (wdoekes) ........ Merged revisions 370642 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 370643 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370655 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Kinsey Moore	cb9756daa2	Add hangupcause translation support ... The HANGUPCAUSE hash (trunk only) meant to replace SIP_CAUSE has now been replaced with the HANGUPCAUSE and HANGUPCAUSE_KEYS dialplan functions to better facilitate access to the AST_CAUSE translations for technology-specific cause codes. The HangupCauseClear application has also been added to remove this data from the channel. (closes issue SWP-4738) Review: https://reviewboard.asterisk.org/r/2025/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370316 65c4cc65-6c06-0410-ace0-fbb531ad65f3	13 years ago
Matthew Jordan	9bc2127d7b	Fix validation errors when producing documentation using default build script ... The awk script parses out the first instance of the DOCUMENTATION tag that it finds within a file. If a file did not previously have a DOCUMENTATION tag but received one due to it having an AMI event, then the XML fragment associated with the AMI event was erroneously placed in the resulting XML file. Without the python scripts, these XML fragments will not validate. This patch adds DOCUMENTATION tags at the top of those files that did not previously have them to prevent the awk script from pulling AMI event documentation. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369910 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Matthew Jordan	2ffae5745d	Add some additional documentation for core AMI events ... This patch adds some basic documentation for a number of modules. This includes core source files in Asterisk (those in main), as well as chan_agent, chan_dahdi, chan_local, sig_analog, and sig_pri. The DTD has also been updated to allow referencing of AMI commands. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369905 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Kinsey Moore	db59a3f123	Remove unnecessary generation of informational cause frames ... It is not necessary to generate information cause code frames on every protocol event that occurs. This removes all the instances where the frame was not conveying a cause code and was instead just conveying a protocol-specific message. This also corrects the generation of the message associated with disconnects for MFC/R2 to use the MFC/R2 specific text for the disconnect cause. git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369765 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Jonathan Rose	5eb94d7ebb	Unique Call ID logging Phases III and IV ... Adds call ID logging changes to specific channel drivers that weren't handled handled in phase II of Call ID Logging. Also covers logging for threads for threads created by systems that may be involved with many different calls. Extra special thanks to Richard for rigorous review of chan_dahdi and its various signalling modules. review: https://reviewboard.asterisk.org/r/1927/ review: https://reviewboard.asterisk.org/r/1950/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369414 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Kinsey Moore	1ab47ac137	Add HANGUPCAUSE hash support for analog and PRI DAHDI subtechs ... This is part of the DAHDI support for the Asterisk 11 "Who Hung Up?" project and covers the implementation for the technologies implemented in sig_analog.c and sig_pri.c. Tested on a local machine to verify protocol and cause information is available. Review: https://reviewboard.asterisk.org/r/1953/ (issue SWP-4222) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369185 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Kevin P. Fleming	166b4e2b30	Multiple revisions 369001-369002 ... ........ r369001 | kpfleming | 2012-06-15 10:56:08 -0500 (Fri, 15 Jun 2012) | 11 lines Add support-level indications to many more source files. Since we now have tools that scan through the source tree looking for files with specific support levels, we need to ensure that every file that is a component of a 'core' or 'extended' module (or the main Asterisk binary) is explicitly marked with its support level. This patch adds support-level indications to many more source files in tree, but avoids adding them to third-party libraries that are included in the tree and to source files that don't end up involved in Asterisk itself. ........ r369002 | kpfleming | 2012-06-15 10:57:14 -0500 (Fri, 15 Jun 2012) | 3 lines Add a script to enable finding source files without support-levels defined. ........ Merged revisions 369001-369002 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 369005 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369013 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	e65ad34770	Fix deadlock when executing CLI "pri show channels" and "ss7 show channels" commands. ... * Fix sig_pri_lock_owner() to avoid deadlock properly. * Code pri_grab() better. * Fix sig_ss7_lock_owner() to avoid deadlock properly. * Code ss7_grab() better. (closes issue ASTERISK-19854) Reported by: Jaxon Patches: jira_asterisk_19854_v1.8.6.patch (license #5621) patch uploaded by rmudgett (Modified to do the same thing to sig_ss7) Tested by: Jaxon ........ Merged revisions 367976 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 367978 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367979 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	af39a4374e	Make DAHDISendCallreroutingFacility wait 5 seconds for a reply before disconnecting the call. ... Some switches may not handle the call-deflection/call-rerouting message if the call is disconnected too soon after being sent. Asteisk was not waiting for any reply before disconnecting the call. * Added a 5 second delay before disconnecting the call to wait for a potential response if the peer does not disconnect first. (closes issue ASTERISK-19708) Reported by: mehdi Shirazi Patches: jira_asterisk_19708_v1.8.patch (license #5621) patch uploaded by rmudgett Tested by: rmudgett ........ Merged revisions 363730 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 363734 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363740 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	d2ac624b87	Clear ISDN channel resetting state if the peer continues to use it. ... Some ISDN switches occasionally fail to send a RESTART ACKNOWLEDGE in response to a RESTART request. * Made the second SETUP received after sending a RESTART request clear the channel resetting state as if the peer had sent the expected RESTART ACKNOWLEDGE before continuing to process the SETUP. The peer may not be sending the expected RESTART ACKNOWLEDGE. (issue ASTERISK-19608) (issue AST-844) (issue AST-815) Patches: jira_ast_815_v1.8.patch (license #5621) patch uploaded by rmudgett (modified) ........ Merged revisions 363687 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 363688 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363689 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	73f48997f9	Add original party id and reason support. ... ISDN ETSI PTP and Q.SIG (And SS7 in future) have support for reporting who was the original redirecting party of a call. * Added support for the original redirecting party and reason to the REDIRECTING function and the system core as well as to the stubbed locations in sig_pri.c. Review: https://reviewboard.asterisk.org/r/1829/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362779 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	c7cb03a975	Add ability to ignore layer 1 alarms for BRI PTMP lines. ... Several telcos bring the BRI PTMP layer 1 down when the line is idle. When layer 1 goes down, Asterisk cannot make outgoing calls. Incoming calls could fail as well because the alarm processing is handled by a different code path than the Q.931 messages. * Add the layer1_presence configuration option to ignore layer 1 alarms when the telco brings layer 1 down. This option can be configured by span while the similar DAHDI driver teignorered=1 option is system wide. This option unlike layer2_persistence does not require libpri v1.4.13 or newer. Related to JIRA AST-598 JIRA ABE-2845 ........ Merged revisions 362428 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 362429 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362430 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	721f92058f	Make number not available presentation also set screening to network provided. ... Q.951 indicates that when the presentation indicator is "Number not available due to interworking" for a number then the screening indicator field should be "Network provided". * Made ast_party_id_presentation() return AST_PRES_NUMBER_NOT_AVAILABLE when the presentation is "Number not available due to interworking". This fix makes Asterisk consistent and it also makes it consistent with earlier branches as far as this presentation value is concerned. * Made pri_to_ast_presentation() and ast_to_pri_presentation() conversions handle the "Number not available due to interworking" case better in sig_pri.c. This change is possible because the minimum required libpri version (v1.4.11) has the necessary defines in libpri.h. ........ Merged revisions 360309 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 360310 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360311 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	a22b56235b	Add ability for chan_dahdi ISDN to block connected line updates per span. ... Added new chan_dahdi.conf colp_send option parameter to block connected line updates per span. (closes issue ASTERISK-17025) Reported by: Michael Smith git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358997 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	9926662aba	Remove ISDN hold restriction for non-bridged calls. ... The check if an ISDN call is bridged before it could be placed on hold is not necessary and is overly restrictive. The check was originally done to prevent problems with call transfers in case a user tried to transfer a call connected to an application to another call connected to an application. The ISDN transfer code has not required this restriction for quite some time because ECT could transfer any two active calls to each other. * Remove ISDN hold restriction for calls connected to applications. * Made ast_waitfordigit_full() ignore AST_CONTROL_HOLD and AST_CONTROL_UNHOLD instead of generating a warning message. (closes issue ASTERISK-19388) Reported by: Birger Harzenetter Tested by: rmudgett ........ Merged revisions 357894 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 357895 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357896 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Terry Wilson	0e5c761c28	Opaquify ast_channel typedefs, fd arrays, and softhangup flag ... Review: https://reviewboard.asterisk.org/r/1784/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357721 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Terry Wilson	a9d607a357	Opaquify ast_channel structs and lists ... Review: https://reviewboard.asterisk.org/r/1773/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357542 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	764d2ccae2	Use more reasonable cause code when rejecting incoming call waiting calls. ... (closes issue ASTERISK-19397) Reported by: Birger Harzenetter Patches: nochannel-cause.patch (license #5870) patch uploaded by Birger Harzenetter ........ Merged revisions 357407 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 357408 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357409 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Terry Wilson	57f42bd74f	ast_channel opaquification of pointers and integral types ... Review: https://reviewboard.asterisk.org/r/1753/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356042 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Alec L Davis	a4f6d96b2e	push 'outgoing' flag from sig_XXX up to chan_dahdi ... 'p->outgoing' in chan_dahdi and sig_analog wern't kept in sync, particulary FXS ast_hangup didn't clear the 'outgoing' flag. sig_pri and sig_ss7 were keeping 'outgoing' flag insync. Now provides a callback for all the low level sig_XXX modules. (issue ASTERISK-19316) alecdavis (license 585) Reported by: Jeremy Pepper Tested by: alecdavis Review: https://reviewboard.asterisk.org/r/1747/ ........ Merged revisions 355850 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 355851 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355852 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Terry Wilson	34c55e8e7c	Opaquify char * and char[] in ast_channel ... Review: https://reviewboard.asterisk.org/r/1733/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354968 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	63c5eaee43	Restore the 'w' modifier support for ISDN spans. Dial(DAHDI/g0/1234w888) ... This feature also causes the sending complete ie to be sent for switch types that do not automatically send the ie. (EuroISDN/ETSI) The main difference between dialing Dial(DAHDI/g0/1234w888) and Dial(DAHDI/g0/1234,,D(888)) is the sending of the sending complete ie. (closes issue ASTERISK-19176) Reported by: rmudgett Tested by: rmudgett ........ Merged revisions 353867 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 353868 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353872 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	23bc964e1c	Constify some more channel driver technology callback parameters. ... Review: https://reviewboard.asterisk.org/r/1707/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353685 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Terry Wilson	99cae5b750	Opaquify channel stringfields ... Continue channel opaque-ification by wrapping all of the stringfields. Eventually, we will restrict what can actually set these variables, but the purpose for now is to hide the implementation and keep people from adding code that directly accesses the channel structure. Semantic changes will follow afterward. Review: https://reviewboard.asterisk.org/r/1661/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@352348 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Terry Wilson	04da92c379	Replace direct access to channel name with accessor functions ... There are many benefits to making the ast_channel an opaque handle, from increasing maintainability to presenting ways to kill masquerades. This patch kicks things off by taking things a field at a time, renaming the field to '__do_not_use_${fieldname}' and then writing setters/getters and converting the existing code to using them. When all fields are done, we can move ast_channel to a C file from channel.h and lop off the '__do_not_use_'. This patch sets up main/channel_interal_api.c to be the only file that actually accesses the ast_channel's fields directly. The intent would be for any API functions in channel.c to use the accessor functions. No more monkeying around with channel internals. We should use our own APIs. The interesting changes in this patch are the addition of channel_internal_api.c, the moving of the AST_DATA stuff from channel.c to channel_internal_api.c (note: the AST_DATA stuff will have to be reworked to use accessor functions when ast_channel is really opaque), and some re-working of the way channel iterators/callbacks are handled so as to avoid creating fake ast_channels on the stack to pass in matching data by directly accessing fields (since "name" is a stringfield and the fake channel doesn't init the stringfields, you can't use the ast_channel_name_set() function). I went with ast_channel_name(chan) for a getter, and ast_channel_name_set(chan, name) for a setter. The majority of the grunt-work for this change was done by writing a semantic patch using Coccinelle ( http://coccinelle.lip6.fr/ ). Review: https://reviewboard.asterisk.org/r/1655/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350223 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	4a125f45a0	Remove dead code since pri_grab() can never fail. ... Dead code makes programmers sick. I am sick of looking at it. ........ Merged revisions 345546 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 345558 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@345559 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	bd4f81b51f	Fix typo in sig_pri using wrong structure name. ... It is fortunate that the typo does not alter generated code since the e->restart.channel and e->ring.channel members are in the same position. (closes issue ASTERISK-18868) Reported by: zvision Patches: sig_pri.c.diff (License #5755) patch uploaded by zvision ........ Merged revisions 345370 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 345371 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@345375 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	6cf08ad550	Change D-channel warning to be less confusing on non-NFAS setups. ... The "No D-channels available! Using Primary channel as D-channel anyway!" WARNING message has been confusing on non-NFAS setups. The message refers to things that are NFAS specific. * Changed the warning to several different warnings to be more accurate for the situation and less confusing as a result: "No D-channels up! Switching selected D-channel from X to Y.", "No D-channels up!", and "D-channel is down!". ........ Merged revisions 342484 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 342485 from http://svn.asterisk.org/svn/asterisk/branches/10 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@342486 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	50350a47ea	Merged revisions 338323 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/10 ................ r338323 | rmudgett | 2011-09-28 17:36:57 -0500 (Wed, 28 Sep 2011) | 12 lines Merged revisions 338322 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r338322 | rmudgett | 2011-09-28 17:35:52 -0500 (Wed, 28 Sep 2011) | 5 lines Make duplicate call ptr warning message more helpful. * Adds the value of the call ptr to the duplicate call ptr message to help trace why there is a duplicate call ptr. ........ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@338324 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	e39f6bba33	Merged revisions 337721 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/10 ................ r337721 | rmudgett | 2011-09-22 16:37:41 -0500 (Thu, 22 Sep 2011) | 25 lines Merged revisions 337720 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r337720 | rmudgett | 2011-09-22 16:29:46 -0500 (Thu, 22 Sep 2011) | 18 lines Made ISDN not add numbering plan prefix strings to empty numbers. When the Caller-ID is restricted, the expected behavior is for the Caller-ID to be blank. In chan_dahdi, the national prefix is placed onto the Caller-ID number even if it is restricted (empty) causing the Caller-ID to be the national prefix rather than blank. This behavior was lost when sig_pri was extracted from chan_dahdi. * Made not add prefix strings to empty connected line, calling, and ANI number strings. (closes issue ASTERISK-18577) Reported by: Kris Shaw Patches: jira_asterisk_18577_v1.8.patch (license #5621) patch uploaded by rmudgett Tested by: Kris Shaw ........ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337722 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	0f9330b58c	Merged revisions 336570 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/10 ................ r336570 | rmudgett | 2011-09-19 10:32:00 -0500 (Mon, 19 Sep 2011) | 11 lines Merged revisions 336569 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r336569 | rmudgett | 2011-09-19 10:25:34 -0500 (Mon, 19 Sep 2011) | 4 lines Rework sig_pri_hangup() to be simpler and clearer. JIRA AST-675 ........ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@336571 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Matthew Jordan	8b5ba33fe0	Merged revisions 335078 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/10 ................ r335078 | mjordan | 2011-09-09 11:27:01 -0500 (Fri, 09 Sep 2011) | 29 lines Merged revisions 335064 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r335064 | mjordan | 2011-09-09 11:09:09 -0500 (Fri, 09 Sep 2011) | 23 lines Updated SIP 484 handling; added Incomplete control frame When a SIP phone uses the dial application and receives a 484 Address Incomplete response, if overlapped dialing is enabled for SIP, then the 484 Address Incomplete is forwarded back to the SIP phone and the HANGUPCAUSE channel variable is set to 28. Previously, the Incomplete application dialplan logic was automatically triggered; now, explicit dialplan usage of the application is required. Additionally, this patch adds a new AST_CONTOL_FRAME type called AST_CONTROL_INCOMPLETE. If a channel driver receives this control frame, it is an indication that the dialplan expects more digits back from the device. If the device supports overlap dialing it should attempt to notify the device that the dialplan is waiting for more digits; otherwise, it can handle the frame in a manner appropriate to the channel driver. (closes issue ASTERISK-17288) Reported by: Mikael Carlsson Tested by: Matthew Jordan Review: https://reviewboard.asterisk.org/r/1416/ ........ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@335079 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	265102faf8	Merged revisions 332265 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/10 ................ r332265 | rmudgett | 2011-08-17 11:01:29 -0500 (Wed, 17 Aug 2011) | 33 lines Merged revisions 332264 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ........ r332264 | rmudgett | 2011-08-17 10:51:08 -0500 (Wed, 17 Aug 2011) | 26 lines Outgoing BRI calls fail when using Asterisk 1.8 with HA8, HB8, and B410P cards. France Telecom brings layer 2 and layer 1 down on BRI lines when the line is idle. When layer 1 goes down Asterisk cannot make outgoing calls and the HA8 and HB8 cards also get IRQ misses. The inability to make outgoing calls is because the line is in red alarm and Asterisk will not make calls over a line it considers unavailable. The IRQ misses for the HA8 and HB8 card are because the hardware is switching clock sources from the line which just brought layer 1 down to internal timing. There is a DAHDI option for the B410P card to not tell Asterisk that layer 1 went down so Asterisk will allow outgoing calls: "modprobe wcb4xxp teignored=1". There is a similar DAHDI option for the HA8 and HB8 cards: "modprobe wctdm24xxp bri_teignored=1". Unfortunately that will not clear up the IRQ misses when the telco brings layer 1 down. * Add layer 2 persistence option to customize the layer 2 behavior on BRI PTMP lines. The new option has three settings: 1) Use libpri default layer 2 setting. 2) Keep layer 2 up. Bring layer 2 back up when the peer brings it down. 3) Leave layer 2 down when the peer brings it down. Layer 2 will be brought up as needed for outgoing calls. JIRA AST-598 ........ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332270 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago
Richard Mudgett	a3ba55e7c7	Merged revisions 330051 via svnmerge from ... https://origsvn.digium.com/svn/asterisk/branches/10 ................ r330051 | rmudgett | 2011-07-28 12:10:37 -0500 (Thu, 28 Jul 2011) | 29 lines Merged revisions 330050 via svnmerge from https://origsvn.digium.com/svn/asterisk/branches/1.8 ................ r330050 | rmudgett | 2011-07-28 12:04:24 -0500 (Thu, 28 Jul 2011) | 22 lines Merged revisions 330033 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier .......... r330033 | rmudgett | 2011-07-28 11:26:38 -0500 (Thu, 28 Jul 2011) | 15 lines Datacalls with B410P fail. Incoming and outgoing call legs of a data call are using different formats: a-law, u-law. When the call is bridged, the media stream is run through translation to convert the media formats. The translation is bad for data calls. * Make incoming call that does not explicitly specify u-law or a-law use the DAHDI channel's default law. The outgoing call always uses the default law from the DAHDI channel. (closes issue ABE-2800) Patches: jira_abe_2800_companding.patch (license #5621) patch uploaded by rmudgett .......... ................ ................ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@330052 65c4cc65-6c06-0410-ace0-fbb531ad65f3	14 years ago