If you use the safe_asterisk script, it uses hardcoded defaults before
running configurable values from /etc/asterisk/startup.d. The hardcoded
default has TTY=9. Some containerized environments don't have such a
TTY, and safe_asterisk would stop.
The custom configuration from /etc/asterisk/startup.d/* isn't read until
after it stopped, so changing TTY in a custom config did not help.
This changeset changes safe_asterisk to continue if the TTY setting was
untouched and /dev/tty9 and /dev/vc/9 aren't found.
Change-Id: I2c7cdba549b77f418a0af4cb1227e8e6fe4148fc
When using the migration script sip_to_pjsip.py, and your sip.conf is
configured with bindaddr=::, two transports are written to pjsip.conf, one for
0.0.0.0 (IPv4) and one for [::] (IPv6). That way, PJProject listens on the IPv4
and IPv6 wildcards; a IPv4/IPv6 Dual Stack configuration on a single interface
like in chan_sip.
Furthermore, the script internal functions "build_host" and "split_hostport"
did not parse Literal IPv6 addresses as expected (like [::1]:5060). This change
makes sure, even such addresses are parsed correctly.
ASTERISK-26309
Change-Id: Ia4799a0f80fc30c0550fc373efc207c3330aeb48
When using the migration script sip_to_pjsip.py, cert_file was not migrated to
pjsip.conf. A previous change regarding this contained a copy/paste error.
ASTERISK-22374
Change-Id: I0fa72e9412117d53b4284fc6b83fa5b2b95ba03b
A recent update had a copy/paste error where the unused variable 'val' was
being passed to the set_value function instead of the 'method' value itself.
This patch passes in the right variable.
ASTERISK-22374
Change-Id: I895b7b3779ce4442bc58b8ec40d59dd29bb43f06
When using the migration script sip_to_pjsip.py and tlsclientmethod is not set
in sip.conf, the default value of chan_sip (sslv23) is copied to pjsip.conf, to
overwrite the default of the PJProject (tlsv1). This makes sure, res_pjsip is
offering/using not just TLSv1.0 but TLSv1.2 as well.
ASTERISK-22374
Change-Id: Ie530a3dae9926ae14f3920a21be1e2edb15bda4f
When using the migration script sip_to_pjsip.py, no section of type=system or
type=general were created. Therefore the keys compactheaders, timerb, timert1,
and useragent were not migrated to pjsip.conf.
ASTERISK-22374
Change-Id: I318a453843227ea36bf130d392d4abd7bd26b5a1
When using the migration script sip_to_pjsip.py, session-timers=accept and
session-timers=refuse were mapped to wrong values.
ASTERISK-22374
Change-Id: Ie4e90d5f6a29aff07837b7fe5bc8aea5fb6fc092
When using the migration script sip_to_pjsip.py, now the (mandatory) username is
written to pjsip.conf, even if there was no (optional) authname in the register
string in sip.conf.
ASTERISK-22374
Change-Id: Ie53e1997104cd2674821688b8a8247249f5e156f
When using the migration script sip_to_pjsip.py and the register string
started with a transport in sip.conf - like tls://... - register was not parsed
correctly and therefore not migrated correctly to pjsip.conf.
ASTERISK-22374
Change-Id: I44c12104eea2bd8558ada6d25d77edfecd92edd2
When using the migration script sip_to_pjsip.py, those keys got missing. These
keys might appear several times and the function "merge_value" tried to collect
those. However, because these keys have different names in sip.conf and
pjsip.conf, "merge_value" was not able to find the new key name in sip.conf.
This change lets "merge_value" search with the old key name in sip.conf and
write with the new key name in pjsip.conf.
ASTERISK-22374
Change-Id: Ie53c5278ae6f1cb8fa7e96c5289877d46981d9d2
When using the migration script sip_to_pjsip.py, the externhost or externip of
sip.conf were erroneously written to Endpoints instead to Transports.
ASTERISK-22374
Change-Id: I2c5873386cfc388899fa9cf2368639dd12f1b8e4
When using the migration script sip_to_pjsip.py, defaultexpiry, maxexpiry, and
minexpiry were not migrated to pjsip.conf.
ASTERISK-22374
Change-Id: I007fbf543dcadc96fc3ed71c54da502bcb209b7b
When using the migration script sip_to_pjsip.py, encryption=yes got missing and
media_encryption=sdes was not written to pjsip.conf, because of a typo.
ASTERISK-22374
Change-Id: I0fc3e55dc512a57603ae0fef41baacccf2a35c05
When using the migration script sip_to_pjsip.py, both tos_sip and cos_sip got
missed, because of a typo. Therefore, cos and tos were not written to
pjsip.conf. Furthermore, that revealed a misuse of an internal function, caused
by a copy-and-paste error.
ASTERISK-22374
Change-Id: Id245ebadf70ab9776eb280c026288540af3af5c2
When using the migration script sip_to_pjsip.py, cert_file and ca_list_path were
not migrated to pjsip.conf.
ASTERISK-22374
Change-Id: I4612877d190b7f86a48698cefbf5c4db6c265825
contact_user, when specified on an endpoint, will override the user
portion of the Contact header on outgoing requests.
Change-Id: Icd4ebfda2f2e44d3ac749d0b4066630e988407d4
A new identify_by option was added recently, auth_username. However, this
setting was not added as an allowable choice in the database enumeration
value.
This patch updates the current enumeration, adding in the new setting.
ASTERISK-26268 #close
Change-Id: Ib4788e8485e4cd40172ec0abbf5810a147ab8bf8
The extensions table defined two columns (id and priority) as primary key
autoincrement columns. However only one is allowed when defining the primary
key.
This patch removes the autoincrement attribute from the priority column since
it does not need to be as such and really should not have been on there in the
first place.
This patch also removes 'context', 'exten', and 'priority' from the primary key
index and creates a new combined unique contraint index on them.
ASTERISK-26183 #close
Change-Id: Ib9c712c612a4d7ec1edb0dcb77f1bae0905a470b
The PJSIP taskprocessors could be overflowed on startup
if there are many (thousands) realtime endpoints
configured with unsolicited mwi.
The PJSIP stack could be totally unresponsive for a few minutes
after boot completed.
This patch creates a separate PJSIP serializers pool for mwi
and makes unsolicited mwi use serializers from this pool.
This patch also adds 2 new global options to tune taskprocessor
alert levels: 'mwi_tps_queue_high' and 'mwi_tps_queue_low'.
This patch also adds new global option 'mwi_disable_initial_unsolicited'
to disable sending unsolicited mwi to all endpoints on startup.
If disabled then unsolicited mwi will start processing
on next endpoint's contact update.
ASTERISK-26230 #close
Change-Id: I4c8ecb82c249eb887930980a800c9f87f28f861a
The regular expression would match causing the code that handled
the line if it was merely a comment to never get executed.
Change-Id: I3e4022481037ebcba9905587fe8c764b4ce21819
When configuring SIP URIs in the pjsip.conf file it is
necessary to escape the semicolon so the parser does not
treat it as a comment. This change allows this to work in
the astconfigparser implementation.
A secondary bug where some data was lost if a configuration
option included a "=" in its value was also fixed.
A bug where sections would be considered equal despite
being different has also been fixed.
Change-Id: If229f656ef22050b50e7b34e90c4bffe796431f8
sqlalchemy was complaining:
sqlalchemy.exc.IdentifierError: Identifier
'ps_contacts_qualifyfreq_exptime' exceeds maximum length of 30
characters
This fixes the problem by changing the index name to be
"ps_contacts_qualifyfreq_exp" instead.
ASTERISK-26227 #close
Reported by Mark Michelson
Change-Id: I0ed784f87504be2a59ee8d3242ef6f625d5ed1a9
The new endpoint option allows the PJSIP channel driver's fax_detect
endpoint option to timeout on a call after the specified number of
seconds into a call. The new feature is disabled if the timeout is set
to zero. The option is disabled by default.
ASTERISK-26214
Reported by: Richard Mudgett
Change-Id: Id5a87375fb2c4f9dc1d4b44c78ec8735ba65453d
Since 5th November 2014, the master branch of libSRTP changed the prefix of
several member names and is not compatible with the source code in Asterisk
anymore. Therefore instead, this change checks out the latest version of the
libSRTP 1.5.x branch. Furthermore now, libSRTP is compiled with OpenSSL as
backend. This makes AES-GCM and AES-IN possible.
ASTERISK-22131 #close
Change-Id: I2e396cdc01da0ff610686e398ed210ca7408f7d6
If specified, incoming SUBSCRIBE requests will be searched for the matching
extension in the indicated context. If no "subscribe_context" is specified,
then the "context" setting is used.
ASTERISK-25471 #close
Change-Id: I3fb7a15f5bc154079bd348c08b7ad1cdd2d5e514
A non-existent constraint was being referenced in the upgrade script.
This patch corrects the problem by removing the reference.
This patch fixes another realtime problem as well. Our Alembic scripts
store booleans as yes or no values. However, Sorcery tries to insert
"true" or "false" instead. This patch updates Sorcery to use "yes" and
"no"
ASTERISK-26128 #close
Change-Id: I366dbbf91418a9cb160b3ca74b0e59b5ac284bec
The patch removes updating all Endpoints' status on startup.
Instead, only non-qualified aors with static contact
and non-qualified non-expired contacts are retrieved from the realtime to
update the endpoint status to ONLINE.
The endpoint name was added to the contact object to simply find the endpoint
that created this contact.
The status of endpoints with qualified aors will be updated by 'qualify'
functions.
ASTERISK-26061 #close
Change-Id: Id324c1776fa55d3741e0c5457ecac0304cb1a0df
The 81b01a191a46_pjsip_add_contact_reg_server.py script was attempting
to use UniqueConstraint and failing. It was not imported and after
importing it also continued to fail.
I've changed the script to use the explicit name of the constraint
instead.
Change-Id: I2438b0be90b7ce583b47dd27983c0c1a02cea5b9
As res_pjsip_nat rewrites contact's address, only the last Via header
can contain the source address of registered endpoint.
Also Call-Id header may contain the source address of registered
endpoint.
Added "via_addr", "via_port", "call_id" to contact.
Added new fields ViaAddress, CallID to AMI event ContactStatus.
ASTERISK-26011
Change-Id: I36bcc0bf422b3e0623680152d80486aeafe4c576
With the old SIP module we can use IP access controls per peer.
PJSIP module missing this feature.
This patch added next configuration Endpoint options:
"acl" - list of IP ACL section names in acl.conf
"deny" - List of IP addresses to deny access from
"permit" - List of IP addresses to permit access from
"contact_acl" - List of Contact ACL section names in acl.conf
"contact_deny" - List of Contact header addresses to deny
"contact_permit" - List of Contact header addresses to permit
This patch also better logging failed request:
add custom message instead of "No matching endpoint found"
add SIP method to logging
ASTERISK-25900
Change-Id: I456dea3909d929d413864fb347d28578415ebf02
This patch modified pjsip_options to retrieve only
permament contacts for aor if the qualify_frequency is > 0
and persisted contacts if the qualify_frequency is > 0.
This patch also fixed a bug in res_sorcery_astdb.
res_sorcery_astdb doesn't save object data retrived from astdb.
ASTERISK-25826
Change-Id: I1831fa46c4578eae5a3e574ee3362fddf08a1f05
For all OSes:
* Disabled third-party codecs in pjproject and added
'--disable-speex-codec --disable-speex-aec --disable-gsm-codec' to the
configure options since we don't use the pjsip codec capability.
FreeBSD:
* Added FreeBSD support to install_prereq.
* Changed pjproject/configure.m4 to use $GNU_MAKE instead of hardcoding "make".
* Added __progname and environ to asterisk.exports.in.
* Reverted the use of ldconfig to create shared library symlinks to ln.
* Only enable epoll in pjproject if `uname -s` is Linux.
* Added a patch to pjproject to take the name of the 'make' command from
an environment variable if supplied. This is needed for the python bindings.
(merged by Teluu into pjproject trunk 5/3/2016)
FreeBSD support isn't complete. Still some general issues regarding
make/gmake having nothing to do with pjproject. With some handholding it DOES
build successfully.
CentOS:
Added 'patch' and 'bzip2' to install_prereq PACKAGES_RH.
CentOS 6/7 32/64 build and run the pjsip testsuite successfully.
Ubuntu:
No changes required.
Ubuntu 15/16 32/64 build and run the pjsip testsuite successfully.
Debian:
No changes required.
Debian 6/7/8 32/64 build and run the pjsip testsuite successfully.
There will utimately be a follow-up patch to create an install_prereq for
the testsuite as I've discovered a few missing requirements.
ASTERISK-25968 #close
Change-Id: I5756a07facfc63798115a5e73a8709382fe9259c
If the Asterisk system name is set in asterisk.conf, it will be stored
into the "reg_server" field in the ps_contacts table to facilitate
multi-server setups.
ASTERISK-25931
Change-Id: Ia8f6bd2267809c78753b52bcf21835b9b59f4cb8
A feature of chan_sip that service providers relied upon was the ability to
identify by the Authorization username. This is most often used when customers
have a PBX that needs to register rather than identify by IP address. From my
own experiance, this is pretty common with small businesses who otherwise
don't need a static IP.
In this scenario, a register from the customer's PBX may succeed because From
will usually contain the PBXs account id but an INVITE will contain the caller
id. With nothing recognizable in From, the service provider's Asterisk can
never match to an endpoint and the INVITE just stays unauthorized.
The fixes:
A new value "auth_username" has been added to endpoint/identify_by that
will use the username and digest fields in the Authorization header
instead of username and domain in the the From header to match an endpoint,
or the To header to match an aor. This code as added to
res_pjsip_endpoint_identifier_user rather than creating a new module.
Although identify_by was always a comma-separated list, there was only
1 choice so order wasn't preserved. So to keep the order, a vector was added
to the end of ast_sip_endpoint. This is only used by res_pjsip_registrar
to find the aor. The res_pjsip_endpoint_identifier_* modules are called in
globals/endpoint_identifier_order.
Along the way, the logic in res_pjsip_registrar was corrected to match
most-specific to least-specific as res_pjsip_endpoint_identifier_user does.
The order is:
username@domain
username@domain_alias
username
Auth by username does present 1 problem however, the first INVITE won't have
an Authorization header so the distributor, not finding a match on anything,
sends a securty_alert. It still sends a 401 with a challenge so the next
INVITE will have the Authorization header and presumably succeed. As a result
though, that first security alert is actually a false alarm.
To address this, a new feature has been added to pjsip_distributor that keeps
track of unidentified requests and only sends the security alert if a
configurable number of unidentified requests come from the same IP in a
configurable amout of time. Those configuration options have been added to
the global config object. This feature is only used when auth_username
is enabled.
Finally, default_realm was added to the globals object to replace the hard
coded "asterisk" used when an endpoint is not yet identified.
The testsuite tests all pass but new tests are forthcoming for this new
feature.
ASTERISK-25835 #close
Reported-by: Ross Beer
Change-Id: I30ba62d208e6f63439600916fcd1c08a365ed69d
This patch added new global pjsip option 'disable_multi_domain'.
Disabling Multi Domain can improve Realtime performance by reducing
number of database requests.
ASTERISK-25930 #close
Change-Id: I2e7160f3aae68475d52742107949a799aa2c7dc7
Because SQLite doesn't support full ALTER capabilities, alembic scripts
require batch operations. However, that capability wasn't available until
0.7.0 which some distributions haven't reached yet. Therefore, the batch
operations introduced in commit 86d6e44cc (review 2319) have been reverted
and SQLite is unsupported again, for now anyway.
Tested the full upgrade and downgrade on MySQL/Mariadb and Postgresql.
ASTERISK-25890 #close
Reported-by: Harley Peters
Change-Id: I82eba5456736320256f6775f5b0b40133f4d1c80
check_installed_debs wasn't handling virtual packages like libsrtp-dev and
libresample-dev and on multiarch systems it was accidentally filtering out all
packages if any :i386 packages were found instead of just filtering out the
:i386 packages themselves.
Change-Id: Ifd68da0d1ee30cc84df14de3f9b9079d7c3cecda
res_pjsip_mwi was missing the chan_sip "vmexten" functionality which adds
the Message-Account header to the MWI NOTIFY. Also, specifying mailboxes
on endpoints for unsolicited mwi and on aors for subscriptions required
that the admin know in advance which the client wanted. If you specified
mailboxes on the endpoint, subscriptions were rejected even if you also
specified mailboxes on the aor.
Voicemail extension:
* Added a global default_voicemail_extension which defaults to "".
* Added voicemail_extension to both endpoint and aor.
* Added ast_sip_subscription_get_dialog for support.
* Added ast_sip_subscription_get_sip_uri for support.
When an unsolicited NOTIFY is constructed, the From header is parsed, the
voicemail extension from the endpoint is substituted for the user, and the
result placed in the Message-Account field in the body.
When a subscribed NOTIFY is constructed, the subscription dialog local uri
is parsed, the voicemail_extension from the aor (looked up from the
subscription resource name) is substituted for the user, and the result
placed in the Message-Account field in the body.
If no voicemail extension was defined, the Message-Account field is not added
to the NOTIFY body.
mwi_subscribe_replaces_unsolicited:
* Added mwi_subscribe_replaces_unsolicited to endpoint.
The previous behavior was to reject a subscribe if a previous internal
subscription for unsolicited MWI was found for the mailbox. That remains the
default. However, if there are mailboxes also set on the aor and the client
subscribes and mwi_subscribe_replaces_unsolicited is set, the existing internal
subscription is removed and replaced with the external subscription. This
allows an admin to configure mailboxes on both the endpoint and aor and allows
the client to select which to use.
ASTERISK-25865 #close
Reported-by: Ross Beer
Change-Id: Ic15a9415091760539c7134a5ba3dc4a6a1217cea
There were a number of places in the res_pjsip stack that were getting
all endpoints or all aors, and then filtering them locally.
A good example is pjsip_options which, on startup, retrieves all
endpoints, then the aors for those endpoints, then tests the aors to see
if the qualify_frequency is > 0. One issue was that it never did
anything with the endpoints other than retrieve the aors so we probably
could have skipped a step and just retrieved all aors. But nevermind.
This worked reasonably well with local config files but with a realtime
backend and thousands of objects, this was a nightmare. The issue
really boiled down to the fact that while realtime supports predicates
that are passed to the database engine, the non-realtime sorcery
backends didn't.
They do now.
The realtime engines have a scheme for doing simple comparisons. They
take in an ast_variable (or list) for matching, and the name of each
variable can contain an operator. For instance, a name of
"qualify_frequency >" and a value of "0" would create a SQL predicate
that looks like "where qualify_frequency > '0'". If there's no operator
after the name, the engines add an '=' so a simple name of
"qualify_frequency" and a value of "10" would return exact matches.
The non-realtime backends decide whether to include an object in a
result set by calling ast_sorcery_changeset_create on every object in
the internal container. However, ast_sorcery_changeset_create only does
exact string matches though so a name of "qualify_frequency >" and a
value of "0" returns nothing because the literal "qualify_frequency >"
doesn't match any name in the objset set.
So, the real task was to create a generic string matcher that can take a
left value, operator and a right value and perform the match. To that
end, strings.c has a new ast_strings_match(left, operator, right)
function. Left and right are the strings to operate on and the operator
can be a string containing any of the following: = (or NULL or ""), !=,
>, >=, <, <=, like or regex. If the operator is like or regex, the
right string should be a %-pattern or a regex expression. If both left
and right can be converted to float, then a numeric comparison is
performed, otherwise a string comparison is performed.
To use this new function on ast_variables, 2 new functions were added to
config.c. One that compares 2 ast_variables, and one that compares 2
ast_variable lists. The former is useful when you want to compare 2
ast_variables that happen to be in a list but don't want to traverse the
list. The latter will traverse the right list and return true if all
the variables in it match the left list.
Now, the backends' fields_cmp functions call ast_variable_lists_match
instead of ast_sorcery_changeset_create and they can now process the
same syntax as the realtime engines. The realtime backend just passes
the variable list unaltered to the engine. The only gotcha is that
there's no common realtime engine support for regex so that's been noted
in the api docs for ast_sorcery_retrieve_by_fields.
Only one more change to sorcery was done... A new config flag
"allow_unqualified_fetch" was added to reg_sorcery_realtime.
"no": ignore fetches if no predicate fields were supplied.
"error": same as no but emit an error. (good for testing)
"yes": allow (the default);
"warn": allow but emit a warning. (good for testing)
Now on to res_pjsip...
pjsip_options was modified to retrieve aors with qualify_frequency > 0
rather than all endpoints then all aors. Not only was this a big
improvement in realtime retrieval but even for config files there's an
improvement because we're not going through endpoints anymore.
res_pjsip_mwi was modified to retieve only endpoints with something in
the mailboxes field instead of all endpoints then testing mailboxes.
res_pjsip_registrar_expire was completely refactored. It was retrieving
all contacts then setting up scheduler entries to check for expiration.
Now, it's a single thread (like keepalive) that periodically retrieves
only contacts whose expiration time is < now and deletes them. A new
contact_expiration_check_interval was added to global with a default of
30 seconds.
Ross Beer reports that with this patch, his Asterisk startup time dropped
from around an hour to under 30 seconds.
There are still objects that can't be filtered at the database like
identifies, transports, and registrations. These are not going to be
anywhere near as numerous as endpoints, aors, auths, contacts however.
Back to allow_unqualified_fetch. If this is set to yes and you have a
very large number of objects in the database, the pjsip CLI commands
will attempt to retrive ALL of them if not qualified with a LIKE.
Worse, if you type "pjsip show endpoint <tab>" guess what's going to
happen? :) Having a cache helps but all the objects will have to be
retrieved at least once to fill the cache. Setting
allow_unqualified_fetch=no prevents the mass retrieve and should be used
on endpoints, auths, aors, and contacts. It should NOT be used for
identifies, registrations and transports since these MUST be
retrieved in bulk.
Example sorcery.conf:
[res_pjsip]
endpoint=config,pjsip.conf,criteria=type=endpoint
endpoint=realtime,ps_endpoints,allow_unqualified_fetch=error
ASTERISK-25826 #close
Reported-by: Ross Beer
Tested-by: Ross Beer
Change-Id: Id2691e447db90892890036e663aaf907b2dc1c67
When to install packages the indexed local is more old of the
version of software on the repository they have been upgraded by security
update then get the package will give 404 not found.
The patch prevent by update local index to repository for aptitude before
install.
ASTERISK-25495 #close
Reporte by: Rodrigo Ramírez Norambuena
Change-Id: I645959e553aac542805ced394cac2dca964051fa
(cherry picked from commit 88f3dbaec9)
If in Debian or system based, dont have aptitude installed the script do
nothing. This patch checked if aptitude installed, if not installed.
Also, if execute script with all packages installed yet, the script not show
nothing and return exit 1 because the command 'grep' get nothing from pipe from
'awk'.
ASTERISK-25113 #close
Reported By: Rodrigo Ramírez Norambuena <decipher.hk@gmail.com>
Change-Id: Iebdff55805d3917166e5e08e0a1e2176f36ff27f
(cherry picked from commit 6737ded058)
RedHat/CentOS needs python-devel
Debian/Ubuntu needs automake, libsrtp-dev and python-dev
Ubuntu also needed libncurses5-dev for cmenuselect so while not
needed for pjproject, I adedd it anyway.
Change-Id: Idf5fa16e2d87c687439621507e122cb9461d7089
Downgrade had a few issues. First there was an errant 'update' statement in
add_auto_dtmf_mode that looks like it was a copy/paste error. Second, we
weren't cleaning up the ENUMs so subsequent upgrades on postgres failed
because the types already existed.
For sqlite... sqlite doesn't support ALTER or DROP COLUMN directly.
Fortunately alembic batch_operations takes care of this for us if we
use it so the alter and drops were converted to use batch operations.
Here's an example downgrade:
with op.batch_alter_table('ps_endpoints') as batch_op:
batch_op.drop_column('tos_audio')
batch_op.drop_column('tos_video')
batch_op.add_column(sa.Column('tos_audio', yesno_values))
batch_op.add_column(sa.Column('tos_video', yesno_values))
batch_op.drop_column('cos_audio')
batch_op.drop_column('cos_video')
batch_op.add_column(sa.Column('cos_audio', yesno_values))
batch_op.add_column(sa.Column('cos_video', yesno_values))
with op.batch_alter_table('ps_transports') as batch_op:
batch_op.drop_column('tos')
batch_op.add_column(sa.Column('tos', yesno_values))
# Can't cast integers to YESNO_VALUES, so dropping and adding is required
batch_op.drop_column('cos')
batch_op.add_column(sa.Column('cos', yesno_values))
Upgrades from base to head and downgrades from head to base were tested
repeatedly for postgresql, mysql/mariadb, and sqlite3.
Change-Id: I862b0739eb3fd45ec3412dcc13c2340e1b7baef8
This work-in-progress is the first step to being able to reliably
build Asterisk containers from the Asterisk source. I'm submitting
this based on feedback gained at AstriDevCon 2015.
Information about how to use this is provided in contrib/docker/README.md
and will result in a local Asterisk container being built right from
your source. I believe this can eventually be automated via
hub.docker.com.
Change-Id: Ifa070706d40e56755797097b6ed72c1e243bd0d1
The 'reload' mechanism actually involves closing the underlying
socket and calling the appropriate udp, tcp or tls start functions
again. Only outbound_registration, pubsub and session needed work
to reset the transport before sending requests to insure that the
pjsip transport didn't get pulled out from under them.
In my testing, no calls were dropped when a transport was changed
for any of the 3 transport types even if ip addresses or ports were
changed. To be on the safe side however, a new transport option was
added (allow_reload) which defaults to 'no'. Unless it's explicitly
set to 'yes' for a transport, changes to that transport will be ignored
on a reload of res_pjsip. This should preserve the current behavior.
Change-Id: I5e759850e25958117d4c02f62ceb7244d7ec9edf
A recent commit set qualify_timeout to Decimal which isn't supported.
This path corrects it to Float.
Change-Id: I038f5274ba8cb60f8518a5845ce448d49306aadf
Corrects the qualify_timeout column type from Integer to Decimal
ASTERISK-25686 #close
Reported-by: Marcelo Terres
Change-Id: I757d0e3c011ee9be6cd5abd48bc92441a405d3c8
PJPROJECT has a function available to dump the compile time
options used when building the library.
* Add CLI "pjsip show buildopts" command.
* Update contrib/scripts/autosupport to get pjproject information.
Change-Id: Id93a6a916d765b2a2e5a1aeb54caaf83206be748
On a system with multiple ip addresses in the same subnet, if a
transport is bound to a specific ip address and endpoint/media_address
is set, the SIP/SDP will have the correct address in all fields but
the rtp stream MAY still originate from one of the other ip addresses,
most probably the "primary" ip address. This happens because
res_pjsip_sdp_rtp/create_rtp always calls ast_instance_new with
the "all" ip address (0.0.0.0 or ::).
The new option causes res_pjsip_sdp_rtp/create_rtp to call
ast_rtp_instance_new with the endpoint's media_address (if specified)
instead of the "all" address. This causes the packets to originate from
the specified address.
ASTERISK-25632
ASTERISK-25637
Reported-by: Olivier Krief
Reported-by: Dan Journo
Change-Id: I3dfaa079e54ba7fb7c4fd1f5f7bd9509bbf8bd88
Added new global option (regcontext) to pjsip. When set, Asterisk will
dynamically create and destroy a NoOp priority 1 extension
for a given endpoint who registers or unregisters with us.
ASTERISK-25670 #close
Reported-by: Daniel Journo
Change-Id: Ib1530c5b45340625805c057f8ff1fb240a43ea62
When running the PJSIP AMI "show_endpoint" test with automatic
conversion to realtime, the test would fail. This was because the AOR
"contact" column was sized at 40, and the configured contact was larger
than that.
This commit increases the size of the contact column to 255 characters.
Change-Id: Ia65bc7fd37699b7c0eaef9629a1a31eab9a24ba1
The keep_alive_interval option was added about a year ago, but no
alembic revision was created to add the appropriate column to the
database.
This commit fixes the problem and adds the column. This was discovered
by running the testsuite with automatic conversion to realtime enabled.
Change-Id: If3ef92a7c4f4844d08f8aae170d2178aec5c4c1a
During outbound registration it is possible to receive a fatal (any permanent/
non-temporary 4xx, 5xx, 6xx) response from the registrar that is simply due
to a problem with the registrar itself. Upon receiving the failure response
Asterisk terminates outbound registration for the given endpoint.
This patch adds an option, 'fatal_retry_interval', that when set continues
outbound registration at the given interval up to 'max_retries' upon receiving
a fatal response.
ASTERISK-25485 #close
Change-Id: Ibc2c7b47164ac89cc803433c0bbe7063bfa143a2
This patch adds some minor tweaks for autosupport to update it for Asterisk 13.
This includes:
* Finally removing most references to Zaptel
* Adding support for some additional 'core' commands, and fixing nomenclature
that generally hasn't been used for some time
* Adding some PJSIP/SIP commands to gather endpoints/peers and active channels
Change-Id: Ic997b418cbd9313588b6608e50f47b0ce6f4f1f1
To help in diagnosing mismatched modules and libraries, this
script scans for version, repository, and source information
and reports what is found.
ASTERISK-25376 #close
Reported by: Ashley Sanders
Change-Id: Ib0642d0fb96712476f59760d6d137a24633fe2d6
When Asterisk sends an outbound SIP request, if there is no direct
reason to place a specific value for the username in the From header,
Asterisk would generate a UUID. For example, this would happen when
sending outbound OPTIONS requests when qualifying or when sending
outbound INVITE requests when originating (if no explicit caller ID were
provided). The issue is that some SIP providers reject these sorts of
requests with a "Name too long" error response.
This patch aims to fix this by changing the default outbound username in
From headers to "asterisk". This value can be overridden by changing the
default_from_user option in the global options if desired.
ASTERISK-25377 #close
Reported by Mark Michelson
Change-Id: I6a4d34a56ff73ff4f661b0075aeba5461b7f3190
Asterisk needs the sqlite 3 library, which is package
sqlite-devel in CentOS. By adding this package to the
script, a problem with configure failing is resolved.
ASTERISK-25331 #close
Reported by: Kevin Harwell
Change-Id: I90efaf6a01914fea03f21e5cdbd91c348f44b0ec
This change adds support for the 'rtp_timeout' and 'rtp_timeout_hold'
endpoint options. These allow the channel to be hung up if RTP
is not received from the remote endpoint for a specified number of
seconds.
ASTERISK-25259 #close
Change-Id: I3f39daaa7da2596b5022737b77799d16204175b9
This adds an "rtp_keepalive" option for PJSIP endpoints. Similar to the
chan_sip option, this specifies an interval, in seconds, at which we
will send RTP comfort noise frames. This can be useful for keeping RTP
sessions alive as well as keeping NAT associations alive during lulls.
ASTERISK-25242 #close
Reported by Mark Michelson
Change-Id: I06660ba672c0a343814af4cec838e6025cafd54b
Some phones send g.726 audio packed for AAL2, which differs from what is
recommended by RFC 3351. If Asterisk receives audio formatted as such when
negotiating g.726 then it sounds a bit distorted. Added an option to
res_pjsip_endpoint that allows g.726 negotiated audio to be treated as g.726
AAL2 packed.
ASTERISK-25158 #close
Reported by: Steve Pitts
Change-Id: Ie7e21f75493d7fe53e75e12c971e72f5afa33615
Moved contrib/asterisk-ng-doxygen to doc/asterisk-ng-doxygen.in
Changed /Makefile to copy asterisk-ng-doxygen.in to
asterisk-ng-doxygen then modify it with version instead of
modifying asterisk-ng-doxygen directly. Updated clean
targets as well.
Updated /.gitignore and doc/.gitignore.
Change-Id: I38712d3e334fa4baec19d30d05de8c6f28137622
* Added a lookbehind to one-line comment matcher to skip escaped
semicolons.
* Added support for block comments.
Change-Id: Id17dfaeda8ed4be572e8107a0c010066584aaee7
The upgrade script for auto DTMF mode (31cd4f4891ec) added in 88b0fa7755
failed to add ENUM support for Postgres databases. This requires a
specific import from the sqlalchemy.dialects.postgresql package. This
patch corrects this error, which allows for Postgres update scripts to
be generated.
ASTERISK-24706
Change-Id: I4742ac8efa533cd6f18e0bdd907b339a9aedf015
This is the second follow-on to https://reviewboard.asterisk.org/r/4572/ and the
discussion at
http://lists.digium.com/pipermail/asterisk-dev/2015-March/073921.html
The basic issues are that changes in contact status don't cause events to be
emitted for the associated endpoint. Only dynamic contact add/delete actions
update the endpoint. Also, the qualify timeout is fixed by pjsip at 32 seconds
which is a long time.
This patch makes use of the new transaction timeout feature in r4585 and
provides the following capabilities...
1. A new aor/contact variable 'qualify_timeout' has been added that allows the
user to specify the maximum time in milliseconds to wait for a response to an
OPTIONS message. The default is 3000ms. When the timer expires, the contact is
marked unavailable.
2. Contact status changes are now propagated up to the endpoint as follows...
When any contact is 'Available', the endpoint is marked as 'Reachable'. When
all contacts are 'Unavailable', the endpoint is marked as 'Unreachable'. The
existing endpoint events are generated appropriately.
ASTERISK-24863 #close
Change-Id: Id0ce0528e58014da1324856ea537e7765466044a
Tested-by: Dmitriy Serov
Tested-by: George Joseph <george.joseph@fairview5.com>
Currently when Asterisk starts initial qualifies of contacts are spread out
randomly between 0 and qualify_timeout to prevent network and system overload.
If a contact's qualify_frequency is 5 minutes however, that contact may be
unavailable to accept calls for the entire 5 minutes after startup. So while
staggering the initial qualifies is a good idea, basing the time on
qualify_timeout could leave contacts unavailable for too long.
This patch adds a new global parameter "max_initial_qualify_time" that sets the
maximum time for the initial qualifies. This way you could make sure that all
your contacts are initialy, randomly qualified within say 30 seconds but still
have the contact's ongoing qualifies at a 5 minute interval.
If max_initial_qualify_time is > 0, the formula is initial_interval =
min(max_initial_interval, qualify_timeout * random(). If not set,
qualify_timeout is used.
The default is "0" (disabled).
ASTERISK-24863 #close
Change-Id: Ib80498aa1ea9923277bef51d6a9015c9c79740f4
Tested-by: George Joseph <george.joseph@fairview5.com>
This patch adds support for automatically detecting the type of DTMF that a
PJSIP endpoint supports. When the 'dtmf_mode' endpoint option is set to 'auto',
the channel created for an endpoint will attempt to determine if RFC 4733
DTMF is supported. If so, it will use that DTMF type. If not, the DTMF type
for the channel will be set to inband.
Review: https://reviewboard.asterisk.org/r/4438
ASTERISK-24706 #close
Reported by: yaron nahum
patches:
yaron_patch_3_Feb.diff submitted by yaron nahum (License 6676)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434637 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Incoming PJSIP call legs that have not been answered yet send unnecessary
"180 Ringing" or "183 Progress" messages every time a connected line
update happens. If the outgoing channel is also PJSIP then the incoming
channel will always send a "180 Ringing" or "183 Progress" message when
the outgoing channel sends the INVITE.
Consequences of these unnecessary messages:
* The caller can start hearing ringback before the far end even gets the
call.
* Many phones tend to grab the first connected line information and refuse
to update the display if it changes. The first information is not likely
to be correct if the call goes to an endpoint not under the control of the
first Asterisk box.
When connected line first went into Asterisk in v1.8, chan_sip received an
undocumented option "rpid_immediate" that defaults to disabled. When
enabled, the option immediately passes connected line update information
to the caller in "180 Ringing" or "183 Progress" messages as described
above.
* Added "rpid_immediate" option to prevent unnecessary "180 Ringing" or
"183 Progress" messages. The default is "no" to disable sending the
unnecessary messages.
ASTERISK-24781 #close
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/4473/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433338 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes previously reverted code that caused binary incompatibility
problems with some modules. And like the original patch it makes sure that
no matter what order the endpoint identifier modules were loaded, priority is
given based on the ones specified in the new global 'endpoint_identifier_order'
option.
ASTERISK-24840
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4489/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433028 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Due to a break in binary compatibility with some other modules these changes
are being reverted until the issue can be resolved.
ASTERISK-24840
Reported by: Mark Michelson
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It's possible to have a scenario that will create a conflict between endpoint
identifiers. For instance an incoming call could be identified by two different
endpoint identifiers and the one chosen depended upon which identifier module
loaded first. This of course causes problems when, for example, the incoming
call is expected to be identified by username, but instead is identified by ip.
This patch adds a new 'global' option to res_pjsip called
'endpoint_identifier_order'. It is a comma separated list of endpoint
identifier names that specifies the order by which identifiers are processed
and checked.
ASTERISK-24840 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4455/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change does two things:
1. Disables debugging so assertions which can return an error do,
instead of asserting.
2. Enables IPv6 support.
ASTERISK-24632 #close
Reported by: Rusty Newton
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431843 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On Debian based systems, the install_prereq tool uses a search command on
Debian that results in selecting both 64-bit and 32-bit packages. Besides the
waste of disk space, this can actually cause aptitude use 100% of memory on a
VM with 1GB of RAM as it tried to work out all of the 32-bit package
dependencies.
This patch filters out the 32-bit packages on a 64-bit machine, and leaves
32-bit machines alone.
ASTERISK-24048 #close
Reported by: Ben Klang
Tested by: Ben Klang, Matt Jordan
patches:
install_prereq_64-bit_compat.patch uploaded by Ben Klang (License 5876)
........
Merged revisions 430798 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430799 65c4cc65-6c06-0410-ace0-fbb531ad65f3
General improvements to SIP to PJSIP conversion utility:
1) track default section of input file to allow parsing
an include file that doesn't specify a [section]
2) informatively handle case of assignment without [section]
3) correctly handle getting sections from included files
- [section]'s are inherited by included file
4) provide null string as default transport bind ip
5) gracefully handle missing portions of registration string
6) denote steps of operation during conversion and confirm
top level files as a convenience
ASTERISK-24474 #close
Review: https://reviewboard.asterisk.org/r/4280/
Reported by: John Kiniston
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430469 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the user_eq_phone patch was backported to 13, it referenced the downward
revision that the PJSIP optimistic encryption option also references. This
creates a multi-path upgrade Exception when generating the SQL files.
This patch corrects this in the 13 branch. Note that trunk, which already
contained both of these features, is unaffected by this problem.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430252 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This backports the following from trunk, which were missed:
r427257 | file | 2014-11-04 16:31:16 -0600 (Tue, 04 Nov 2014) | 2 lines
res_pjsip: Allow + at the beginning of a phone number when user_eq_phone is enabled.
r427259 | file | 2014-11-04 16:51:32 -0600 (Tue, 04 Nov 2014) | 2 lines
res_pjsip: Apply the 'user_eq_phone' setting to the To header as well.
It also adds the Alembic script for the option.
ASTERISK-24643
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430092 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Optimistic SRTP is the ability to enable SRTP but not have it be
a fatal requirement. If SRTP can be used it will be, if not it won't be.
This gives you a better chance of using it without having your sessions
fail when it can't be.
Encrypt all the things!
Review: https://reviewboard.asterisk.org/r/3992/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428222 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Make astob2 REF_DEBUG output an invalid object line when an invalid ao2
object ref/unref is attempted. This is similar to the
constructor/destructor lines.
* Fixed refcounter.py to handle skewed objects that have
constructor/destructor states.
* Made refcounter.py highlight the invalid ao2 object refs by putting them
in their own section of the processed output file.
* Made refcounter.py highlight unreffing an object by more than one that
results in a negative ref count and the object being destroyed. The
abnormally destroyed object is reported in the invalid and finalized
object sections of the output.
Review: https://reviewboard.asterisk.org/r/3971/
........
Merged revisions 423349 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 423400 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 423416 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@423418 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch gives the optional ability to keep queue rules in RealTime. It is
important to note that with this patch:
(a) Queue rules in RealTime are only examined on module load/reload
(b) Queue rules are loaded both from the queuerules.conf file as well as the
RealTime backend
To inform app_queue to examine RealTime for queue rules, a new setting has been
added to queuerules.conf's general section "realtime_rules". RealTime queue
rules will only be used when this setting is set to "yes".
The schema for the database table supports a rule_name, time, min_penalty, and
max_penalty columns. min_penalty and max_penalty can be relative, if a '-' or
'+' literal is provided. Otherwise, the penalties are treated as constants.
For example:
rule_name, time, min_penalty, max_penalty
'default', '10', '20', '30'
'test2', '20', '30', '55'
'test2', '25', '-11', '+1111'
'test2', '400', '112', '333'
'test3', '0', '4564', '46546'
'test_rule', '40', '15', '50'
which would result in :
Rule: default
- After 10 seconds, adjust QUEUE_MAX_PENALTY to 30 and adjust
QUEUE_MIN_PENALTY to 20
Rule: test2
- After 20 seconds, adjust QUEUE_MAX_PENALTY to 55 and adjust
QUEUE_MIN_PENALTY to 30
- After 25 seconds, adjust QUEUE_MAX_PENALTY by 1111 and adjust
QUEUE_MIN_PENALTY by -11
- After 400 seconds, adjust QUEUE_MAX_PENALTY to 333 and adjust
QUEUE_MIN_PENALTY to 112
Rule: test3
- After 0 seconds, adjust QUEUE_MAX_PENALTY to 46546 and adjust
QUEUE_MIN_PENALTY to 4564
Rule: test_rule
- After 40 seconds, adjust QUEUE_MAX_PENALTY to 50 and adjust
QUEUE_MIN_PENALTY to 15
If you use RealTime, the queue rules will be always reloaded on a module
reload, even if the underlying file did not change. With the option disabled,
the rules will only be reloaded if the file was modified.
Review: https://reviewboard.asterisk.org/r/3607/
ASTERISK-23823 #close
Reported by: Michael K
patches:
app_queue.c_realtime_trunk.patch uploaded by Michael K (License 6621)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@420624 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When run in offline mode, this would attempt to check the database for
the presence of a type it was going to try to create. I now check the
context to see if we're running in offline mode and change a parameter
accordingly.
........
Merged revisions 407567 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420237 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Increased the sippeers useragent max string size to 255.
* Changed the queue_members uniqueid to an auto incremented integer
instead of a string.
* Increased the voicemail_messages BLOB size to LONGBLOB on mysql.
* Fixed the add_tables_for_pjsip config change version downgrade actions
to drop a table it created.
* Adjusted the sample alembic.ini files cdr.ini.sample, config.ini.sample,
and voicemail.ini.sample to give a mysql and postgres sqlalchemy.url
lines.
ASTERISK-23847 #close
Reported by: Stephen More
ASTERISK-23825 #close
Reported by: Stephen More
ASTERISK-23909 #close
Reported by: Stephen More
Review: https://reviewboard.asterisk.org/r/3870/
........
Merged revisions 420211 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420212 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Most channel drivers let you specify a default accountcode to be set on
channels associated with a particular peer/endpoint/object. Prior to this
patch, chan_pjsip/res_pjsip did not support such a setting.
This patch adds a new setting to the res_pjsip endpoint object, 'accountcode'.
When a channel is created that is associated with an endpoint with this value
set, the channel will automatically have its accountcode property set to the
value configured for the endpoint.
Review: https://reviewboard.asterisk.org/r/3724/
ASTERISK-24000 #close
Reported by: Matt Jordan
........
Merged revisions 418756 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
res_rtp_asterisk: Add SHA-256 support for DTLS and perform DTLS negotiation on RTCP.
This change fixes up DTLS support in res_rtp_asterisk so it can accept and provide
a SHA-256 fingerprint, so it occurs on RTCP, and so it occurs after ICE negotiation
completes. Configuration options to chan_sip and chan_pjsip have also been added to
allow behavior to be tweaked (such as forcing the AVP type media transports in SDP).
ASTERISK-22961 #close
Reported by: Jay Jideliov
Review: https://reviewboard.asterisk.org/r/3679/
Review: https://reviewboard.asterisk.org/r/3686/
........
Merged revisions 417678 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417679 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change makes res_pjsip_pubsub persist inbound subscriptions in sorcery. By default
this uses the local astdb but it can also be configured to store within an outside
database. When Asterisk is started these subscriptions are recreated if they have not
expired. Notifications are sent to the devices which have subscribed and they are none
the wiser that the system has restarted.
Review: https://reviewboard.asterisk.org/r/3598/
........
Merged revisions 415766 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415767 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From now on, make install will overwrite safe_asterisk with the
latest version. You need to move any local modifications to files
inside /etc/asterisk/startup.d, if you have any.
See also commits r394939 and r397938.
ASTERISK-21965 #close
Patches:
safe_asterisk.patch uploaded by jkister (License 6232, modified by me)
........
Merged revisions 415748 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415749 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Cleans up the safe_asterisk script and adds the ASTSAFE_FOREGROUND
option that allows the debian asterisk init script to capture the
right pid.
* Drop the vim #modeline which wasn't used. Use test consistently
without the odd configure xno syntax. Double quote all paths.
General cleanup.
* Don't output message()s to the console but only to TTY if set.
* Allow TTY to be "no" as well as empty (debian compatibility with
debian/patches/safe_asterisk-config).
* Add option to export ASTSAFE_FOREGROUND=1 from the init script
that calls this to disable backgrounding. Debian uses a similar
method in debian/patches/safe_asterisk-nobg).
ASTERISK-23492 #close
Review: https://reviewboard.asterisk.org/r/3574/
........
Merged revisions 415132 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 415171 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 415172 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415173 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When generating SQL files via the repotools alembic_creator.py script, a
configuration object is used programatically with SQLAlechemy, as opposed to
a configuration file. This patch ignores failures to interpret a config file,
as ... there isn't one in this case.
........
Merged revisions 414763 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The string lengths on certain columns created through alembic for PJSIP were
too short. For instance, columns containing URIs are currently set to 40
characters, but this can be too small and result in truncated values. Added
an alembic migration script that increases the size of these columns and a
few others to 255.
ASTERISK-23639 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/3475/
........
Merged revisions 412992 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412993 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
(1) It makes REF_DEBUG a meneselect item. Enabling REF_DEBUG now enables
REF_DEBUG globally throughout Asterisk.
(2) The ref debug log file is now created in the AST_LOG_DIR directory.
Every run will now blow away the previous run (as large ref files
sometimes caused issues). We now also no longer open/close the file
on each write, instead relying on fflush to make sure data gets written
to the file (in case the ao2 call being performed is about to cause a
crash)
(3) It goes with a comma delineated format for the ref debug file. This
makes parsing much easier. This also now includes the thread ID of the
thread that caused ref change.
(4) A new python script instead for refcounting has been added in the
contrib/scripts folder.
(5) The old refcounter implementation in utils/ has been removed.
Review: https://reviewboard.asterisk.org/r/3377/
........
Merged revisions 412114 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412115 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 412153 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412154 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since the relatime scripts are now managed by Alembic, the previous realtime
scripts were previously removed. However, the removal process messed up, as
the files were still in the repository. The contents were just empty.
This removes the files from the tree.
........
Merged revisions 411442 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411443 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Transport TOS values were interpreted as DSCP values without being documented
as such. Endpoint TOS values (tos_audio/tos_video) behaved normally as TOS
values have historically. This patch makes the transport TOS values behave as
TOS values and makes all TOS values readable as string values (e.g. AF11).
In addition, alembic scripts have been updated to use the proper field types
for all TOS/COS values.
(issue ASTERISK-23235)
Reported by: George Joseph
Review: https://reviewboard.asterisk.org/r/3304/
........
Merged revisions 410028 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If an enum had been previously created the alembic script would attempt to
re-create it and an error would be generated while running migrations for a
postgresql server. The work around for this is to use the ENUM object type
for postgres as opposed to the generic enum type used by sqlalchemy. Using
this type in the script seems to work properly for both postgres and mysql.
........
Merged revisions 407572 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A couple of the scripts had errors that would not allow a full migration to
take place. The extensions table needed to make its 'id' column a primary
key in order to work with mysql. The other script ...add_endpoints... was
missing tables that it was trying to add columns to.
Added the primary key on id for extensions and added the tables in for the
missing pjsip configuration options. While it is not ideal to modify already
released scripts this was a case where it had to be done due to errors in
the script and lacking a better alternative.
Review: https://reviewboard.asterisk.org/r/3167/
........
Merged revisions 407019 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds Path support to chan_pjsip in res_pjsip_path.c with minimal
additions in res_pjsip_registrar.c to store the path and additions in
res_pjsip_outbound_registration.c to enable advertisement of path
support to registrars and intervening proxies.
Path information is stored on contacts and is enabled via Address of
Record (AoRs) and Registration configuration sections.
While adding path support, it became necessary to be able to add SIP
supplements that handled messages outside of sessions, so a framework
for handling these types of hooks was added in parallel to the
already-existing session supplements and several senders of
out-of-dialog requests were refactored as a result.
(closes issue ASTERISK-21084)
Review: https://reviewboard.asterisk.org/r/3050/
........
Merged revisions 405565 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405566 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
1) The env scripts have been updated to be tolerant of a NULL configuration
file. This occurs when configuration is provided by an external script,
such that the actual config.ini file is not used.
2) Enum types have all been given names. This is needed for PostgreSQL script
generation.
3) The identifier meetme_confno_starttime_endtime is greater than 30
characters, and hence invalid for Oracle databases. This has been truncated
down to meetme_confno_start_end.
........
Merged revisions 400383 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402073 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Walter Doekes
zuul
Richard Mudgett
Alexander Traud
Joshua Colp
Kevin Harwell
George Joseph
Alexei Gradinari
Mark Michelson
George Joseph
Rodrigo Ramírez Norambuena
Rodrigo Ramírez Norambuena
Leif Madsen
Daniel Journo
Matt Jordan
Scott Griepentrog
Ivan Poddubny
Diederik de Groot
Walter Doekes
Scott Griepentrog
Corey Farrell
Jonathan Rose
Tzafrir Cohen
Sean Bright
Kinsey Moore
David M. Lee