New responses sent within a PJSIP sessions are based on those that were
sent before. Therefore, adding/modifying a header once causes it to be
sent on all responses that follow.
Sending 181 Call Is Being Forwarded many times first adds "histinfo"
duplicated more and more, and eventually overflows past the array
boundary.
This commit adds a check preventing adding "histinfo" more than once,
and skipping it if there is no more space in the header.
Similar overflow situations can also occur in res_pjsip_path and
res_pjsip_outbound_registration so those were also modified to
check the bounds and suppress duplicate Supported values.
ASTERISK-29227
Reported by: Ivan Poddubny
Change-Id: Id43704a1f1a0293e35cc7f844026f0b04f2ac322
if From number contain * or # asterisk will not add user=phone
Currently only number that uses AST_DIGIT_ANYNUM can have "user=phone" but the validation should use AST_DIGIT_ANY
this is a problem when you want to send call to ISUP
as they will disregard the From header and either replace From with anonymous or with p-asserted-identity
ASTERISK-29261
Reported by: Mark Petersen
Tested by: Mark Petersen
Change-Id: I3307bdbf757582740bfee4110e85f7b6c9291cc4
Provided a support of variuos URL-schemes for res_musiconhold,
registered by ast_bucket_scheme_register().
ASTERISK-29262 #close
Change-Id: If0ea8697587353dce358a70035d82649fd4632b6
function ast_sip_session_media_state_add.
Check ast_media_type matches when a ast_sip_session_media is found
otherwise when transitioning from say image to audio, the wrong
session is returned in the first if statement.
ASTERISK-29220 #close
Change-Id: I6f6efa9b821ebe8881bb4c8c957f8802ddcb4b5d
The last argument to ast_copy_string() is the buffer size, not the
number of characters, so we add 1 to avoid stamping out the final \n
in the persisted SUBSCRIBE message.
Change-Id: I019b78942836f57965299af15d173911fcead5b2
When both a tech subscription and an endpoint subscription exist for a given
endpoint, TextMessageReceived events are dispatched to the tech subscription
only.
ASTERISK-29229
Change-Id: I9eac4cba5f9e27285a282509395347abc58fc2b8
session->channel doesn't exist until chan_pjsip creates it, so intead of
setting a channel variable every new incoming call sets one and the same
global variable.
This patch moves the code to chan_pjsip so that SIPDOMAIN is set on
a newly created channel, it also removes a misleading reference to
channel->session used to fetch call pickup configuraion.
ASTERISK-29240
Change-Id: I90c9bbbed01f5d8863585631a29322ae4e046755
This reverts commit 860e40dd80.
Reason for revert: Too many issues reported. Need to research and correct.
ASTERISK-29230
ASTERISK-29231
Reported by: Michael Maier
Change-Id: I9011e2eecda4e91e1cfeeda6d1a7f1a0453eab41
Segfault occurs during outbound UDP registration when all
transport states are being iterated over. The transport object
in the transport is accessed, but flow transports have a NULL
transport object.
Modify to not iterate over any flow transport
ASTERISK-29210 #close
Change-Id: If28dc3a18bdcbd0a49598b09b7fe4404d45c996a
AST_VECTOR_SIZE() returns a size_t. This is not always equivalent to an
unsigned long on all machines.
Change-Id: I0a4189a104e6e3a2e2273de06620eaef19df9338
Add a check to see if the URI is a Tel URI and prevent crashing on
trying to retrieve the reason parameter.
ASTERISK-29191
ASTERISK-29219
Change-Id: I0320aa205f22cda511d60a2edf2b037e8fd6cc37
The documentation in the wiki says there should be spyee-channel
information elements in the ChanSpyStop AMI event.
https://wiki.asterisk.org/wiki/x/Xc5uAg
However, this is not the case in Asterisk <= 16.10.0 Version. We're
using these Spyee* arguments since Asterisk 11.x, so these arguments
vanished in Asterisk 12 or higher.
For maximum compatibility, we still send the ChanSpyStop event even if
we are not able to find any 'Spyee' information.
ASTERISK-28883 #close
Change-Id: I81ce397a3fd614c094d043ffe5b1b1d76188835f
In rewrite_uri asterisk was not making deep copies of strings when
changing the uri. This was in some cases causing garbage in the route
header and in other cases even crashing asterisk when receiving a
message with a record-route header set. Thanks to Ralf Kubis for
pointing out why this happens. A similar problem was found in
res_pjsip_transport_websocket.c. Pjproject needs as well to be patched
to avoid garbage in CANCEL messages.
ASTERISK-29024 #close
Change-Id: Ic5acd7fa2fbda3080f5f36ef12e46804939b198b
This adds support for both Digium and Sangoma user agent strings
for the Sangoma specific body supplement.
Change-Id: Ib99362b24b91d3cbe888d8b2fce3fad5515d9482
In some circumstances it was possible for an INVITE
session to be destroyed while we were still using it.
This occurred due to the reference on the INVITE session
being released internally as a result of its state
changing to DISCONNECTED.
This change adds a reference to the INVITE session
which is released when our own session is destroyed,
ensuring that the INVITE session remains valid for
the lifetime of our session.
ASTERISK-29022
Change-Id: I300c6d9005ff0e6efbe1132daefc7e47ca6228c9
By default libcurl does not follow redirects, so we explicitly enable
it by setting CURLOPT_FOLLOWLOCATION. Once that is enabled, libcurl
will follow up to CURLOPT_MAXREDIRS redirects, which by default is
configured to be unlimited.
This patch sets CURLOPT_MAXREDIRS to a more reasonable default (8). If
we determine at some point that this needs to be increased on
configurable it is a trivial change.
ASTERISK-29173 #close
Change-Id: I4925ebbcf0c7d728bb9252b3795b3479ae225b30
the 'J' is missing in module description.
"PSIP STIR/SHAKEN Module for Asterisk" -> "PJSIP STIR/SHAKEN Module for Asterisk"
ASTERISK-29175 #close
Change-Id: I17da008540ee2e8496b644d05f995b320b54ad7a
RFC 3261 says that the Accept-Encoding header should be present
in an options response. Permitted values according to RFC 2616
are only compression algorithms like gzip or the default identity
encoding. Therefore "text/plain" is not a correct value here.
As long as the header is hard coded, it should be set to "identity".
Without this fix an Alcatel OmniPCX periodically logs warnings like
"[sip_acceptIncorrectHeader] Header Accept-Encoding is malformed"
on a SIP Trunk.
ASTERISK-29165 #close
Change-Id: I0aa2211ebf0b4c2ed554ac7cda794523803a3840
* Instead of using the pjproject timer heap, we now use our own
pjsip_scheduler. This allows us to more easily debug and allows us to
see times in "pjsip show/list registrations" as well as being able to
see the registrations in "pjsip show scheduled_tasks".
* Added the last registration time, registration interval, and the next
registration time to the CLI output.
* Removed calls to pjsip_regc_info() except where absolutely necessary.
Most of the calls were just to get the server and client URIs for log
messages so we now just save them on the client_state object when we
create it.
* Added log messages where needed and updated most of the existong ones
to include the registration object name at the start of the message.
Change-Id: I4534a0fc78c7cb69f23b7b449dda9748c90daca2
* Added a ONESHOT type that never reschedules.
* Added "like" capability to "pjsip show scheduled_tasks" so you can do
the following:
CLI> pjsip show scheduled_tasks like outreg
PJSIP Scheduled Tasks:
Task Name Interval Times Run ...
============================================= ========= ========= ...
pjsip/outreg/testtrunk-reg-0-00000074 50.000 oneshot ...
pjsip/outreg/voipms-reg-0-00000073 110.000 oneshot ...
* Fixed incorrect display of "Next Start".
* Compacted the displays of times in the CLI.
* Added two new functions (ast_sip_sched_task_get_times2,
ast_sip_sched_task_get_times_by_name2) that retrieve the interval,
next start time, and next run time in addition to the times already
returned by ast_sip_sched_task_get_times().
Change-Id: Ie718ca9fd30490b8a167bedf6b0b06d619dc52f3
This avoids the inclusion of the OpenSSL headers in the public header,
which avoids one external library dependency in res_pjsip_stir_shaken.
Change-Id: I6a07e2d81d2b5442e24e99b8cc733a99f881dcf4
pjproject returns the dialog locked and with a reference. However,
in Asterisk the method that handles this decrements the reference
and removes the lock prior to returning. This makes it possible,
under some circumstances, for another thread to free said dialog
before the thread that created it attempts to use it again. Of
course when the thread that created it tries to use a freed dialog
a crash can occur.
This patch makes it so Asterisk now returns the newly created
dialog both locked, and with an added reference. This allows the
caller to de-reference, and unlock the dialog when it is safe to
do so.
In the case of a new SIP Invite the lock, and reference are now
held for the entirety of the new invite handling process.
Otherwise it's possible for the dialog, or its dependent objects,
like the transaction, to disappear. For example if there is a TCP
transport error.
ASTERISK-29057 #close
Change-Id: I5ef645a47829596f402cf383dc02c629c618969e
If Asterisk sends out and INVITE and receives a challenge with a
different nonce value each time, it will continually send out INVITEs,
even if the call is hung up. The endpoint must be configured for
outbound authentication in order for this to occur. A limit has been set
on outbound INVITEs so that, once reached, Asterisk will stop sending
INVITEs and the transaction will terminate.
ASTERISK-29013
Change-Id: I2d001ca745b00ca8aa12030f2240cd72363b46f7
This patch initializes a couple of local variables to some default values.
Interestingly, in the 'pj_status_t dlg_status' case the value not being
initialized caused memory to grow, and not be recovered, in the off nominal
path (at least on my machine).
Change-Id: I22ee65e1e1bff8efacea8a167c6c8428898523f7
Commit 44bb0858cb ("debugging: Add enough
to choke a mule") accidentally removed calls to
ast_sip_message_apply_transport when it was attempting to just add
debugging code.
The kiss of death was saying that there were no functional changes in
the commit comment.
This makes outbound calls that use the 'flow' transport mechanism fail,
since this call is used to relay headers into the outbound INVITE
requests.
ASTERISK-29124 #close
Change-Id: I0f3e32c2e8ac415e30b1d29966d75a1546f0526a
This changes the outgoing offer call preference
default option to match the behavior of previous
versions of Asterisk.
The additional advanced codec negotiation options
have also been removed from the sample configuration
and marked as reserved for future functionality in
XML documentation.
The codec preference options have also been fixed to
enforce local codec configuration.
ASTERISK-29109
Change-Id: Iad19347bd5f3d89900c15ecddfebf5e20950a1c2
Added debug logging categories that allow a user to output debug
information based on a specified category. This lets the user limit,
and filter debug output to data relevant to a particular context,
or topic. For instance the following categories are now available for
debug logging purposes:
dtls, dtls_packet, ice, rtcp, rtcp_packet, rtp, rtp_packet,
stun, stun_packet
These debug categories can be enable/disable via an Asterisk CLI command.
While this overrides, and outputs debug data, core system debugging is
not affected by this patch. Statements still output at their appropriate
debug level. As well backwards compatibility has been maintained with
past debug groups that could be enabled using the CLI (e.g. rtpdebug,
stundebug, etc.).
ASTERISK-29054 #close
Change-Id: I6e6cb247bb1f01dbf34750b2cd98e5b5b41a1849
(cherry picked from commit 56028426de)
When handling a send_message request to a non-existing endpoint, the response's
body is overriden and not properly freed.
ASTERISK-29108
Change-Id: Ie1d3d70065f80793445b60f5e4a7eb31b4b9c5c8
In the event that the desired extension already exists,
ast_add_extension2_lockopt() will free the 'data' it is passed before
returning an error, so we should not be freeing it ourselves.
Additionally, there were two places where ast_add_extension2_lockopt()
could return an error without also freeing the 'data' pointer, so we
add that.
ASTERISK-29097 #close
Change-Id: I904707aae55169feda050a5ed7c6793b53fe6eae
Stop advertising RFC2833 support on the rtp_engine when DTMF mode is
auto but no tel_event was found inside SDP file.
On an incoming call create_rtp will be called and when session->dtmf is
set to AST_SIP_DTMF_AUTO, the AST_RTP_PROPERTY_DTMF will be set without
looking at the SDP file.
Once get_codecs gets called we move the DTMF mode from RFC2833 to INBAND
but continued to advertise RFC2833 support.
This meant the native_rtp bridge would falsely consider the two channels
as compatible. In addition to changing the DTMF mode we now set or
remove the AST_RTP_PROPERTY_DTMF.
The property is checked in ast_rtp_dtmf_compatible and called by
native_rtp_bridge_compatible.
ASTERISK-29051 #close
Change-Id: I1e0c1e324598a437932c0b7836bcb626aba8e287
Arming response to both AST_SIP_SESSION_BEFORE_REDIRECTING and
AST_SIP_SESSION_BEFORE_MEDIA causes 302 to to be handled twice,
resulting in to 181 being generated.
Change-Id: I866e5461564644ffb8a5e12b6f1330b50a7b63ab
Only track our sample offset if we are playing a non-announcement file,
otherwise we will skip that number of samples when we start playing the
first MoH file.
ASTERISK-24329 #close
Change-Id: Ib6b3c84fcaa1063889ab38ba7e7fc50050a3ccfc
When constructing a stream name based on the media type
and position the allocated name was not being freed
causing a leak.
Change-Id: I52510863b24a2f531f0a55b440bb2c81844029de
The ast_sip_dialog_get_session function returns the session
with reference count increased. This was not taken into
account and was causing sessions to remain around when they
should not be.
ASTERISK-29089
Change-Id: I430fa721b0a824311a59effec6056e9ec528e3e8
Sometimes not play MOH on bridge.
ASTERISK-29081
Reported-by: Michal Hajek <michal.hajek@daktela.com>
Change-Id: I760c73e0c9be1d340303b5d1c18a00c4759e8232
The module description needs to be on the same line as the
AST_MODULE_INFO or it is not parsed correctly.
Change-Id: I9ba11df1415369790e8656fcb527bb2749373c21
Implemention of History-Info capable of interworking with Diversion
Header following RFC7544
ASTERISK-29027 #close
Change-Id: I2296369582d4b295c5ea1e60bec391dd1d318fa6
The recent 491 changes introduced a check to determine if the active
and pending topologies were equal and to suppress the re-invite if they
were. When a re-invite is sent for a COLP-only change, the pending
topology is NULL so that check doesn't happen and the re-invite is
correctly sent. Of course, sending the re-invite sets the pending
topology. If a 491 is received, when we resend the re-invite, the
pending topology is set and since we didn't request a change to the
topology in the first place, pending and active topologies are equal so
the topologies-equal check causes the re-invite to be erroneously
suppressed.
This change checks if the topologies are equal before we run the media
state resolver (which recreates the pending topology) so that when we
do the final topologies-equal check we know if this was a topology
change request. If it wasn't a change request, we don't suppress
the re-invite even though the topologies are equal.
ASTERISK-29014
Change-Id: Iffd7dd0500301156a566119ebde528d1a9573314
Added to:
* bridges/bridge_softmix.c
* channels/chan_pjsip.c
* include/asterisk/res_pjsip_session.h
* main/channel.c
* res/res_pjsip_session.c
There NO functional changes in this commit.
Change-Id: I06af034d1ff3ea1feb56596fd7bd6d7939dfdcc3
When both Asterisk and a UA send re-invites at the same time, both
send 491 "Transaction in progress" responses to each other and back
off a specified amount of time before retrying. When Asterisk
prepares to send its re-invite, it sets up the session's pending
media state with the new topology it wants, then sends the
re-invite. Unfortunately, when it received the re-invite from the
UA, it partially processed the media in the re-invite and reset
the pending media state before sending the 491 losing the state it
set in its own re-invite.
Asterisk also was not tracking re-invites received while an existing
re-invite was queued resulting in sending stale SDP with missing
or duplicated streams, or no re-invite at all because we erroneously
determined that a re-invite wasn't needed.
There was also an issue in bridge_softmix where we were using a stream
from the wrong topology to determine if a stream was added. This also
caused us to erroneously determine that a re-invite wasn't needed.
Regardless of how the delayed re-invite was triggered, we need to
reconcile the topology that was active at the time the delayed
request was queued, the pending topology of the queued request,
and the topology currently active on the session. To do this we
need a topology resolver AND we need to make stream named unique
so we can accurately tell what a stream has been added or removed
and if we can re-use a slot in the topology.
Summary of changes:
* bridge_softmix:
* We no longer reset the stream name to "removed" in
remove_all_original_streams(). That was causing multiple streams
to have the same name and wrecked the checks for duplicate streams.
* softmix_bridge_stream_sources_update() was checking the old_stream
to see if it had the softmix prefix and not considering the stream
as "new" if it did. If the stream in that slot has something in it
because another re-invite happened, then that slot in old might
have a softmix stream but the same stream in new might actually
be a new one. Now we check the new_stream's name instead of
the old_stream's.
* stream:
* Instead of using plain media type name ("audio", "video", etc) as
the default stream name, we now append the stream position to it
to make it unique. We need to do this so we can distinguish multiple
streams of the same type from each other.
* When we set a stream's state to REMOVED, we no longer reset its
name to "removed" or destroy its metadata. Again, we need to
do this so we can distinguish multiple streams of the same
type from each other.
* res_pjsip_session:
* Added resolve_refresh_media_states() that takes in 3 media states
and creates an up-to-date pending media state that includes the changes
that might have happened while a delayed session refresh was in the
delayed queue.
* Added is_media_state_valid() that checks the consistency of
a media state and returns a true/false value. A valid state has:
* The same number of stream entries as media session entries.
Some media session entries can be NULL however.
* No duplicate streams.
* A valid stream for each non-NULL media session.
* A stream that matches each media session's stream_num
and media type.
* Updated handle_incoming_sdp() to set the stream name to include the
stream position number in the name to make it unique.
* Updated the ast_sip_session_delayed_request structure to include both
the pending and active media states and updated the associated delay
functions to process them.
* Updated sip_session_refresh() to accept both the pending and active
media states that were in effect when the request was originally queued
and to pass them on should the request need to be delayed again.
* Updated sip_session_refresh() to call resolve_refresh_media_states()
and substitute its results for the pending state passed in.
* Updated sip_session_refresh() with additional debugging.
* Updated session_reinvite_on_rx_request() to simply return PJ_FALSE
to pjproject if a transaction is in progress. This stops us from
creating a partial pending media state that would be invalid later on.
* Updated reschedule_reinvite() to clone both the current pending and
active media states and pass them to delay_request() so the resolver
can tell what the original intention of the re-invite was.
* Added a large unit test for the resolver.
ASTERISK-29014
Change-Id: Id3440972943c611a15f652c6c569fa0e4536bfcb
Currently, it was not possible to create bridge with video_mode single.
This made hard to put the bridge in a vidoe_single mode.
So, added video_single option for Bridge creation using the ARI.
This allows create a bridge with video_mode single.
ASTERISK-29055
Change-Id: I43e720e5c83fc75fafe10fe22808ae7f055da2ae
Building on ASTERISK-25854. When the device requests hold by sending SDP with attribute recvonly, asterisk places the session in sendonly mode. When the device later requests to resume the call by using a re-INVITE excluding SDP, asterisk needs to change the sendonly mode to sendrecv again.
Change-Id: I60341ce3d87f95869f3bc6dc358bd3e8286477a6
When fixing issues uncovered by GCC10 a copy of the parker UUID
was removed accidentally. This change restores it so that the
subscription has the data it needs.
ASTERISK-29042
Change-Id: I7d396a14ea648bd26d3c363dd78e78bd386b544a
Properly bump reference on format object to avoid memory corruption on double free
ASTERISK-29040 #close
Change-Id: Ic5a7faabfe2ef965ddb024186e1de7ca4542e2a3
Adapt the response handler so it also called when 181 is received.
In the case 181 is received, also generate the 181 response.
ASTERISK-29001 #close
Change-Id: I73cfee46a8ca85371280ebdb38674f8fde7510df
Per the RFC when an outgoing re-INVITE is done we should
only terminate the dialog if a 481 or 408 is received.
ASTERISK-29033
Change-Id: I6c3ff513aa41005d02de0396ba820083e9b18503
Two changes of note in this patch:
* Use ast_file_read_dir instead of opendir/readdir/closedir
* If the files list should be sorted, do that at the end rather than as
we go which improves performance for large lists
Change-Id: Ic7e9c913c0f85754c99c74c9cf6dd3514b1b941f
The MoH class internal file vector is potentially being manipulated by
multiple threads at the same time without sufficient locking. Switch to
a reference counted list and operate on copies where necessary.
ASTERISK-28927 #close
Change-Id: I479c5dcf88db670956e8cac177b5826c986b0217
When reading in a codec preference configuration option
the value would be set on the respective option before
applying any default adjustments, resulting in the
configuration not being as expected.
This was exposed by the REST API push configuration as
it used the configuration returned by Asterisk to then do
a modification. In the case of codec preferences one of
the options had a transcode value of "unspecified" when the
defaults should have ensured it would be "allow" instead.
This also renames the options in other places that were
missed.
Change-Id: I4ad42e74fdf181be2e17bc75901c62591d403964
This change renames the codec preference endpoint options.
incoming_offer_codec_prefs becomes codec_prefs_incoming_offer
to keep the options together when showing an endpoint.
Change-Id: I6202965b4723777f22a83afcbbafcdafb1d11c8d
Fixed a memory allocation that was not passing in the correct size for
the struct in curl.c.
Change-Id: I5fb92fbbe84b075fa6aefa2423786df80e114c3a
(cherry picked from commit deaa3742dc)
When a bundled stream is removed, its bundle_group is reset to -1.
If that stream is later reused, the bundle parameters on session
media need to be reset correctly it could mistakenly be rebundled
with a stream that was removed and never reused. Since the removed
stream has no rtp instance, a crash will result.
Change-Id: Ie2b792220f9291587ab5f9fd123145559dba96d7
Statically configured contacts on an AOR don't have an expiration
time so when adding them to the resulting 200 OK if an endpoint
registers ensure they are marked as such.
ASTERISK-28995
Change-Id: I9f0e45eb2ccdedc9a0df5358634a19ccab0ad596
Currently, if the bridge has created by the ARI, the video_mode
parameter was
not shown in the BridgeCreated event correctly.
Fixed it and added video_mode shown in the 'bridge show <bridge id>'
cli.
ASTERISK-28987
Change-Id: I8c205126724e34c2bdab9380f523eb62478e4295
When dealing with a lot of video streams on WebRTC
the resulting SDPs can grow to be quite large. This
effectively doubles the maximum size to allow more
streams to exist.
The res_http_websocket module has also been changed
to use a buffer on the session for reading in packets
to ensure that the stack space usage is not excessive.
Change-Id: I31d4351d70c8e2c11564807a7528b984f3fbdd01
We read beyond the end of the buffer when copying the string out of the
buffer when we used ast_copy_string() because the original string was
not null terminated. Instead switch to ast_strndup() which does not
exhibit the same behavior.
ASTERISK-28975 #close
Change-Id: Ib4a75cffeb1eb8cf01136ef30306bd623e531a2a
Added a new configuration option for PJSIP endpoints - stir_shaken. If
set to yes, then STIR/SHAKEN support will be added to inbound and
outbound INVITEs. The default is no. Alembic has been updated to include
this option.
Previously the dialplan function was not trimming the whitespace from
the parameters it recieved. Now it does.
Also added a conditional that, when TEST_FRAMEWORK is enabled, the
timestamp in the identity header will be overlooked. This is just for
testing, since the testsuite will rely on a SIPp scenario with a preset
identity header to trigger the MISMATCH result.
Change-Id: I43d67f1489b8c1c5729ed3ca8d71e35ddf438df1
session_on_rx_response wasn't checking for a NULL dialog before
attempting to get the invite session from it.
Change-Id: Id13534375966cc2eb7f2b55717c9813c63c10065
Prior to making any modifications to the pjsip infrastructure
for ACN, I've added the tracing functions to the existing code.
This should make the final commit easier to review, but we can also
now run a "before and after" trace.
No functional changes were made with this commit.
Change-Id: Ia83a1a2687ccb96f2bc8a2a3928a5214c4be775c
This commit adds the endpoint options required to control
Advanced Codec Negotiation.
incoming_offer_codec_prefs
outgoing_offer_codec_prefs
incoming_answer_codec_prefs
outgoing_answer_codec_prefs
The documentation may need tweaking and some additional edits
added, especially for the "answer" prefs. That'll be handled
when things finalize.
This commit is safe to merge as it doens't alter any existing
functionality nor does it alter the previous codec negotiation
work which may now be obsolete.
Change-Id: I920ba925d7dd36430dfd2ebd9d82d23f123d0e11
Currently when the pjsip making an outgoing request, it keep adding the
rport parameter in a request message as a default.
This causes unexpected rport handle at the other end.
Added option for disable this behaviour in the pjsip.conf.
This is a system option, but working as a gloabl option.
ASTERISK-28959
Change-Id: I9596675e52a742774738b5aad5d1fec32f477abc
Do not return error if the client received ping frame
while looking for a string and just wait for another frame.
ASTERISK-28958 #close
Change-Id: I4d06b4827bd71e56cbaafc011ffdcef9f0332922
When using the PSJIP_MEDIA_OFFER dialplan function it was not
overriding an endpoint's configured codecs on refresh unless
they had a shared codec between the two.
This patch makes it so whatever is set using PJSIP_MEDIA_OFFER
is used when creating the SDP for a refresh no matter what.
ASTERISK-28878 #close
Change-Id: I0f7dc86fd0fb607c308e6f98ede303c54d1eacb6
The outbound proxy for an AOR was not being applied to
any statically configured Contacts. This resulted in the
OPTIONS requests being sent to the wrong target.
This change sets the outbound proxy on statically configured
contacts once the AOR configuration is done being
applied.
ASTERISK-28965
Change-Id: Ia60f3e93ea63f819c5a46bc8b54be2e588dfa9e0
1) Fix memory-leaks
Added code to release ast_events extracted from corosync and stasis messages
2) Clean stasis cache when a member of the corosync cluster leaves the group
Added code to remove from the stasis cache of the members remained on the
group all the messages with the EID of the left member.
If the device states of the left member remain in the stasis cache of other
members, they will not be updated anymore and high priority cached values,
like BUSY, will take precedence over current device states.
3) Stop corosync event propagation when node is not joined to the group
Updated dispatch_thread_handler code to detect when asterisk is not joined
to the corosync group and added some condition in publish_event_to_corosync
code to send corosync messages only when joined.
When a node is not joined its corosync daemon can't send messages:
the cpg_mcast_joined function append new messages to the FIFO buffer until
it's full and then it blocks indefinitely.
In this scenario if the stasis_message_cb callback, registered by
res_corosync to handle stasis messages, try to send a corosync messages,
the thread of the stasis thread-pool will be blocked until the node join
the corosync cluster.
ASTERISK-28888
Reported by: Università di Bologna - CESIA VoIP
Change-Id: Ie8e99bc23f141a73c13ae6fb1948d148d4de17f2
When a re-INVITE is received we create a new set of
streams that are then swapped in as the active streams.
We did not preserve the SDP label from the previous
streams, resulting in the label getting lost.
This change ensures that if an SDP label is present
on the previous stream then it is set on the new stream.
ASTERISK-28953
Change-Id: I9dd63b88b562fe96ce5c791a3dae5bcaca258445
The AMI action and CLI command did not take into account the properties
of full backend caching. This resulted in an expired object remaining
removed until a full backend update occurred, instead of having the
object updated when needed.
This change makes it so that the AMI action and CLI command for object
expire will now fail instead of putting the cache into an undesired
state. If full backend caching is enabled then only operations
which act on the entire cache are available.
ASTERISK-28942
Change-Id: Id662d888f177ab566c8e802ad583083b742d21f4
Integrated STIR/SHAKEN support with outgoing INVITEs. When an INVITE is
sent, the caller ID will be checked to see if there is a certificate
that corresponds to it. If so, that information will be retrieved and an
Identity header will be added to the SIP message. The format is:
header.payload.signature;info=<public_key_url>alg=ES256;ppt=shaken
Header, payload, and signature are all BASE64 encoded. The public key
URL is retrieved from the certificate. Currently the algorithm and ppt
are ES256 and shaken, respectively. This message is signed and can be
used for verification on the receiving end.
Two new configuration options have been added to the certificate object:
attestation and origid. The attestation is required and must be A, B, or
C. origid is the origination identifier.
A new utility function has been added as well that takes a string,
allocates space, BASE64 encodes it, then returns it, eliminating the
need to calculate the size yourself.
Change-Id: I1f84d6a5839cb2ed152ef4255b380cfc2de662b4
This patch makes the usual necessary changes when upgrading to a new
version pjproject. For instance, version number bump, patches removed
from third-party, new *.md5 file added, etc..
This patch also includes a change to the Asterisk pjproject Makefile to
explicitly create the 'source/pjsip-apps/lib' directory. This directory
is no longer there by default so needs to be added so the Asterisk
malloc debug can be built.
This patch also includes some minor changes to Asterisk that were a result
of the upgrade. Specifically, there was a backward incompatibility change
made in 2.10 that modified the "expires header" variable field from a
signed to an unsigned value. This potentially effects comparison. Namely,
those check for a value less than zero. This patch modified a few locations
in the Asterisk code that may have been affected.
Lastly, this patch adds a new macro PJSIP_MINVERSION that can be used to
check a minimum version of pjproject at compile time.
ASTERISK-28899 #close
Change-Id: Iec8821c6cbbc08c369d0e3cd2f14e691b41d0c81
If channelId parameters were passed in the body, the Asterisk doesn't parsing it correctly.
Fixed it to parse the channelId, other_channel_id parameter correclty.
ASTERISK-28948
Change-Id: I59b49161a94869169ee19c1ffab5afcef7026157
The "value" passed in when setting an RTP property determines
whether it should be enabled or disabled. The RTP send and
receive retrans props did not examine this to know if the
buffers should be enabled. They assumed they always should be.
This change makes it so that the "value" passed in is
respected.
ASTERISK-28939
Change-Id: I9244cdbdc5fd065c7f6b02cbfa572bc55c7123dc
When fax_gateway_framehook is called and a gateway hasn't already
been started, the framehook gets the t38 state for both the current
channel and the peer. That call trickles down to the channel
driver which determines the state. If either channel is hung up
(or in the process of being hung up), the channel driver's tech_pvt
is going to be NULL which, in the case of chan_pjsip, will cause a
segfault.
* Added a hangup check for both the channel and peer channel
before starting a fax gateway.
* Added a check for NULL tech_pvt to chan_pjsip_queryoption
so we don't attempt to reference a tech_pvt that's already
gone.
ASTERISK-28923
Reported by: Yury Kirsanov
Change-Id: I4e10e63b667bbb68c1c8623f977488f5d807897c
This patch fixes a few compile warnings/errors that now occur when using gcc
10+.
Also, the Makefile.rules check to turn off partial inlining in gcc versions
greater or equal to 8.2.1 had a bug where it only it only checked against
versions with at least 3 numbers (ex: 8.2.1 vs 10). This patch now ensures
any version above the specified version is correctly compared.
Change-Id: I54718496eb0c3ce5bd6d427cd279a29e8d2825f9
If parameters were passed in the body as JSON to the
create route they were not being parsed before checking
to ensure that required fields were set.
This change moves the parsing so it occurs before
checking.
ASTERISK-28940
Change-Id: I898b4c3c7ae1cde19a6840e59f498822701cf5cf
You cannot cast a pjsip_uri to a pjsip_sip_uri using pjsip_uri_get_uri,
without checking that it's a PJSIP_URI_SCHEME_IS_SIP(S).
ASTERISK-28936
Change-Id: I9f572b3677e4730458e9402719e580f8681afe2a
Integrated STIR/SHAKEN support with incoming INVITES. Upon receiving an
INVITE, the Identity header is retrieved, parsing the message to verify
the signature. If any of the parsing fails,
AST_STIR_SHAKEN_VERIFY_NOT_PRESENT will be added to the channel for this
caller ID. If verification itself fails,
AST_STIR_SHAKEN_VERIFY_SIGNATURE_FAILED will be added. If anything in
the payload does not line up with the SIP signaling,
AST_STIR_SHAKEN_VERIFY_MISMATCH will be added. If all of the above steps
pass, then AST_STIR_SHAKEN_VERIFY_PASSED will be added, completing the
verification process.
A new config option has been added to the general section for
stir_shaken.conf. "signature_timeout" is the amount of time a signature
will be considered valid. If an INVITE is received and the amount of
time between when it was received and when it was signed is greater than
signature_timeout, verification will fail.
Some changes were also made to signing and verification. There was an
error where the whole JSON string was being signed rather than the
header combined with the payload. This has been changed to sign the
correct thing. Verification has been changed to do this as well, and the
unit tests have been updated to reflect these changes.
A couple of utility functions have also been added. One decodes a BASE64
string and returns the decoded string, doing all the length calculations
for you. The other retrieves a string value from a header in a rdata
object.
Change-Id: I855f857be3d1c63b64812ac35d9ce0534085b913
In a particular fax gateway scenario whereby it would
have to translate using the read translation path on a
channel the frame being translated would be consumed.
When the frame is in the write path it is not permitted
to free the frame as the caller expects it to continue
to exist.
This change makes it so that the frame is only consumed
on the read path where it is acceptable to free it.
ASTERISK-28900
Change-Id: I011c321288a1b056d92b37c85e229f4a28ee737d
When writing tx messages to pcap files, Asterisk is using the wrong
pointer resulting in lots of wasted space. This patch fixes it to use
the correct pointer.
ASTERISK-28932 #close
Change-Id: I5b8253dd59a083a2ca2c81f232f1d14d33c6fd23
files
fwrite() does return the number of elements written and not the
number of bytes. However asterisk is currently comparing the return
value to the size of the written element what means that asterisk logs
five WARNING messages on every packet written to the pcap file.
This patch changes the code to check for the correct value, which will
always be 1.
ASTERISK-28921 #close
Change-Id: I2455032d9cb4c5a500692923f9e2a22e68b08fc2
When replacing the user portion of the Contact URI the code
was using the ephemeral pool instead of the tdata pool. This
could cause the Contact user value to become invalid after a
period of time.
The code will now use the tdata pool which persists for the
lifetime of the message instead.
ASTERISK-28794
Change-Id: I31e7b958e397cbdaeedd0ebb70bcf8dd2ed3c4d5
While asterisk is filtering out the x-ast-orig-host parameter from the
contact on response messages, it is not filtering it out from the
request URI and the to header on SIP requests (for example INVITE).
ASTERISK-28884 #close
Change-Id: Id032b33098a1befea9b243ca994184baecccc59e
When a configuration file in Asterisk is loaded
information about it is stored such that on a
reload it is not reloaded if nothing has changed.
This can be problematic when an error exists in
a configuration file in PJSIP since the error
will be output at start and not subsequently on
reload if the file is unchanged.
This change makes it so that if an error is
encountered when res_sorcery_config is loading
a configuration file a reload will always read
in the configuration file, allowing the error
to be seen easier.
Change-Id: If2e05a017570f1f5f4f49120da09601e9ecdf9ed
The flags of a previous selection could have been set within the
object 'srtp', for example, when the previous selection returned
failure after setting just 'some' flags. Now, not to clutter the
code, all possible flags are cleared first, and then the selected
flags are set as before.
ASTERISK-28903
Change-Id: I1b9d7aade7d5120244ce7e3a8865518cbd6e0eee
Added two unit tests, one for signing and another for verifying.
stir_shaken_sign checks to make sure that all the required parameters
are passed in and then signs the actual payload. If a signature is
produced and a payload returned as a result, the test passes.
stir_shaken_verify takes the signature from a signed payload to verify.
This unit test also verifies that all the required information is passed
in, and then attempts to verify the signature. If verification is
successful and a payload is returned, the test passes.
Change-Id: I9fa43380f861ccf710cd0f6b6c102a517c86ea13
The PJSIP packet logger now has the following CLI commands:
pjsip set logger pcap <filename>
When used this will create a pcap file containing the incoming
and outgoing SIP packets, in unencrypted form.
pjsip set logger verbose <on / off>
This allows you to toggle logging to verbose on and off.
pjsip set logger host <IP/subnet mask> add
This allows you to add an additional IP address or subnet
mask to logging, allowing you to log multiple instead of
just a single IP address or all traffic.
The normal "pjsip set logger host" CLI command has also been
expanded to allow subnet masks as well.
ASTERISK-28895
Change-Id: If5859161a72b0d7dd2d1f92d45bed88e0cd07d0e
A warning was triggered that there may be a problem regarding file
extension (which is correct and should not be set anyway). The warning
also appeared if there was dot within the path itself.
E.g.
[sales-queue-hold]
mode=playlist
entry=/var/www/domain.tld/moh/funky_music
The music played correctly but you get a warning message.
Now there will be a check if the position of a potential dot character
is after the last position of a slash character. This dot charachter
will be treated as a extension naming. Dots within the path then ignored.
ASTERISK-28892
Reported-By: Nicholas John Koch
Change-Id: I2ec35a613413affbf5fcc01c8c181eba24865b9e
This change adds the same variable functionality that
is available for originating a channel to the create
call. Now when creating a channel you can specify
dialplan variables to set instead of having to do another
API call.
ASTERISK-28896
Change-Id: If13997ba818136d7c070585504fc4164378aa992
1. Modify sip_resolve and sip_resolve_callback to request AAAA lookups
when an IPV6 transport type has been requested.
2. Rename all occurrences of pjsip_transport_get_type_name to
pjsip_transport_get_type_desc. This ensures that the log/debug info
shows whether the transport is IPv6 or IPv4.
3. Do not add the constant PJSIP_TRANSPORT_IPV6 to existing transport
types. This results in invalid values. Use a bitwise or instead.
ASTERISK-26780
Patches:
pjsip_resolver.c uploaded by Peter Sokolov (License #7070)
Change-Id: I8b1e298f8efa682d0a7644113258fe76d9889c58
Adds the "STIR_SHAKEN" dialplan function and an API call to add a
STIR_SHAKEN verification result to a channel. This information will be
held in a datastore on the channel that can later be queried through the
"STIR_SHAKEN" dialplan funtion to get information on STIR_SHAKEN results
including identity, attestation, and verify_result. Here are some
examples:
STIR_SHAKEN(count)
STIR_SHAKEN(0, identity)
STIR_SHAKEN(1, attestation)
STIR_SHAKEN(2, verify_result)
Getting the count can be used to iterate through the results and pull
information by specifying the index and the field you want to retrieve.
Change-Id: Ice6d52a3a7d6e4607c9c35b28a1f7c25f5284a82
Changed source and destination address fields in struct
pjsip_history_entry so that they are long enough to hold an IPv6
address.
ASTERISK-28854
Change-Id: Id65bb9aa961e9ecbcb500815e18170f774e34d3e
There are a lot of moving parts in this patch, but the focus of it is on
the verification of the signature using a public key located at the
public key URL provided in the JSON payload. First, we check the
database to see if we have already downloaded the key. If so, check to
see if it has expired. If it has, redownload from the URL. If we don't
have an entry in the database, just go ahead and download the public
key. The expiration is tested each time we download the file. After
that, read the public key from the file and use it to verify the
signature. All sanity checking is done when the payload is first
received, so the verification is complete once this point is reached.
The XML has also been added since a new config option was added to
general (curl_timeout). The maximum amount of time to wait for a
download can be configured through this option, with a low value by
default.
Change-Id: I3ba4c63880493bf8c7d17a9cfca1af0e934d1a1c
Recently code accessing nochecksums variable has been added without including #ifdef SO_NO_CHECK protection, while the variable is created only when such constant is defined.
ASTERISK-28852 #close
Change-Id: I381718893b80599ab8635f2b594a10c1000d595e
Some places in Asterisk did not treat the formats on a stream
as immutable when they are.
The ast_stream_get_formats function is now const to enforce this
and parts of Asterisk have been updated to take this into account.
Some violations of this were also fixed along the way.
An additional minor tweak is that streams are now allocated with
an empty format capabilities structure removing the need in various
places to check that one is present on the stream.
ASTERISK-28846
Change-Id: I32f29715330db4ff48edd6f1f359090458a9bfbe
Fixed it to copy the entire string from the requested endpoint body except tech-prefix.
ASTERISK-28847
Change-Id: I91b5f6708a1200363f3267b847dd6a0915222c25
This change fixes a few re-negotiation issues
uncovered with fax.
1. The fax support uses its own mechanism for
re-negotiation by conveying T.38 information in
its own frames. The new support for re-negotiating
when adding/removing/changing streams was also
being triggered for this causing multiple re-INVITEs.
The new support will no longer trigger when
transitioning between fax.
2. In off-nominal re-negotiation cases it was
possible for some state information to be left
over and used by the next re-negotiation. This
is now cleared.
ASTERISK-28811
ASTERISK-28839
Change-Id: I8ed5924b53be9fe06a385c58817e5584b0f25cc2
MODULEINFO is checked while buidling/linking the module.
AST_MODULE_INFO is checked while loading/running the module.
ASTERISK-28838
Change-Id: I4bb868532ca217fec1351885d99eb55c21b58042
When the receive buffer was flushed by a received packet while it
already contained a packet with the same sequence number, Asterisk
never left the while loop which tried to order the packets.
This change makes it so if the packet is in the receive buffer it
is retrieved and freed allowing the buffer to empty.
ASTERISK-28827
Change-Id: Idaa376101bc1ac880047c49feb6faee773e718b3
When the ast_data_buffer_put rejects to add a packet, for example because
the buffer already contains a packet with the same sequence number, the
payload will never be freed, resulting in a memory leak.
The data buffer will now return an error if this situation occurs
allowing the caller to free the payload. The res_rtp_asterisk module
has also been updated to do this.
ASTERISK-28826
Change-Id: Ie6c49495d1c921d5f997651c7d0f79646f095cf1
By using pjproject to give us a list of candidates, and then filtering,
if the host has >32 addresses configured, then it is possible that we
end up filtering out all 32 of those, and ending up with no candidates
at all. Instead, get getifaddrs (which pjsip is using underlying
anyway) to retrieve all local addresses, and iterate those, adding the
first 32 addresses not excluded by the ICE ACL.
In our setup at any point in time We've got between 6 and 328 addresses
on any given system. The lower limit is the lower limit but the upper
limit is growing on a near daily basis currently.
Change-Id: I109eaffc3e2b432f00bf958e3caa0f38cacb4edb
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
This reverts commit a3a2fbaec6.
Reason for revert: There is a lot of code that relies on the broken
behavior that this fixes.
Change-Id: I410c395a0168acbdaf89e616e3cb5e1312d190cb
When an AOR is modified endpoints are updated that reference
the AOR so they can start receiving updates and reflect the
correct state. If this is the case then we shouldn't change
the endpoint to be offline if it does not reference the AOR
but instead only when the endpoint is completely updated for
all its AORs.
ASTERISK-28056
patches:
pjsip_options-aor.diff submitted by jhord (license 6978)
Change-Id: I3ee00023be2393113cd4e056599f23f3499ef164
This unit test runs through combinations of...
* Local codecs
* Remote Codecs
* Codec Preference
* Incoming/Outgoing
A few new APIs were created to make it easier to test
the functionality but didn't result in any actual
functional change.
ASTERISK_28777
Change-Id: Ic8957c43e7ceeab0e9272af60ea53f056164f164
Based on this new endpoint setting, a joint list of preferred codecs
between those received from the Asterisk core (remote), and those
specified in the endpoint's "allow" parameter (local) is created and
is used to create the outgoing SDP offer.
* Add outgoing_call_offer_pref to pjsip_configuration (endpoint)
* Add "call_direction" to res_pjsip_session.
* Update pjsip_session_caps.c to make the functions more generic
so they could be used for both incoming and outgoing.
* Update ast_sip_session_create_outgoing to create the
pending_media_state->topology with the results of
ast_sip_session_create_joint_call_stream().
* The endpoint "preferred_codec_only" option now automatically sets
AST_SIP_CALL_CODEC_PREF_FIRST in incoming_call_offer_pref.
* A helper function ast_stream_get_format_count() was added to
streams to return the current count of formats.
ASTERISK-28777
Change-Id: Id4ec0b4a906c2ae5885bf947f101c59059935437
This change provides functions that take in a JSON payload, verify that
the contents contain all the mandatory fields and required values (if
any), and signs the payload with the private key. Four fields are added
to the payload: x5u, attest, iat, and origid. As of now, these are just
placeholder values that will be set to actual values once the logic is
implemented for what to do when an actual payload is received, but the
functions to add these values have all been implemented and are ready to
use. Upon successful signing and the addition of those four values, a
ast_stir_shaken_payload is returned, containing other useful information
such as the algorithm and signature.
Change-Id: I74fa41c0640ab2a64a1a80110155bd7062f13393
RFC5621 requires any content type with a Content-Disposition
with handling=required to be rejected with a 415 response
ASTERISK-28782 #close
Change-Id: Iad969df75936730254b95c1a8bc3b48497070bb4
When an outgoing channel is created a list of formats may
optionally be provided which is used as a request that the
formats be used if possible. If an endpoint is not configured
for any of the formats we ignore this request and use what is
configured. This has the side effect of also including other
stream types (such as video) that were not present in the
requested formats.
This change makes it so that the intention of the request is
preserved - that is if only an audio format is requested then
even if there is no joint audio format between the request and
the configuration we will still only place an audio stream in
the outgoing call.
ASTERISK-28787
Change-Id: Ia54c0c63e94aca176169b9bae4bb8a8380ea245f
This commit sets up some of the initial framework for the module and
adds a way to read the private key from the specified file, which will
then be appended to the certificate object. This works fine for now, but
eventually some other structure will likely need to be used to store all
this information. Similarly, the caller_id_number is specified on the
certificate config object, but in the end we will want that information
to be tied to the certificate itself and read it from there.
A method has been added that will retrieve the private key associated
with the caller_id_number passed in. Tab completion for certificates and
stores has also been added.
Change-Id: Ic4bc1416fab5d6afe15a8e2d32f7ddd4e023295f
When examining a stream to determine hold/unhold information we
only care about the default audio stream. Other streams aren't
used for hold/unhold.
ASTERISK-28784
Change-Id: I7a1f10f07822c4aee1f98a38b9628849b578afe4
When the Asterisk receives 200 OK with invalid SDP,
the Asterisk/PJPROJECT terminating the session.
But if the channel was in the Bridge, Asterisk tries send
the Re-Invite before terminating the session.
And when the Asterisk sending the Re-Invite, it doesn't check
the SDP is NULL or not. This crashes the Asterisk.
Fixed it to close the session correctly if the UAS sends the
200 OK with wrong SDP.
ASTERISK-28743
Change-Id: Ifa864e0e125b1a7ed2f3abd4164187e1dddc56da
The state of the default audio stream is used for hold/unhold so we
restrict it to sendrecv as the core does not handle when it changes as
a result of hold/unhold.
This restriction does not apply to other media types though so we now
only restrict it to audio. This allows the other default streams to
store their state at all values, and not just sendrecv and removed.
ASTERISK-28783
Change-Id: I139740f38cea7f7d92a876ec2631ef50681f6625
Do not hang up a PJSIP channel on RTP timeout if that channel is in
a direct-media bridge. Also reset the time of the last received RTP packet when
direct-media ends (wait full rtp_timeout period before checking first time after
audio came back to Asterisk).
ASTERISK-28774
Reported-by: Michael Neuhauser
Change-Id: I8b62012be7685849e8fb2b1c5dd39d35313ca2d1
A pure blacklist is not good enough, we need a whitelist mechanism as
well, and the simplest way to do that is to re-use existing ACL
infrastructure.
This makes it simpler to blacklist say an entire block (/24) except a
smaller block (eg, a /29 or even a /32). Normally you'd need to
recursively split the block, so if you want to blacklist a /24 except
for a /29 you'd end up with a blacklit for a /25, /26, /27 and /28. I
feel that having an ACL instead of a blacklist only is clearer.
Change-Id: Id57a8df51fcfd3bd85ea67c489c85c6c3ecd7b30
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
bridge_p2p_rtp_write will forward rtp to the bridged rtp instance
without modifying the ssrc. However, it is not updating the SSRC
in the bridged rtp. Thus, when SSRC packets are generated, they
have the correct SSRC for the sender.
ASTERISK-28773 #close
Change-Id: I39f923bde28ebb4f0fddc926b92494aed294a478
If ICE support is enabled but not negotiated, the rtp->ice structure is
not being destroyed. This leads to Asterisk waiting for ICE to complete
instead of immediately starting the DTLS handshake, resulting in the
call leg having no RTP.
ASTERISK-28769 #close
Change-Id: I17c137546dc9ecfb9583c24dcf4c2ced8bbd7a27
This change introduce a CLI command for the RTP to display the general
configuration.
In the first step add the follow fields of the configurations:
- rtpstart
- rtpend
- dtmftimeout
- rtpchecksum
- strictrtp
- learning_min_sequential
- icesupport
Change-Id: Ibe5450898e2c3e1ed68c10993aa1ac6bf09b821f
Add a new option, incoming_call_offer_pref, to res_pjsip endpoints that
specifies the preferred order of codecs after receiving an offer.
This patch does the following:
Adds a new enumeration, ast_sip_call_codec_pref, used by the the new
configuration option that's added to the endpoint media structure.
Adds a new ast_sip_session_caps structure that's set for each session media
object.
Creates a new file, res_pjsip_session_caps that "implements" the new
structure and option, and is compiled into the res_pjsip_session library.
ASTERISK-28756 #close
Change-Id: I35e7a2a0c236cfb6bd9cdf89539f57a1ffefc76f
Alexander Traud
Ivan Poddubnyi
Sean Bright
roadkill
Boris P. Korzun
Robert Cripps
Jean Aunis
George Joseph
Nick French
Richard Mudgett
Sungtae Kim
Torrey Searle
Pirmin Walthert
Joshua C. Colp
Nathan Bruning
Stanislav
Alexander Greiner-Baer
Kevin Harwell
Ben Ford
Kevin Harwell
Holger Hans Peter Freyther
lvl
Michal Hajek
Patrick Verzele
Nickolay Shmyrev
sungtae kim
Università di Bologna - CESIA VoIP
Moises Silva
Walter Doekes
Nicholas John Koch
Roger James
Guido Falsi
DanielYK
bernard merindol
Jaco Kroon
Torrey Searle
Michael Neuhauser
Rodrigo Ramírez Norambuena