162 Commits (6c9e8afd4ea55a33680ee580658230b51f307292)

Author	SHA1	Message	Date
Torrey Searle	a2dde59154	res_rtp_asterisk: Make P2P bridge Asymmetric codec aware ... Introduce a new property to rtp-engine to make it aware of the desire for assymetric codecs or not. If asymmetric codecs is not allowed, the bridge will compare read/write formats and shut down the p2p bridge if needed ASTERISK-26745 #close Change-Id: I0d9c83e5356df81661e58d40a8db565833501a6f	8 years ago
Torrey Searle	65c560894d	chan_pjsip: add a new function PJSIP_DTMF_MODE ... This function is a replica of SIPDtmfMode, allowing the DTMF mode of a PJSIP call to be modified on a per-call basis ASTERISK-27085 #close Change-Id: I20eef5da3e5d1d3e58b304416bc79683f87e7612	8 years ago
Joshua Colp	a6eb9ee7d2	core: Add VP9 passthrough support. ... This change adds VP9 as a known codec and creates a cached "vp9" media format for use. Change-Id: I025a93ed05cf96153d66f36db1839109cc24c5cc	8 years ago
Kevin Harwell	7da6ddda30	res_pjsip: Add "webrtc" configuration option ... This patch creates a new configuration option called "webrtc". When enabled it defaults and enables the following options that are needed in order for webrtc to work in Asterisk: rtcp-mux, use_avpf, ice_support, and use_received_transport=enabled media_encryption=dtls dtls_verify=fingerprint dtls_setup=actpass When "webrtc" is enabled, this patch also parses the "msid" media level attribute from an SDP. It will also appropriately add it onto the outgoing session when applicable. Lastly, when "webrtc" is enabled h264 RTCP FIR feedback frames are now sent. ASTERISK-27119 #close Change-Id: I5ec02e07c5d5b9ad86a34fdf31bf2f9da9aac6fd	8 years ago
Jenkins2	0f45c979a3	Merge "res_rtp_asterisk / res_pjsip: Add support for BUNDLE."	8 years ago
Joshua Colp	065c3005ad	res_rtp_asterisk / res_pjsip: Add support for BUNDLE. ... BUNDLE is a specification used in WebRTC to allow multiple streams to use the same underlying transport. This reduces the number of ICE and DTLS negotiations that has to occur to 1 normally. This change implements this by adding support for it to the RTP SDP module in PJSIP. BUNDLE can be turned on using the "bundle" option and on an offer we will offer to bundle streams together. On an answer we will accept any bundle groups provided. Once accepted each stream is bundled to another RTP instance for transport. For the res_rtp_asterisk changes the ability to bundle an RTP instance to another based on the SSRC received from the remote side has been added. For outgoing traffic if an RTP instance is bundled to another we will use the other RTP instance for any transport related things. For incoming traffic received from the transport instance we look up the correct instance based on the SSRC and use it for any non-transport related data. ASTERISK-27118 Change-Id: I96c0920b9f9aca7382256484765a239017973c11	8 years ago
Jenkins2	d2b32cd009	Merge "chan_pjsip: Fix ability to send UPDATE on COLP"	8 years ago
George Joseph	c0c99c7618	chan_pjsip: Fix ability to send UPDATE on COLP ... When connected_line_method is "invite", we're supposed to determine if the client can support UPDATE and if it can, send UPDATE instead of INVITE to avoid the SDP renegotiation. Not only was pjproject not setting the PJSIP_INV_SUPPORT_UPDATE flag, we were testing that invite_tsx wasn't NULL which isn't always the case. * Updated chan_pjsip/update_connected_line_information to drop the requirement that invite_tsx isn't NULL. * Submitted patch to pjproject sip_inv.c that sets the PJSIP_INV_SUPPORT_UPDATE flag correctly. * Updated pjsip.conf.sample to clarify what happens when "invite" is specified. ASTERISK-27095 Change-Id: Ic2381b3567b8052c616d96fbe79564c530e81560	8 years ago
Torrey Searle	fb7247c57c	res_pjsip: Add DTMF INFO Failback mode ... The existing auto dtmf mode reverts to inband if 4733 fails to be negotiated. This patch adds a new mode auto_info which will switch to INFO instead of inband if 4733 is not available. ASTERISK-27066 #close Change-Id: Id185b11e84afd9191a2f269e8443019047765e91	8 years ago
Mark Michelson	45df25a579	chan_pjsip: Add support for multiple streams of the same type. ... The stream topology (list of streams and order) is now stored with the configured PJSIP endpoints and used during the negotiation process. Media negotiation state information has been changed to be stored in a separate object. Two of these objects exist at any one time on a session. The active media state information is what was previously negotiated and the pending media state information is what the media state will become if negotiation succeeds. Streams and other state information is stored in this object using the index (or position) of each individual stream for easy lookup. The ability for a media type handler to specify a callback for writing has been added as well as the ability to add file descriptors with a callback which is invoked when data is available to be read on them. This allows media logic to live outside of the chan_pjsip module. Direct media has been changed so that only the first audio and video stream are directly connected. In the future once the RTP engine glue API has been updated to know about streams each individual stream can be directly connected as appropriate. Media negotiation itself will currently answer all the provided streams on an offer within configured limits and on an offer will use the topology created as a result of the disallow/allow codec lines. If a stream has been removed or declined we will now mark it as such within the resulting SDP. Applications can now also request that the stream topology change. If we are told to do so we will limit any provided formats to the ones configured on the endpoint and send a re-invite with the new topology. Two new configuration options have also been added to PJSIP endpoints: max_audio_streams: determines the maximum number of audio streams to offer/accept from an endpoint. Defaults to 1. max_video_streams: determines the maximum number of video streams to offer/accept from an endpoint. Defaults to 1. ASTERISK-27076 Change-Id: I8afd8dd2eb538806a39b887af0abd046266e14c7	8 years ago
Jenkins2	abe1dd3039	Merge "pjsip: Extend 'asymmetric_rtp_codec' option to include us changing."	8 years ago
Joshua Colp	5b80496b42	chan_pjsip: Update device state when in early media. ... The chan_pjsip module uses a calculation approach for determining device state. This means that in situations where we would expect device state to change we need to tell the core to query. A scenario that was missed is when early media was signaled. This change adds the notification for the core to query device state when we are told that early media is being provided. ASTERISK-27039 Change-Id: Iafebfd152894966344ff2e950a3cee9f59a3eb6f	8 years ago
Joshua Colp	d3e951edf5	pjsip: Extend 'asymmetric_rtp_codec' option to include us changing. ... PJSIP support in Asterisk differs from chan_sip in that it allows media to be sent as-is without transcoding provided the codecs were negotiated in the SDP. This is allowed according to the RFC. Support for this differs quite a lot though and some endpoints do not handle it well. This change extends the 'asymmetric_rtp_codec' option to also cover this case. When set to no (the default) the code behaves as chan_sip does - the best codec is selected and we will only ever send that, unless we change what we are sending if the remote side changes. When set to yes we will send media as-is without transcoding if the codec has been negotiated in the SDP. ASTERISK-26996 Change-Id: Ib1647f6902a0843e8c435946f831c2159e8d1d51	8 years ago
George Joseph	d6b2a58736	res_pjsip_session: Add cleanup to ast_sip_session_terminate ... If you use ast_request to create a PJSIP channel but then hang it up without causing a transaction to be sent, the session will never be destroyed. This is due ot the fact that it's pjproject that triggers the session cleanup when the transaction ends. app_chanisavail was doing this to get more granular channel state and it's also possible for this to happen via ARI. * ast_sip_session_terminate was modified to explicitly call the cleanup tasks and unreference session if the invite state is NULL AND invite_tsx is NULL (meaning we never sent a transaction). * chan_pjsip/hangup was modified to bump session before it calls ast_sip_session_terminate to insure that session stays valid while it does its own cleanup. * Added test events to session_destructor for a future testsuite test. ASTERISK-26908 #close Reported-by: Richard Mudgett Change-Id: I52daf6f757184e5544c261f64f6fe9602c4680a9	9 years ago
George Joseph	747beb1ed1	modules: change module LOAD_FAILUREs to LOAD_DECLINES ... In all non-pbx modules, AST_MODULE_LOAD_FAILURE has been changed to AST_MODULE_LOAD_DECLINE. This prevents asterisk from exiting if a module can't be loaded. If the user wishes to retain the FAILURE behavior for a specific module, they can use the "require" or "preload-require" keyword in modules.conf. A new API was added to logger: ast_is_logger_initialized(). This allows asterisk.c/check_init() to print to the error log once the logger subsystem is ready instead of just to stdout. If something does fail before the logger is initialized, we now print to stderr instead of stdout. Change-Id: I5f4b50623d9b5a6cb7c5624a8c5c1274c13b2b25	9 years ago
Norbert Varga	75f8167e66	chan_pjsip: Multidomain endpoint finding on call ... When PJSIP tries to call an endpoint with a domain (e.g. 1000@test.com), the user part is stripped down as it would be a trunk with a specified user, and only the host part is called as a PJSIP endpoint and can't be found. This is not correct in the case of a multidomain SIP account, so the stripping after the @ sign is done only if the whole endpoint (in multidomain case 1000@test.com) can't be found. ASTERISK-26248 Change-Id: I3a2dd6f57f3bd042df46b961eccd81d31ab202e6	9 years ago
Alexei Gradinari	e5e887be53	chan_pjsip: fix switching sending codec when asymmetric_rtp_codec=no ... The sending codec is switched to the receiving codec and then is switched back to the best native codec on EVERY receiving RTP packets. This is because after call of ast_channel_set_rawwriteformat there is call of ast_set_write_format which calls set_format which sets rawwriteformat to the best native format. This patch adds a new function ast_set_write_format_path which set specific write path on channel and uses this function to switch the sending codec. ASTERISK-26603 #close Change-Id: I5b7d098f8b254ce8f45546e6c36e5d324737f71d	9 years ago
zuul	0ec5abe592	Merge "Remove ASTERISK_REGISTER_FILE."	9 years ago
Joshua Colp	24d0907849	Merge "pjsip: Fix a few media bugs with reinvites and asymmetric payloads."	9 years ago
Corey Farrell	a6e5bae3ef	Remove ASTERISK_REGISTER_FILE. ... ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes all traces of it. Previously exported symbols removed: * __ast_register_file * __ast_unregister_file * ast_complete_source_filename This also removes the mtx_prof static variable that was declared when MTX_PROFILE was enabled. This variable was only used in lock.c so it is now initialized in that file only. ASTERISK-26480 #close Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966	9 years ago
Joshua Colp	aed6c219a3	pjsip: Fix a few media bugs with reinvites and asymmetric payloads. ... When channel format changes occurred as a result of an RTP re-negotiation the bridge was not informed this had happened. As a result the bridge technology was not re-evaluated and the channel may have been in a bridge technology that was incompatible with its formats. The bridge is now unbridged and the technology re-evaluated when this occurs. The chan_pjsip module also allowed asymmetric codecs for sending and receiving. This did not work with all devices and caused one way audio problems. The default has been changed to NOT do this but to match the sending codec to the receiving codec. For users who want asymmetric codecs an option has been added, asymmetric_rtp_codec, which will return chan_pjsip to the previous behavior. The codecs returned by the chan_pjsip module when queried by the bridge_native_rtp module were also not reflective of the actual negotiated codecs. The nativeformats are now returned as they reflect the actual negotiated codecs. ASTERISK-26423 #close Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc	9 years ago
Alexei Gradinari	2b9ad3a5f7	chan_pjsip: segfault on already disconnected session ... On heavy loaded system the TCP/TLS incoming calls could be disconnected by pjproject while these calls are being processed by asterisk. This patch uses functions pjsip_inv_add_ref/pjsip_inv_dec_ref to inform pjproject that an INVITE session is in use. ASTERISK-26482 #close Change-Id: Ia2e3e2f75358cdb530252a9ce158af3d5d9fdf33	9 years ago
Aaron An	18a8ca06eb	channels/chan_pjsip: fix HANGUPCAUSE function bug. ... HANGUPCAUSE not return 'SIP 200 Ok' when dialed channel answered. This patch change the call order of ast_queue_control_data and ast_queue_control in chan_pjsip_incoming_response. ASTERISK-26396 #close Reported by: AaronAn Tested by: AaronAn Change-Id: Ide2d31723d8d425961e985de7de625694580be61	9 years ago
Matt Jordan	c315460abb	channels/chan_pjsip: Add PJSIP_SEND_SESSION_REFRESH ... This patch adds a new PJSIP specific dialplan function, PJSIP_SEND_SESSION_REFRESH. When invoked on a PJSIP channel, the media session will be refreshed via either an UPDATE or re-INVITE request. When used in conjunction with the PJSIP_MEDIA_OFFER dialplan function, the formats in use on a PJSIP channel can be re-negotiated and changed dynamically after call setup. ASTERISK-26277 #close Change-Id: Ib98fe09ba889aafe26d58d32f0fd1323f8fd9b1b (cherry picked from commit eec60dd773)	9 years ago
zuul	ba2da66bd5	Merge "chan_pjsip.c: Fix deadlock potential in fax redirection."	9 years ago
Richard Mudgett	3db468ea9e	chan_pjsip.c: Fix deadlock potential in fax redirection. ... The chan_pjsip_cng_tone_detected() has the potential to deadlock if an incoming fax happens during the Playback or similar application. * Fixed the potential deadlock by not calling ast_async_goto() with the channel lock held. * Made always eat the fax detection frame whether there is a fax extension or not. ASTERISK-26216 Reported by: Richard Mudgett Change-Id: I32aecbb4818af646dc5a619f0dc040e9b1f222e5	9 years ago
Richard Mudgett	e739888d99	res_pjsip: Add fax_detect_timeout endpoint option. ... The new endpoint option allows the PJSIP channel driver's fax_detect endpoint option to timeout on a call after the specified number of seconds into a call. The new feature is disabled if the timeout is set to zero. The option is disabled by default. ASTERISK-26214 Reported by: Richard Mudgett Change-Id: Id5a87375fb2c4f9dc1d4b44c78ec8735ba65453d	9 years ago
Richard Mudgett	656ed73ac6	res_pjsip: Add missing NULL checks when using pjsip_inv_end_session(). ... pjsip_inv_end_session() is documented as being able to return the passed in tdata parameter set to NULL on success. Change-Id: I09d53725c49b7183c41bfa1be3ff225f3a8d3047	9 years ago
Mark Michelson	cdb7edbe7b	chan_pjsip: Lock channel when checking for RTP changes. ... bridge_native_rtp can call into an RTP-capable channel driver in order for the driver to update information about who the channel is communicating with. For SIP channel drivers, this means deactivating RTCP and sending a reinvite so that the endpoints can communicate directly. bridge_native_rtp does the right thing and has the channel locked when calling into the channel driver. chan_pjsip can't alter session properties in this thread, though. chan_pjsip queues a task on the session serializer in order to update properties there. The problem is that this queued task was not locking the channel. This meant that the queued task could attempt to deactivate RTCP at the same time that the channel thread was attempting to process an incoming RTCP packet. This could lead to a crash. This patch fixes the issue by locking the channel in the queued task when altering RTP properties. ASTERISK-26092 #close Reported by Niklas Larsson Change-Id: I3464e226a3c41f6b915f97891e07fa1599e2a159	9 years ago
George Joseph	c4064727d2	chan_pjsip: Add 'pjsip show channelstats' ... Added the ability to show channel statistics to chan_pjsip (cli_functions.c) Moved the existing 'pjsip show channel(s)' functionality from pjsip_configuration to cli_functions.c. The stats needed chan_pjsip's private header so it made sense to move the existing channel commands as well. Now using stasis_cache_dump to get the channel snapshots rather than retrieving all endpoints, then getting each one's channel snapshots. Much more efficient. Change-Id: I03b114522126d27434030b285bf6d531ddd79869	10 years ago
Kevin Harwell	a3c9a74a02	chan_pjsip: ref leak when checking direct_media_glare ... Fix the reference leak introduced in the following commit: c534bd5807 ASTERISK-25849 Change-Id: I5cfefd5ee6c1c3a1715c050330aaa10e4d2a5e85	10 years ago
Kevin Harwell	c534bd5807	chan_pjsip: transfers with direct media reinvite has wrong address/port ... During a transfer involving direct media a race occurs between when the transferer channel is swapped out, initiating rtp changes/updates, and the subsequent reinvites. When Alice, after speaking with Charlie (Bob is on hold), connects Bob and Charlie invites are sent to each in order to establish the call between them. Bob is taken off hold and Charlie is told to have his media flow through Asterisk. However, if before those invites go out the bridge updates Bob's and/or Charlie's rtp information with direct media data (i.e. address, port) then the invite(s) will contain the remote data in the SDP instead of the Asterisk data. The race occurs in the native bridge glue code when updating the peer. The direct_media_address can get set twice before sending out the first invite during call connection. This can happen because the checking/setting of the direct_media_address happened in one thread while the sending of the invite(s) happened in another thread. This fix removes the race condition by moving the checking/setting of the direct_media_address to be in the same thread as the sending of the invites(s). This serializes the checking/setting and sending so they can no longer happen out of order. ASTERISK-25849 #close Change-Id: Idfea590175e74f401929a601dba0c91ca1a7f873	10 years ago
Matt Jordan	726ee873a6	chan_pjsip: Handle T.38 faxes with direct media bridges ... When a channel is in a direct media bridge, a re-INVITE may arrive that forces Asterisk to re-negotiate the media to a T.38 fax. When this occurs, the bridge must change its technology to a simple bridge, and re-INVITE the media back to Asterisk. Generally, this logic mostly already exists in Asterisk. However, prior to this patch, there were a few bugs: (1) The T.38 framehook currently prevents a channel capable of T.38 faxes from ever entering into a direct media bridge. This applies even when the only media being passed over the channel is audio. This patch fixes this bug by having the framehook specify that it defers caring about any frame type. This allows the channels to enter into a direct media bridge, which will be broken when a re-INVITE is received. (2) When a re-INVITE is received, nothing instructed the bridging layer to re-inspect the allowed bridging technology. This now occurs when either a re-INVITE is received from a peer, or when a response is received from the far end (that is, when the T.38 state changes to either T38_PEER_REINVITE or T38_LOCAL_REINVITE). (3) chan_pjsip needs to do a small amount of work to prevent a direct media bridge from being chosen when a T.38 session is in progress. When a T.38 session supplement has a t38 datastore - which is added when we detect we should start thinking about T.38 on a channel - we now refuse a native RTP bridge. (4) When a BYE request is received, we don't terminate the T.38 session. If the other side of a T.38 fax survives the hangup (due to the 'g' flag in Dial, for example), we don't currently re-INVITE the media on the other channel back to audio. This patch now has res_pjsip_t38 intercept BYE requests and inform the far side that the T.38 session is terminated. This naturally causes the correct re-INVITEs to be sent. ASTERISK-25582 Change-Id: Iabd6aa578e633d16e6b9f342091264e4324a79eb	10 years ago
Alexander Traud	cf79b62778	ast_format_cap_get_names: To display all formats, the buffer was increased. ... ASTERISK-25533 #close Change-Id: Ie1a9d1a6511b3f1a56b93d04475fbf8a4e40010a	10 years ago
Richard Mudgett	8fe9350b68	chan_pjsip: Fix crash on reINVITE before initial INVITE completes. ... Apparently some endpoints attempt to send a reINVITE before completing the initial INVITE transaction. In this case PJSIP responds appropriately to the reINVITE with a 491 INVITE request pending. Unfortunately chan_pjsip is using the initial INVITE transaction state to determine if an INVITE is the initial INVITE or a reINVITE. Since the initial INVITE transaction has not been confirmed yet chan_pjsip thinks the reINVITE is an initial INVITE and starts another PBX thread on the channel. The extra PBX thread ensures that hilarity ensues. * Fix checks for a reINVITE on incoming requests to look for the presence of a to-tag instead of the initial INVITE transaction state. * Made caller_id_incoming_request() determine what to do if there is a channel on the session or not. After a channel is created it is too late to just store the new party id on the session because the session's party id has already been copied to the channel's caller id. ASTERISK-25404 #close Reported by: Chet Stevens Change-Id: Ie78201c304a2b13226f3a4ce59908beecc2c68be	10 years ago
Debian Amtelco	c6b0d60264	chan_pjsip: Add Referred-By header to the PJSIP REFER packet. ... Some systems require the REFER packet to include a Referred-By header. If the channel variable SIPREFERREDBYHDR is set, it passes that value as the Referred-By header value. Otherwise, it adds the current dialog’s local info. Reported by: Dan Cropp Tested by: Dan Cropp Change-Id: I3d17912ce548667edf53cb549e88a25475eda245	10 years ago
Scott Griepentrog	87f04d5acf	PJSIP: avoid crash when getting rtp peer ... Although unlikely, if the tech private is returned as a NULL, chan_pjsip_get_rtp_peer() would crash. ASTERISK-25323 Change-Id: Ie231369bfa7da926fb2b9fdaac228261a3152e6a	10 years ago
Scott Griepentrog	490db8ba94	Chaos: make hangup NULL tolerant ... In chan_pjsip_new, if allocation of the pvt structure fails, ast_hangup is called. But it was written to assume pvt was valid, and this change corrects that. ASTERISK-25323 Reported by: Scott Griepentrog Change-Id: I5f47860fe9cee4cd56abd3f79b108678ab72cc87	10 years ago
Joshua Colp	309dd2a409	pjsip: Add rtp_timeout and rtp_timeout_hold endpoint options. ... This change adds support for the 'rtp_timeout' and 'rtp_timeout_hold' endpoint options. These allow the channel to be hung up if RTP is not received from the remote endpoint for a specified number of seconds. ASTERISK-25259 #close Change-Id: I3f39daaa7da2596b5022737b77799d16204175b9	10 years ago
Joshua Colp	649460aa44	chan_pjsip: Don't change formats when frame of unsupported format is received. ... Receipt of an RTP packet currently causes the formats on an PJSIP channel to change to the format of the RTP packet. In some off-nominal cases it's possible for this to be a format that has not been configured or negotiated. This change makes it so only formats explicitly configured on the endpoint are allowed. ASTERISK-25258 #close Change-Id: If93d641fb6418a285928839300d7854cab8c1020	10 years ago
Matt Jordan	bb00b26f35	chan_pjsip: Set the context and extension on the channel when created ... Prior to this patch, chan_pjsip was failing to pass the endpoint's context and the desired extension to the ast_channel_alloc_* routine. This caused a new channel snapshot to be issued without a context and extension, which can cause some reporting issues for users of AMI, CEL, and other APIs. The channel driver would later set the context and extension on the channel such that the channel would start in the correct location in the dialplan, but the information reported in the initial event would be incorrect. This patch modifies the channel driver such that it now passes the context and extension directly into the allocation routine. This provides the information in the new channel snapshot published over Stasis. ASTERISK-25156 #close Reported by: cloos Change-Id: Ic6f8542836e596db8f662071d118e8f934fdf25e	10 years ago
snuffy	17129d2c29	chan_pjsip: Fix crash during off-nominal when no endpoint specified. ... Add missing return -1 when no endpoint name is specified. ASTERISK-25086 #close Reported by: snuffy Change-Id: I9de76c2935a1f4e3f0cffe97a670106f5605e89e	11 years ago
Rodrigo Ramírez Norambuena	eec010829a	AST_MODULE_INFO: Format corrections to the usages of AST_MODULE_INFO macro. ... Change-Id: Icf88f9f861c6b2a16e5f626ff25795218a6f2723	11 years ago
Matt Jordan	4a58261694	git migration: Refactor the ASTERISK_FILE_VERSION macro ... Git does not support the ability to replace a token with a version string during check-in. While it does have support for replacing a token on clone, this is somewhat sub-optimal: the token is replaced with the object hash, which is not particularly easy for human consumption. What's more, in practice, the source file version was often not terribly useful. Generally, when triaging bugs, the overall version of Asterisk is far more useful than an individual SVN version of a file. As a result, this patch removes Asterisk's support for showing source file versions. Specifically, it does the following: * Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and remove passing the version in with the macro. Other facilities than 'core show file version' make use of the file names, such as setting a debug level only on a specific file. As such, the act of registering source files with the Asterisk core still has use. The macro rename now reflects the new macro purpose. * main/asterisk: - Refactor the file_version structure to reflect that it no longer tracks a version field. - Remove the "core show file version" CLI command. Without the file version, it is no longer useful. - Remove the ast_file_version_find function. The file version is no longer tracked. - Rename ast_register_file_version/ast_unregister_file_version to ast_register_file/ast_unregister_file, respectively. * main/manager: Remove value from the Version key of the ModuleCheck Action. The actual key itself has not been removed, as doing so would absolutely constitute a backwards incompatible change. However, since the file version is no longer tracked, there is no need to attempt to include it in the Version key. * UPGRADE: Add notes for: - Modification to the ModuleCheck AMI Action - Removal of the "core show file version" CLI command Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e	11 years ago
Richard Mudgett	c499cabf53	chan_pjsip/res_pjsip/bridge_softmix/core: Improve translation path choices. ... With this patch, chan_pjsip/res_pjsip now sets the native formats to the codecs negotiated by a call. * The changes in chan_pjsip.c and res_pjsip_sdp_rtp.c set the native formats to include all the negotiated audio codecs instead of only the initial preferred audio codec and later the currently received audio codec. * The audio frame handling in channel.c:ast_read() is more streamlined and will automatically adjust to changes in received frame formats. The new policy is to remove translation and pass the new frame format to the receiver except if the translation was to a signed linear format. A more long winded version is commented in ast_read() along with some caveats. * The audio frame handling in channel.c:ast_write() is more streamlined and will automatically adjust any needed translation to changes in the frame formats sent. Frame formats sent can change for many reasons such as a recording is being played back or the bridged peer changed the format it sends. Since it is a normal expectation that sent formats can change, the codec mismatch warning message is demoted to a debug message. * Removed the short circuit check in channel.c:ast_channel_make_compatible_helper(). Two party bridges need to make channels compatible with each other. However, transfers and moving channels among bridges can result in otherwise compatible channels having sub-optimal translation paths if the make compatible check is short circuited. A result of forcing the reevaluation of channel compatibility is that the asterisk.conf:transcode_via_slin and codecs.conf:genericplc options take effect consistently now. It is unfortunate that these two options are enabled by default and negate some of the benefits to the changes in channel.c:ast_read() by forcing translation through signed linear on a two party bridge. * Improved the softmix bridge technology to better control the translation of frames to the bridge. All of the incoming translation is now normally handled by ast_read() instead of splitting any translation steps between ast_read() and the slin factory. If any frame comes in with an unexpected format then the translation path in ast_read() is updated for the next frame and the slin factory handles the current frame translation. This is the final patch in a series of patches aimed at improving translation path choices. The other patches are on the following reviews: https://reviewboard.asterisk.org/r/4600/ https://reviewboard.asterisk.org/r/4605/ ASTERISK-24841 #close Reported by: Matt Jordan Review: https://reviewboard.asterisk.org/r/4609/ ........ Merged revisions 434671 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434672 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	8bae18ab93	res_pjsip: Add an 'auto' option for DTMF Mode ... This patch adds support for automatically detecting the type of DTMF that a PJSIP endpoint supports. When the 'dtmf_mode' endpoint option is set to 'auto', the channel created for an endpoint will attempt to determine if RFC 4733 DTMF is supported. If so, it will use that DTMF type. If not, the DTMF type for the channel will be set to inband. Review: https://reviewboard.asterisk.org/r/4438 ASTERISK-24706 #close Reported by: yaron nahum patches: yaron_patch_3_Feb.diff submitted by yaron nahum (License 6676) ........ Merged revisions 434637 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434638 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	b8fa8aa775	clang compiler warnings: Fix pointer-bool-converesion warnings ... This patch fixes several warnings pointed out by the clang compiler. * chan_pjsip: Removed check for data->text, as it will always be non-NULL. * app_minivm: Fixed evaluation of etemplate->locale, which will always evaluate to 'true'. This patch changes the evaluation to use ast_strlen_zero. * app_queue: - Fixed evaluation of qe->parent->monfmt, which always evaluates to true. Instead, we just check to see if the dereferenced pointer evaluates to true. - Fixed evaluation of mem->state_interface, wrapping it with a call to ast_strlen_zero. * res_smdi: Wrapped search_msg->mesg_desk_term with calls to ast_strlen_zero. Review: https://reviewboard.asterisk.org/r/4541 ASTERISK-24917 Reported by: dkdegroot patches: rb4541.patch submitted by dkdegroot (License 6600) ........ Merged revisions 434285 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 434286 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434287 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	ce59fabd5c	clang compiler warnings: Fix invalid enum conversion ... This patch fixes some invalid enum conversion warnings caught by clang. In particular: * chan_sip: Several functions mixed usage of the st_refresher_param enum and st_refresher enum. This patch corrects the functions to use the right enum. * chan_pjsip: Fixed mixed usage of ast_sip_session_t38state and ast_t38_state. * strings: Fixed incorrect usage of AO2 flags with strings container. * res_stasis: Change a return enumeration to stasis_app_user_event_res. Review: https://reviewboard.asterisk.org/r/4535 ASTERISK-24917 Reported by: dkdegroot patches: rb4535.patch submitted by dkdegroot (License 6600) ........ Merged revisions 433746 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 433747 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433748 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	d2776d4d45	clang compiler warnings: Fix a variety of "unused" warnings ... This patch fixes the -Wunused-value -Wunused-variable -Wunused-const-variable errors caught by clang. Specifically: * apps/app_queue.c: removed unused qpm_cmd_usage[], qum_cmd_usage[], qsmp_cmd_usage[] * cel/cel_sqlite3_custom.c: removed unused name[] = "cel_sqlite3_custom" * channels/chan_pjsip.c: removed unused desc[] = "PJSIP Channel" * codecs/gsm/src/gsm_create.c: removed unused ident[] = "$Header$" * funcs/func_env.c:729: Fixed ast_str_append_substr. * main/editline/np/strlcat.c: removed unused rcsid variable * main/editline/np/strlcpy.c: removed unused rcsid variable * main/security_events.c: removed unused TIMESTAMP_STR_LEN * utils/conf2ael.c: removed unused cfextension_states * utils/extconf.c: removed unused cfextension_states Review: https://reviewboard.asterisk.org/r/4526 ASTERISK-24917 Reported by: dkdegroot patches: rb4526.patch submitted by dkdegroot (License 6600) ........ Merged revisions 433693 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 433694 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433695 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	4c2fc5b811	chan_pjsip: Add "rpid_immediate" option to prevent unnecessary "180 Ringing" messages. ... Incoming PJSIP call legs that have not been answered yet send unnecessary "180 Ringing" or "183 Progress" messages every time a connected line update happens. If the outgoing channel is also PJSIP then the incoming channel will always send a "180 Ringing" or "183 Progress" message when the outgoing channel sends the INVITE. Consequences of these unnecessary messages: * The caller can start hearing ringback before the far end even gets the call. * Many phones tend to grab the first connected line information and refuse to update the display if it changes. The first information is not likely to be correct if the call goes to an endpoint not under the control of the first Asterisk box. When connected line first went into Asterisk in v1.8, chan_sip received an undocumented option "rpid_immediate" that defaults to disabled. When enabled, the option immediately passes connected line update information to the caller in "180 Ringing" or "183 Progress" messages as described above. * Added "rpid_immediate" option to prevent unnecessary "180 Ringing" or "183 Progress" messages. The default is "no" to disable sending the unnecessary messages. ASTERISK-24781 #close Reported by: Richard Mudgett Review: https://reviewboard.asterisk.org/r/4473/ ........ Merged revisions 433338 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433339 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	636d82f4d8	chan_pjsip/res_pjsip_callerid: Make Party ID handling simpler and consistent. ... The res_pjsip modules were manually checking both name and number presentation values when there is a function that determines the combined presentation for a party ID struct. The function takes into account if the name or number components are valid while the manual code rarely checked if the data was even valid. * Made use ast_party_id_presentation() rather than manually checking party ID presentation values. * Ensure that set_id_from_pai() and set_id_from_rpid() will not return presentation values other than what is pulled out of the SIP headers. It is best if the code doesn't assume that AST_PRES_ALLOWED and AST_PRES_USER_NUMBER_UNSCREENED are zero. * Fixed copy paste error in add_privacy_params() dealing with RPID privacy. * Pulled the id->number.valid test from add_privacy_header() and add_privacy_params() up into the parent function add_id_headers() to skip adding PAI/RPID headers earlier. * Made update_connected_line_information() not send out connected line updates if the connected line number is invalid. Lower level code would not add the party ID information and thus the sent message would be unnecessary. * Eliminated RAII_VAR usage in send_direct_media_request(). Review: https://reviewboard.asterisk.org/r/4472/ ........ Merged revisions 432892 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432893 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	a528dfc9a7	ARI/PJSIP: Apply requesting channel's format cap to created channels ... This patch addresses the following problems: * ari/resource_channels: In ARI, we currently create a format capability structure of SLIN and apply it to the new channel being created. This was originally done when the PBX core was used to create the channel, as there was a condition where a newly created channel could be created without any formats. Unfortunately, now that the Dial API is being used, this has two drawbacks: (a) SLIN, while it will ensure audio will flows, can cause a lot of needless transcodings to occur, particularly when a Local channel is created to the dialplan. When no format capabilities are available, the Dial API handles this better by handing all audio formats to the requsted channels. As such, we defer to that API to provide the format capabilities. (b) If a channel (requester) is causing this channel to be created, we currently don't use its format capabilities as we are passing in our own. However, the Dial API will use the requester channel's formats if none are passed into it, and the requester channel exists and has format capabilities. This is the "best" scenario, as it is the most likely to create a media path that minimizes transcoding. Fixing this simply entails removing the providing of the format capabilities structure to the Dial API. * chan_pjsip: Rather than blindly picking the first format in the format capability structure - which actually *can* be a video or text format - we select an audio format, and only pick the first format if that fails. That minimizes the weird scenario where we attempt to transcode between video/audio. * res_pjsip_sdp_rtp: Applied the joint capapbilites to the format structure. Since ast_request already limits us down to one format capability once the format capabilities are passed along, there's no reason to squelch it here. * channel: Fixed a comment. The reason we have to minimize our requested format capabilities down to a single format is due to Asterisk's inability to convey the format to be used back "up" a channel chain. Consider the following: PJSIP/A => L;1 <=> L;2 => PJSIP/B g,u,a g,u,a g,u,a u That is, we have PJSIP/A dialing a Local channel, where the Local;2 dials PJSIP/B. PJSIP/A has native format capabilities g722,ulaw,alaw; the Local channel has inherited those format capabilities down the line; PJSIP/B supports only ulaw. According to these format capabilities, ulaw is acceptable and should be selected across all the channels, and no transcoding should occur. However, there is no way to convey this: when L;2 and PJSIP/B are put into a bridge, we will select ulaw, but that is not conveyed to PJSIP/A and L;1. Thus, we end up with: PJSIP/A <=> L;1 <=> L;2 <=> PJSIP/B g g X u u Which causes g722 to be written to PJSIP/B. Even if we can convey the 'ulaw' choice back up the chain (which through some severe hacking in Local channels was accomplished), such that the chain looks like: PJSIP/A <=> L;1 <=> L;2 <=> PJSIP/B u u u u We have no way to tell PJSIP/A's *channel driver* to Answer in the SDP back with only 'ulaw'. This results in all the channel structures being set up correctly, but PJSIP/A *still* sending g722 and causing the chain to fall apart. There's a lot of difficulty just in setting this up, as there are numerous race conditions in the act of bridging, and no clean mechanism to pass the selected format backwards down an established channel chain. As such, the best that can be done at this point in time is clarifying the comment. Review: https://reviewboard.asterisk.org/r/4434/ ASTERISK-24812 #close Reported by: Matt Jordan ........ Merged revisions 432195 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432196 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	29f66b0429	ARI/PJSIP: Add the ability to redirect (transfer) a channel in a Stasis app ... This patch adds a new feature to ARI to redirect a channel to another server, and fixes a few bugs in PJSIP's handling of the Transfer dialplan application/ARI redirect capability. *New Feature* A new operation has been added to the ARI channels resource, redirect. With this, a channel in a Stasis application can be redirected to another endpoint of the same underlying channel technology. *Bug fixes* In the process of writing this new feature, two bugs were fixed in the PJSIP stack: (1) The existing .transfer channel callback had the limitation that it could only transfer channels to a SIP URI, i.e., you had to pass 'PJSIP/sip:foo@my_provider.com' to the dialplan application. While this is still supported, it is somewhat unintuitive - particularly in a world full of endpoints. As such, we now also support specifying the PJSIP endpoint to transfer to. (2) res_pjsip_multihomed was, unfortunately, trying to 'help' a 302 redirect by updating its Contact header. Alas, that resulted in the forwarding destination set by the dialplan application/ARI resource/whatever being rewritten with very incorrect information. Hence, we now don't bother updating an outgoing response if it is a 302. Since this took a looong time to find, some additional debug statements have been added to those modules that update the Contact headers. Review: https://reviewboard.asterisk.org/r/4316/ ASTERISK-24015 #close Reported by: Private Name ASTERISK-24703 #close Reported by: Matt Jordan ........ Merged revisions 431717 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431718 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	bd0bdf1e41	Fix some memory leaks. ... These memory leaks were found and fixed by John Hardin. I'm just committing them for him. ASTERISK-24736 #close Reported by Mark Michelson Review: https://reviewboard.asterisk.org/r/4389 ........ Merged revisions 431468 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431469 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	831acba826	Fix problem where a hung channel could occur on a failed blind transfer. ... Different clients react differently to being told that a blind transfer has failed. Some will simply send a BYE and be done with it. Others will attempt to reinvite themselves back onto the call. In the latter case, we were creating a new channel and then leaving it to sit forever doing nothing. With this code change, that new channel will not be created and the dialog with the transferring channel will be cleaned up properly. ASTERISK-24624 #close Reported by Zane Conkle Review: https://reviewboard.asterisk.org/r/4339 ........ Merged revisions 430714 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430715 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kevin Harwell	72499dc697	chan_pjsip: Race between channel answer and bridge setup when using direct media ... When direct media is enabled and a pjsip channel is answered a race would occur between the handling of the answer and bridge setup. Sometimes the media negotiation would take place after the native bridge was setup. This resulted in a NULL media address, which in turn resulted in Asterisk using its address as the remote media address when sending a reinvite. This patch makes the chan_pjsip answer handler synchronous thus alleviating the race condition (the bridge won't start setting things up until after it returns). ASTERISK-24563 #close Reported by: Steve Pitts Review: https://reviewboard.asterisk.org/r/4257/ ........ Merged revisions 429477 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429478 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	74d43977cf	res_pjsip_session: Delay sending BYE if a re-INVITE transaction is in progress. ... Given the scenario where a PJSIP channel is in a native RTP bridge with direct media and the channel is then hung up the code will currently re-INVITE the channel back to Asterisk and send a BYE at the same time. Many SIP implementations dislike this greatly. This change makes it so that if a re-INVITE transaction is in progress the BYE is queued to occur after the completion of the transaction (be it through normal means or a timeout). Review: https://reviewboard.asterisk.org/r/4248/ ........ Merged revisions 429409 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429410 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	d25eda5fb2	AST-2014-015: Fix race condition in chan_pjsip when sending responses after a CANCEL has been received. ... Due to the serialized architecture of chan_pjsip there exists a race condition where a CANCEL may be received and processed before responses (such as 180 Ringing, 183 Session Progress, and 200 OK) are sent. Since the session is in an unexpected state PJSIP will assert when this is attempted. This change makes it so that these responses are not sent on disconnected sessions. ASTERISK-24471 #close Reported by: yaron nahum ........ Merged revisions 428301 from http://svn.asterisk.org/svn/asterisk/branches/12 ........ Merged revisions 428302 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428303 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	656601d8c4	chan_pjsip: Remove AOR check when dialing and one is specified. ... The AOR value may contain the name of an AOR or a full SIP URI. Checking if the AOR exists can't be done as a result of this. ........ Merged revisions 428051 from http://svn.asterisk.org/svn/asterisk/branches/12 ........ Merged revisions 428052 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428053 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	ece61f5ed1	chan_pjsip: Add additional log message when an AOR is specified when dialing and it does not exist. ... ASTERISK-24499 #close Reported by: Rusty Newton ........ Merged revisions 428007 from http://svn.asterisk.org/svn/asterisk/branches/12 ........ Merged revisions 428008 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428009 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	49e63a191d	chan_motif / chan_pjsip: Fix incorrect "No such module" messages when reloading. ... For chan_motif the direct return value of the underlying config options framework was passed back. This can relay various states which the module loader would not interpet as success. It has been changed so only on errors will it report back an error. For chan_pjsip the code implemented a dummy reload function which always returned an error. This has been removed as all configuration is held within res_pjsip instead. ASTERISK-23651 #close Reported by: Rusty Newton ........ Merged revisions 427981 from http://svn.asterisk.org/svn/asterisk/branches/12 ........ Merged revisions 427982 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427983 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	ac091d4184	chan_pjsip: Add support for passing hold and unhold requests through. ... This change adds an option, moh_passthrough, that when enabled will pass hold and unhold requests through using a SIP re-invite. When placing on hold a re-invite with sendonly will be sent and when taking off hold a re-invite with sendrecv will be sent. This allows remote servers to handle the musiconhold instead of the local Asterisk instance being responsible. Review: https://reviewboard.asterisk.org/r/4103/ git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427112 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	86a4ce4957	PJSIP: Enforce module load dependencies ... This enforces that res_pjsip, res_pjsip_session, and res_pjsip_pubsub have loaded properly before attempting to load any modules that depend on them since the module loader system is not currently capable of resolving module dependencies on its own. ASTERISK-24312 #close Reported by: Dafi Ni Review: https://reviewboard.asterisk.org/r/4062/ ........ Merged revisions 425690 from http://svn.asterisk.org/svn/asterisk/branches/12 ........ Merged revisions 425691 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425700 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	0165c5f95a	chan_pjsip: Fix deadlock when masquerading PJSIP channels. ... Performing a directed call pickup resulted in a deadlock when PJSIP channels were involved. A masquerade needs to hold onto the channel locks while it swaps channel information between the two channels involved in the masquerade. With PJSIP channels, the fixup routine needed to push a fixup task onto the PJSIP channel's serializer. Unfortunately, if the serializer was also processing a task that needed to lock the channel, you get deadlock. * Added a new control frame that is used to notify the channels that a masquerade is about to start and when it has completed. * Added the ability to query taskprocessors if the current thread is the taskprocessor thread. * Added the ability to suspend/unsuspend the PJSIP serializer thread so a masquerade could fixup the PJSIP channel without using the serializer. ASTERISK-24356 #close Reported by: rmudgett Review: https://reviewboard.asterisk.org/r/4034/ ........ Merged revisions 424471 from http://svn.asterisk.org/svn/asterisk/branches/12 ........ Merged revisions 424472 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424473 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Jonathan Rose	2f570094b7	chan_pjsip: Fix an assertion for channels that lack formats on creation ... ASTERISK-24222 #close Reported by: Mark Michelson Review: https://reviewboard.asterisk.org/r/4017/ ........ Merged revisions 424333 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424358 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Joshua Colp	76744543b4	res_pjsip_session: Add additional checks for delaying session refreshes. ... There are certain situations which no checks existed for which need to prevent session refreshes. This includes sending a session refresh with SDP before SDP negotiation has completed and sending a session refresh before the dialog itself has been established. Checks for these have been added. Additionally COLP related UPDATEs were including SDP when it is not needed. Review: https://reviewboard.asterisk.org/r/4008/ ........ Merged revisions 424056 from http://svn.asterisk.org/svn/asterisk/branches/12 ........ Merged revisions 424057 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424058 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	ec0313c411	res_pjsip_sdp_rtp.c: Fix native formats containing formats that were not negotiated. ... Outgoing PJSIP calls can result in non-negotiated formats listed in the channel's native formats if video formats are listed in the endpoint's configuration. The resulting call could then use a non-negotiated format resulting in one way audio. * Simplified the update of session->req_caps in set_caps(). Why do something in five steps when only one is needed? AFS-162 #close Review: https://reviewboard.asterisk.org/r/4000/ ........ Merged revisions 423561 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423563 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	1b64f353f1	Resolve race condition where channels enter dialplan application before media has been negotiated. ... Testsuite tests will occasionally fail because on reception of a 200 OK SIP response, an AST_CONTROL_ANSWER frame is queued prior to when media has finished being negotiated. This is because session supplements are called into before PJSIP's inv_session code has told us that media has been updated. Sometimes the queued answer frame is handled by the PBX thread before the ensuing media negotiations occur, causing a test failure. As it turns out, there is another place that session supplements could be called into, which is after media has finished getting negotiated. What this commit introduces is a means for session supplements to indicate when they wish to be called into when handling an incoming SIP response. By default, all session supplements will be run at the same point that they were prior to this commit. However, session supplements may indicate that they wish to be handled earlier than normal on redirects, or they may indicate they wish to be handled after media has been negotiated. In this changeset, two session supplements have been updated to indicate a preference for when they should be run: res_pjsip_diversion executes before handling redirection in order to get information from the Diversion header, and chan_pjsip now handles responses to INVITEs after media negotiation to fix the race condition mentioned previously. ASTERISK-24212 #close Reported by Matt Jordan Review: https://reviewboard.asterisk.org/r/3930 ........ Merged revisions 422536 from http://svn.asterisk.org/svn/asterisk/branches/12 ........ Merged revisions 422542 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422543 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	b7f98c3da4	chan_pjsip: Update media translation paths when new SDP negotiated. ... On a SIP reinvite that changes media strams, the PJSIP channel driver was flooding the log with "Asked to transmit frame type %s, while native formats is %s" warnings. * Fixes PJSIP not setting up translation paths when the formats change on a reinvite. AFS-63 was effectively reintroduced because of the media formats work. res_pjsip_sdp_rtp.c:set_caps() * Improved the unexpected frame format WARNING message to include more information. * Added protective locking while altering formats on a channel. Reworked set_format() to simplify and protect the formats under manipulation. * Restored some code that got lost in the media_formats work. (channel.c:set_format() and res_pjsip_sdp_rtp.c:set_caps()) AFS-137 #close Reported by: Mark Michelson Review: https://reviewboard.asterisk.org/r/3906/ ........ Merged revisions 421645 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421646 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	d0640ad7df	Move evaluation of set_var options in pjsip to the end of channel initialization. ... This allows for set_var to override certain defaults such as caller ID and codec values. This also fixes a test suite regression. The "set_var" test suite test attempted to use set_var to override caller ID, but a recent change caused that to no longer work. ........ Merged revisions 421565 from http://svn.asterisk.org/svn/asterisk/branches/12 ........ Merged revisions 421566 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421567 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Richard Mudgett	83a9b91da9	chan_pjsip: Fix attended transfer connected line name update. ... A calls B B answers B SIP attended transfers to C C answers, B and C can see each other's connected line information B completes the transfer A has number but no name connected line information about C while C has the full information about A I examined the incoming and outgoing party id information handling of chan_pjsip and found several issues: * Fixed ast_sip_session_create_outgoing() not setting up the configured endpoint id as the new channel's caller id. This is why party A got default connected line information. * Made update_initial_connected_line() use the channel's CALLERID(id) information. The core, app_dial, or predial routine may have filled in or changed the endpoint caller id information. * Fixed chan_pjsip_new() not setting the full party id information available on the caller id and ANI party id. This includes the configured callerid_tag string and other party id fields. * Fixed accessing channel party id information without the channel lock held. * Fixed using the effective connected line id without doing a deep copy outside of holding the channel lock. Shallow copy string pointers can become stale if the channel lock is not held. * Made queue_connected_line_update() also update the channel's CALLERID(id) information. Moving the channel to another bridge would need the information there for the new bridge peer. * Fixed off nominal memory leak in update_incoming_connected_line(). * Added pjsip.conf callerid_tag string to party id information from enabled trust_inbound endpoint in caller_id_incoming_request(). AFS-98 #close Reported by: Mark Michelson Review: https://reviewboard.asterisk.org/r/3913/ ........ Merged revisions 421400 from http://svn.asterisk.org/svn/asterisk/branches/12 ........ Merged revisions 421403 from http://svn.asterisk.org/svn/asterisk/branches/13 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421404 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	bbeaeea1a3	res_hep_rtcp: Add module that sends RTCP information to a Homer Server ... This patch adds a new module to Asterisk, res_hep_rtcp. The module subscribes to the RTCP topics in Stasis and receives RTCP information back from the message bus. It encodes into HEPv3 packets and sends the information to the res_hep module for transmission. Using this, someone with a Homer server can get live call quality monitoring for all RTP-based channels in their Asterisk 12+ systems. In addition, there were a few bugs in the RTP engine, res_rtp_asterisk, and chan_pjsip that were uncovered by the tests written for the Asterisk Test Suite. This patch fixes the following: 1) chan_pjsip failed to set its channel unique ids on its RTP instance on outbound calls. It now does this in the appropriate location, in the serialized call callback. 2) The rtp_engine was overflowing some values when packed into JSON. Specifically, some longs and unsigned ints can't be be packed into integer values, for obvious reasons. Since libjansson only supports integers, floats, strings, booleans, and objects, we print these values into strings. 3) res_rtp_asterisk had a few problems: (a) it would emit a source IP address of 0.0.0.0 if bound to that IP address. We now use ast_find_ourip to get a better IP address, and properly marshal the result into an ast_strdupa'd string. (b) Reports can be generated with no report bodies. In particular, this occurs when a sender is transmitting information to a receiver (who will send no RTP back to the sender). As such, the sender has no report body for what it received. We now properly handle this case, and the sender will emit SR reports with no body. Likewise, if we receive an RTCP packet with no report body, we will still generate the appropriate events. ASTERISK-24119 #close ........ Merged revisions 419823 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419825 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Mark Michelson	dcf1ad14da	Add module support level to ast_module_info structure. Print it in CLI "module show" . ... ASTERISK-23919 #close Reported by Malcolm Davenport Review: https://reviewboard.asterisk.org/r/3802 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419592 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	f6283866c1	device state: Update the core to report ONHOLD if a channel is on hold ... In Asterisk, it is possible for a device to have a status of ONHOLD. This is not typically an easy thing to determine, as a channel being on hold is not a direct channel state. Typically, this has to be calculated outside of the core independently in channel drivers, notably, chan_sip and chan_pjsip. Both of these channel drivers already have to calculate device state in a fashion more complex than the core can handle, as they aggregate all state of all channels associated with a peer/endpoint; they also independently track whether or not one of those channels is currently on hold and mark the device state appropriately. In 12+, we now have the ability to report an AST_DEVICE_ONHOLD state for all channels that defer their device state to the core. This is due to channel hold state actually now being tracked on the channel itself. If a channel driver defers its device state to the core (which many, such as DAHDI, IAX2, and others do in most situations), the device state core already goes out to get a channel associated with the device. As such, it can now also factor the channel hold state in its calculation. This patch adds this logic to the device state core. It also uses an existing mapping between device state and channel state to handle more channel states. chan_pjsip has been updated slightly as well to make use of this (as it was, for some reason, reporting a channel state of BUSY as a device state of INUSE, which feels slightly wrong). Review: https://reviewboard.asterisk.org/r/3771/ ASTERISK-24038 #close git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419358 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	bb87796f67	ARI: Fix endpoint/channel subscription issues; allow for subscriptions to tech ... This patch serves two purposes: (1) It fixes some bugs with endpoint subscriptions not reporting all of the channel events (2) It serves as the preliminary work needed for ASTERISK-23692, which allows for sending/receiving arbitrary out of call text messages through ARI in a technology agnostic fashion. The messaging functionality described on ASTERISK-23692 requires two things: (1) The ability to send/receive messages associated with an endpoint. This is relatively straight forwards with the endpoint core in Asterisk now. (2) The ability to send/receive messages associated with a technology and an arbitrary technology defined URI. This is less straight forward, as endpoints are formed from a tech + resource pair. We don't have a mechanism to note that a technology that *may* have endpoints exists. This patch provides such a mechanism, and fixes a few bugs along the way. The first major bug this patch fixes is the forwarding of channel messages to their respective endpoints. Prior to this patch, there were two problems: (1) Channel caching messages weren't forwarded. Thus, the endpoints missed most of the interesting bits (such as channel creation, destruction, state changes, etc.) (2) Channels weren't associated with their endpoint until after creation. This resulted in endpoints missing the channel creation message, which limited the usefulness of the subscription in the first place (a major use case being 'tell me when this endpoint has a channel'). Unfortunately, this meant another parameter to ast_channel_alloc. Since not all channel technologies support an ast_endpoint, this patch makes such a call optional and opts for a new function, ast_channel_alloc_with_endpoint. When endpoints are created, they will implicitly create a technology endpoint for their technology (if one does not already exist). A technology endpoint is special in that it has no state, cannot have channels created for it, cannot be created explicitly, and cannot be destroyed except on shutdown. It does, however, have all messages from other endpoints in its technology forwarded to it. Combined with the bug fixes, we now have Stasis messages being properly forwarded. Consider the following scenario: two PJSIP endpoints (foo and bar), where bar has a single channel associated with it and foo has two channels associated with it. The messages would be forwarded as follows: channel PJSIP/foo-1 -- \ --> endpoint PJSIP/foo -- / \ channel PJSIP/foo-2 -- \ ---- > endpoint PJSIP / channel PJSIP/bar-1 -----> endpoint PJSIP/bar -- ARI, through the applications resource, can: - subscribe to endpoint:PJSIP/foo and get notifications for channels PJSIP/foo-1,PJSIP/foo-2 and endpoint PJSIP/foo - subscribe to endpoint:PJSIP/bar and get notifications for channels PJSIP/bar-1 and endpoint PJSIP/bar - subscribe to endpoint:PJSIP and get notifications for channels PJSIP/foo-1,PJSIP/foo-2,PJSIP/bar-1 and endpoints PJSIP/foo,PJSIP/bar Note that since endpoint PJSIP never changes, it never has events itself. It merely provides an aggregation point for all other endpoints in its technology (which in turn aggregate all channel messages associated with that endpoint). This patch also adds endpoints to res_xmpp and chan_motif, because the actual messaging work will need it (messaging without XMPP is just sad). Review: https://reviewboard.asterisk.org/r/3760/ ASTERISK-23692 ........ Merged revisions 419196 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419203 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	a2c912e997	media formats: re-architect handling of media for performance improvements ... In the old times media formats were represented using a bit field. This was fast but had a few limitations. 1. Asterisk was limited in how many formats it could handle. 2. Formats, being a bit field, could not include any attribute information. A format was strictly its type, e.g., "this is ulaw". This was changed in Asterisk 10 (see https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal for notes on that work) which led to the creation of the ast_format structure. This structure allowed Asterisk to handle attributes and bundle information with a format. Additionally, ast_format_cap was created to act as a container for multiple formats that, together, formed the capability of some entity. Another mechanism was added to allow logic to be registered which performed format attribute negotiation. Everywhere throughout the codebase Asterisk was changed to use this strategy. Unfortunately, in software, there is no free lunch. These new capabilities came at a cost. Performance analysis and profiling showed that we spend an inordinate amount of time comparing, copying, and generally manipulating formats and their related structures. Basic prototyping has shown that a reasonably large performance improvement could be made in this area. This patch is the result of that project, which overhauled the media format architecture and its usage in Asterisk to improve performance. Generally, the new philosophy for handling formats is as follows: * The ast_format structure is reference counted. This removed a large amount of the memory allocations and copying that was done in prior versions. * In order to prevent race conditions while keeping things performant, the ast_format structure is immutable by convention and lock-free. Violate this tenet at your peril! * Because formats are reference counted, codecs are also reference counted. The Asterisk core generally provides built-in codecs and caches the ast_format structures created to represent them. Generally, to prevent inordinate amounts of module reference bumping, codecs and formats can be added at run-time but cannot be removed. * All compatibility with the bit field representation of codecs/formats has been moved to a compatibility API. The primary user of this representation is chan_iax2, which must continue to maintain its bit-field usage of formats for interoperability concerns. * When a format is negotiated with attributes, or when a format cannot be represented by one of the cached formats, a new format object is created or cloned from an existing format. That format may have the same codec underlying it, but is a different format than a version of the format with different attributes or without attributes. * While formats are reference counted objects, the reference count maintained on the format should be manipulated with care. Formats are generally cached and will persist for the lifetime of Asterisk and do not explicitly need to have their lifetime modified. An exception to this is when the user of a format does not know where the format came from *and* the user may outlive the provider of the format. This occurs, for example, when a format is read from a channel: the channel may have a format with attributes (hence, non-cached) and the user of the format may last longer than the channel (if the reference to the channel is released prior to the format's reference). For more information on this work, see the API design notes: https://wiki.asterisk.org/wiki/display/AST/Media+Format+Rewrite Finally, this work was the culmination of a large number of developer's efforts. Extra thanks goes to Corey Farrell, who took on a large amount of the work in the Asterisk core, chan_sip, and was an invaluable resource in peer reviews throughout this project. There were a substantial number of patches contributed during this work; the following issues/patch names simply reflect some of the work (and will cause the release scripts to give attribution to the individuals who work on them). Reviews: https://reviewboard.asterisk.org/r/3814 https://reviewboard.asterisk.org/r/3808 https://reviewboard.asterisk.org/r/3805 https://reviewboard.asterisk.org/r/3803 https://reviewboard.asterisk.org/r/3801 https://reviewboard.asterisk.org/r/3798 https://reviewboard.asterisk.org/r/3800 https://reviewboard.asterisk.org/r/3794 https://reviewboard.asterisk.org/r/3793 https://reviewboard.asterisk.org/r/3792 https://reviewboard.asterisk.org/r/3791 https://reviewboard.asterisk.org/r/3790 https://reviewboard.asterisk.org/r/3789 https://reviewboard.asterisk.org/r/3788 https://reviewboard.asterisk.org/r/3787 https://reviewboard.asterisk.org/r/3786 https://reviewboard.asterisk.org/r/3784 https://reviewboard.asterisk.org/r/3783 https://reviewboard.asterisk.org/r/3778 https://reviewboard.asterisk.org/r/3774 https://reviewboard.asterisk.org/r/3775 https://reviewboard.asterisk.org/r/3772 https://reviewboard.asterisk.org/r/3761 https://reviewboard.asterisk.org/r/3754 https://reviewboard.asterisk.org/r/3753 https://reviewboard.asterisk.org/r/3751 https://reviewboard.asterisk.org/r/3750 https://reviewboard.asterisk.org/r/3748 https://reviewboard.asterisk.org/r/3747 https://reviewboard.asterisk.org/r/3746 https://reviewboard.asterisk.org/r/3742 https://reviewboard.asterisk.org/r/3740 https://reviewboard.asterisk.org/r/3739 https://reviewboard.asterisk.org/r/3738 https://reviewboard.asterisk.org/r/3737 https://reviewboard.asterisk.org/r/3736 https://reviewboard.asterisk.org/r/3734 https://reviewboard.asterisk.org/r/3722 https://reviewboard.asterisk.org/r/3713 https://reviewboard.asterisk.org/r/3703 https://reviewboard.asterisk.org/r/3689 https://reviewboard.asterisk.org/r/3687 https://reviewboard.asterisk.org/r/3674 https://reviewboard.asterisk.org/r/3671 https://reviewboard.asterisk.org/r/3667 https://reviewboard.asterisk.org/r/3665 https://reviewboard.asterisk.org/r/3625 https://reviewboard.asterisk.org/r/3602 https://reviewboard.asterisk.org/r/3519 https://reviewboard.asterisk.org/r/3518 https://reviewboard.asterisk.org/r/3516 https://reviewboard.asterisk.org/r/3515 https://reviewboard.asterisk.org/r/3512 https://reviewboard.asterisk.org/r/3506 https://reviewboard.asterisk.org/r/3413 https://reviewboard.asterisk.org/r/3410 https://reviewboard.asterisk.org/r/3387 https://reviewboard.asterisk.org/r/3388 https://reviewboard.asterisk.org/r/3389 https://reviewboard.asterisk.org/r/3390 https://reviewboard.asterisk.org/r/3321 https://reviewboard.asterisk.org/r/3320 https://reviewboard.asterisk.org/r/3319 https://reviewboard.asterisk.org/r/3318 https://reviewboard.asterisk.org/r/3266 https://reviewboard.asterisk.org/r/3265 https://reviewboard.asterisk.org/r/3234 https://reviewboard.asterisk.org/r/3178 ASTERISK-23114 #close Reported by: mjordan media_formats_translation_core.diff uploaded by kharwell (License 6464) rb3506.diff uploaded by mjordan (License 6283) media_format_app_file.diff uploaded by kharwell (License 6464) misc-2.diff uploaded by file (License 5000) chan_mild-3.diff uploaded by file (License 5000) chan_obscure.diff uploaded by file (License 5000) jingle.diff uploaded by file (License 5000) funcs.diff uploaded by file (License 5000) formats.diff uploaded by file (License 5000) core.diff uploaded by file (License 5000) bridges.diff uploaded by file (License 5000) mf-codecs-2.diff uploaded by file (License 5000) mf-app_fax.diff uploaded by file (License 5000) mf-apps-3.diff uploaded by file (License 5000) media-formats-3.diff uploaded by file (License 5000) ASTERISK-23715 rb3713.patch uploaded by coreyfarrell (License 5909) rb3689.patch uploaded by mjordan (License 6283) ASTERISK-23957 rb3722.patch uploaded by mjordan (License 6283) mf-attributes-3.diff uploaded by file (License 5000) ASTERISK-23958 Tested by: jrose rb3822.patch uploaded by coreyfarrell (License 5909) rb3800.patch uploaded by jrose (License 6182) chan_sip.diff uploaded by mjordan (License 6283) rb3747.patch uploaded by jrose (License 6182) ASTERISK-23959 #close Tested by: sgriepentrog, mjordan, coreyfarrell sip_cleanup.diff uploaded by opticron (License 6273) chan_sip_caps.diff uploaded by mjordan (License 6283) rb3751.patch uploaded by coreyfarrell (License 5909) chan_sip-3.diff uploaded by file (License 5000) ASTERISK-23960 #close Tested by: opticron direct_media.diff uploaded by opticron (License 6273) pjsip-direct-media.diff uploaded by file (License 5000) format_cap_remove.diff uploaded by opticron (License 6273) media_format_fixes.diff uploaded by opticron (License 6273) chan_pjsip-2.diff uploaded by file (License 5000) ASTERISK-23966 #close Tested by: rmudgett rb3803.patch uploaded by rmudgetti (License 5621) chan_dahdi.diff uploaded by file (License 5000) ASTERISK-24064 #close Tested by: coreyfarrell, mjordan, opticron, file, rmudgett, sgriepentrog, jrose rb3814.patch uploaded by rmudgett (License 5621) moh_cleanup.diff uploaded by opticron (License 6273) bridge_leak.diff uploaded by opticron (License 6273) translate.diff uploaded by file (License 5000) rb3795.patch uploaded by rmudgett (License 5621) tls_fix.diff uploaded by mjordan (License 6283) fax-mf-fix-2.diff uploaded by file (License 5000) rtp_transfer_stuff uploaded by mjordan (License 6283) rb3787.patch uploaded by rmudgett (License 5621) media-formats-explicit-translate-format-3.diff uploaded by file (License 5000) format_cache_case_fix.diff uploaded by opticron (License 6273) rb3774.patch uploaded by rmudgett (License 5621) rb3775.patch uploaded by rmudgett (License 5621) rtp_engine_fix.diff uploaded by opticron (License 6273) rtp_crash_fix.diff uploaded by opticron (License 6273) rb3753.patch uploaded by mjordan (License 6283) rb3750.patch uploaded by mjordan (License 6283) rb3748.patch uploaded by rmudgett (License 5621) media_format_fixes.diff uploaded by opticron (License 6273) rb3740.patch uploaded by mjordan (License 6283) rb3739.patch uploaded by mjordan (License 6283) rb3734.patch uploaded by mjordan (License 6283) rb3689.patch uploaded by mjordan (License 6283) rb3674.patch uploaded by coreyfarrell (License 5909) rb3671.patch uploaded by coreyfarrell (License 5909) rb3667.patch uploaded by coreyfarrell (License 5909) rb3665.patch uploaded by mjordan (License 6283) rb3625.patch uploaded by coreyfarrell (License 5909) rb3602.patch uploaded by coreyfarrell (License 5909) format_compatibility-2.diff uploaded by file (License 5000) core.diff uploaded by file (License 5000) git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419044 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	fd94fea599	res_pjsip: Support setting a default accountcode on endpoints ... Most channel drivers let you specify a default accountcode to be set on channels associated with a particular peer/endpoint/object. Prior to this patch, chan_pjsip/res_pjsip did not support such a setting. This patch adds a new setting to the res_pjsip endpoint object, 'accountcode'. When a channel is created that is associated with an endpoint with this value set, the channel will automatically have its accountcode property set to the value configured for the endpoint. Review: https://reviewboard.asterisk.org/r/3724/ ASTERISK-24000 #close Reported by: Matt Jordan ........ Merged revisions 418756 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418757 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	edcaa54019	CEL: Fix incorrect/missing extra field information ... This corrects two issues with the extra field information in Asterisk 12+ in channel event logs. It is possible to inject custom values into the dialstatus provided by ast_channel_dial_type() Stasis messages that fall outside the enumeration allowed for the DIALSTATUS channel variable. CEL now filters for the allowed values and ignores other values. The "hangupsource" extra field key is always blank if the far end channel is a chan_pjsip channel. This is because the hangupsource is never set for the pjsip channel driver. This change sets the hangupsource whenever a hangup is queued for chan_pjsip channels. This corrects an issue with the pjsip channel driver where the hangupcause information was not being set properly. Review: https://reviewboard.asterisk.org/r/3690/ ........ Merged revisions 418071 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418084 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Matthew Jordan	299e255aa9	chan_pjsip: Add a test event for fast picture updates ... This will drive the test on review r3419. Note that the patch for this was done by Ben Ford, although it was slightly modified for this commit. ASTERISK-23562 Reported by: Matt Jordan ........ Merged revisions 417399 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417400 65c4cc65-6c06-0410-ace0-fbb531ad65f3	11 years ago
Kinsey Moore	6fd8940d4c	PJSIP: Send initial connected line information ... This makes chan_pjsip send connected line information when it is called so that connected line information is available on the connected channel. (closes issue DPMA-442) Reported by: John Bigelow Review: https://reviewboard.asterisk.org/r/3584/ ........ Merged revisions 415191 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415192 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	6b423e311b	chan_pjsip: Add debug in RTP Engine glue callback ... This patch adds some debug statements that aid with determining why a direct media request may or may not be initiated. ........ Merged revisions 415117 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415118 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	abd3e4040b	Allow Asterisk to compile under GCC 4.10 ... This resolves a large number of compiler warnings from GCC 4.10 which cause the build to fail under dev mode. The vast majority are signed/unsigned mismatches in printf-style format strings. ........ Merged revisions 413586 from http://svn.asterisk.org/svn/asterisk/branches/1.8 ........ Merged revisions 413587 from http://svn.asterisk.org/svn/asterisk/branches/11 ........ Merged revisions 413588 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413589 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	f2a060f502	chan_pjsip: Fix deadlock when retrieving call-id of channel. ... If a task was in-flight which required the channel or bridge lock it was possible for the synchronous task retrieving the call-id to deadlock as it holds those locks. After discussing with Mark Michelson the synchronous task was removed and the call-id accessed directly. This should be safe as each object involved is guaranteed to exist and the call-id will never change. ........ Merged revisions 413140 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413141 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	56ca10c7f1	chan_pjsip: Add support for picking up calls in the configured pickup group. ... AST-1363 Review: https://reviewboard.asterisk.org/r/3478/ ........ Merged revisions 413117 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413118 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	2e39da35d0	chan_pjsip: Implement core ability to get Call-ID of a channel. ... This changes implement the "get_pvt_uniqueid" which is used to return the technology specific unique identifier. In the case of SIP this is the Call-ID of the dialog. Review: https://reviewboard.asterisk.org/r/3480/ ........ Merged revisions 413088 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413089 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Scott Griepentrog	80ef9a21b9	uniqueid: channel linkedid, ami, ari object creation with id's ... Much needed was a way to assign id to objects on creation, and much change was necessary to accomplish it. Channel uniqueids and linkedids are split into separate string and creation time components without breaking linkedid propgation. This allowed the uniqueid to be specified by the user interface - and those values are now carried through to channel creation, adding the assignedids value to every function in the chain including the channel drivers. For local channels, the second channel can be specified or left to default to a ;2 suffix of first. In ARI, bridge, playback, and snoop objects can also be created with a specified uniqueid. Along the way, the args order to allocating channels was fixed in chan_mgcp and chan_gtalk, and linkedid is no longer lost as masquerade occurs. (closes issue ASTERISK-23120) Review: https://reviewboard.asterisk.org/r/3191/ ........ Merged revisions 410157 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410158 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Scott Griepentrog	5a46d69543	pjsip: avoid edge case potential crash in answer() ... When accidentally compiling against a wrong version of pjsip headers with a different pjsip_inv_session size, the invite_tsx structure could be null in the answer() function. This led to a crash because it attempted to send the session response with an uninitialized packet pointer. This patch presets packet to null and adds a diagnostic log message to explain why the call fails. Review: https://reviewboard.asterisk.org/r/3267/ ........ Merged revisions 408970 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408971 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	85fbbed45d	chan_pjsip: Provide a means for tracking device state when holding/unholding ... Previously PJSIP did not track hold/unhold and it would always simply be 'inuse'. This patch fixes that. review: https://reviewboard.asterisk.org/r/3129/ ........ Merged revisions 405908 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405910 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	3373a5332b	chan_pjsip: initial device state on endpoints is INVALID ... When endpoints get loaded their device state gets set to 'INVALID' because the channel driver has not been loaded yet. Fixed by updating the device state for every endpoint upon load of the channel driver. (closes issue ASTERISK-23065) Reported by: Rusty Newton Review: https://reviewboard.asterisk.org/r/3123/ ........ Merged revisions 405643 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405644 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kinsey Moore	7cbb6eab15	PJSIP: Add Path header support ... This adds Path support to chan_pjsip in res_pjsip_path.c with minimal additions in res_pjsip_registrar.c to store the path and additions in res_pjsip_outbound_registration.c to enable advertisement of path support to registrars and intervening proxies. Path information is stored on contacts and is enabled via Address of Record (AoRs) and Registration configuration sections. While adding path support, it became necessary to be able to add SIP supplements that handled messages outside of sessions, so a framework for handling these types of hooks was added in parallel to the already-existing session supplements and several senders of out-of-dialog requests were refactored as a result. (closes issue ASTERISK-21084) Review: https://reviewboard.asterisk.org/r/3050/ ........ Merged revisions 405565 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405566 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	821ab51381	res_pjsip: add 'set_var' support on endpoints ... Added a new 'set_var' option for ast_sip_endpoint(s). For each variable specified that variable gets set upon creation of a pjsip channel involving the endpoint. (closes issue ASTERISK-22868) Reported by: Joshua Colp Review: https://reviewboard.asterisk.org/r/3095/ ........ Merged revisions 404663 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404664 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	f720a9ac89	chan_pjsip: Handle hanging up before calling. ... Channel creation in Asterisk is broken up into two steps: requesting and calling. In some cases a channel may be requested but never called. This happens in the ChanIsAvail dialplan application for determining if something is reachable or not. The PJSIP channel driver did not take this situation into account and attempted to end a session that was never called out on. The code now checks the session state to determine if the session has been called out on and if not terminates it instead of ending it. (closes issue ASTERISK-23074) Reported by: Kilburn ........ Merged revisions 404652 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404653 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	28c0cb28d0	channel locking: Add locking for channel snapshot creation ... Original commit message by mmichelson (asterisk 12 r403311): "This adds channel locks around calls to create channel snapshots as well as other functions which operate on a channel and then end up creating a channel snapshot. Functions that expect the channel to be locked prior to being called have had their documentation updated to indicate such." The above was initially committed and then reverted at r403398. The problem was found to be in core_local.c in the publish_local_bridge_message function. The ast_unreal_lock_all function locks and adds a reference to the returned channels and while they were being unlocked they were not being unreffed when no longer needed. Fixed by unreffing the channels. Also in bridge.c a lock was obtained on "other->chan", but then an attempt was made to unlock "other" and not the previously locked channel. Fixed by unlocking "other->chan" (closes issue ASTERISK-22709) Reported by: John Bigelow ........ Merged revisions 404237 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404260 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Joshua Colp	e2630fcd51	channels: Return allocated channels locked. ... This change makes ast_channel_alloc return allocated channels locked. By doing so no other thread can acquire, lock, and manipulate the channel before it is completely set up. (closes issue AST-1256) Review: https://reviewboard.asterisk.org/r/3067/ ........ Merged revisions 404204 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404210 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Kevin Harwell	84e1790beb	bridge_native_rtp: Deadlock during 4-way conference creation ... The change contains a slightly adjusted patch that was on the issue (submitted by kmoore). A fix was made by adding in a bridge lock while calling bridge_start/stop from the framehook callback. Since the framehook callback is not called from the bridging core the bridge is not locked, but needs to be before calling bridge_start. (closes issue ASTERISK-22749) Reported by: Kinsey Moore Review: https://reviewboard.asterisk.org/r/3066/ Patches: lock_inversion.diff uploaded by kmoore (license 6273) ........ Merged revisions 403767 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403768 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	5583d2c629	chan_pjsip: Revert r403587 ... This patch was intended to eliminate a deadlock that occurs when masquerades occur in pjsip channels, but has some potential side effects. Mark Michelson is currently working on addressing this problem from another angle. (issue ASTERISK-22936) Reported by: Jonathan Rose ........ Merged revisions 403705 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403707 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Matthew Jordan	ce423d2ea4	func_channel, chan_pjsip: Add CHANNEL read function support for chan_pjsip ... This patch adds CHANNEL read support for chan_pjsip. This allows the dialplan to use the CHANNEL function on a chan_pjsip channel to obtain run-time information about the channel from the PJSIP channel driver and the PJSIP stack. This includes: * RTP information, including source/destination media addresses, whether or not the media is secure, held, and other properties. * RTCP information. This includes sets of parseable information, as well as individual statistic attriutes. * PJSIP information. This includes URIs, local/remote signalling addresses, whether or not the signalling is secure, and other properties. * The endpoint name. This can be used in conjunction with the PJSIP_ENDPOINT function to obtain more detailed endpoint information. Review: https://reviewboard.asterisk.org/r/3038/ ........ Merged revisions 403618 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403619 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Jonathan Rose	905a7de52b	chan_pjsip: Fix a sticking channel lock caused by channel masquerades ... (closes issue ASTERISK-22936) Reported by: Jonathan Rose Review: https://reviewboard.asterisk.org/r/3042/ ........ Merged revisions 403587 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403588 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
David M. Lee	1212906351	Reverting r403311. It's causing ARI tests to hang. ... ........ Merged revisions 403398 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403404 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago
Mark Michelson	8e8b329e14	Add channel locking for channel snapshot creation. ... This adds channel locks around calls to create channel snapshots as well as other functions which operate on a channel and then end up creating a channel snapshot. Functions that expect the channel to be locked prior to being called have had their documentation updated to indicate such. ........ Merged revisions 403311 from http://svn.asterisk.org/svn/asterisk/branches/12 git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403314 65c4cc65-6c06-0410-ace0-fbb531ad65f3	12 years ago