Dump the res_pjsip endpt internals.
In non-developer mode we will not document or make easily accessible the
"details" option even though it is still available. The user has to know
it exists to use it. Presumably they would also be aware of the potential
crash warning below.
Warning: PJPROJECT documents that the function used by this CLI command
may cause a crash when asking for details because it tries to access all
active memory pools.
Change-Id: If2d98a3641c9873364d1daaad971376311aef3cb
res_pjsip_log_forwarder has been renamed to res_pjproject
and enhanced as follows:
As a follow-on to the recent 'Add CLI "pjsip show buildopts"' patch,
a new ast_pjproject_get_buildopt function has been added. It
allows the caller to get the value of one of the buildopts.
The initial use case is retrieving the runtime value of
PJ_MAX_HOSTNAME to insure we don't send a hostname greater
than pjproject can handle. Since it can differ between
the version of pjproject that Asterisk was compiled against
and the version of pjproject that Asterisk is running against,
we can't use the PJ_MAX_HOSTNAME macro directly in Asterisk
source code.
Change-Id: Iab6e82fec3d7cf00c1cf6185c42be3e7569dee1e
The xferfailsound was read from the channel at the beginning of the transfer,
and that value is "cached" for the duration of the transfer. Therefore, changing
the xferfailsound on the channel using the FEATURE() dialplan function does
nothing once the transfer is under way.
This makes it so the transfer code instead gets the xferfailsound configuration
options from the channel when it is actually going to be used.
This patch also fixes a potential memory leak of the props object as well as
making sure the condition variable gets initialized before being destroyed.
ASTERISK-25696 #close
Change-Id: Ic726b0f54ef588bd9c9c67f4b0e4d787934f85e4
* changes:
Sorcery: Create human friendly serializer names.
Stasis: Create human friendly taskprocessor/serializer names.
taskprocessor.c: New API for human friendly taskprocessor names.
taskprocessor.c: Sort CLI "core show taskprocessors" output.
On a system with multiple ip addresses in the same subnet, if a
transport is bound to a specific ip address and endpoint/media_address
is set, the SIP/SDP will have the correct address in all fields but
the rtp stream MAY still originate from one of the other ip addresses,
most probably the "primary" ip address. This happens because
res_pjsip_sdp_rtp/create_rtp always calls ast_instance_new with
the "all" ip address (0.0.0.0 or ::).
The new option causes res_pjsip_sdp_rtp/create_rtp to call
ast_rtp_instance_new with the endpoint's media_address (if specified)
instead of the "all" address. This causes the packets to originate from
the specified address.
ASTERISK-25632
ASTERISK-25637
Reported-by: Olivier Krief
Reported-by: Dan Journo
Change-Id: I3dfaa079e54ba7fb7c4fd1f5f7bd9509bbf8bd88
Added new global option (regcontext) to pjsip. When set, Asterisk will
dynamically create and destroy a NoOp priority 1 extension
for a given endpoint who registers or unregisters with us.
ASTERISK-25670 #close
Reported-by: Daniel Journo
Change-Id: Ib1530c5b45340625805c057f8ff1fb240a43ea62
* Add new API call to get a sequence number for use in human friendly
taskprocessor names.
* Add new API call to create a taskprocessor name in a given buffer and
append a sequence number.
Change-Id: Iac458f05b45232315ed64aa31b1df05b875537a9
Renamed global declaration:tv to dummy_tv_var_for_types,
which would oltherwise cause 'shadow' warnings when 'tv'
was declared as a local variable elsewhere.
Added comment to note that dummy_tv_var_for_types is never
really exported and only used as a place holder.
ASTERISK-25627 #close
Change-Id: I9a6e17995006584f3627efe8988e3f8aa0f5dc28
The 11/13 branches and master use 2 different file version macros. 11/13
uses ASTERISK_FILE_VERSION but master uses ASTERISK_REGISTER_FILE. This
means a new file added to 11/13 can't just be cherry-picked to master
because the macro has to be changed.
To make cherry-picking possible, ASTERISK_REGISTER_FILE was added
to asterisk.h as a simple alias for ASTERISK_FILE_VERSION(__FILE__, NULL)
The "$Revision$" tag doesn't do anything since Asterisk moved to git so
just passing NULL as the verison works fine. asterisk.h was also
annotated to deprecate ASTERISK_FILE_VERSION and suggest using
ASTERISK_REGISTER_FILE for all new files.
Finally, 2 recent file additions, pbx_builtins.c and pbx_functions.c,
were modified to use the new macro to make sure it actually worked.
'core show file version' showed the correct output.
Change-Id: I5867ed898818d26ee49bb6e5c7d4c1a45d4789a5
Somehow stasis_cache_pattern got out of sync between 13 and master
and it was causing duplicate channel message issues in 13 when
related to a specific endpoint. I.E. from statsd,
'endpoints.PJSIP.1174.channels 0|g' was being emitted twice.
Backporting stasis_cache_pattern from master to 13 solved
the issue and running the unit and testsuite tests confirmed
that no new ones were created.
ASTERISK-25317 #close
Change-Id: Ia8707462f62d15eed14541c37f332a7bbbceb548
This is the sixth patch in a series meant to reduce the bulk of pbx.c.
This moves hangup handler management functions to their own source.
Change-Id: Ib25a75aa57fc7d5c4294479e5cc46775912fb104
This is the sixth patch in a series meant to reduce the bulk of pbx.c.
This moves dialplan application management functions to their own source.
Change-Id: I444c10fb90a3cdf9f3047605d6a8aad49c22c44c
This is the fifth patch in a series meant to reduce the bulk of pbx.c.
This moves ast_switch functions to their own source.
Change-Id: Ic2592a18a5c4d8a3c2dcf9786c9a6f650a8c628e
The menuselect conflict between app_voicemail and res_mwi_external
makes it hard to package 1 version of Asterisk. There no actual
build dependencies between the 2 so moving this check to runtime
seems like a better solution.
The ast_vm_register and ast_vm_greeter_register functions in app.c
were modified to return AST_MODULE_LOAD_DECLINE instead of -1 if there
is already a voicemail module registered. The modules' load_module
functions were then modified to return DECLINE instead of -1 to the
loader. Since -1 is interpreted by the loader as AST_MODULE_LOAD_FAILURE,
the modules were incorrectly causing Asterisk to stop so this needed
to be cleaned up anyway.
Now you can build both and use modules.conf to decide which voicemail
implementation to load.
The default menuselect options still build app_voicemail and not
res_mwi_external but if both ARE built, res_mwi_external will load
first and become the voicemail provider unless modules.conf rules
prevent it. This is noted in CHANGES.
Change-Id: I7d98d4e8a3b87b8df9e51c2608f0da6ddfb89247
This is the third patch in a series meant to reduce the bulk of pbx.c.
This moves channel and global variable routines to their own source.
Change-Id: Ibe8fb4647db11598591d443a99e3f99200a56bc6
This is the second patch in a series meant to reduce the bulk of pbx.c.
This moves custom function management routines to their own source.
Change-Id: I34a6190282f781cdbbd3ce9d3adeac3c3805e177
We joked about splitting pbx.c into multiple files but this first step was
fairly easy. All of the pbx_builtin dialplan applications have been moved
into pbx_builtins.c and a new pbx_private.h file was added. load_pbx_builtins()
is called by asterisk.c just after load_pbx().
A few functions were renamed and are cross-exposed between the 2 source files.
Change-Id: I87066be3dbf7f5822942ac1449d98cc43fc7561a
When an endpoint is created, its messages are forwarded to both the tech
endpoint topic and the all endpoints topic. This is done so that various
parties interested in endpoint messages can subscribe to just the tech
endpoint and receive all messages associated with that particular technology,
as opposed to subscribing to the all endpoints topic. Unfortunately, when the
tech endpoint is created, it also forwards all of its messages to the all
topic. This results in duplicate messages whenever an endpoint publishes its
messages.
This patch resolves the duplicate message issue by creating a new function
for Stasis caching topics, stasis_cp_sink_create. In most respects, this acts
as a normal caching topic, save that it no longer forwards messages it receives
to the all endpoints topic. This allows it to act as an aggregation "sink",
while preserving the necessary caching behaviour.
ASTERISK-25137 #close
Reported-by: Vitezslav Novy
ASTERISK-25116 #close
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
Change-Id: Ie47784adfb973ab0063e59fc18f390d7dd26d17b
Updated ast_websocket_write to encode the entire frame in to one
write operation, to ensure that we don't end up with a situation
where the websocket header has been sent, while the body can not
be written.
Previous to August's patch in commit b9bd3c14, certain network
conditions could cause the header to be written, and then the
sub-sequent body to fail - which would cause the next successful
write to contain a new header, and a new body (resulting in
the peer receiving two headers - the second of which would be
read as part of the body for the first header).
This was patched to have both write operations individually fail
by closing the websocket.
In a case available to the submitter of this patch, the same
body which would consistently fail to write, would succeed
if written at the same time as the header.
This update merges the two operations in to one, adds debug messages
indicating the reason for a websocket connection being closed during
a write operation, and clarifies some variable names for code legibility.
Change-Id: I4db7a586af1c7a57184c31d3d55bf146f1a40598
pjproject < 2.5.0 will segfault on a tls transport if async_operations
is greater than 1. A runtime version check has been added to throw
an error if the version is < 2.5.0 and async_operations > 1.
To assist in the check, a new api "ast_compare_versions" was added
to utils which compares 2 major.minor.patch.extra version strings.
ASTERISK-25615 #close
Change-Id: I8e88bb49cbcfbca88d9de705496d6f6a8c938a98
Reported-by: George Joseph
Tested-by: George Joseph
Both transport and endpoint now check for the existence and readability
of tls certificate and key files before passing them on to pjproject.
This will cause the object to not load rather than waiting for pjproject
to discover that there's a problem when a session is attempted.
NOTE: chan_sip also uses ast_rtp_dtls_cfg_parse but it's located
in build_peer which is gigantic and I didn't want to disturb it.
Error messages will emit but it won't interrupt chan_sip loading.
ASTERISK-25618 #close
Change-Id: Ie43f2c1d653ac1fda6a6f6faecb7c2ebadaf47c9
Reported-by: George Joseph
Tested-by: George Joseph
An earlier commit changed the id of dynamic contacts to contain
a hash instead of the uri. This patch updates status change
logging to show the aor/uri instead of the id. This required
adding the aor id to contact and contact_status and adding
uri to contact_status. The aor id gets added to contact and
contact_status in their allocators and the uri gets added to
contact_status in pjsip_options when the contact_status is
created or updated.
ASTERISK-25598 #close
Reported-by: George Joseph
Tested-by: George Joseph
Change-Id: I56cbec1d2ddbe8461367dd8b6da8a6f47f6fe511
Currently if a channel is transferred out of a bridge, the BRIDGEPEER
variable (also BRIDGEPVTCALLID) remain set even once the channel is
out of the bridge. This patch removes these variables when leaving
the bridge.
ASTERISK-25600 #close
Reported by: Mark Michelson
Change-Id: I753ead2fffbfc65427ed4e9244c7066610e546da
Several issues are addressed here:
- main() is large, and half of it is only used if we're not rasterisk;
fixed by spliting up the daemon part into a separate function.
- Call ast_term_init from rasterisk as well.
- Remove duplicate code reading/writing asterisk history file.
- Attempt to tackle background color issues and color changes that
occur. Tested by starting asterisk -c until the colors stopped
changing at odd locations.
ASTERISK-25585 #close
Change-Id: Ib641a0964c59ef9fe6f59efa8ccb481a9580c52f
Previously, a trancoding module did not have access to the joint but cached
format. Therefore, the module did not have access to the attributes negotiated
via SDP (line fmtp). Now, a translation module receives the joint format.
ASTERISK-25545 #close
Change-Id: Id6878a989b50573298dab115d3371ea369e1a718
Often, the metric names of statistics we are generating for StatsD have some
dynamic component to them. This can be the name of a particular resource, or
some internal status label in Asterisk. With the current set of functions,
callers of the statsd API must first build the metric name themselves, then
pass this to the API functions. This results in a large amount of boilerplate
code and usage of either fixed length static buffers or dynamic memory
allocation, neither of which is desireable.
This patch adds two new functions to the StatsD API that support a printf
style format specifier for constructing the metric name. A dynamic string,
allocated in threadstorage, is used to build the metric name. This eases
the burden on users of the StatsD API.
Change-Id: If533c72d1afa26d807508ea48b4d8c7b32f414ea
Added a new api to res_statsd.c to allow it to receive a
character pointer for the value argument. This allows for a
'+' and a '-' to easily be sent with the value.
ASTERISK-25419
Reported By: Ashley Sanders
Change-Id: Id6bb53600943d27347d2bcae26c0bd5643567611
In practical tests, we have seen certain taskprocessors, specifically
Stasis subscription taskprocessors, cross the recently-added high-water
mark and emit a warning. This high-water mark warning is only intended
to be emitted when things have tanked on the system and things are
heading south quickly. In the practical tests, the Stasis taskprocessors
sometimes had a max depth of 180 tasks in them, and Asterisk wasn't in
any danger at all.
As such, this ups the high-water mark to 500 tasks instead. It also
redefines the SIP threadpool request denial number to be a multiple of
the taskprocessor high-water mark.
Change-Id: Ic8d3e9497452fecd768ac427bb6f58aa616eebce
We have observed situations where the SIP threadpool may become
deadlocked. However, because incoming traffic is still arriving, the SIP
threadpool's queue can continue to grow, eventually running the system
out of memory.
This change makes it so that incoming traffic gets rejected with a 503
response if the queue is backed up too much.
Change-Id: I4e736d48a2ba79fd1f8056c0dcd330e38e6a3816
A previous commit reduced the AST_BUILDOPTS compiler define to
only include options that affected ABI. This included some options
that were previously displayed by cli "core show settings". This
change corrects the CLI display while still restricting buildopts.h
to ABI effecting options only.
ASTERISK-25434 #close
Reported by: Rusty Newton
Change-Id: Id07af6bedd1d7d325878023e403fbd9d3607e325
Add the ability to filter output from pjsip list and show commands
using the "like" predicate like chan_sip.
For endpoints, aors, auths, registrations, identifyies and transports,
the modification was a simple change of an ast_sorcery_retrieve_by_fields
call to ast_sorcery_retrieve_by_regex. For channels and contacts a
little more work had to be done because neither of those objects are
true sorcery objects. That was just removing the non-matching object
from the final container. Of course, a little extra plumbing in the
common pjsip_cli code was needed to parse the "like" and pass the regex
to the get_container callbacks.
Some of the get_container code in res_pjsip_endpoint_identifier was also
refactored for simplicity.
ASTERISK-25477 #close
Reported by: Bryant Zimmerman
Tested by: George Joseph
Change-Id: I646d9326b778aac26bb3e2bcd7fa1346d24434f1
There have been crashes and general instability seen in the pubsub code,
so this patch introduces three changes to increase the stability.
First, the ownership model for subscriptions has been modified. Due to
RLS, subscriptions are stored in memory as a tree structure. Prior to my
patch, the PJSIP subscription was the owner of the subscription tree.
When the PJSIP subscription told us that it was terminating, we started
destroying the subscription tree along with all of the individual leaf
subscriptions that belong to the tree. The problem with this model is
that the two actors in play here, the PJSIP subscription and the
individual leaf subscriptions, need to have joint ownership of the
subscription tree. So now, the PJSIP subscription and the individual
leaf subscriptions each have a reference to the subscription tree. This
way, we will not actually free memory until no players are left that
care. The PJSIP subscription is a bigger stakeholder, in that if the
PJSIP subscription's reference to the subscription tree is removed, the
subscription tree instructs the leaf subscriptions to shut down and drop
their references to the subscription tree when possible. The individual
leaf subscriptions, upon being told to shut down, can drop their stasis
subscriptions or whatever they use to learn of new state, and then drop
their reference to the subscription tree once they are ready to die.
Second, the lifetime of a PJSIP subscription's reference to our
subscription tree has been altered. As I learned from doing a deep dive,
the PJSIP evsub code can tell Asterisk multiple times that the
subscription has been terminated, and not all of these times
are especially helpful. I have altered the message flow that we use for
SIP subscriptions such that we will always drop the PJSIP subscription's
reference to the subscription tree when we send the NOTIFY that
terminates a SIP subscription. This also means that we will now queue
NOTIFY requests to be sent after responding to incoming SUBSCRIBEs so
that we can have predictable state changes from the PJSIP evsub code.
Third, the synchronization of operations has been improved. PJSIP can
call into our code from a serializer thread (e.g. upon receiving an
incoming request) or from the monitor thread (e.g. when a subscription
times out). Because of this, there is the possibility of competing
threads stepping on each other. PJSIP attempts to do some
synchronization on its own by always keeping the dialog lock held when
it calls into us. However, since we end up pushing tasks into the
serializer, the result was that serialized operations were not grabbing
the dialog lock and could, as a result, step on something that was being
attempted by a different thread. Now we ensure that serialized
operations grab the dialog lock, then check for extenuating
circumstances, then proceed with their operation if they can.
Change-Id: Iff2990c40178dad9cc5f6a5c7f76932ec644b2e5
In a realtime based system with a limited number of threadpool threads
it is possible for a deadlock to occur. This happens when permanent
endpoint state is updated, which will cause database queries to be done.
These queries may result in URI validation being done which is done
synchronously using a PJSIP thread. If all PJSIP threads are in use
processing traffic they themselves may be blocked waiting to get the
permanent endpoint container lock when identifying an endpoint.
This change moves URI validation to occur at use time instead of
configuration time. While this comes at a cost of not seeing a problem
until you use it it does solve the underlying deadlock problem.
ASTERISK-25486 #close
Change-Id: I2d7d167af987d23b3e8199e4a68f3359eba4c76a
This patch adds the ability to subscribe to all events. There are two possible
ways to accomplish this:
(1) On initial WebSocket connection. This patch adds a new query parameter,
'subscribeAll'. If present and True, Asterisk will subscribe the
applications to all ARI events.
(2) Via the applications resource. When subscribing in this manner, an ARI
client should merely specify a blank resource name, i.e., 'channels:'
instead of 'channels:12354'. This will subscribe the application to all
resources of the 'channels' type.
ASTERISK-24870 #close
Change-Id: I4a943b4db24442cf28bc64b24bfd541249790ad6
The default_from_user retrieval function was pulling the
default_from_user from the global configuration struct in an unsafe way.
If using a database as a backend configuration store, the global
configuration struct is short-lived, so grabbing a pointer from it
results in referencing freed memory.
The fix here is to copy the default_from_user value out of the global
configuration struct.
Thanks go to John Hardin for discovering this problem and proposing the
patch on which this fix is based.
ASTERISK-25390 #close
Reported by Mark Michelson
Change-Id: I6b96067a495c1259da768f4012d44e03e7c6148c
When Asterisk sends an outbound SIP request, if there is no direct
reason to place a specific value for the username in the From header,
Asterisk would generate a UUID. For example, this would happen when
sending outbound OPTIONS requests when qualifying or when sending
outbound INVITE requests when originating (if no explicit caller ID were
provided). The issue is that some SIP providers reject these sorts of
requests with a "Name too long" error response.
This patch aims to fix this by changing the default outbound username in
From headers to "asterisk". This value can be overridden by changing the
default_from_user option in the global options if desired.
ASTERISK-25377 #close
Reported by Mark Michelson
Change-Id: I6a4d34a56ff73ff4f661b0075aeba5461b7f3190
The keepalive support in res_pjsip_sdp_rtp currently assumes
that a stream will only be negotiated once. This is false.
If the stream is replaced and later added back it can be
negotiated again causing multiple keepalive scheduled items
to exist. This change explicitly deletes the existing
keepalive scheduled item before adding the new one.
The res_pjsip_sdp_rtp module also does not stop RTP
keepalives or timeout timer if the stream has been
replaced. This change adds a callback to the session media
interface to allow a media stream to be stopped without
the resources being destroyed. This allows the scheduled
items and RTP to be stopped when the stream no longer
exists.
ASTERISK-25356 #close
Change-Id: Ibe6a7cc0927c87326fd5f1c0d4ad889dbfbea1de
Modules commonly used the pj_gethostip function for retrieving the
IP address of the host. This function does not cache the result and may
result in a DNS lookup occurring, or additional work. If the DNS
server is unreachable or network issues arise this can cause the
pj_gethostip function to block for a period of time.
This change adds an ast_sip_get_host_ip and ast_sip_get_host_ip_string
function which does the same thing but caches the host IP address at
module load time. This results in no additional work being done each
time the local host IP address is needed.
ASTERISK-25342 #close
Change-Id: I3205deb679b01fa5ac05a94b623bfd620a2abe1e
Some codecs that may be a third party library to Asterisk need to have
knowledge of the format attributes that were negotiated. Unfortunately,
when the great format migration of Asterisk 13 occurred, that ability
was lost.
This patch adds an API call, ast_format_attribute_get, to the core
format API, along with updates to the unit test to check the new API
call. A new callback is also now available for format attribute modules,
such that they can provide the format attribute values they manage.
Note that the API returns a void *. This is done as the format attribute
modules themselves may store format attributes in any particular manner
they like. Care should be taken by consumers of the API to check the
return value before casting and dereferencing. Consumers will obviously
need to have a priori knowledge of the type of the format attribute as
well.
Change-Id: Ieec76883dfb46ecd7aff3dc81a52c81f4dc1b9e3
An http request can be sent to get the existing Asterisk logs.
The command "curl -v -u user:pass -X GET 'http://localhost:8088
/ari/asterisk/logging'" can be run in the terminal to access the
newly implemented functionality.
* Retrieve all existing log channels
ASTERISK-25252
Change-Id: I7bb08b93e3b938c991f3f56cc5d188654768a808
An http request can be sent to create a log channel
in Asterisk.
The command "curl -v -u user:pass -X POST
'http://localhost:088/ari/asterisk/logging/mylog?
configuration=notice,warning'" can be run in the terminal
to access the newly implemented functionality for ARI.
* Ability to create log channels using ARI
ASTERISK-25252
Change-Id: I9a20e5c75716dfbb6b62fd3474faf55be20bd782
An http request can be sent to delete a log channel
in Asterisk.
The command "curl -v -u user:pass -X DELETE 'http://localhost:8088
/ari/asterisk/logging/mylog'" can be run in the terminal
to access the newly implemented functionally for ARI.
* Able to delete log channels using ARI
ASTERISK-25252
Change-Id: Id6eeb54ebcc511595f0418d586ff55914bc3aae6
This will add ECDH support to Asterisk. It will
detect auto ECDH support in OpenSSL
(1.0.2b and above) during ./configure. If this is
available, it will use it,
otherwise it will fall back to prime256v1 (this
behavior is consistent with
other projects such as Apache and nginx).
This fixes WebRTC being broken in Firefox 38+ due
to Firefox now only supporting
ciphers with perfect forward secrecy.
ASTERISK-25265 #close
Change-Id: I8c13b33a2a79c0bde2e69e4ba6afa5ab9351465b
An http request can be sent to rotate a specified log channel.
If the channel does not exist, an error response will be
returned.
The command "curl -v -u user:pass -X PUT 'http://localhost:8088
/ari/asterisk/logging/logChannelName/rotate'" can be run in the
terminal to access this new functionality.
* Added the ability to rotate log files through ARI
ASTERISK-25252
Change-Id: Iaefa21cbbc1b29effb33004ee3d89c977e76ab01
This change adds support for the 'rtp_timeout' and 'rtp_timeout_hold'
endpoint options. These allow the channel to be hung up if RTP
is not received from the remote endpoint for a specified number of
seconds.
ASTERISK-25259 #close
Change-Id: I3f39daaa7da2596b5022737b77799d16204175b9
This adds an "rtp_keepalive" option for PJSIP endpoints. Similar to the
chan_sip option, this specifies an interval, in seconds, at which we
will send RTP comfort noise frames. This can be useful for keeping RTP
sessions alive as well as keeping NAT associations alive during lulls.
ASTERISK-25242 #close
Reported by Mark Michelson
Change-Id: I06660ba672c0a343814af4cec838e6025cafd54b
Fixes for issues with the ASTERISK-24934 patch.
* Fixed ast_escape_alloc() and ast_escape_c_alloc() if the s parameter is
an empty string. If it were an empty string the functions returned NULL
as if there were a memory allocation failure. This failure caused the AMI
VarSet event to not get posted if the new value was an empty string.
* Fixed dest buffer overwrite potential in ast_escape() and
ast_escape_c(). If the dest buffer size is smaller than the space needed
by the escaped s parameter string then the dest buffer would be written
beyond the end by the nul string terminator. The num parameter was really
the dest buffer size parameter so I renamed it to size.
* Made nul terminate the dest buffer if the source string parameter s was
an empty string in ast_escape() and ast_escape_c().
* Updated ast_escape() and ast_escape_c() doxygen function description
comments to reflect reality.
* Added some more unit test cases to /main/strings/escape to cover the
empty source string issues.
ASTERISK-25255 #close
Reported by: Richard Mudgett
Change-Id: Id77fc704600ebcce81615c1200296f74de254104
An http request can be sent to reload an Asterisk module. If the
module can not be reloaded or is not already loaded, an error
response will be returned.
The command "curl -v -u user:pass -X PUT 'http://localhost:8088
/ari/asterisk/modules/{moduleName}'" (or something similar, based
on configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Asterisk modules can be reloaded through http requests
ASTERISK-25173
Change-Id: I289188bcae182b2083bdbd9ebfffd50b62f58ae1
An http request can be sent to retrieve information on a single
module, including the resource name, description, use count, status,
and support level.
The command "curl -v -u user:pass -X GET 'http://localhost:8088/ari
/asterisk/modules/{moduleName}'" (or something similar, depending on
configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Information on a single module can now be retrieved
ASTERISK-25173
Change-Id: Ibce5a94e70ecdf4e90329cf0ba66c33a62d37463
During an attended transfer a thread is started that handles imparting the
bridge channel. From the start of the thread to when the bridge channel is
ready exists a gap that can potentially cause problems (for instance, the
channel being swapped is hung up before the replacement channel enters the
bridge thus stopping the transfer). This patch adds a condition that waits
for the impart thread to get to a point of acceptable readiness before
allowing the initiating thread to continue.
ASTERISK-24782
Reported by: John Bigelow
Change-Id: I08fe33a2560da924e676df55b181e46fca604577
An http request can be sent to retrieve a list of all existing modules,
including the resource name, description, use count, status, and
support level.
The command "curl -v -u user:pass -X GET 'http://localhost:8088/ari/
asterisk/modules" (or something similar, depending on configuration)
can be run in the terminal to access this new functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Information on modules can now be retrieved
Change-Id: I63cbbf0ec0c3544cc45ed2a588dceabe91c5e0b0
Gerrit is complaining of conflicts when trying to create a patch series
of all of the cherry-picked master commits, so I have instead squashed
it all into one commit.
ASTERISK-25067 #close
Reported by: Matt Jordan
Change-Id: I6dda90343fae24a75dc5beec84980024e8d61eb9
When res_pjsip body generator modules were generating XML or XPIDF
response bodies, there was a chance that the generated body would be the
exact size of the supplied buffer. Adding the nul string terminator would
then write beyond the end of the buffer and potentially corrupt memory.
* Fix MALLOC_DEBUG high fence violations caused by adding a nul string
terminator on the end of a buffer for XML or XPIDF response bodies.
* Made calls to pj_xml_print() safer if the XML prolog is requested. Due
to a bug in pjproject, the return value could be -1 _or_
AST_PJSIP_XML_PROLOG_LEN if the supplied buffer is not large enough.
* Updated the doxygen comment of AST_PJSIP_XML_PROLOG_LEN to describe the
return value of pj_xml_print() when the supplied buffer is not large
enough.
ASTERISK-25168
Reported by: Carl Fortin
Change-Id: Id70e1d373a6a2b2bd9e678b5cbc5e55b308981de
All send/receive processing for a SIP transaction needs to be done under
the same threadpool serializer to prevent reentrancy problems inside
pjproject and res_pjsip.
* Add threadpool API call to get the current serializer associated with
the worker thread.
* Pick a serializer from a pool of default serializers if the caller of
res_pjsip.c:ast_sip_push_task() does not provide one.
This is a simple way to ensure that all outgoing SIP request messages are
processed under a serializer. Otherwise, any place where a pushed task is
done that would result in an outgoing out-of-dialog request would need to
be modified to supply a serializer. Serializers from the default
serializer pool are picked in a round robin sequence for simplicity.
A side effect is that the default serializer pool will limit the growth of
the thread pool from random tasks. This is not necessarily a bad thing.
* Made pjsip_distributor.c save the thread's serializer name on the
outgoing request tdata struct so the response can be processed under the
same serializer.
This is a cherry-pick from master.
**** ASTERISK-25115 Change-Id: Iea71c16ce1132017b5791635e198b8c27973f40a
NOTE: session_inv_on_state_changed() is disassociating the dialog from the
session when the invite dialog becomes PJSIP_INV_STATE_DISCONNECTED.
Unfortunately this is a tad too soon because our BYE request transaction
has not completed yet.
ASTERISK-25183 #close
Reported by: Matt Jordan
Change-Id: I8bad0ae1daf18d75b8c9e55874244b7962df2d0a
A module trying to unload needs to wait for all serializers it creates and
uses to complete processing before unloading.
ASTERISK-24907
Reported by: Kevin Harwell
Change-Id: I8c80b90f2f82754e8dbb02ddf3c9121e5e966059
Find and unlink the specified sorcery object type to complement
ast_sorcery_object_register(). Without this function you cannot
completely unload individual modules that use sorcery for configuration.
ASTERISK-24907
Reported by: Kevin Harwell
Change-Id: I1c04634fe9a90921bf676725c7d6bb2aeaab1c88
Added checks when a unit test is registered to see that the summary and
description strings do not end with a new-line '\n' for consistency.
The check generates a warning message and will cause the
/main/test/registrations unit test to fail.
* Updated struct ast_test_info member doxygen comments.
Change-Id: I295909b6bc013ed9b6882e85c05287082497534d
The res_pjsip_mwi previously required a reload to set up the proper
subscriptions to allow unsolicited MWI to work. This change
makes it so the act of registering will also cause this to occur.
This is particularly useful if realtime is involved as no reload
needs to occur within Asterisk to cause the MWI information
to get sent.
ASTERISK-25180 #close
Change-Id: Id847b47de4b8b3ab8858455ccc2f07b0f915f252
Some phones send g.726 audio packed for AAL2, which differs from what is
recommended by RFC 3351. If Asterisk receives audio formatted as such when
negotiating g.726 then it sounds a bit distorted. Added an option to
res_pjsip_endpoint that allows g.726 negotiated audio to be treated as g.726
AAL2 packed.
ASTERISK-25158 #close
Reported by: Steve Pitts
Change-Id: Ie7e21f75493d7fe53e75e12c971e72f5afa33615
Although ast_context_find, ast_context_find_or_create and
ast_context_destroy perform locking of the contexts table,
any context pointer can become invalid at any time that the
contexts table is unlocked. This change adds locking around
all complete operations involving these functions.
Places where ast_context_find was followed by ast_context_destroy
have been replaced with calls ast_context_destroy_by_name.
ASTERISK-25094 #close
Reported by: Corey Farrell
Change-Id: I1866b6787730c9c4f3f836b6133ffe9c820734fa
So this issue is a bit complicated. Since it is possible to pass values to AMI
that contain a '\r\n' (or other similar sequences) these values need to be
escaped. One way to solve this is to escape the values and then pass the escaped
values to the AMI variable parameter string building function. However, this
puts the onus on the pre-build function to escape all string values. This
potentially requires a fair amount of changes along with a lot of string
allocations/freeing for all values.
Surely there is a way to push this complexity down a level into the string
building function itself? This of course is possible, but ends up requiring a
way to distinguish between strings that need to be escaped and those that don't.
The best way to handle this is by introducing a new format specifier in the
format string. For instance a %s (no escape) and %S (escape). However, that is
a bit weird and unexpected.
So faced with those possibilities this patch implements a limited version of the
first option. Instead of attempting to escape all string values this patch only
escapes those values that make sense. This approach limits the number of changes
and doesn't suffer from the odd format specifier problem.
ASTERISK-24934 #close
Reported by: warren smith
Change-Id: Ib55a5b84fe0481b0f2caaaab68c566f392c0aac0
The length of frames retured by sample functions was twice as large as
real, what caused global buffer overflow caught by AddressSanitizer.
ASTERISK-24717 #close
Reported by: Badalian Vyacheslav
Change-Id: Iec2fe682aef13e556684912f906bedf7c18229c6
When an endpoint was created, it's messages were being forwarded to
both the tech endpoint topic and the all endpoints topic. Since
the tech topic was also forwarded to all, this was resulting in
duplicate messages whenever an endpoint published. This patch
causes the endpoint to only forward to the tech topic and lets
the tech topic forward to all.
To accomplish this, the existing stasis_cp_single_create function
(which both creates and forwards) was cloned and split into 2
functions, one that creates the topic and one that sets up the
forwarding. This allows endpoint_internal_create to create
the topic from the endpoint_all cache without forwarding it there,
then allows it to do the forward to the tech's topic.
ASTERISK-25137 #close
Reported-by: Vitezslav Novy
ASTERISK-25116 #close
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
Change-Id: I26d7d4926a0861748fd3bdffe316b75b549a801c
Add a new ContactStatus AMI event.
Publish the following status/state changes:
Created
Removed
Reachable
Unreachable
Unknown
Contact URI, new status/state, aor and endpoint names, and the
last qualify rtt result are included in the event.
ASTERISK-25114 #close
Change-Id: Id25aae5f7122facba183273efb3e8f36c20fb61e
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
Many uses of stasis_unsubscribe in modules can be reached through unload.
These have been switched to stasis_unsubscribe_and_join.
Some subscription callbacks do nothing, for these I've created a noop
callback function in stasis.c. This is used by some modules that monitor
MWI topics in order to enable cache, since the callback does not become
invalid after dlclose it is safe to use stasis_unsubscribe on these, even
during module unload.
ASTERISK-25121 #close
Change-Id: Ifc2549fbd8eef7d703c222978e8f452e2972189c
This patch refactors the transaction timeout processing to eliminate
calling the lower level public pjsip functions and reverts to calling
pjsip_endpt_send_request again. This is the result of me noticing
a possible incompatibility with pjproject-2.4 which was causing
contact status flapping.
The original version of this feature used the lower level calls to
get access to the tsx structure in order to cancel the transaction
when our own timer expires. Since we no longer have that access,
if our own timer expires before the pjsip timer, we call the callbacks
and just let the pjsip transaction take it's own course. When the
transaction ends, it discovers the callbacks have already been run
and just cleans itself up.
A few messages in pjsip_configuration were also added/cleaned up.
ASTERISK-25105 #close
Change-Id: I0810f3999cf63f3a72607bbecac36af0a957f33e
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
Currently, everytime a sample rate change occurs (on read or write) the
associated factory buffers are reset. If the requested sample rate on a
read differed from that of a write then the buffers are continually reset
on every read and write. This has the side effect of emptying the buffer,
thus there being no data to read and then write to a file in the case of
call recording.
This patch fixes it so that an audiohook_list's rate always maintains the
maximum sample rate among hooks and formats. Audiohook sample rates are
only overwritten by this value when slin native compatibility is turned on.
Also, the audiohook sample rate can only overwrite the list's sample rate
when its rate is greater than that of the list or if compatibility is
turned off. This keeps the rate from constantly switching/resetting.
ASTERISK-24944 #close
Reported by: Ronald Raikes
Change-Id: Idab4dfef068a7922c09cc631dda27bc920a6c76f
This patch updates http_websocket and its corresponding implementation
with a pre-session established callback. This callback allows for
WebSocket server consumers to be notified when a WebSocket connection is
attempted, but before we accept it. Consumers can choose to reject the
connection, if their application specific logic allows for it.
As a result, this patch pulls out the previously private
websocket_protocol struct and makes it public, as
ast_websocket_protocol. In order to preserve backwards compatibility
with existing modules, the existing APIs were left as-is, and new APIs
were added for the creation of the ast_websocket_protocol as well as for
adding a sub-protocol to a WebSocket server.
In particular, the following new API calls were added:
* ast_websocket_add_protocol2 - add a protocol to the core WebSocket
server
* ast_websocket_server_add_protocol2 - add a protocol to a specific
WebSocket server
* ast_websocket_sub_protocol_alloc - allocate a sub-protocol object.
Consumers can populate this with whatever callbacks they wish to
support, then add it to the core server or a specified server.
ASTERISK-24988
Reported by: Joshua Colp
Change-Id: Ibe0bbb30c17eec6b578071bdbd197c911b620ab2
The config wizard was always pulling the first occurrence of
a variable from an ast_variable list but this gets the template
value from the list instead of any overridden value. This patch
creates ast_variable_find_last_in_list() in config.c and updates
res_pjsip_config_wizard to use it instead of
ast_variable_find_in_list. Now the overridden values, where they
exist, are used instead of template variables.
Updated test_config to test the new API.
ASTERISK-25089 #close
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
Change-Id: Ifa7ddefc956a463923ee6839dd1ebe021c299de4
Currently you can 'apply' a wizard to an object type but the wizard
always goes at the end of the object type's wizard list. This patch
adds a new ast_sorcery_insert_wizard_mapping function that allows
you to insert a wizard anyplace in the list. I.E. You could
add a caching wizard to an object type and place it before all
wizards.
ast_sorcery_get_wizard_mapping_count and
ast_sorcery_get_wizard_mapping were added to allow examination
of the mapping list.
ast_sorcery_remove_mapping was added to remove a mapping by name.
As part of this patch, the object type's wizard list was converted
from an ao2_container to an AST_VECTOR_RW.
A new test was added to test_sorcery for this capability.
ASTERISK-25044 #close
Change-Id: I9d2469a9296b2698082c0989e25e6848dc403b57
Based on feedback from Corey Farrell and Y Ateya, a few new
macros have been added...
AST_VECTOR_REMOVE which takes a parameter to indicate if
order should be preserved.
AST_VECTOR_ADD_SORTED which adds an element to
a sorted vector.
AST_VECTOR_RESET which cleans all elements from the vector
leaving the storage intact.
Change-Id: I41d32dbdf7137e0557134efeff9f9f1064b58d14
The res_pjsip_exten_state module currently has a race condition between
processing the extension state callback from the PBX core and processing
the subscription shutdown callback from res_pjsip_pubsub. There is currently
no synchronization between the two. This can present a problem as while
the SIP subscription will remain valid the tree it points to may not.
This is in particular a problem as a task to send a NOTIFY may get queued
which will try to use the tree that may no longer be valid.
This change does the following to fix this problem:
1. All access to the subscription tree is done within the task that
sends the NOTIFY to ensure that no other thread is modifying or
destroying the tree. This task executes on the serializer for the
subscriptions.
2. A reference to the subscription serializer is kept to ensure it
remains valid for the lifetime of the extension state subscription.
3. The NOTIFY task has been changed so it will no longer attempt
to send a NOTIFY if the subscription has already been terminated.
ASTERISK-25057 #close
Reported by: Matt Jordan
Change-Id: I0b3cd2fac5be8d9b3dc5e693aaa79846eeaf5643
After using the new vector stuff for real I found...
A bug in AST_VECTOR_INSERT_AT that could cause a seg fault.
The callbacks needed to be closer to ao2_callback in behavior
WRT to CMP_MATCH and CMP_STOP behavior and the ability to return
a vector of matched entries.
A pre-existing issue with APPEND and REPLACE was also fixed.
I also added a new macro to test.h that acts like ast_test_validate
but also accepts a return code variable and a cleanup label. As well
as printing the error, it sets the rc variable to AST_TEST_FAIL and
does a goto to the specified label on error. I had a local version
of this in test_vector so I just moved it.
ASTERISK-25045
Change-Id: I05e5e47fd02f61964be13b7e8942bab5d61b29cc
Renamed AST_VECTOR_INSERT to AST_VECTOR_REPLACE because it really
does replace not insert. The few users of AST_VECTOR_INSERT were
refactored. Because these are macros, there should be no ABI
compatibility issues.
Added AST_VECTOR_INSERT_AT that actually inserts an element into the
vector at a specific index pushing existing elements to the right.
Added AST_VECTOR_GET_CMP that can retrieve from the vector based
on a user-provided compare function.
Added AST_VECTOR_CALLBACK function that will execute a function
for each element in the vector. Similar to ao2_callback and
ao2_callback_data functions although the vector callback can take
a variable number of arguments. This should allow easy migration
to a vector where a container might be too heavy.
Added read/write locked vector and lock manipulation macros.
Added unit tests.
ASTERISK-25045 #close
Change-Id: I2e07ecc709d2f5f91bcab8904e5e9340609b00e0
A few cases exist where headers of optional_api provders are included but
not needed. This causes unneeded calls to ast_optional_api_use.
* Don't include optional_api.h from sip_api.h.
* Move 'struct ast_channel_monitor' to channel.h.
* Don't include monitor.h from chan_sip.c, channel.c or features.c.
The move of struct ast_channel_monitor is needed since channel.c depends on
it. This has no effect on users of monitor.h since channel.h is included
from monitor.h.
ASTERISK-25051 #close
Reported by: Corey Farrell
Change-Id: I53ea65a9fc9693c89f8bcfd6120649bfcfbc3478
Created autoconf/ast_check_raii.m4: contains AST_CHECK_RAII which
checks compiler requirements for RAII:
gcc: -fnested-functions support
clang: -fblocks (and if required -lBlocksRuntime)
The original check was implemented in configure.ac and now has it's
own file. This function also sets C_COMPILER_FAMILY to either gcc or
clang for use by makefile
Created autoconf/ast_check_strsep_array_bounds.m4 (contains
AST_CHECK_STRSEP_ARRAY_BOUNDS):
which checks if clang is able to handle the optimized strsep & strcmp
functions (linux). If not, the standard libc implementation should be
used instead. Clang + the optimized macro's work with:
strsep(char *, char []), but not with strsepo(char *, char *).
Instead of replacing all the occurences throughout the source code,
not using the optimized macro version seemed easier
See 'define __strcmp_gc(s1, s2, l2) in bits/string2.h':
llvm-comment: Normally, this array-bounds warning are suppressed for
macros, so that unused paths like the one that accesses __s1[3] are
not warned about. But if you preprocess manually, and feed the
result to another instance of clang, it will warn about all the
possible forks of this particular if statement. Instead of switching
of this optimization, another solution would be to run the preproces-
sing step with -frewrite-includes, which should preserve enough
information so that clang should still be able to suppress the diag-
nostic at the compile step later on.
See also "https://llvm.org/bugs/show_bug.cgi?id=20144"
See also "https://llvm.org/bugs/show_bug.cgi?id=11536"
Makefile.rules: If C_COMPILER_FAMILY=clang then add two warning
suppressions:
-Wno-unused-value
-Wno-parentheses-equality
In an earlier review (reviewboard: 4550 and 4554), they were deemed a
nuisace and less than benefitial.
configure.ac:
Added AST_CHECK_RAII() see earlier
Added AST_CHECK_STRSEP_ARRAY_BOUNDS() see earlier
Removed moved content
ASTERISK-24917
Change-Id: I12ea29d3bda2254ad3908e279b7effbbac6a97cb
A previous set of patches (see: ASTERISK-22790 & ASTERISK-23231) made it so
a v.27 modem was not allowed to have a minimum transmission rate of 2400 bits
per second. This reverts all or some of those patches since according to the
v.27ter standard a rate of 2400 bits per second is also supported.
One of the original patches also added 9600 bits per second support for v.27.
This patch also removes that since v.27ter only supports 2400/4800 bits per
second.
Also, since Asterisk specifically supports v.27ter the enum was renamed to
better reflect this.
ASTERISK-24955 #close
Reported by: Matt Jordan
Change-Id: I4b9dfb6bf7eff08463ab47ee1a74224f27cae733
This is the Asterisk 13 version of a change to master that allows for
registration responses to be processed successfully potentially after
the original transaction has timed out. The main difference between this
and the master change is that the master version has API changes that
are unacceptable for 13. For 13, this is worked around by adding a new
API call that the outbound registration code uses instead.
The following is the text from the master version of this commit:
Odd behaviors have been observed during outbound registrations. The most
common problem witnessed has been one where a request with
authentication credentials cannot be created after receiving a 401
response. Other behaviors include apparently processing an incorrect SIP
response.
Inspecting the code led to an apparent issue with regards to how we
handle transactions in outbound registration code. When a response to a
REGISTER arrives, we save a pointer to the transaction and then push a
task onto the registration serializer. Between the time that we save the
pointer and push the task, it's possible for the transaction to be
destroyed due to a timeout. It's also possible for the address to be
reused by the transaction layer for a new transaction.
To allow for authentication of a REGISTER request to be authenticated
after the transaction has timed out, we now also hold a reference to the
original REGISTER request instead of the transaction. The function for
creating a request with authentication has been altered to take the
original request instead of the transaction where the original request
was sent.
ASTERISK-25020
Reported by Mark Michelson
Change-Id: If1ee5f601be839479a219424f0358a229f358f7c
- When you need to refer to 'variable XXX' outside a block, it needs
to be declared as '__block XXX', otherwise it will not be available with-
in the block, making updating that variable hard to do, and ast_free
lead to issues.
- Removed the #error message
because it creates complications when compiling external projects
against asterisk For example when using a different compiler than the
one used to compile asterisk. The warning/error should be generated
during the configure process not the compilation process
ASTERISK-24917
Change-Id: I12091228090e90831bf2b498293858f46ea7a8c2
The "Add qualify_timeout processing and eventing" patch introduced
an issue where contacts that had qualify_frequency set to 0 were
showing Unavailable instead Unknown. This patch checks for
qualify_frequency=0 and create an "Unknown" contact_status
with an RTT = 0.
Previously, the lack of contact_status implied Unknown but since
we're now changing endpoint state based on contact_status, I've
had to add new UNKNOWN status so that changes could trigger the
appropriate contact_status observers.
ASTERISK-24977: #close
Change-Id: Ifcbc01533ce57f0e4e584b89a395326e098b8fe7
When DEBUG_THREADLOCALS is enabled it causes the threadlocal cleanup to be
called as a function. This causes a compile error with raw threadstorage as
it uses NULL for cleanup. This fix uses a macro that provides NULL when
DEBUG_THREADLOCALS is disabled, and replaces the call to "c_cleanup(data);"
with "{};" when DEBUG_THREADLOCALS is enabled.
ASTERISK-24975 #close
Reported by: Ashley Sanders
Change-Id: I3ef7428ee402816d9fcefa1b3b95830c00d5c402
A potential problem that can arise is the following:
* Bob's phone is programmed to automatically forward to Carol.
* Carol's phone is programmed to automatically forward to Bob.
* Alice calls Bob.
If left unchecked, this results in an endless loops of call forwards
that would eventually result in some sort of fiery crash.
Asterisk's method of solving this issue was to track which interfaces
had been dialed. If a destination were dialed a second time, then
the attempt to call that destination would fail since a loop was
detected.
The problem with this method is that call forwarding has evolved. Some
SIP phones allow for a user to manually forward an incoming call to an
ad-hoc destination. This can mean that:
* There are legitimate use cases where a device may be dialed multiple
times, or
* There can be human error when forwarding calls.
This change removes the old method of detecting forwarding loops in
favor of keeping a count of the number of destinations a channel has
dialed on a particular branch of a call. If the number exceeds the
set number of max forwards, then the call fails. This approach has
the following advantages over the old:
* It is much simpler.
* It can detect loops involving local channels.
* It is user configurable.
The only disadvantage it has is that in the case where there is a
legitimate forwarding loop present, it takes longer to detect it.
However, the forwarding loop is still properly detected and the
call is cleaned up as it should be.
Address review feedback on gerrit.
* Correct "mfgium" to "Digium"
* Decrement max forwards by one in the case where allocation of the
max forwards datastore is required.
* Remove irrelevant code change from pjsip_global_headers.c
ASTERISK-24958 #close
Change-Id: Ia7e4b7cd3bccfbd34d9a859838356931bba56c23
This is the second follow-on to https://reviewboard.asterisk.org/r/4572/ and the
discussion at
http://lists.digium.com/pipermail/asterisk-dev/2015-March/073921.html
The basic issues are that changes in contact status don't cause events to be
emitted for the associated endpoint. Only dynamic contact add/delete actions
update the endpoint. Also, the qualify timeout is fixed by pjsip at 32 seconds
which is a long time.
This patch makes use of the new transaction timeout feature in r4585 and
provides the following capabilities...
1. A new aor/contact variable 'qualify_timeout' has been added that allows the
user to specify the maximum time in milliseconds to wait for a response to an
OPTIONS message. The default is 3000ms. When the timer expires, the contact is
marked unavailable.
2. Contact status changes are now propagated up to the endpoint as follows...
When any contact is 'Available', the endpoint is marked as 'Reachable'. When
all contacts are 'Unavailable', the endpoint is marked as 'Unreachable'. The
existing endpoint events are generated appropriately.
ASTERISK-24863 #close
Change-Id: Id0ce0528e58014da1324856ea537e7765466044a
Tested-by: Dmitriy Serov
Tested-by: George Joseph <george.joseph@fairview5.com>
This is the first follow-on to https://reviewboard.asterisk.org/r/4572/ and the
discussion at
http://lists.digium.com/pipermail/asterisk-dev/2015-March/073921.html
Since we currently have no control over pjproject transaction timeout, this
patch pulls the pjsip_endpt_send_request function out of pjproject and into
res_pjsip/endpt_send_transaction in order to implement that capability.
Now when the transaction is initiated, we also schedule our own pj_timer with
our own desired timeout.
If the transaction completes before either timeout, pjproject cancels its timer,
and calls our tsx callback where we cancel our timer and run the app callback.
If the pjproject timer times out first, pjproject calls our tsx callback where
we cancel our timer and run the app callback.
If our timer times out first, we terminate the transaction which causes
pjproject to cancel its timer and call our tsx callback where we run the app
callback.
Regardless of the scenario, pjproject is calling the tsx callback inside the
group_lock and there are checks in the callback to make sure it doesn't run
twice.
As part of this patch ast_sip_send_out_of_dialog_request was created to replace
its similarly named private function. It takes a new timeout argument in
milliseconds (<= 0 to disable the timeout).
ASTERISK-24863 #close
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
Change-Id: I0778dc730d9689c5147a444a04aee3c1026bf747
Currently when Asterisk starts initial qualifies of contacts are spread out
randomly between 0 and qualify_timeout to prevent network and system overload.
If a contact's qualify_frequency is 5 minutes however, that contact may be
unavailable to accept calls for the entire 5 minutes after startup. So while
staggering the initial qualifies is a good idea, basing the time on
qualify_timeout could leave contacts unavailable for too long.
This patch adds a new global parameter "max_initial_qualify_time" that sets the
maximum time for the initial qualifies. This way you could make sure that all
your contacts are initialy, randomly qualified within say 30 seconds but still
have the contact's ongoing qualifies at a 5 minute interval.
If max_initial_qualify_time is > 0, the formula is initial_interval =
min(max_initial_interval, qualify_timeout * random(). If not set,
qualify_timeout is used.
The default is "0" (disabled).
ASTERISK-24863 #close
Change-Id: Ib80498aa1ea9923277bef51d6a9015c9c79740f4
Tested-by: George Joseph <george.joseph@fairview5.com>
Git does not support the ability to replace a token with a version
string during check-in. While it does have support for replacing a
token on clone, this is somewhat sub-optimal: the token is replaced
with the object hash, which is not particularly easy for human
consumption. What's more, in practice, the source file version was often
not terribly useful. Generally, when triaging bugs, the overall version
of Asterisk is far more useful than an individual SVN version of a file.
As a result, this patch removes Asterisk's support for showing source file
versions.
Specifically, it does the following:
* main/asterisk:
- Refactor the file_version structure to reflect that it no longer
tracks a version field.
- Alter the "core show file version" CLI command such that it always
reports the version of Asterisk. The file version is no longer
available.
* main/manager: The Version key now always reports the Asterisk version.
* UPGRADE: Add notes for:
- Modification to the ModuleCheck AMI Action.
- Modification of the "core show file version" CLI command.
Change-Id: Ia932d3c64cd18a14a3c894109baa657ec0a85d28
Add the .gitignore and .gitreview files to the asterisk repo.
NB: You can add local ignores to the .git/info/exclude file
without having to do a commit.
Common ignore patterns are in the top-level .gitignore file.
Subdirectory-specific ignore patterns are in their own .gitignore
files.
Change-Id: I4c8af3b8e3739957db545f7368ac53f38e99f696
Tested-by: George Joseph
With this patch, chan_pjsip/res_pjsip now sets the native formats to the
codecs negotiated by a call.
* The changes in chan_pjsip.c and res_pjsip_sdp_rtp.c set the native
formats to include all the negotiated audio codecs instead of only the
initial preferred audio codec and later the currently received audio
codec.
* The audio frame handling in channel.c:ast_read() is more streamlined and
will automatically adjust to changes in received frame formats. The new
policy is to remove translation and pass the new frame format to the
receiver except if the translation was to a signed linear format. A more
long winded version is commented in ast_read() along with some caveats.
* The audio frame handling in channel.c:ast_write() is more streamlined
and will automatically adjust any needed translation to changes in the
frame formats sent. Frame formats sent can change for many reasons such
as a recording is being played back or the bridged peer changed the format
it sends. Since it is a normal expectation that sent formats can change,
the codec mismatch warning message is demoted to a debug message.
* Removed the short circuit check in
channel.c:ast_channel_make_compatible_helper(). Two party bridges need to
make channels compatible with each other. However, transfers and moving
channels among bridges can result in otherwise compatible channels having
sub-optimal translation paths if the make compatible check is short
circuited. A result of forcing the reevaluation of channel compatibility
is that the asterisk.conf:transcode_via_slin and codecs.conf:genericplc
options take effect consistently now. It is unfortunate that these two
options are enabled by default and negate some of the benefits to the
changes in channel.c:ast_read() by forcing translation through signed
linear on a two party bridge.
* Improved the softmix bridge technology to better control the translation
of frames to the bridge. All of the incoming translation is now normally
handled by ast_read() instead of splitting any translation steps between
ast_read() and the slin factory. If any frame comes in with an unexpected
format then the translation path in ast_read() is updated for the next
frame and the slin factory handles the current frame translation.
This is the final patch in a series of patches aimed at improving
translation path choices. The other patches are on the following reviews:
https://reviewboard.asterisk.org/r/4600/https://reviewboard.asterisk.org/r/4605/
ASTERISK-24841 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/4609/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434671 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds support for automatically detecting the type of DTMF that a
PJSIP endpoint supports. When the 'dtmf_mode' endpoint option is set to 'auto',
the channel created for an endpoint will attempt to determine if RFC 4733
DTMF is supported. If so, it will use that DTMF type. If not, the DTMF type
for the channel will be set to inband.
Review: https://reviewboard.asterisk.org/r/4438
ASTERISK-24706 #close
Reported by: yaron nahum
patches:
yaron_patch_3_Feb.diff submitted by yaron nahum (License 6676)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434637 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes autological comparison warnings in the following:
* chan_skinny: letohl may return a signed or unsigned value, depending on the
macro chosen
* func_curl: Provide a specific cast to CURLoption to prevent mismatch
* cel: Fix enum comparisons where the enum can never be negative
* enum: Fix comparison of return result of dn_expand, which returns a signed
int value
* event: Fix enum comparisons where the enum can never be negative
* indications: tone_data.freq1 and freq2 are unsigned, and hence can never be
negative
* presencestate: Use the actual enum value for INVALID state
* security_events: Fix enum comparisons where the enum can never be negative
* udptl: Don't bother to check if the return value from encode_length is less
than 0, as it returns an unsigned int
* translate: Since the parameters are unsigned int, don't bother checking
to see if they are negative. The cast to unsigned int would already blow
past the matrix bounds.
* res_pjsip_exten_state: Use a temporary value to cache the return of
ast_hint_presence_state
* res_stasis_playback: Fix enum comparisons where the enum can never be
negative
* res_stasis_recording: Add an enum value for the case where the recording
operation is in error; fix enum comparisons
* resource_bridges: Use enum value as opposed to -1
* resource_channels: Use enum value as opposed to -1
Review: https://reviewboard.asterisk.org/r/4533
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4533.patch submitted by dkdegroot (License 6600)
........
Merged revisions 434469 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434470 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a channel enters the bridging system it is first made compatible with
the bridge and then the bridge technology makes the channel compatible
with the technology. For all but the DAHDI native and softmix bridge
technologies the make channel compatible with the bridge step is an
effective noop because the other technologies allow all audio formats.
For the DAHDI native bridge technology it doesn't matter because it is not
an initial bridge technology and chan_dahdi allows only one native format
per channel. For the softmix bridge technology, it is a noop at best and
harmful at worst because the wrong translation path could be setup if the
channel's native formats allow more than one audio format.
This is an intermediate patch for a series of patches aimed at improving
translation path choices.
* Removed code dealing with the unnecessary step of making the channel
compatible with the bridge.
ASTERISK-24841
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/4600/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434424 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These are fixes for compilation under gcc 5.0...
chan_sip.c: In parse_request needed to make 'lim' unsigned.
inline_api.h: Needed to add a check for '__GNUC_STDC_INLINE__' to detect C99
inline semantics (same as clang).
ccss.c: In ast_cc_set_parm, needed to fix weird comparison.
dsp.c: Needed to work around a possible compiler bug. It was throwing
an array-bounds error but neither
sgriepentrog, rmudgett nor I could figure out why.
manager.c: In action_atxfer, needed to correct an array allocation.
This patch will go to 11, 13, trunk.
Review: https://reviewboard.asterisk.org/r/4581/
Reported-by: Jeffrey Ollie
Tested-by: George Joseph
ASTERISK-24932 #close
........
Merged revisions 434113 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434114 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A change in r430179 inserted a variable near the top of a
structure caused a problem when running DPMA in a version
of Asterisk compiled across the change. This patch moves
the new variable to the end of the structure, eliminating
the problem.
Review: https://reviewboard.asterisk.org/r/4574/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433944 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes some invalid enum conversion warnings caught by clang. In
particular:
* chan_sip: Several functions mixed usage of the st_refresher_param
enum and st_refresher enum. This patch corrects the functions to use the
right enum.
* chan_pjsip: Fixed mixed usage of ast_sip_session_t38state and ast_t38_state.
* strings: Fixed incorrect usage of AO2 flags with strings container.
* res_stasis: Change a return enumeration to stasis_app_user_event_res.
Review: https://reviewboard.asterisk.org/r/4535
ASTERISK-24917
Reported by: dkdegroot
patches:
rb4535.patch submitted by dkdegroot (License 6600)
........
Merged revisions 433746 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433747 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk had an issue where retransmissions of MESSAGE requests resulted in
Asterisk processing the retransmission as if it were a new MESSAGE request.
This patch fixes the issue by creating a transaction in PJSIP on the incoming
request. This way, if a retransmission arrives, the PJSIP transaction layer
will resend the response and Asterisk will not ever see the retransmission.
ASTERISK-24920 #close
Reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/4532/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433619 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces a new logger routine ast_log_safe. This routine should be
used for all error messages in code that can be run as a result of ast_log.
ast_log_safe does nothing if run recursively. All error logging in
astobj2.c, strings.c and utils.h have been switched to ast_log_safe.
This required adding support for raw threadstorage. This provides direct
access to the void* pointer in threadstorage. In ast_log_safe, NULL is used
to signify that this thread is not already running ast_log_safe, (void*)1 when
it is already running. This was done since it's critical that ast_log_safe
do nothing that could log during recursion checking.
ASTERISK-24155 #close
Reported by: Timo Teräs
Review: https://reviewboard.asterisk.org/r/4502/
........
Merged revisions 433522 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since 'core stop now' and 'core restart now' do not stop modules,
it is unsafe for most of the core to run cleanups. Originally all
cleanups used ast_register_atexit, and were only changed when it
was shown to be unsafe. ast_register_atexit is now used only when
absolutely required to prevent corruption and close child processes.
Exceptions that need to use ast_register_atexit:
* CDR: Flush records.
* res_musiconhold: Kill external applications.
* AstDB: Close the DB.
* canary_exit: Kill canary process.
ASTERISK-24142 #close
Reported by: David Brillert
ASTERISK-24683 #close
Reported by: Peter Katzmann
ASTERISK-24805 #close
Reported by: Badalian Vyacheslav
ASTERISK-24881 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4500/
Review: https://reviewboard.asterisk.org/r/4501/
........
Merged revisions 433495 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Attempting to execute DTMF in a confbridge while file playback (prompt,
announcement, etc) is occurring is not allowed. You have to wait until
the sound file has completed before entering DTMF. This patch fixes it
so that app_confbridge now monitors for dtmf key presses during menu
driven file playback. If a key is pressed playback stops and it executes
the matched menu option.
ASTERISK-24864 #close
Reported by: Steve Pitts
Review: https://reviewboard.asterisk.org/r/4510/
........
Merged revisions 433445 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433446 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Incoming PJSIP call legs that have not been answered yet send unnecessary
"180 Ringing" or "183 Progress" messages every time a connected line
update happens. If the outgoing channel is also PJSIP then the incoming
channel will always send a "180 Ringing" or "183 Progress" message when
the outgoing channel sends the INVITE.
Consequences of these unnecessary messages:
* The caller can start hearing ringback before the far end even gets the
call.
* Many phones tend to grab the first connected line information and refuse
to update the display if it changes. The first information is not likely
to be correct if the call goes to an endpoint not under the control of the
first Asterisk box.
When connected line first went into Asterisk in v1.8, chan_sip received an
undocumented option "rpid_immediate" that defaults to disabled. When
enabled, the option immediately passes connected line update information
to the caller in "180 Ringing" or "183 Progress" messages as described
above.
* Added "rpid_immediate" option to prevent unnecessary "180 Ringing" or
"183 Progress" messages. The default is "no" to disable sending the
unnecessary messages.
ASTERISK-24781 #close
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/4473/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433338 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Locate potential crashes by exercising seldom
used code paths. This patch introduces a new
define DEBUG_CHAOS, and mechanism to randomly
return an error condition from functions that
will seldom do so. Functions that handle the
allocation of memory get the first treatment.
Review: https://reviewboard.asterisk.org/r/4463/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433060 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Updated some documentation stating that endpoint identifiers registered without
a name are place at the front of the lookup list. Also renamed register method
'ast_sip_register_endpoint_identifier_by_name' to
'ast_sip_register_endpoint_identifier_with_name'
ASTERISK-24840
Reported by: Mark Michelson
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433031 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes previously reverted code that caused binary incompatibility
problems with some modules. And like the original patch it makes sure that
no matter what order the endpoint identifier modules were loaded, priority is
given based on the ones specified in the new global 'endpoint_identifier_order'
option.
ASTERISK-24840
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4489/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433028 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Due to a break in binary compatibility with some other modules these changes
are being reverted until the issue can be resolved.
ASTERISK-24840
Reported by: Mark Michelson
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RAII_VAR, which is used extensively in Asterisk to manage reference counted
resources, uses a GCC extension to automatically invoke a cleanup function
when a variable loses scope. While this functionality is incredibly useful
and has prevented a large number of memory leaks, it also prevents Asterisk
from being compiled with clang.
This patch updates the RAII_VAR macro such that it can be compiled with clang.
It makes use of the BlocksRuntime, which allows for a closure to be created
that performs the actual cleanup.
Note that this does not attempt to address the numerous warnings that the clang
compiler catches in Asterisk.
Much thanks for this patch goes to:
* The folks on StackOverflow who asked this question and Leushenko for
providing the answer that formed the basis of this code:
http://stackoverflow.com/questions/24959440/rewrite-gcc-cleanup-macro-with-nested-function-for-clang
* Diederik de Groot, who has been extremely patient in working on getting this
patch into Asterisk.
Review: https://reviewboard.asterisk.org/r/4370/
ASTERISK-24133
ASTERISK-23666
ASTERISK-20399
ASTERISK-20850 #close
Reported by: Diederik de Groot
patches:
RAII_CLANG.patch uploaded by Diederik de Groot (License 6600)
........
Merged revisions 432807 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432808 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a type=global section is not defined in pjsip.conf the global
defaults are not applied. As a result the mandatory Max-Forwards header
is not added to SIP messages for res_pjsip/chan_pjsip.
The handling of pjsip.conf type=global objects has several problems:
1) If the global object is missing the defaults are not applied.
2) If the global object is missing the default_outbound_endpoint's default
value is not returned by ast_sip_global_default_outbound_endpoint().
3) Defines are needed so default values only need to be changed in one
place.
* Added a sorcery instance observer callback to check if there were any
type=global sections loaded. If there were more than one then issue an
error message. If there were none then apply the global defaults.
* Fixed ast_sip_global_default_outbound_endpoint() to return the
documented default when no type=global object is defined.
* Made defines for the global default values.
* Increased the default_useragent[] size because SVN version strings can
get lengthy and 128 characters may not be enough.
* Fixed an off-nominal code path ref leak in global_alloc() if the string
fields fail to initialize.
* Eliminated RAII_VAR in get_global_cfg() and
ast_sip_global_default_outbound_endpoint().
ASTERISK-24807 #close
Reported by: Anatoli
Review: https://reviewboard.asterisk.org/r/4467/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432766 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A race condition happened between initiating a transfer and requesting
that a dialog termination be delayed. Occasionally, the transferrer
channels would exit the bridge and hangup before the dialog termination
delay was requested.
* Made request dialog termination delay before initiating the transfer
action. If the transfer fails then cancel the delayed dialog termination
request.
ASTERISK-24755 #close
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/4460/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432668 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It's possible to have a scenario that will create a conflict between endpoint
identifiers. For instance an incoming call could be identified by two different
endpoint identifiers and the one chosen depended upon which identifier module
loaded first. This of course causes problems when, for example, the incoming
call is expected to be identified by username, but instead is identified by ip.
This patch adds a new 'global' option to res_pjsip called
'endpoint_identifier_order'. It is a comma separated list of endpoint
identifier names that specifies the order by which identifiers are processed
and checked.
ASTERISK-24840 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4455/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sending the following ARI commands caused Asterisk to crash if the JSON
body 'variables' object passes values of types other than strings.
POST /ari/channels
POST /ari/channels/{channelid}
PUT /ari/endpoints/sendMessage
PUT /ari/endpoints/{tech}/{resource}/sendMessage
* Eliminated RAII_VAR usage in ast_ari_channels_originate_with_id(),
ast_ari_channels_originate(), ast_ari_endpoints_send_message(), and
ast_ari_endpoints_send_message_to_endpoint().
ASTERISK-24751 #close
Reported by: jeffrey putnam
Review: https://reviewboard.asterisk.org/r/4447/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432404 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a self-destruction option to the
dial api. The usefulness of this is mostly when
using async mode to spawn a separate thread used
to handle the new call, while the calling thread
is allowed to go on about other business.
The only alternative to this option would be the
calling thread spawning a new thread, or hanging
around itself waiting to destroy the dial struct
after completion.
Example of use (minus error checking):
struct ast_dial *dial = ast_dial_create();
ast_dial_append(dial, "PJSIP", "200", NULL);
ast_dial_option_global_enable(dial, AST_DIAL_OPTION_ANSWER_EXEC, "Echo");
ast_dial_option_global_enable(dial, AST_DIAL_OPTION_SELF_DESTROY, NULL);
ast_dial_run(dial, NULL, 1);
The dial_run call will return almost immediately
after spawning the new thread to run and monitor
the dial. If the call is answered, it is placed
into the echo app. When completed, it will call
ast_dial_destroy() on the dial structure.
Note that any allocations made to pass values to
ast_dial_set_user_data() or dial options must be
free'd in a state callback function on any of:
AST_DIAL_RESULT_UNASWERED,
AST_DIAL_RESULT_ANSWERED,
AST_DIAL_RESULT_HANGUP, or
AST_DIAL_RESULT_TIMEOUT.
Review: https://reviewboard.asterisk.org/r/4443/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@432385 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a new feature to ARI to redirect a channel to another server,
and fixes a few bugs in PJSIP's handling of the Transfer dialplan
application/ARI redirect capability.
*New Feature*
A new operation has been added to the ARI channels resource, redirect. With
this, a channel in a Stasis application can be redirected to another endpoint
of the same underlying channel technology.
*Bug fixes*
In the process of writing this new feature, two bugs were fixed in the PJSIP
stack:
(1) The existing .transfer channel callback had the limitation that it could
only transfer channels to a SIP URI, i.e., you had to pass
'PJSIP/sip:foo@my_provider.com' to the dialplan application. While this is
still supported, it is somewhat unintuitive - particularly in a world full
of endpoints. As such, we now also support specifying the PJSIP endpoint to
transfer to.
(2) res_pjsip_multihomed was, unfortunately, trying to 'help' a 302 redirect by
updating its Contact header. Alas, that resulted in the forwarding
destination set by the dialplan application/ARI resource/whatever being
rewritten with very incorrect information. Hence, we now don't bother
updating an outgoing response if it is a 302. Since this took a looong time
to find, some additional debug statements have been added to those modules
that update the Contact headers.
Review: https://reviewboard.asterisk.org/r/4316/
ASTERISK-24015 #close
Reported by: Private Name
ASTERISK-24703 #close
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431717 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are three CLI commands to stop and restart Asterisk each.
1) core stop/restart now - Hangup all calls and stop or restart Asterisk.
New channels are prevented while the shutdown request is pending.
2) core stop/restart gracefully - Stop or restart Asterisk when there are
no calls remaining in the system. New channels are prevented while the
shutdown request is pending.
3) core stop/restart when convenient - Stop or restart Asterisk when there
are no calls in the system. New calls are not prevented while the
shutdown request is pending.
ARI has made stopping/restarting Asterisk more problematic. While a
shutdown request is pending it is desirable to continue to process ARI
HTTP requests for current calls. To handle the current calls while a
shutdown request is pending, a new committed to shutdown phase is needed
so ARI applications can deal with the calls until the system is fully
committed to shutdown.
* Added a new shutdown committed phase so ARI applications can deal with
calls until the final committed to shutdown phase is reached.
* Made refuse new HTTP requests when the system has reached the final
system shutdown phase. Starting anything while the system is actively
releasing resources and unloading modules is not a good thing.
* Split the bridging framework shutdown to not cleanup the global bridging
containers when shutting down in a hurry. This is similar to how other
modules prevent crashes on rapid system shutdown.
* Moved ast_begin_shutdown(), ast_cancel_shutdown(), and
ast_shutting_down(). You should not have to include channel.h just to
access these system functions.
ASTERISK-24752 #close
Reported by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/4399/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add ast_module_shutdown_ref for use by modules that can
only be unloaded during graceful shutdown.
When REF_DEBUG is enabled:
* Add an empty ao2 object to struct ast_module.
* Allocate ao2 object when the module is loaded.
* Perform an ao2_ref in each place where mod->usecount is manipulated.
* ao2_cleanup on module unload.
ASTERISK-24479 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4141/
........
Merged revisions 431662 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431663 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added a new config property [servername] to the http.conf file; updated the http server to use the new property when sending responses, for showing http status through the CLI and when reporting status through the 'httpstatus' webpage.
ASTERISK-24316 #close
Reported By: Andrew Nagy
Review: https://reviewboard.asterisk.org/r/4374/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431471 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When swapping a Local channel in place of one already
in a bridge (to complete a bridge attended transfer),
the channel that was swapped out can actually be hung
up before the stasis bridge push callback executes on
the independant transfer thread. This results in the
stasis app loop dropping out and removing the control
that has the the app name which the local replacement
channel needs so it can re-enter stasis.
To avoid this race condition a new push_peek callback
has been added, and called from the ast_bridge_impart
thread before it launches the independant thread that
will complete the transfer. Now the stasis push_peek
callback can copy the stasis app name before the swap
channel can hang up.
ASTERISK-24649
Review: https://reviewboard.asterisk.org/r/4382/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431450 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses compilation errors on OS X. It's been a while, so
there's quite a few things.
* Fixed __attribute__ decls in route.h to be portable.
* Fixed htonll and ntohll to work when they are defined as macros.
* Replaced sem_t usage with our ast_sem wrapper.
* Added ast_sem_timedwait to our ast_sem wrapper.
* Fixed some GCC 4.9 warnings using sig*set() functions.
* Fixed some format strings for portability.
* Fixed compilation issues with res_timing_kqueue (although tests still fail
on OS X).
* Fixed menuconfig /sbin/launchd detection, which disables res_timing_kqueue
on OS X).
ASTERISK-24539 #close
Reported by: George Joseph
ASTERISK-24544 #close
Reported by: George Joseph
Review: https://reviewboard.asterisk.org/r/4327/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431092 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When code imparts a channel into a bridge to swap with another channel, a
ref needs to be held on the swap channel to ensure that it cannot
dissapear before finding it in the bridge.
* The ast_bridge_join() swap channel parameter now always steals a ref for
the swap channel. This is the only change to the bridge framework's
public API semantics.
* bridge_channel_internal_join() now requires the bridge_channel->swap
channel to pass in a ref.
ASTERISK-24649
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/4354/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430975 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The 'pjsip_get_dest_info' function is used to determine if the signaling transport
of the dialog is secure or not. This function was added in PJSIP 2.3 and does not
exist in earlier versions.
This configure check allows Asterisk to build and run with older versions at the
loss of the 'secure' argument for the PJSIP CHANNEL dialplan function. Usage of
this argument will require upgrading to PJSIP 2.3.
ASTERISK-24665 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4329/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Reverted the change to astman_send_listack() to not use the listflag
parameter and always set the value to "Start" so the start capitalization
is consistent. Unfortunately changing the case of a returned value is not
a backward compatible change so for now FAXSessions is going to have to
remain inconsistent with all of the other AMI list actions.
* Reverted the minor protocol error fix in action_getconfig() when no
requested categories are found. Each line needs to be formatted as
"Header: text".
Caught by the testsuite.
ASTERISK-24049
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The security event log uses a dynamic log level (SECURITY) that is registered
with the Asterisk logging core. Unfortunately, the syslog would ignore log
statements that had a dynamic log level associated with them. Because the
syslog cannot handle ad hoc dynamic log levels, this patch treats any dynamic
log entries sent to the syslog as logs with a level of NOTICE.
ASTERISK-20744 #close
Reported by: Michael Keuter
Tested by: Michael L. Young, Jacek Konieczny
patches:
asterisk-20744-syslog-dynamic-logging_trunk.diff uploaded by Michael L. Young (license 5026)
........
Merged revisions 430506 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430507 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made the following AMI actions use list API calls for consistency:
Agents
BridgeInfo
BridgeList
BridgeTechnologyList
ConfbridgeLIst
ConfbridgeLIstRooms
CoreShowChannels
DAHDIShowChannels
DBGet
DeviceStateList
ExtensionStateList
FAXSessions
Hangup
IAXpeerlist
IAXpeers
IAXregistry
MeetmeList
MeetmeListRooms
MWIGet
ParkedCalls
Parkinglots
PJSIPShowEndpoint
PJSIPShowEndpoints
PJSIPShowRegistrationsInbound
PJSIPShowRegistrationsOutbound
PJSIPShowResourceLists
PJSIPShowSubscriptionsInbound
PJSIPShowSubscriptionsOutbound
PresenceStateList
PRIShowSpans
QueueStatus
QueueSummary
ShowDialPlan
SIPpeers
SIPpeerstatus
SIPshowregistry
SKINNYdevices
SKINNYlines
Status
VoicemailUsersList
* Incremented the AMI version to 2.7.0.
* Changed astman_send_listack() to not use the listflag parameter and
always set the value to "Start" so the start capitalization is consistent.
i.e., The FAXSessions used "Start" while the rest of the system used
"start". The corresponding complete event always used "Complete".
* Fixed ami_show_resource_lists() "PJSIPShowResourceLists" to output the
AMI ActionID for all of its list events.
* Fixed off-nominal AMI protocol error in manager_bridge_info(),
manager_parking_status_single_lot(), and
manager_parking_status_all_lots(). Use of astman_send_error() after
responding to the original AMI action request violates the action response
pattern by sending two responses.
* Fixed minor protocol error in action_getconfig() when no requested
categories are found. Each line needs to be formatted as "Header: text".
* Fixed off-nominal memory leak in manager_build_parked_call_string().
* Eliminated unnecessary use of RAII_VAR() in ami_subscription_detail().
ASTERISK-24049 #close
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/4315/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430434 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change makes the T.38 negotiation timeout configurable via
't38timeout' in res_fax.conf or FAXOPT(t38timeout). It was previously
hard coded to be 5000 milliseconds.
This change also handles T.38 switch failures by aborting the fax since
in the case where this can happen, both sides have agreed to switch to
T.38 and Asterisk is unable to do so.
Review: https://reviewboard.asterisk.org/r/4320/
........
Merged revisions 430415 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430416 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Let's say you have a template T with variable VAR1 = ON and you have a
context C(T) that doesn't specify VAR1. If you read C, the effective value
of VAR1 is ON. Now you change T VAR1 to OFF and call
ast_config_text_file_save. The current behavior is that the file gets
re-written with T/VAR1=OFF but C/VAR1=ON is added. Personally, I think this
is a bug. It's preserving the effective state of C even though I didn't
specify C/VAR1 in th first place. I believe the behavior should be that if
I didn't specify C/VAR1 originally, then the effective value of C/VAR1 should
continue to follow the inherited state. Now, if I DID explicitly specify
C/VAR1, the it should be preserved even if the template changes.
Even though I think the existing behavior is a bug, it's been that way forever
so I'm not changing it. Instead, I've created ast_config_text_file_save2()
that takes a bitmask of flags, one of which is to preserve the effective context
(the current behavior). The original ast_config_text_file_save calls *2 with
the preserve flag. If you want the new behavior, call *2 directly without a
flag.
I've also updated Manager UpdateConfig with a new parameter
'PreserveEffectiveContext' whose default is 'yes'. If you want the new behavior
with UpdateConfig, set 'PreserveEffectiveContext: no'.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4297/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430295 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The PJSIP_AOR dialplan function allows inspection of configured AORs including
what contacts are currently bound to them.
The PJSIP_CONTACT dialplan function allows inspection of contacts in existence.
These can include both externally added (by way of registration) or permanent
ones.
ASTERISK-24341
Reported by: xrobau
Review: https://reviewboard.asterisk.org/r/4308/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430179 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Note that this is backport from trunk of r425825.
This change adds a module which is configurable using the keep_alive_interval setting in the
global section that will send a CRLF keep alive to all active connection-oriented transports at
the provided interval. This is useful because it can help keep connections open through NATs.
This functionality also exists within PJSIP but can not be controlled at runtime and requires
recompiling it.
Review: https://reviewboard.asterisk.org/r/4084/
ASTERISK-24644 #close
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430084 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The QUEUESTART log entry has historically acted like a fully booted event
for the queue_log file. When the QUEUESTART entry was posted to the log
was broken by the change made by ASTERISK-15863.
* Made post the QUEUESTART queue_log entry when Asterisk fully boots.
This restores the intent of that log entry and happens after realtime has
had a chance to load.
AST-1444 #close
Reported by: Denis Martinez
Review: https://reviewboard.asterisk.org/r/4282/
........
Merged revisions 430009 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@430010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
No functionality change. Just move the definition of ast_module_reload
from _private.h to module.h so it can be public.
Also removed the include of _private.h from manager.c since ast_module_load
was the only reason for including it.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4251/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429542 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch started with David Lee's patch at
https://reviewboard.asterisk.org/r/2826/ and includes a regression fix
introduced by the ASTERISK-22455 patch.
The initialization of a mutex's lock tracking structure was not protected
in a critical section. This is fine for any mutex that is explicitly
initialized, but a static mutex may have its lock tracking double
initialized if multiple threads attempt the first lock simultaneously.
* Added a global mutex to properly serialize initialization of the lock
tracking structure. The painful global lock can be mitigated by adding a
double checked lock flag as discussed on the original review request.
* Defer lock tracking initialization until first use.
* Don't be "helpful" and initialize an uninitialized lock when
DEBUG_THREADS is enabled. Debug code is not supposed to fix or change
normal code behavior. We don't need a lock initialization race that would
force a re-setup of lock tracking. Lock tracking already handles
initialization on first use.
* Properly handle allocation failures of the lock tracking structure.
* No need to initialize tracking data in __ast_pthread_mutex_destroy()
just to turn around and destroy it.
The regression introduced by ASTERISK-22455 is the result of manipulating
a pthread_mutex_t struct outside of the pthread library code. The
pthread_mutex_t struct seems to have a global linked list pointer member
that can get changed by other threads. Therefore, saving and restoring
the contents of a pthread_mutex_t struct is a bad thing.
Thanks to Thomas Airmont for finding this obscure regression.
* Don't overwrite the struct ast_lock_track.reentr_mutex member to restore
tracking data in __ast_cond_wait() and __ast_cond_timedwait(). The
pthread_mutex_t struct must be treated as a read-only opaque variable.
Miscellaneous other items fixed by this patch:
* Match ast_suspend_lock_info() with ast_restore_lock_info() in
__ast_cond_timedwait().
* Made some uninitialized lock sanity checks return EINVAL and try a
DO_THREAD_CRASH.
* Fix bad canlog initialization expressions.
ASTERISK-24614 #close
Reported by: Thomas Airmont
Review: https://reviewboard.asterisk.org/r/4247/
Review: https://reviewboard.asterisk.org/r/2826/
........
Merged revisions 429539 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429540 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When shutting down Asterisk the codecs are cleaned up. As a result anything
attempting to get a codec based on ID or details will find that no codec
exists. This currently occurs when determining the sample count of a frame.
This code did not take this situation into account.
This change fixes this by getting the codec directly from the format and
eliminates the lookup. This is both faster and also provides a guarantee
that the codec will exist and will be valid.
ASTERISK-24604 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/4260/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Given the scenario where a PJSIP channel is in a native RTP bridge with direct
media and the channel is then hung up the code will currently re-INVITE the channel
back to Asterisk and send a BYE at the same time. Many SIP implementations dislike
this greatly.
This change makes it so that if a re-INVITE transaction is in progress the BYE
is queued to occur after the completion of the transaction (be it through normal
means or a timeout).
Review: https://reviewboard.asterisk.org/r/4248/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429409 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When endpoints with direct_media enabled, behind a firewall (Asterisk on a
separate network) and were bridged sometimes Asterisk would send the ip
address of the firewall in the sdp to one of the phones in the reinvite
resulting in one way audio. When sending the reinvite Asterisk will retrieve
the media address from the associated rtp instance, but if frames were being
read this can be overwritten with another address (in this case the
firewall's). This patch ensures that Asterisk uses the original device
address when using direct media.
ASTERISK-24563
Reported by: Steve Pitts
Review: https://reviewboard.asterisk.org/r/4216/
........
Merged revisions 429195 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429196 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AMI/ARI are getting a few enhancements in the next release of Asterisk 13. Per
semantic versioning, that warrants a bump in the minor version number, as it
reflects a backwards compatible change. Hence, this commit.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This corrects several bugs that currently exist in the stasis
application code.
* After a masquerade, the resulting channels have channel topics that
do not match their uniqueids
** Masquerades now swap channel topics appropriately
* StasisStart and StasisEnd messages are leaked to observer
applications due to being published on channel topics
** StasisStart and StasisEnd publishing is now properly restricted
to controlling apps via app topics
* Race conditions exist where StasisStart and StasisEnd messages due to
a masquerade may be received out of order due to being published on
different topics
** These messages are now published directly on the app topic so this
is now a non-issue
* StasisEnds are sometimes missing when sent due to masquerades and
bridge swaps into and out of Stasis()
** This was due to StasisEnd processing adjusting message-sent flags
after Stasis() had already exited and Stasis() had been re-entered
** This was corrected by adjusting these flags prior to sending the
message while the initial Stasis() application was still shutting
down
Review: https://reviewboard.asterisk.org/r/4213/
ASTERISK-24537 #close
Reported by: Matt DiMeo
........
Merged revisions 429061 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@429062 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, all Stasis subscriptions would receive a dedicated
thread for servicing published messages. In contrast, prior to r400178
(see review https://reviewboard.asterisk.org/r/2881/), the subscriptions
shared a thread pool. It was discovered during some initial work on Stasis
that, for a low subscription count with high message throughput, the
threadpool was not as performant as simply having a dedicated thread per
subscriber.
For situations where a subscriber receives a substantial number of messages
and is always present, the model of having a dedicated thread per subscriber
makes sense. While we still have plenty of subscriptions that would follow
this model, e.g., AMI, CDRs, CEL, etc., there are plenty that also fall into
the following two categories:
* Large number of subscriptions, specifically those tied to endpoints/peers.
* Low number of messages. Some subscriptions exist specifically to coordinate
a single message - the subscription is created, a message is published, the
delivery is synchronized, and the subscription is destroyed.
In both of the latter two cases, creating a dedicated thread is wasteful (and
in the case of a large number of peers/endpoints, harmful). In those cases,
having shared delivery threads is far more performant.
This patch adds the ability of a subscriber to Stasis to choose whether or not
their messages are dispatched on a dedicated thread or on a threadpool. The
threadpool is configurable through stasis.conf.
Review: https://reviewboard.asterisk.org/r/4193
ASTERISK-24533 #close
Reported by: xrobau
Tested by: xrobau
........
Merged revisions 428681 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428687 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_string_fields_copy relies on the fact that
__ast_string_field_release_active never previously
zeroed pool->used, so keeping the existing pointer
was "ok". Now that existing pools can be reset to
'empty', it is important to set each field to
__ast_string_field_empty after releasing the memory.
ASTERISK-24535 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4186/
........
Merged revisions 428272 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428273 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Optimistic SRTP is the ability to enable SRTP but not have it be
a fatal requirement. If SRTP can be used it will be, if not it won't be.
This gives you a better chance of using it without having your sessions
fail when it can't be.
Encrypt all the things!
Review: https://reviewboard.asterisk.org/r/3992/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428222 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This allows for a configurable number of attempts for a transferer
to dial an extension to transfer the call to. For Asterisk 13, the
default values are such that upgrading between versions will not
cause a behaivour change. For trunk, though, the defaults will be
changed to be more user-friendly.
Review: https://reviewboard.asterisk.org/r/4167
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428145 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From reviewboard:
"During blind transfer testing, it was noticed that tests were failing
occasionally because the ARI blind transfer event was not being sent.
After investigating, I detected a race condition in the blind transfer
code. When blind transferring a single channel, the actual transfer
operation (i.e. removing the transferee from the bridge and directing
them to the proper dialplan location) is queued onto the transferee
bridge channel. After queuing the transfer operation, the blind transfer
Stasis message is published. At the time of publication, snapshots of
the channels and bridge involved are created. The ARI subscriber to the
blind transfer Stasis message then attempts to determine if the bridge
or any of the involved channels are subscribed to by ARI applications.
If so, then the blind transfer message is sent to the applications. The
way that the ARI blind transfer message handler works is to first see
if the transferer channel is subscribed to. If not, then iterate over
all the channel IDs in the bridge snapshot and determine if any of
those are subscribed to. In the test we were running, the lone
transferee channel was subscribed to, so an ARI event should have been
sent to our application. Occasionally, though, the bridge snapshot did
not have any channels IDs on it at all. Why?
The problem is that since the blind transfer operation is handled by a
separate thread, it is possible that the transfer will have completed and
the channels removed from the bridge before we publish the blind transfer
Stasis message. Since the blind transfer has completed, the bridge on
which the transfer occurred no longer has any channels on it, so the
resulting bridge snapshot has no channels on it. Through investigation of
the code, I found that attended transfers can have this issue too for the
case where a transferee is transferred to an application."
The fix employed here is to decouple the creation of snapshots for the transfer
messages from the publication of the transfer messages. This way, snapshots
can be created to reflect what they are at the time of the transfer operation.
Review: https://reviewboard.asterisk.org/r/4135
........
Merged revisions 427848 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427870 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change corrects message ordering in cases where a channel-related
message can be received after a Stasis/ARI application has received the
StasisEnd message. The StasisEnd message was being passed to
applications directly without waiting for the channel topic to empty.
As a result of this fix, other bugs were also identified and fixed:
* StasisStart messages were also being sent directly to apps and are
now routed through the stasis message bus properly
* Masquerade monitor datastores were being removed at the incorrect
time in some cases and were causing StasisEnd messages to not be sent
* General refactoring where necessary for the above
* Unsubscription on StasisEnd timing changes to prevent additional
messages from following the StasisEnd when they shouldn't
A channel sanitization function pointer was added to reduce processing
and AO2 lookups.
Review: https://reviewboard.asterisk.org/r/4163/
ASTERISK-24501 #close
Reported by: Matt Jordan
........
Merged revisions 427788 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427789 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a config file is read, an unescaped semicolon signals comments which are
stripped from the value before it's stored. Escaped semicolons are then
unescaped and become part of the value. Both of these behaviors are normal
and expected. When the config is serialized either by 'dialplan save' or
AMI/UpdateConfig however, the now unescaped semicolons are written as-is.
If you actually reload the file just saved, the unescaped semicolons are
now treated as start of comments.
Since true comments are stripped on read, any semicolons in
ast_variable.value must have been escaped originally. This patch
re-escapes semicolons in ast_variable.values before they're written to
file either by 'dialplan save' or config/ast_config_text_file_save which
is called by AMI/UpdateConfig. I also fixed a few pre-existing formatting
issues nearby in pbx_config.c
Tested-by: George Joseph
ASTERISK-20127 #close
Review: https://reviewboard.asterisk.org/r/4132/
........
Merged revisions 427275 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427276 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Because opus transcoding support cannot be included in the standard Asterisk
distribution, a few codec_opus implementations have popped up. To make it
easier for people to drop in opus support in their own installations, this
patch adds configure checks for libopus.
Review: https://reviewboard.asterisk.org/r/4106/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@426234 65c4cc65-6c06-0410-ace0-fbb531ad65f3
gcc on the ARM platform defaults 'char' to 'unsigned char' whereas Intel and
SPARC default to 'signed char'. This is only an issue in the rare cases where
negative values are assigned to a 'char' but this this patch insures
compatibility by detecting platforms that default to 'unsigned' and adding an
'-fsigned-char' flag to _ASTCFLAGS.
If compiling for ARM (native or cross-compile) be sure to run ./bootstrap.sh
and ./configure to regenerate the build files. You shouldn't have to do this
for Intel or SPARC.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4091/
........
Merged revisions 425964 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425965 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With MALLOC_DEBUG the /main/config config_basic_ops test was causing a
SEGV while doing an ast_category_delete in an ast_category_browse loop.
Apparently this never worked but was also never tested. I removed the
test, added 2 notes to config.h indicating that it's not supported and
added a few lines of code to ast_category_delete to prevent the SEGV
should someone attempt it in the future.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4078/
........
Merged revisions 425525 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425526 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Richard Mudgett
George Joseph
Kevin Harwell
Joshua Colp
Daniel Journo
Diederik de Groot
Matt Jordan
Corey Farrell
Dade Brandon
Jonathan Rose
Walter Doekes
David M. Lee
Alexander Traud
tcambron
Mark Michelson
Scott Emidy
Mark Duncan
Benjamin Ford
Ivan Poddubny
Rodrigo Ramírez Norambuena
Scott Griepentrog
Ashley Sanders
David M. Lee
Kinsey Moore
Sean Bright